10/22/21
Reset EA8500 and tried samba again ...it's just NO WORKY good :-(
both radios are disabled
set time zone
enabled USB
Setup NAS
has 2 flash drives ---- sda1 & sdb1
seemed fine to copy from but CANNOT copy anything to it ...NOT even a simple text file
However after the reset it didn't put stupid weirdass named xxxxtmp files like it did when I first installed over previous build.
some pictures and added comments below log ...mrjcd
##############
mrjcd@daDeb:~$ telnet 192.168.1.1
Trying 192.168.1.1...
Connected to 192.168.1.1.
Escape character is '^]'.
DD-WRT v3.0-r47581 std (c) 2021 NewMedia-NET GmbH
Release: 10/20/21
Board: Linksys EA8500
DD-WRT login: root
Password:
==========================================================
___ ___ _ _____ ______ ____ ___
/ _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \
/ // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // /
/____/____/ |__/|__/_/|_| /_/ |___/____(_)___/
DD-WRT v3.0
https://www.dd-wrt.com
==========================================================
BusyBox v1.34.1 (2021-10-20 02:37:28 +07) built-in shell (ash)
root@DD-WRT:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux (LTO) version 4.9.287 (root@server2) (gcc version 10.0.1 (OpenWrt GCC 10.0.1 r12423-0493d57e04) ) #518 SMP Tue Oct 19 16:09:00 +07 2021
[ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt:Machine model: Linksys EA8500 WiFi Router
[ 0.000000] OF: fdt:Ignoring memory range 0x41500000 - 0x42000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 122880
[ 0.000000] free_area_init_node: node 0, pgdat c0a2eb40, node_mem_map ddc39000
[ 0.000000] Normal zone: 960 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 122880 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 12 pages/cpu s18956 r8192 d22004 u49152
[ 0.000000] pcpu-alloc: s18956 r8192 d22004 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920
[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:16
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 479264K/491520K available (5120K kernel code, 190K rwdata, 736K rodata, 1024K init, 395K bss, 12256K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xde800000 - 0xff800000 ( 528 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc0800000 (6112 kB)
[ 0.000000] .init : 0xc0900000 - 0xc0a00000 (1024 kB)
[ 0.000000] .data : 0xc0a00000 - 0xc0a2f818 ( 191 kB)
[ 0.000000] .bss : 0xc0a31000 - 0xc0a93ff1 ( 396 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[ 0.000008] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[ 0.000023] Switching to timer-based delay loop, resolution 160ns
[ 0.000243] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[ 0.000268] pid_max: default: 32768 minimum: 301
[ 0.000389] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000405] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.001053] CPU: Testing write buffer coherency: ok
[ 0.001372] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001424] Setting up static identity map for 0x42300000 - 0x4230003c
[ 0.004628] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.004829] Brought up 2 CPUs
[ 0.004851] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[ 0.004864] CPU: All CPU(s) started in SVC mode.
[ 0.018618] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.018648] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.018723] pinctrl core: initialized pinctrl subsystem
[ 0.019926] NET: Registered protocol family 16
[ 0.019985] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[ 0.020339] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.051774] cpuidle: using governor ladder
[ 0.104850] msm_bus_fabric_init_driver
[ 0.106215] pps_core: LinuxPPS API ver. 1 registered
[ 0.106231] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.106277] PTP clock support registered
[ 0.108702] clocksource: Switched to clocksource dg_timer
[ 0.113173] NET: Registered protocol family 2
[ 0.113353] IP idents hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.114313] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.114353] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.114409] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.114474] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.114501] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.114696] NET: Registered protocol family 1
[ 0.114753] PCI: CLS 0 bytes, default 64
[ 0.116185] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.126220] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.132445] cryptodev: driver 1.9 loaded.
[ 0.132484] io scheduler noop registered
[ 0.132500] io scheduler deadline registered (default)
[ 0.134391] 1b500000.pci supply vdda not found, using dummy regulator
[ 0.134502] 1b500000.pci supply vdda_phy not found, using dummy regulator
[ 0.134593] 1b500000.pci supply vdda_refclk not found, using dummy regulator
[ 0.135669] OF: PCI: host bridge /soc/pci@1b500000 ranges:
[ 0.135716] OF: PCI: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[ 0.135745] OF: PCI: MEM 0x08000000..0x0fdfffff -> 0x08000000
[ 0.239081] qcom-pcie 1b500000.pci: link up
[ 0.239272] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[ 0.239296] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.239316] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
[ 0.239333] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[ 0.239388] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.239554] pci 0000:00:00.0: supports D1
[ 0.239565] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.239885] PCI: bus0: Fast back to back transfers disabled
[ 0.240220] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.240474] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.241648] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.242243] PCI: bus1: Fast back to back transfers disabled
[ 0.242562] pci 0000:00:00.0: BAR 14: assigned [mem 0x08000000-0x081fffff]
[ 0.242590] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[ 0.242728] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.242754] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
[ 0.243193] aer 0000:00:00.0:pcie002: service driver aer loaded
[ 0.243696] 1b700000.pci supply vdda not found, using dummy regulator
[ 0.243815] 1b700000.pci supply vdda_phy not found, using dummy regulator
[ 0.243920] 1b700000.pci supply vdda_refclk not found, using dummy regulator
[ 0.244957] OF: PCI: host bridge /soc/pci@1b700000 ranges:
[ 0.244999] OF: PCI: IO 0x31e00000..0x31efffff -> 0x31e00000
[ 0.245025] OF: PCI: MEM 0x2e000000..0x31dfffff -> 0x2e000000
[ 0.349073] qcom-pcie 1b700000.pci: link up
[ 0.349262] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[ 0.349284] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.349300] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[ 0.349349] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.349485] pci 0001:00:00.0: supports D1
[ 0.349498] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[ 0.349778] PCI: bus0: Fast back to back transfers disabled
[ 0.350092] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.350323] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.351409] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.351984] PCI: bus1: Fast back to back transfers disabled
[ 0.352405] pci 0001:00:00.0: BAR 14: assigned [mem 0x2e000000-0x2e1fffff]
[ 0.352431] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[ 0.352556] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 0.352577] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
[ 0.352978] aer 0001:00:00.0:pcie002: service driver aer loaded
[ 0.353468] 1b900000.pci supply vdda not found, using dummy regulator
[ 0.353576] 1b900000.pci supply vdda_phy not found, using dummy regulator
[ 0.353666] 1b900000.pci supply vdda_refclk not found, using dummy regulator
[ 0.354723] OF: PCI: host bridge /soc/pci@1b900000 ranges:
[ 0.354762] OF: PCI: IO 0x35e00000..0x35efffff -> 0x35e00000
[ 0.354788] OF: PCI: MEM 0x32000000..0x35dfffff -> 0x32000000
[ 1.359096] qcom-pcie 1b900000.pci: phy link never came up
[ 1.360940] qcom-pcie 1b900000.pci: hostinit failed
[ 1.361754] deviceless supply s1b not found, using dummy regulator
[ 1.363488] L2 @ QSB rate. Forcing new rate.
[ 1.363659] L2 @ 800000 KHz
[ 1.363772] CPU0 @ 800000 KHz
[ 1.363783] CPU1 @ QSB rate. Forcing new rate.
[ 1.363910] CPU1 @ 800000 KHz
[ 1.366298] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[ 1.368100] serial8250_init
[ 1.368115] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 1.369356] msm_serial 16340000.serial: msm_serial: detected port #0
[ 1.369462] msm_serial 16340000.serial: uartclk = 7372800
[ 1.369544] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 201, base_baud = 460800) is a MSM
[ 1.369580] msm_serial: console setup on port #0
[ 2.116905] console [ttyMSM0] enabled
[ 2.121665] msm_serial: driver initialized
[ 2.127053] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
[ 2.129045] nand: AMD/Spansion S34MS01G2
[ 2.135479] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 2.139908] 19 ofpart partitions found on MTD device qcom_nand.0
[ 2.146765] Creating 19 MTD partitions on "qcom_nand.0":
[ 2.153019] 0x000000000000-0x000000040000 : "SBL1"
[ 2.159580] 0x000000040000-0x000000180000 : "MIBIB"
[ 2.165471] 0x000000180000-0x0000002c0000 : "SBL2"
[ 2.170506] 0x0000002c0000-0x000000540000 : "SBL3"
[ 2.173083] random: fast init done
[ 2.180969] 0x000000540000-0x000000660000 : "DDRCONFIG"
[ 2.183519] 0x000000660000-0x000000780000 : "SSD"
[ 2.188178] 0x000000780000-0x000000a00000 : "TZ"
[ 2.195320] 0x000000a00000-0x000000c80000 : "RPM"
[ 2.200106] 0x000000c80000-0x000000dc0000 : "art"
[ 2.202865] 0x000000dc0000-0x000000ec0000 : "APPSBL"
[ 2.206908] 0x000000ec0000-0x000000f00000 : "u_env"
[ 2.210925] 0x000000f00000-0x000000f40000 : "s_env"
[ 2.215434] 0x000000f40000-0x000000f80000 : "devinfo"
[ 2.220336] 0x000000f80000-0x000003780000 : "linux"
[ 2.282156] 0x000001280000-0x000003780000 : "rootfs"
[ 2.335041] mtd: partition "rootfs" set to be root filesystem
[ 2.335074] 0x000003780000-0x000005f40000 : "linux2"
[ 2.398570] 0x000003a80000-0x000005f40000 : "rootfs2"
[ 2.451922] 0x000005f40000-0x000005f80000 : "nvram"
[ 2.453196] 0x000005f80000-0x000008000000 : "ddwrt"
[ 2.478664] random: crng init done
[ 2.503978] libphy: GPIO Bitbanged MDIO: probed
[ 2.507412] libphy: Fixed MDIO Bus: probed
[ 2.529524] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
[ 3.393836] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 3.393864] Ring mode enabled
[ 3.397861] DMA HW capability register supported
[ 3.400892] Enhanced/Alternate descriptors
[ 3.406453] Enabled extended descriptors
[ 3.409475] RX Checksum Offload Engine supported
[ 3.413582] COE Type 2
[ 3.418263] TX Checksum insertion supported
[ 3.420596] Wake-Up On Lan supported
[ 3.425042] eth%d: device MAC address 00:06:3b:01:41:00
[ 3.428601] Enable RX Mitigation via HW Watchdog Timer
[ 3.435096] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 3.438841] Ring mode enabled
[ 3.444133] DMA HW capability register supported
[ 3.447001] Enhanced/Alternate descriptors
[ 3.452642] Enabled extended descriptors
[ 3.455601] RX Checksum Offload Engine supported
[ 3.459841] COE Type 2
[ 3.464451] TX Checksum insertion supported
[ 3.466711] Wake-Up On Lan supported
[ 3.471300] eth%d: device MAC address 00:03:7f:ba:db:02
[ 3.474786] Enable RX Mitigation via HW Watchdog Timer
[ 3.480790] i2c /dev entries driver
[ 3.485734] Calibration not found.
[ 3.489769] CPUidle arm: CPU 0 failed to init idle CPU ops
[ 3.492485] GACT probability NOT on
[ 3.497450] Mirror/redirect action on
[ 3.500943] Simple TC action Loaded
[ 3.505253] netem: version 1.3
[ 3.507973] u32 classifier
[ 3.511131] Performance counters on
[ 3.513759] input device check on
[ 3.517492] Actions configured
[ 3.521382] Netfilter messages via NETLINK v0.30.
[ 3.524995] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 3.530111] nf_conntrack_rtsp v0.7 loading
[ 3.535688] xt_time: kernel timezone is -0000
[ 3.539467] ip_set: protocol 6
[ 3.544038] gre: GRE over IPv4 demultiplexor driver
[ 3.547159] nf_nat_rtsp v0.7 loading
[ 3.551627] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.555596] NET: Registered protocol family 17
[ 3.560789] Bridge firewalling registered
[ 3.564891] 8021q: 802.1Q VLAN Support v1.8
[ 3.571252] Registering SWP/SWPB emulation handler
[ 3.573398] registered taskstats version 1
[ 3.587803] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
[ 3.606665] s1a: Bringing 0uV into 1050000-1050000uV
[ 3.606972] s1b: Bringing 0uV into 1050000-1050000uV
[ 3.611001] s2a: Bringing 0uV into 800000-800000uV
[ 3.615875] s2b: Bringing 0uV into 800000-800000uV
[ 3.625013] trying to register driver cpufreq-dt
[ 3.626753] searching for nvram
[ 3.629900] nvram size = 262144
[ 3.719748] found nvram at 20000
[ 3.765874] no valid UBI magic found inside mtd13
[ 3.765928] hctosys: unable to open rtc device (rtc0)
[ 3.775353] VFS: Mounted root (squashfs filesystem) readonly on device 31:16.
[ 3.776946] Freeing unused kernel memory: 1024K
[ 7.576324] Loading modules backported from Linux version v5.10-rc6-0-gb65054597872
[ 7.576358] Backport generated by backports.git v5.10-rc6-1-0-g3a9d70a3
[ 8.102301] ath9k: ath9k: Driver unloaded
[ 8.425491] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 8.426240] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 8.614830] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[ 8.946506] ath10k_pci 0000:01:00.0: found firmware features ie (8 B)
[ 8.946543] ath10k_pci 0000:01:00.0: Unknown FW IE: 30
[ 8.951996] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
[ 8.956969] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[ 8.969224] ath10k_pci 0000:01:00.0: firmware ver 10.4-ddwrt-9980-tW-13-6284M api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate crc32 037de748
[ 9.026558] ath10k_pci 0000:01:00.0: boot get otp board id result 0x00008800 board_id 2 chip_id 1 ext_bid_support 0
[ 9.026597] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=2'
[ 9.035880] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=2'
[ 9.061999] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:2 crc32 792a3d38
[ 9.083142] ath10k_pci 0000:01:00.0: boot already acquired valid otp board id,skip download, board_id 2 chip_id 1
[ 9.103715] ath10k_pci 0000:01:00.0: boot upload otp to 0x1234 len 9477
[ 10.158012] ath10k_pci 0000:01:00.0: Init Max Stations to 64
[ 10.230525] ath10k_pci 0000:01:00.0: wmi debug print truncated: 128
[ 10.230555] ath10k_pci 0000:01:00.0: ChipType 1200 ChipTypeID 0 BoardID 1 P 80/80 V 16 K 160 PH 272 T 282 msdu-desc: 2500 sw-crypt: 0 c
[ 10.235699] ath10k_pci 0000:01:00.0: free: 24820 iram: 34016 sram: 18196
[ 10.248170] ath10k_pci 0000:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr c0:56:27:08:b2:92 status 0
[ 10.285812] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 64 raw 0 hwcrypto 1
[ 10.393312] ath: EEPROM regdomain sanitized
[ 10.393325] ath: EEPROM regdomain: 0x64
[ 10.393333] ath: EEPROM indicates we should expect a direct regpair map
[ 10.393352] ath: Country alpha2 being used: 00
[ 10.393361] ath: Regpair used: 0x64
[ 10.393436] initialize fq_codel with 33554432 bytes memory limit
[ 10.393708] ieee80211_txq_setup_flows: set limit to 4194304 bytes
[ 10.404987] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[ 10.405678] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 10.592757] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[ 10.592828] ath10k_pci 0001:01:00.0: found firmware features ie (8 B)
[ 10.602463] ath10k_pci 0001:01:00.0: Unknown FW IE: 30
[ 10.608879] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
[ 10.614014] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[ 10.627561] ath10k_pci 0001:01:00.0: firmware ver 10.4-ddwrt-9980-tW-13-6284M api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate crc32 037de748
[ 10.683379] ath10k_pci 0001:01:00.0: boot get otp board id result 0x00008400 board_id 1 chip_id 1 ext_bid_support 0
[ 10.683434] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=1'
[ 10.692722] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=1'
[ 10.702847] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:1 crc32 792a3d38
[ 10.731602] ath10k_pci 0001:01:00.0: boot already acquired valid otp board id,skip download, board_id 1 chip_id 1
[ 10.752096] ath10k_pci 0001:01:00.0: boot upload otp to 0x1234 len 9477
[ 11.802821] ath10k_pci 0001:01:00.0: Init Max Stations to 64
[ 11.873263] ath10k_pci 0001:01:00.0: wmi debug print truncated: 128
[ 11.873302] ath10k_pci 0001:01:00.0: ChipType 1200 ChipTypeID 0 BoardID 2 P 80/80 V 16 K 160 PH 272 T 282 msdu-desc: 2500 sw-crypt: 0 c
[ 11.878512] ath10k_pci 0001:01:00.0: free: 24820 iram: 34016 sram: 18196
[ 11.890937] ath10k_pci 0001:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr c0:56:27:08:b2:92 status 0
[ 11.927710] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 64 raw 0 hwcrypto 1
[ 12.033616] ath: EEPROM regdomain sanitized
[ 12.033626] ath: EEPROM regdomain: 0x64
[ 12.033632] ath: EEPROM indicates we should expect a direct regpair map
[ 12.033646] ath: Country alpha2 being used: 00
[ 12.033652] ath: Regpair used: 0x64
[ 12.033713] initialize fq_codel with 33554432 bytes memory limit
[ 12.033878] ieee80211_txq_setup_flows: set limit to 33554432 bytes
[ 13.169600] dwmac1000: Master AXI performs any burst length
[ 13.169668] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 13.174262] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[ 13.282551] dwmac1000: Master AXI performs any burst length
[ 13.282592] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 13.287061] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 14.249107] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 15.346304] device br0 entered promiscuous mode
[ 15.429277] br0: port 1(vlan1) entered blocking state
[ 15.431770] br0: port 1(vlan1) entered disabled state
[ 15.437022] device vlan1 entered promiscuous mode
[ 15.441911] device eth0 entered promiscuous mode
[ 15.454200] br0: port 1(vlan1) entered blocking state
[ 15.454223] br0: port 1(vlan1) entered forwarding state
[ 15.459172] device br0 left promiscuous mode
[ 15.466551] device br0 entered promiscuous mode
[ 15.477766] device br0 left promiscuous mode
[ 15.530141] ath: EEPROM regdomain: 0x8348
[ 15.530147] ath: EEPROM indicates we should expect a country code
[ 15.530155] ath: doing EEPROM country->regdmn map search
[ 15.530161] ath: country maps to regdmn code: 0x3a
[ 15.530165] ath: Country alpha2 being used: US
[ 15.530170] ath: Regpair used: 0x3a
[ 15.530175] ath: regdomain 0x8348 dynamically updated by user
[ 15.530195] ath: EEPROM regdomain: 0x8348
[ 15.530198] ath: EEPROM indicates we should expect a country code
[ 15.530204] ath: doing EEPROM country->regdmn map search
[ 15.530210] ath: country maps to regdmn code: 0x3a
[ 15.530214] ath: Country alpha2 being used: US
[ 15.530217] ath: Regpair used: 0x3a
[ 15.530221] ath: regdomain 0x8348 dynamically updated by user
[ 15.769836] device vlan2 entered promiscuous mode
[ 16.931702] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 17.135974] Linux kernel CIFS/SMB SERVER 3.4.2 by Namjae Jeon <linkinjeon@kernel.org>
[ 17.251458] device vlan2 left promiscuous mode
[ 17.779890] usbcore: registered new interface driver usbfs
[ 17.780000] usbcore: registered new interface driver hub
[ 17.784320] usbcore: registered new device driver usb
[ 17.838303] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 17.880629] ehci-platform: EHCI generic platform driver
[ 17.923493] ehci-pci: EHCI PCI platform driver
[ 18.019081] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 18.404032] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 18.404118] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 18.408576] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 18.416111] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
[ 18.425437] hub 1-0:1.0: USB hub found
[ 18.431001] hub 1-0:1.0: 1 port detected
[ 18.434936] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 18.438631] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 18.444043] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 18.452029] hub 2-0:1.0: USB hub found
[ 18.459853] hub 2-0:1.0: 1 port detected
[ 18.537731] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 18.537782] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 18.542367] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 18.549769] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
[ 18.559050] hub 3-0:1.0: USB hub found
[ 18.565420] hub 3-0:1.0: 1 port detected
[ 18.568504] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 18.572357] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 18.577777] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 18.585730] hub 4-0:1.0: USB hub found
[ 18.593780] hub 4-0:1.0: 1 port detected
[ 18.839089] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 18.999066] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 19.939147] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 23.635127] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 23.635166] usb usb4: USB disconnect, device number 1
[ 23.640715] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered
[ 23.644714] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 23.650045] usb usb3: USB disconnect, device number 1
[ 23.650052] usb 3-1: USB disconnect, device number 2
[ 23.660356] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered
[ 23.660833] xhci-hcd xhci-hcd.0.auto: remove, state 1
[ 23.660851] usb usb2: USB disconnect, device number 1
[ 23.660863] usb 2-1: USB disconnect, device number 2
[ 23.663776] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
[ 23.664210] xhci-hcd xhci-hcd.0.auto: remove, state 1
[ 23.664232] usb usb1: USB disconnect, device number 1
[ 23.665678] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
[ 23.720161] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 23.720249] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 23.724754] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 23.732192] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
[ 23.742104] hub 1-0:1.0: USB hub found
[ 23.747692] hub 1-0:1.0: 1 port detected
[ 23.753450] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 23.754732] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 23.761496] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 23.768597] hub 2-0:1.0: USB hub found
[ 23.779809] hub 2-0:1.0: 1 port detected
[ 23.780379] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 23.783514] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 23.788930] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 23.796435] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
[ 23.806743] hub 3-0:1.0: USB hub found
[ 23.813657] hub 3-0:1.0: 1 port detected
[ 23.822039] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 23.822093] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 23.831346] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 23.836048] hub 4-0:1.0: USB hub found
[ 23.847788] hub 4-0:1.0: 1 port detected
[ 23.899220] SCSI subsystem initialized
[ 24.035676] usbcore: registered new interface driver usb-storage
[ 24.099121] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 24.121420] libata version 3.00 loaded.
[ 24.183333] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 24.207368] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
[ 24.208220] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 24.209242] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 24.219285] usb-storage 2-1:1.0: Quirks match for vid 090c pid 1000: 400
[ 24.219368] scsi host0: usb-storage 2-1:1.0
[ 24.235071] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
[ 24.236592] scsi host1: ahci
[ 24.236808] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 95
[ 24.272338] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 24.277467] scsi host2: usb-storage 3-1:1.0
[ 24.570496] ata1: SATA link down (SStatus 0 SControl 300)
[ 24.734138] sdhci: Secure Digital Host Controller Interface driver
[ 24.734165] sdhci: Copyright(c) Pierre Ossman
[ 24.747355] sdhci-pltfm: SDHCI platform and OF driver helper
[ 25.290026] scsi 2:0:0:0: Direct-Access USB Flash Drive 1.00 PQ: 0 ANSI: 6
[ 25.475284] scsi 0:0:0:0: Direct-Access Samsung Flash Drive 1100 PQ: 0 ANSI: 6
[ 25.477529] sd 0:0:0:0: [sda] 62656641 512-byte logical blocks: (32.1 GB/29.9 GiB)
[ 25.482528] sd 2:0:0:0: [sdb] 30629376 512-byte logical blocks: (15.7 GB/14.6 GiB)
[ 25.489994] sd 0:0:0:0: [sda] Write Protect is off
[ 25.491017] sd 2:0:0:0: [sdb] Write Protect is off
[ 25.491025] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 25.491304] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 25.497168] sdb: sdb1
[ 25.499943] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 25.518383] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 25.518738] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 25.601130] ksmbd: kill command received
[ 25.745425] sda: sda1
[ 25.747588] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 26.501263] EXT4-fs (sda1): Ignoring removed nobh option
[ 26.503338] EXT4-fs (sda1): barriers disabled
[ 26.509338] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: init_itable=0,nobarrier,nobh,barrier=0
[ 26.514045] EXT4-fs (sdb1): Ignoring removed nobh option
[ 26.523223] EXT4-fs (sdb1): barriers disabled
[ 26.544246] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: init_itable=0,nobarrier,nobh,barrier=0
[ 27.166292] Linux kernel CIFS/SMB SERVER 3.4.2 by Namjae Jeon <linkinjeon@kernel.org>
[ 221.380823] ksmbd: cannot get linux path (/mnt/sdb1/tmpJunk/CBM-links.txt), err = -22
[ 306.154742] ksmbd: cannot get linux path (/mnt/sdb1/tmpJunk/samba encryption.txt), err = -22
root@DD-WRT:~# cat /tmp/var/log/messages
Dec 31 18:00:14 DD-WRT syslog.info syslogd started: BusyBox v1.34.1
Dec 31 18:00:14 DD-WRT user.info : [klogd] : daemon successfully started
Dec 31 18:00:14 DD-WRT kern.notice kernel: klogd started: BusyBox v1.34.1 (2021-10-20 02:37:28 +07)
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.000000] Booting Linux on physical CPU 0x0
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 0.000000] Linux (LTO) version 4.9.287 (root@server2) (gcc version 10.0.1 (OpenWrt GCC 10.0.1 r12423-0493d57e04) ) #518 SMP Tue Oct 19 16:09:00 +07 2021
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.000000] CPU: div instructions available: patching division code
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.000000] OF: fdt:Machine model: Linksys EA8500 WiFi Router
Dec 31 18:00:14 DD-WRT kern.warn kernel: [ 0.000000] OF: fdt:Ignoring memory range 0x41500000 - 0x42000000
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.000000] Memory policy: Data cache writealloc
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 0.000000] On node 0 totalpages: 122880
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat c0a2eb40, node_mem_map ddc39000
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 0.000000] Normal zone: 960 pages used for memmap
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 0.000000] Normal zone: 122880 pages, LIFO batch:31
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.000000] percpu: Embedded 12 pages/cpu s18956 r8192 d22004 u49152
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 0.000000] pcpu-alloc: s18956 r8192 d22004 u49152 alloc=12*4096
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:16
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.000000] Memory: 479264K/491520K available (5120K kernel code, 190K rwdata, 736K rodata, 1024K init, 395K bss, 12256K reserved, 0K cma-reserved, 0K highmem)
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 0.000000] Virtual kernel memory layout:
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 0.000000] vmalloc : 0xde800000 - 0xff800000 ( 528 MB)
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB)
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 0.000000] .text : 0xc0208000 - 0xc0800000 (6112 kB)
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 0.000000] .init : 0xc0900000 - 0xc0a00000 (1024 kB)
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 0.000000] .data : 0xc0a00000 - 0xc0a2f818 ( 191 kB)
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 0.000000] .bss : 0xc0a31000 - 0xc0a93ff1 ( 396 kB)
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.000000] Hierarchical RCU implementation.
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.000000] NR_IRQS:16 nr_irqs:16 16
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.000008] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.000023] Switching to timer-based delay loop, resolution 160ns
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.000243] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.000268] pid_max: default: 32768 minimum: 301
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.000389] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.000405] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.001053] CPU: Testing write buffer coherency: ok
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.001372] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.001424] Setting up static identity map for 0x42300000 - 0x4230003c
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.004628] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.004829] Brought up 2 CPUs
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.004851] SMP: Total of 2 processors activated (25.00 BogoMIPS).
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.004864] CPU: All CPU(s) started in SVC mode.
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.018618] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.018648] futex hash table entries: 512 (order: 3, 32768 bytes)
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.018723] pinctrl core: initialized pinctrl subsystem
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.019926] NET: Registered protocol family 16
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.019985] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.020339] DMA: preallocated 256 KiB pool for atomic coherent allocations
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.051774] cpuidle: using governor ladder
Dec 31 18:00:14 DD-WRT kern.err kernel: [ 0.104850] msm_bus_fabric_init_driver
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.106215] pps_core: LinuxPPS API ver. 1 registered
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.106231] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.106277] PTP clock support registered
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.108702] clocksource: Switched to clocksource dg_timer
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.113173] NET: Registered protocol family 2
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.113353] IP idents hash table entries: 8192 (order: 4, 65536 bytes)
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.114313] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.114353] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.114409] TCP: Hash tables configured (established 4096 bind 4096)
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.114474] UDP hash table entries: 256 (order: 1, 8192 bytes)
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.114501] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.114696] NET: Registered protocol family 1
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 0.114753] PCI: CLS 0 bytes, default 64
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.116185] workingset: timestamp_bits=30 max_order=17 bucket_order=0
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.126220] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.132445] cryptodev: driver 1.9 loaded.
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.132484] io scheduler noop registered
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.132500] io scheduler deadline registered (default)
Dec 31 18:00:14 DD-WRT kern.warn kernel: [ 0.134391] 1b500000.pci supply vdda not found, using dummy regulator
Dec 31 18:00:14 DD-WRT kern.warn kernel: [ 0.134502] 1b500000.pci supply vdda_phy not found, using dummy regulator
Dec 31 18:00:14 DD-WRT kern.warn kernel: [ 0.134593] 1b500000.pci supply vdda_refclk not found, using dummy regulator
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.135669] OF: PCI: host bridge /soc/pci@1b500000 ranges:
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.135716] OF: PCI: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.135745] OF: PCI: MEM 0x08000000..0x0fdfffff -> 0x08000000
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.239081] qcom-pcie 1b500000.pci: link up
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.239272] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.239296] pci_bus 0000:00: root bus resource [bus 00-ff]
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.239316] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.239333] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 0.239388] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 0.239554] pci 0000:00:00.0: supports D1
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 0.239565] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.239885] PCI: bus0: Fast back to back transfers disabled
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 0.240220] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 0.240474] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 0.241648] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.242243] PCI: bus1: Fast back to back transfers disabled
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.242562] pci 0000:00:00.0: BAR 14: assigned [mem 0x08000000-0x081fffff]
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.242590] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.242728] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.242754] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 0.243193] aer 0000:00:00.0:pcie002: service driver aer loaded
Dec 31 18:00:14 DD-WRT kern.warn kernel: [ 0.243696] 1b700000.pci supply vdda not found, using dummy regulator
Dec 31 18:00:14 DD-WRT kern.warn kernel: [ 0.243815] 1b700000.pci supply vdda_phy not found, using dummy regulator
Dec 31 18:00:14 DD-WRT kern.warn kernel: [ 0.243920] 1b700000.pci supply vdda_refclk not found, using dummy regulator
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.244957] OF: PCI: host bridge /soc/pci@1b700000 ranges:
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.244999] OF: PCI: IO 0x31e00000..0x31efffff -> 0x31e00000
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.245025] OF: PCI: MEM 0x2e000000..0x31dfffff -> 0x2e000000
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.349073] qcom-pcie 1b700000.pci: link up
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.349262] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.349284] pci_bus 0001:00: root bus resource [bus 00-ff]
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.349300] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 0.349349] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 0.349485] pci 0001:00:00.0: supports D1
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 0.349498] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.349778] PCI: bus0: Fast back to back transfers disabled
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 0.350092] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 0.350323] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 0.351409] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.351984] PCI: bus1: Fast back to back transfers disabled
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.352405] pci 0001:00:00.0: BAR 14: assigned [mem 0x2e000000-0x2e1fffff]
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.352431] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.352556] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.352577] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 0.352978] aer 0001:00:00.0:pcie002: service driver aer loaded
Dec 31 18:00:14 DD-WRT kern.warn kernel: [ 0.353468] 1b900000.pci supply vdda not found, using dummy regulator
Dec 31 18:00:14 DD-WRT kern.warn kernel: [ 0.353576] 1b900000.pci supply vdda_phy not found, using dummy regulator
Dec 31 18:00:14 DD-WRT kern.warn kernel: [ 0.353666] 1b900000.pci supply vdda_refclk not found, using dummy regulator
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.354723] OF: PCI: host bridge /soc/pci@1b900000 ranges:
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.354762] OF: PCI: IO 0x35e00000..0x35efffff -> 0x35e00000
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 0.354788] OF: PCI: MEM 0x32000000..0x35dfffff -> 0x32000000
Dec 31 18:00:14 DD-WRT kern.err kernel: [ 1.359096] qcom-pcie 1b900000.pci: phy link never came up
Dec 31 18:00:14 DD-WRT kern.err kernel: [ 1.360940] qcom-pcie 1b900000.pci: hostinit failed
Dec 31 18:00:14 DD-WRT kern.warn kernel: [ 1.361754] deviceless supply s1b not found, using dummy regulator
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 1.363488] L2 @ QSB rate. Forcing new rate.
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 1.363659] L2 @ 800000 KHz
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 1.363772] CPU0 @ 800000 KHz
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 1.363783] CPU1 @ QSB rate. Forcing new rate.
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 1.363910] CPU1 @ 800000 KHz
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 1.366298] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 1.368100] serial8250_init
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 1.368115] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 1.369356] msm_serial 16340000.serial: msm_serial: detected port #0
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 1.369462] msm_serial 16340000.serial: uartclk = 7372800
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 1.369544] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 201, base_baud = 460800) is a MSM
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 1.369580] msm_serial: console setup on port #0
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 2.116905] console [ttyMSM0] enabled
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 2.121665] msm_serial: driver initialized
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 2.127053] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 2.129045] nand: AMD/Spansion S34MS01G2
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 2.135479] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 2.139908] 19 ofpart partitions found on MTD device qcom_nand.0
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 2.146765] Creating 19 MTD partitions on "qcom_nand.0":
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 2.153019] 0x000000000000-0x000000040000 : "SBL1"
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 2.159580] 0x000000040000-0x000000180000 : "MIBIB"
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 2.165471] 0x000000180000-0x0000002c0000 : "SBL2"
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 2.170506] 0x0000002c0000-0x000000540000 : "SBL3"
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 2.173083] random: fast init done
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 2.180969] 0x000000540000-0x000000660000 : "DDRCONFIG"
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 2.183519] 0x000000660000-0x000000780000 : "SSD"
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 2.188178] 0x000000780000-0x000000a00000 : "TZ"
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 2.195320] 0x000000a00000-0x000000c80000 : "RPM"
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 2.200106] 0x000000c80000-0x000000dc0000 : "art"
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 2.202865] 0x000000dc0000-0x000000ec0000 : "APPSBL"
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 2.206908] 0x000000ec0000-0x000000f00000 : "u_env"
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 2.210925] 0x000000f00000-0x000000f40000 : "s_env"
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 2.215434] 0x000000f40000-0x000000f80000 : "devinfo"
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 2.220336] 0x000000f80000-0x000003780000 : "linux"
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 2.282156] 0x000001280000-0x000003780000 : "rootfs"
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 2.335041] mtd: partition "rootfs" set to be root filesystem
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 2.335074] 0x000003780000-0x000005f40000 : "linux2"
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 2.398570] 0x000003a80000-0x000005f40000 : "rootfs2"
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 2.451922] 0x000005f40000-0x000005f80000 : "nvram"
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 2.453196] 0x000005f80000-0x000008000000 : "ddwrt"
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 2.478664] random: crng init done
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 2.503978] libphy: GPIO Bitbanged MDIO: probed
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 2.507412] libphy: Fixed MDIO Bus: probed
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 2.529524] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.393836] stmmac - user ID: 0x10, Synopsys ID: 0x37
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.393864] Ring mode enabled
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.397861] DMA HW capability register supported
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.400892] Enhanced/Alternate descriptors
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.406453] Enabled extended descriptors
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.409475] RX Checksum Offload Engine supported
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.413582] COE Type 2
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.418263] TX Checksum insertion supported
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.420596] Wake-Up On Lan supported
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.425042] eth%d: device MAC address 00:06:3b:01:41:00
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.428601] Enable RX Mitigation via HW Watchdog Timer
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.435096] stmmac - user ID: 0x10, Synopsys ID: 0x37
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.438841] Ring mode enabled
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.444133] DMA HW capability register supported
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.447001] Enhanced/Alternate descriptors
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.452642] Enabled extended descriptors
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.455601] RX Checksum Offload Engine supported
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.459841] COE Type 2
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.464451] TX Checksum insertion supported
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.466711] Wake-Up On Lan supported
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.471300] eth%d: device MAC address 00:03:7f:ba:db:02
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.474786] Enable RX Mitigation via HW Watchdog Timer
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.480790] i2c /dev entries driver
Dec 31 18:00:14 DD-WRT kern.err kernel: [ 3.485734] Calibration not found.
Dec 31 18:00:14 DD-WRT kern.err kernel: [ 3.489769] CPUidle arm: CPU 0 failed to init idle CPU ops
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.492485] GACT probability NOT on
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.497450] Mirror/redirect action on
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.500943] Simple TC action Loaded
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.505253] netem: version 1.3
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.507973] u32 classifier
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.511131] Performance counters on
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.513759] input device check on
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.517492] Actions configured
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.521382] Netfilter messages via NETLINK v0.30.
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.524995] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
Dec 31 18:00:14 DD-WRT kern.warn kernel: [ 3.530111] nf_conntrack_rtsp v0.7 loading
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.535688] xt_time: kernel timezone is -0000
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.539467] ip_set: protocol 6
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.544038] gre: GRE over IPv4 demultiplexor driver
Dec 31 18:00:14 DD-WRT kern.warn kernel: [ 3.547159] nf_nat_rtsp v0.7 loading
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.551627] ip_tables: (C) 2000-2006 Netfilter Core Team
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.555596] NET: Registered protocol family 17
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 3.560789] Bridge firewalling registered
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.564891] 8021q: 802.1Q VLAN Support v1.8
Dec 31 18:00:14 DD-WRT kern.notice kernel: [ 3.571252] Registering SWP/SWPB emulation handler
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.573398] registered taskstats version 1
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.587803] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.606665] s1a: Bringing 0uV into 1050000-1050000uV
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.606972] s1b: Bringing 0uV into 1050000-1050000uV
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.611001] s2a: Bringing 0uV into 800000-800000uV
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.615875] s2b: Bringing 0uV into 800000-800000uV
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.625013] trying to register driver cpufreq-dt
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.626753] searching for nvram
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.629900] nvram size = 262144
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.719748] found nvram at 20000
Dec 31 18:00:14 DD-WRT kern.err kernel: [ 3.765874] no valid UBI magic found inside mtd13
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.765928] hctosys: unable to open rtc device (rtc0)
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.775353] VFS: Mounted root (squashfs filesystem) readonly on device 31:16.
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 3.776946] Freeing unused kernel memory: 1024K
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 7.576324] Loading modules backported from Linux version v5.10-rc6-0-gb65054597872
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 7.576358] Backport generated by backports.git v5.10-rc6-1-0-g3a9d70a3
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 8.102301] ath9k: ath9k: Driver unloaded
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 8.425491] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 8.426240] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Dec 31 18:00:14 DD-WRT kern.warn kernel: [ 8.614830] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 8.946506] ath10k_pci 0000:01:00.0: found firmware features ie (8 B)
Dec 31 18:00:14 DD-WRT kern.warn kernel: [ 8.946543] ath10k_pci 0000:01:00.0: Unknown FW IE: 30
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 8.951996] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 8.956969] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 8.969224] ath10k_pci 0000:01:00.0: firmware ver 10.4-ddwrt-9980-tW-13-6284M api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate crc32 037de748
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 9.026558] ath10k_pci 0000:01:00.0: boot get otp board id result 0x00008800 board_id 2 chip_id 1 ext_bid_support 0
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 9.026597] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=2'
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 9.035880] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=2'
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 9.061999] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:2 crc32 792a3d38
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 9.083142] ath10k_pci 0000:01:00.0: boot already acquired valid otp board id,skip download, board_id 2 chip_id 1
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 9.103715] ath10k_pci 0000:01:00.0: boot upload otp to 0x1234 len 9477
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 10.158012] ath10k_pci 0000:01:00.0: Init Max Stations to 64
Dec 31 18:00:14 DD-WRT kern.warn kernel: [ 10.230525] ath10k_pci 0000:01:00.0: wmi debug print truncated: 128
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 10.230555] ath10k_pci 0000:01:00.0: ChipType 1200 ChipTypeID 0 BoardID 1 P 80/80 V 16 K 160 PH 272 T 282 msdu-desc: 2500 sw-crypt: 0 c
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 10.235699] ath10k_pci 0000:01:00.0: free: 24820 iram: 34016 sram: 18196
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 10.248170] ath10k_pci 0000:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr c0:56:27:08:b2:92 status 0
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 10.285812] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 64 raw 0 hwcrypto 1
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 10.393312] ath: EEPROM regdomain sanitized
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 10.393325] ath: EEPROM regdomain: 0x64
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 10.393333] ath: EEPROM indicates we should expect a direct regpair map
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 10.393352] ath: Country alpha2 being used: 00
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 10.393361] ath: Regpair used: 0x64
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 10.393436] initialize fq_codel with 33554432 bytes memory limit
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 10.393708] ieee80211_txq_setup_flows: set limit to 4194304 bytes
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 10.404987] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 10.405678] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Dec 31 18:00:14 DD-WRT kern.warn kernel: [ 10.592757] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 10.592828] ath10k_pci 0001:01:00.0: found firmware features ie (8 B)
Dec 31 18:00:14 DD-WRT kern.warn kernel: [ 10.602463] ath10k_pci 0001:01:00.0: Unknown FW IE: 30
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 10.608879] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 10.614014] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 10.627561] ath10k_pci 0001:01:00.0: firmware ver 10.4-ddwrt-9980-tW-13-6284M api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate crc32 037de748
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 10.683379] ath10k_pci 0001:01:00.0: boot get otp board id result 0x00008400 board_id 1 chip_id 1 ext_bid_support 0
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 10.683434] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=1'
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 10.692722] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=1'
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 10.702847] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:1 crc32 792a3d38
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 10.731602] ath10k_pci 0001:01:00.0: boot already acquired valid otp board id,skip download, board_id 1 chip_id 1
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 10.752096] ath10k_pci 0001:01:00.0: boot upload otp to 0x1234 len 9477
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 11.802821] ath10k_pci 0001:01:00.0: Init Max Stations to 64
Dec 31 18:00:14 DD-WRT kern.warn kernel: [ 11.873263] ath10k_pci 0001:01:00.0: wmi debug print truncated: 128
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 11.873302] ath10k_pci 0001:01:00.0: ChipType 1200 ChipTypeID 0 BoardID 2 P 80/80 V 16 K 160 PH 272 T 282 msdu-desc: 2500 sw-crypt: 0 c
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 11.878512] ath10k_pci 0001:01:00.0: free: 24820 iram: 34016 sram: 18196
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 11.890937] ath10k_pci 0001:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr c0:56:27:08:b2:92 status 0
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 11.927710] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 64 raw 0 hwcrypto 1
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 12.033616] ath: EEPROM regdomain sanitized
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 12.033626] ath: EEPROM regdomain: 0x64
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 12.033632] ath: EEPROM indicates we should expect a direct regpair map
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 12.033646] ath: Country alpha2 being used: 00
Dec 31 18:00:14 DD-WRT kern.debug kernel: [ 12.033652] ath: Regpair used: 0x64
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 12.033713] initialize fq_codel with 33554432 bytes memory limit
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 12.033878] ieee80211_txq_setup_flows: set limit to 33554432 bytes
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 13.169600] dwmac1000: Master AXI performs any burst length
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 13.169668] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 13.174262] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 13.282551] dwmac1000: Master AXI performs any burst length
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 13.282592] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 13.287061] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
Dec 31 18:00:14 DD-WRT kern.info kernel: [ 14.249107] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
Dec 31 18:00:14 DD-WRT daemon.info smartd[888]: smartd 7.2 2020-12-30 r5155 [armv7l-linux-4.9.287] (local build)
Dec 31 18:00:14 DD-WRT daemon.info smartd[888]: Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
Dec 31 18:00:14 DD-WRT daemon.info smartd[888]: Opened configuration file /usr/etc/smartd.conf
Dec 31 18:00:14 DD-WRT daemon.info smartd[888]: Drive: DEVICESCAN, implied '-a' Directive on line 32 of file /usr/etc/smartd.conf
Dec 31 18:00:14 DD-WRT daemon.info smartd[888]: Configuration file /usr/etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Dec 31 18:00:14 DD-WRT daemon.crit smartd[888]: In the system's table of devices NO devices found to scan
Dec 31 18:00:14 DD-WRT daemon.info smartd[888]: Unable to monitor any SMART enabled devices. Try debug (-d) option. Exiting...
Dec 31 18:00:14 DD-WRT user.info : [resetbutton] : resetbutton daemon successfully started
Dec 31 18:00:14 DD-WRT user.info : [bridge] : interface wlan0 successfully deleted from bridge br0
Dec 31 18:00:15 DD-WRT user.info : [bridge] : interface wlan1 successfully deleted from bridge br0
Dec 31 18:00:15 DD-WRT user.info : [bridge] : bridge br0 successfully added
Dec 31 18:00:15 DD-WRT kern.info kernel: [ 15.346304] device br0 entered promiscuous mode
Dec 31 18:00:15 DD-WRT daemon.info mstpd[764]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
Dec 31 18:00:15 DD-WRT daemon.info mstpd[764]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
Dec 31 18:00:15 DD-WRT user.info : [bridge] : interface vlan1 successfully added to bridge br0
Dec 31 18:00:15 DD-WRT kern.info kernel: [ 15.429277] br0: port 1(vlan1) entered blocking state
Dec 31 18:00:15 DD-WRT kern.info kernel: [ 15.431770] br0: port 1(vlan1) entered disabled state
Dec 31 18:00:15 DD-WRT kern.info kernel: [ 15.437022] device vlan1 entered promiscuous mode
Dec 31 18:00:15 DD-WRT kern.info kernel: [ 15.441911] device eth0 entered promiscuous mode
Dec 31 18:00:15 DD-WRT kern.info kernel: [ 15.454200] br0: port 1(vlan1) entered blocking state
Dec 31 18:00:15 DD-WRT kern.info kernel: [ 15.454223] br0: port 1(vlan1) entered forwarding state
Dec 31 18:00:15 DD-WRT kern.info kernel: [ 15.459172] device br0 left promiscuous mode
Dec 31 18:00:15 DD-WRT kern.info kernel: [ 15.466551] device br0 entered promiscuous mode
Dec 31 18:00:15 DD-WRT kern.info kernel: [ 15.477766] device br0 left promiscuous mode
Dec 31 18:00:15 DD-WRT kern.debug kernel: [ 15.530141] ath: EEPROM regdomain: 0x8348
Dec 31 18:00:15 DD-WRT kern.debug kernel: [ 15.530147] ath: EEPROM indicates we should expect a country code
Dec 31 18:00:15 DD-WRT kern.debug kernel: [ 15.530155] ath: doing EEPROM country->regdmn map search
Dec 31 18:00:15 DD-WRT kern.debug kernel: [ 15.530161] ath: country maps to regdmn code: 0x3a
Dec 31 18:00:15 DD-WRT kern.debug kernel: [ 15.530165] ath: Country alpha2 being used: US
Dec 31 18:00:15 DD-WRT kern.debug kernel: [ 15.530170] ath: Regpair used: 0x3a
Dec 31 18:00:15 DD-WRT kern.debug kernel: [ 15.530175] ath: regdomain 0x8348 dynamically updated by user
Dec 31 18:00:15 DD-WRT kern.debug kernel: [ 15.530195] ath: EEPROM regdomain: 0x8348
Dec 31 18:00:15 DD-WRT kern.debug kernel: [ 15.530198] ath: EEPROM indicates we should expect a country code
Dec 31 18:00:15 DD-WRT kern.debug kernel: [ 15.530204] ath: doing EEPROM country->regdmn map search
Dec 31 18:00:15 DD-WRT kern.debug kernel: [ 15.530210] ath: country maps to regdmn code: 0x3a
Dec 31 18:00:15 DD-WRT kern.debug kernel: [ 15.530214] ath: Country alpha2 being used: US
Dec 31 18:00:15 DD-WRT kern.debug kernel: [ 15.530217] ath: Regpair used: 0x3a
Dec 31 18:00:15 DD-WRT kern.debug kernel: [ 15.530221] ath: regdomain 0x8348 dynamically updated by user
Dec 31 18:00:15 DD-WRT user.info : [klogd] : kernel log daemon successfully stopped
Dec 31 18:00:15 DD-WRT user.info : [hwmon] : successfully started
Dec 31 18:00:15 DD-WRT kern.info kernel: [ 15.769836] device vlan2 entered promiscuous mode
Dec 31 18:00:15 DD-WRT kern.notice kernel: klogd: exiting
Dec 31 18:00:15 DD-WRT user.info : [telnetd] : daemon successfully started
Dec 31 18:00:15 DD-WRT daemon.info smartd[1056]: smartd 7.2 2020-12-30 r5155 [armv7l-linux-4.9.287] (local build)
Dec 31 18:00:15 DD-WRT daemon.info smartd[1056]: Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
Dec 31 18:00:15 DD-WRT daemon.info smartd[1056]: Opened configuration file /usr/etc/smartd.conf
Dec 31 18:00:15 DD-WRT daemon.info smartd[1056]: Drive: DEVICESCAN, implied '-a' Directive on line 32 of file /usr/etc/smartd.conf
Dec 31 18:00:15 DD-WRT daemon.info smartd[1056]: Configuration file /usr/etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Dec 31 18:00:15 DD-WRT daemon.crit smartd[1056]: In the system's table of devices NO devices found to scan
Dec 31 18:00:15 DD-WRT daemon.info smartd[1056]: Unable to monitor any SMART enabled devices. Try debug (-d) option. Exiting...
Dec 31 18:00:15 DD-WRT user.info : [syslogd] : syslog daemon successfully stopped
Dec 31 18:00:15 DD-WRT syslog.info syslogd exiting
Dec 31 18:00:16 DD-WRT syslog.info syslogd started: BusyBox v1.34.1
Dec 31 18:00:16 DD-WRT user.info : [cron] : daemon successfully started
Dec 31 18:00:16 DD-WRT cron.info cron[1087]: (CRON) STARTUP (fork ok)
Dec 31 18:00:16 DD-WRT user.info : [wland] : daemon successfully started
Dec 31 18:00:16 DD-WRT daemon.info dnsmasq[1106]: started, version 2.86 cachesize 1500
Dec 31 18:00:16 DD-WRT daemon.info dnsmasq[1106]: compile time options: IPv6 GNU-getopt no-DBus no-UBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP no-conntrack ipset no-auth cryptohash DNSSEC loop-detect no-inotify no-dumpfile
Dec 31 18:00:16 DD-WRT daemon.info dnsmasq-dhcp[1106]: DHCP, IP range 192.168.1.100 -- 192.168.1.149, lease time 1d
Dec 31 18:00:16 DD-WRT user.info : [dnsmasq] : daemon successfully started
Dec 31 18:00:16 DD-WRT daemon.info dnsmasq[1106]: using only locally-known addresses for test
Dec 31 18:00:16 DD-WRT daemon.info dnsmasq[1106]: using only locally-known addresses for onion
Dec 31 18:00:16 DD-WRT daemon.info dnsmasq[1106]: using only locally-known addresses for localhost
Dec 31 18:00:16 DD-WRT daemon.info dnsmasq[1106]: using only locally-known addresses for local
Dec 31 18:00:16 DD-WRT daemon.info dnsmasq[1106]: using only locally-known addresses for invalid
Dec 31 18:00:16 DD-WRT daemon.info dnsmasq[1106]: using only locally-known addresses for bind
Dec 31 18:00:16 DD-WRT daemon.warn dnsmasq[1106]: no servers found in /tmp/resolv.dnsmasq, will retry
Dec 31 18:00:16 DD-WRT daemon.info dnsmasq[1106]: read /etc/hosts - 2 addresses
Dec 31 18:00:16 DD-WRT kern.info kernel: [ 16.931702] ip6_tables: (C) 2000-2006 Netfilter Core Team
Dec 31 18:00:17 DD-WRT kern.info kernel: [ 17.135974] Linux kernel CIFS/SMB SERVER 3.4.2 by Namjae Jeon <linkinjeon@kernel.org>
Dec 31 18:00:17 DD-WRT user.info wsdd2[1290]: starting.
Dec 31 18:00:17 DD-WRT user.info : [smbd] : samba started
Dec 31 18:00:17 DD-WRT local5.err ksmbd: [ksmbd-manager/1293]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory
Dec 31 18:00:17 DD-WRT local5.info ksmbd: [ksmbd-worker/1294]: INFO: User already exists nobody
Dec 31 18:00:17 DD-WRT user.err wsdd2[1290]: error: wsdd-mcast-v4: wsd_send_soap_msg: send: Network unreachable
Dec 31 18:00:17 DD-WRT kern.info kernel: [ 17.251458] device vlan2 left promiscuous mode
Dec 31 18:00:17 DD-WRT user.info : [httpd] : daemon successfully stopped
Dec 31 18:00:17 DD-WRT user.info : [httpd] : http daemon successfully started
Dec 31 18:00:17 DD-WRT user.info : [resetbutton] : daemon successfully stopped
Dec 31 18:00:17 DD-WRT user.info : [resetbutton] : resetbutton daemon successfully started
Dec 31 18:00:17 DD-WRT kern.info kernel: [ 17.779890] usbcore: registered new interface driver usbfs
Dec 31 18:00:17 DD-WRT kern.info kernel: [ 17.780000] usbcore: registered new interface driver hub
Dec 31 18:00:17 DD-WRT kern.info kernel: [ 17.784320] usbcore: registered new device driver usb
Dec 31 18:00:17 DD-WRT kern.info kernel: [ 17.838303] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Dec 31 18:00:17 DD-WRT kern.info kernel: [ 17.880629] ehci-platform: EHCI generic platform driver
Dec 31 18:00:17 DD-WRT kern.info kernel: [ 17.923493] ehci-pci: EHCI PCI platform driver
Dec 31 18:00:18 DD-WRT kern.info kernel: [ 18.019081] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Dec 31 18:00:18 DD-WRT daemon.info httpd[1334]: [httpd] : httpd server started at port 80
Dec 31 18:00:18 DD-WRT user.info : [httpd] : http daemon successfully started
Dec 31 18:00:18 DD-WRT kern.info kernel: [ 18.404032] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Dec 31 18:00:18 DD-WRT kern.info kernel: [ 18.404118] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
Dec 31 18:00:18 DD-WRT kern.info kernel: [ 18.408576] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Dec 31 18:00:18 DD-WRT kern.info kernel: [ 18.416111] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
Dec 31 18:00:18 DD-WRT kern.info kernel: [ 18.425437] hub 1-0:1.0: USB hub found
Dec 31 18:00:18 DD-WRT kern.info kernel: [ 18.431001] hub 1-0:1.0: 1 port detected
Dec 31 18:00:18 DD-WRT kern.info kernel: [ 18.434936] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Dec 31 18:00:18 DD-WRT kern.info kernel: [ 18.438631] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
Dec 31 18:00:18 DD-WRT kern.info kernel: [ 18.444043] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Dec 31 18:00:18 DD-WRT kern.info kernel: [ 18.452029] hub 2-0:1.0: USB hub found
Dec 31 18:00:18 DD-WRT kern.info kernel: [ 18.459853] hub 2-0:1.0: 1 port detected
Dec 31 18:00:18 DD-WRT kern.info kernel: [ 18.537731] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Dec 31 18:00:18 DD-WRT kern.info kernel: [ 18.537782] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
Dec 31 18:00:18 DD-WRT kern.info kernel: [ 18.542367] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Dec 31 18:00:18 DD-WRT kern.info kernel: [ 18.549769] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
Dec 31 18:00:18 DD-WRT kern.info kernel: [ 18.559050] hub 3-0:1.0: USB hub found
Dec 31 18:00:18 DD-WRT kern.info kernel: [ 18.565420] hub 3-0:1.0: 1 port detected
Dec 31 18:00:18 DD-WRT kern.info kernel: [ 18.568504] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Dec 31 18:00:18 DD-WRT kern.info kernel: [ 18.572357] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
Dec 31 18:00:18 DD-WRT kern.info kernel: [ 18.577777] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
Dec 31 18:00:18 DD-WRT kern.info kernel: [ 18.585730] hub 4-0:1.0: USB hub found
Dec 31 18:00:18 DD-WRT kern.info kernel: [ 18.593780] hub 4-0:1.0: 1 port detected
Dec 31 18:00:18 DD-WRT kern.info kernel: [ 18.839089] usb 3-1: new high-speed USB device number 2 using xhci-hcd
Dec 31 18:00:19 DD-WRT kern.info kernel: [ 18.999066] usb 1-1: new high-speed USB device number 2 using xhci-hcd
Dec 31 18:00:19 DD-WRT kern.info kernel: [ 19.939147] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
Dec 31 18:00:21 DD-WRT user.err wsdd2[1290]: error: wsdd-mcast-v4: wsd_send_soap_msg: send: Network unreachable
Dec 31 18:00:21 DD-WRT user.err wsdd2[1290]: error: wsdd-mcast-v4: wsd_send_soap_msg: send: Network unreachable
Dec 31 18:00:21 DD-WRT user.info : [wland] : daemon successfully stopped
Dec 31 18:00:21 DD-WRT user.info : [wland] : daemon successfully started
Dec 31 18:00:21 DD-WRT user.info : [wan] : WAN is up. IP: 10.72.28.160
Dec 31 18:00:21 DD-WRT user.info : [dnsmasq] : daemon successfully stopped
Dec 31 18:00:21 DD-WRT daemon.info dnsmasq[1106]: exiting on receipt of SIGTERM
Dec 31 18:00:21 DD-WRT daemon.info dnsmasq[1540]: started, version 2.86 cachesize 1500
Dec 31 18:00:21 DD-WRT daemon.info dnsmasq[1540]: compile time options: IPv6 GNU-getopt no-DBus no-UBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP no-conntrack ipset no-auth cryptohash DNSSEC loop-detect no-inotify no-dumpfile
Dec 31 18:00:21 DD-WRT daemon.info dnsmasq-dhcp[1540]: DHCP, IP range 192.168.1.100 -- 192.168.1.149, lease time 1d
Dec 31 18:00:21 DD-WRT daemon.info dnsmasq[1540]: using only locally-known addresses for test
Dec 31 18:00:21 DD-WRT daemon.info dnsmasq[1540]: using only locally-known addresses for onion
Dec 31 18:00:21 DD-WRT daemon.info dnsmasq[1540]: using only locally-known addresses for localhost
Dec 31 18:00:21 DD-WRT daemon.info dnsmasq[1540]: using only locally-known addresses for local
Dec 31 18:00:21 DD-WRT daemon.info dnsmasq[1540]: using only locally-known addresses for invalid
Dec 31 18:00:21 DD-WRT daemon.info dnsmasq[1540]: using only locally-known addresses for bind
Dec 31 18:00:21 DD-WRT user.info : [dnsmasq] : daemon successfully started
Dec 31 18:00:21 DD-WRT daemon.info dnsmasq[1540]: reading /tmp/resolv.dnsmasq
Dec 31 18:00:21 DD-WRT daemon.info dnsmasq[1540]: using nameserver 10.72.28.13#53
Dec 31 18:00:21 DD-WRT daemon.info dnsmasq[1540]: using only locally-known addresses for test
Dec 31 18:00:21 DD-WRT daemon.info dnsmasq[1540]: using only locally-known addresses for onion
Dec 31 18:00:21 DD-WRT daemon.info dnsmasq[1540]: using only locally-known addresses for localhost
Dec 31 18:00:21 DD-WRT daemon.info dnsmasq[1540]: using only locally-known addresses for local
Dec 31 18:00:21 DD-WRT daemon.info dnsmasq[1540]: using only locally-known addresses for invalid
Dec 31 18:00:21 DD-WRT daemon.info dnsmasq[1540]: using only locally-known addresses for bind
Dec 31 18:00:21 DD-WRT daemon.info dnsmasq[1540]: read /etc/hosts - 2 addresses
Dec 31 18:00:21 DD-WRT user.info : [vpn modules] : vpn modules successfully unloaded
Dec 31 18:00:21 DD-WRT user.info : [vpn modules] : nf_conntrack_proto_gre successfully loaded
Dec 31 18:00:21 DD-WRT user.info : [vpn modules] : nf_nat_proto_gre successfully loaded
Dec 31 18:00:21 DD-WRT user.info : [vpn modules] : nf_conntrack_pptp successfully loaded
Dec 31 18:00:21 DD-WRT user.info : [vpn modules] : nf_nat_pptp successfully loaded
Dec 31 18:00:22 DD-WRT user.info : [process_monitor] : successfully started
Dec 31 18:00:22 DD-WRT daemon.debug ntpclient[1718]: Connecting to 2.pool.ntp.org [45.79.192.248] ...
Oct 22 14:06:06 DD-WRT daemon.info ntpclient[1718]: Time set from 2.pool.ntp.org [45.79.192.248].
Oct 22 14:06:06 DD-WRT daemon.info process_monitor[1717]: cyclic NTP Update success (servers 2.pool.ntp.org 212.18.3.19 88.99.174.22)
Oct 22 14:06:07 DD-WRT user.info : [vpn modules] : vpn modules successfully unloaded
Oct 22 14:06:07 DD-WRT user.info : [vpn modules] : nf_conntrack_proto_gre successfully loaded
Oct 22 14:06:07 DD-WRT user.info : [vpn modules] : nf_nat_proto_gre successfully loaded
Oct 22 14:06:07 DD-WRT user.info : [vpn modules] : nf_conntrack_pptp successfully loaded
Oct 22 14:06:07 DD-WRT user.info : [vpn modules] : nf_nat_pptp successfully loaded
Oct 22 14:06:07 DD-WRT kern.info kernel: [ 23.635127] xhci-hcd xhci-hcd.1.auto: remove, state 1
Oct 22 14:06:07 DD-WRT kern.info kernel: [ 23.635166] usb usb4: USB disconnect, device number 1
Oct 22 14:06:07 DD-WRT kern.info kernel: [ 23.640715] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered
Oct 22 14:06:07 DD-WRT kern.info kernel: [ 23.644714] xhci-hcd xhci-hcd.1.auto: remove, state 1
Oct 22 14:06:07 DD-WRT kern.info kernel: [ 23.650045] usb usb3: USB disconnect, device number 1
Oct 22 14:06:07 DD-WRT kern.info kernel: [ 23.650052] usb 3-1: USB disconnect, device number 2
Oct 22 14:06:07 DD-WRT kern.info kernel: [ 23.660356] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered
Oct 22 14:06:07 DD-WRT kern.info kernel: [ 23.660833] xhci-hcd xhci-hcd.0.auto: remove, state 1
Oct 22 14:06:07 DD-WRT kern.info kernel: [ 23.660851] usb usb2: USB disconnect, device number 1
Oct 22 14:06:07 DD-WRT kern.info kernel: [ 23.660863] usb 2-1: USB disconnect, device number 2
Oct 22 14:06:07 DD-WRT kern.info kernel: [ 23.663776] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
Oct 22 14:06:07 DD-WRT kern.info kernel: [ 23.664210] xhci-hcd xhci-hcd.0.auto: remove, state 1
Oct 22 14:06:07 DD-WRT kern.info kernel: [ 23.664232] usb usb1: USB disconnect, device number 1
Oct 22 14:06:07 DD-WRT kern.info kernel: [ 23.665678] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
Oct 22 14:06:07 DD-WRT kern.info kernel: [ 23.720161] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Oct 22 14:06:07 DD-WRT kern.info kernel: [ 23.720249] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
Oct 22 14:06:07 DD-WRT kern.info kernel: [ 23.724754] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Oct 22 14:06:07 DD-WRT kern.info kernel: [ 23.732192] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
Oct 22 14:06:07 DD-WRT kern.info kernel: [ 23.742104] hub 1-0:1.0: USB hub found
Oct 22 14:06:07 DD-WRT kern.info kernel: [ 23.747692] hub 1-0:1.0: 1 port detected
Oct 22 14:06:07 DD-WRT kern.info kernel: [ 23.753450] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Oct 22 14:06:07 DD-WRT kern.info kernel: [ 23.754732] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 23.761496] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 23.768597] hub 2-0:1.0: USB hub found
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 23.779809] hub 2-0:1.0: 1 port detected
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 23.780379] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 23.783514] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 23.788930] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 23.796435] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 23.806743] hub 3-0:1.0: USB hub found
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 23.813657] hub 3-0:1.0: 1 port detected
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 23.822039] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 23.822093] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 23.831346] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 23.836048] hub 4-0:1.0: USB hub found
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 23.847788] hub 4-0:1.0: 1 port detected
Oct 22 14:06:08 DD-WRT kern.notice kernel: [ 23.899220] SCSI subsystem initialized
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 24.035676] usbcore: registered new interface driver usb-storage
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 24.099121] usb 3-1: new high-speed USB device number 2 using xhci-hcd
Oct 22 14:06:08 DD-WRT kern.debug kernel: [ 24.121420] libata version 3.00 loaded.
Oct 22 14:06:08 DD-WRT daemon.debug process_monitor[1717]: Restarting cron (time sync change)
Oct 22 14:06:08 DD-WRT user.info : [cron] : daemon successfully stopped
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 24.183333] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
Oct 22 14:06:08 DD-WRT user.info : [cron] : daemon successfully started
Oct 22 14:06:08 DD-WRT cron.info cron[2113]: (CRON) STARTUP (fork ok)
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 24.207368] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 24.208220] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 24.209242] usb-storage 2-1:1.0: USB Mass Storage device detected
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 24.219285] usb-storage 2-1:1.0: Quirks match for vid 090c pid 1000: 400
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 24.219368] scsi host0: usb-storage 2-1:1.0
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 24.235071] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 24.236592] scsi host1: ahci
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 24.236808] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 95
Oct 22 14:06:08 DD-WRT user.info : [process_monitor] : daemon successfully stopped
Oct 22 14:06:08 DD-WRT daemon.info process_monitor[1717]: [process_monitor] : cleanup timers
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 24.272338] usb-storage 3-1:1.0: USB Mass Storage device detected
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 24.277467] scsi host2: usb-storage 3-1:1.0
Oct 22 14:06:08 DD-WRT user.info : [process_monitor] : successfully started
Oct 22 14:06:08 DD-WRT daemon.debug process_monitor[2132]: We need to re-update after 3600 seconds
Oct 22 14:06:08 DD-WRT daemon.info process_monitor[2132]: [process_monitor] : set timer: 3600 seconds, callback: ntp_main()
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 24.570496] ata1: SATA link down (SStatus 0 SControl 300)
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 24.734138] sdhci: Secure Digital Host Controller Interface driver
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 24.734165] sdhci: Copyright(c) Pierre Ossman
Oct 22 14:06:08 DD-WRT kern.info kernel: [ 24.747355] sdhci-pltfm: SDHCI platform and OF driver helper
Oct 22 14:06:09 DD-WRT kern.notice kernel: [ 25.290026] scsi 2:0:0:0: Direct-Access USB Flash Drive 1.00 PQ: 0 ANSI: 6
Oct 22 14:06:09 DD-WRT kern.notice kernel: [ 25.475284] scsi 0:0:0:0: Direct-Access Samsung Flash Drive 1100 PQ: 0 ANSI: 6
Oct 22 14:06:09 DD-WRT kern.notice kernel: [ 25.477529] sd 0:0:0:0: [sda] 62656641 512-byte logical blocks: (32.1 GB/29.9 GiB)
Oct 22 14:06:09 DD-WRT kern.notice kernel: [ 25.482528] sd 2:0:0:0: [sdb] 30629376 512-byte logical blocks: (15.7 GB/14.6 GiB)
Oct 22 14:06:09 DD-WRT kern.notice kernel: [ 25.489994] sd 0:0:0:0: [sda] Write Protect is off
Oct 22 14:06:09 DD-WRT kern.notice kernel: [ 25.491017] sd 2:0:0:0: [sdb] Write Protect is off
Oct 22 14:06:09 DD-WRT kern.debug kernel: [ 25.491025] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
Oct 22 14:06:09 DD-WRT kern.notice kernel: [ 25.491304] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Oct 22 14:06:09 DD-WRT kern.info kernel: [ 25.497168] sdb: sdb1
Oct 22 14:06:09 DD-WRT kern.notice kernel: [ 25.499943] sd 2:0:0:0: [sdb] Attached SCSI removable disk
Oct 22 14:06:09 DD-WRT kern.debug kernel: [ 25.518383] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
Oct 22 14:06:09 DD-WRT kern.notice kernel: [ 25.518738] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 22 14:06:09 DD-WRT user.info : [cron] : daemon successfully stopped
Oct 22 14:06:09 DD-WRT user.info : [wsdd2] : windows service discovery daemon successfully stopped
Oct 22 14:06:09 DD-WRT user.err wsdd2[1290]: Terminated received.
Oct 22 14:06:09 DD-WRT user.info wsdd2[1290]: terminating.
Oct 22 14:06:09 DD-WRT user.info : [ksmbd.mountd] : samba daemon successfully stopped
Oct 22 14:06:09 DD-WRT local5.info ksmbd: [ksmbd-worker/1294]: INFO: Child received signal: 15 (Terminated)
Oct 22 14:06:09 DD-WRT local5.err ksmbd: [ksmbd-manager/1293]: ERROR: WARNING: child process exited abnormally: 1294
Oct 22 14:06:09 DD-WRT local5.err ksmbd: [ksmbd-manager/1293]: ERROR: can't execute kill 1294: No such process
Oct 22 14:06:09 DD-WRT local5.info ksmbd: [ksmbd-manager/1293]: INFO: Exiting. Bye!
Oct 22 14:06:09 DD-WRT kern.info kernel: [ 25.601130] ksmbd: kill command received
Oct 22 14:06:09 DD-WRT kern.info kernel: [ 25.745425] sda: sda1
Oct 22 14:06:09 DD-WRT kern.notice kernel: [ 25.747588] sd 0:0:0:0: [sda] Attached SCSI removable disk
Oct 22 14:06:10 DD-WRT user.info : [cron] : daemon successfully started
Oct 22 14:06:10 DD-WRT cron.info cron[2305]: (CRON) STARTUP (fork ok)
Oct 22 14:06:10 DD-WRT user.info : [cron] : daemon successfully stopped
Oct 22 14:06:10 DD-WRT kern.warn kernel: [ 26.501263] EXT4-fs (sda1): Ignoring removed nobh option
Oct 22 14:06:10 DD-WRT kern.info kernel: [ 26.503338] EXT4-fs (sda1): barriers disabled
Oct 22 14:06:10 DD-WRT kern.info kernel: [ 26.509338] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: init_itable=0,nobarrier,nobh,barrier=0
Oct 22 14:06:10 DD-WRT kern.warn kernel: [ 26.514045] EXT4-fs (sdb1): Ignoring removed nobh option
Oct 22 14:06:10 DD-WRT kern.info kernel: [ 26.523223] EXT4-fs (sdb1): barriers disabled
Oct 22 14:06:10 DD-WRT kern.info kernel: [ 26.544246] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: init_itable=0,nobarrier,nobh,barrier=0
Oct 22 14:06:10 DD-WRT user.info : [cron] : daemon successfully started
Oct 22 14:06:10 DD-WRT cron.info cron[2382]: (CRON) STARTUP (fork ok)
Oct 22 14:06:10 DD-WRT user.info : [cron] : daemon successfully stopped
Oct 22 14:06:10 DD-WRT user.info : [cron] : daemon successfully started
Oct 22 14:06:10 DD-WRT cron.info cron[2399]: (CRON) STARTUP (fork ok)
Oct 22 14:06:10 DD-WRT user.info : [cron] : daemon hanging, send SIGKILL
Oct 22 14:06:10 DD-WRT user.info : [cron] : daemon successfully started
Oct 22 14:06:10 DD-WRT cron.info cron[2419]: (CRON) STARTUP (fork ok)
Oct 22 14:06:10 DD-WRT cron.info cron[2419]: (crontabs) ORPHAN (no passwd entry)
Oct 22 14:06:11 DD-WRT daemon.info dnsmasq-dhcp[1540]: DHCPDISCOVER(br0) 192.168.1.121 90:b1:1c:9c:f3:ef
Oct 22 14:06:11 DD-WRT daemon.info dnsmasq-dhcp[1540]: DHCPOFFER(br0) 192.168.1.121 90:b1:1c:9c:f3:ef
Oct 22 14:06:11 DD-WRT daemon.info dnsmasq[1540]: reading /tmp/resolv.dnsmasq
Oct 22 14:06:11 DD-WRT daemon.info dnsmasq[1540]: using nameserver 10.72.28.13#53
Oct 22 14:06:11 DD-WRT daemon.info dnsmasq[1540]: using only locally-known addresses for test
Oct 22 14:06:11 DD-WRT daemon.info dnsmasq[1540]: using only locally-known addresses for onion
Oct 22 14:06:11 DD-WRT daemon.info dnsmasq[1540]: using only locally-known addresses for localhost
Oct 22 14:06:11 DD-WRT daemon.info dnsmasq[1540]: using only locally-known addresses for local
Oct 22 14:06:11 DD-WRT daemon.info dnsmasq[1540]: using only locally-known addresses for invalid
Oct 22 14:06:11 DD-WRT daemon.info dnsmasq[1540]: using only locally-known addresses for bind
Oct 22 14:06:11 DD-WRT daemon.info dnsmasq-dhcp[1540]: DHCPREQUEST(br0) 192.168.1.121 90:b1:1c:9c:f3:ef
Oct 22 14:06:11 DD-WRT daemon.info dnsmasq-dhcp[1540]: DHCPACK(br0) 192.168.1.121 90:b1:1c:9c:f3:ef daDeb
Oct 22 14:06:11 DD-WRT kern.info kernel: [ 27.166292] Linux kernel CIFS/SMB SERVER 3.4.2 by Namjae Jeon <linkinjeon@kernel.org>
Oct 22 14:06:11 DD-WRT user.info wsdd2[2529]: starting.
Oct 22 14:06:11 DD-WRT user.info : [smbd] : samba started
Oct 22 14:06:11 DD-WRT local5.info ksmbd: [ksmbd-worker/2539]: INFO: User already exists nobody
Oct 22 14:06:11 DD-WRT user.info : [smbd] : samba started
Oct 22 14:06:11 DD-WRT user.info wsdd2[2612]: starting.
Oct 22 14:06:11 DD-WRT local5.info ksmbd: [ksmbd-manager/2617]: INFO: File '/tmp/ksmbd.lock' belongs to pid 2537
Oct 22 14:06:11 DD-WRT local5.err ksmbd: [ksmbd-manager/2617]: ERROR: Failed to create lock file: File exists
Oct 22 14:06:11 DD-WRT local5.info ksmbd: [ksmbd-manager/2617]: INFO: Exiting. Bye!
Oct 22 14:06:11 DD-WRT user.info : [smbd] : samba started
Oct 22 14:06:11 DD-WRT user.info wsdd2[2630]: starting.
Oct 22 14:06:11 DD-WRT local5.info ksmbd: [ksmbd-manager/2636]: INFO: File '/tmp/ksmbd.lock' belongs to pid 2537
Oct 22 14:06:11 DD-WRT local5.err ksmbd: [ksmbd-manager/2636]: ERROR: Failed to create lock file: File exists
Oct 22 14:06:11 DD-WRT local5.info ksmbd: [ksmbd-manager/2636]: INFO: Exiting. Bye!
Oct 22 14:06:11 DD-WRT user.info : [smbd] : samba started
Oct 22 14:06:11 DD-WRT user.info wsdd2[2647]: starting.
Oct 22 14:06:11 DD-WRT local5.info ksmbd: [ksmbd-manager/2651]: INFO: File '/tmp/ksmbd.lock' belongs to pid 2537
Oct 22 14:06:11 DD-WRT local5.err ksmbd: [ksmbd-manager/2651]: ERROR: Failed to create lock file: File exists
Oct 22 14:06:11 DD-WRT local5.info ksmbd: [ksmbd-manager/2651]: INFO: Exiting. Bye!
Oct 22 14:07:57 DD-WRT daemon.info httpd[1348]: [httpd] : Authentication fail
Oct 22 14:07:57 DD-WRT daemon.err httpd[1348]: [httpd] : Request Error Code 401: Authorization required. Wrong username and/or password!
Oct 22 14:09:25 DD-WRT kern.err kernel: [ 221.380823] ksmbd: cannot get linux path (/mnt/sdb1/tmpJunk/CBM-links.txt), err = -22
Oct 22 14:10:50 DD-WRT kern.err kernel: [ 306.154742] ksmbd: cannot get linux path (/mnt/sdb1/tmpJunk/samba encryption.txt), err = -22
Oct 22 14:18:04 DD-WRT auth.info login[2767]: root login on 'pts/0'
root@DD-WRT:~# ps
PID USER VSZ STAT COMMAND
1 root 1036 S /sbin/init
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
5 root 0 SW< [kworker/0:0H]
6 root 0 SW [kworker/u4:0]
7 root 0 SW [rcu_sched]
8 root 0 SW [rcu_bh]
9 root 0 SW [migration/0]
10 root 0 SW< [lru-add-drain]
11 root 0 SW [cpuhp/0]
12 root 0 SW [cpuhp/1]
13 root 0 SW [migration/1]
14 root 0 SW [ksoftirqd/1]
16 root 0 SW< [kworker/1:0H]
17 root 0 SW [oom_reaper]
18 root 0 SW< [writeback]
19 root 0 SW [kcompactd0]
20 root 0 SW< [crypto]
21 root 0 SW< [bioset]
22 root 0 SW< [kblockd]
23 root 0 SW< [kworker/u5:0]
24 root 0 SW< [watchdogd]
25 root 0 SW [kswapd0]
26 root 0 SW [kworker/0:1]
27 root 0 SW< [vmstat]
53 root 0 SW< [cryptodev_queue]
54 root 0 SW [kworker/1:1]
57 root 0 SW< [bioset]
58 root 0 SW< [bioset]
59 root 0 SW< [bioset]
60 root 0 SW< [bioset]
61 root 0 SW< [bioset]
62 root 0 SW< [bioset]
63 root 0 SW< [bioset]
64 root 0 SW< [bioset]
65 root 0 SW< [bioset]
66 root 0 SW< [bioset]
67 root 0 SW< [bioset]
68 root 0 SW< [bioset]
69 root 0 SW< [bioset]
70 root 0 SW< [bioset]
71 root 0 SW< [bioset]
72 root 0 SW< [bioset]
73 root 0 SW< [bioset]
74 root 0 SW< [bioset]
75 root 0 SW< [bioset]
97 root 0 SW< [kworker/0:1H]
98 root 0 SW< [kworker/1:1H]
760 root 732 S /sbin/hotplug2 --set-rules-file /etc/hotplug2.rules --persistent
764 root 780 S /sbin/mstpd
772 root 952 S irqbalance -t 10
806 root 0 SW< [cfg80211]
807 root 0 SW [kworker/0:2]
818 root 0 SW< [ath10k_wq]
819 root 0 SW< [ath10k_aux_wq]
820 root 0 SW< [ath10k_tx_compl]
822 root 0 SW [kworker/u4:2]
824 root 0 SW< [ath10k_wq]
825 root 0 SW< [ath10k_aux_wq]
826 root 0 SW< [ath10k_tx_compl]
829 root 0 SW< [kworker/u5:2]
841 root 0 SW [kworker/1:2]
858 root 1772 S watchdog
1066 root 1384 R telnetd
1076 root 1376 S syslogd -Z -L
1078 root 1376 S klogd
1329 root 1432 S resetbutton
1348 root 4768 S httpd -n -p 80
1533 root 1736 S wland
1540 root 1788 S dnsmasq -u root -g root -C /tmp/dnsmasq.conf
1723 root 1376 S udhcpc -i vlan2 -p /var/run/udhcpc.pid -s /tmp/udhcpc -O routes -O msstaticroutes -O staticroutes
2094 root 0 SW< [ata_sff]
2116 root 0 SW [scsi_eh_0]
2118 root 0 SW< [scsi_tmf_0]
2120 root 0 SW [usb-storage]
2122 root 0 SW [scsi_eh_1]
2123 root 0 SW< [scsi_tmf_1]
2124 root 0 SW [scsi_eh_2]
2127 root 0 SW< [scsi_tmf_2]
2128 root 0 SW [usb-storage]
2132 root 1772 S process_monitor
2216 root 0 SW< [bioset]
2217 root 0 SW< [bioset]
2360 root 0 SW [jbd2/sda1-8]
2361 root 0 SW< [ext4-rsv-conver]
2366 root 0 SW [jbd2/sdb1-8]
2369 root 0 SW< [ext4-rsv-conver]
2419 root 708 S cron
2529 root 724 S wsdd2 -d -N DD-WRT -G WORKGROUP -b vendor:dd-wrt,model:Linksys EA8500,sku:47581
2537 root 836 S ksmbd.mountd -c /tmp/smb.conf -u /tmp/smb.db
2539 root 868 S ksmbd.mountd -c /tmp/smb.conf -u /tmp/smb.db
2544 root 0 SW [ksmbd-lo]
2547 root 0 SW [ksmbd-eth0]
2555 root 0 SW [ksmbd-vlan2]
2558 root 0 SW [ksmbd-br0]
2612 root 724 S wsdd2 -d -N DD-WRT -G WORKGROUP -b vendor:dd-wrt,model:Linksys EA8500,sku:47581
2630 root 724 S wsdd2 -d -N DD-WRT -G WORKGROUP -b vendor:dd-wrt,model:Linksys EA8500,sku:47581
2647 root 724 S wsdd2 -d -N DD-WRT -G WORKGROUP -b vendor:dd-wrt,model:Linksys EA8500,sku:47581
2767 root 1376 S -sh
2779 root 0 SW [kworker/u4:1]
2781 root 1376 R ps
root@DD-WRT:~# uptime
14:20:09 up 14 min, load average: 0.00, 0.00, 0.00
root@DD-WRT:~# date
Fri Oct 22 14:20:12 CDT 2021
root@DD-WRT:~#
Connection closed by foreign host.
mrjcd@daDeb:~$
try to copy simple text file
they do show --ONLY after unmount & remount drive
iffin you look they show 0 bytes
Also you CANNOT delete the stupid things
##############
Good Working build ...I can now delete the zero byte files :-)
mrjcd@daDeb:~$ ssh root@ea8500.mrjcd.com
DD-WRT v3.0-r47531 std (c) 2021 NewMedia-NET GmbH
Release: 10/11/21
Board: Linksys EA8500
==========================================================
___ ___ _ _____ ______ ____ ___
/ _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \
/ // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // /
/____/____/ |__/|__/_/|_| /_/ |___/____(_)___/
DD-WRT v3.0
https://www.dd-wrt.com
==========================================================
BusyBox v1.34.0 (2021-10-11 04:15:19 +07) built-in shell (ash)
root@EA8500:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux (LTO) version 4.9.285 (root@server2) (gcc version 10.0.1 (OpenWrt GCC 10.0.1 r12423-0493d57e04) ) #505 SMP Sun Oct 10 02:54:51 +07 2021
[ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt:Machine model: Linksys EA8500 WiFi Router
[ 0.000000] OF: fdt:Ignoring memory range 0x41500000 - 0x42000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 122880
[ 0.000000] free_area_init_node: node 0, pgdat c0a2eb40, node_mem_map ddc39000
[ 0.000000] Normal zone: 960 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 122880 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 12 pages/cpu s18956 r8192 d22004 u49152
[ 0.000000] pcpu-alloc: s18956 r8192 d22004 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920
[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:14
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 479264K/491520K available (5120K kernel code, 190K rwdata, 736K rodata, 1024K init, 395K bss, 12256K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xde800000 - 0xff800000 ( 528 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc0800000 (6112 kB)
[ 0.000000] .init : 0xc0900000 - 0xc0a00000 (1024 kB)
[ 0.000000] .data : 0xc0a00000 - 0xc0a2f818 ( 191 kB)
[ 0.000000] .bss : 0xc0a31000 - 0xc0a93ff1 ( 396 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[ 0.000009] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[ 0.000024] Switching to timer-based delay loop, resolution 160ns
[ 0.000246] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[ 0.000270] pid_max: default: 32768 minimum: 301
[ 0.000393] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000409] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.001081] CPU: Testing write buffer coherency: ok
[ 0.001400] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001452] Setting up static identity map for 0x42300000 - 0x4230003c
[ 0.004686] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.004888] Brought up 2 CPUs
[ 0.004909] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[ 0.004922] CPU: All CPU(s) started in SVC mode.
[ 0.018804] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.018834] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.018911] pinctrl core: initialized pinctrl subsystem
[ 0.020120] NET: Registered protocol family 16
[ 0.020179] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[ 0.020538] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.051774] cpuidle: using governor ladder
[ 0.104884] msm_bus_fabric_init_driver
[ 0.106254] pps_core: LinuxPPS API ver. 1 registered
[ 0.106270] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.106317] PTP clock support registered
[ 0.108734] clocksource: Switched to clocksource dg_timer
[ 0.113249] NET: Registered protocol family 2
[ 0.113435] IP idents hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.114397] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.114436] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.114491] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.114555] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.114580] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.114776] NET: Registered protocol family 1
[ 0.114830] PCI: CLS 0 bytes, default 64
[ 0.116280] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.126256] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.132470] cryptodev: driver 1.9 loaded.
[ 0.132509] io scheduler noop registered
[ 0.132525] io scheduler deadline registered (default)
[ 0.134437] 1b500000.pci supply vdda not found, using dummy regulator
[ 0.134551] 1b500000.pci supply vdda_phy not found, using dummy regulator
[ 0.134646] 1b500000.pci supply vdda_refclk not found, using dummy regulator
[ 0.135685] OF: PCI: host bridge /soc/pci@1b500000 ranges:
[ 0.135735] OF: PCI: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[ 0.135763] OF: PCI: MEM 0x08000000..0x0fdfffff -> 0x08000000
[ 0.239141] qcom-pcie 1b500000.pci: link up
[ 0.239334] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[ 0.239358] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.239378] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
[ 0.239394] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[ 0.239447] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.239611] pci 0000:00:00.0: supports D1
[ 0.239622] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.239939] PCI: bus0: Fast back to back transfers disabled
[ 0.240274] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.240526] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.241702] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.242296] PCI: bus1: Fast back to back transfers disabled
[ 0.242618] pci 0000:00:00.0: BAR 14: assigned [mem 0x08000000-0x081fffff]
[ 0.242645] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[ 0.242784] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.242810] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
[ 0.243241] aer 0000:00:00.0:pcie002: service driver aer loaded
[ 0.243739] 1b700000.pci supply vdda not found, using dummy regulator
[ 0.243862] 1b700000.pci supply vdda_phy not found, using dummy regulator
[ 0.243970] 1b700000.pci supply vdda_refclk not found, using dummy regulator
[ 0.244981] OF: PCI: host bridge /soc/pci@1b700000 ranges:
[ 0.245024] OF: PCI: IO 0x31e00000..0x31efffff -> 0x31e00000
[ 0.245051] OF: PCI: MEM 0x2e000000..0x31dfffff -> 0x2e000000
[ 0.349105] qcom-pcie 1b700000.pci: link up
[ 0.349301] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[ 0.349322] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.349340] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[ 0.349387] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.349523] pci 0001:00:00.0: supports D1
[ 0.349535] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[ 0.349815] PCI: bus0: Fast back to back transfers disabled
[ 0.350129] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.350359] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.351446] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.352024] PCI: bus1: Fast back to back transfers disabled
[ 0.352444] pci 0001:00:00.0: BAR 14: assigned [mem 0x2e000000-0x2e1fffff]
[ 0.352470] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[ 0.352594] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 0.352616] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
[ 0.353021] aer 0001:00:00.0:pcie002: service driver aer loaded
[ 0.353519] 1b900000.pci supply vdda not found, using dummy regulator
[ 0.353622] 1b900000.pci supply vdda_phy not found, using dummy regulator
[ 0.353711] 1b900000.pci supply vdda_refclk not found, using dummy regulator
[ 0.354740] OF: PCI: host bridge /soc/pci@1b900000 ranges:
[ 0.354782] OF: PCI: IO 0x35e00000..0x35efffff -> 0x35e00000
[ 0.354808] OF: PCI: MEM 0x32000000..0x35dfffff -> 0x32000000
[ 1.359124] qcom-pcie 1b900000.pci: phy link never came up
[ 1.360999] qcom-pcie 1b900000.pci: hostinit failed
[ 1.361816] deviceless supply s1b not found, using dummy regulator
[ 1.363546] L2 @ QSB rate. Forcing new rate.
[ 1.363714] L2 @ 800000 KHz
[ 1.363826] CPU0 @ 800000 KHz
[ 1.363837] CPU1 @ QSB rate. Forcing new rate.
[ 1.363962] CPU1 @ 800000 KHz
[ 1.366324] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[ 1.368132] serial8250_init
[ 1.368145] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 1.369390] msm_serial 16340000.serial: msm_serial: detected port #0
[ 1.369489] msm_serial 16340000.serial: uartclk = 7372800
[ 1.369570] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 201, base_baud = 460800) is a MSM
[ 1.369608] msm_serial: console setup on port #0
[ 2.116933] console [ttyMSM0] enabled
[ 2.121694] msm_serial: driver initialized
[ 2.127072] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
[ 2.129072] nand: AMD/Spansion S34MS01G2
[ 2.135502] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 2.139937] 19 ofpart partitions found on MTD device qcom_nand.0
[ 2.146790] Creating 19 MTD partitions on "qcom_nand.0":
[ 2.153044] 0x000000000000-0x000000040000 : "SBL1"
[ 2.159613] 0x000000040000-0x000000180000 : "MIBIB"
[ 2.165449] 0x000000180000-0x0000002c0000 : "SBL2"
[ 2.170287] 0x0000002c0000-0x000000540000 : "SBL3"
[ 2.173108] random: fast init done
[ 2.181065] 0x000000540000-0x000000660000 : "DDRCONFIG"
[ 2.183751] 0x000000660000-0x000000780000 : "SSD"
[ 2.188304] 0x000000780000-0x000000a00000 : "TZ"
[ 2.195391] 0x000000a00000-0x000000c80000 : "RPM"
[ 2.200054] 0x000000c80000-0x000000dc0000 : "art"
[ 2.202823] 0x000000dc0000-0x000000ec0000 : "APPSBL"
[ 2.206896] 0x000000ec0000-0x000000f00000 : "u_env"
[ 2.210979] 0x000000f00000-0x000000f40000 : "s_env"
[ 2.215486] 0x000000f40000-0x000000f80000 : "devinfo"
[ 2.220346] 0x000000f80000-0x000003780000 : "linux"
[ 2.282074] 0x000001280000-0x000003780000 : "rootfs"
[ 2.335670] mtd: partition "rootfs" set to be root filesystem
[ 2.335700] 0x000003780000-0x000005f40000 : "linux2"
[ 2.397708] 0x000003a80000-0x000005f40000 : "rootfs2"
[ 2.451120] 0x000005f40000-0x000005f80000 : "nvram"
[ 2.452357] 0x000005f80000-0x000008000000 : "ddwrt"
[ 2.477768] random: crng init done
[ 2.503081] libphy: GPIO Bitbanged MDIO: probed
[ 2.506479] libphy: Fixed MDIO Bus: probed
[ 2.528346] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
[ 3.352363] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 3.352392] Ring mode enabled
[ 3.356388] DMA HW capability register supported
[ 3.359437] Enhanced/Alternate descriptors
[ 3.364982] Enabled extended descriptors
[ 3.367943] RX Checksum Offload Engine supported
[ 3.372173] COE Type 2
[ 3.376792] TX Checksum insertion supported
[ 3.379107] Wake-Up On Lan supported
[ 3.383574] eth%d: device MAC address 00:06:3b:01:41:00
[ 3.387129] Enable RX Mitigation via HW Watchdog Timer
[ 3.393659] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 3.397371] Ring mode enabled
[ 3.402667] DMA HW capability register supported
[ 3.405531] Enhanced/Alternate descriptors
[ 3.411170] Enabled extended descriptors
[ 3.414128] RX Checksum Offload Engine supported
[ 3.418296] COE Type 2
[ 3.423029] TX Checksum insertion supported
[ 3.425239] Wake-Up On Lan supported
[ 3.429819] eth%d: device MAC address 00:03:7f:ba:db:02
[ 3.433314] Enable RX Mitigation via HW Watchdog Timer
[ 3.439313] i2c /dev entries driver
[ 3.444262] Calibration not found.
[ 3.448200] CPUidle arm: CPU 0 failed to init idle CPU ops
[ 3.451092] GACT probability NOT on
[ 3.455979] Mirror/redirect action on
[ 3.459453] Simple TC action Loaded
[ 3.463788] netem: version 1.3
[ 3.466498] u32 classifier
[ 3.469672] Performance counters on
[ 3.472287] input device check on
[ 3.476019] Actions configured
[ 3.479925] Netfilter messages via NETLINK v0.30.
[ 3.483533] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 3.488588] nf_conntrack_rtsp v0.7 loading
[ 3.494300] xt_time: kernel timezone is -0000
[ 3.497906] ip_set: protocol 6
[ 3.502640] gre: GRE over IPv4 demultiplexor driver
[ 3.505673] nf_nat_rtsp v0.7 loading
[ 3.510173] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.514133] NET: Registered protocol family 17
[ 3.519342] Bridge firewalling registered
[ 3.523420] 8021q: 802.1Q VLAN Support v1.8
[ 3.529854] Registering SWP/SWPB emulation handler
[ 3.531944] registered taskstats version 1
[ 3.546331] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
[ 3.565152] s1a: Bringing 0uV into 1050000-1050000uV
[ 3.565436] s1b: Bringing 0uV into 1050000-1050000uV
[ 3.569491] s2a: Bringing 0uV into 800000-800000uV
[ 3.574363] s2b: Bringing 0uV into 800000-800000uV
[ 3.583384] trying to register driver cpufreq-dt
[ 3.585237] searching for nvram
[ 3.588388] nvram size = 262144
[ 3.680113] found nvram at 20000
[ 3.728584] no valid UBI magic found inside mtd13
[ 3.728642] hctosys: unable to open rtc device (rtc0)
[ 3.739297] VFS: Mounted root (squashfs filesystem) readonly on device 31:14.
[ 3.740973] Freeing unused kernel memory: 1024K
[ 7.450582] Loading modules backported from Linux version v5.10-rc6-0-gb65054597872
[ 7.450612] Backport generated by backports.git v5.10-rc6-1-0-g3a9d70a3
[ 7.928637] ath9k: ath9k: Driver unloaded
[ 8.263816] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 8.264499] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 8.430512] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[ 8.742302] ath10k_pci 0000:01:00.0: found firmware features ie (8 B)
[ 8.742344] ath10k_pci 0000:01:00.0: Unknown FW IE: 30
[ 8.747738] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
[ 8.752867] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[ 8.765090] ath10k_pci 0000:01:00.0: firmware ver 10.4-ddwrt-9980-tW-13-6284M api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate crc32 037de748
[ 8.822459] ath10k_pci 0000:01:00.0: boot get otp board id result 0x00008800 board_id 2 chip_id 1 ext_bid_support 0
[ 8.822501] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=2'
[ 8.831778] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=2'
[ 8.862341] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:2 crc32 792a3d38
[ 8.883512] ath10k_pci 0000:01:00.0: boot already acquired valid otp board id,skip download, board_id 2 chip_id 1
[ 8.904066] ath10k_pci 0000:01:00.0: boot upload otp to 0x1234 len 9477
[ 9.957864] ath10k_pci 0000:01:00.0: Init Max Stations to 64
[ 10.030489] ath10k_pci 0000:01:00.0: wmi debug print truncated: 128
[ 10.030531] ath10k_pci 0000:01:00.0: ChipType 1200 ChipTypeID 0 BoardID 1 P 80/80 V 16 K 160 PH 272 T 282 msdu-desc: 2500 sw-crypt: 0 c
[ 10.035750] ath10k_pci 0000:01:00.0: free: 24820 iram: 34016 sram: 18196
[ 10.048151] ath10k_pci 0000:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr c0:56:27:08:b2:92 status 0
[ 10.085617] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 64 raw 0 hwcrypto 1
[ 10.189555] ath: EEPROM regdomain sanitized
[ 10.189564] ath: EEPROM regdomain: 0x64
[ 10.189570] ath: EEPROM indicates we should expect a direct regpair map
[ 10.189584] ath: Country alpha2 being used: 00
[ 10.189590] ath: Regpair used: 0x64
[ 10.189644] initialize fq_codel with 33554432 bytes memory limit
[ 10.189805] ieee80211_txq_setup_flows: set limit to 4194304 bytes
[ 10.198991] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[ 10.201411] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 10.390427] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[ 10.390493] ath10k_pci 0001:01:00.0: found firmware features ie (8 B)
[ 10.400111] ath10k_pci 0001:01:00.0: Unknown FW IE: 30
[ 10.406542] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
[ 10.411668] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[ 10.424838] ath10k_pci 0001:01:00.0: firmware ver 10.4-ddwrt-9980-tW-13-6284M api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate crc32 037de748
[ 10.481094] ath10k_pci 0001:01:00.0: boot get otp board id result 0x00008400 board_id 1 chip_id 1 ext_bid_support 0
[ 10.481143] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=1'
[ 10.490409] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=1'
[ 10.500466] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:1 crc32 792a3d38
[ 10.529226] ath10k_pci 0001:01:00.0: boot already acquired valid otp board id,skip download, board_id 1 chip_id 1
[ 10.549686] ath10k_pci 0001:01:00.0: boot upload otp to 0x1234 len 9477
[ 11.599527] ath10k_pci 0001:01:00.0: Init Max Stations to 64
[ 11.670020] ath10k_pci 0001:01:00.0: wmi debug print truncated: 128
[ 11.670051] ath10k_pci 0001:01:00.0: ChipType 1200 ChipTypeID 0 BoardID 2 P 80/80 V 16 K 160 PH 272 T 282 msdu-desc: 2500 sw-crypt: 0 c
[ 11.675197] ath10k_pci 0001:01:00.0: free: 24820 iram: 34016 sram: 18196
[ 11.687678] ath10k_pci 0001:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr c0:56:27:08:b2:92 status 0
[ 11.724701] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 64 raw 0 hwcrypto 1
[ 11.827322] ath: EEPROM regdomain sanitized
[ 11.827335] ath: EEPROM regdomain: 0x64
[ 11.827343] ath: EEPROM indicates we should expect a direct regpair map
[ 11.827363] ath: Country alpha2 being used: 00
[ 11.827371] ath: Regpair used: 0x64
[ 11.827463] initialize fq_codel with 33554432 bytes memory limit
[ 11.827737] ieee80211_txq_setup_flows: set limit to 33554432 bytes
[ 13.130391] dwmac1000: Master AXI performs any burst length
[ 13.130458] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 13.135041] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[ 13.262604] dwmac1000: Master AXI performs any burst length
[ 13.262645] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 13.267108] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 14.169132] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 15.329085] device br0 entered promiscuous mode
[ 15.395839] br0: port 1(vlan1) entered blocking state
[ 15.395863] br0: port 1(vlan1) entered disabled state
[ 15.400452] device vlan1 entered promiscuous mode
[ 15.405111] device eth0 entered promiscuous mode
[ 15.409940] br0: port 1(vlan1) entered blocking state
[ 15.414489] br0: port 1(vlan1) entered forwarding state
[ 15.452703] br0: port 2(vlan2) entered blocking state
[ 15.452727] br0: port 2(vlan2) entered disabled state
[ 15.456984] device vlan2 entered promiscuous mode
[ 15.461968] br0: port 2(vlan2) entered blocking state
[ 15.466495] br0: port 2(vlan2) entered forwarding state
[ 15.478683] device br0 left promiscuous mode
[ 15.481357] device br0 entered promiscuous mode
[ 15.488471] device br0 left promiscuous mode
[ 15.589399] ath: EEPROM regdomain: 0x8348
[ 15.589405] ath: EEPROM indicates we should expect a country code
[ 15.589412] ath: doing EEPROM country->regdmn map search
[ 15.589418] ath: country maps to regdmn code: 0x3a
[ 15.589422] ath: Country alpha2 being used: US
[ 15.589426] ath: Regpair used: 0x3a
[ 15.589431] ath: regdomain 0x8348 dynamically updated by user
[ 15.589452] ath: EEPROM regdomain: 0x8348
[ 15.589455] ath: EEPROM indicates we should expect a country code
[ 15.589461] ath: doing EEPROM country->regdmn map search
[ 15.589467] ath: country maps to regdmn code: 0x3a
[ 15.589470] ath: Country alpha2 being used: US
[ 15.589474] ath: Regpair used: 0x3a
[ 15.589478] ath: regdomain 0x8348 dynamically updated by user
[ 16.030036] tun: Universal TUN/TAP device driver, 1.6
[ 16.030061] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 17.295275] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 17.314284] Linux kernel CIFS/SMB SERVER 3.4.2 by Namjae Jeon <linkinjeon@kernel.org>
[ 19.056914] usbcore: registered new interface driver usbfs
[ 19.057024] usbcore: registered new interface driver hub
[ 19.061434] usbcore: registered new device driver usb
[ 19.113437] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 19.121252] ehci-platform: EHCI generic platform driver
[ 19.141672] ehci-pci: EHCI PCI platform driver
[ 19.270557] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 19.688236] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 19.688324] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 19.692914] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 19.700281] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
[ 19.710051] hub 1-0:1.0: USB hub found
[ 19.719223] hub 1-0:1.0: 1 port detected
[ 19.722936] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 19.722980] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 19.728773] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 19.737023] hub 2-0:1.0: USB hub found
[ 19.747327] hub 2-0:1.0: 1 port detected
[ 19.828591] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 19.828643] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 19.833241] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 19.840647] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
[ 19.849875] hub 3-0:1.0: USB hub found
[ 19.855578] hub 3-0:1.0: 1 port detected
[ 19.859739] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 19.863168] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 19.868558] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 19.876756] hub 4-0:1.0: USB hub found
[ 19.888148] hub 4-0:1.0: 1 port detected
[ 20.138994] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 20.288938] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 21.229172] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 24.948352] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 24.948393] usb usb4: USB disconnect, device number 1
[ 24.953410] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered
[ 24.957628] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 24.963261] usb usb3: USB disconnect, device number 1
[ 24.968091] usb 3-1: USB disconnect, device number 2
[ 24.978691] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered
[ 24.979469] xhci-hcd xhci-hcd.0.auto: remove, state 1
[ 24.983821] usb usb2: USB disconnect, device number 1
[ 24.988753] usb 2-1: USB disconnect, device number 2
[ 25.000509] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
[ 25.000710] xhci-hcd xhci-hcd.0.auto: remove, state 1
[ 25.005249] usb usb1: USB disconnect, device number 1
[ 25.012187] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
[ 25.057130] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 25.057218] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 25.061739] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 25.069156] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
[ 25.078325] hub 1-0:1.0: USB hub found
[ 25.084382] hub 1-0:1.0: 1 port detected
[ 25.087945] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 25.091750] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 25.097039] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 25.105141] hub 2-0:1.0: USB hub found
[ 25.113002] hub 2-0:1.0: 1 port detected
[ 25.116805] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 25.120571] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 25.125912] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 25.133399] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
[ 25.142838] hub 3-0:1.0: USB hub found
[ 25.148268] hub 3-0:1.0: 1 port detected
[ 25.152272] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 25.155886] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 25.161326] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 25.169441] hub 4-0:1.0: USB hub found
[ 25.177299] hub 4-0:1.0: 1 port detected
[ 25.217600] SCSI subsystem initialized
[ 25.334624] usbcore: registered new interface driver usb-storage
[ 25.392808] libata version 3.00 loaded.
[ 25.450680] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 25.460112] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
[ 25.460165] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 25.464489] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
[ 25.474373] scsi host0: ahci
[ 25.481617] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 95
[ 25.518992] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 25.540890] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 25.541062] usb-storage 2-1:1.0: Quirks match for vid 090c pid 1000: 400
[ 25.546036] scsi host1: usb-storage 2-1:1.0
[ 25.609855] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 25.610608] scsi host2: usb-storage 3-1:1.0
[ 25.820499] ata1: SATA link down (SStatus 0 SControl 300)
[ 25.982790] sdhci: Secure Digital Host Controller Interface driver
[ 25.982817] sdhci: Copyright(c) Pierre Ossman
[ 25.995872] sdhci-pltfm: SDHCI platform and OF driver helper
[ 26.659877] scsi 2:0:0:0: Direct-Access USB Flash Drive 1.00 PQ: 0 ANSI: 6
[ 26.756004] scsi 1:0:0:0: Direct-Access Samsung Flash Drive 1100 PQ: 0 ANSI: 6
[ 26.758206] sd 2:0:0:0: [sdb] 30629376 512-byte logical blocks: (15.7 GB/14.6 GiB)
[ 26.763243] sd 1:0:0:0: [sda] 62656641 512-byte logical blocks: (32.1 GB/29.9 GiB)
[ 26.763647] sd 1:0:0:0: [sda] Write Protect is off
[ 26.763654] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 26.763824] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 26.784010] sd 2:0:0:0: [sdb] Write Protect is off
[ 26.791868] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 26.792355] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 26.799704] sdb: sdb1
[ 26.808079] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 26.890790] ksmbd: kill command received
[ 26.987157] sda: sda1
[ 26.995061] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 27.716856] EXT4-fs (sda1): Ignoring removed nobh option
[ 27.720408] EXT4-fs (sda1): barriers disabled
[ 27.724666] EXT4-fs (sda1): recovery complete
[ 27.725494] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: init_itable=0,nobarrier,nobh,barrier=0
[ 27.912766] EXT4-fs (sdb1): Ignoring removed nobh option
[ 27.918966] EXT4-fs (sdb1): barriers disabled
[ 27.942855] EXT4-fs (sdb1): recovery complete
[ 27.942884] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: init_itable=0,nobarrier,nobh,barrier=0
[ 28.405020] Linux kernel CIFS/SMB SERVER 3.4.2 by Namjae Jeon <linkinjeon@kernel.org>
root@EA8500:~# cat /tmp/smb.conf
[global]
log level = 1
netbios name = EA8500
server string =
syslog = 10
encrypt passwords = true
preferred master = yes
use sendfile = yes
aio read size = 2048
aio write size = 2048
large readwrite = yes
security = user
oplocks = yes
mangled names = no
max stat cache size = 64
workgroup =
bind interfaces only = yes
guest account = nobody
map to guest = bad user
smb passwd file = /var/samba/smbpasswd
private dir = /var/samba
passdb backend = smbpasswd
log file = /var/smbd.log
max log size = 1000
socket options = TCP_NODELAY IPTOS_LOWDELAY SO_SNDBUF=262144 SO_RCVBUF=262144
read raw = yes
write raw = yes
max xmit = 65536
dead time = 15
getwd cache = yes
lpq cache time = 30
server min protocol = SMB2_10
server max protocol = SMB3_11
printing = none
load printers = No
usershare allow guests = Yes
smb3 encryption = yes
[32GBext4]
comment = 32GBext4
path = /mnt/sda1
read only = no
guest ok = no
valid users = mrjcd
force user = root
[16GBext4]
comment = 16GBext4
path = /mnt/sdb1
read only = no
guest ok = no
valid users = mrjcd
force user = root
root@EA8500:~# cat /tmp/var/log/messages
Dec 31 18:00:14 EA8500 syslog.info syslogd started: BusyBox v1.34.0
Dec 31 18:00:14 EA8500 kern.notice kernel: klogd started: BusyBox v1.34.0 (2021-10-11 04:15:19 +07)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Booting Linux on physical CPU 0x0
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] Linux (LTO) version 4.9.285 (root@server2) (gcc version 10.0.1 (OpenWrt GCC 10.0.1 r12423-0493d57e04) ) #505 SMP Sun Oct 10 02:54:51 +07 2021
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] CPU: div instructions available: patching division code
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] OF: fdt:Machine model: Linksys EA8500 WiFi Router
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.000000] OF: fdt:Ignoring memory range 0x41500000 - 0x42000000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Memory policy: Data cache writealloc
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] On node 0 totalpages: 122880
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat c0a2eb40, node_mem_map ddc39000
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] Normal zone: 960 pages used for memmap
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] Normal zone: 122880 pages, LIFO batch:31
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] percpu: Embedded 12 pages/cpu s18956 r8192 d22004 u49152
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] pcpu-alloc: s18956 r8192 d22004 u49152 alloc=12*4096
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:14
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Memory: 479264K/491520K available (5120K kernel code, 190K rwdata, 736K rodata, 1024K init, 395K bss, 12256K reserved, 0K cma-reserved, 0K highmem)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] Virtual kernel memory layout:
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] vmalloc : 0xde800000 - 0xff800000 ( 528 MB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] .text : 0xc0208000 - 0xc0800000 (6112 kB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] .init : 0xc0900000 - 0xc0a00000 (1024 kB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] .data : 0xc0a00000 - 0xc0a2f818 ( 191 kB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] .bss : 0xc0a31000 - 0xc0a93ff1 ( 396 kB)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Hierarchical RCU implementation.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] NR_IRQS:16 nr_irqs:16 16
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000009] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000024] Switching to timer-based delay loop, resolution 160ns
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000246] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000270] pid_max: default: 32768 minimum: 301
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000393] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Dec 31 18:00:14 EA8500 user.info : [klogd] : daemon successfully started
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000409] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.001081] CPU: Testing write buffer coherency: ok
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.001400] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.001452] Setting up static identity map for 0x42300000 - 0x4230003c
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.004686] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.004888] Brought up 2 CPUs
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.004909] SMP: Total of 2 processors activated (25.00 BogoMIPS).
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.004922] CPU: All CPU(s) started in SVC mode.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.018804] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.018834] futex hash table entries: 512 (order: 3, 32768 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.018911] pinctrl core: initialized pinctrl subsystem
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.020120] NET: Registered protocol family 16
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.020179] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.020538] DMA: preallocated 256 KiB pool for atomic coherent allocations
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.051774] cpuidle: using governor ladder
Dec 31 18:00:14 EA8500 kern.err kernel: [ 0.104884] msm_bus_fabric_init_driver
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.106254] pps_core: LinuxPPS API ver. 1 registered
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.106270] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.106317] PTP clock support registered
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.108734] clocksource: Switched to clocksource dg_timer
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.113249] NET: Registered protocol family 2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.113435] IP idents hash table entries: 8192 (order: 4, 65536 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.114397] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.114436] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.114491] TCP: Hash tables configured (established 4096 bind 4096)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.114555] UDP hash table entries: 256 (order: 1, 8192 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.114580] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.114776] NET: Registered protocol family 1
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.114830] PCI: CLS 0 bytes, default 64
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.116280] workingset: timestamp_bits=30 max_order=17 bucket_order=0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.126256] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.132470] cryptodev: driver 1.9 loaded.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.132509] io scheduler noop registered
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.132525] io scheduler deadline registered (default)
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.134437] 1b500000.pci supply vdda not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.134551] 1b500000.pci supply vdda_phy not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.134646] 1b500000.pci supply vdda_refclk not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.135685] OF: PCI: host bridge /soc/pci@1b500000 ranges:
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.135735] OF: PCI: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.135763] OF: PCI: MEM 0x08000000..0x0fdfffff -> 0x08000000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.239141] qcom-pcie 1b500000.pci: link up
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.239334] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.239358] pci_bus 0000:00: root bus resource [bus 00-ff]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.239378] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.239394] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.239447] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.239611] pci 0000:00:00.0: supports D1
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.239622] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.239939] PCI: bus0: Fast back to back transfers disabled
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.240274] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.240526] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.241702] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.242296] PCI: bus1: Fast back to back transfers disabled
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.242618] pci 0000:00:00.0: BAR 14: assigned [mem 0x08000000-0x081fffff]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.242645] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.242784] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.242810] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.243241] aer 0000:00:00.0:pcie002: service driver aer loaded
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.243739] 1b700000.pci supply vdda not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.243862] 1b700000.pci supply vdda_phy not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.243970] 1b700000.pci supply vdda_refclk not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.244981] OF: PCI: host bridge /soc/pci@1b700000 ranges:
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.245024] OF: PCI: IO 0x31e00000..0x31efffff -> 0x31e00000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.245051] OF: PCI: MEM 0x2e000000..0x31dfffff -> 0x2e000000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.349105] qcom-pcie 1b700000.pci: link up
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.349301] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.349322] pci_bus 0001:00: root bus resource [bus 00-ff]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.349340] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.349387] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.349523] pci 0001:00:00.0: supports D1
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.349535] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.349815] PCI: bus0: Fast back to back transfers disabled
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.350129] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.350359] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.351446] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.352024] PCI: bus1: Fast back to back transfers disabled
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.352444] pci 0001:00:00.0: BAR 14: assigned [mem 0x2e000000-0x2e1fffff]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.352470] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.352594] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.352616] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.353021] aer 0001:00:00.0:pcie002: service driver aer loaded
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.353519] 1b900000.pci supply vdda not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.353622] 1b900000.pci supply vdda_phy not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.353711] 1b900000.pci supply vdda_refclk not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.354740] OF: PCI: host bridge /soc/pci@1b900000 ranges:
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.354782] OF: PCI: IO 0x35e00000..0x35efffff -> 0x35e00000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.354808] OF: PCI: MEM 0x32000000..0x35dfffff -> 0x32000000
Dec 31 18:00:14 EA8500 kern.err kernel: [ 1.359124] qcom-pcie 1b900000.pci: phy link never came up
Dec 31 18:00:14 EA8500 kern.err kernel: [ 1.360999] qcom-pcie 1b900000.pci: hostinit failed
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 1.361816] deviceless supply s1b not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.363546] L2 @ QSB rate. Forcing new rate.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.363714] L2 @ 800000 KHz
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.363826] CPU0 @ 800000 KHz
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.363837] CPU1 @ QSB rate. Forcing new rate.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.363962] CPU1 @ 800000 KHz
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.366324] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.368132] serial8250_init
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.368145] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.369390] msm_serial 16340000.serial: msm_serial: detected port #0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.369489] msm_serial 16340000.serial: uartclk = 7372800
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.369570] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 201, base_baud = 460800) is a MSM
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.369608] msm_serial: console setup on port #0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.116933] console [ttyMSM0] enabled
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.121694] msm_serial: driver initialized
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.127072] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.129072] nand: AMD/Spansion S34MS01G2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.135502] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.139937] 19 ofpart partitions found on MTD device qcom_nand.0
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.146790] Creating 19 MTD partitions on "qcom_nand.0":
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.153044] 0x000000000000-0x000000040000 : "SBL1"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.159613] 0x000000040000-0x000000180000 : "MIBIB"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.165449] 0x000000180000-0x0000002c0000 : "SBL2"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.170287] 0x0000002c0000-0x000000540000 : "SBL3"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.173108] random: fast init done
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.181065] 0x000000540000-0x000000660000 : "DDRCONFIG"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.183751] 0x000000660000-0x000000780000 : "SSD"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.188304] 0x000000780000-0x000000a00000 : "TZ"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.195391] 0x000000a00000-0x000000c80000 : "RPM"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.200054] 0x000000c80000-0x000000dc0000 : "art"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.202823] 0x000000dc0000-0x000000ec0000 : "APPSBL"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.206896] 0x000000ec0000-0x000000f00000 : "u_env"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.210979] 0x000000f00000-0x000000f40000 : "s_env"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.215486] 0x000000f40000-0x000000f80000 : "devinfo"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.220346] 0x000000f80000-0x000003780000 : "linux"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.282074] 0x000001280000-0x000003780000 : "rootfs"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.335670] mtd: partition "rootfs" set to be root filesystem
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.335700] 0x000003780000-0x000005f40000 : "linux2"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.397708] 0x000003a80000-0x000005f40000 : "rootfs2"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.451120] 0x000005f40000-0x000005f80000 : "nvram"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.452357] 0x000005f80000-0x000008000000 : "ddwrt"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.477768] random: crng init done
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.503081] libphy: GPIO Bitbanged MDIO: probed
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.506479] libphy: Fixed MDIO Bus: probed
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.528346] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.352363] stmmac - user ID: 0x10, Synopsys ID: 0x37
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.352392] Ring mode enabled
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.356388] DMA HW capability register supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.359437] Enhanced/Alternate descriptors
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.364982] Enabled extended descriptors
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.367943] RX Checksum Offload Engine supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.372173] COE Type 2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.376792] TX Checksum insertion supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.379107] Wake-Up On Lan supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.383574] eth%d: device MAC address 00:06:3b:01:41:00
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.387129] Enable RX Mitigation via HW Watchdog Timer
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.393659] stmmac - user ID: 0x10, Synopsys ID: 0x37
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.397371] Ring mode enabled
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.402667] DMA HW capability register supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.405531] Enhanced/Alternate descriptors
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.411170] Enabled extended descriptors
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.414128] RX Checksum Offload Engine supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.418296] COE Type 2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.423029] TX Checksum insertion supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.425239] Wake-Up On Lan supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.429819] eth%d: device MAC address 00:03:7f:ba:db:02
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.433314] Enable RX Mitigation via HW Watchdog Timer
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.439313] i2c /dev entries driver
Dec 31 18:00:14 EA8500 kern.err kernel: [ 3.444262] Calibration not found.
Dec 31 18:00:14 EA8500 kern.err kernel: [ 3.448200] CPUidle arm: CPU 0 failed to init idle CPU ops
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.451092] GACT probability NOT on
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.455979] Mirror/redirect action on
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.459453] Simple TC action Loaded
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.463788] netem: version 1.3
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.466498] u32 classifier
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.469672] Performance counters on
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.472287] input device check on
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.476019] Actions configured
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.479925] Netfilter messages via NETLINK v0.30.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.483533] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 3.488588] nf_conntrack_rtsp v0.7 loading
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.494300] xt_time: kernel timezone is -0000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.497906] ip_set: protocol 6
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.502640] gre: GRE over IPv4 demultiplexor driver
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 3.505673] nf_nat_rtsp v0.7 loading
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.510173] ip_tables: (C) 2000-2006 Netfilter Core Team
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.514133] NET: Registered protocol family 17
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 3.519342] Bridge firewalling registered
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.523420] 8021q: 802.1Q VLAN Support v1.8
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 3.529854] Registering SWP/SWPB emulation handler
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.531944] registered taskstats version 1
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.546331] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.565152] s1a: Bringing 0uV into 1050000-1050000uV
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.565436] s1b: Bringing 0uV into 1050000-1050000uV
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.569491] s2a: Bringing 0uV into 800000-800000uV
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.574363] s2b: Bringing 0uV into 800000-800000uV
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.583384] trying to register driver cpufreq-dt
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.585237] searching for nvram
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.588388] nvram size = 262144
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.680113] found nvram at 20000
Dec 31 18:00:14 EA8500 kern.err kernel: [ 3.728584] no valid UBI magic found inside mtd13
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.728642] hctosys: unable to open rtc device (rtc0)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.739297] VFS: Mounted root (squashfs filesystem) readonly on device 31:14.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.740973] Freeing unused kernel memory: 1024K
Dec 31 18:00:14 EA8500 kern.info kernel: [ 7.450582] Loading modules backported from Linux version v5.10-rc6-0-gb65054597872
Dec 31 18:00:14 EA8500 kern.info kernel: [ 7.450612] Backport generated by backports.git v5.10-rc6-1-0-g3a9d70a3
Dec 31 18:00:14 EA8500 kern.info kernel: [ 7.928637] ath9k: ath9k: Driver unloaded
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.263816] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.264499] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 8.430512] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.742302] ath10k_pci 0000:01:00.0: found firmware features ie (8 B)
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 8.742344] ath10k_pci 0000:01:00.0: Unknown FW IE: 30
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.747738] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.752867] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.765090] ath10k_pci 0000:01:00.0: firmware ver 10.4-ddwrt-9980-tW-13-6284M api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate crc32 037de748
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.822459] ath10k_pci 0000:01:00.0: boot get otp board id result 0x00008800 board_id 2 chip_id 1 ext_bid_support 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.822501] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=2'
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.831778] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=2'
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.862341] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:2 crc32 792a3d38
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.883512] ath10k_pci 0000:01:00.0: boot already acquired valid otp board id,skip download, board_id 2 chip_id 1
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.904066] ath10k_pci 0000:01:00.0: boot upload otp to 0x1234 len 9477
Dec 31 18:00:14 EA8500 kern.info kernel: [ 9.957864] ath10k_pci 0000:01:00.0: Init Max Stations to 64
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 10.030489] ath10k_pci 0000:01:00.0: wmi debug print truncated: 128
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.030531] ath10k_pci 0000:01:00.0: ChipType 1200 ChipTypeID 0 BoardID 1 P 80/80 V 16 K 160 PH 272 T 282 msdu-desc: 2500 sw-crypt: 0 c
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.035750] ath10k_pci 0000:01:00.0: free: 24820 iram: 34016 sram: 18196
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.048151] ath10k_pci 0000:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr c0:56:27:08:b2:92 status 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.085617] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 64 raw 0 hwcrypto 1
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 10.189555] ath: EEPROM regdomain sanitized
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 10.189564] ath: EEPROM regdomain: 0x64
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 10.189570] ath: EEPROM indicates we should expect a direct regpair map
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 10.189584] ath: Country alpha2 being used: 00
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 10.189590] ath: Regpair used: 0x64
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.189644] initialize fq_codel with 33554432 bytes memory limit
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.189805] ieee80211_txq_setup_flows: set limit to 4194304 bytes
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.198991] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.201411] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 10.390427] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.390493] ath10k_pci 0001:01:00.0: found firmware features ie (8 B)
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 10.400111] ath10k_pci 0001:01:00.0: Unknown FW IE: 30
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.406542] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.411668] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.424838] ath10k_pci 0001:01:00.0: firmware ver 10.4-ddwrt-9980-tW-13-6284M api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate crc32 037de748
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.481094] ath10k_pci 0001:01:00.0: boot get otp board id result 0x00008400 board_id 1 chip_id 1 ext_bid_support 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.481143] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=1'
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.490409] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=1'
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.500466] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:1 crc32 792a3d38
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.529226] ath10k_pci 0001:01:00.0: boot already acquired valid otp board id,skip download, board_id 1 chip_id 1
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.549686] ath10k_pci 0001:01:00.0: boot upload otp to 0x1234 len 9477
Dec 31 18:00:14 EA8500 kern.info kernel: [ 11.599527] ath10k_pci 0001:01:00.0: Init Max Stations to 64
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 11.670020] ath10k_pci 0001:01:00.0: wmi debug print truncated: 128
Dec 31 18:00:14 EA8500 kern.info kernel: [ 11.670051] ath10k_pci 0001:01:00.0: ChipType 1200 ChipTypeID 0 BoardID 2 P 80/80 V 16 K 160 PH 272 T 282 msdu-desc: 2500 sw-crypt: 0 c
Dec 31 18:00:14 EA8500 kern.info kernel: [ 11.675197] ath10k_pci 0001:01:00.0: free: 24820 iram: 34016 sram: 18196
Dec 31 18:00:14 EA8500 kern.info kernel: [ 11.687678] ath10k_pci 0001:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr c0:56:27:08:b2:92 status 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 11.724701] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 64 raw 0 hwcrypto 1
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 11.827322] ath: EEPROM regdomain sanitized
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 11.827335] ath: EEPROM regdomain: 0x64
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 11.827343] ath: EEPROM indicates we should expect a direct regpair map
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 11.827363] ath: Country alpha2 being used: 00
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 11.827371] ath: Regpair used: 0x64
Dec 31 18:00:14 EA8500 kern.info kernel: [ 11.827463] initialize fq_codel with 33554432 bytes memory limit
Dec 31 18:00:14 EA8500 kern.info kernel: [ 11.827737] ieee80211_txq_setup_flows: set limit to 33554432 bytes
Dec 31 18:00:14 EA8500 kern.info kernel: [ 13.130391] dwmac1000: Master AXI performs any burst length
Dec 31 18:00:14 EA8500 kern.info kernel: [ 13.130458] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 13.135041] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
Dec 31 18:00:14 EA8500 kern.info kernel: [ 13.262604] dwmac1000: Master AXI performs any burst length
Dec 31 18:00:14 EA8500 kern.info kernel: [ 13.262645] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 13.267108] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.169132] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
Dec 31 18:00:14 EA8500 daemon.info smartd[888]: smartd 7.2 2020-12-30 r5155 [armv7l-linux-4.9.285] (local build)
Dec 31 18:00:14 EA8500 daemon.info smartd[888]: Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
Dec 31 18:00:14 EA8500 daemon.info smartd[888]: Opened configuration file /usr/etc/smartd.conf
Dec 31 18:00:14 EA8500 daemon.info smartd[888]: Drive: DEVICESCAN, implied '-a' Directive on line 32 of file /usr/etc/smartd.conf
Dec 31 18:00:14 EA8500 daemon.info smartd[888]: Configuration file /usr/etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Dec 31 18:00:14 EA8500 daemon.crit smartd[888]: In the system's table of devices NO devices found to scan
Dec 31 18:00:14 EA8500 daemon.info smartd[888]: Unable to monitor any SMART enabled devices. Try debug (-d) option. Exiting...
Dec 31 18:00:14 EA8500 user.info : [resetbutton] : resetbutton daemon successfully started
Dec 31 18:00:14 EA8500 user.info : [bridge] : bridge br0 successfully added
Dec 31 18:00:14 EA8500 daemon.info mstpd[764]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
Dec 31 18:00:14 EA8500 daemon.info mstpd[764]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
Dec 31 18:00:14 EA8500 daemon.info mstpd[764]: error, CTL_set_msti_bridge_config: Couldn't find bridge with index 9
Dec 31 18:00:15 EA8500 user.info : [bridge] : interface wlan0 successfully deleted from bridge br0
Dec 31 18:00:15 EA8500 user.info : [bridge] : interface wlan1 successfully deleted from bridge br0
Dec 31 18:00:15 EA8500 user.info : [bridge] : bridge br0 successfully added
Dec 31 18:00:15 EA8500 daemon.info mstpd[764]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.329085] device br0 entered promiscuous mode
Dec 31 18:00:15 EA8500 daemon.info mstpd[764]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
Dec 31 18:00:15 EA8500 user.info : [bridge] : interface vlan1 successfully added to bridge br0
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.395839] br0: port 1(vlan1) entered blocking state
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.395863] br0: port 1(vlan1) entered disabled state
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.400452] device vlan1 entered promiscuous mode
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.405111] device eth0 entered promiscuous mode
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.409940] br0: port 1(vlan1) entered blocking state
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.414489] br0: port 1(vlan1) entered forwarding state
Dec 31 18:00:15 EA8500 user.info : [bridge] : interface vlan2 successfully added to bridge br0
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.452703] br0: port 2(vlan2) entered blocking state
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.452727] br0: port 2(vlan2) entered disabled state
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.456984] device vlan2 entered promiscuous mode
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.461968] br0: port 2(vlan2) entered blocking state
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.466495] br0: port 2(vlan2) entered forwarding state
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.478683] device br0 left promiscuous mode
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.481357] device br0 entered promiscuous mode
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.488471] device br0 left promiscuous mode
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.589399] ath: EEPROM regdomain: 0x8348
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.589405] ath: EEPROM indicates we should expect a country code
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.589412] ath: doing EEPROM country->regdmn map search
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.589418] ath: country maps to regdmn code: 0x3a
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.589422] ath: Country alpha2 being used: US
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.589426] ath: Regpair used: 0x3a
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.589431] ath: regdomain 0x8348 dynamically updated by user
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.589452] ath: EEPROM regdomain: 0x8348
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.589455] ath: EEPROM indicates we should expect a country code
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.589461] ath: doing EEPROM country->regdmn map search
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.589467] ath: country maps to regdmn code: 0x3a
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.589470] ath: Country alpha2 being used: US
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.589474] ath: Regpair used: 0x3a
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.589478] ath: regdomain 0x8348 dynamically updated by user
Dec 31 18:00:15 EA8500 user.info : [hwmon] : successfully started
Dec 31 18:00:15 EA8500 user.info : [klogd] : kernel log daemon successfully stopped
Dec 31 18:00:15 EA8500 kern.notice kernel: klogd: exiting
Dec 31 18:00:15 EA8500 daemon.info smartd[1074]: smartd 7.2 2020-12-30 r5155 [armv7l-linux-4.9.285] (local build)
Dec 31 18:00:15 EA8500 daemon.info smartd[1074]: Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
Dec 31 18:00:15 EA8500 daemon.info smartd[1074]: Opened configuration file /usr/etc/smartd.conf
Dec 31 18:00:15 EA8500 daemon.info smartd[1074]: Drive: DEVICESCAN, implied '-a' Directive on line 32 of file /usr/etc/smartd.conf
Dec 31 18:00:15 EA8500 daemon.info smartd[1074]: Configuration file /usr/etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Dec 31 18:00:15 EA8500 daemon.crit smartd[1074]: In the system's table of devices NO devices found to scan
Dec 31 18:00:15 EA8500 user.info : [syslogd] : syslog daemon successfully stopped
Dec 31 18:00:15 EA8500 daemon.info smartd[1074]: Unable to monitor any SMART enabled devices. Try debug (-d) option. Exiting...
Dec 31 18:00:15 EA8500 syslog.info syslogd exiting
Dec 31 18:00:16 EA8500 syslog.info syslogd started: BusyBox v1.34.0
Dec 31 18:00:16 EA8500 user.info : [klogd] : daemon successfully started
Dec 31 18:00:16 EA8500 kern.notice kernel: klogd started: BusyBox v1.34.0 (2021-10-11 04:15:19 +07)
Dec 31 18:00:16 EA8500 kern.info kernel: [ 16.030036] tun: Universal TUN/TAP device driver, 1.6
Dec 31 18:00:16 EA8500 kern.info kernel: [ 16.030061] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Dec 31 18:00:16 EA8500 user.info : [dropbear] : ssh daemon successfully started
Dec 31 18:00:16 EA8500 authpriv.info dropbear[1111]: Running in background
Dec 31 18:00:16 EA8500 user.info : [cron] : daemon successfully started
Dec 31 18:00:16 EA8500 cron.info cron[1124]: (CRON) STARTUP (fork ok)
Dec 31 18:00:16 EA8500 daemon.warn openvpn[1101]: DEPRECATED OPTION: ncp-disable. Disabling cipher negotiation is a deprecated debug feature that will be removed in OpenVPN 2.6
Dec 31 18:00:16 EA8500 daemon.warn openvpn[1101]: WARNING: Using --management on a TCP port WITHOUT passwords is STRONGLY discouraged and considered insecure
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1101]: OpenVPN 2.5.3 arm-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD] built on Oct 11 2021
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1101]: library versions: OpenSSL 1.1.1l 24 Aug 2021, LZO 2.09
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1169]: MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:14
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1169]: net_route_v4_best_gw query: dst 0.0.0.0
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1169]: net_route_v4_best_gw result: via 10.72.28.13 dev br0
Dec 31 18:00:16 EA8500 daemon.warn openvpn[1169]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1169]: Diffie-Hellman initialized with 2048 bit key
Dec 31 18:00:16 EA8500 daemon.warn openvpn[1169]: WARNING: Your certificate is not yet valid!
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1169]: TUN/TAP device tun2 opened
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1169]: net_iface_mtu_set: mtu 1500 for tun2
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1169]: net_iface_up: set tun2 up
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1169]: net_addr_v4_add: 10.19.92.225/27 dev tun2
Dec 31 18:00:16 EA8500 daemon.warn openvpn[1169]: Could not determine IPv4/IPv6 protocol. Using AF_INET
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1169]: Socket Buffers: R=[262144->262144] S=[262144->262144]
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1169]: UDPv4 link local (bound): [AF_INET][undef]:43210
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1169]: UDPv4 link remote: [AF_UNSPEC]
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1169]: MULTI: multi_init called, r=256 v=256
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1169]: IFCONFIG POOL IPv4: base=10.19.92.226 size=28
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1169]: IFCONFIG POOL LIST
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1169]: Initialization Sequence Completed
Dec 31 18:00:17 EA8500 kern.info kernel: [ 17.295275] ip6_tables: (C) 2000-2006 Netfilter Core Team
Dec 31 18:00:17 EA8500 kern.info kernel: [ 17.314284] Linux kernel CIFS/SMB SERVER 3.4.2 by Namjae Jeon <linkinjeon@kernel.org>
Dec 31 18:00:17 EA8500 user.info wsdd2[1272]: starting.
Dec 31 18:00:17 EA8500 user.info : [smbd] : samba started
Dec 31 18:00:17 EA8500 local5.err ksmbd: [ksmbd-manager/1281]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory
Dec 31 18:00:17 EA8500 local5.info ksmbd: [ksmbd-worker/1283]: INFO: User already exists nobody
Dec 31 18:00:17 EA8500 user.info : [wland] : daemon successfully stopped
Dec 31 18:00:17 EA8500 user.info : [wland] : daemon successfully started
Dec 31 18:00:17 EA8500 daemon.info httpd[1366]: [httpd] : httpd server started at port 80
Dec 31 18:00:17 EA8500 user.info : [httpd] : http daemon successfully started
Dec 31 18:00:18 EA8500 user.info : [process_monitor] : successfully started
Dec 31 18:00:18 EA8500 user.info : [httpd] : daemon successfully stopped
Dec 31 18:00:18 EA8500 daemon.info httpd[1384]: [httpd] : httpd server shutdown
Dec 31 18:00:18 EA8500 daemon.debug ntpclient[1544]: Connecting to 2.pool.ntp.org [74.208.235.60] ...
Oct 22 14:25:16 EA8500 daemon.info ntpclient[1544]: Time set from 2.pool.ntp.org [74.208.235.60].
Oct 22 14:25:16 EA8500 daemon.info process_monitor[1543]: cyclic NTP Update success (servers 2.pool.ntp.org 212.18.3.19 88.99.174.22)
Oct 22 14:25:16 EA8500 daemon.info httpd[1560]: [httpd] : httpd server started at port 80
Oct 22 14:25:16 EA8500 user.info : [httpd] : http daemon successfully started
Oct 22 14:25:16 EA8500 user.info : [resetbutton] : daemon successfully stopped
Oct 22 14:25:16 EA8500 user.info : [resetbutton] : resetbutton daemon successfully started
Oct 22 14:25:16 EA8500 kern.info kernel: [ 19.056914] usbcore: registered new interface driver usbfs
Oct 22 14:25:16 EA8500 kern.info kernel: [ 19.057024] usbcore: registered new interface driver hub
Oct 22 14:25:16 EA8500 kern.info kernel: [ 19.061434] usbcore: registered new device driver usb
Oct 22 14:25:16 EA8500 kern.info kernel: [ 19.113437] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 22 14:25:16 EA8500 kern.info kernel: [ 19.121252] ehci-platform: EHCI generic platform driver
Oct 22 14:25:16 EA8500 kern.info kernel: [ 19.141672] ehci-pci: EHCI PCI platform driver
Oct 22 14:25:16 EA8500 kern.info kernel: [ 19.270557] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 22 14:25:17 EA8500 kern.info kernel: [ 19.688236] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Oct 22 14:25:17 EA8500 kern.info kernel: [ 19.688324] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
Oct 22 14:25:17 EA8500 kern.info kernel: [ 19.692914] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Oct 22 14:25:17 EA8500 kern.info kernel: [ 19.700281] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
Oct 22 14:25:17 EA8500 kern.info kernel: [ 19.710051] hub 1-0:1.0: USB hub found
Oct 22 14:25:17 EA8500 kern.info kernel: [ 19.719223] hub 1-0:1.0: 1 port detected
Oct 22 14:25:17 EA8500 kern.info kernel: [ 19.722936] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Oct 22 14:25:17 EA8500 kern.info kernel: [ 19.722980] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
Oct 22 14:25:17 EA8500 kern.info kernel: [ 19.728773] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Oct 22 14:25:17 EA8500 kern.info kernel: [ 19.737023] hub 2-0:1.0: USB hub found
Oct 22 14:25:17 EA8500 kern.info kernel: [ 19.747327] hub 2-0:1.0: 1 port detected
Oct 22 14:25:17 EA8500 kern.info kernel: [ 19.828591] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Oct 22 14:25:17 EA8500 kern.info kernel: [ 19.828643] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
Oct 22 14:25:17 EA8500 kern.info kernel: [ 19.833241] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Oct 22 14:25:17 EA8500 kern.info kernel: [ 19.840647] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
Oct 22 14:25:17 EA8500 kern.info kernel: [ 19.849875] hub 3-0:1.0: USB hub found
Oct 22 14:25:17 EA8500 kern.info kernel: [ 19.855578] hub 3-0:1.0: 1 port detected
Oct 22 14:25:17 EA8500 kern.info kernel: [ 19.859739] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Oct 22 14:25:17 EA8500 kern.info kernel: [ 19.863168] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
Oct 22 14:25:17 EA8500 kern.info kernel: [ 19.868558] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
Oct 22 14:25:17 EA8500 kern.info kernel: [ 19.876756] hub 4-0:1.0: USB hub found
Oct 22 14:25:17 EA8500 kern.info kernel: [ 19.888148] hub 4-0:1.0: 1 port detected
Oct 22 14:25:17 EA8500 kern.info kernel: [ 20.138994] usb 3-1: new high-speed USB device number 2 using xhci-hcd
Oct 22 14:25:17 EA8500 kern.info kernel: [ 20.288938] usb 1-1: new high-speed USB device number 2 using xhci-hcd
Oct 22 14:25:17 EA8500 daemon.debug process_monitor[1543]: Restarting cron (time sync change)
Oct 22 14:25:18 EA8500 user.info : [cron] : daemon successfully stopped
Oct 22 14:25:18 EA8500 user.info : [cron] : daemon successfully started
Oct 22 14:25:18 EA8500 cron.info cron[1945]: (CRON) STARTUP (fork ok)
Oct 22 14:25:18 EA8500 user.info : [process_monitor] : daemon successfully stopped
Oct 22 14:25:18 EA8500 daemon.info process_monitor[1543]: [process_monitor] : cleanup timers
Oct 22 14:25:18 EA8500 daemon.debug process_monitor[1950]: We need to re-update after 3600 seconds
Oct 22 14:25:18 EA8500 daemon.info process_monitor[1950]: [process_monitor] : set timer: 3600 seconds, callback: ntp_main()
Oct 22 14:25:18 EA8500 user.info : [process_monitor] : successfully started
Oct 22 14:25:18 EA8500 kern.info kernel: [ 21.229172] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
Oct 22 14:25:22 EA8500 kern.info kernel: [ 24.948352] xhci-hcd xhci-hcd.1.auto: remove, state 1
Oct 22 14:25:22 EA8500 kern.info kernel: [ 24.948393] usb usb4: USB disconnect, device number 1
Oct 22 14:25:22 EA8500 kern.info kernel: [ 24.953410] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered
Oct 22 14:25:22 EA8500 kern.info kernel: [ 24.957628] xhci-hcd xhci-hcd.1.auto: remove, state 1
Oct 22 14:25:22 EA8500 kern.info kernel: [ 24.963261] usb usb3: USB disconnect, device number 1
Oct 22 14:25:22 EA8500 kern.info kernel: [ 24.968091] usb 3-1: USB disconnect, device number 2
Oct 22 14:25:22 EA8500 kern.info kernel: [ 24.978691] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered
Oct 22 14:25:22 EA8500 kern.info kernel: [ 24.979469] xhci-hcd xhci-hcd.0.auto: remove, state 1
Oct 22 14:25:22 EA8500 kern.info kernel: [ 24.983821] usb usb2: USB disconnect, device number 1
Oct 22 14:25:22 EA8500 kern.info kernel: [ 24.988753] usb 2-1: USB disconnect, device number 2
Oct 22 14:25:22 EA8500 kern.info kernel: [ 25.000509] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
Oct 22 14:25:22 EA8500 kern.info kernel: [ 25.000710] xhci-hcd xhci-hcd.0.auto: remove, state 1
Oct 22 14:25:22 EA8500 kern.info kernel: [ 25.005249] usb usb1: USB disconnect, device number 1
Oct 22 14:25:22 EA8500 kern.info kernel: [ 25.012187] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
Oct 22 14:25:22 EA8500 kern.info kernel: [ 25.057130] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Oct 22 14:25:22 EA8500 kern.info kernel: [ 25.057218] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
Oct 22 14:25:22 EA8500 kern.info kernel: [ 25.061739] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Oct 22 14:25:22 EA8500 kern.info kernel: [ 25.069156] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
Oct 22 14:25:22 EA8500 kern.info kernel: [ 25.078325] hub 1-0:1.0: USB hub found
Oct 22 14:25:22 EA8500 kern.info kernel: [ 25.084382] hub 1-0:1.0: 1 port detected
Oct 22 14:25:22 EA8500 kern.info kernel: [ 25.087945] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Oct 22 14:25:22 EA8500 kern.info kernel: [ 25.091750] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
Oct 22 14:25:22 EA8500 kern.info kernel: [ 25.097039] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Oct 22 14:25:22 EA8500 kern.info kernel: [ 25.105141] hub 2-0:1.0: USB hub found
Oct 22 14:25:22 EA8500 kern.info kernel: [ 25.113002] hub 2-0:1.0: 1 port detected
Oct 22 14:25:22 EA8500 kern.info kernel: [ 25.116805] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Oct 22 14:25:22 EA8500 kern.info kernel: [ 25.120571] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
Oct 22 14:25:22 EA8500 kern.info kernel: [ 25.125912] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Oct 22 14:25:22 EA8500 kern.info kernel: [ 25.133399] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
Oct 22 14:25:22 EA8500 kern.info kernel: [ 25.142838] hub 3-0:1.0: USB hub found
Oct 22 14:25:22 EA8500 kern.info kernel: [ 25.148268] hub 3-0:1.0: 1 port detected
Oct 22 14:25:22 EA8500 kern.info kernel: [ 25.152272] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Oct 22 14:25:22 EA8500 kern.info kernel: [ 25.155886] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
Oct 22 14:25:22 EA8500 kern.info kernel: [ 25.161326] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
Oct 22 14:25:22 EA8500 kern.info kernel: [ 25.169441] hub 4-0:1.0: USB hub found
Oct 22 14:25:22 EA8500 kern.info kernel: [ 25.177299] hub 4-0:1.0: 1 port detected
Oct 22 14:25:22 EA8500 kern.notice kernel: [ 25.217600] SCSI subsystem initialized
Oct 22 14:25:22 EA8500 kern.info kernel: [ 25.334624] usbcore: registered new interface driver usb-storage
Oct 22 14:25:22 EA8500 kern.debug kernel: [ 25.392808] libata version 3.00 loaded.
Oct 22 14:25:23 EA8500 kern.info kernel: [ 25.450680] usb 3-1: new high-speed USB device number 2 using xhci-hcd
Oct 22 14:25:23 EA8500 kern.info kernel: [ 25.460112] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
Oct 22 14:25:23 EA8500 kern.info kernel: [ 25.460165] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
Oct 22 14:25:23 EA8500 kern.info kernel: [ 25.464489] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
Oct 22 14:25:23 EA8500 kern.info kernel: [ 25.474373] scsi host0: ahci
Oct 22 14:25:23 EA8500 kern.info kernel: [ 25.481617] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 95
Oct 22 14:25:23 EA8500 kern.info kernel: [ 25.518992] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
Oct 22 14:25:23 EA8500 kern.info kernel: [ 25.540890] usb-storage 2-1:1.0: USB Mass Storage device detected
Oct 22 14:25:23 EA8500 kern.info kernel: [ 25.541062] usb-storage 2-1:1.0: Quirks match for vid 090c pid 1000: 400
Oct 22 14:25:23 EA8500 kern.info kernel: [ 25.546036] scsi host1: usb-storage 2-1:1.0
Oct 22 14:25:23 EA8500 kern.info kernel: [ 25.609855] usb-storage 3-1:1.0: USB Mass Storage device detected
Oct 22 14:25:23 EA8500 kern.info kernel: [ 25.610608] scsi host2: usb-storage 3-1:1.0
Oct 22 14:25:23 EA8500 kern.info kernel: [ 25.820499] ata1: SATA link down (SStatus 0 SControl 300)
Oct 22 14:25:23 EA8500 kern.info kernel: [ 25.982790] sdhci: Secure Digital Host Controller Interface driver
Oct 22 14:25:23 EA8500 kern.info kernel: [ 25.982817] sdhci: Copyright(c) Pierre Ossman
Oct 22 14:25:23 EA8500 kern.info kernel: [ 25.995872] sdhci-pltfm: SDHCI platform and OF driver helper
Oct 22 14:25:24 EA8500 kern.notice kernel: [ 26.659877] scsi 2:0:0:0: Direct-Access USB Flash Drive 1.00 PQ: 0 ANSI: 6
Oct 22 14:25:24 EA8500 kern.notice kernel: [ 26.756004] scsi 1:0:0:0: Direct-Access Samsung Flash Drive 1100 PQ: 0 ANSI: 6
Oct 22 14:25:24 EA8500 kern.notice kernel: [ 26.758206] sd 2:0:0:0: [sdb] 30629376 512-byte logical blocks: (15.7 GB/14.6 GiB)
Oct 22 14:25:24 EA8500 kern.notice kernel: [ 26.763243] sd 1:0:0:0: [sda] 62656641 512-byte logical blocks: (32.1 GB/29.9 GiB)
Oct 22 14:25:24 EA8500 kern.notice kernel: [ 26.763647] sd 1:0:0:0: [sda] Write Protect is off
Oct 22 14:25:24 EA8500 kern.debug kernel: [ 26.763654] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
Oct 22 14:25:24 EA8500 kern.notice kernel: [ 26.763824] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 22 14:25:24 EA8500 kern.notice kernel: [ 26.784010] sd 2:0:0:0: [sdb] Write Protect is off
Oct 22 14:25:24 EA8500 kern.debug kernel: [ 26.791868] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
Oct 22 14:25:24 EA8500 kern.notice kernel: [ 26.792355] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Oct 22 14:25:24 EA8500 kern.info kernel: [ 26.799704] sdb: sdb1
Oct 22 14:25:24 EA8500 kern.notice kernel: [ 26.808079] sd 2:0:0:0: [sdb] Attached SCSI removable disk
Oct 22 14:25:24 EA8500 user.info : [cron] : daemon successfully stopped
Oct 22 14:25:24 EA8500 user.info : [wsdd2] : windows service discovery daemon successfully stopped
Oct 22 14:25:24 EA8500 user.err wsdd2[1272]: Terminated received.
Oct 22 14:25:24 EA8500 user.info wsdd2[1272]: terminating.
Oct 22 14:25:24 EA8500 user.info : [ksmbd.mountd] : samba daemon successfully stopped
Oct 22 14:25:24 EA8500 local5.info ksmbd: [ksmbd-worker/1283]: INFO: Child received signal: 15 (Terminated)
Oct 22 14:25:24 EA8500 local5.err ksmbd: [ksmbd-manager/1281]: ERROR: WARNING: child process exited abnormally: 1283
Oct 22 14:25:24 EA8500 local5.err ksmbd: [ksmbd-manager/1281]: ERROR: can't execute kill 1283: No such process
Oct 22 14:25:24 EA8500 local5.info ksmbd: [ksmbd-manager/1281]: INFO: Exiting. Bye!
Oct 22 14:25:24 EA8500 kern.info kernel: [ 26.890790] ksmbd: kill command received
Oct 22 14:25:24 EA8500 kern.info kernel: [ 26.987157] sda: sda1
Oct 22 14:25:24 EA8500 kern.notice kernel: [ 26.995061] sd 1:0:0:0: [sda] Attached SCSI removable disk
Oct 22 14:25:25 EA8500 user.info : [cron] : daemon successfully started
Oct 22 14:25:25 EA8500 cron.info cron[2197]: (CRON) STARTUP (fork ok)
Oct 22 14:25:25 EA8500 kern.warn kernel: [ 27.716856] EXT4-fs (sda1): Ignoring removed nobh option
Oct 22 14:25:25 EA8500 kern.info kernel: [ 27.720408] EXT4-fs (sda1): barriers disabled
Oct 22 14:25:25 EA8500 kern.info kernel: [ 27.724666] EXT4-fs (sda1): recovery complete
Oct 22 14:25:25 EA8500 kern.info kernel: [ 27.725494] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: init_itable=0,nobarrier,nobh,barrier=0
Oct 22 14:25:25 EA8500 user.info : [cron] : daemon successfully stopped
Oct 22 14:25:25 EA8500 user.info : [cron] : daemon successfully started
Oct 22 14:25:25 EA8500 cron.info cron[2259]: (CRON) STARTUP (fork ok)
Oct 22 14:25:25 EA8500 user.info : [cron] : daemon successfully stopped
Oct 22 14:25:25 EA8500 user.info : [cron] : daemon successfully started
Oct 22 14:25:25 EA8500 kern.warn kernel: [ 27.912766] EXT4-fs (sdb1): Ignoring removed nobh option
Oct 22 14:25:25 EA8500 kern.info kernel: [ 27.918966] EXT4-fs (sdb1): barriers disabled
Oct 22 14:25:25 EA8500 cron.info cron[2279]: (CRON) STARTUP (fork ok)
Oct 22 14:25:25 EA8500 cron.info cron[2279]: (crontabs) ORPHAN (no passwd entry)
Oct 22 14:25:25 EA8500 kern.info kernel: [ 27.942855] EXT4-fs (sdb1): recovery complete
Oct 22 14:25:25 EA8500 kern.info kernel: [ 27.942884] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: init_itable=0,nobarrier,nobh,barrier=0
Oct 22 14:25:25 EA8500 user.info : [cron] : daemon successfully stopped
Oct 22 14:25:25 EA8500 user.info : [cron] : daemon successfully started
Oct 22 14:25:25 EA8500 cron.info cron[2323]: (CRON) STARTUP (fork ok)
Oct 22 14:25:26 EA8500 kern.info kernel: [ 28.405020] Linux kernel CIFS/SMB SERVER 3.4.2 by Namjae Jeon <linkinjeon@kernel.org>
Oct 22 14:25:26 EA8500 user.info wsdd2[2399]: starting.
Oct 22 14:25:26 EA8500 user.info : [smbd] : samba started
Oct 22 14:25:26 EA8500 local5.info ksmbd: [ksmbd-worker/2406]: INFO: User already exists nobody
Oct 22 14:25:26 EA8500 user.info : [smbd] : samba started
Oct 22 14:25:26 EA8500 user.info wsdd2[2500]: starting.
Oct 22 14:25:26 EA8500 local5.info ksmbd: [ksmbd-manager/2506]: INFO: File '/tmp/ksmbd.lock' belongs to pid 2403
Oct 22 14:25:26 EA8500 local5.err ksmbd: [ksmbd-manager/2506]: ERROR: Failed to create lock file: File exists
Oct 22 14:25:26 EA8500 local5.info ksmbd: [ksmbd-manager/2506]: INFO: Exiting. Bye!
Oct 22 14:25:26 EA8500 user.info : [smbd] : samba started
Oct 22 14:25:26 EA8500 user.info wsdd2[2507]: starting.
Oct 22 14:25:26 EA8500 local5.info ksmbd: [ksmbd-manager/2513]: INFO: File '/tmp/ksmbd.lock' belongs to pid 2403
Oct 22 14:25:26 EA8500 local5.err ksmbd: [ksmbd-manager/2513]: ERROR: Failed to create lock file: File exists
Oct 22 14:25:26 EA8500 local5.info ksmbd: [ksmbd-manager/2513]: INFO: Exiting. Bye!
Oct 22 14:25:26 EA8500 user.info : [smbd] : samba started
Oct 22 14:25:26 EA8500 user.info wsdd2[2528]: starting.
Oct 22 14:25:26 EA8500 local5.info ksmbd: [ksmbd-manager/2533]: INFO: File '/tmp/ksmbd.lock' belongs to pid 2403
Oct 22 14:25:26 EA8500 local5.err ksmbd: [ksmbd-manager/2533]: ERROR: Failed to create lock file: File exists
Oct 22 14:25:26 EA8500 local5.info ksmbd: [ksmbd-manager/2533]: INFO: Exiting. Bye!
Oct 22 14:26:12 EA8500 daemon.info httpd[1568]: [httpd] : Authentication fail
Oct 22 14:26:12 EA8500 daemon.err httpd[1568]: [httpd] : Request Error Code 401: Authorization required. Wrong username and/or password!
Oct 22 14:45:14 EA8500 authpriv.info dropbear[2675]: Child connection from 10.72.28.3:35748
Oct 22 14:45:14 EA8500 authpriv.notice dropbear[2675]: Pubkey auth succeeded for 'root' with key md5 02:dd:6e:8e:c8:bb:bc:e9:23:24:92:0d:ea:2c:7b:17 from 10.72.28.3:35748
root@EA8500:~# uptime && date
14:46:25 up 21 min, load average: 0.00, 0.00, 0.00
Fri Oct 22 14:46:25 CDT 2021
root@EA8500:~#
Connection to ea8500.mrjcd.com closed.
mrjcd@daDeb:~$ neofetch
_,met$$$$$gg. mrjcd@daDeb
,g$$$$$$$$$$$$$$$P. -----------
,g$$P" """Y$$.". OS: Debian GNU/Linux bookworm/sid x86_64
,$$P' `$$$. Host: OptiPlex 7010 01
',$$P ,ggs. `$$b: Kernel: 5.14.0-2-amd64
`d$$' ,$P"' . $$$ Uptime: 1 day, 6 hours, 41 mins
$$P d$' , $$P Packages: 2096 (dpkg)
$$: $$. - ,d$$' Shell: bash 5.1.8
$$; Y$b._ _,d$P' Resolution: 1920x1080
Y$$. `.`"Y$$$$P"' DE: GNOME 41.0
`$$b "-.__ WM: Mutter
`Y$$ WM Theme: Adwaita
`Y$$. Theme: Adwaita [GTK2/3]
`$$b. Icons: gnome [GTK2/3]
`Y$$b. Terminal: gnome-terminal
`"Y$b._ CPU: Intel i5-3570 (4) @ 3.800GHz
`""" GPU: Intel HD Graphics
Memory: 10036MiB / 15894MiB
mrjcd@daDeb:~$