# EA8500 -- build reboots within 10 min -- also changed permissions on USB FAT32 16GB flash drive to READ ONLY :-( DD-WRT v3.0-r30796 std (c) 2016 NewMedia-NET GmbH Release: 10/25/16 root@---.mrjcd's password: ========================================================== ___ ___ _ _____ ______ ____ ___ / _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \ / // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // / /____/____/ |__/|__/_/|_| /_/ |___/____(_)___/ DD-WRT v3.0 http://www.dd-wrt.com ========================================================== BusyBox v1.24.2 (2016-10-25 00:18:40 CEST) built-in shell (ash) root@---:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.18.42 (root@seg-desktop) (gcc version 6.1.0 (LEDE GCC 6.1.0 r1009) ) #108 SMP PREEMPT Fri Oct 14 01:03:03 CEST 2016 [ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Linksys EA8500 WiFi Router [ 0.000000] Ignoring memory range 0x41500000 - 0x42000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 122880 [ 0.000000] free_area_init_node: node 0, pgdat c071c800, node_mem_map ddb40000 [ 0.000000] Normal zone: 960 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 122880 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 9 pages/cpu @ddfd3000 s7552 r8192 d21120 u36864 [ 0.000000] pcpu-alloc: s7552 r8192 d21120 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920 [ 0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:14 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 481240K/491520K available (3850K kernel code, 279K rwdata, 1104K rodata, 180K init, 403K bss, 10280K reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xde800000 - 0xff000000 ( 520 MB) [ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc06dee1c (4956 kB) [ 0.000000] .init : 0xc06df000 - 0xc070c000 ( 180 kB) [ 0.000000] .data : 0xc070c000 - 0xc0751d04 ( 280 kB) [ 0.000000] .bss : 0xc0751d04 - 0xc07b6b84 ( 404 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000013] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 687194767200ns [ 0.000028] Switching to timer-based delay loop, resolution 160ns [ 0.000437] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500) [ 0.000459] pid_max: default: 32768 minimum: 301 [ 0.000705] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000721] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001367] CPU: Testing write buffer coherency: ok [ 0.001632] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002115] Setting up static identity map for 0x42213180 - 0x422131d8 [ 0.063432] CPU1: Booted secondary processor [ 0.063564] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.063684] Brought up 2 CPUs [ 0.063709] SMP: Total of 2 processors activated (25.00 BogoMIPS). [ 0.063720] CPU: All CPU(s) started in SVC mode. [ 0.078427] VFP support v0.3: implementor 51 architecture 0 part 4d variant 2 rev 0 [ 0.078958] pinctrl core: initialized pinctrl subsystem [ 0.089525] NET: Registered protocol family 16 [ 0.089853] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.113852] cpuidle: using governor ladder [ 0.144867] cpuidle: using governor menu [ 0.164188] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342 [ 0.164255] qcom_rpm 108000.rpm: failed to mark ack irq as wakeup [ 0.164312] qcom_rpm 108000.rpm: failed to mark wakeup irq as wakeup [ 0.199485] pps_core: LinuxPPS API ver. 1 registered [ 0.199498] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.199537] PTP clock support registered [ 0.200656] pcie_init: pcie_init: unable to create IPC log context for pcie0-short [ 0.200670] pcie_init: pcie_init: unable to create IPC log context for pcie0-long [ 0.200681] pcie_init: pcie_init: unable to create IPC log context for pcie1-short [ 0.200692] pcie_init: pcie_init: unable to create IPC log context for pcie1-long [ 0.201089] Switched to clocksource dg_timer [ 0.202502] NET: Registered protocol family 2 [ 0.203197] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.203238] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.203291] TCP: Hash tables configured (established 4096 bind 4096) [ 0.203337] TCP: reno registered [ 0.203357] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.203380] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.203615] NET: Registered protocol family 1 [ 0.203686] PCI: CLS 0 bytes, default 64 [ 0.204822] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.204920] Crashlog allocated RAM at address 0x5ff00000 [ 0.205808] squashfs: version 3.0 (2006/03/15) Phillip Lougher [ 0.205847] msgmni has been set to 939 [ 0.208174] io scheduler noop registered [ 0.208199] io scheduler deadline registered (default) [ 0.209579] 1b500000.pci supply vdda not found, using dummy regulator [ 0.209663] 1b500000.pci supply vdda_phy not found, using dummy regulator [ 0.209741] 1b500000.pci supply vdda_refclk not found, using dummy regulator [ 0.240723] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00 [ 0.240746] pci_bus 0000:00: root bus resource [io 0xfe00000-0xfffff] (bus address [0x1fc00000-0xfefffff]) [ 0.240761] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff] [ 0.240778] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.240826] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400 [ 0.240964] pci 0000:00:00.0: supports D1 [ 0.240978] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 0.241370] PCI: bus0: Fast back to back transfers disabled [ 0.241706] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000 [ 0.241908] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 0.242852] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.243282] PCI: bus1: Fast back to back transfers disabled [ 0.243302] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.243459] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff] [ 0.243483] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit] [ 0.243594] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.243616] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff] [ 0.244067] aer 0000:00:00.0:pcie02: service driver aer loaded [ 0.244409] 1b700000.pci supply vdda not found, using dummy regulator [ 0.244495] 1b700000.pci supply vdda_phy not found, using dummy regulator [ 0.244578] 1b700000.pci supply vdda_refclk not found, using dummy regulator [ 0.274821] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00 [ 0.274842] pci_bus 0001:00: root bus resource [io 0x31e10000-0xfffff] (bus address [0x63c00000-0x31eeffff]) [ 0.274858] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff] [ 0.274873] pci_bus 0001:00: root bus resource [bus 00-ff] [ 0.274917] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400 [ 0.275036] pci 0001:00:00.0: supports D1 [ 0.275050] pci 0001:00:00.0: PME# supported from D0 D1 D3hot [ 0.275348] PCI: bus0: Fast back to back transfers disabled [ 0.275671] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000 [ 0.275871] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 0.276811] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold [ 0.277233] PCI: bus1: Fast back to back transfers disabled [ 0.277251] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.277469] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff] [ 0.277491] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit] [ 0.277598] pci 0001:00:00.0: PCI bridge to [bus 01] [ 0.277617] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff] [ 0.278013] aer 0001:00:00.0:pcie02: service driver aer loaded [ 0.278348] 1b900000.pci supply vdda not found, using dummy regulator [ 0.278432] 1b900000.pci supply vdda_phy not found, using dummy regulator [ 0.278508] 1b900000.pci supply vdda_refclk not found, using dummy regulator [ 0.413308] qcom-pcie 1b900000.pci: link initialization failed [ 0.415399] qcom-pcie 1b900000.pci: PCI host bridge to bus 0002:00 [ 0.415420] pci_bus 0002:00: root bus resource [io 0x35e20000-0xfffff] (bus address [0x6bc00000-0x35edffff]) [ 0.415435] pci_bus 0002:00: root bus resource [mem 0x32000000-0x35dfffff] [ 0.415451] pci_bus 0002:00: root bus resource [bus 00-ff] [ 0.415500] PCI: bus0: Fast back to back transfers enabled [ 0.418050] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0 [ 0.419360] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.420354] msm_serial 16340000.serial: msm_serial: detected port #0 [ 0.420452] msm_serial 16340000.serial: uartclk = 1843200 [ 0.420513] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 184, base_baud = 115200) is a MSM [ 0.420567] msm_serial: console setup on port #0 [ 1.132694] console [ttyMSM0] enabled [ 1.137462] msm_serial: driver initialized [ 1.144364] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1 [ 1.144752] nand: AMD/Spansion S34MS01G2 [ 1.151263] nand: 128MiB, SLC, page size: 2048, OOB size: 64 [ 1.155260] Scanning device for bad blocks [ 1.598042] random: nonblocking pool is initialized [ 1.905429] 19 ofpart partitions found on MTD device qcom-nandc [ 1.905458] Creating 19 MTD partitions on "qcom-nandc": [ 1.910154] 0x000000000000-0x000000040000 : "SBL1" [ 1.916309] 0x000000040000-0x000000180000 : "MIBIB" [ 1.921003] 0x000000180000-0x0000002c0000 : "SBL2" [ 1.925822] 0x0000002c0000-0x000000540000 : "SBL3" [ 1.930612] 0x000000540000-0x000000660000 : "DDRCONFIG" [ 1.935469] 0x000000660000-0x000000780000 : "SSD" [ 1.940513] 0x000000780000-0x000000a00000 : "TZ" [ 1.945454] 0x000000a00000-0x000000c80000 : "RPM" [ 1.950084] 0x000000c80000-0x000000dc0000 : "art" [ 1.954757] 0x000000dc0000-0x000000ec0000 : "APPSBL" [ 1.959366] 0x000000ec0000-0x000000f00000 : "u_env" [ 1.964471] 0x000000f00000-0x000000f40000 : "s_env" [ 1.969018] 0x000000f40000-0x000000f80000 : "devinfo" [ 1.973915] 0x000000f80000-0x000003780000 : "linux" [ 1.979104] 0x000001280000-0x000003780000 : "rootfs" [ 1.983856] mtd: partition "rootfs" set to be root filesystem [ 1.988205] 0x000003780000-0x000005f40000 : "linux2" [ 1.994712] 0x000003a80000-0x000005f40000 : "rootfs2" [ 1.999691] 0x000005f40000-0x000005f80000 : "nvram" [ 2.004677] 0x000005f80000-0x000008000000 : "ddwrt" [ 2.010540] IMQ: autocreate imq0 NS c074bfc0 [ 2.013967] IMQ: autocreate imq1 NS c074bfc0 [ 2.017886] IMQ driver loaded successfully. (numdevs = 16, numqueues = 1) [ 2.022284] Hooking IMQ after NAT on PREROUTING. [ 2.028985] Hooking IMQ before NAT on POSTROUTING. [ 2.034081] libphy: Fixed MDIO Bus: probed [ 2.038776] libphy: GPIO Bitbanged MDIO: probed [ 2.062798] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0 [ 2.266077] tun: Universal TUN/TAP device driver, 1.6 [ 2.266102] tun: (C) 1999-2004 Max Krasnyansky [ 2.271550] stmmac - user ID: 0x10, Synopsys ID: 0x37 [ 2.276180] Ring mode enabled [ 2.281297] DMA HW capability register supported [ 2.284346] Enhanced/Alternate descriptors [ 2.289022] Enabled extended descriptors [ 2.293077] RX Checksum Offload Engine supported (type 2) [ 2.297184] TX Checksum insertion supported [ 2.302633] Wake-Up On Lan supported [ 2.307052] Enable RX Mitigation via HW Watchdog Timer [ 2.311795] stmmac - user ID: 0x10, Synopsys ID: 0x37 [ 2.315588] Ring mode enabled [ 2.320791] DMA HW capability register supported [ 2.323833] Enhanced/Alternate descriptors [ 2.328518] Enabled extended descriptors [ 2.332594] RX Checksum Offload Engine supported (type 2) [ 2.336682] TX Checksum insertion supported [ 2.342121] Wake-Up On Lan supported [ 2.346545] Enable RX Mitigation via HW Watchdog Timer [ 2.350725] PPP generic driver version 2.4.2 [ 2.355290] PPP BSD Compression module registered [ 2.359606] PPP Deflate Compression module registered [ 2.364302] PPP MPPE Compression module registered [ 2.369251] NET: Registered protocol family 24 [ 2.374025] PPTP driver version 0.8.5 [ 2.378482] i2c /dev entries driver [ 2.387759] Speed bin: 0 [ 2.387781] PVS bin: 1 [ 2.389777] platform cpufreq-krait.0: Driver cpufreq-krait requests probe deferral [ 2.393610] L2 @ QSB rate. Forcing new rate. [ 2.399308] L2 @ 387500 KHz [ 2.403700] CPU0 @ 800000 KHz [ 2.406020] CPU1 @ QSB rate. Forcing new rate. [ 2.409227] CPU1 @ 384000 KHz [ 2.413883] GACT probability NOT on [ 2.416543] Mirror/redirect action on [ 2.419871] Simple TC action Loaded [ 2.424589] netem: version 1.3 [ 2.426983] u32 classifier [ 2.430060] Performance counters on [ 2.432814] input device check on [ 2.436487] Actions configured [ 2.440347] Netfilter messages via NETLINK v0.30. [ 2.443749] nf_conntrack version 0.5.0 (7519 buckets, 30076 max) [ 2.448703] nf_conntrack_rtsp v0.7 loading [ 2.455064] xt_time: kernel timezone is -0000 [ 2.458388] ip_set: protocol 6 [ 2.463137] gre: GRE over IPv4 demultiplexor driver [ 2.466000] nf_nat_rtsp v0.7 loading [ 2.470556] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.474690] TCP: bic registered [ 2.479640] TCP: cubic registered [ 2.482589] TCP: westwood registered [ 2.485976] TCP: highspeed registered [ 2.489624] TCP: hybla registered [ 2.493243] TCP: htcp registered [ 2.496480] TCP: vegas registered [ 2.499779] TCP: veno registered [ 2.503084] TCP: scalable registered [ 2.506288] TCP: lp registered [ 2.509847] TCP: yeah registered [ 2.512807] TCP: illinois registered [ 2.516104] NET: Registered protocol family 17 [ 2.519736] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 2.524048] Bridge firewalling registered [ 2.536764] 8021q: 802.1Q VLAN Support v1.8 [ 2.540706] Registering SWP/SWPB emulation handler [ 2.548511] trying to register driver generic_krait [ 2.549441] Frequency table not initialized. [ 2.554399] Frequency table not initialized. [ 2.558749] Frequency table not initialized. [ 2.563054] Frequency table not initialized. [ 2.567221] Frequency table not initialized. [ 2.573110] Frequency table not initialized. [ 2.575785] Frequency table not initialized. [ 2.579994] Frequency table not initialized. [ 2.584289] Frequency table not initialized. [ 2.588483] Frequency table not initialized. [ 2.592803] driver generic_krait up and running [ 2.597034] searching for nvram [ 2.601267] nvram size = -1066988274 [ 2.624664] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.632457] UBIFS error (pid 1): ubifs_mount: cannot open "ubi0:rootfs", error -19 [ 2.634704] VFS: Mounted root (squashfs filesystem) readonly on device 31:14. [ 2.639079] Freeing unused kernel memory: 180K (c06df000 - c070c000) [ 4.878563] UBIFS error (pid 735): ubifs_mount: cannot open "ubi0:rootfs_data", error -19 [ 5.550746] Loading modules backported from Linux version wt-2016-10-03-1-g6fcb1a6 [ 5.550775] Backport generated by backports.git backports-20160324-9-g0e38f5c [ 6.040733] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142) [ 6.041300] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 6.173647] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2 [ 6.174007] ath10k_pci 0000:01:00.0: Falling back to user helper [ 6.471826] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002 [ 6.471863] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0 [ 6.481952] ath10k_pci 0000:01:00.0: firmware ver 10.4.3.00063 api 5 features no-p2p,peer-flow-ctrl crc32 a0d385ce [ 6.498474] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002 from ath10k/QCA99X0/hw2.0/board-2.bin [ 6.498669] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 62700264 [ 7.369133] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 7.484024] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off [ 7.688775] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1 [ 7.746165] ath: EEPROM regdomain: 0x0 [ 7.746178] ath: EEPROM indicates default country code should be used [ 7.746187] ath: doing EEPROM country->regdmn map search [ 7.746200] ath: country maps to regdmn code: 0x3a [ 7.746210] ath: Country alpha2 being used: US [ 7.746219] ath: Regpair used: 0x3a [ 7.753648] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142) [ 7.754231] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 7.883499] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0001:01:00.0.bin failed with error -2 [ 7.883545] ath10k_pci 0001:01:00.0: Falling back to user helper [ 7.894980] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002 [ 7.899266] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0 [ 7.911920] ath10k_pci 0001:01:00.0: firmware ver 10.4.3.00063 api 5 features no-p2p,peer-flow-ctrl crc32 a0d385ce [ 7.916738] ath10k_pci 0001:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002 from ath10k/QCA99X0/hw2.0/board-2.bin [ 7.927011] ath10k_pci 0001:01:00.0: board_file api 1 bmi_id N/A crc32 62700264 [ 9.116252] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1 [ 9.180213] ath: EEPROM regdomain: 0x0 [ 9.180237] ath: EEPROM indicates default country code should be used [ 9.180254] ath: doing EEPROM country->regdmn map search [ 9.180279] ath: country maps to regdmn code: 0x3a [ 9.180299] ath: Country alpha2 being used: US [ 9.180315] ath: Regpair used: 0x3a [ 9.378408] usbcore: registered new interface driver usbfs [ 9.379288] usbcore: registered new interface driver hub [ 9.383381] usbcore: registered new device driver usb [ 9.433262] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 9.442585] ehci-platform: EHCI generic platform driver [ 9.466907] ehci-pci: EHCI PCI platform driver [ 9.557530] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 9.834747] soc:usb30@0 supply gdsc not found, using dummy regulator [ 9.836107] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 9.840417] soc:usb30@1 supply gdsc not found, using dummy regulator [ 9.840503] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 9.854587] platform 10000000.dwc3: Driver dwc3 requests probe deferral [ 9.859755] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 9.866905] platform 10000000.dwc3: Driver dwc3 requests probe deferral [ 9.871896] 100f8800.phy supply vddcx not found, using dummy regulator [ 9.871945] 100f8800.phy supply v3p3 not found, using dummy regulator [ 9.871988] 100f8800.phy supply v1p8 not found, using dummy regulator [ 9.872027] 100f8800.phy supply vbus not found, using dummy regulator [ 9.872173] 110f8800.phy supply vddcx not found, using dummy regulator [ 9.872215] 110f8800.phy supply v3p3 not found, using dummy regulator [ 9.872255] 110f8800.phy supply v1p8 not found, using dummy regulator [ 9.872314] 110f8800.phy supply vbus not found, using dummy regulator [ 9.925022] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 9.929594] 100f8830.phy supply vddcx not found, using dummy regulator [ 9.929656] 100f8830.phy supply v1p8 not found, using dummy regulator [ 9.929736] qcom-dwc3-ssphy 100f8830.phy: cannot get HSIO settings from device node, using default values [ 9.929788] 110f8830.phy supply vddcx not found, using dummy regulator [ 9.929830] 110f8830.phy supply v1p8 not found, using dummy regulator [ 9.929891] qcom-dwc3-ssphy 110f8830.phy: cannot get HSIO settings from device node, using default values [ 9.973465] qcom-dwc3-hsphy 100f8800.phy: cannot set voltage for vddcx [ 9.982696] qcom-dwc3-hsphy 100f8800.phy: cannot set voltage for v3p3 [ 9.989172] qcom-dwc3-hsphy 100f8800.phy: cannot set voltage for v1p8 [ 9.998078] qcom-dwc3-ssphy 100f8830.phy: cannot set voltage for vddcx [ 10.242476] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 10.242552] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 10.247030] xhci-hcd xhci-hcd.0.auto: irq 237, io mem 0x10000000 [ 10.256234] hub 1-0:1.0: USB hub found [ 10.260694] hub 1-0:1.0: 1 port detected [ 10.265281] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 10.268317] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 10.275186] hub 2-0:1.0: USB hub found [ 10.281275] hub 2-0:1.0: 1 port detected [ 10.285911] qcom-dwc3-hsphy 110f8800.phy: cannot set voltage for vddcx [ 10.289045] qcom-dwc3-hsphy 110f8800.phy: cannot set voltage for v3p3 [ 10.295458] qcom-dwc3-hsphy 110f8800.phy: cannot set voltage for v1p8 [ 10.304391] qcom-dwc3-ssphy 110f8830.phy: cannot set voltage for vddcx [ 10.542339] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 10.542386] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 10.546897] xhci-hcd xhci-hcd.1.auto: irq 142, io mem 0x11000000 [ 10.556145] hub 3-0:1.0: USB hub found [ 10.560563] hub 3-0:1.0: 1 port detected [ 10.564806] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 10.568179] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 10.574888] hub 4-0:1.0: USB hub found [ 10.581139] hub 4-0:1.0: 1 port detected [ 10.882759] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 14.940272] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 14.940352] usb usb4: USB disconnect, device number 1 [ 14.948043] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered [ 14.949438] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 14.959101] usb usb3: USB disconnect, device number 1 [ 14.960158] usb 3-1: USB disconnect, device number 2 [ 14.969280] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered [ 14.970155] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 14.980156] usb usb2: USB disconnect, device number 1 [ 14.982644] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 14.986120] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 14.991666] usb usb1: USB disconnect, device number 1 [ 14.998474] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 15.012446] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 15.012572] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 15.017045] xhci-hcd xhci-hcd.0.auto: irq 237, io mem 0x10000000 [ 15.026186] hub 1-0:1.0: USB hub found [ 15.030816] hub 1-0:1.0: 1 port detected [ 15.035430] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 15.038420] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 15.045303] hub 2-0:1.0: USB hub found [ 15.051292] hub 2-0:1.0: 1 port detected [ 15.056291] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 15.059406] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 15.064559] xhci-hcd xhci-hcd.1.auto: irq 142, io mem 0x11000000 [ 15.073014] hub 3-0:1.0: USB hub found [ 15.078240] hub 3-0:1.0: 1 port detected [ 15.082427] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 15.085854] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 15.092229] hub 4-0:1.0: USB hub found [ 15.098717] hub 4-0:1.0: 1 port detected [ 15.134889] SCSI subsystem initialized [ 15.221926] usbcore: registered new interface driver usb-storage [ 15.290347] libata version 3.00 loaded. [ 15.379961] ahci 29000000.sata: forcing port_map 0x0 -> 0x1 [ 15.380028] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 15.384452] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst [ 15.394892] scsi host0: ahci_platform [ 15.401525] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 15.405553] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 241 [ 15.545562] usb-storage 3-1:1.0: USB Mass Storage device detected [ 15.549692] scsi host1: usb-storage 3-1:1.0 [ 15.761863] ata1: SATA link down (SStatus 0 SControl 300) [ 16.545840] scsi 1:0:0:0: Direct-Access PNY USB 2.0 FD 0.00 PQ: 0 ANSI: 2 [ 16.548688] sd 1:0:0:0: [sda] 31711232 512-byte logical blocks: (16.2 GB/15.1 GiB) [ 16.553408] sd 1:0:0:0: [sda] Write Protect is off [ 16.560442] sd 1:0:0:0: [sda] Mode Sense: 00 00 00 00 [ 16.560696] sd 1:0:0:0: [sda] Asking for cache data failed [ 16.565531] sd 1:0:0:0: [sda] Assuming drive cache: write through [ 16.575000] sda: sda1 [ 16.589876] sd 1:0:0:0: [sda] Attached SCSI removable disk [ 16.843279] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 16.851756] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 17.626244] device br0 entered promiscuous mode [ 17.689177] device vlan1 entered promiscuous mode [ 17.689205] device eth0 entered promiscuous mode [ 17.693148] br0: port 1(vlan1) entered forwarding state [ 17.697570] br0: port 1(vlan1) entered forwarding state [ 17.709938] device br0 left promiscuous mode [ 17.712686] device br0 entered promiscuous mode [ 17.774346] device br0 left promiscuous mode [ 19.691455] br0: port 1(vlan1) entered forwarding state [ 23.554588] device ath0 entered promiscuous mode [ 26.803141] br0: port 2(ath0) entered forwarding state [ 26.803219] br0: port 2(ath0) entered forwarding state [ 28.405500] device ath1 entered promiscuous mode [ 28.801460] br0: port 2(ath0) entered forwarding state [ 29.118547] br0: port 3(ath1) entered forwarding state [ 29.118592] br0: port 3(ath1) entered forwarding state [ 29.663615] device vlan2 entered promiscuous mode [ 30.515637] device vlan2 left promiscuous mode [ 31.111443] br0: port 3(ath1) entered forwarding state [ 31.901530] xt_ndpi 3.0 (nDPI wrapper module). root@---:~# ps PID USER VSZ STAT COMMAND 1 root 1292 S /sbin/init 2 root 0 SW [kthreadd] 3 root 0 SW [ksoftirqd/0] 5 root 0 SW< [kworker/0:0H] 7 root 0 SW [rcu_preempt] 8 root 0 SW [rcu_sched] 9 root 0 SW [rcu_bh] 10 root 0 SW [migration/0] 11 root 0 SW [migration/1] 12 root 0 SW [ksoftirqd/1] 14 root 0 SW< [kworker/1:0H] 15 root 0 SW< [khelper] 16 root 0 SW< [writeback] 17 root 0 SW [kworker/0:1] 18 root 0 SW< [crypto] 19 root 0 SW< [bioset] 20 root 0 SW< [kblockd] 21 root 0 SW [kswapd0] 22 root 0 SW [fsnotify_mark] 31 root 0 SW [kworker/u4:1] 34 root 0 SW [kworker/1:1] 43 root 0 SW< [deferwq] 44 root 0 SW [kworker/0:2] 45 root 0 SW [kworker/1:2] 714 root 692 S /sbin/hotplug2 --set-rules-file /etc/hotplug2.rules --persistent 774 root 0 SW< [cfg80211] 785 root 0 SW< [ath10k_wq] 786 root 0 SW< [ath10k_aux_wq] 787 root 0 SW [kworker/u4:2] 789 root 0 SW< [ath10k_wq] 790 root 0 SW< [ath10k_aux_wq] 892 root 0 SW< [ata_sff] 897 root 0 SW [scsi_eh_0] 898 root 0 SW< [scsi_tmf_0] 899 root 0 SW [scsi_eh_1] 902 root 0 SW< [scsi_tmf_1] 903 root 0 SW [usb-storage] 1106 root 2816 S /usr/sbin/smbd -D --configfile=/tmp/smb.conf 1108 root 2604 S /usr/sbin/nmbd -D --configfile=/tmp/smb.conf 1130 root 2192 S hostapd -B -P /var/run/ath0_hostapd.pid /tmp/ath0_hostap.conf 1155 root 2192 S hostapd -B -P /var/run/ath1_hostapd.pid /tmp/ath1_hostap.conf 1268 root 1072 S telnetd 1272 root 0 SW< [kworker/1:1H] 1273 root 0 SW< [kworker/0:1H] 1291 root 788 S dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_rsa_key -p 22 1305 root 840 S dnsmasq -u root -g root --conf-file=/tmp/dnsmasq.conf --cache-size=1500 1601 root 1444 S ttraff 1740 root 1072 S syslogd -L 1744 root 1072 S klogd 1754 root 1500 S resetbutton 1980 root 3784 S httpd -p 80 2275 root 1288 S process_monitor 2660 root 1408 S upnp -D -W vlan2 3339 root 1528 S wland 3340 root 1072 S udhcpc -i vlan2 -p /var/run/udhcpc.pid -s /tmp/udhcpc -O routes -O msstaticroutes -O staticroutes 3487 root 668 S cron 3496 root 7124 S unbound -c /tmp/unbound.conf 4401 root 2956 S /usr/sbin/smbd -D --configfile=/tmp/smb.conf 5550 root 0 SW [kworker/0:0] 6339 root 860 S dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_rsa_key -p 22 6340 root 1076 S -sh 6343 root 0 SW [kworker/1:0] 6354 root 1072 R ps root@---:~# Read from remote host ---.mrjcd: Connection reset by peer Connection to ---.mrjcd closed.