# WRT160NL WAP / WDS-Sta / WDS-AP dd-wrt build 28579 BusyBox v1.24.1 (2015-12-22 02:10:46 CET) built-in shell (ash) root@WRT16NL-AP:~# uptime 11:42:00 up 1 day, 33 min, load average: 0.02, 0.02, 0.04 root@WRT16NL-AP:~# free total used free shared buffers cached Mem: 29084 18788 10296 0 2216 6268 -/+ buffers/cache: 10304 18780 Swap: 0 0 0 root@WRT16NL-AP:~# dmesg | tail <6>[ 15.120000] br0: port 3(ath0) entered forwarding state <6>[ 15.120000] br0: port 3(ath0) entered forwarding state <6>[ 15.140000] device ath0.1 entered promiscuous mode <6>[ 15.140000] br1: port 1(ath0.1) entered listening state <6>[ 15.150000] br1: port 1(ath0.1) entered listening state <6>[ 17.120000] br0: port 3(ath0) entered forwarding state <6>[ 17.150000] br1: port 1(ath0.1) entered learning state <6>[ 19.150000] br1: topology change detected, propagating <6>[ 19.150000] br1: port 1(ath0.1) entered forwarding state <6>[ 33.920000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead. root@WRT16NL-AP:~# exit Connection closed by foreign host. BusyBox v1.24.1 (2015-12-22 02:10:46 CET) built-in shell (ash) root@160NL-WDS-North:~# uptime 11:42:49 up 1 day, 36 min, load average: 0.00, 0.01, 0.04 root@160NL-WDS-North:~# free total used free shared buffers cached Mem: 29084 18132 10952 0 1124 7624 -/+ buffers/cache: 9384 19700 Swap: 0 0 0 root@160NL-WDS-North:~# dmesg | tail <6>[77865.710000] br0: port 3(ath0) entered disabled state <6>[77866.960000] ath0: authenticate with 00:25:9c:c0:6a:cd <6>[77866.990000] ath0: send auth to 00:25:9c:c0:6a:cd (try 1/3) <6>[77867.000000] ath0: authenticated <6>[77867.020000] ath0: associate with 00:25:9c:c0:6a:cd (try 1/3) <6>[77867.030000] ath0: RX AssocResp from 00:25:9c:c0:6a:cd (capab=0x411 status=0 aid=1) <6>[77867.040000] ath0: associated <6>[77868.060000] br0: port 3(ath0) entered forwarding state <6>[77868.060000] br0: port 3(ath0) entered forwarding state <6>[77870.060000] br0: port 3(ath0) entered forwarding state root@160NL-WDS-North:~# dmesg <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 <5>[ 0.000000] Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd init=/sbin/init <6>[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) <6>[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) <6>[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) <6>[ 0.000000] Writing ErrCtl register=00000000 <6>[ 0.000000] Readback ErrCtl register=00000000 <6>[ 0.000000] Memory: 28876k/32768k available (2335k kernel code, 3892k reserved, 398k data, 208k init, 0k highmem) <6>[ 0.000000] NR_IRQS:83 <0>[ 0.000000] irq init done <4>[ 0.000000] plat_time_init: plat time init done <6>[ 0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) <6>[ 0.080000] pid_max: default: 32768 minimum: 301 <6>[ 0.080000] Mount-cache hash table entries: 512 <6>[ 0.090000] NET: Registered protocol family 16 <6>[ 0.120000] bio: create slab at 0 <5>[ 0.120000] SCSI subsystem initialized <6>[ 0.130000] usbcore: registered new interface driver usbfs <6>[ 0.130000] usbcore: registered new interface driver hub <6>[ 0.140000] usbcore: registered new device driver usb <6>[ 0.140000] Switching to clocksource MIPS <6>[ 0.150000] NET: Registered protocol family 2 <6>[ 0.150000] TCP established hash table entries: 512 (order: 0, 4096 bytes) <6>[ 0.160000] TCP bind hash table entries: 512 (order: -1, 2048 bytes) <6>[ 0.170000] TCP: Hash tables configured (established 512 bind 512) <6>[ 0.170000] TCP: reno registered <6>[ 0.180000] UDP hash table entries: 256 (order: 0, 4096 bytes) <6>[ 0.180000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) <6>[ 0.190000] NET: Registered protocol family 1 <5>[ 0.190000] gpio_proc: module loaded and /proc/gpio/ created <6>[ 0.200000] Register LED Device <5>[ 0.200000] wl0gpio_proc: module loaded and /proc/wl0gpio/ created <4>[ 0.210000] AR7100 GPIOC major 0 <6>[ 0.220000] squashfs: version 3.0 (2006/03/15) Phillip Lougher <6>[ 0.220000] msgmni has been set to 56 <6>[ 0.230000] io scheduler noop registered <6>[ 0.230000] io scheduler deadline registered (default) <6>[ 0.240000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled <6>[ 0.260000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 19) is a 16550A <6>[ 0.270000] console [ttyS0] enabled, bootconsole disabled <0>[ 0.280000] guessed flashsize = 8M <0>[ 0.290000] scanning for root partition <0>[ 0.290000] WRT160NL/E2100L uboot detected <0>[ 0.300000] bootloader size = 40000 <0>[ 0.300000] <0>[ 0.300000] found squashfs at 193000 <5>[ 0.310000] Creating 8 MTD partitions on "ar7100-nor0": <5>[ 0.310000] 0x000000000000-0x000000040000 : "RedBoot" <5>[ 0.320000] 0x000000040000-0x0000007e0000 : "linux" <5>[ 0.330000] 0x000000193000-0x000000790000 : "rootfs" <4>[ 0.330000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only <5>[ 0.350000] mtd: partition "rootfs" set to be root filesystem <5>[ 0.350000] 0x000000790000-0x0000007e0000 : "ddwrt" <5>[ 0.360000] 0x0000007e0000-0x0000007f0000 : "nvram" <5>[ 0.370000] 0x0000007f0000-0x000000800000 : "FIS directory" <5>[ 0.370000] 0x0000007f0000-0x000000800000 : "board_config" <5>[ 0.380000] 0x000000000000-0x000000800000 : "fullflash" <4>[ 0.390000] ->Oops: flash id 0xc22017 . <6>[ 0.390000] tun: Universal TUN/TAP device driver, 1.6 <6>[ 0.400000] tun: (C) 1999-2004 Max Krasnyansky <6>[ 0.800000] PPP generic driver version 2.4.2 <6>[ 0.810000] PPP BSD Compression module registered <6>[ 0.810000] PPP Deflate Compression module registered <6>[ 0.820000] PPP MPPE Compression module registered <6>[ 0.820000] NET: Registered protocol family 24 <6>[ 0.830000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 0.860000] ar71xx-ehci ar71xx-ehci.0: Atheros AR91xx built-in EHCI controller <6>[ 0.870000] ar71xx-ehci ar71xx-ehci.0: new USB bus registered, assigned bus number 1 <6>[ 0.910000] ar71xx-ehci ar71xx-ehci.0: irq 3, io mem 0x1b000000 <6>[ 0.930000] ar71xx-ehci ar71xx-ehci.0: USB 2.0 started, EHCI 1.00 <6>[ 0.930000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 <6>[ 0.940000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 0.950000] usb usb1: Product: Atheros AR91xx built-in EHCI controller <6>[ 0.950000] usb usb1: Manufacturer: Linux 3.10.94 ehci_hcd <6>[ 0.960000] usb usb1: SerialNumber: platform <6>[ 0.960000] hub 1-0:1.0: USB hub found <6>[ 0.970000] hub 1-0:1.0: 1 port detected <6>[ 0.980000] u32 classifier <6>[ 0.980000] Performance counters on <6>[ 0.990000] input device check on <6>[ 0.990000] Actions configured <6>[ 1.000000] Netfilter messages via NETLINK v0.30. <6>[ 1.000000] nf_conntrack version 0.5.0 (451 buckets, 1804 max) <4>[ 1.010000] nf_conntrack_rtsp v0.6.21 loading <4>[ 1.010000] nf_nat_rtsp v0.6.21 loading <6>[ 1.020000] ip_tables: (C) 2000-2006 Netfilter Core Team <6>[ 1.020000] TCP: westwood registered <6>[ 1.020000] TCP: hybla registered <6>[ 1.030000] TCP: vegas registered <6>[ 1.030000] NET: Registered protocol family 17 <5>[ 1.040000] Bridge firewalling registered <6>[ 1.040000] 8021q: 802.1Q VLAN Support v1.8 <6>[ 1.050000] searching for nvram <6>[ 1.050000] nvram size = 0 <6>[ 1.080000] Atheros AR71xx hardware watchdog driver version 0.1.0 <6>[ 1.090000] ar71xx-wdt: timeout=15 secs (max=21) ref freq=200000000 <6>[ 1.100000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. <6>[ 1.110000] Freeing unused kernel memory: 208K (8030c000 - 80340000) <6>[ 1.310000] usb 1-1: new high-speed USB device number 2 using ar71xx-ehci <6>[ 1.740000] usb 1-1: New USB device found, idVendor=0781, idProduct=5406 <6>[ 1.740000] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 <6>[ 1.750000] usb 1-1: Product: U3 Cruzer Micro <6>[ 1.760000] usb 1-1: Manufacturer: SanDisk <6>[ 1.760000] usb 1-1: SerialNumber: 0774900A0300283C <7>[ 3.770000] ar71xx-wdt: enabling watchdog timer <6>[ 3.850000] libphy: ag71xx_mdio: probed <6>[ 4.180000] Registering RTL8306SD switch with Chip ID: 0x5988, version: 0x0000 <6>[ 4.180000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=00008306, driver=Realtek RTL8306S] <6>[ 4.190000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RMII <6>[ 4.520000] ag71xx ag71xx.1: connected to PHY at ag71xx-mdio.0:04 [uid=00008306, driver=Realtek RTL8306S] <6>[ 4.530000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:RMII <6>[ 4.670000] Loading modules backported from Linux version master-2015-12-03-0-g1677f62 <6>[ 4.670000] Backport generated by backports.git backports-20151120-0-g906a6b3 <6>[ 4.840000] cfg80211: World regulatory domain updated: <6>[ 4.840000] cfg80211: DFS Master region: unset <6>[ 4.840000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) <6>[ 4.850000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 4.860000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 4.870000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 4.880000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 4.890000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 4.890000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 4.900000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 4.910000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) <7>[ 5.470000] ath: EEPROM regdomain: 0x0 <7>[ 5.470000] ath: EEPROM indicates default country code should be used <7>[ 5.470000] ath: doing EEPROM country->regdmn map search <7>[ 5.470000] ath: country maps to regdmn code: 0x3a <7>[ 5.470000] ath: Country alpha2 being used: US <7>[ 5.470000] ath: Regpair used: 0x3a <7>[ 5.510000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' <6>[ 5.510000] ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2122 RF Rev:a2 mem=0xb80c0000, irq=2 <6>[ 5.520000] cfg80211: Regulatory domain changed to country: US <6>[ 5.530000] cfg80211: DFS Master region: FCC <6>[ 5.530000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) <6>[ 5.540000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A) <6>[ 5.550000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2300 mBm), (N/A) <6>[ 5.560000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (N/A) <6>[ 5.570000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (N/A) <6>[ 5.580000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) <6>[ 5.580000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) <7>[ 6.210000] ar71xx: pll_reg 0xb8050014: 0x13000a44 <6>[ 6.210000] eth0: link up (100Mbps/Full duplex) <6>[ 6.420000] usb-storage 1-1:1.0: USB Mass Storage device detected <6>[ 6.430000] scsi0 : usb-storage 1-1:1.0 <6>[ 6.440000] usbcore: registered new interface driver usb-storage <5>[ 7.440000] scsi 0:0:0:0: Direct-Access SanDisk Cruzer 7.01 PQ: 0 ANSI: 0 CCS <5>[ 7.450000] sd 0:0:0:0: Attached scsi generic sg0 type 0 <5>[ 7.460000] scsi 0:0:0:1: CD-ROM SanDisk Cruzer 7.01 PQ: 0 ANSI: 0 <5>[ 7.470000] sd 0:0:0:0: [sda] 15695871 512-byte logical blocks: (8.03 GB/7.48 GiB) <5>[ 7.480000] sd 0:0:0:0: [sda] Write Protect is off <7>[ 7.480000] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 08 <4>[ 7.480000] sr0: scsi3-mmc drive: 48x/48x tray <6>[ 7.490000] cdrom: Uniform CD-ROM driver Revision: 3.20 <7>[ 7.490000] sr 0:0:0:1: Attached scsi CD-ROM sr0 <5>[ 7.490000] sr 0:0:0:1: Attached scsi generic sg1 type 5 <3>[ 7.510000] sd 0:0:0:0: [sda] No Caching mode page found <3>[ 7.510000] sd 0:0:0:0: [sda] Assuming drive cache: write through <3>[ 7.540000] sd 0:0:0:0: [sda] No Caching mode page found <3>[ 7.540000] sd 0:0:0:0: [sda] Assuming drive cache: write through <6>[ 7.630000] sda: sda1 <3>[ 7.650000] sd 0:0:0:0: [sda] No Caching mode page found <3>[ 7.660000] sd 0:0:0:0: [sda] Assuming drive cache: write through <5>[ 7.660000] sd 0:0:0:0: [sda] Attached SCSI removable disk <4>[ 9.070000] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! <4>[ 9.100000] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. <6>[ 9.410000] device br0 entered promiscuous mode <6>[ 9.430000] eth0: link down <6>[ 9.480000] device eth0 entered promiscuous mode <6>[ 9.540000] device eth1 entered promiscuous mode <6>[ 9.550000] br0: port 1(eth0) entered forwarding state <6>[ 9.550000] br0: port 1(eth0) entered forwarding state <6>[ 9.560000] device br0 left promiscuous mode <6>[ 9.560000] device br0 entered promiscuous mode <6>[ 9.590000] device br0 left promiscuous mode <6>[ 9.620000] cfg80211: World regulatory domain updated: <6>[ 9.630000] cfg80211: DFS Master region: unset <6>[ 9.630000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) <6>[ 9.640000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 9.650000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 9.660000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 9.670000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 9.670000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 9.680000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 9.690000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 9.700000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) <6>[ 9.720000] cfg80211: Regulatory domain changed to country: AU <6>[ 9.730000] cfg80211: DFS Master region: ETSI <6>[ 9.730000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) <6>[ 9.740000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 9.750000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A) <6>[ 9.760000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2400 mBm), (N/A) <6>[ 9.760000] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2400 mBm), (N/A) <6>[ 9.770000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) <7>[ 10.250000] ar71xx: pll_reg 0xb8050014: 0x13000a44 <6>[ 10.250000] eth0: link up (100Mbps/Full duplex) <6>[ 11.550000] br0: port 1(eth0) entered forwarding state <6>[ 12.480000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead. <6>[ 15.280000] device ath0 entered promiscuous mode <6>[ 16.440000] ath0: authenticate with 00:25:9c:c0:6a:cd <6>[ 16.470000] ath0: send auth to 00:25:9c:c0:6a:cd (try 1/3) <6>[ 16.490000] ath0: authenticated <6>[ 16.500000] ath0: associate with 00:25:9c:c0:6a:cd (try 1/3) <6>[ 16.500000] ath0: RX AssocResp from 00:25:9c:c0:6a:cd (capab=0x411 status=0 aid=1) <6>[ 16.510000] ath0: associated <6>[ 17.540000] br0: port 3(ath0) entered forwarding state <6>[ 17.550000] br0: port 3(ath0) entered forwarding state <6>[ 19.550000] br0: port 3(ath0) entered forwarding state <6>[77865.700000] ath0: deauthenticated from 00:25:9c:c0:6a:cd (Reason: 2=PREV_AUTH_NOT_VALID) <6>[77865.710000] br0: port 3(ath0) entered disabled state <6>[77866.960000] ath0: authenticate with 00:25:9c:c0:6a:cd <6>[77866.990000] ath0: send auth to 00:25:9c:c0:6a:cd (try 1/3) <6>[77867.000000] ath0: authenticated <6>[77867.020000] ath0: associate with 00:25:9c:c0:6a:cd (try 1/3) <6>[77867.030000] ath0: RX AssocResp from 00:25:9c:c0:6a:cd (capab=0x411 status=0 aid=1) <6>[77867.040000] ath0: associated <6>[77868.060000] br0: port 3(ath0) entered forwarding state <6>[77868.060000] br0: port 3(ath0) entered forwarding state <6>[77870.060000] br0: port 3(ath0) entered forwarding state root@160NL-WDS-North:~# exit Connection closed by foreign host. BusyBox v1.24.1 (2015-12-22 02:10:46 CET) built-in shell (ash) root@160NL-WDS-South:~# uptime 11:43:40 up 1 day, 1:00, load average: 0.06, 0.02, 0.04 root@160NL-WDS-South:~# free total used free shared buffers cached Mem: 29084 16664 12420 0 1400 5596 -/+ buffers/cache: 9668 19416 Swap: 0 0 0 root@160NL-WDS-South:~# dmesg | tail <6>[ 16.840000] br0: port 4(ath0.sta1) entered forwarding state <6>[ 16.850000] br0: port 4(ath0.sta1) entered forwarding state <6>[ 18.090000] br0: port 3(ath0) entered forwarding state <6>[ 18.850000] br0: port 4(ath0.sta1) entered forwarding state <6>[ 385.240000] device ath0.sta1 left promiscuous mode <6>[ 385.250000] br0: port 4(ath0.sta1) entered disabled state <6>[ 1155.540000] device ath0.sta1 entered promiscuous mode <6>[ 1155.540000] br0: port 4(ath0.sta1) entered forwarding state <6>[ 1155.550000] br0: port 4(ath0.sta1) entered forwarding state <6>[ 1157.550000] br0: port 4(ath0.sta1) entered forwarding state root@160NL-WDS-South:~# exit Connection closed by foreign host.