mrjcd@daDeb:~$ ssh root@citadel-station-homeworld.mrjcd.com
DD-WRT v3.0-r59887 std (c) 2025 NewMedia-NET GmbH
Release: 02/27/25
Board: Linksys EA8500
==========================================================
___ ___ _ _____ ______ ____ ___
/ _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \
/ // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // /
/____/____/ |__/|__/_/|_| /_/ |___/____(_)___/
DD-WRT v3.0
https://www.dd-wrt.com
==========================================================
BusyBox v1.37.0 (2025-02-27 10:02:06 +07) built-in shell (ash)
root@Citadel-Station-Homeworld:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux (LTO) version 6.1.129-rt28 (root@server2) (arm-openwrt-linux-gcc (OpenWrt GCC 14.1.0 r26085-2aa6c875f8) 14.1.0, GNU ld (GNU Binutils) 2.42) #531 SMP Sat Feb 22 19:52:15 +07 2025
[ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[ 0.000000] arch name armv7l, elf name v7l
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: Linksys EA8500 WiFi Router
[ 0.000000] OF: fdt: Ignoring memory range 0x40000000 - 0x42000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000042000000-0x000000005fffffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000042000000-0x000000005fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000042000000-0x000000005fffffff]
[ 0.000000] percpu: Embedded 11 pages/cpu s12820 r8192 d24044 u45056
[ 0.000000] pcpu-alloc: s12820 r8192 d24044 u45056 alloc=11*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 121920
[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 nohz_full=all rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:14
[ 0.000000] Unknown kernel command line parameters "nohz_full=all", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 478552K/491520K available (4990K kernel code, 681K rwdata, 960K rodata, 1024K init, 372K bss, 12968K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[ 0.000002] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[ 0.000024] Switching to timer-based delay loop, resolution 160ns
[ 0.000289] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[ 0.000315] CPU: Testing write buffer coherency: ok
[ 0.000376] pid_max: default: 32768 minimum: 301
[ 0.000589] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.000612] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.001516] qcom_scm: convention: smc legacy
[ 0.002485] Setting up static identity map for 0x42300000 - 0x42300060
[ 0.002667] rcu: Hierarchical SRCU implementation.
[ 0.002674] rcu: Max phase no-delay instances is 1000.
[ 0.003195] smp: Bringing up secondary CPUs ...
[ 0.005110] smp: Brought up 1 node, 2 CPUs
[ 0.005125] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[ 0.005137] CPU: All CPU(s) started in SVC mode.
[ 0.017224] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[ 0.017401] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.017434] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.017563] pinctrl core: initialized pinctrl subsystem
[ 0.019478] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.019956] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.021598] thermal_sys: Registered thermal governor 'step_wise'
[ 0.021896] cpuidle: using governor ladder
[ 0.064144] cryptd: max_cpu_qlen set to 1000
[ 0.066665] pps_core: LinuxPPS API ver. 1 registered
[ 0.066677] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.066713] PTP clock support registered
[ 0.068710] mctp: management component transport protocol core
[ 0.068721] NET: Registered PF_MCTP protocol family
[ 0.069284] clocksource: Switched to clocksource dg_timer
[ 0.069613] VFS: Disk quotas dquot_6.6.0
[ 0.069690] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.070636] NET: Registered PF_INET protocol family
[ 0.070888] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.072323] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.072447] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.072489] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 0.072529] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.072674] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.072883] MPTCP token hash table entries: 512 (order: 1, 8192 bytes, linear)
[ 0.072953] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.072981] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.073238] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.073295] PCI: CLS 0 bytes, default 64
[ 0.075259] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.084228] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.188039] NET: Registered PF_ALG protocol family
[ 0.188203] io scheduler mq-deadline registered
[ 0.188216] io scheduler kyber registered
[ 0.188405] io scheduler bfq registered
[ 0.192398] qcom-pcie 1b500000.pci: supply vdda not found, using dummy regulator
[ 0.192658] qcom-pcie 1b500000.pci: supply vdda_phy not found, using dummy regulator
[ 0.192770] qcom-pcie 1b500000.pci: supply vdda_refclk not found, using dummy regulator
[ 0.193079] qcom-pcie 1b500000.pci: host bridge /soc/pci@1b500000 ranges:
[ 0.193131] qcom-pcie 1b500000.pci: Parsing ranges property...
[ 0.193176] qcom-pcie 1b500000.pci: IO 0x000fe00000..0x000fe0ffff -> 0x0000000000
[ 0.193217] qcom-pcie 1b500000.pci: MEM 0x0008000000..0x000fdfffff -> 0x0008000000
[ 0.311477] qcom-pcie 1b500000.pci: Using 32 MSI vectors
[ 0.311706] qcom-pcie 1b500000.pci: iATU unroll: disabled
[ 0.311720] qcom-pcie 1b500000.pci: iATU regions: 8 ob, 8 ib, align 4K, limit 4G
[ 0.409646] qcom-pcie 1b500000.pci: PCIe Gen.1 x1 link up
[ 0.409862] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[ 0.409880] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.409897] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.409911] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[ 0.409927] pci_bus 0000:00: scanning bus
[ 0.409983] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.410133] pci 0000:00:00.0: supports D1
[ 0.410146] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.410166] pci 0000:00:00.0: PME# disabled
[ 0.413939] pci_bus 0000:00: fixups for bus
[ 0.413960] PCI: bus0: Fast back to back transfers disabled
[ 0.413971] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[ 0.414119] pci_bus 0000:01: scanning bus
[ 0.414381] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.414670] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.416021] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.416074] pci 0000:01:00.0: PME# disabled
[ 0.416473] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
[ 0.417246] pci_bus 0000:01: fixups for bus
[ 0.417329] PCI: bus1: Fast back to back transfers disabled
[ 0.417339] pci_bus 0000:01: bus scan returning with max=01
[ 0.417356] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[ 0.417375] pci_bus 0000:00: bus scan returning with max=ff
[ 0.417403] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
[ 0.417431] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[ 0.417578] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.417599] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
[ 0.417801] pcieport 0000:00:00.0: assign IRQ: got 27
[ 0.417945] qcom-pcie 1b500000.pci: msi#0 address_hi 0x0 address_lo 0x43385000
[ 0.419403] pcieport 0000:00:00.0: AER: enabled with IRQ 28
[ 0.419672] pcieport 0000:00:00.0: saving config space at offset 0x0 (reading 0x10117cb)
[ 0.419693] pcieport 0000:00:00.0: saving config space at offset 0x4 (reading 0x100547)
[ 0.419706] pcieport 0000:00:00.0: saving config space at offset 0x8 (reading 0xff000000)
[ 0.419718] pcieport 0000:00:00.0: saving config space at offset 0xc (reading 0x10010)
[ 0.419729] pcieport 0000:00:00.0: saving config space at offset 0x10 (reading 0x0)
[ 0.419742] pcieport 0000:00:00.0: saving config space at offset 0x14 (reading 0x0)
[ 0.419755] pcieport 0000:00:00.0: saving config space at offset 0x18 (reading 0xff0100)
[ 0.419766] pcieport 0000:00:00.0: saving config space at offset 0x1c (reading 0xf0)
[ 0.419779] pcieport 0000:00:00.0: saving config space at offset 0x20 (reading 0x8100800)
[ 0.419790] pcieport 0000:00:00.0: saving config space at offset 0x24 (reading 0x1fff1)
[ 0.419802] pcieport 0000:00:00.0: saving config space at offset 0x28 (reading 0x0)
[ 0.419815] pcieport 0000:00:00.0: saving config space at offset 0x2c (reading 0x0)
[ 0.419826] pcieport 0000:00:00.0: saving config space at offset 0x30 (reading 0x0)
[ 0.419837] pcieport 0000:00:00.0: saving config space at offset 0x34 (reading 0x40)
[ 0.419850] pcieport 0000:00:00.0: saving config space at offset 0x38 (reading 0x0)
[ 0.419860] pcieport 0000:00:00.0: saving config space at offset 0x3c (reading 0x3011b)
[ 0.420689] qcom-pcie 1b700000.pci: supply vdda not found, using dummy regulator
[ 0.420957] qcom-pcie 1b700000.pci: supply vdda_phy not found, using dummy regulator
[ 0.421072] qcom-pcie 1b700000.pci: supply vdda_refclk not found, using dummy regulator
[ 0.421354] qcom-pcie 1b700000.pci: host bridge /soc/pci@1b700000 ranges:
[ 0.421398] qcom-pcie 1b700000.pci: Parsing ranges property...
[ 0.421452] qcom-pcie 1b700000.pci: IO 0x0031e00000..0x0031e0ffff -> 0x0000000000
[ 0.421495] qcom-pcie 1b700000.pci: MEM 0x002e000000..0x0031dfffff -> 0x002e000000
[ 0.541526] qcom-pcie 1b700000.pci: Using 32 MSI vectors
[ 0.541729] qcom-pcie 1b700000.pci: iATU unroll: disabled
[ 0.541742] qcom-pcie 1b700000.pci: iATU regions: 8 ob, 8 ib, align 4K, limit 4G
[ 0.639666] qcom-pcie 1b700000.pci: PCIe Gen.2 x1 link up
[ 0.639855] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[ 0.639871] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.639891] pci_bus 0001:00: root bus resource [io 0x10000-0x1ffff] (bus address [0x0000-0xffff])
[ 0.639906] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[ 0.639920] pci_bus 0001:00: scanning bus
[ 0.639968] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.640101] pci 0001:00:00.0: supports D1
[ 0.640115] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[ 0.640131] pci 0001:00:00.0: PME# disabled
[ 0.643883] pci_bus 0001:00: fixups for bus
[ 0.643903] PCI: bus0: Fast back to back transfers disabled
[ 0.643916] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[ 0.644063] pci_bus 0001:01: scanning bus
[ 0.644309] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.644581] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.645837] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.645887] pci 0001:01:00.0: PME# disabled
[ 0.646964] pci_bus 0001:01: fixups for bus
[ 0.647041] PCI: bus1: Fast back to back transfers disabled
[ 0.647051] pci_bus 0001:01: bus scan returning with max=01
[ 0.647065] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[ 0.647084] pci_bus 0001:00: bus scan returning with max=ff
[ 0.647115] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
[ 0.647143] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[ 0.647279] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 0.647303] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
[ 0.647530] pcieport 0001:00:00.0: assign IRQ: got 30
[ 0.647689] qcom-pcie 1b700000.pci: msi#0 address_hi 0x0 address_lo 0x433ab000
[ 0.648172] pcieport 0001:00:00.0: AER: enabled with IRQ 31
[ 0.648297] pcieport 0001:00:00.0: saving config space at offset 0x0 (reading 0x10117cb)
[ 0.648312] pcieport 0001:00:00.0: saving config space at offset 0x4 (reading 0x100547)
[ 0.648327] pcieport 0001:00:00.0: saving config space at offset 0x8 (reading 0xff000000)
[ 0.648340] pcieport 0001:00:00.0: saving config space at offset 0xc (reading 0x10010)
[ 0.648351] pcieport 0001:00:00.0: saving config space at offset 0x10 (reading 0x0)
[ 0.648362] pcieport 0001:00:00.0: saving config space at offset 0x14 (reading 0x0)
[ 0.648376] pcieport 0001:00:00.0: saving config space at offset 0x18 (reading 0xff0100)
[ 0.648388] pcieport 0001:00:00.0: saving config space at offset 0x1c (reading 0xf0)
[ 0.648401] pcieport 0001:00:00.0: saving config space at offset 0x20 (reading 0x2e102e00)
[ 0.648414] pcieport 0001:00:00.0: saving config space at offset 0x24 (reading 0x1fff1)
[ 0.648427] pcieport 0001:00:00.0: saving config space at offset 0x28 (reading 0x0)
[ 0.648439] pcieport 0001:00:00.0: saving config space at offset 0x2c (reading 0x0)
[ 0.648450] pcieport 0001:00:00.0: saving config space at offset 0x30 (reading 0x0)
[ 0.648463] pcieport 0001:00:00.0: saving config space at offset 0x34 (reading 0x40)
[ 0.648475] pcieport 0001:00:00.0: saving config space at offset 0x38 (reading 0x0)
[ 0.648486] pcieport 0001:00:00.0: saving config space at offset 0x3c (reading 0x3011e)
[ 0.652926] krait-cc soc:clock-controller: CPU0 @ 800000 KHz
[ 0.652948] krait-cc soc:clock-controller: CPU1 @ Undefined rate. Forcing new rate.
[ 0.653111] krait-cc soc:clock-controller: CPU1 @ 800000 KHz
[ 0.653125] krait-cc soc:clock-controller: L2 @ Undefined rate. Forcing new rate.
[ 0.653313] krait-cc soc:clock-controller: L2 @ 800000 KHz
[ 0.658177] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[ 0.660340] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.661650] msm_serial 16340000.serial: msm_serial: detected port #0
[ 0.661696] msm_serial 16340000.serial: uartclk = 7372800
[ 0.661814] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 35, base_baud = 460800) is a MSM
[ 0.661853] msm_serial: console setup on port #0
[ 0.665306] printk: console [ttyMSM0] enabled
[ 0.665411] printk: console [ttyMSM0] printing thread started
[ 0.665757] msm_serial: driver initialized
[ 0.670745] loop: module loaded
[ 0.672337] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
[ 0.672350] nand: AMD/Spansion S34MS01G2
[ 0.672356] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.029746] random: crng init done
[ 1.211991] found squashfs at 1380000 with len of 21889024 bytes
[ 1.752014] found squashfs at 3B80000 with len of 21889024 bytes
[ 1.752045] 19 fixed-partitions partitions found on MTD device qcom_nand.0
[ 1.752084] Creating 19 MTD partitions on "qcom_nand.0":
[ 1.752095] 0x000000000000-0x000000040000 : "SBL1"
[ 1.755262] 0x000000040000-0x000000180000 : "MIBIB"
[ 1.757727] 0x000000180000-0x0000002c0000 : "SBL2"
[ 1.760450] 0x0000002c0000-0x000000540000 : "SBL3"
[ 1.764852] 0x000000540000-0x000000660000 : "DDRCONFIG"
[ 1.767065] 0x000000660000-0x000000780000 : "SSD"
[ 1.769341] 0x000000780000-0x000000a00000 : "TZ"
[ 1.774179] 0x000000a00000-0x000000c80000 : "RPM"
[ 1.778602] 0x000000c80000-0x000000dc0000 : "art"
[ 1.781101] 0x000000dc0000-0x000000ec0000 : "APPSBL"
[ 1.783136] 0x000000ec0000-0x000000f00000 : "u_env"
[ 1.783990] 0x000000f00000-0x000000f40000 : "s_env"
[ 1.784806] 0x000000f40000-0x000000f80000 : "devinfo"
[ 1.785634] 0x000000f80000-0x000003780000 : "linux"
[ 1.849703] 0x000001380000-0x000002860000 : "rootfs"
[ 1.883446] mtd: setting mtd14 (rootfs) as root device
[ 1.883516] 0x000003780000-0x000005f40000 : "linux2"
[ 1.949494] 0x000003b80000-0x000005060000 : "rootfs2"
[ 1.984265] 0x000005f40000-0x000005f80000 : "nvram"
[ 1.985104] 0x000005f80000-0x000008000000 : "ddwrt"
[ 2.046931] qcom,boot-partition = 0:1900
[ 2.084253] switch0: Atheros AR8337 rev. 2 switch registered on 37000000.mdio-mii
[ 2.824603] ar8327: qca,phy-rgmii-en is not specified
[ 2.825151] PPP generic driver version 2.4.2
[ 2.825283] PPP BSD Compression module registered
[ 2.825296] PPP Deflate Compression module registered
[ 2.825799] PPP MPPE Compression module registered
[ 2.825812] NET: Registered PF_PPPOX protocol family
[ 2.826076] i2c_dev: i2c /dev entries driver
[ 2.831412] GACT probability NOT on
[ 2.831435] Mirror/redirect action on
[ 2.831504] Simple TC action Loaded
[ 2.832153] netem: version 1.3
[ 2.832274] u32 classifier
[ 2.832280] Performance counters on
[ 2.832283] input device check on
[ 2.832286] Actions configured
[ 2.886753] nf_conntrack_rtsp v0.7 loading
[ 2.887298] xt_time: kernel timezone is -0000
[ 2.887594] gre: GRE over IPv4 demultiplexor driver
[ 2.888260] NET: Registered PF_INET6 protocol family
[ 2.890002] Segment Routing with IPv6
[ 2.890036] In-situ OAM (IOAM) with IPv6
[ 2.890257] NET: Registered PF_PACKET protocol family
[ 2.890475] Bridge firewalling registered
[ 2.890483] 8021q: 802.1Q VLAN Support v1.8
[ 2.924183] Registering SWP/SWPB emulation handler
[ 2.957800] CPU: IPQ8064, SoC Version: 2.0 id: 202 fmt: 0
[ 2.959036] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
[ 2.984235] s1a: Bringing 0uV into 1050000-1050000uV
[ 2.984632] s1b: Bringing 0uV into 1050000-1050000uV
[ 2.984969] s2a: Bringing 0uV into 800000-800000uV
[ 2.985314] s2b: Bringing 0uV into 800000-800000uV
[ 2.989668] thermal thermal_zone0: failed to read out thermal zone (-110)
[ 3.012051] searching for nvram
[ 3.012076] nvram size = 262144
[ 3.064339] found nvram at 20000
[ 3.221819] UBI error: no valid UBI magic found inside mtd13
[ 3.222959] clk: Disabling unused clocks
[ 3.232856] VFS: Mounted root (squashfs filesystem) readonly on device 31:14.
[ 3.238931] Freeing unused kernel image (initmem) memory: 1024K
[ 3.239040] Run /sbin/init as init process
[ 3.239044] with arguments:
[ 3.239047] /sbin/init
[ 3.239049] with environment:
[ 3.239052] HOME=/
[ 3.239054] TERM=linux
[ 3.239058] nohz_full=all
[ 7.791223] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_wake_irq not found
[ 7.791234] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_lpi not found
[ 7.791385] ipq806x-gmac-dwmac 37200000.ethernet: PTP uses main clock
[ 7.791788] ipq806x-gmac-dwmac 37200000.ethernet: User ID: 0x10, Synopsys ID: 0x37
[ 7.791800] ipq806x-gmac-dwmac 37200000.ethernet: DWMAC1000
[ 7.791806] ipq806x-gmac-dwmac 37200000.ethernet: DMA HW capability register supported
[ 7.791811] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported
[ 7.791817] ipq806x-gmac-dwmac 37200000.ethernet: COE Type 2
[ 7.791822] ipq806x-gmac-dwmac 37200000.ethernet: TX Checksum insertion supported
[ 7.791826] ipq806x-gmac-dwmac 37200000.ethernet: Wake-Up On Lan supported
[ 7.791831] ipq806x-gmac-dwmac 37200000.ethernet: Enhanced/Alternate descriptors
[ 7.791836] ipq806x-gmac-dwmac 37200000.ethernet: Enabled extended descriptors
[ 7.791843] ipq806x-gmac-dwmac 37200000.ethernet: Ring mode enabled
[ 7.791849] ipq806x-gmac-dwmac 37200000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 7.791861] ipq806x-gmac-dwmac 37200000.ethernet: device MAC address d2:f3:2f:3c:3b:68
[ 7.793206] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_wake_irq not found
[ 7.793214] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_lpi not found
[ 7.793354] ipq806x-gmac-dwmac 37400000.ethernet: PTP uses main clock
[ 7.793863] ipq806x-gmac-dwmac 37400000.ethernet: User ID: 0x10, Synopsys ID: 0x37
[ 7.793879] ipq806x-gmac-dwmac 37400000.ethernet: DWMAC1000
[ 7.793884] ipq806x-gmac-dwmac 37400000.ethernet: DMA HW capability register supported
[ 7.793889] ipq806x-gmac-dwmac 37400000.ethernet: RX Checksum Offload Engine supported
[ 7.793893] ipq806x-gmac-dwmac 37400000.ethernet: COE Type 2
[ 7.793904] ipq806x-gmac-dwmac 37400000.ethernet: TX Checksum insertion supported
[ 7.793912] ipq806x-gmac-dwmac 37400000.ethernet: Wake-Up On Lan supported
[ 7.793920] ipq806x-gmac-dwmac 37400000.ethernet: Enhanced/Alternate descriptors
[ 7.793928] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors
[ 7.793937] ipq806x-gmac-dwmac 37400000.ethernet: Ring mode enabled
[ 7.793945] ipq806x-gmac-dwmac 37400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 7.793958] ipq806x-gmac-dwmac 37400000.ethernet: device MAC address 82:88:80:cb:5a:88
[ 9.198636] ipq806x-gmac-dwmac 37200000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 9.209388] dwmac1000: Master AXI performs any burst length
[ 9.209400] ipq806x-gmac-dwmac 37200000.ethernet eth0: No Safety Features support found
[ 9.219418] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 9.219536] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[ 9.231059] ipq806x-gmac-dwmac 37200000.ethernet eth0: configuring for fixed/rgmii link mode
[ 9.231345] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 9.231362] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 9.235610] ipq806x-gmac-dwmac 37400000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 9.246366] dwmac1000: Master AXI performs any burst length
[ 9.246376] ipq806x-gmac-dwmac 37400000.ethernet eth1: No Safety Features support found
[ 9.256393] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 9.256507] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 9.292685] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for fixed/sgmii link mode
[ 9.292966] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 9.292983] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 11.245838] device br0 entered promiscuous mode
[ 11.299849] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Down
[ 11.313327] ipq806x-gmac-dwmac 37400000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 11.324080] dwmac1000: Master AXI performs any burst length
[ 11.324091] ipq806x-gmac-dwmac 37400000.ethernet eth1: No Safety Features support found
[ 11.334107] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 11.334214] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 11.334226] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for fixed/sgmii link mode
[ 11.334391] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 11.369360] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Down
[ 11.381804] ipq806x-gmac-dwmac 37400000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 11.392610] dwmac1000: Master AXI performs any burst length
[ 11.392620] ipq806x-gmac-dwmac 37400000.ethernet eth1: No Safety Features support found
[ 11.402637] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 11.402751] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 11.402763] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for fixed/sgmii link mode
[ 11.403092] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 11.438439] br0: port 1(eth1) entered blocking state
[ 11.438452] br0: port 1(eth1) entered disabled state
[ 11.438650] device eth1 entered promiscuous mode
[ 11.438742] br0: port 1(eth1) entered blocking state
[ 11.438755] br0: port 1(eth1) entered forwarding state
[ 11.470086] device br0 left promiscuous mode
[ 11.473664] device br0 entered promiscuous mode
[ 11.513545] device br0 left promiscuous mode
[ 11.551944] Loading modules backported from Linux version v5.15.33-0-g06f50ca83ace
[ 11.551952] Backport generated by backports.git v5.15.33-1-0-g183c4ab2
[ 11.944441] ath10k_pci 0000:01:00.0: assign IRQ: got 27
[ 11.944992] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 11.945069] ath10k_pci 0000:01:00.0: enabling bus mastering
[ 11.945606] qcom-pcie 1b500000.pci: msi#1 address_hi 0x0 address_lo 0x43385000
[ 11.945778] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 12.275711] ath10k_pci 0000:01:00.0: found firmware features ie (8 B)
[ 12.275731] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
[ 12.275741] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[ 12.277955] ath10k_pci 0000:01:00.0: firmware ver 10.4-ddwrt-9980-tW-13-7768 api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate,superchannel crc32 57333134
[ 12.336054] ath10k_pci 0000:01:00.0: boot get otp board id result 0x00008800 board_id 2 chip_id 1 ext_bid_support 0
[ 12.339316] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=2'
[ 12.339326] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=2'
[ 12.369999] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:2 crc32 e4a0f655
[ 12.391173] ath10k_pci 0000:01:00.0: boot already acquired valid otp board id,skip download, board_id 2 chip_id 1
[ 12.411752] ath10k_pci 0000:01:00.0: boot upload otp to 0x1234 len 11240
[ 13.343022] ath10k_pci 0000:01:00.0: Init Max Stations to 64
[ 13.343650] ath10k_pci 0000:01:00.0: wmi event service ready min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000185b vht_cap 0x339b79b2 vht_supp_mcs 0x0000ffaa sw_ver0 0x01000000 sw_ver1 0x00000032 fw_build 0x00000000 phy_capab 0x00000002 num_rf_chains 0x00000004 eeprom_rd 0x00000000 low_2ghz_chan 2312 high_2ghz_chan 2500 low_5ghz_chan 4800 high_5ghz_chan 6115 num_mem_reqs 0x00000007 min_pkt_size_enable 0x00000000
[ 13.416319] ath10k_pci 0000:01:00.0: ChipType 1200 ChipTypeID 30 BoardID 1 P 80/80 V 16 K 160 PH 272 T 282 msdu-desc: 2500 sw-crypt: 0
[ 13.417193] ath10k_pci 0000:01:00.0: free: 23232 iram: 29408 sram: 19112
[ 13.417202] ath10k_pci 0000:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr 14:91:82:7d:ef:7d status 0
[ 13.466940] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 64 raw 0 hwcrypto 1
[ 13.554009] ath10k_pci 0000:01:00.0: init channel number 86
[ 13.554026] ath: EEPROM regdomain sanitized
[ 13.554030] ath: EEPROM regdomain: 0x64
[ 13.554033] ath: EEPROM indicates we should expect a direct regpair map
[ 13.554041] ath: Country alpha2 being used: 00
[ 13.554045] ath: Regpair used: 0x64
[ 13.554086] initialize fq_codel with 33554432 bytes memory limit
[ 13.554177] ieee80211_txq_setup_flows: set limit to 4194304 bytes
[ 13.558123] ath10k_pci 0001:01:00.0: assign IRQ: got 30
[ 13.558714] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[ 13.558800] ath10k_pci 0001:01:00.0: enabling bus mastering
[ 13.559298] qcom-pcie 1b700000.pci: msi#1 address_hi 0x0 address_lo 0x433ab000
[ 13.559458] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 13.730781] ath10k_pci 0001:01:00.0: found firmware features ie (8 B)
[ 13.730798] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
[ 13.730807] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[ 13.733257] ath10k_pci 0001:01:00.0: firmware ver 10.4-ddwrt-9980-tW-13-7768 api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate,superchannel crc32 57333134
[ 13.791128] ath10k_pci 0001:01:00.0: boot get otp board id result 0x00008400 board_id 1 chip_id 1 ext_bid_support 0
[ 13.794389] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=1'
[ 13.794399] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=1'
[ 13.795016] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:1 crc32 e4a0f655
[ 13.815865] ath10k_pci 0001:01:00.0: boot already acquired valid otp board id,skip download, board_id 1 chip_id 1
[ 13.836282] ath10k_pci 0001:01:00.0: boot upload otp to 0x1234 len 11240
[ 14.764014] ath10k_pci 0001:01:00.0: Init Max Stations to 64
[ 14.764630] ath10k_pci 0001:01:00.0: wmi event service ready min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000185b vht_cap 0x339b79b2 vht_supp_mcs 0x0000ffaa sw_ver0 0x01000000 sw_ver1 0x00000032 fw_build 0x00000000 phy_capab 0x00000001 num_rf_chains 0x00000004 eeprom_rd 0x00000000 low_2ghz_chan 2312 high_2ghz_chan 2500 low_5ghz_chan 4800 high_5ghz_chan 6115 num_mem_reqs 0x00000007 min_pkt_size_enable 0x00000000
[ 14.834249] ath10k_pci 0001:01:00.0: ChipType 1200 ChipTypeID 30 BoardID 2 P 80/80 V 16 K 160 PH 272 T 282 msdu-desc: 2500 sw-crypt: 0
[ 14.835103] ath10k_pci 0001:01:00.0: free: 23232 iram: 29408 sram: 19112
[ 14.835113] ath10k_pci 0001:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr 14:91:82:7d:ef:7d status 0
[ 14.865045] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 64 raw 0 hwcrypto 1
[ 14.954014] ath10k_pci 0001:01:00.0: init channel number 281
[ 14.954032] ath: EEPROM regdomain sanitized
[ 14.954035] ath: EEPROM regdomain: 0x64
[ 14.954039] ath: EEPROM indicates we should expect a direct regpair map
[ 14.954047] ath: Country alpha2 being used: 00
[ 14.954050] ath: Regpair used: 0x64
[ 14.954095] initialize fq_codel with 33554432 bytes memory limit
[ 14.954188] ieee80211_txq_setup_flows: set limit to 33554432 bytes
[ 15.340687] ath: EEPROM regdomain: 0x8348
[ 15.340696] ath: EEPROM indicates we should expect a country code
[ 15.340700] ath: doing EEPROM country->regdmn map search
[ 15.340704] ath: country maps to regdmn code: 0x3a
[ 15.340707] ath: Country alpha2 being used: US
[ 15.340711] ath: Regpair used: 0x3a
[ 15.340713] ath: regdomain 0x8348 dynamically updated by user
[ 15.340824] ath: EEPROM regdomain: 0x8348
[ 15.340827] ath: EEPROM indicates we should expect a country code
[ 15.340831] ath: doing EEPROM country->regdmn map search
[ 15.340834] ath: country maps to regdmn code: 0x3a
[ 15.340837] ath: Country alpha2 being used: US
[ 15.340840] ath: Regpair used: 0x3a
[ 15.340844] ath: regdomain 0x8348 dynamically updated by user
[ 15.343987] ath: EEPROM regdomain: 0x8348
[ 15.343993] ath: EEPROM indicates we should expect a country code
[ 15.343997] ath: doing EEPROM country->regdmn map search
[ 15.344000] ath: country maps to regdmn code: 0x3a
[ 15.344004] ath: Country alpha2 being used: US
[ 15.344007] ath: Regpair used: 0x3a
[ 15.344010] ath: regdomain 0x8348 dynamically updated by user
[ 15.348655] ath: EEPROM regdomain: 0x8348
[ 15.348661] ath: EEPROM indicates we should expect a country code
[ 15.348666] ath: doing EEPROM country->regdmn map search
[ 15.348670] ath: country maps to regdmn code: 0x3a
[ 15.348673] ath: Country alpha2 being used: US
[ 15.348676] ath: Regpair used: 0x3a
[ 15.348679] ath: regdomain 0x8348 dynamically updated by user
[ 15.368254] ath10k_pci 0001:01:00.0: user requested fw restart
[ 15.654194] ath10k_pci 0001:01:00.0: found firmware features ie (4 B)
[ 15.654214] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
[ 15.654224] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[ 15.656397] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.20-00008 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 ff0627af
[ 15.723760] ath10k_pci 0001:01:00.0: boot get otp board id result 0x00008400 board_id 1 chip_id 1 ext_bid_support 0
[ 15.727027] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=1'
[ 15.727037] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=1'
[ 15.727666] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:1 crc32 e4a0f655
[ 15.748584] ath10k_pci 0001:01:00.0: boot already acquired valid otp board id,skip download, board_id 1 chip_id 1
[ 15.769012] ath10k_pci 0001:01:00.0: boot upload otp to 0x1234 len 11241
[ 16.920114] ath10k_pci 0001:01:00.0: Init Max Stations to 512
[ 16.921608] ath10k_pci 0001:01:00.0: wmi event service ready min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000185b vht_cap 0x339b79b2 vht_supp_mcs 0x0000ffaa sw_ver0 0x01000000 sw_ver1 0x00000008 fw_build 0x00000000 phy_capab 0x00000001 num_rf_chains 0x00000004 eeprom_rd 0x00000000 low_2ghz_chan 2312 high_2ghz_chan 2732 low_5ghz_chan 4912 high_5ghz_chan 6100 num_mem_reqs 0x00000008 min_pkt_size_enable 0x00000000
[ 16.992596] ath10k_pci 0001:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr 14:91:82:7d:ef:7d status 0
[ 17.022161] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[ 17.114039] ath10k_pci 0001:01:00.0: init channel number 56
[ 17.136204] ath10k_pci 0001:01:00.0: Core CLK 300
[ 17.136218] ath10k_pci 0001:01:00.0: Mac CLK 150
[ 17.309829] ath10k_pci 0000:01:00.0: user requested fw restart
[ 17.390800] ath10k_pci 0000:01:00.0: found firmware features ie (4 B)
[ 17.390815] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
[ 17.390825] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[ 17.393252] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.20-00008 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 ff0627af
[ 17.451393] ath10k_pci 0000:01:00.0: boot get otp board id result 0x00008800 board_id 2 chip_id 1 ext_bid_support 0
[ 17.454657] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=2'
[ 17.454666] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=2'
[ 17.455283] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:2 crc32 e4a0f655
[ 17.476311] ath10k_pci 0000:01:00.0: boot already acquired valid otp board id,skip download, board_id 2 chip_id 1
[ 17.496840] ath10k_pci 0000:01:00.0: boot upload otp to 0x1234 len 11241
[ 18.652284] ath10k_pci 0000:01:00.0: Init Max Stations to 512
[ 18.653801] ath10k_pci 0000:01:00.0: wmi event service ready min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000185b vht_cap 0x339b79b2 vht_supp_mcs 0x0000ffaa sw_ver0 0x01000000 sw_ver1 0x00000008 fw_build 0x00000000 phy_capab 0x00000002 num_rf_chains 0x00000004 eeprom_rd 0x00000000 low_2ghz_chan 2312 high_2ghz_chan 2732 low_5ghz_chan 4912 high_5ghz_chan 6100 num_mem_reqs 0x00000008 min_pkt_size_enable 0x00000000
[ 18.727307] ath10k_pci 0000:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr 14:91:82:7d:ef:7d status 0
[ 18.757816] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[ 18.844016] ath10k_pci 0000:01:00.0: init channel number 14
[ 18.865872] ath10k_pci 0000:01:00.0: Core CLK 300
[ 18.865883] ath10k_pci 0000:01:00.0: Mac CLK 150
[ 20.098708] ath10k_pci 0001:01:00.0: boot get otp board id result 0x00008400 board_id 1 chip_id 1 ext_bid_support 0
[ 20.122374] ath10k_pci 0001:01:00.0: boot upload otp to 0x1234 len 11241
[ 21.273365] ath10k_pci 0001:01:00.0: Init Max Stations to 512
[ 21.273382] ath10k_pci 0001:01:00.0: wmi event service ready min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000185b vht_cap 0x339b79b2 vht_supp_mcs 0x0000ffaa sw_ver0 0x01000000 sw_ver1 0x00000008 fw_build 0x00000000 phy_capab 0x00000001 num_rf_chains 0x00000004 eeprom_rd 0x00000000 low_2ghz_chan 2312 high_2ghz_chan 2732 low_5ghz_chan 4912 high_5ghz_chan 6100 num_mem_reqs 0x00000008 min_pkt_size_enable 0x00000000
[ 21.344310] ath10k_pci 0001:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr 14:91:82:7d:ef:7d status 0
[ 21.431915] ath10k_pci 0001:01:00.0: Init Channel Number 56
[ 21.460923] ath10k_pci 0001:01:00.0: set base mac addr 14:91:82:7d:ef:80
[ 21.461535] ath10k_pci 0001:01:00.0: bdf failsafe status event received from fw: 0
[ 21.492012] wlan1: Failed to create a NSS virtual interface
[ 21.494051] br0: port 2(wlan1) entered blocking state
[ 21.494064] br0: port 2(wlan1) entered disabled state
[ 21.494257] device wlan1 entered promiscuous mode
[ 21.934764] ath10k_pci 0001:01:00.0: mac txpower 30
[ 22.248361] ath10k_pci 0001:01:00.0: mac txpower 30
[ 22.249754] br0: port 2(wlan1) entered blocking state
[ 22.249766] br0: port 2(wlan1) entered forwarding state
[ 22.458999] ath10k_pci 0000:01:00.0: boot get otp board id result 0x00008800 board_id 2 chip_id 1 ext_bid_support 0
[ 22.482825] ath10k_pci 0000:01:00.0: boot upload otp to 0x1234 len 11241
[ 23.637712] ath10k_pci 0000:01:00.0: Init Max Stations to 512
[ 23.637727] ath10k_pci 0000:01:00.0: wmi event service ready min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000185b vht_cap 0x339b79b2 vht_supp_mcs 0x0000ffaa sw_ver0 0x01000000 sw_ver1 0x00000008 fw_build 0x00000000 phy_capab 0x00000002 num_rf_chains 0x00000004 eeprom_rd 0x00000000 low_2ghz_chan 2312 high_2ghz_chan 2732 low_5ghz_chan 4912 high_5ghz_chan 6100 num_mem_reqs 0x00000008 min_pkt_size_enable 0x00000000
[ 23.711151] ath10k_pci 0000:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr 14:91:82:7d:ef:7d status 0
[ 23.812570] ath10k_pci 0000:01:00.0: Init Channel Number 14
[ 23.843316] ath10k_pci 0000:01:00.0: set base mac addr 14:91:82:7d:ef:7f
[ 23.843660] ath10k_pci 0000:01:00.0: bdf failsafe status event received from fw: 0
[ 23.874778] wlan0: Failed to create a NSS virtual interface
[ 23.876312] br0: port 3(wlan0) entered blocking state
[ 23.876323] br0: port 3(wlan0) entered disabled state
[ 23.876513] device wlan0 entered promiscuous mode
[ 23.925757] ath10k_pci 0000:01:00.0: mac txpower 17
[ 24.261638] ath10k_pci 0000:01:00.0: mac txpower 17
[ 24.262860] br0: port 3(wlan0) entered blocking state
[ 24.262871] br0: port 3(wlan0) entered forwarding state
[ 24.301807] br1: port 1(wlan0.1) entered blocking state
[ 24.301820] br1: port 1(wlan0.1) entered disabled state
[ 24.301985] device wlan0.1 entered promiscuous mode
[ 24.306514] ath10k_pci 0000:01:00.0: mac txpower 17
[ 24.313374] wlan0.1: Failed to create a NSS virtual interface
[ 24.313492] br1: port 1(wlan0.1) entered blocking state
[ 24.329670] br1: port 1(wlan0.1) entered blocking state
[ 24.374666] ath10k_pci 0000:01:00.0: mac txpower 17
[ 24.377948] ath10k_pci 0000:01:00.0: mac txpower 17
[ 24.465823] ath10k_pci 0001:01:00.0: Init Channel Number 25
[ 24.465891] ath10k_pci 0000:01:00.0: Init Channel Number 14
[ 24.466472] ath10k_pci 0000:01:00.0: bdf failsafe status event received from fw: 0
[ 24.466529] ath10k_pci 0001:01:00.0: bdf failsafe status event received from fw: 0
[ 24.494639] ath: EEPROM regdomain: 0x8348
[ 24.494649] ath: EEPROM indicates we should expect a country code
[ 24.494653] ath: doing EEPROM country->regdmn map search
[ 24.494656] ath: country maps to regdmn code: 0x3a
[ 24.494660] ath: Country alpha2 being used: US
[ 24.494663] ath: Regpair used: 0x3a
[ 24.494667] ath: regdomain 0x8348 dynamically updated by user
[ 24.494677] ath10k_pci 0001:01:00.0: Init Channel Number 34
[ 24.494724] ath: EEPROM regdomain: 0x8348
[ 24.494728] ath: EEPROM indicates we should expect a country code
[ 24.494732] ath: doing EEPROM country->regdmn map search
[ 24.494735] ath: country maps to regdmn code: 0x3a
[ 24.494738] ath: Country alpha2 being used: US
[ 24.494741] ath: Regpair used: 0x3a
[ 24.494743] ath: regdomain 0x8348 dynamically updated by user
[ 24.494749] ath10k_pci 0000:01:00.0: Init Channel Number 11
[ 24.495400] ath10k_pci 0000:01:00.0: bdf failsafe status event received from fw: 0
[ 24.495465] ath10k_pci 0001:01:00.0: bdf failsafe status event received from fw: 0
[ 24.498950] ath: EEPROM regdomain: 0x8348
[ 24.498957] ath: EEPROM indicates we should expect a country code
[ 24.498961] ath: doing EEPROM country->regdmn map search
[ 24.498966] ath: country maps to regdmn code: 0x3a
[ 24.498969] ath: Country alpha2 being used: US
[ 24.498972] ath: Regpair used: 0x3a
[ 24.498975] ath: regdomain 0x8348 dynamically updated by user
[ 24.498981] ath10k_pci 0000:01:00.0: Init Channel Number 11
[ 24.499402] ath10k_pci 0000:01:00.0: bdf failsafe status event received from fw: 0
[ 24.533229] ath: EEPROM regdomain: 0x8348
[ 24.533236] ath: EEPROM indicates we should expect a country code
[ 24.533240] ath: doing EEPROM country->regdmn map search
[ 24.533245] ath: country maps to regdmn code: 0x3a
[ 24.533250] ath: Country alpha2 being used: US
[ 24.533254] ath: Regpair used: 0x3a
[ 24.533257] ath: regdomain 0x8348 dynamically updated by user
[ 24.533266] ath10k_pci 0001:01:00.0: Init Channel Number 31
[ 24.533857] ath10k_pci 0001:01:00.0: bdf failsafe status event received from fw: 0
[ 24.537466] ath10k_pci 0000:01:00.0: mac txpower 17
[ 24.538159] ath10k_pci 0000:01:00.0: mac txpower 17
[ 24.563256] device wlan1 left promiscuous mode
[ 24.563324] br0: port 2(wlan1) entered disabled state
[ 24.730341] ath10k_pci 0000:01:00.0: mac txpower 17
[ 24.732203] br1: port 1(wlan0.1) entered disabled state
[ 24.769913] device wlan0.1 left promiscuous mode
[ 24.769928] br1: port 1(wlan0.1) entered disabled state
[ 24.827393] device wlan0 left promiscuous mode
[ 24.827466] br0: port 3(wlan0) entered disabled state
[ 25.888708] ath10k_pci 0001:01:00.0: boot get otp board id result 0x00008400 board_id 1 chip_id 1 ext_bid_support 0
[ 25.912383] ath10k_pci 0001:01:00.0: boot upload otp to 0x1234 len 11241
[ 27.063459] ath10k_pci 0001:01:00.0: Init Max Stations to 512
[ 27.063475] ath10k_pci 0001:01:00.0: wmi event service ready min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000185b vht_cap 0x339b79b2 vht_supp_mcs 0x0000ffaa sw_ver0 0x01000000 sw_ver1 0x00000008 fw_build 0x00000000 phy_capab 0x00000001 num_rf_chains 0x00000004 eeprom_rd 0x00000000 low_2ghz_chan 2312 high_2ghz_chan 2732 low_5ghz_chan 4912 high_5ghz_chan 6100 num_mem_reqs 0x00000008 min_pkt_size_enable 0x00000000
[ 27.134468] ath10k_pci 0001:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr 14:91:82:7d:ef:7d status 0
[ 27.221963] ath10k_pci 0001:01:00.0: Init Channel Number 31
[ 27.251552] ath10k_pci 0001:01:00.0: bdf failsafe status event received from fw: 0
[ 27.251642] ath10k_pci 0001:01:00.0: set base mac addr 14:91:82:7d:ef:80
[ 27.281696] wlan1: Failed to create a NSS virtual interface
[ 27.283750] br0: port 2(wlan1) entered blocking state
[ 27.283761] br0: port 2(wlan1) entered disabled state
[ 27.283955] device wlan1 entered promiscuous mode
[ 27.361248] ath10k_pci 0001:01:00.0: mac txpower 30
[ 27.674219] ath10k_pci 0001:01:00.0: mac txpower 30
[ 27.674561] br0: port 2(wlan1) entered blocking state
[ 27.674573] br0: port 2(wlan1) entered forwarding state
[ 27.858988] ath10k_pci 0000:01:00.0: boot get otp board id result 0x00008800 board_id 2 chip_id 1 ext_bid_support 0
[ 27.882796] ath10k_pci 0000:01:00.0: boot upload otp to 0x1234 len 11241
[ 29.037641] ath10k_pci 0000:01:00.0: Init Max Stations to 512
[ 29.037657] ath10k_pci 0000:01:00.0: wmi event service ready min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000185b vht_cap 0x339b79b2 vht_supp_mcs 0x0000ffaa sw_ver0 0x01000000 sw_ver1 0x00000008 fw_build 0x00000000 phy_capab 0x00000002 num_rf_chains 0x00000004 eeprom_rd 0x00000000 low_2ghz_chan 2312 high_2ghz_chan 2732 low_5ghz_chan 4912 high_5ghz_chan 6100 num_mem_reqs 0x00000008 min_pkt_size_enable 0x00000000
[ 29.111078] ath10k_pci 0000:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr 14:91:82:7d:ef:7d status 0
[ 29.208365] ath10k_pci 0000:01:00.0: Init Channel Number 11
[ 29.357317] ath10k_pci 0000:01:00.0: set base mac addr 14:91:82:7d:ef:7f
[ 29.357661] ath10k_pci 0000:01:00.0: bdf failsafe status event received from fw: 0
[ 29.390045] wlan0: Failed to create a NSS virtual interface
[ 29.391560] br0: port 3(wlan0) entered blocking state
[ 29.391572] br0: port 3(wlan0) entered disabled state
[ 29.391759] device wlan0 entered promiscuous mode
[ 29.444819] ath10k_pci 0000:01:00.0: mac txpower 17
[ 29.780891] ath10k_pci 0000:01:00.0: mac txpower 17
[ 29.782116] br0: port 3(wlan0) entered blocking state
[ 29.782127] br0: port 3(wlan0) entered forwarding state
[ 29.834452] br1: port 1(wlan0.1) entered blocking state
[ 29.834468] br1: port 1(wlan0.1) entered disabled state
[ 29.834634] device wlan0.1 entered promiscuous mode
[ 29.841391] ath10k_pci 0000:01:00.0: mac txpower 17
[ 29.848284] wlan0.1: Failed to create a NSS virtual interface
[ 29.848416] br1: port 1(wlan0.1) entered blocking state
[ 29.864585] br1: port 1(wlan0.1) entered blocking state
[ 29.903934] ath10k_pci 0000:01:00.0: mac txpower 17
[ 29.915900] ath10k_pci 0000:01:00.0: mac txpower 17
[ 29.995695] ath10k_pci 0001:01:00.0: Init Channel Number 25
[ 29.995740] ath10k_pci 0000:01:00.0: Init Channel Number 14
[ 29.996415] ath10k_pci 0001:01:00.0: bdf failsafe status event received from fw: 0
[ 29.996914] ath10k_pci 0000:01:00.0: bdf failsafe status event received from fw: 0
[ 30.008195] ath: EEPROM regdomain: 0x8348
[ 30.008204] ath: EEPROM indicates we should expect a country code
[ 30.008208] ath: doing EEPROM country->regdmn map search
[ 30.008211] ath: country maps to regdmn code: 0x3a
[ 30.008214] ath: Country alpha2 being used: US
[ 30.008218] ath: Regpair used: 0x3a
[ 30.008220] ath: regdomain 0x8348 dynamically updated by user
[ 30.008229] ath10k_pci 0001:01:00.0: Init Channel Number 34
[ 30.008274] ath: EEPROM regdomain: 0x8348
[ 30.008278] ath: EEPROM indicates we should expect a country code
[ 30.008282] ath: doing EEPROM country->regdmn map search
[ 30.008286] ath: country maps to regdmn code: 0x3a
[ 30.008290] ath: Country alpha2 being used: US
[ 30.008292] ath: Regpair used: 0x3a
[ 30.008295] ath: regdomain 0x8348 dynamically updated by user
[ 30.008300] ath10k_pci 0000:01:00.0: Init Channel Number 11
[ 30.011138] ath10k_pci 0000:01:00.0: bdf failsafe status event received from fw: 0
[ 30.011210] ath10k_pci 0001:01:00.0: bdf failsafe status event received from fw: 0
[ 30.013592] ath: EEPROM regdomain: 0x8348
[ 30.013598] ath: EEPROM indicates we should expect a country code
[ 30.013602] ath: doing EEPROM country->regdmn map search
[ 30.013604] ath: country maps to regdmn code: 0x3a
[ 30.013608] ath: Country alpha2 being used: US
[ 30.013610] ath: Regpair used: 0x3a
[ 30.013613] ath: regdomain 0x8348 dynamically updated by user
[ 30.013620] ath10k_pci 0000:01:00.0: Init Channel Number 11
[ 30.021278] ath: EEPROM regdomain: 0x8348
[ 30.021285] ath: EEPROM indicates we should expect a country code
[ 30.021290] ath: doing EEPROM country->regdmn map search
[ 30.021294] ath: country maps to regdmn code: 0x3a
[ 30.021297] ath: Country alpha2 being used: US
[ 30.021301] ath: Regpair used: 0x3a
[ 30.021304] ath: regdomain 0x8348 dynamically updated by user
[ 30.021310] ath10k_pci 0001:01:00.0: Init Channel Number 31
[ 30.024853] ath10k_pci 0000:01:00.0: bdf failsafe status event received from fw: 0
[ 30.024956] ath10k_pci 0001:01:00.0: bdf failsafe status event received from fw: 0
[ 30.072897] ath10k_pci 0000:01:00.0: mac txpower 17
[ 30.072920] ath10k_pci 0000:01:00.0: mac txpower 17
[ 30.616444] device eth0 entered promiscuous mode
[ 32.891192] ksmbd: unknown parameter 'connlimit' ignored
[ 33.437322] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Down
[ 33.444792] ipq806x-gmac-dwmac 37200000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 33.455539] dwmac1000: Master AXI performs any burst length
[ 33.455551] ipq806x-gmac-dwmac 37200000.ethernet eth0: No Safety Features support found
[ 33.465569] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 33.465682] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[ 33.465695] ipq806x-gmac-dwmac 37200000.ethernet eth0: configuring for fixed/rgmii link mode
[ 33.465749] device eth0 left promiscuous mode
[ 33.466204] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 34.434794] usbcore: registered new interface driver usbfs
[ 34.434844] usbcore: registered new interface driver hub
[ 34.434903] usbcore: registered new device driver usb
[ 34.933156] tun: Universal TUN/TAP device driver, 1.6
[ 35.324897] OpenVPN data channel offload (ovpn-dco) 2.0.0 -- (C) 2020-2023 OpenVPN, Inc.
[ 35.429384] cryptodev: driver 1.14 loaded.
[ 35.568535] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 35.568566] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 35.568716] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000008002010010
[ 35.568769] xhci-hcd xhci-hcd.0.auto: irq 48, io mem 0x11000000
[ 35.568947] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 35.568964] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 35.568976] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 35.569633] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 35.569642] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 35.569649] usb usb1: Product: xHCI Host Controller
[ 35.569654] usb usb1: Manufacturer: Linux 6.1.129-rt28 xhci-hcd
[ 35.569658] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 35.569976] hub 1-0:1.0: USB hub found
[ 35.570011] hub 1-0:1.0: 1 port detected
[ 35.570649] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 35.570800] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[ 35.570809] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 35.570815] usb usb2: Product: xHCI Host Controller
[ 35.570820] usb usb2: Manufacturer: Linux 6.1.129-rt28 xhci-hcd
[ 35.570824] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 35.571113] hub 2-0:1.0: USB hub found
[ 35.571145] hub 2-0:1.0: 1 port detected
[ 35.638671] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 35.638695] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 35.638851] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000008002010010
[ 35.638897] xhci-hcd xhci-hcd.1.auto: irq 49, io mem 0x10000000
[ 35.639086] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 35.639099] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 35.639109] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 35.640291] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 35.640302] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 35.640309] usb usb3: Product: xHCI Host Controller
[ 35.640313] usb usb3: Manufacturer: Linux 6.1.129-rt28 xhci-hcd
[ 35.640318] usb usb3: SerialNumber: xhci-hcd.1.auto
[ 35.640635] hub 3-0:1.0: USB hub found
[ 35.640673] hub 3-0:1.0: 1 port detected
[ 35.641028] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 35.641179] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[ 35.641188] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 35.641194] usb usb4: Product: xHCI Host Controller
[ 35.641199] usb usb4: Manufacturer: Linux 6.1.129-rt28 xhci-hcd
[ 35.641204] usb usb4: SerialNumber: xhci-hcd.1.auto
[ 35.641469] hub 4-0:1.0: USB hub found
[ 35.641506] hub 4-0:1.0: 1 port detected
[ 35.949697] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 36.959730] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 36.990822] usb 2-1: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00
[ 36.990834] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 36.990840] usb 2-1: Product: Flash Drive
[ 36.990845] usb 2-1: Manufacturer: Samsung
[ 36.990850] usb 2-1: SerialNumber: 0373819090017746
[ 41.081548] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 41.081566] usb usb4: USB disconnect, device number 1
[ 41.082117] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered
[ 41.082146] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 41.082161] usb usb3: USB disconnect, device number 1
[ 41.083082] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered
[ 41.083161] xhci-hcd xhci-hcd.0.auto: remove, state 1
[ 41.083172] usb usb2: USB disconnect, device number 1
[ 41.083187] usb 2-1: USB disconnect, device number 2
[ 41.084307] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
[ 41.084330] xhci-hcd xhci-hcd.0.auto: remove, state 1
[ 41.084340] usb usb1: USB disconnect, device number 1
[ 41.085180] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
[ 41.183690] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 41.183717] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 41.183871] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000008002010010
[ 41.183901] xhci-hcd xhci-hcd.0.auto: irq 48, io mem 0x11000000
[ 41.184105] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 41.184119] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 41.184129] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 41.184343] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 41.184353] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 41.184360] usb usb1: Product: xHCI Host Controller
[ 41.184364] usb usb1: Manufacturer: Linux 6.1.129-rt28 xhci-hcd
[ 41.184369] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 41.185138] hub 1-0:1.0: USB hub found
[ 41.185184] hub 1-0:1.0: 1 port detected
[ 41.185530] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 41.185833] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[ 41.185844] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 41.185852] usb usb2: Product: xHCI Host Controller
[ 41.185858] usb usb2: Manufacturer: Linux 6.1.129-rt28 xhci-hcd
[ 41.185874] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 41.186242] hub 2-0:1.0: USB hub found
[ 41.186286] hub 2-0:1.0: 1 port detected
[ 41.186690] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 41.186715] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 41.186858] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000008002010010
[ 41.186884] xhci-hcd xhci-hcd.1.auto: irq 49, io mem 0x10000000
[ 41.187071] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 41.187087] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 41.187099] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 41.187304] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 41.187316] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 41.187322] usb usb3: Product: xHCI Host Controller
[ 41.187327] usb usb3: Manufacturer: Linux 6.1.129-rt28 xhci-hcd
[ 41.187331] usb usb3: SerialNumber: xhci-hcd.1.auto
[ 41.187641] hub 3-0:1.0: USB hub found
[ 41.187678] hub 3-0:1.0: 1 port detected
[ 41.188038] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 41.188196] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[ 41.188207] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 41.188213] usb usb4: Product: xHCI Host Controller
[ 41.188218] usb usb4: Manufacturer: Linux 6.1.129-rt28 xhci-hcd
[ 41.188223] usb usb4: SerialNumber: xhci-hcd.1.auto
[ 41.188571] hub 4-0:1.0: USB hub found
[ 41.188610] hub 4-0:1.0: 1 port detected
[ 41.381038] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 41.494293] SCSI subsystem initialized
[ 41.550435] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 41.580858] usb 2-1: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00
[ 41.580873] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 41.580879] usb 2-1: Product: Flash Drive
[ 41.580884] usb 2-1: Manufacturer: Samsung
[ 41.580889] usb 2-1: SerialNumber: 0373819090017746
[ 42.147056] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 42.147410] scsi host0: usb-storage 2-1:1.0
[ 42.147697] usbcore: registered new interface driver usb-storage
[ 42.160347] usbcore: registered new interface driver uas
[ 42.221374] libata version 3.00 loaded.
[ 42.487500] ahci 29000000.sata: supply ahci not found, using dummy regulator
[ 42.487663] ahci 29000000.sata: supply phy not found, using dummy regulator
[ 42.487802] ahci 29000000.sata: supply target not found, using dummy regulator
[ 42.488373] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
[ 42.488405] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 42.488415] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
[ 42.489110] scsi host1: ahci
[ 42.489486] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 50
[ 42.821052] ata1: SATA link down (SStatus 0 SControl 300)
[ 43.210136] sdhci: Secure Digital Host Controller Interface driver
[ 43.210144] sdhci: Copyright(c) Pierre Ossman
[ 43.416747] scsi 0:0:0:0: Direct-Access Samsung Flash Drive 1100 PQ: 0 ANSI: 6
[ 43.418147] sd 0:0:0:0: [sda] 62656641 512-byte logical blocks: (32.1 GB/29.9 GiB)
[ 43.418316] sd 0:0:0:0: [sda] Write Protect is off
[ 43.418325] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 43.418491] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 44.906055] sda: sda1
[ 44.906277] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 44.919817] sdhci-pltfm: SDHCI platform and OF driver helper
[ 45.265307] ksmbd: kill command received
[ 46.719070] EXT4-fs: Ignoring removed nobh option
[ 46.732512] EXT4-fs (sda1): barriers disabled
[ 46.975497] ksmbd: unknown parameter 'connlimit' ignored
[ 47.095828] EXT4-fs (sda1): recovery complete
[ 47.096266] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none.
[ 48.929932] br1: port 1(wlan0.1) entered learning state
[ 63.929908] br1: port 1(wlan0.1) entered forwarding state
[ 668.505975] tun2: ovpn_netlink_new_peer: adding peer with endpoint=174.226.185.197:64039/UDP id=0 VPN-IPv4=10.172.128.242 VPN-IPv6=::
[ 668.514980] tun2: ovpn_netlink_new_key: new key installed (id=0) for peer 0
[ 960.529640] tun2: deleting peer with id 0, reason 2
root@Citadel-Station-Homeworld:~# uptime
20:47:37 up 1:59, load average: 0.00, 0.00, 0.00
root@Citadel-Station-Homeworld:~# date
Thu Feb 27 20:47:39 CST 2025
root@Citadel-Station-Homeworld:~#
Connection to citadel-station-homeworld.mrjcd.com closed.
mrjcd@daDeb:~$