Linksys EA8500
DD-WRT v3.0-r40932 std (09/07/19)
Linux 4.9.191 #466 SMP Sat Sep 7 02:18:00 CEST 2019 armv7l
GUI install over r40912.
All working ok for me. :')
Still on HFSC CAKE 51/51 all 'TCP-Packet Priority' enabled
all tests below done from laptop on 2.4 GHz
mrjcd@Will-Be-Was:~$ speedtest-cli --share
Retrieving speedtest.net configuration...
Testing from Brazos Internet (96.46.208.xxx)...
Retrieving speedtest.net server list...
Selecting best server based on ping...
Hosted by pinnacle network solutions (Wichita Falls, TX) [88.91 km]: 50.995 ms
Testing download speed................................................................................
Download: 45.54 Mbit/s
Testing upload speed......................................................................................................
Upload: 44.66 Mbit/s
Share results: http://www.speedtest.net/result/8569500287.png
mrjcd@Will-Be-Was:~$
mrjcd@Will-Be-Was:~$ speedtest-cli --share --server 5420
Retrieving speedtest.net configuration...
Testing from Brazos Internet (96.46.208.xxx)...
Retrieving speedtest.net server list...
Retrieving information for the selected server...
Hosted by Suddenlink Communications LLC (Abilene, TX) [130.81 km]: 39.89 ms
Testing download speed................................................................................
Download: 46.84 Mbit/s
Testing upload speed......................................................................................................
Upload: 45.51 Mbit/s
Share results: http://www.speedtest.net/result/8569504314.png
mrjcd@Will-Be-Was:~$
#
Netgear WNDR3700 V4
DD-WRT v3.0-r40932 std (09/07/19)
Linux 3.18.140 #53193 Sat Sep 7 04:05:22 +04 2019 mips
GUI install over r40912.
Everything working very good.
#
Linksys WRT160NL
DD-WRT v3.0-r40932 std (09/07/19)
Linux 3.10.108-d8 #21362 Sat Sep 7 02:24:56 +04 2019 mips
GUI install over r40912 and webif came back just fine.
Everything working and did NOT require reboot --
However ...the Load Average stayed pegged-out until I did reboot and then all back to normal :')
mrjcd@Deb:~$ ssh root@160nl-switch.mrjcd.com
DD-WRT v3.0-r40932 std (c) 2019 NewMedia-NET GmbH
Release: 09/07/19
Board: Linksys WRT160NL
==========================================================
___ ___ _ _____ ______ ____ ___
/ _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \
/ // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // /
/____/____/ |__/|__/_/|_| /_/ |___/____(_)___/
DD-WRT v3.0
http://www.dd-wrt.com
==========================================================
BusyBox v1.31.0 (2019-09-07 02:25:16 +04) built-in shell (ash)
root@160nl-switch:~# dmesg
<5>[ 0.000000] Linux version 3.10.108-d8 (root@linux) (gcc version 9.2.0 (OpenWrt GCC 9.2.0 r10890-7d542dc804) ) #21362 Sat Sep 7 02:24:56 +04 2019
<4>[ 0.000000] flash_size passed from bootloader = 8
<6>[ 0.000000] bootconsole [early0] enabled
<6>[ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
<6>[ 0.000000] booting platform Atheros AR9130 rev 2 (0xb8)
<6>[ 0.000000] Determined physical RAM map:
<6>[ 0.000000] memory: 02000000 @ 00000000 (usable)
<4>[ 0.000000] Zone ranges:
<4>[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
<4>[ 0.000000] Movable zone start for each node
<4>[ 0.000000] Early memory node ranges
<4>[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
<7>[ 0.000000] On node 0 totalpages: 8192
<7>[ 0.000000] free_area_init_node: node 0, pgdat 802f6f80, node_mem_map 81000000
<7>[ 0.000000] Normal zone: 64 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 8192 pages, LIFO batch:0
<4>[ 0.000000] Primary instruction cache 64kB, 4-way, VIPT, I-cache aliases, linesize 32 bytes.
<4>[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
<7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>[ 0.000000] pcpu-alloc: [0] 0
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
<5>[ 0.000000] Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd init=/sbin/init
<6>[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.000000] Writing ErrCtl register=00000000
<6>[ 0.000000] Readback ErrCtl register=00000000
<6>[ 0.000000] Memory: 28968k/32768k available (2331k kernel code, 3800k reserved, 401k data, 208k init, 0k highmem)
<6>[ 0.000000] NR_IRQS:83
<0>[ 0.000000] irq init done
<4>[ 0.000000] plat_time_init: plat time init done
<6>[ 0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
<6>[ 0.080000] pid_max: default: 32768 minimum: 301
<6>[ 0.080000] Mount-cache hash table entries: 512
<6>[ 0.090000] NET: Registered protocol family 16
<4>[ 0.100000] Can't analyze schedule() prologue at 80066e08
<6>[ 0.120000] bio: create slab <bio-0> at 0
<5>[ 0.130000] SCSI subsystem initialized
<6>[ 0.130000] usbcore: registered new interface driver usbfs
<6>[ 0.140000] usbcore: registered new interface driver hub
<6>[ 0.140000] usbcore: registered new device driver usb
<6>[ 0.150000] Switching to clocksource MIPS
<6>[ 0.150000] NET: Registered protocol family 2
<6>[ 0.160000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
<6>[ 0.160000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
<6>[ 0.170000] TCP: Hash tables configured (established 512 bind 512)
<6>[ 0.170000] TCP: reno registered
<6>[ 0.180000] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.180000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.190000] NET: Registered protocol family 1
<5>[ 0.190000] gpio_proc: module loaded and /proc/gpio/ created
<6>[ 0.200000] Register LED Device
<5>[ 0.200000] wl0gpio_proc: module loaded and /proc/wl0gpio/ created
<4>[ 0.210000] AR7100 GPIOC major 0
<6>[ 0.210000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 0.220000] msgmni has been set to 56
<6>[ 0.230000] io scheduler noop registered
<6>[ 0.230000] io scheduler deadline registered (default)
<6>[ 0.230000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
<6>[ 0.260000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 19) is a 16550A
<6>[ 0.270000] console [ttyS0] enabled, bootconsole disabled
<0>[ 0.280000] guessed flashsize = 8M
<0>[ 0.290000] scanning for root partition
<0>[ 0.290000] WRT160NL/E2100L uboot detected
<0>[ 0.290000] bootloader size = 40000
<0>[ 0.300000]
<0>[ 0.300000] found squashfs at 192000
<5>[ 0.310000] Creating 8 MTD partitions on "ar7100-nor0":
<5>[ 0.310000] 0x000000000000-0x000000040000 : "RedBoot"
<5>[ 0.320000] 0x000000040000-0x0000007e0000 : "linux"
<5>[ 0.330000] 0x000000192000-0x0000007a0000 : "rootfs"
<4>[ 0.330000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
<5>[ 0.350000] mtd: partition "rootfs" set to be root filesystem
<5>[ 0.350000] 0x0000007a0000-0x0000007e0000 : "ddwrt"
<5>[ 0.360000] 0x0000007e0000-0x0000007f0000 : "nvram"
<5>[ 0.360000] 0x0000007f0000-0x000000800000 : "FIS directory"
<5>[ 0.370000] 0x0000007f0000-0x000000800000 : "board_config"
<5>[ 0.380000] 0x000000000000-0x000000800000 : "fullflash"
<4>[ 0.390000] ->Oops: flash id 0xc22017 .
<6>[ 0.790000] PPP generic driver version 2.4.2
<6>[ 0.790000] PPP BSD Compression module registered
<6>[ 0.800000] PPP Deflate Compression module registered
<6>[ 0.800000] PPP MPPE Compression module registered
<6>[ 0.810000] NET: Registered protocol family 24
<6>[ 0.810000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 0.850000] ar71xx-ehci ar71xx-ehci.0: Atheros AR91xx built-in EHCI controller
<6>[ 0.860000] ar71xx-ehci ar71xx-ehci.0: new USB bus registered, assigned bus number 1
<6>[ 0.900000] ar71xx-ehci ar71xx-ehci.0: irq 3, io mem 0x1b000000
<6>[ 0.920000] ar71xx-ehci ar71xx-ehci.0: USB 2.0 started, EHCI 1.00
<6>[ 0.920000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 0.930000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 0.940000] usb usb1: Product: Atheros AR91xx built-in EHCI controller
<6>[ 0.940000] usb usb1: Manufacturer: Linux 3.10.108-d8 ehci_hcd
<6>[ 0.950000] usb usb1: SerialNumber: platform
<6>[ 0.950000] hub 1-0:1.0: USB hub found
<6>[ 0.960000] hub 1-0:1.0: 1 port detected
<6>[ 0.970000] u32 classifier
<6>[ 0.970000] Performance counters on
<6>[ 0.980000] input device check on
<6>[ 0.980000] Actions configured
<6>[ 0.990000] Netfilter messages via NETLINK v0.30.
<6>[ 0.990000] nf_conntrack version 0.5.0 (452 buckets, 1808 max)
<4>[ 1.000000] nf_conntrack_rtsp v0.7 loading
<4>[ 1.000000] nf_nat_rtsp v0.7 loading
<6>[ 1.010000] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 1.010000] TCP: westwood registered
<6>[ 1.010000] TCP: hybla registered
<6>[ 1.020000] TCP: vegas registered
<6>[ 1.020000] NET: Registered protocol family 17
<5>[ 1.030000] Bridge firewalling registered
<6>[ 1.030000] 8021q: 802.1Q VLAN Support v1.8
<6>[ 1.040000] searching for nvram
<6>[ 1.040000] nvram size = 65536
<6>[ 1.070000] Atheros AR71xx hardware watchdog driver version 0.1.0
<6>[ 1.080000] ar71xx-wdt: timeout=15 secs (max=21) ref freq=200000000
<6>[ 1.090000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
<6>[ 1.100000] Freeing unused kernel memory: 208K
<6>[ 1.340000] usb 1-1: new high-speed USB device number 2 using ar71xx-ehci
<6>[ 1.770000] usb 1-1: New USB device found, idVendor=058f, idProduct=6387
<6>[ 1.770000] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[ 1.780000] usb 1-1: Product: Mass Storage
<6>[ 1.790000] usb 1-1: Manufacturer: Generic
<6>[ 1.790000] usb 1-1: SerialNumber: 1DF77398
<7>[ 4.710000] ar71xx-wdt: enabling watchdog timer
<6>[ 4.800000] libphy: ag71xx_mdio: probed
<6>[ 5.130000] Registering RTL8306SD switch with Chip ID: 0x5988, version: 0x0000
<6>[ 5.130000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=00008306, driver=Realtek RTL8306S]
<6>[ 5.140000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RMII
<6>[ 5.470000] ag71xx ag71xx.1: connected to PHY at ag71xx-mdio.0:04 [uid=00008306, driver=Realtek RTL8306S]
<6>[ 5.480000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:RMII
<6>[ 5.660000] Loading modules backported from Linux version wireless-drivers-next-for-davem-2017-09-01-0-geb464d4a8d09
<6>[ 5.670000] Backport generated by backports.git backports-20160324-111-g97b8d7c4
<7>[ 6.530000] ath: EEPROM regdomain: 0x0
<7>[ 6.530000] ath: EEPROM indicates default country code should be used
<7>[ 6.530000] ath: doing EEPROM country->regdmn map search
<7>[ 6.530000] ath: country maps to regdmn code: 0x3a
<7>[ 6.530000] ath: Country alpha2 being used: US
<7>[ 6.530000] ath: Regpair used: 0x3a
<7>[ 6.560000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
<6>[ 6.570000] ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2122 RF Rev:a2 mem=0xb80c0000, irq=2
<7>[ 7.140000] ar71xx: pll_reg 0xb8050014: 0x13000a44
<6>[ 7.140000] eth0: link up (100Mbps/Full duplex)
<6>[ 7.780000] usb-storage 1-1:1.0: USB Mass Storage device detected
<6>[ 7.780000] scsi0 : usb-storage 1-1:1.0
<6>[ 7.790000] usbcore: registered new interface driver usb-storage
<5>[ 8.790000] scsi 0:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4
<5>[ 8.800000] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[ 8.810000] sd 0:0:0:0: [sda] 31457280 512-byte logical blocks: (16.1 GB/15.0 GiB)
<5>[ 8.820000] sd 0:0:0:0: [sda] Write Protect is off
<7>[ 8.820000] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
<5>[ 8.820000] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
<6>[ 8.840000] sda: sda1
<5>[ 8.850000] sd 0:0:0:0: [sda] Attached SCSI removable disk
<6>[ 9.650000] device br0 entered promiscuous mode
<6>[ 9.680000] eth0: link down
<6>[ 9.850000] device eth0 entered promiscuous mode
<6>[ 10.020000] device eth1 entered promiscuous mode
<6>[ 10.040000] br0: port 1(eth0) entered forwarding state
<6>[ 10.050000] br0: port 1(eth0) entered forwarding state
<6>[ 10.050000] device br0 left promiscuous mode
<6>[ 10.060000] device br0 entered promiscuous mode
<6>[ 10.110000] device br0 left promiscuous mode
<7>[ 10.150000] ar71xx: pll_reg 0xb8050014: 0x13000a44
<6>[ 10.150000] eth0: link up (100Mbps/Full duplex)
<7>[ 10.270000] ath: EEPROM regdomain: 0x8348
<7>[ 10.270000] ath: EEPROM indicates we should expect a country code
<7>[ 10.270000] ath: doing EEPROM country->regdmn map search
<7>[ 10.270000] ath: country maps to regdmn code: 0x3a
<7>[ 10.270000] ath: Country alpha2 being used: US
<7>[ 10.270000] ath: Regpair used: 0x3a
<7>[ 10.270000] ath: regdomain 0x8348 dynamically updated by user
<4>[ 10.640000] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
<4>[ 10.660000] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
<6>[ 17.010000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
<6>[ 25.080000] br0: port 1(eth0) entered forwarding state
root@160nl-switch:~# uptime
17:58:18 up 4 min, load average: 2.10, 1.28, 0.55
root@160nl-switch:~# date
Fri Sep 6 17:58:29 CDT 2019
root@160nl-switch:~# reboot
root@160nl-switch:~# Connection to 160nl-switch.mrjcd.com closed by remote host.
Connection to 160nl-switch.mrjcd.com closed.
mrjcd@Deb:~$ ssh root@160nl-switch.mrjcd.com
DD-WRT v3.0-r40932 std (c) 2019 NewMedia-NET GmbH
Release: 09/07/19
Board: Linksys WRT160NL
==========================================================
___ ___ _ _____ ______ ____ ___
/ _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \
/ // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // /
/____/____/ |__/|__/_/|_| /_/ |___/____(_)___/
DD-WRT v3.0
http://www.dd-wrt.com
==========================================================
BusyBox v1.31.0 (2019-09-07 02:25:16 +04) built-in shell (ash)
root@160nl-switch:~# dmesg
<5>[ 0.000000] Linux version 3.10.108-d8 (root@linux) (gcc version 9.2.0 (OpenWrt GCC 9.2.0 r10890-7d542dc804) ) #21362 Sat Sep 7 02:24:56 +04 2019
<4>[ 0.000000] flash_size passed from bootloader = 8
<6>[ 0.000000] bootconsole [early0] enabled
<6>[ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
<6>[ 0.000000] booting platform Atheros AR9130 rev 2 (0xb8)
<6>[ 0.000000] Determined physical RAM map:
<6>[ 0.000000] memory: 02000000 @ 00000000 (usable)
<4>[ 0.000000] Zone ranges:
<4>[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
<4>[ 0.000000] Movable zone start for each node
<4>[ 0.000000] Early memory node ranges
<4>[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
<7>[ 0.000000] On node 0 totalpages: 8192
<7>[ 0.000000] free_area_init_node: node 0, pgdat 802f6f80, node_mem_map 81000000
<7>[ 0.000000] Normal zone: 64 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 8192 pages, LIFO batch:0
<4>[ 0.000000] Primary instruction cache 64kB, 4-way, VIPT, I-cache aliases, linesize 32 bytes.
<4>[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
<7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>[ 0.000000] pcpu-alloc: [0] 0
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
<5>[ 0.000000] Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd init=/sbin/init
<6>[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.000000] Writing ErrCtl register=00000000
<6>[ 0.000000] Readback ErrCtl register=00000000
<6>[ 0.000000] Memory: 28968k/32768k available (2331k kernel code, 3800k reserved, 401k data, 208k init, 0k highmem)
<6>[ 0.000000] NR_IRQS:83
<0>[ 0.000000] irq init done
<4>[ 0.000000] plat_time_init: plat time init done
<6>[ 0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
<6>[ 0.080000] pid_max: default: 32768 minimum: 301
<6>[ 0.080000] Mount-cache hash table entries: 512
<6>[ 0.090000] NET: Registered protocol family 16
<4>[ 0.100000] Can't analyze schedule() prologue at 80066e08
<6>[ 0.120000] bio: create slab <bio-0> at 0
<5>[ 0.130000] SCSI subsystem initialized
<6>[ 0.130000] usbcore: registered new interface driver usbfs
<6>[ 0.140000] usbcore: registered new interface driver hub
<6>[ 0.140000] usbcore: registered new device driver usb
<6>[ 0.150000] Switching to clocksource MIPS
<6>[ 0.150000] NET: Registered protocol family 2
<6>[ 0.160000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
<6>[ 0.160000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
<6>[ 0.170000] TCP: Hash tables configured (established 512 bind 512)
<6>[ 0.170000] TCP: reno registered
<6>[ 0.180000] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.180000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.190000] NET: Registered protocol family 1
<5>[ 0.190000] gpio_proc: module loaded and /proc/gpio/ created
<6>[ 0.200000] Register LED Device
<5>[ 0.200000] wl0gpio_proc: module loaded and /proc/wl0gpio/ created
<4>[ 0.210000] AR7100 GPIOC major 0
<6>[ 0.210000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 0.220000] msgmni has been set to 56
<6>[ 0.230000] io scheduler noop registered
<6>[ 0.230000] io scheduler deadline registered (default)
<6>[ 0.230000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
<6>[ 0.260000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 19) is a 16550A
<6>[ 0.270000] console [ttyS0] enabled, bootconsole disabled
<0>[ 0.280000] guessed flashsize = 8M
<0>[ 0.290000] scanning for root partition
<0>[ 0.290000] WRT160NL/E2100L uboot detected
<0>[ 0.290000] bootloader size = 40000
<0>[ 0.300000]
<0>[ 0.300000] found squashfs at 192000
<5>[ 0.310000] Creating 8 MTD partitions on "ar7100-nor0":
<5>[ 0.310000] 0x000000000000-0x000000040000 : "RedBoot"
<5>[ 0.320000] 0x000000040000-0x0000007e0000 : "linux"
<5>[ 0.330000] 0x000000192000-0x0000007a0000 : "rootfs"
<4>[ 0.330000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
<5>[ 0.350000] mtd: partition "rootfs" set to be root filesystem
<5>[ 0.350000] 0x0000007a0000-0x0000007e0000 : "ddwrt"
<5>[ 0.360000] 0x0000007e0000-0x0000007f0000 : "nvram"
<5>[ 0.360000] 0x0000007f0000-0x000000800000 : "FIS directory"
<5>[ 0.370000] 0x0000007f0000-0x000000800000 : "board_config"
<5>[ 0.380000] 0x000000000000-0x000000800000 : "fullflash"
<4>[ 0.390000] ->Oops: flash id 0xc22017 .
<6>[ 0.790000] PPP generic driver version 2.4.2
<6>[ 0.790000] PPP BSD Compression module registered
<6>[ 0.800000] PPP Deflate Compression module registered
<6>[ 0.800000] PPP MPPE Compression module registered
<6>[ 0.810000] NET: Registered protocol family 24
<6>[ 0.810000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 0.850000] ar71xx-ehci ar71xx-ehci.0: Atheros AR91xx built-in EHCI controller
<6>[ 0.860000] ar71xx-ehci ar71xx-ehci.0: new USB bus registered, assigned bus number 1
<6>[ 0.900000] ar71xx-ehci ar71xx-ehci.0: irq 3, io mem 0x1b000000
<6>[ 0.920000] ar71xx-ehci ar71xx-ehci.0: USB 2.0 started, EHCI 1.00
<6>[ 0.920000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 0.930000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 0.940000] usb usb1: Product: Atheros AR91xx built-in EHCI controller
<6>[ 0.940000] usb usb1: Manufacturer: Linux 3.10.108-d8 ehci_hcd
<6>[ 0.950000] usb usb1: SerialNumber: platform
<6>[ 0.950000] hub 1-0:1.0: USB hub found
<6>[ 0.960000] hub 1-0:1.0: 1 port detected
<6>[ 0.970000] u32 classifier
<6>[ 0.970000] Performance counters on
<6>[ 0.980000] input device check on
<6>[ 0.980000] Actions configured
<6>[ 0.990000] Netfilter messages via NETLINK v0.30.
<6>[ 0.990000] nf_conntrack version 0.5.0 (452 buckets, 1808 max)
<4>[ 1.000000] nf_conntrack_rtsp v0.7 loading
<4>[ 1.000000] nf_nat_rtsp v0.7 loading
<6>[ 1.010000] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 1.010000] TCP: westwood registered
<6>[ 1.010000] TCP: hybla registered
<6>[ 1.020000] TCP: vegas registered
<6>[ 1.020000] NET: Registered protocol family 17
<5>[ 1.030000] Bridge firewalling registered
<6>[ 1.030000] 8021q: 802.1Q VLAN Support v1.8
<6>[ 1.040000] searching for nvram
<6>[ 1.040000] nvram size = 65536
<6>[ 1.070000] Atheros AR71xx hardware watchdog driver version 0.1.0
<6>[ 1.080000] ar71xx-wdt: timeout=15 secs (max=21) ref freq=200000000
<6>[ 1.090000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
<6>[ 1.100000] Freeing unused kernel memory: 208K
<6>[ 1.340000] usb 1-1: new high-speed USB device number 2 using ar71xx-ehci
<6>[ 1.770000] usb 1-1: New USB device found, idVendor=058f, idProduct=6387
<6>[ 1.770000] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[ 1.780000] usb 1-1: Product: Mass Storage
<6>[ 1.790000] usb 1-1: Manufacturer: Generic
<6>[ 1.790000] usb 1-1: SerialNumber: 1DF77398
<7>[ 4.620000] ar71xx-wdt: enabling watchdog timer
<6>[ 4.710000] libphy: ag71xx_mdio: probed
<6>[ 5.050000] Registering RTL8306SD switch with Chip ID: 0x5988, version: 0x0000
<6>[ 5.050000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=00008306, driver=Realtek RTL8306S]
<6>[ 5.060000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RMII
<6>[ 5.390000] ag71xx ag71xx.1: connected to PHY at ag71xx-mdio.0:04 [uid=00008306, driver=Realtek RTL8306S]
<6>[ 5.400000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:RMII
<6>[ 5.580000] Loading modules backported from Linux version wireless-drivers-next-for-davem-2017-09-01-0-geb464d4a8d09
<6>[ 5.590000] Backport generated by backports.git backports-20160324-111-g97b8d7c4
<7>[ 6.450000] ath: EEPROM regdomain: 0x0
<7>[ 6.450000] ath: EEPROM indicates default country code should be used
<7>[ 6.450000] ath: doing EEPROM country->regdmn map search
<7>[ 6.450000] ath: country maps to regdmn code: 0x3a
<7>[ 6.450000] ath: Country alpha2 being used: US
<7>[ 6.450000] ath: Regpair used: 0x3a
<7>[ 6.480000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
<6>[ 6.490000] ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2122 RF Rev:a2 mem=0xb80c0000, irq=2
<7>[ 7.060000] ar71xx: pll_reg 0xb8050014: 0x13000a44
<6>[ 7.060000] eth0: link up (100Mbps/Full duplex)
<6>[ 7.700000] usb-storage 1-1:1.0: USB Mass Storage device detected
<6>[ 7.700000] scsi0 : usb-storage 1-1:1.0
<6>[ 7.710000] usbcore: registered new interface driver usb-storage
<5>[ 8.710000] scsi 0:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4
<5>[ 8.720000] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[ 8.730000] sd 0:0:0:0: [sda] 31457280 512-byte logical blocks: (16.1 GB/15.0 GiB)
<5>[ 8.740000] sd 0:0:0:0: [sda] Write Protect is off
<7>[ 8.740000] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
<5>[ 8.740000] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
<6>[ 8.760000] sda: sda1
<5>[ 8.770000] sd 0:0:0:0: [sda] Attached SCSI removable disk
<6>[ 9.580000] device br0 entered promiscuous mode
<6>[ 9.610000] eth0: link down
<6>[ 9.760000] device eth0 entered promiscuous mode
<6>[ 9.950000] device eth1 entered promiscuous mode
<6>[ 9.970000] br0: port 1(eth0) entered forwarding state
<6>[ 9.980000] br0: port 1(eth0) entered forwarding state
<6>[ 9.980000] device br0 left promiscuous mode
<6>[ 10.000000] device br0 entered promiscuous mode
<6>[ 10.040000] device br0 left promiscuous mode
<7>[ 10.060000] ar71xx: pll_reg 0xb8050014: 0x13000a44
<6>[ 10.060000] eth0: link up (100Mbps/Full duplex)
<7>[ 10.220000] ath: EEPROM regdomain: 0x8348
<7>[ 10.220000] ath: EEPROM indicates we should expect a country code
<7>[ 10.220000] ath: doing EEPROM country->regdmn map search
<7>[ 10.220000] ath: country maps to regdmn code: 0x3a
<7>[ 10.220000] ath: Country alpha2 being used: US
<7>[ 10.220000] ath: Regpair used: 0x3a
<7>[ 10.220000] ath: regdomain 0x8348 dynamically updated by user
<4>[ 10.570000] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
<4>[ 10.580000] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
<6>[ 17.220000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
<6>[ 25.000000] br0: port 1(eth0) entered forwarding state
root@160nl-switch:~# uptime
18:01:14 up 2 min, load average: 0.34, 0.30, 0.13
root@160nl-switch:~# date
Fri Sep 6 18:01:18 CDT 2019
root@160nl-switch:~# exit
Connection to 160nl-switch.mrjcd.com closed.
mrjcd@Deb:~$
mrjcd@Deb:~$ ssh root@160nl-switch.mrjcd.com
DD-WRT v3.0-r40932 std (c) 2019 NewMedia-NET GmbH
Release: 09/07/19
Board: Linksys WRT160NL
==========================================================
___ ___ _ _____ ______ ____ ___
/ _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \
/ // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // /
/____/____/ |__/|__/_/|_| /_/ |___/____(_)___/
DD-WRT v3.0
http://www.dd-wrt.com
==========================================================
BusyBox v1.31.0 (2019-09-07 02:25:16 +04) built-in shell (ash)
root@160nl-switch:~# ps
PID USER VSZ STAT COMMAND
1 root 1184 S /sbin/init
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
4 root 0 SW [kworker/0:0]
5 root 0 SW< [kworker/0:0H]
7 root 0 SW< [khelper]
8 root 0 SW [kworker/u2:1]
86 root 0 SW< [writeback]
89 root 0 SW< [bioset]
90 root 0 SW< [crypto]
92 root 0 SW< [kblockd]
104 root 0 SW [khubd]
124 root 0 SW [kworker/0:1]
131 root 0 SW [kswapd0]
132 root 0 SW [fsnotify_mark]
236 root 0 SW< [deferwq]
468 root 940 S /sbin/hotplug2 --set-rules-file /etc/hotplug2.rules --persistent
509 root 1860 S watchdog
531 root 0 SW< [cfg80211]
601 root 0 SW [scsi_eh_0]
602 root 0 SW [usb-storage]
637 root 0 SW [kworker/u2:2]
638 root 0 SW< [kworker/0:1H]
820 root 1384 S syslogd -Z -L
828 root 1232 S dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_rsa_key -p 22 -s
830 root 1384 S klogd
851 root 2808 S /usr/sbin/smbd -D --configfile=/tmp/smb.conf
866 root 2588 S /usr/sbin/nmbd -D --configfile=/tmp/smb.conf
930 root 1820 S wland
1045 root 4428 S httpd -p 80
1047 root 1548 S resetbutton
1095 root 1860 S process_monitor
1098 root 912 S cron
1222 root 1300 R dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_rsa_key -p 22 -s
1223 root 1384 S -sh
1225 root 1384 R ps
root@160nl-switch:~# uptime
18:07:24 up 8 min, load average: 0.07, 0.11, 0.10
root@160nl-switch:~# date
Fri Sep 6 18:07:27 CDT 2019
root@160nl-switch:~# exit
Connection to 160nl-switch.mrjcd.com closed.
mrjcd@Deb:~$