BusyBox v1.24.1 (2016-03-25 03:14:51 CET) built-in shell (ash) root@DogCow-CatCow:~# cat /tmp/unbound.conf server: verbosity: 1 interface: 0.0.0.0 interface: ::0 outgoing-range: 60 outgoing-num-tcp: 1 incoming-num-tcp: 1 msg-buffer-size: 8192 msg-cache-size: 100k msg-cache-slabs: 1 num-queries-per-thread: 30 rrset-cache-size: 100k rrset-cache-slabs: 1 infra-cache-slabs: 1 infra-cache-numhosts: 200 access-control: 0.0.0.0/0 allow access-control: ::0/0 allow username: "" pidfile: "/var/run/unbound.pid" root-hints: "/etc/unbound/named.cache" target-fetch-policy: "2 1 0 0 0 0" harden-short-bufsize: yes harden-large-queries: yes auto-trust-anchor-file: "/etc/unbound/root.key" key-cache-size: 100k key-cache-slabs: 1 neg-cache-size: 10k local-data: "localhost A 127.0.0.1" local-data: "DogCow-CatCow A 192.168.15.26" local-data: "DogCow-CatCow.mrjcd A 192.168.15.26" python: remote-control: root@DogCow-CatCow:~# stopservice unbound root@DogCow-CatCow:~# startservice unbound root@DogCow-CatCow:~# cat /tmp/unbound.conf server: verbosity: 1 interface: 0.0.0.0 interface: ::0 outgoing-range: 60 outgoing-num-tcp: 1 incoming-num-tcp: 1 msg-buffer-size: 8192 msg-cache-size: 100k msg-cache-slabs: 1 num-queries-per-thread: 30 rrset-cache-size: 100k rrset-cache-slabs: 1 infra-cache-slabs: 1 infra-cache-numhosts: 200 access-control: 0.0.0.0/0 allow access-control: ::0/0 allow username: "" pidfile: "/var/run/unbound.pid" root-hints: "/etc/unbound/named.cache" target-fetch-policy: "2 1 0 0 0 0" harden-short-bufsize: yes harden-large-queries: yes auto-trust-anchor-file: "/etc/unbound/root.key" key-cache-size: 100k key-cache-slabs: 1 neg-cache-size: 10k local-data: "localhost A 127.0.0.1" local-data: "DogCow-CatCow A 192.168.15.26" local-data: "DogCow-CatCow.mrjcd A 192.168.15.26" local-data: "2x867MHz.mrjcd A 192.168.15.1" local-data: "Apache.mrjcd A 192.168.15.2" local-data: "JonXboxOne.mrjcd A 192.168.15.3" local-data: "JCD_SM-T210R.mrjcd A 192.168.15.4" local-data: "1505.mrjcd A 192.168.15.5" local-data: "DogCow.mrjcd A 192.168.15.6" local-data: "da-Box.mrjcd A 192.168.15.7" local-data: "Barb.mrjcd A 192.168.15.9" local-data: "Dawn-James.mrjcd A 192.168.15.10" local-data: "VIZIO-TV.mrjcd A 192.168.15.11" local-data: "Jon_DroidMax.mrjcd A 192.168.15.12" local-data: "JCD-Droid-Turbo.mrjcd A 192.168.15.13" local-data: "Volus_Homeworld.mrjcd A 192.168.15.44" local-data: "BRDP-ClientBrdg.mrjcd A 192.168.15.45" local-data: "JCD-WAPv3-WDS.mrjcd A 192.168.15.46" local-data: "WDS-47-House.mrjcd A 192.168.15.47" local-data: "Carroll-Shop-AP.mrjcd A 192.168.15.48" local-data: "BRDP-Bedroom.mrjcd A 192.168.15.49" local-data: "WAPv3-Outback-WDS.mrjcd A 192.168.15.50" local-data: "sixstar-mrjcd.mrjcd A 192.168.15.51" local-data: "WDS-52-Shop.mrjcd A 192.168.15.52" local-data: "NAS-Link-1553.mrjcd A 192.168.15.53" local-data: "WRT160NL-AP.mrjcd A 192.168.15.54" local-data: "WRT54Gv8-2-AP.mrjcd A 192.168.15.55" local-data: "Will-Be-Was.mrjcd A 192.168.15.56" local-data: "E2100L-WDS-South.mrjcd A 192.168.15.57" local-data: "E2100L-WDS-North.mrjcd A 192.168.15.58" local-data: "JonSteevPrinter.mrjcd A 192.168.15.59" python: remote-control: root@DogCow-CatCow:~# dmesg <5>[ 0.000000] Linux version 3.18.29 (root@nmndev) (gcc version 5.3.0 (OpenWrt GCC 5.3.0 r48830) ) #10262 Fri Mar 25 03:14:35 CET 2016 <6>[ 0.000000] bootconsole [early0] enabled <6>[ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc) <4>[ 0.000000] cpu srif ddr srif cpu 560 ddr 400 ahb 200 <6>[ 0.000000] sys id = 2122 Atheros AR9344 ver 1 rev 1.2 (0x2122) <6>[ 0.000000] Determined physical RAM map: <6>[ 0.000000] memory: 08000000 @ 00000000 (usable) <4>[ 0.000000] Zone ranges: <4>[ 0.000000] Normal [mem 0x00000000-0x07ffffff] <4>[ 0.000000] Movable zone start for each node <4>[ 0.000000] Early memory node ranges <4>[ 0.000000] node 0: [mem 0x00000000-0x07ffffff] <6>[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x07ffffff] <7>[ 0.000000] On node 0 totalpages: 32768 <7>[ 0.000000] free_area_init_node: node 0, pgdat 8039aa00, node_mem_map 81000000 <7>[ 0.000000] Normal zone: 256 pages used for memmap <7>[ 0.000000] Normal zone: 0 pages reserved <7>[ 0.000000] Normal zone: 32768 pages, LIFO batch:7 <4>[ 0.000000] Primary instruction cache 64kB, 4-way, VIPT, I-cache aliases, linesize 32 bytes. <4>[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes <7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 <7>[ 0.000000] pcpu-alloc: [0] 0 <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 <5>[ 0.000000] Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd init=/sbin/init <6>[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) <6>[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) <6>[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) <6>[ 0.000000] Writing ErrCtl register=00000000 <6>[ 0.000000] Readback ErrCtl register=00000000 <4>[ 0.000000] Memory: 125564K/131072K available (2689K kernel code, 168K rwdata, 544K rodata, 172K init, 369K bss, 5508K reserved) <6>[ 0.000000] NR_IRQS:83 <6>[ 0.060000] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688) <6>[ 0.070000] pid_max: default: 32768 minimum: 301 <6>[ 0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) <6>[ 0.080000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) <6>[ 0.080000] NET: Registered protocol family 16 <7>[ 0.090000] ar71xx: using random MAC address for eth0 <6>[ 0.300000] Switched to clocksource MIPS <6>[ 0.300000] NET: Registered protocol family 2 <6>[ 0.310000] TCP established hash table entries: 1024 (order: 0, 4096 bytes) <6>[ 0.310000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) <6>[ 0.320000] TCP: Hash tables configured (established 1024 bind 1024) <6>[ 0.320000] TCP: reno registered <6>[ 0.330000] UDP hash table entries: 256 (order: 0, 4096 bytes) <6>[ 0.330000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) <6>[ 0.340000] NET: Registered protocol family 1 <7>[ 0.340000] PCI: CLS 0 bytes, default 32 <5>[ 0.340000] gpio_proc: module loaded and /proc/gpio/ created <6>[ 0.350000] fixup WNDR3700v4 wifi led <5>[ 0.350000] wl0gpio_proc: module loaded and /proc/wl0gpio/ created <6>[ 0.360000] futex hash table entries: 256 (order: -1, 3072 bytes) <6>[ 0.370000] squashfs: version 3.0 (2006/03/15) Phillip Lougher <6>[ 0.380000] msgmni has been set to 245 <6>[ 0.380000] io scheduler noop registered <6>[ 0.390000] io scheduler deadline registered (default) <6>[ 0.390000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled <6>[ 0.400000] console [ttyS0] disabled <6>[ 0.420000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A <6>[ 0.430000] console [ttyS0] enabled <6>[ 0.440000] bootconsole [early0] disabled <4>[ 0.440000] Atheros on-chip NAND FLash Controller Driver, Version 0.1 (c) 2010 Atheros Communications, Ltd. <4>[ 0.460000] Ath Nand ID[87cb35e0]: 2c:f1:80:95:02 <4>[ 0.460000] ONFI MICRON MT29F1G08ABADAWP <4>[ 0.470000] Micron <0>[ 1.670000] <0>[ 1.670000] found squashfs at 0x800000 <5>[ 1.680000] Creating 7 MTD partitions on "ath-nand": <5>[ 1.680000] 0x000000000000-0x000000080000 : "RedBoot" <5>[ 1.700000] 0x0000006c0000-0x000008000000 : "linux" <5>[ 3.740000] 0x000000800000-0x000001e80000 : "rootfs" <5>[ 4.130000] mtd: partition "rootfs" set to be root filesystem <5>[ 4.130000] 0x000001e80000-0x000008000000 : "ddwrt" <5>[ 5.780000] 0x000000340000-0x0000003c0000 : "nvram" <5>[ 5.800000] 0x000000080000-0x0000000c0000 : "board_config" <5>[ 5.810000] 0x000000000000-0x000008000000 : "fullflash" <4>[ 7.970000] ====== NAND Parameters ====== <4>[ 7.970000] sc = 0x87cb3400 bbt = 0x87cffa00 bbt_size = 0x100 nf_ctrl = 0x344 <4>[ 7.970000] page = 0x800 block = 0x20000 oob = 0x40 <4>[ 8.020000] registering PCI controller with io_map_base unset <6>[ 8.030000] PCI host bridge to bus 0000:00 <6>[ 8.030000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff] <6>[ 8.040000] pci_bus 0000:00: root bus resource [io 0x0000] <6>[ 8.040000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] <7>[ 8.050000] pci 0000:00:00.0: [168c:0033] type 00 class 0x028000 <6>[ 8.050000] pci 0000:00:00.0: fixup device configuration <7>[ 8.060000] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit] <7>[ 8.060000] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] <7>[ 8.060000] pci 0000:00:00.0: supports D1 <7>[ 8.060000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot <7>[ 8.060000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 <6>[ 8.060000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit] <6>[ 8.070000] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref] <6>[ 8.070000] pci 0000:00:00.0: using irq 72 for pin 1 <6>[ 8.080000] libphy: Fixed MDIO Bus: probed <6>[ 8.080000] tun: Universal TUN/TAP device driver, 1.6 <6>[ 8.090000] tun: (C) 1999-2004 Max Krasnyansky <6>[ 8.090000] PPP generic driver version 2.4.2 <6>[ 8.100000] PPP BSD Compression module registered <6>[ 8.100000] PPP Deflate Compression module registered <6>[ 8.110000] PPP MPPE Compression module registered <6>[ 8.110000] NET: Registered protocol family 24 <6>[ 8.120000] oprofile: using mips/74K performance monitoring. <6>[ 8.130000] u32 classifier <6>[ 8.130000] Performance counters on <6>[ 8.140000] input device check on <6>[ 8.140000] Actions configured <6>[ 8.140000] Netfilter messages via NETLINK v0.30. <6>[ 8.150000] nf_conntrack version 0.5.0 (1961 buckets, 7844 max) <4>[ 8.150000] nf_conntrack_rtsp v0.6.21 loading <4>[ 8.160000] nf_nat_rtsp v0.6.21 loading <6>[ 8.160000] ip_tables: (C) 2000-2006 Netfilter Core Team <6>[ 8.170000] TCP: westwood registered <6>[ 8.170000] TCP: hybla registered <6>[ 8.180000] TCP: vegas registered <6>[ 8.180000] NET: Registered protocol family 17 <6>[ 8.180000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. <5>[ 8.200000] Bridge firewalling registered <6>[ 8.200000] 8021q: 802.1Q VLAN Support v1.8 <5>[ 8.210000] Key type dns_resolver registered <5>[ 8.230000] Key type encrypted registered <6>[ 8.230000] searching for nvram <6>[ 8.230000] nvram size = 0 <6>[ 8.280000] Atheros AR71xx hardware watchdog driver version 0.1.0 <6>[ 8.280000] ar71xx-wdt: timeout=15 secs (max=107) ref freq=40000000 <6>[ 8.300000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. <6>[ 8.310000] Freeing unused kernel memory: 172K (803b5000 - 803e0000) <7>[ 12.080000] ar71xx-wdt: enabling watchdog timer <6>[ 12.130000] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0 <6>[ 12.210000] libphy: ag71xx_mdio: probed <6>[ 12.800000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316] <6>[ 12.810000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII <6>[ 13.310000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68 <6>[ 13.320000] Backport generated by backports.git backports-20151218-0-g2f58d9d <7>[ 14.530000] ath: EEPROM regdomain: 0x0 <7>[ 14.530000] ath: EEPROM indicates default country code should be used <7>[ 14.530000] ath: doing EEPROM country->regdmn map search <7>[ 14.530000] ath: country maps to regdmn code: 0x3a <7>[ 14.530000] ath: Country alpha2 being used: US <7>[ 14.530000] ath: Regpair used: 0x3a <7>[ 14.540000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' <6>[ 14.540000] ieee80211 phy0: Atheros AR9340 Rev:0 mem=0xb8100000, irq=78 <0>[ 14.550000] 2 vs 0 <4>[ 14.550000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002) <7>[ 14.560000] ath: EEPROM regdomain: 0x0 <7>[ 14.560000] ath: EEPROM indicates default country code should be used <7>[ 14.560000] ath: doing EEPROM country->regdmn map search <7>[ 14.560000] ath: country maps to regdmn code: 0x3a <7>[ 14.560000] ath: Country alpha2 being used: US <7>[ 14.560000] ath: Regpair used: 0x3a <7>[ 14.570000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' <6>[ 14.580000] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=72 <6>[ 14.910000] eth0: link up (1000Mbps/Full duplex) <6>[ 16.930000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 1 is up <6>[ 16.930000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 2 is up <6>[ 16.940000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 3 is up <6>[ 16.950000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 4 is up <6>[ 17.200000] using kernel STP <6>[ 17.330000] device br0 entered promiscuous mode <6>[ 17.400000] device vlan1 entered promiscuous mode <6>[ 17.410000] device eth0 entered promiscuous mode <6>[ 17.410000] br0: port 1(vlan1) entered forwarding state <6>[ 17.420000] br0: port 1(vlan1) entered forwarding state <6>[ 17.430000] device br0 left promiscuous mode <6>[ 17.440000] device br0 entered promiscuous mode <6>[ 17.480000] device br0 left promiscuous mode <6>[ 18.950000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 5 is up <6>[ 19.420000] br0: port 1(vlan1) entered forwarding state <6>[ 22.830000] device ath0 entered promiscuous mode <6>[ 22.830000] br0: port 2(ath0) entered forwarding state <6>[ 22.840000] br0: port 2(ath0) entered forwarding state <6>[ 22.850000] br0: port 2(ath0) entered disabled state <5>[ 24.090000] random: hostapd urandom read with 42 bits of entropy available <6>[ 24.120000] br0: port 2(ath0) entered forwarding state <6>[ 24.120000] br0: port 2(ath0) entered forwarding state <6>[ 24.140000] device ath0.1 entered promiscuous mode <6>[ 24.150000] br1: port 1(ath0.1) entered listening state <6>[ 24.150000] br1: port 1(ath0.1) entered listening state <6>[ 24.730000] device ath1 entered promiscuous mode <6>[ 24.740000] br0: port 3(ath1) entered forwarding state <6>[ 24.740000] br0: port 3(ath1) entered forwarding state <6>[ 25.120000] br0: port 3(ath1) entered disabled state <6>[ 25.360000] br0: port 3(ath1) entered forwarding state <6>[ 25.370000] br0: port 3(ath1) entered forwarding state <6>[ 26.120000] br0: port 2(ath0) entered forwarding state <6>[ 26.150000] br1: port 1(ath0.1) entered learning state <4>[ 26.520000] IMQ: autocreate imq0 NS 803af800 <4>[ 26.520000] IMQ: autocreate imq1 NS 803af800 <6>[ 26.530000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1) <6>[ 26.530000] Hooking IMQ before NAT on PREROUTING. <6>[ 26.540000] Hooking IMQ after NAT on POSTROUTING. <6>[ 27.160000] device vlan2 entered promiscuous mode <6>[ 27.370000] br0: port 3(ath1) entered forwarding state <6>[ 28.150000] br1: topology change detected, propagating <6>[ 28.150000] br1: port 1(ath0.1) entered forwarding state <6>[ 32.900000] device vlan2 left promiscuous mode <5>[ 36.720000] random: nonblocking pool is initialized <4>[ 39.690000] IMQ: remove dev imq0 <4>[ 39.700000] IMQ: remove dev imq1 <6>[ 39.710000] IMQ driver unloaded successfully. <4>[ 40.010000] IMQ: autocreate imq0 NS 803af800 <4>[ 40.010000] IMQ: autocreate imq1 NS 803af800 <6>[ 40.010000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1) <6>[ 40.020000] Hooking IMQ before NAT on PREROUTING. <6>[ 40.030000] Hooking IMQ after NAT on POSTROUTING. <6>[ 40.600000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead. <4>[ 50.650000] IMQ: remove dev imq0 <4>[ 50.650000] IMQ: remove dev imq1 <6>[ 50.660000] IMQ driver unloaded successfully. <4>[ 50.930000] IMQ: autocreate imq0 NS 803af800 <4>[ 50.940000] IMQ: autocreate imq1 NS 803af800 <6>[ 50.940000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1) <6>[ 50.950000] Hooking IMQ before NAT on PREROUTING. <6>[ 50.960000] Hooking IMQ after NAT on POSTROUTING. root@DogCow-CatCow:~# uptime 15:36:54 up 2 min, load average: 0.34, 0.32, 0.13 root@DogCow-CatCow:~# free total used free shared buffers cached Mem: 125736 42764 82972 4 3820 9476 -/+ buffers/cache: 29468 96268 Swap: 0 0 0 root@DogCow-CatCow:~# exit