mrjcd@daDeb:~$ telnet 192.168.1.1
Trying 192.168.1.1...
Connected to 192.168.1.1.
Escape character is '^]'.

DD-WRT v3.0-r55723 std (c) 2024 NewMedia-NET GmbH
Release: 04/09/24
Board: Linksys EA8500

DD-WRT login: root
Password: 
==========================================================
 
     ___  ___     _      _____  ______       ____  ___ 
    / _ \/ _ \___| | /| / / _ \/_  __/ _  __|_  / / _ \
   / // / // /___/ |/ |/ / , _/ / /   | |/ //_ <_/ // /
  /____/____/    |__/|__/_/|_| /_/    |___/____(_)___/ 
                                                     
                       DD-WRT v3.0
                   https://www.dd-wrt.com


==========================================================


BusyBox v1.36.1 (2024-04-09 06:14:27 +07) built-in shell (ash)

root@DD-WRT:~# uptime && date
 14:03:24 up 1 min,  load average: 0.25, 0.14, 0.05
Tue Apr  9 14:03:24 CDT 2024
root@DD-WRT:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 6.1.84 (root@server2) (arm-openwrt-linux-gcc (OpenWrt GCC 13.2.0 r24111-66f6c20e45) 13.2.0, GNU ld (GNU Binutils) 2.41) #127 SMP Mon Apr  8 13:24:06 +07 2024
[    0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] OF: fdt: Machine model: Linksys EA8500 WiFi Router
[    0.000000] OF: fdt: Ignoring memory range 0x41500000 - 0x42000000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000042000000-0x000000005fffffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000042000000-0x000000005fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000042000000-0x000000005fffffff]
[    0.000000] percpu: Embedded 12 pages/cpu s17652 r8192 d23308 u49152
[    0.000000] pcpu-alloc: s17652 r8192 d23308 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 121920
[    0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:16
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 471616K/491520K available (8180K kernel code, 807K rwdata, 2256K rodata, 1024K init, 2309K bss, 19904K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[    0.000001] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[    0.000024] Switching to timer-based delay loop, resolution 160ns
[    0.000267] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000278] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000287] ... MAX_LOCK_DEPTH:          48
[    0.000296] ... MAX_LOCKDEP_KEYS:        8192
[    0.000304] ... CLASSHASH_SIZE:          4096
[    0.000314] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.000323] ... MAX_LOCKDEP_CHAINS:      65536
[    0.000331] ... CHAINHASH_SIZE:          32768
[    0.000341]  memory used by lock dependency info: 1861 kB
[    0.000351]  per task-struct memory footprint: 1536 bytes
[    0.000420] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[    0.000450] CPU: Testing write buffer coherency: ok
[    0.000535] pid_max: default: 32768 minimum: 301
[    0.001346] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.001372] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.004085] qcom_scm: convention: smc legacy
[    0.005868] Setting up static identity map for 0x42300000 - 0x42300060
[    0.006196] rcu: Hierarchical SRCU implementation.
[    0.006209] rcu:     Max phase no-delay instances is 1000.
[    0.007633] smp: Bringing up secondary CPUs ...
[    0.010975] smp: Brought up 1 node, 2 CPUs
[    0.010994] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[    0.011011] CPU: All CPU(s) started in SVC mode.
[    0.037484] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[    0.037912] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.037950] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.038363] pinctrl core: initialized pinctrl subsystem
[    0.042457] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.043167] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.046710] thermal_sys: Registered thermal governor 'step_wise'
[    0.047027] cpuidle: using governor ladder
[    0.047171] cpuidle: using governor menu
[    0.111562] cryptd: max_cpu_qlen set to 1000
[    0.116258] pps_core: LinuxPPS API ver. 1 registered
[    0.116275] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.116335] PTP clock support registered
[    0.119702] mctp: management component transport protocol core
[    0.119719] NET: Registered PF_MCTP protocol family
[    0.120918] clocksource: Switched to clocksource dg_timer
[    0.122011] VFS: Disk quotas dquot_6.6.0
[    0.122183] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.124637] NET: Registered PF_INET protocol family
[    0.124990] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.127163] tcp_listen_portaddr_hash hash table entries: 256 (order: 1, 10240 bytes, linear)
[    0.127247] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.127288] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    0.127412] TCP bind hash table entries: 4096 (order: 6, 327680 bytes, linear)
[    0.128961] TCP: Hash tables configured (established 4096 bind 4096)
[    0.129708] MPTCP token hash table entries: 512 (order: 2, 24576 bytes, linear)
[    0.129956] UDP hash table entries: 256 (order: 2, 24576 bytes, linear)
[    0.130099] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes, linear)
[    0.130719] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.130905] PCI: CLS 0 bytes, default 64
[    0.139635] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[    0.156561] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.272865] qcom-pcie 1b500000.pci: supply vdda not found, using dummy regulator
[    0.273452] qcom-pcie 1b500000.pci: supply vdda_phy not found, using dummy regulator
[    0.273729] qcom-pcie 1b500000.pci: supply vdda_refclk not found, using dummy regulator
[    0.274334] qcom-pcie 1b500000.pci: host bridge /soc/pci@1b500000 ranges:
[    0.274403] qcom-pcie 1b500000.pci: Parsing ranges property...
[    0.274474] qcom-pcie 1b500000.pci:       IO 0x000fe00000..0x000fe0ffff -> 0x0000000000
[    0.274600] qcom-pcie 1b500000.pci:      MEM 0x0008000000..0x000fdfffff -> 0x0008000000
[    0.393927] qcom-pcie 1b500000.pci: Using 32 MSI vectors
[    0.394326] qcom-pcie 1b500000.pci: iATU unroll: disabled
[    0.394344] qcom-pcie 1b500000.pci: iATU regions: 8 ob, 8 ib, align 4K, limit 4G
[    0.497161] qcom-pcie 1b500000.pci: PCIe Gen.1 x1 link up
[    0.497582] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[    0.497608] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.497632] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.497650] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[    0.497670] pci_bus 0000:00: scanning bus
[    0.497845] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
[    0.498102] pci 0000:00:00.0: supports D1
[    0.498122] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.498195] pci 0000:00:00.0: PME# disabled
[    0.502166] pci_bus 0000:00: fixups for bus
[    0.502201] PCI: bus0: Fast back to back transfers disabled
[    0.502224] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[    0.502477] pci_bus 0000:01: scanning bus
[    0.502758] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
[    0.503061] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    0.504468] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.504525] pci 0000:01:00.0: PME# disabled
[    0.504947] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
[    0.505995] pci_bus 0000:01: fixups for bus
[    0.506085] PCI: bus1: Fast back to back transfers disabled
[    0.506104] pci_bus 0000:01: bus scan returning with max=01
[    0.506129] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[    0.506156] pci_bus 0000:00: bus scan returning with max=ff
[    0.506192] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
[    0.506226] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[    0.506380] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    0.506410] pci 0000:00:00.0:   bridge window [mem 0x08000000-0x081fffff]
[    0.506813] pcieport 0000:00:00.0: assign IRQ: got 27
[    0.507259] qcom-pcie 1b500000.pci: msi#0 address_hi 0x0 address_lo 0x437f9000
[    0.508285] pcieport 0000:00:00.0: AER: enabled with IRQ 28
[    0.508495] pcieport 0000:00:00.0: saving config space at offset 0x0 (reading 0x10117cb)
[    0.508518] pcieport 0000:00:00.0: saving config space at offset 0x4 (reading 0x100547)
[    0.508536] pcieport 0000:00:00.0: saving config space at offset 0x8 (reading 0xff000000)
[    0.508553] pcieport 0000:00:00.0: saving config space at offset 0xc (reading 0x10010)
[    0.508570] pcieport 0000:00:00.0: saving config space at offset 0x10 (reading 0x0)
[    0.508588] pcieport 0000:00:00.0: saving config space at offset 0x14 (reading 0x0)
[    0.508605] pcieport 0000:00:00.0: saving config space at offset 0x18 (reading 0xff0100)
[    0.508623] pcieport 0000:00:00.0: saving config space at offset 0x1c (reading 0xf0)
[    0.508640] pcieport 0000:00:00.0: saving config space at offset 0x20 (reading 0x8100800)
[    0.508656] pcieport 0000:00:00.0: saving config space at offset 0x24 (reading 0x1fff1)
[    0.508676] pcieport 0000:00:00.0: saving config space at offset 0x28 (reading 0x0)
[    0.508693] pcieport 0000:00:00.0: saving config space at offset 0x2c (reading 0x0)
[    0.508711] pcieport 0000:00:00.0: saving config space at offset 0x30 (reading 0x0)
[    0.508731] pcieport 0000:00:00.0: saving config space at offset 0x34 (reading 0x40)
[    0.508748] pcieport 0000:00:00.0: saving config space at offset 0x38 (reading 0x0)
[    0.508766] pcieport 0000:00:00.0: saving config space at offset 0x3c (reading 0x3011b)
[    0.509973] qcom-pcie 1b700000.pci: supply vdda not found, using dummy regulator
[    0.510500] qcom-pcie 1b700000.pci: supply vdda_phy not found, using dummy regulator
[    0.510715] qcom-pcie 1b700000.pci: supply vdda_refclk not found, using dummy regulator
[    0.511374] qcom-pcie 1b700000.pci: host bridge /soc/pci@1b700000 ranges:
[    0.511433] qcom-pcie 1b700000.pci: Parsing ranges property...
[    0.511511] qcom-pcie 1b700000.pci:       IO 0x0031e00000..0x0031e0ffff -> 0x0000000000
[    0.511569] qcom-pcie 1b700000.pci:      MEM 0x002e000000..0x0031dfffff -> 0x002e000000
[    0.634044] qcom-pcie 1b700000.pci: Using 32 MSI vectors
[    0.634371] qcom-pcie 1b700000.pci: iATU unroll: disabled
[    0.634392] qcom-pcie 1b700000.pci: iATU regions: 8 ob, 8 ib, align 4K, limit 4G
[    0.737147] qcom-pcie 1b700000.pci: PCIe Gen.2 x1 link up
[    0.737448] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[    0.737472] pci_bus 0001:00: root bus resource [bus 00-ff]
[    0.737498] pci_bus 0001:00: root bus resource [io  0x10000-0x1ffff] (bus address [0x0000-0xffff])
[    0.737516] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[    0.737535] pci_bus 0001:00: scanning bus
[    0.737605] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
[    0.737792] pci 0001:00:00.0: supports D1
[    0.737808] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[    0.737832] pci 0001:00:00.0: PME# disabled
[    0.741721] pci_bus 0001:00: fixups for bus
[    0.741752] PCI: bus0: Fast back to back transfers disabled
[    0.741772] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[    0.742098] pci_bus 0001:01: scanning bus
[    0.742363] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
[    0.742649] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    0.743963] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[    0.744017] pci 0001:01:00.0: PME# disabled
[    0.745428] pci_bus 0001:01: fixups for bus
[    0.745516] PCI: bus1: Fast back to back transfers disabled
[    0.745535] pci_bus 0001:01: bus scan returning with max=01
[    0.745558] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[    0.745585] pci_bus 0001:00: bus scan returning with max=ff
[    0.745620] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
[    0.745650] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[    0.745794] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    0.745823] pci 0001:00:00.0:   bridge window [mem 0x2e000000-0x2e1fffff]
[    0.746155] pcieport 0001:00:00.0: assign IRQ: got 30
[    0.746400] qcom-pcie 1b700000.pci: msi#0 address_hi 0x0 address_lo 0x43c01000
[    0.747222] pcieport 0001:00:00.0: AER: enabled with IRQ 31
[    0.747511] pcieport 0001:00:00.0: saving config space at offset 0x0 (reading 0x10117cb)
[    0.747535] pcieport 0001:00:00.0: saving config space at offset 0x4 (reading 0x100547)
[    0.747555] pcieport 0001:00:00.0: saving config space at offset 0x8 (reading 0xff000000)
[    0.747572] pcieport 0001:00:00.0: saving config space at offset 0xc (reading 0x10010)
[    0.747589] pcieport 0001:00:00.0: saving config space at offset 0x10 (reading 0x0)
[    0.747608] pcieport 0001:00:00.0: saving config space at offset 0x14 (reading 0x0)
[    0.747625] pcieport 0001:00:00.0: saving config space at offset 0x18 (reading 0xff0100)
[    0.747643] pcieport 0001:00:00.0: saving config space at offset 0x1c (reading 0xf0)
[    0.747660] pcieport 0001:00:00.0: saving config space at offset 0x20 (reading 0x2e102e00)
[    0.747677] pcieport 0001:00:00.0: saving config space at offset 0x24 (reading 0x1fff1)
[    0.747694] pcieport 0001:00:00.0: saving config space at offset 0x28 (reading 0x0)
[    0.747710] pcieport 0001:00:00.0: saving config space at offset 0x2c (reading 0x0)
[    0.747727] pcieport 0001:00:00.0: saving config space at offset 0x30 (reading 0x0)
[    0.747745] pcieport 0001:00:00.0: saving config space at offset 0x34 (reading 0x40)
[    0.747761] pcieport 0001:00:00.0: saving config space at offset 0x38 (reading 0x0)
[    0.747778] pcieport 0001:00:00.0: saving config space at offset 0x3c (reading 0x3011e)
[    0.954860] krait-cc soc:clock-controller: CPU0 @ 800000 KHz
[    0.954886] krait-cc soc:clock-controller: CPU1 @ Undefined rate. Forcing new rate.
[    0.955163] krait-cc soc:clock-controller: CPU1 @ 800000 KHz
[    0.955184] krait-cc soc:clock-controller: L2 @ Undefined rate. Forcing new rate.
[    0.955471] krait-cc soc:clock-controller: L2 @ 800000 KHz
[    0.964336] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[    0.967332] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.969328] msm_serial 16340000.serial: msm_serial: detected port #0
[    0.969387] msm_serial 16340000.serial: uartclk = 7372800
[    0.969593] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 35, base_baud = 460800) is a MSM
[    0.969704] msm_serial: console setup on port #0
[    1.912243] printk: console [ttyMSM0] enabled
[    1.917776] msm_serial: driver initialized
[    1.932875] loop: module loaded
[    1.935444] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
[    1.935489] nand: AMD/Spansion S34MS01G2
[    1.941530] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    2.401463] random: crng init done
[    2.453865] found squashfs at 1280000 with len of 21757952 bytes
[    3.132436] found squashfs at 3B80000 with len of 22675456 bytes
[    3.132498] 19 fixed-partitions partitions found on MTD device qcom_nand.0
[    3.137563] Creating 19 MTD partitions on "qcom_nand.0":
[    3.144300] 0x000000000000-0x000000040000 : "SBL1"
[    3.154412] 0x000000040000-0x000000180000 : "MIBIB"
[    3.157758] 0x000000180000-0x0000002c0000 : "SBL2"
[    3.162551] 0x0000002c0000-0x000000540000 : "SBL3"
[    3.169597] 0x000000540000-0x000000660000 : "DDRCONFIG"
[    3.172732] 0x000000660000-0x000000780000 : "SSD"
[    3.176952] 0x000000780000-0x000000a00000 : "TZ"
[    3.184427] 0x000000a00000-0x000000c80000 : "RPM"
[    3.190092] 0x000000c80000-0x000000dc0000 : "art"
[    3.193450] 0x000000dc0000-0x000000ec0000 : "APPSBL"
[    3.196564] 0x000000ec0000-0x000000f00000 : "u_env"
[    3.200157] 0x000000f00000-0x000000f40000 : "s_env"
[    3.204866] 0x000000f40000-0x000000f80000 : "devinfo"
[    3.209671] 0x000000f80000-0x000003780000 : "linux"
[    3.292500] 0x000001280000-0x000002740000 : "rootfs"
[    3.333912] mtd: setting mtd14 (rootfs) as root device
[    3.334043] 0x000003780000-0x000005f40000 : "linux2"
[    3.416277] 0x000003b80000-0x000005120000 : "rootfs2"
[    3.459263] 0x000005f40000-0x000005f80000 : "nvram"
[    3.460608] 0x000005f80000-0x000008000000 : "ddwrt"
[    3.586794] switch0: Atheros AR8337 rev. 2 switch registered on 37000000.mdio-mii
[    4.377944] ar8327: qca,phy-rgmii-en is not specified
[    4.379677] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_wake_irq not found
[    4.382091] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_lpi not found
[    4.389523] ipq806x-gmac-dwmac 37200000.ethernet: PTP uses main clock
[    4.396712] ipq806x-gmac-dwmac 37200000.ethernet: User ID: 0x10, Synopsys ID: 0x37
[    4.402134] ipq806x-gmac-dwmac 37200000.ethernet:    DWMAC1000
[    4.409503] ipq806x-gmac-dwmac 37200000.ethernet: DMA HW capability register supported
[    4.415395] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported
[    4.423107] ipq806x-gmac-dwmac 37200000.ethernet: COE Type 2
[    4.430940] ipq806x-gmac-dwmac 37200000.ethernet: TX Checksum insertion supported
[    4.436820] ipq806x-gmac-dwmac 37200000.ethernet: Wake-Up On Lan supported
[    4.444208] ipq806x-gmac-dwmac 37200000.ethernet: Enhanced/Alternate descriptors
[    4.450908] ipq806x-gmac-dwmac 37200000.ethernet: Enabled extended descriptors
[    4.458535] ipq806x-gmac-dwmac 37200000.ethernet: Ring mode enabled
[    4.465561] ipq806x-gmac-dwmac 37200000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    4.471726] ipq806x-gmac-dwmac 37200000.ethernet: device MAC address 3a:a3:ea:2d:36:b1
[    4.483845] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_wake_irq not found
[    4.488069] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_lpi not found
[    4.495676] ipq806x-gmac-dwmac 37400000.ethernet: PTP uses main clock
[    4.502554] ipq806x-gmac-dwmac 37400000.ethernet: User ID: 0x10, Synopsys ID: 0x37
[    4.508212] ipq806x-gmac-dwmac 37400000.ethernet:    DWMAC1000
[    4.515752] ipq806x-gmac-dwmac 37400000.ethernet: DMA HW capability register supported
[    4.521592] ipq806x-gmac-dwmac 37400000.ethernet: RX Checksum Offload Engine supported
[    4.529207] ipq806x-gmac-dwmac 37400000.ethernet: COE Type 2
[    4.537163] ipq806x-gmac-dwmac 37400000.ethernet: TX Checksum insertion supported
[    4.543006] ipq806x-gmac-dwmac 37400000.ethernet: Wake-Up On Lan supported
[    4.550301] ipq806x-gmac-dwmac 37400000.ethernet: Enhanced/Alternate descriptors
[    4.557159] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors
[    4.564698] ipq806x-gmac-dwmac 37400000.ethernet: Ring mode enabled
[    4.571716] ipq806x-gmac-dwmac 37400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    4.577831] ipq806x-gmac-dwmac 37400000.ethernet: device MAC address 1e:a3:b3:4b:84:0d
[    4.589581] PPP generic driver version 2.4.2
[    4.594634] PPP BSD Compression module registered
[    4.598655] PPP Deflate Compression module registered
[    4.603780] PPP MPPE Compression module registered
[    4.608289] NET: Registered PF_PPPOX protocol family
[    4.613445] i2c_dev: i2c /dev entries driver
[    4.626437] GACT probability NOT on
[    4.626501] Mirror/redirect action on
[    4.628838] Simple TC action Loaded
[    4.633801] netem: version 1.3
[    4.635929] u32 classifier
[    4.638979]     Performance counters on
[    4.641757]     input device check on
[    4.645404]     Actions configured
[    4.650731] nf_conntrack_rtsp v0.7 loading
[    4.653935] xt_time: kernel timezone is -0000
[    4.657040] gre: GRE over IPv4 demultiplexor driver
[    4.662341] NET: Registered PF_INET6 protocol family
[    4.668571] Segment Routing with IPv6
[    4.670964] In-situ OAM (IOAM) with IPv6
[    4.674789] NET: Registered PF_PACKET protocol family
[    4.678802] Bridge firewalling registered
[    4.683525] 8021q: 802.1Q VLAN Support v1.8
[    4.687647] Registering SWP/SWPB emulation handler
[    4.695752] registered taskstats version 1
[    4.764150] Failed to get APPS FABRIC clock
[    4.767734] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
[    4.794503] s1a: Bringing 0uV into 1050000-1050000uV
[    4.795347] s1b: Bringing 0uV into 1050000-1050000uV
[    4.799221] s2a: Bringing 0uV into 800000-800000uV
[    4.804247] s2b: Bringing 0uV into 800000-800000uV
[    4.811211] thermal thermal_zone0: failed to read out thermal zone (-110)
[    4.837096] searching for nvram
[    4.837152] nvram size = 262144
[    4.899738] found nvram at 20000
[    4.932148] UBI error: unable to read from mtd13
[    4.944638] VFS: Mounted root (squashfs filesystem) readonly on device 31:16.
[    4.945368] Freeing unused kernel image (initmem) memory: 1024K
[    4.951061] Run /sbin/init as init process
[    4.956577]   with arguments:
[    4.956583]     /sbin/init
[    4.956589]   with environment:
[    4.956595]     HOME=/
[    4.956600]     TERM=linux
[    8.818423] I/O error, dev mtdblock12, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 2
[    8.826101] I/O error, dev mtdblock12, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[    8.826330] Buffer I/O error on dev mtdblock12, logical block 0, async page read
[    8.836876] I/O error, dev mtdblock8, sector 8 op 0x0:(READ) flags 0x80700 phys_seg 13 prio class 2
[    8.843801] I/O error, dev mtdblock8, sector 16 op 0x0:(READ) flags 0x80700 phys_seg 12 prio class 2
[    8.852752] I/O error, dev mtdblock8, sector 24 op 0x0:(READ) flags 0x80700 phys_seg 11 prio class 2
[    8.862108] I/O error, dev mtdblock8, sector 32 op 0x0:(READ) flags 0x80700 phys_seg 10 prio class 2
[    8.870991] I/O error, dev mtdblock8, sector 40 op 0x0:(READ) flags 0x80700 phys_seg 9 prio class 2
[    8.880396] I/O error, dev mtdblock8, sector 48 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 2
[    8.889184] I/O error, dev mtdblock8, sector 56 op 0x0:(READ) flags 0x80700 phys_seg 7 prio class 2
[    8.898160] I/O error, dev mtdblock8, sector 64 op 0x0:(READ) flags 0x80700 phys_seg 6 prio class 2
[    8.913964] Buffer I/O error on dev mtdblock8, logical block 1, async page read
[   10.158907] ath9k: ath9k: Driver unloaded
[   10.574184] ath10k_pci 0000:01:00.0: assign IRQ: got 27
[   10.575025] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[   10.575130] ath10k_pci 0000:01:00.0: enabling bus mastering
[   10.575967] qcom-pcie 1b500000.pci: msi#1 address_hi 0x0 address_lo 0x437f9000
[   10.576151] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[   10.905678] ath10k_pci 0000:01:00.0: found firmware features ie (8 B)
[   10.905727] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
[   10.911112] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[   10.922424] ath10k_pci 0000:01:00.0: firmware ver 10.4-ddwrt-9980-tW-13-7736M api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate,superchannel crc32 0c4006b8
[   10.986616] ath10k_pci 0000:01:00.0: boot get otp board id result 0x00008000 board_id 0 chip_id 1 ext_bid_support 0
[   10.986652] ath10k_pci 0000:01:00.0: board id does not exist in otp, ignore it (0)
[   10.995948] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002'
[   11.003567] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002'
[   11.029481] ath10k_pci 0000:01:00.0: use fallback board name
[   11.029790] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 d86376a7
[   11.093157] ath10k_pci 0000:01:00.0: boot get otp board id result 0x00008000 board_id 0 chip_id 1 ext_bid_support 0
[   11.093195] ath10k_pci 0000:01:00.0: board id does not exist in otp, ignore it (0)
[   11.123011] ath10k_pci 0000:01:00.0: boot upload otp to 0x1234 len 11240
[   14.256633] ath10k_pci 0001:01:00.0: assign IRQ: got 30
[   14.257731] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[   14.257833] ath10k_pci 0001:01:00.0: enabling bus mastering
[   14.258602] qcom-pcie 1b700000.pci: msi#1 address_hi 0x0 address_lo 0x43c01000
[   14.258776] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[   14.423180] ath10k_pci 0001:01:00.0: found firmware features ie (8 B)
[   14.423229] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
[   14.428613] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[   14.439863] ath10k_pci 0001:01:00.0: firmware ver 10.4-ddwrt-9980-tW-13-7736M api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate,superchannel crc32 0c4006b8
[   14.503904] ath10k_pci 0001:01:00.0: boot get otp board id result 0x00008000 board_id 0 chip_id 1 ext_bid_support 0
[   14.503941] ath10k_pci 0001:01:00.0: board id does not exist in otp, ignore it (0)
[   14.513230] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002'
[   14.520793] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002'
[   14.533553] ath10k_pci 0001:01:00.0: use fallback board name
[   14.545755] ath10k_pci 0001:01:00.0: board_file api 1 bmi_id N/A crc32 d86376a7
[   14.609511] ath10k_pci 0001:01:00.0: boot get otp board id result 0x00008000 board_id 0 chip_id 1 ext_bid_support 0
[   14.609552] ath10k_pci 0001:01:00.0: board id does not exist in otp, ignore it (0)
[   14.639234] ath10k_pci 0001:01:00.0: boot upload otp to 0x1234 len 11240
[   17.741514] ath10k_pci 0001:01:00.0: disabling bus mastering
[   17.781650] ath10k_pci 0000:01:00.0: disabling bus mastering
[   19.125356] ipq806x-gmac-dwmac 37200000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[   19.136127] dwmac1000: Master AXI performs any burst length
[   19.136158] ipq806x-gmac-dwmac 37200000.ethernet eth0: No Safety Features support found
[   19.150515] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[   19.150814] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[   19.159340] ipq806x-gmac-dwmac 37200000.ethernet eth0: configuring for fixed/rgmii link mode
[   19.166186] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[   19.174119] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   19.186215] ipq806x-gmac-dwmac 37400000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0
[   19.199473] dwmac1000: Master AXI performs any burst length
[   19.199503] ipq806x-gmac-dwmac 37400000.ethernet eth1: No Safety Features support found
[   19.213942] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[   19.214164] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[   19.222693] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for fixed/sgmii link mode
[   19.229017] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[   19.239423] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   21.413818] device br0 entered promiscuous mode
[   21.534121] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Down
[   21.552045] ipq806x-gmac-dwmac 37400000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0
[   21.562819] dwmac1000: Master AXI performs any burst length
[   21.562852] ipq806x-gmac-dwmac 37400000.ethernet eth1: No Safety Features support found
[   21.577263] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[   21.577467] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[   21.585177] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for fixed/sgmii link mode
[   21.592492] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[   21.600667] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   21.617805] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Down
[   21.629874] ipq806x-gmac-dwmac 37400000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0
[   21.640640] dwmac1000: Master AXI performs any burst length
[   21.640672] ipq806x-gmac-dwmac 37400000.ethernet eth1: No Safety Features support found
[   21.655152] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[   21.655362] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[   21.663090] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for fixed/sgmii link mode
[   21.670170] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[   21.678630] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   21.689913] br0: port 1(eth1) entered blocking state
[   21.698686] br0: port 1(eth1) entered disabled state
[   21.704229] device eth1 entered promiscuous mode
[   21.718887] br0: port 1(eth1) entered blocking state
[   21.718926] br0: port 1(eth1) entered forwarding state
[   21.723453] device br0 left promiscuous mode
[   21.732951] device br0 entered promiscuous mode
[   21.743316] device br0 left promiscuous mode
[   21.831032] export_store: invalid GPIO 390
[   21.831504] export_store: invalid GPIO 390
[   21.834129] export_store: invalid GPIO 390
[   21.838200] export_store: invalid GPIO 390
[   21.842421] export_store: invalid GPIO 390
[   21.846360] export_store: invalid GPIO 390
[   21.850439] export_store: invalid GPIO 390
[   21.854587] export_store: invalid GPIO 390
[   21.858600] export_store: invalid GPIO 390
[   21.862738] export_store: invalid GPIO 390
[   21.866759] export_store: invalid GPIO 390
[   21.870918] export_store: invalid GPIO 425
[   21.874986] export_store: invalid GPIO 425
[   21.878998] export_store: invalid GPIO 425
[   21.883143] export_store: invalid GPIO 425
[   21.887155] export_store: invalid GPIO 425
[   21.891289] export_store: invalid GPIO 425
[   21.895314] export_store: invalid GPIO 425
[   21.899398] export_store: invalid GPIO 425
[   21.903551] export_store: invalid GPIO 425
[   21.907555] export_store: invalid GPIO 425
[   21.911690] export_store: invalid GPIO 425
[   21.915770] export_store: invalid GPIO 390
[   21.919795] export_store: invalid GPIO 390
[   21.924088] export_store: invalid GPIO 390
[   21.927956] export_store: invalid GPIO 390
[   21.932111] export_store: invalid GPIO 390
[   21.936113] export_store: invalid GPIO 390
[   21.940195] export_store: invalid GPIO 390
[   21.944344] export_store: invalid GPIO 390
[   21.948355] export_store: invalid GPIO 390
[   21.952495] export_store: invalid GPIO 390
[   21.956514] export_store: invalid GPIO 390
[   21.960634] export_store: invalid GPIO 425
[   21.964742] export_store: invalid GPIO 425
[   21.968753] export_store: invalid GPIO 425
[   21.972890] export_store: invalid GPIO 425
[   21.976917] export_store: invalid GPIO 425
[   21.980992] export_store: invalid GPIO 425
[   21.985134] export_store: invalid GPIO 425
[   21.989155] export_store: invalid GPIO 425
[   21.993294] export_store: invalid GPIO 425
[   21.997312] export_store: invalid GPIO 425
[   22.001483] export_store: invalid GPIO 425
[   22.291318] device eth0 entered promiscuous mode
[   22.481678] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[   24.490019] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Down
[   24.499184] ipq806x-gmac-dwmac 37200000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[   24.509956] dwmac1000: Master AXI performs any burst length
[   24.509989] ipq806x-gmac-dwmac 37200000.ethernet eth0: No Safety Features support found
[   24.524401] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[   24.524610] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[   24.532332] ipq806x-gmac-dwmac 37200000.ethernet eth0: configuring for fixed/rgmii link mode
[   24.539174] device eth0 left promiscuous mode
[   24.548618] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[   24.552604] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
root@DD-WRT:~# ifconfig
br0       Link encap:Ethernet  HWaddr C0:56:27:08:B2:92  
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::c256:27ff:fe08:b292/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:576 errors:0 dropped:0 overruns:0 frame:0
          TX packets:462 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:61747 (60.2 KiB)  TX bytes:226378 (221.0 KiB)

eth0      Link encap:Ethernet  HWaddr 1E:A3:B3:4B:84:0E  
          inet addr:10.72.28.111  Bcast:10.72.28.255  Mask:255.255.255.0
          inet6 addr: fe80::1ca3:b3ff:fe4b:840e/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:262 errors:0 dropped:0 overruns:0 frame:0
          TX packets:249 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:100202 (97.8 KiB)  TX bytes:43182 (42.1 KiB)
          Interrupt:36 

eth1      Link encap:Ethernet  HWaddr C0:56:27:08:B2:92  
          inet6 addr: fe80::c256:27ff:fe08:b292/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:576 errors:0 dropped:0 overruns:0 frame:0
          TX packets:493 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:69811 (68.1 KiB)  TX bytes:228762 (223.4 KiB)
          Interrupt:37 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING MULTICAST  MTU:65536  Metric:1
          RX packets:8 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:832 (832.0 B)  TX bytes:832 (832.0 B)

root@DD-WRT:~# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00040000 00020000 "SBL1"
mtd1: 00140000 00020000 "MIBIB"
mtd2: 00140000 00020000 "SBL2"
mtd3: 00280000 00020000 "SBL3"
mtd4: 00120000 00020000 "DDRCONFIG"
mtd5: 00120000 00020000 "SSD"
mtd6: 00280000 00020000 "TZ"
mtd7: 00280000 00020000 "RPM"
mtd8: 00140000 00020000 "art"
mtd9: 00100000 00020000 "APPSBL"
mtd10: 00040000 00020000 "u_env"
mtd11: 00040000 00020000 "s_env"
mtd12: 00040000 00020000 "devinfo"
mtd13: 02800000 00020000 "linux"
mtd14: 014c0000 00020000 "rootfs"
mtd15: 027c0000 00020000 "linux2"
mtd16: 015a0000 00020000 "rootfs2"
mtd17: 00040000 00020000 "nvram"
mtd18: 02080000 00020000 "ddwrt"
root@DD-WRT:~# cat /tmp/var/log/message
cat: can't open '/tmp/var/log/message': No such file or directory
root@DD-WRT:~# cat /tmp/var/log/messages
Dec 31 18:00:20 DD-WRT syslog.info syslogd started: BusyBox v1.36.1
Dec 31 18:00:20 DD-WRT user.info : [klogd] : successfully started
Dec 31 18:00:20 DD-WRT kern.notice kernel: klogd started: BusyBox v1.36.1 (2024-04-09 06:14:27 +07)
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.000000] Booting Linux on physical CPU 0x0
Dec 31 18:00:20 DD-WRT kern.notice kernel: [    0.000000] Linux version 6.1.84 (root@server2) (arm-openwrt-linux-gcc (OpenWrt GCC 13.2.0 r24111-66f6c20e45) 13.2.0, GNU ld (GNU Binutils) 2.41) #127 SMP Mon Apr  8 13:24:06 +07 2024
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.000000] CPU: div instructions available: patching division code
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.000000] OF: fdt: Machine model: Linksys EA8500 WiFi Router
Dec 31 18:00:20 DD-WRT kern.warn kernel: [    0.000000] OF: fdt: Ignoring memory range 0x41500000 - 0x42000000
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.000000] Memory policy: Data cache writealloc
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.000000] Zone ranges:
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.000000]   Normal   [mem 0x0000000042000000-0x000000005fffffff]
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.000000]   HighMem  empty
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.000000] Movable zone start for each node
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.000000] Early memory node ranges
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.000000]   node   0: [mem 0x0000000042000000-0x000000005fffffff]
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000042000000-0x000000005fffffff]
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.000000] percpu: Embedded 12 pages/cpu s17652 r8192 d23308 u49152
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.000000] pcpu-alloc: s17652 r8192 d23308 u49152 alloc=12*4096
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 121920
Dec 31 18:00:20 DD-WRT kern.notice kernel: [    0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:16
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.000000] Memory: 471616K/491520K available (8180K kernel code, 807K rwdata, 2256K rodata, 1024K init, 2309K bss, 19904K reserved, 0K cma-reserved, 0K highmem)
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.000000] rcu: Hierarchical RCU implementation.
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.000001] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.000024] Switching to timer-based delay loop, resolution 160ns
Dec 31 18:00:20 DD-WRT kern.warn kernel: [    0.000267] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
Dec 31 18:00:20 DD-WRT kern.warn kernel: [    0.000278] ... MAX_LOCKDEP_SUBCLASSES:  8
Dec 31 18:00:20 DD-WRT kern.warn kernel: [    0.000287] ... MAX_LOCK_DEPTH:          48
Dec 31 18:00:20 DD-WRT kern.warn kernel: [    0.000296] ... MAX_LOCKDEP_KEYS:        8192
Dec 31 18:00:20 DD-WRT kern.warn kernel: [    0.000304] ... CLASSHASH_SIZE:          4096
Dec 31 18:00:20 DD-WRT kern.warn kernel: [    0.000314] ... MAX_LOCKDEP_ENTRIES:     32768
Dec 31 18:00:20 DD-WRT kern.warn kernel: [    0.000323] ... MAX_LOCKDEP_CHAINS:      65536
Dec 31 18:00:20 DD-WRT kern.warn kernel: [    0.000331] ... CHAINHASH_SIZE:          32768
Dec 31 18:00:20 DD-WRT kern.warn kernel: [    0.000341]  memory used by lock dependency info: 1861 kB
Dec 31 18:00:20 DD-WRT kern.warn kernel: [    0.000351]  per task-struct memory footprint: 1536 bytes
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.000420] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.000450] CPU: Testing write buffer coherency: ok
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.000535] pid_max: default: 32768 minimum: 301
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.001346] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.001372] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.004085] qcom_scm: convention: smc legacy
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.005868] Setting up static identity map for 0x42300000 - 0x42300060
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.006196] rcu: Hierarchical SRCU implementation.
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.006209] rcu:    Max phase no-delay instances is 1000.
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.007633] smp: Bringing up secondary CPUs ...
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.010975] smp: Brought up 1 node, 2 CPUs
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.010994] SMP: Total of 2 processors activated (25.00 BogoMIPS).
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.011011] CPU: All CPU(s) started in SVC mode.
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.037484] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.037912] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.037950] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.038363] pinctrl core: initialized pinctrl subsystem
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.042457] NET: Registered PF_NETLINK/PF_ROUTE protocol family
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.043167] DMA: preallocated 256 KiB pool for atomic coherent allocations
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.046710] thermal_sys: Registered thermal governor 'step_wise'
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.047027] cpuidle: using governor ladder
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.047171] cpuidle: using governor menu
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.111562] cryptd: max_cpu_qlen set to 1000
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.116258] pps_core: LinuxPPS API ver. 1 registered
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.116275] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.116335] PTP clock support registered
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.119702] mctp: management component transport protocol core
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.119719] NET: Registered PF_MCTP protocol family
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.120918] clocksource: Switched to clocksource dg_timer
Dec 31 18:00:20 DD-WRT kern.notice kernel: [    0.122011] VFS: Disk quotas dquot_6.6.0
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.122183] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.124637] NET: Registered PF_INET protocol family
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.124990] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.127163] tcp_listen_portaddr_hash hash table entries: 256 (order: 1, 10240 bytes, linear)
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.127247] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.127288] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.127412] TCP bind hash table entries: 4096 (order: 6, 327680 bytes, linear)
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.128961] TCP: Hash tables configured (established 4096 bind 4096)
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.129708] MPTCP token hash table entries: 512 (order: 2, 24576 bytes, linear)
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.129956] UDP hash table entries: 256 (order: 2, 24576 bytes, linear)
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.130099] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes, linear)
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.130719] NET: Registered PF_UNIX/PF_LOCAL protocol family
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.130905] PCI: CLS 0 bytes, default 64
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.139635] workingset: timestamp_bits=30 max_order=17 bucket_order=0
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.156561] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Dec 31 18:00:20 DD-WRT kern.warn kernel: [    0.272865] qcom-pcie 1b500000.pci: supply vdda not found, using dummy regulator
Dec 31 18:00:20 DD-WRT kern.warn kernel: [    0.273452] qcom-pcie 1b500000.pci: supply vdda_phy not found, using dummy regulator
Dec 31 18:00:20 DD-WRT kern.warn kernel: [    0.273729] qcom-pcie 1b500000.pci: supply vdda_refclk not found, using dummy regulator
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.274334] qcom-pcie 1b500000.pci: host bridge /soc/pci@1b500000 ranges:
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.274403] qcom-pcie 1b500000.pci: Parsing ranges property...
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.274474] qcom-pcie 1b500000.pci:       IO 0x000fe00000..0x000fe0ffff -> 0x0000000000
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.274600] qcom-pcie 1b500000.pci:      MEM 0x0008000000..0x000fdfffff -> 0x0008000000
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.393927] qcom-pcie 1b500000.pci: Using 32 MSI vectors
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.394326] qcom-pcie 1b500000.pci: iATU unroll: disabled
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.394344] qcom-pcie 1b500000.pci: iATU regions: 8 ob, 8 ib, align 4K, limit 4G
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.497161] qcom-pcie 1b500000.pci: PCIe Gen.1 x1 link up
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.497582] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.497608] pci_bus 0000:00: root bus resource [bus 00-ff]
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.497632] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.497650] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.497670] pci_bus 0000:00: scanning bus
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.497845] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.498102] pci 0000:00:00.0: supports D1
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.498122] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.498195] pci 0000:00:00.0: PME# disabled
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.502166] pci_bus 0000:00: fixups for bus
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.502201] PCI: bus0: Fast back to back transfers disabled
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.502224] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.502477] pci_bus 0000:01: scanning bus
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.502758] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.503061] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.504468] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.504525] pci 0000:01:00.0: PME# disabled
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.504947] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.505995] pci_bus 0000:01: fixups for bus
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.506085] PCI: bus1: Fast back to back transfers disabled
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.506104] pci_bus 0000:01: bus scan returning with max=01
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.506129] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.506156] pci_bus 0000:00: bus scan returning with max=ff
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.506192] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.506226] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.506380] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.506410] pci 0000:00:00.0:   bridge window [mem 0x08000000-0x081fffff]
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.506813] pcieport 0000:00:00.0: assign IRQ: got 27
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.507259] qcom-pcie 1b500000.pci: msi#0 address_hi 0x0 address_lo 0x437f9000
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.508285] pcieport 0000:00:00.0: AER: enabled with IRQ 28
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.508495] pcieport 0000:00:00.0: saving config space at offset 0x0 (reading 0x10117cb)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.508518] pcieport 0000:00:00.0: saving config space at offset 0x4 (reading 0x100547)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.508536] pcieport 0000:00:00.0: saving config space at offset 0x8 (reading 0xff000000)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.508553] pcieport 0000:00:00.0: saving config space at offset 0xc (reading 0x10010)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.508570] pcieport 0000:00:00.0: saving config space at offset 0x10 (reading 0x0)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.508588] pcieport 0000:00:00.0: saving config space at offset 0x14 (reading 0x0)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.508605] pcieport 0000:00:00.0: saving config space at offset 0x18 (reading 0xff0100)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.508623] pcieport 0000:00:00.0: saving config space at offset 0x1c (reading 0xf0)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.508640] pcieport 0000:00:00.0: saving config space at offset 0x20 (reading 0x8100800)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.508656] pcieport 0000:00:00.0: saving config space at offset 0x24 (reading 0x1fff1)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.508676] pcieport 0000:00:00.0: saving config space at offset 0x28 (reading 0x0)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.508693] pcieport 0000:00:00.0: saving config space at offset 0x2c (reading 0x0)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.508711] pcieport 0000:00:00.0: saving config space at offset 0x30 (reading 0x0)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.508731] pcieport 0000:00:00.0: saving config space at offset 0x34 (reading 0x40)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.508748] pcieport 0000:00:00.0: saving config space at offset 0x38 (reading 0x0)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.508766] pcieport 0000:00:00.0: saving config space at offset 0x3c (reading 0x3011b)
Dec 31 18:00:20 DD-WRT kern.warn kernel: [    0.509973] qcom-pcie 1b700000.pci: supply vdda not found, using dummy regulator
Dec 31 18:00:20 DD-WRT kern.warn kernel: [    0.510500] qcom-pcie 1b700000.pci: supply vdda_phy not found, using dummy regulator
Dec 31 18:00:20 DD-WRT kern.warn kernel: [    0.510715] qcom-pcie 1b700000.pci: supply vdda_refclk not found, using dummy regulator
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.511374] qcom-pcie 1b700000.pci: host bridge /soc/pci@1b700000 ranges:
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.511433] qcom-pcie 1b700000.pci: Parsing ranges property...
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.511511] qcom-pcie 1b700000.pci:       IO 0x0031e00000..0x0031e0ffff -> 0x0000000000
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.511569] qcom-pcie 1b700000.pci:      MEM 0x002e000000..0x0031dfffff -> 0x002e000000
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.634044] qcom-pcie 1b700000.pci: Using 32 MSI vectors
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.634371] qcom-pcie 1b700000.pci: iATU unroll: disabled
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.634392] qcom-pcie 1b700000.pci: iATU regions: 8 ob, 8 ib, align 4K, limit 4G
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.737147] qcom-pcie 1b700000.pci: PCIe Gen.2 x1 link up
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.737448] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.737472] pci_bus 0001:00: root bus resource [bus 00-ff]
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.737498] pci_bus 0001:00: root bus resource [io  0x10000-0x1ffff] (bus address [0x0000-0xffff])
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.737516] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.737535] pci_bus 0001:00: scanning bus
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.737605] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.737792] pci 0001:00:00.0: supports D1
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.737808] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.737832] pci 0001:00:00.0: PME# disabled
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.741721] pci_bus 0001:00: fixups for bus
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.741752] PCI: bus0: Fast back to back transfers disabled
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.741772] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.742098] pci_bus 0001:01: scanning bus
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.742363] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.742649] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.743963] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.744017] pci 0001:01:00.0: PME# disabled
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.745428] pci_bus 0001:01: fixups for bus
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.745516] PCI: bus1: Fast back to back transfers disabled
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.745535] pci_bus 0001:01: bus scan returning with max=01
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.745558] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.745585] pci_bus 0001:00: bus scan returning with max=ff
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.745620] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.745650] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.745794] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.745823] pci 0001:00:00.0:   bridge window [mem 0x2e000000-0x2e1fffff]
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.746155] pcieport 0001:00:00.0: assign IRQ: got 30
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.746400] qcom-pcie 1b700000.pci: msi#0 address_hi 0x0 address_lo 0x43c01000
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.747222] pcieport 0001:00:00.0: AER: enabled with IRQ 31
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.747511] pcieport 0001:00:00.0: saving config space at offset 0x0 (reading 0x10117cb)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.747535] pcieport 0001:00:00.0: saving config space at offset 0x4 (reading 0x100547)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.747555] pcieport 0001:00:00.0: saving config space at offset 0x8 (reading 0xff000000)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.747572] pcieport 0001:00:00.0: saving config space at offset 0xc (reading 0x10010)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.747589] pcieport 0001:00:00.0: saving config space at offset 0x10 (reading 0x0)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.747608] pcieport 0001:00:00.0: saving config space at offset 0x14 (reading 0x0)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.747625] pcieport 0001:00:00.0: saving config space at offset 0x18 (reading 0xff0100)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.747643] pcieport 0001:00:00.0: saving config space at offset 0x1c (reading 0xf0)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.747660] pcieport 0001:00:00.0: saving config space at offset 0x20 (reading 0x2e102e00)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.747677] pcieport 0001:00:00.0: saving config space at offset 0x24 (reading 0x1fff1)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.747694] pcieport 0001:00:00.0: saving config space at offset 0x28 (reading 0x0)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.747710] pcieport 0001:00:00.0: saving config space at offset 0x2c (reading 0x0)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.747727] pcieport 0001:00:00.0: saving config space at offset 0x30 (reading 0x0)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.747745] pcieport 0001:00:00.0: saving config space at offset 0x34 (reading 0x40)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.747761] pcieport 0001:00:00.0: saving config space at offset 0x38 (reading 0x0)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    0.747778] pcieport 0001:00:00.0: saving config space at offset 0x3c (reading 0x3011e)
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.954860] krait-cc soc:clock-controller: CPU0 @ 800000 KHz
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.954886] krait-cc soc:clock-controller: CPU1 @ Undefined rate. Forcing new rate.
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.955163] krait-cc soc:clock-controller: CPU1 @ 800000 KHz
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.955184] krait-cc soc:clock-controller: L2 @ Undefined rate. Forcing new rate.
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.955471] krait-cc soc:clock-controller: L2 @ 800000 KHz
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.964336] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.967332] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.969328] msm_serial 16340000.serial: msm_serial: detected port #0
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.969387] msm_serial 16340000.serial: uartclk = 7372800
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.969593] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 35, base_baud = 460800) is a MSM
Dec 31 18:00:20 DD-WRT kern.info kernel: [    0.969704] msm_serial: console setup on port #0
Dec 31 18:00:20 DD-WRT kern.info kernel: [    1.912243] printk: console [ttyMSM0] enabled
Dec 31 18:00:20 DD-WRT kern.info kernel: [    1.917776] msm_serial: driver initialized
Dec 31 18:00:20 DD-WRT kern.info kernel: [    1.932875] loop: module loaded
Dec 31 18:00:20 DD-WRT kern.info kernel: [    1.935444] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
Dec 31 18:00:20 DD-WRT kern.info kernel: [    1.935489] nand: AMD/Spansion S34MS01G2
Dec 31 18:00:20 DD-WRT kern.info kernel: [    1.941530] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Dec 31 18:00:20 DD-WRT kern.notice kernel: [    2.401463] random: crng init done
Dec 31 18:00:20 DD-WRT kern.emerg kernel: [    2.453865] found squashfs at 1280000 with len of 21757952 bytes
Dec 31 18:00:20 DD-WRT kern.emerg kernel: [    3.132436] found squashfs at 3B80000 with len of 22675456 bytes
Dec 31 18:00:20 DD-WRT kern.notice kernel: [    3.132498] 19 fixed-partitions partitions found on MTD device qcom_nand.0
Dec 31 18:00:20 DD-WRT kern.notice kernel: [    3.137563] Creating 19 MTD partitions on "qcom_nand.0":
Dec 31 18:00:20 DD-WRT kern.notice kernel: [    3.144300] 0x000000000000-0x000000040000 : "SBL1"
Dec 31 18:00:20 DD-WRT kern.notice kernel: [    3.154412] 0x000000040000-0x000000180000 : "MIBIB"
Dec 31 18:00:20 DD-WRT kern.notice kernel: [    3.157758] 0x000000180000-0x0000002c0000 : "SBL2"
Dec 31 18:00:20 DD-WRT kern.notice kernel: [    3.162551] 0x0000002c0000-0x000000540000 : "SBL3"
Dec 31 18:00:20 DD-WRT kern.notice kernel: [    3.169597] 0x000000540000-0x000000660000 : "DDRCONFIG"
Dec 31 18:00:20 DD-WRT kern.notice kernel: [    3.172732] 0x000000660000-0x000000780000 : "SSD"
Dec 31 18:00:20 DD-WRT kern.notice kernel: [    3.176952] 0x000000780000-0x000000a00000 : "TZ"
Dec 31 18:00:20 DD-WRT kern.notice kernel: [    3.184427] 0x000000a00000-0x000000c80000 : "RPM"
Dec 31 18:00:20 DD-WRT kern.notice kernel: [    3.190092] 0x000000c80000-0x000000dc0000 : "art"
Dec 31 18:00:20 DD-WRT kern.notice kernel: [    3.193450] 0x000000dc0000-0x000000ec0000 : "APPSBL"
Dec 31 18:00:20 DD-WRT kern.notice kernel: [    3.196564] 0x000000ec0000-0x000000f00000 : "u_env"
Dec 31 18:00:20 DD-WRT kern.notice kernel: [    3.200157] 0x000000f00000-0x000000f40000 : "s_env"
Dec 31 18:00:20 DD-WRT kern.notice kernel: [    3.204866] 0x000000f40000-0x000000f80000 : "devinfo"
Dec 31 18:00:20 DD-WRT kern.notice kernel: [    3.209671] 0x000000f80000-0x000003780000 : "linux"
Dec 31 18:00:20 DD-WRT kern.notice kernel: [    3.292500] 0x000001280000-0x000002740000 : "rootfs"
Dec 31 18:00:20 DD-WRT kern.info kernel: [    3.333912] mtd: setting mtd14 (rootfs) as root device
Dec 31 18:00:20 DD-WRT kern.notice kernel: [    3.334043] 0x000003780000-0x000005f40000 : "linux2"
Dec 31 18:00:20 DD-WRT kern.notice kernel: [    3.416277] 0x000003b80000-0x000005120000 : "rootfs2"
Dec 31 18:00:20 DD-WRT kern.notice kernel: [    3.459263] 0x000005f40000-0x000005f80000 : "nvram"
Dec 31 18:00:20 DD-WRT kern.notice kernel: [    3.460608] 0x000005f80000-0x000008000000 : "ddwrt"
Dec 31 18:00:20 DD-WRT kern.info kernel: [    3.586794] switch0: Atheros AR8337 rev. 2 switch registered on 37000000.mdio-mii
Dec 31 18:00:20 DD-WRT kern.err kernel: [    4.377944] ar8327: qca,phy-rgmii-en is not specified
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.379677] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_wake_irq not found
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.382091] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_lpi not found
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.389523] ipq806x-gmac-dwmac 37200000.ethernet: PTP uses main clock
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.396712] ipq806x-gmac-dwmac 37200000.ethernet: User ID: 0x10, Synopsys ID: 0x37
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.402134] ipq806x-gmac-dwmac 37200000.ethernet:   DWMAC1000
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.409503] ipq806x-gmac-dwmac 37200000.ethernet: DMA HW capability register supported
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.415395] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.423107] ipq806x-gmac-dwmac 37200000.ethernet: COE Type 2
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.430940] ipq806x-gmac-dwmac 37200000.ethernet: TX Checksum insertion supported
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.436820] ipq806x-gmac-dwmac 37200000.ethernet: Wake-Up On Lan supported
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.444208] ipq806x-gmac-dwmac 37200000.ethernet: Enhanced/Alternate descriptors
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.450908] ipq806x-gmac-dwmac 37200000.ethernet: Enabled extended descriptors
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.458535] ipq806x-gmac-dwmac 37200000.ethernet: Ring mode enabled
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.465561] ipq806x-gmac-dwmac 37200000.ethernet: Enable RX Mitigation via HW Watchdog Timer
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.471726] ipq806x-gmac-dwmac 37200000.ethernet: device MAC address 3a:a3:ea:2d:36:b1
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.483845] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_wake_irq not found
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.488069] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_lpi not found
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.495676] ipq806x-gmac-dwmac 37400000.ethernet: PTP uses main clock
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.502554] ipq806x-gmac-dwmac 37400000.ethernet: User ID: 0x10, Synopsys ID: 0x37
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.508212] ipq806x-gmac-dwmac 37400000.ethernet:   DWMAC1000
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.515752] ipq806x-gmac-dwmac 37400000.ethernet: DMA HW capability register supported
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.521592] ipq806x-gmac-dwmac 37400000.ethernet: RX Checksum Offload Engine supported
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.529207] ipq806x-gmac-dwmac 37400000.ethernet: COE Type 2
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.537163] ipq806x-gmac-dwmac 37400000.ethernet: TX Checksum insertion supported
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.543006] ipq806x-gmac-dwmac 37400000.ethernet: Wake-Up On Lan supported
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.550301] ipq806x-gmac-dwmac 37400000.ethernet: Enhanced/Alternate descriptors
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.557159] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.564698] ipq806x-gmac-dwmac 37400000.ethernet: Ring mode enabled
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.571716] ipq806x-gmac-dwmac 37400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.577831] ipq806x-gmac-dwmac 37400000.ethernet: device MAC address 1e:a3:b3:4b:84:0d
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.589581] PPP generic driver version 2.4.2
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.594634] PPP BSD Compression module registered
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.598655] PPP Deflate Compression module registered
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.603780] PPP MPPE Compression module registered
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.608289] NET: Registered PF_PPPOX protocol family
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.613445] i2c_dev: i2c /dev entries driver
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.626437] GACT probability NOT on
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.626501] Mirror/redirect action on
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.628838] Simple TC action Loaded
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.633801] netem: version 1.3
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.635929] u32 classifier
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.638979]     Performance counters on
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.641757]     input device check on
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.645404]     Actions configured
Dec 31 18:00:20 DD-WRT kern.warn kernel: [    4.650731] nf_conntrack_rtsp v0.7 loading
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.653935] xt_time: kernel timezone is -0000
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.657040] gre: GRE over IPv4 demultiplexor driver
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.662341] NET: Registered PF_INET6 protocol family
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.668571] Segment Routing with IPv6
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.670964] In-situ OAM (IOAM) with IPv6
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.674789] NET: Registered PF_PACKET protocol family
Dec 31 18:00:20 DD-WRT kern.notice kernel: [    4.678802] Bridge firewalling registered
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.683525] 8021q: 802.1Q VLAN Support v1.8
Dec 31 18:00:20 DD-WRT kern.notice kernel: [    4.687647] Registering SWP/SWPB emulation handler
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.695752] registered taskstats version 1
Dec 31 18:00:20 DD-WRT kern.err kernel: [    4.764150] Failed to get APPS FABRIC clock
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.767734] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.794503] s1a: Bringing 0uV into 1050000-1050000uV
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.795347] s1b: Bringing 0uV into 1050000-1050000uV
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.799221] s2a: Bringing 0uV into 800000-800000uV
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.804247] s2b: Bringing 0uV into 800000-800000uV
Dec 31 18:00:20 DD-WRT kern.warn kernel: [    4.811211] thermal thermal_zone0: failed to read out thermal zone (-110)
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.837096] searching for nvram
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.837152] nvram size = 262144
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.899738] found nvram at 20000
Dec 31 18:00:20 DD-WRT kern.err kernel: [    4.932148] UBI error: unable to read from mtd13
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.944638] VFS: Mounted root (squashfs filesystem) readonly on device 31:16.
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.945368] Freeing unused kernel image (initmem) memory: 1024K
Dec 31 18:00:20 DD-WRT kern.info kernel: [    4.951061] Run /sbin/init as init process
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    4.956577]   with arguments:
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    4.956583]     /sbin/init
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    4.956589]   with environment:
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    4.956595]     HOME=/
Dec 31 18:00:20 DD-WRT kern.debug kernel: [    4.956600]     TERM=linux
Dec 31 18:00:20 DD-WRT kern.err kernel: [    8.818423] I/O error, dev mtdblock12, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 2
Dec 31 18:00:20 DD-WRT kern.err kernel: [    8.826101] I/O error, dev mtdblock12, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
Dec 31 18:00:20 DD-WRT kern.err kernel: [    8.826330] Buffer I/O error on dev mtdblock12, logical block 0, async page read
Dec 31 18:00:20 DD-WRT kern.err kernel: [    8.836876] I/O error, dev mtdblock8, sector 8 op 0x0:(READ) flags 0x80700 phys_seg 13 prio class 2
Dec 31 18:00:20 DD-WRT kern.err kernel: [    8.843801] I/O error, dev mtdblock8, sector 16 op 0x0:(READ) flags 0x80700 phys_seg 12 prio class 2
Dec 31 18:00:20 DD-WRT kern.err kernel: [    8.852752] I/O error, dev mtdblock8, sector 24 op 0x0:(READ) flags 0x80700 phys_seg 11 prio class 2
Dec 31 18:00:20 DD-WRT kern.err kernel: [    8.862108] I/O error, dev mtdblock8, sector 32 op 0x0:(READ) flags 0x80700 phys_seg 10 prio class 2
Dec 31 18:00:20 DD-WRT kern.err kernel: [    8.870991] I/O error, dev mtdblock8, sector 40 op 0x0:(READ) flags 0x80700 phys_seg 9 prio class 2
Dec 31 18:00:20 DD-WRT kern.err kernel: [    8.880396] I/O error, dev mtdblock8, sector 48 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 2
Dec 31 18:00:20 DD-WRT kern.err kernel: [    8.889184] I/O error, dev mtdblock8, sector 56 op 0x0:(READ) flags 0x80700 phys_seg 7 prio class 2
Dec 31 18:00:20 DD-WRT kern.err kernel: [    8.898160] I/O error, dev mtdblock8, sector 64 op 0x0:(READ) flags 0x80700 phys_seg 6 prio class 2
Dec 31 18:00:20 DD-WRT kern.err kernel: [    8.913964] Buffer I/O error on dev mtdblock8, logical block 1, async page read
Dec 31 18:00:20 DD-WRT kern.info kernel: [   10.158907] ath9k: ath9k: Driver unloaded
Dec 31 18:00:20 DD-WRT kern.debug kernel: [   10.574184] ath10k_pci 0000:01:00.0: assign IRQ: got 27
Dec 31 18:00:20 DD-WRT kern.info kernel: [   10.575025] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [   10.575130] ath10k_pci 0000:01:00.0: enabling bus mastering
Dec 31 18:00:20 DD-WRT kern.debug kernel: [   10.575967] qcom-pcie 1b500000.pci: msi#1 address_hi 0x0 address_lo 0x437f9000
Dec 31 18:00:20 DD-WRT kern.info kernel: [   10.576151] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Dec 31 18:00:20 DD-WRT kern.info kernel: [   10.905678] ath10k_pci 0000:01:00.0: found firmware features ie (8 B)
Dec 31 18:00:20 DD-WRT kern.info kernel: [   10.905727] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
Dec 31 18:00:20 DD-WRT kern.info kernel: [   10.911112] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
Dec 31 18:00:20 DD-WRT kern.info kernel: [   10.922424] ath10k_pci 0000:01:00.0: firmware ver 10.4-ddwrt-9980-tW-13-7736M api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate,superchannel crc32 0c4006b8
Dec 31 18:00:20 DD-WRT kern.info kernel: [   10.986616] ath10k_pci 0000:01:00.0: boot get otp board id result 0x00008000 board_id 0 chip_id 1 ext_bid_support 0
Dec 31 18:00:20 DD-WRT kern.info kernel: [   10.986652] ath10k_pci 0000:01:00.0: board id does not exist in otp, ignore it (0)
Dec 31 18:00:20 DD-WRT kern.info kernel: [   10.995948] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002'
Dec 31 18:00:20 DD-WRT kern.info kernel: [   11.003567] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002'
Dec 31 18:00:20 DD-WRT kern.info kernel: [   11.029481] ath10k_pci 0000:01:00.0: use fallback board name
Dec 31 18:00:20 DD-WRT kern.info kernel: [   11.029790] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 d86376a7
Dec 31 18:00:20 DD-WRT kern.info kernel: [   11.093157] ath10k_pci 0000:01:00.0: boot get otp board id result 0x00008000 board_id 0 chip_id 1 ext_bid_support 0
Dec 31 18:00:20 DD-WRT kern.info kernel: [   11.093195] ath10k_pci 0000:01:00.0: board id does not exist in otp, ignore it (0)
Dec 31 18:00:20 DD-WRT kern.info kernel: [   11.123011] ath10k_pci 0000:01:00.0: boot upload otp to 0x1234 len 11240
Dec 31 18:00:20 DD-WRT kern.debug kernel: [   14.256633] ath10k_pci 0001:01:00.0: assign IRQ: got 30
Dec 31 18:00:20 DD-WRT kern.info kernel: [   14.257731] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
Dec 31 18:00:20 DD-WRT kern.debug kernel: [   14.257833] ath10k_pci 0001:01:00.0: enabling bus mastering
Dec 31 18:00:20 DD-WRT kern.debug kernel: [   14.258602] qcom-pcie 1b700000.pci: msi#1 address_hi 0x0 address_lo 0x43c01000
Dec 31 18:00:20 DD-WRT kern.info kernel: [   14.258776] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Dec 31 18:00:20 DD-WRT kern.info kernel: [   14.423180] ath10k_pci 0001:01:00.0: found firmware features ie (8 B)
Dec 31 18:00:20 DD-WRT kern.info kernel: [   14.423229] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
Dec 31 18:00:20 DD-WRT kern.info kernel: [   14.428613] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
Dec 31 18:00:20 DD-WRT kern.info kernel: [   14.439863] ath10k_pci 0001:01:00.0: firmware ver 10.4-ddwrt-9980-tW-13-7736M api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate,superchannel crc32 0c4006b8
Dec 31 18:00:20 DD-WRT kern.info kernel: [   14.503904] ath10k_pci 0001:01:00.0: boot get otp board id result 0x00008000 board_id 0 chip_id 1 ext_bid_support 0
Dec 31 18:00:20 DD-WRT kern.info kernel: [   14.503941] ath10k_pci 0001:01:00.0: board id does not exist in otp, ignore it (0)
Dec 31 18:00:20 DD-WRT kern.info kernel: [   14.513230] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002'
Dec 31 18:00:20 DD-WRT kern.info kernel: [   14.520793] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002'
Dec 31 18:00:20 DD-WRT kern.info kernel: [   14.533553] ath10k_pci 0001:01:00.0: use fallback board name
Dec 31 18:00:20 DD-WRT kern.info kernel: [   14.545755] ath10k_pci 0001:01:00.0: board_file api 1 bmi_id N/A crc32 d86376a7
Dec 31 18:00:20 DD-WRT kern.info kernel: [   14.609511] ath10k_pci 0001:01:00.0: boot get otp board id result 0x00008000 board_id 0 chip_id 1 ext_bid_support 0
Dec 31 18:00:20 DD-WRT kern.info kernel: [   14.609552] ath10k_pci 0001:01:00.0: board id does not exist in otp, ignore it (0)
Dec 31 18:00:20 DD-WRT kern.info kernel: [   14.639234] ath10k_pci 0001:01:00.0: boot upload otp to 0x1234 len 11240
Dec 31 18:00:20 DD-WRT kern.debug kernel: [   17.741514] ath10k_pci 0001:01:00.0: disabling bus mastering
Dec 31 18:00:20 DD-WRT kern.debug kernel: [   17.781650] ath10k_pci 0000:01:00.0: disabling bus mastering
Dec 31 18:00:20 DD-WRT kern.info kernel: [   19.125356] ipq806x-gmac-dwmac 37200000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
Dec 31 18:00:20 DD-WRT kern.info kernel: [   19.136127] dwmac1000: Master AXI performs any burst length
Dec 31 18:00:20 DD-WRT kern.info kernel: [   19.136158] ipq806x-gmac-dwmac 37200000.ethernet eth0: No Safety Features support found
Dec 31 18:00:20 DD-WRT kern.info kernel: [   19.150515] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
Dec 31 18:00:20 DD-WRT kern.info kernel: [   19.150814] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
Dec 31 18:00:20 DD-WRT kern.info kernel: [   19.159340] ipq806x-gmac-dwmac 37200000.ethernet eth0: configuring for fixed/rgmii link mode
Dec 31 18:00:20 DD-WRT kern.info kernel: [   19.166186] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
Dec 31 18:00:20 DD-WRT kern.info kernel: [   19.174119] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Dec 31 18:00:20 DD-WRT kern.info kernel: [   19.186215] ipq806x-gmac-dwmac 37400000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0
Dec 31 18:00:20 DD-WRT kern.info kernel: [   19.199473] dwmac1000: Master AXI performs any burst length
Dec 31 18:00:20 DD-WRT kern.info kernel: [   19.199503] ipq806x-gmac-dwmac 37400000.ethernet eth1: No Safety Features support found
Dec 31 18:00:20 DD-WRT kern.info kernel: [   19.213942] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
Dec 31 18:00:20 DD-WRT kern.info kernel: [   19.214164] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
Dec 31 18:00:20 DD-WRT kern.info kernel: [   19.222693] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for fixed/sgmii link mode
Dec 31 18:00:20 DD-WRT kern.info kernel: [   19.229017] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
Dec 31 18:00:20 DD-WRT kern.info kernel: [   19.239423] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Dec 31 18:00:21 DD-WRT daemon.info smartd[1389]: smartd pre-7.4 2019-12-30 r5022 [armv7l-linux-6.1.84] (local build)
Dec 31 18:00:21 DD-WRT daemon.info smartd[1389]: Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
Dec 31 18:00:21 DD-WRT daemon.info smartd[1389]: Opened configuration file /usr/etc/smartd.conf
Dec 31 18:00:21 DD-WRT daemon.info smartd[1389]: Drive: DEVICESCAN, implied '-a' Directive on line 32 of file /usr/etc/smartd.conf
Dec 31 18:00:21 DD-WRT daemon.info smartd[1389]: Configuration file /usr/etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Dec 31 18:00:21 DD-WRT daemon.crit smartd[1389]: In the system's table of devices NO devices found to scan
Dec 31 18:00:21 DD-WRT daemon.info smartd[1389]: Unable to monitor any SMART enabled devices. Try debug (-d) option. Exiting...
Dec 31 18:00:21 DD-WRT user.info : [smartd] : Error on startup, returncode 17
Dec 31 18:00:21 DD-WRT user.info : [resetbutton] : successfully started
Dec 31 18:00:21 DD-WRT user.info : [bridge] : bridge br0 successfully added
Dec 31 18:00:21 DD-WRT kern.info kernel: [   21.413818] device br0 entered promiscuous mode
Dec 31 18:00:21 DD-WRT daemon.info mstpd[1263]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 5
Dec 31 18:00:21 DD-WRT daemon.info mstpd[1263]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 5
Dec 31 18:00:21 DD-WRT kern.info kernel: [   21.534121] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Down
Dec 31 18:00:21 DD-WRT kern.info kernel: [   21.552045] ipq806x-gmac-dwmac 37400000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0
Dec 31 18:00:21 DD-WRT kern.info kernel: [   21.562819] dwmac1000: Master AXI performs any burst length
Dec 31 18:00:21 DD-WRT kern.info kernel: [   21.562852] ipq806x-gmac-dwmac 37400000.ethernet eth1: No Safety Features support found
Dec 31 18:00:21 DD-WRT kern.info kernel: [   21.577263] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
Dec 31 18:00:21 DD-WRT kern.info kernel: [   21.577467] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
Dec 31 18:00:21 DD-WRT kern.info kernel: [   21.585177] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for fixed/sgmii link mode
Dec 31 18:00:21 DD-WRT kern.info kernel: [   21.592492] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
Dec 31 18:00:21 DD-WRT kern.info kernel: [   21.600667] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Dec 31 18:00:21 DD-WRT kern.info kernel: [   21.617805] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Down
Dec 31 18:00:21 DD-WRT kern.info kernel: [   21.629874] ipq806x-gmac-dwmac 37400000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0
Dec 31 18:00:21 DD-WRT kern.info kernel: [   21.640640] dwmac1000: Master AXI performs any burst length
Dec 31 18:00:21 DD-WRT kern.info kernel: [   21.640672] ipq806x-gmac-dwmac 37400000.ethernet eth1: No Safety Features support found
Dec 31 18:00:21 DD-WRT kern.info kernel: [   21.655152] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
Dec 31 18:00:21 DD-WRT kern.info kernel: [   21.655362] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
Dec 31 18:00:21 DD-WRT kern.info kernel: [   21.663090] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for fixed/sgmii link mode
Dec 31 18:00:21 DD-WRT kern.info kernel: [   21.670170] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
Dec 31 18:00:21 DD-WRT kern.info kernel: [   21.678630] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Dec 31 18:00:21 DD-WRT user.info : [bridge] : interface eth1 successfully added to bridge br0
Dec 31 18:00:21 DD-WRT kern.info kernel: [   21.689913] br0: port 1(eth1) entered blocking state
Dec 31 18:00:21 DD-WRT kern.info kernel: [   21.698686] br0: port 1(eth1) entered disabled state
Dec 31 18:00:21 DD-WRT kern.info kernel: [   21.704229] device eth1 entered promiscuous mode
Dec 31 18:00:21 DD-WRT kern.info kernel: [   21.718887] br0: port 1(eth1) entered blocking state
Dec 31 18:00:21 DD-WRT kern.info kernel: [   21.718926] br0: port 1(eth1) entered forwarding state
Dec 31 18:00:21 DD-WRT kern.info kernel: [   21.723453] device br0 left promiscuous mode
Dec 31 18:00:21 DD-WRT kern.info kernel: [   21.732951] device br0 entered promiscuous mode
Dec 31 18:00:21 DD-WRT kern.info kernel: [   21.743316] device br0 left promiscuous mode
Dec 31 18:00:21 DD-WRT user.info : [gratarp] : successfully started
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.831032] export_store: invalid GPIO 390
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.831504] export_store: invalid GPIO 390
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.834129] export_store: invalid GPIO 390
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.838200] export_store: invalid GPIO 390
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.842421] export_store: invalid GPIO 390
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.846360] export_store: invalid GPIO 390
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.850439] export_store: invalid GPIO 390
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.854587] export_store: invalid GPIO 390
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.858600] export_store: invalid GPIO 390
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.862738] export_store: invalid GPIO 390
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.866759] export_store: invalid GPIO 390
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.870918] export_store: invalid GPIO 425
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.874986] export_store: invalid GPIO 425
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.878998] export_store: invalid GPIO 425
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.883143] export_store: invalid GPIO 425
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.887155] export_store: invalid GPIO 425
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.891289] export_store: invalid GPIO 425
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.895314] export_store: invalid GPIO 425
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.899398] export_store: invalid GPIO 425
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.903551] export_store: invalid GPIO 425
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.907555] export_store: invalid GPIO 425
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.911690] export_store: invalid GPIO 425
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.915770] export_store: invalid GPIO 390
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.919795] export_store: invalid GPIO 390
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.924088] export_store: invalid GPIO 390
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.927956] export_store: invalid GPIO 390
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.932111] export_store: invalid GPIO 390
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.936113] export_store: invalid GPIO 390
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.940195] export_store: invalid GPIO 390
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.944344] export_store: invalid GPIO 390
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.948355] export_store: invalid GPIO 390
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.952495] export_store: invalid GPIO 390
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.956514] export_store: invalid GPIO 390
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.960634] export_store: invalid GPIO 425
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.964742] export_store: invalid GPIO 425
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.968753] export_store: invalid GPIO 425
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.972890] export_store: invalid GPIO 425
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.976917] export_store: invalid GPIO 425
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.980992] export_store: invalid GPIO 425
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.985134] export_store: invalid GPIO 425
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.989155] export_store: invalid GPIO 425
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.993294] export_store: invalid GPIO 425
Dec 31 18:00:21 DD-WRT kern.warn kernel: [   21.997312] export_store: invalid GPIO 425
Dec 31 18:00:22 DD-WRT kern.warn kernel: [   22.001483] export_store: invalid GPIO 425
Dec 31 18:00:22 DD-WRT user.info : [hwmon] : successfully started
Dec 31 18:00:22 DD-WRT kern.info kernel: [   22.291318] device eth0 entered promiscuous mode
Dec 31 18:00:22 DD-WRT kern.notice kernel: klogd: exiting
Dec 31 18:00:22 DD-WRT daemon.info smartd[1480]: smartd pre-7.4 2019-12-30 r5022 [armv7l-linux-6.1.84] (local build)
Dec 31 18:00:22 DD-WRT daemon.info smartd[1480]: Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
Dec 31 18:00:22 DD-WRT daemon.info smartd[1480]: Opened configuration file /usr/etc/smartd.conf
Dec 31 18:00:22 DD-WRT daemon.info smartd[1480]: Drive: DEVICESCAN, implied '-a' Directive on line 32 of file /usr/etc/smartd.conf
Dec 31 18:00:22 DD-WRT daemon.info smartd[1480]: Configuration file /usr/etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Dec 31 18:00:22 DD-WRT user.info : [telnetd] : successfully started
Dec 31 18:00:22 DD-WRT daemon.crit smartd[1480]: In the system's table of devices NO devices found to scan
Dec 31 18:00:22 DD-WRT daemon.info smartd[1480]: Unable to monitor any SMART enabled devices. Try debug (-d) option. Exiting...
Dec 31 18:00:22 DD-WRT user.info : [smartd] : Error on startup, returncode 17
Dec 31 18:00:22 DD-WRT user.info : [klogd] : kernel log daemon successfully stopped
Dec 31 18:00:22 DD-WRT syslog.info syslogd exiting
Dec 31 18:00:22 DD-WRT syslog.info syslogd started: BusyBox v1.36.1
Dec 31 18:00:22 DD-WRT kern.notice kernel: klogd started: BusyBox v1.36.1 (2024-04-09 06:14:27 +07)
Dec 31 18:00:22 DD-WRT kern.info kernel: [   22.481678] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
Dec 31 18:00:22 DD-WRT user.info : [cron] : successfully started
Dec 31 18:00:22 DD-WRT cron.info cron[1560]: (CRON) STARTUP (fork ok)
Dec 31 18:00:22 DD-WRT daemon.info dnsmasq[1565]: started, version 2.90 cachesize 1500
Dec 31 18:00:22 DD-WRT daemon.info dnsmasq[1565]: compile time options: IPv6 GNU-getopt no-DBus no-UBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP no-conntrack ipset no-nftset no-auth cryptohash DNSSEC loop-detect inotify no-dumpfile
Dec 31 18:00:22 DD-WRT daemon.info dnsmasq-dhcp[1565]: DHCP, IP range 192.168.1.64 -- 192.168.1.253, lease time 1d
Dec 31 18:00:22 DD-WRT user.info : [dnsmasq] : successfully started
Dec 31 18:00:22 DD-WRT daemon.info dnsmasq[1565]: using only locally-known addresses for test
Dec 31 18:00:22 DD-WRT daemon.info dnsmasq[1565]: using only locally-known addresses for onion
Dec 31 18:00:22 DD-WRT daemon.info dnsmasq[1565]: using only locally-known addresses for localhost
Dec 31 18:00:22 DD-WRT daemon.info dnsmasq[1565]: using only locally-known addresses for local
Dec 31 18:00:22 DD-WRT daemon.info dnsmasq[1565]: using only locally-known addresses for invalid
Dec 31 18:00:22 DD-WRT daemon.info dnsmasq[1565]: using only locally-known addresses for bind
Dec 31 18:00:22 DD-WRT daemon.warn dnsmasq[1565]: no servers found in /tmp/resolv.dnsmasq, will retry
Dec 31 18:00:22 DD-WRT daemon.info dnsmasq[1565]: read /etc/hosts - 2 names
Dec 31 18:00:24 DD-WRT kern.info kernel: [   24.490019] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Down
Dec 31 18:00:24 DD-WRT kern.info kernel: [   24.499184] ipq806x-gmac-dwmac 37200000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
Dec 31 18:00:24 DD-WRT kern.info kernel: [   24.509956] dwmac1000: Master AXI performs any burst length
Dec 31 18:00:24 DD-WRT kern.info kernel: [   24.509989] ipq806x-gmac-dwmac 37200000.ethernet eth0: No Safety Features support found
Dec 31 18:00:24 DD-WRT kern.info kernel: [   24.524401] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
Dec 31 18:00:24 DD-WRT kern.info kernel: [   24.524610] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
Dec 31 18:00:24 DD-WRT kern.info kernel: [   24.532332] ipq806x-gmac-dwmac 37200000.ethernet eth0: configuring for fixed/rgmii link mode
Dec 31 18:00:24 DD-WRT kern.info kernel: [   24.539174] device eth0 left promiscuous mode
Dec 31 18:00:24 DD-WRT kern.info kernel: [   24.548618] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
Dec 31 18:00:24 DD-WRT kern.info kernel: [   24.552604] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Dec 31 18:00:24 DD-WRT user.info : [udhcpc] : successfully started
Dec 31 18:00:24 DD-WRT user.info : [ttraff] : successfully started
Dec 31 18:00:24 DD-WRT user.info : [httpd] : Error on startup, returncode 15
Dec 31 18:00:24 DD-WRT user.info : [httpd] : daemon successfully stopped
Dec 31 18:00:24 DD-WRT daemon.info httpd[1693]: [httpd] : httpd server started at port 80
Dec 31 18:00:24 DD-WRT user.info : [httpd] : successfully started
Dec 31 18:00:24 DD-WRT user.info : [resetbutton] : daemon successfully stopped
Dec 31 18:00:24 DD-WRT user.info : [resetbutton] : successfully started
Dec 31 18:00:27 DD-WRT daemon.info dnsmasq-dhcp[1565]: DHCPDISCOVER(br0) 192.168.1.175 90:b1:1c:9c:f3:ef 
Dec 31 18:00:27 DD-WRT daemon.info dnsmasq-dhcp[1565]: DHCPOFFER(br0) 192.168.1.175 90:b1:1c:9c:f3:ef 
Dec 31 18:00:27 DD-WRT daemon.info dnsmasq-dhcp[1565]: DHCPREQUEST(br0) 192.168.1.175 90:b1:1c:9c:f3:ef 
Dec 31 18:00:27 DD-WRT daemon.info dnsmasq-dhcp[1565]: DHCPACK(br0) 192.168.1.175 90:b1:1c:9c:f3:ef daDeb
Dec 31 18:00:28 DD-WRT daemon.info dnsmasq[1565]: reading /tmp/resolv.dnsmasq
Dec 31 18:00:28 DD-WRT daemon.info dnsmasq[1565]: using nameserver 10.72.28.13#53
Dec 31 18:00:28 DD-WRT daemon.info dnsmasq[1565]: using only locally-known addresses for test
Dec 31 18:00:28 DD-WRT daemon.info dnsmasq[1565]: using only locally-known addresses for onion
Dec 31 18:00:28 DD-WRT daemon.info dnsmasq[1565]: using only locally-known addresses for localhost
Dec 31 18:00:28 DD-WRT daemon.info dnsmasq[1565]: using only locally-known addresses for local
Dec 31 18:00:28 DD-WRT daemon.info dnsmasq[1565]: using only locally-known addresses for invalid
Dec 31 18:00:28 DD-WRT daemon.info dnsmasq[1565]: using only locally-known addresses for bind
Dec 31 18:00:28 DD-WRT daemon.info dnsmasq[1565]: read /etc/hosts - 2 names
Dec 31 18:00:28 DD-WRT user.info : [wland] : daemon successfully stopped
Dec 31 18:00:28 DD-WRT user.info : [wland] : successfully started
Dec 31 18:00:28 DD-WRT user.info : [wan] : WAN is up. IP: 10.72.28.111
Dec 31 18:00:28 DD-WRT daemon.info dnsmasq[1565]: exiting on receipt of SIGTERM
Dec 31 18:00:28 DD-WRT user.info : [dnsmasq] : daemon successfully stopped
Dec 31 18:00:28 DD-WRT daemon.info dnsmasq[1871]: started, version 2.90 cachesize 1500
Dec 31 18:00:28 DD-WRT daemon.info dnsmasq[1871]: compile time options: IPv6 GNU-getopt no-DBus no-UBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP no-conntrack ipset no-nftset no-auth cryptohash DNSSEC loop-detect inotify no-dumpfile
Dec 31 18:00:28 DD-WRT daemon.info dnsmasq-dhcp[1871]: DHCP, IP range 192.168.1.64 -- 192.168.1.253, lease time 1d
Dec 31 18:00:28 DD-WRT daemon.info dnsmasq[1871]: using only locally-known addresses for test
Dec 31 18:00:28 DD-WRT daemon.info dnsmasq[1871]: using only locally-known addresses for onion
Dec 31 18:00:28 DD-WRT daemon.info dnsmasq[1871]: using only locally-known addresses for localhost
Dec 31 18:00:28 DD-WRT daemon.info dnsmasq[1871]: using only locally-known addresses for local
Dec 31 18:00:28 DD-WRT daemon.info dnsmasq[1871]: using only locally-known addresses for invalid
Dec 31 18:00:28 DD-WRT daemon.info dnsmasq[1871]: using only locally-known addresses for bind
Dec 31 18:00:28 DD-WRT user.info : [dnsmasq] : successfully started
Dec 31 18:00:28 DD-WRT daemon.info dnsmasq[1871]: reading /tmp/resolv.dnsmasq
Dec 31 18:00:28 DD-WRT daemon.info dnsmasq[1871]: using nameserver 10.72.28.13#53
Dec 31 18:00:28 DD-WRT daemon.info dnsmasq[1871]: using only locally-known addresses for test
Dec 31 18:00:28 DD-WRT daemon.info dnsmasq[1871]: using only locally-known addresses for onion
Dec 31 18:00:28 DD-WRT daemon.info dnsmasq[1871]: using only locally-known addresses for localhost
Dec 31 18:00:28 DD-WRT daemon.info dnsmasq[1871]: using only locally-known addresses for local
Dec 31 18:00:28 DD-WRT daemon.info dnsmasq[1871]: using only locally-known addresses for invalid
Dec 31 18:00:28 DD-WRT daemon.info dnsmasq[1871]: using only locally-known addresses for bind
Dec 31 18:00:28 DD-WRT daemon.info dnsmasq[1871]: read /etc/hosts - 2 names
Dec 31 18:00:29 DD-WRT user.info : [vpn modules] : vpn modules successfully unloaded
Dec 31 18:00:29 DD-WRT user.info : [vpn modules] : nf_conntrack_proto_gre successfully loaded
Dec 31 18:00:29 DD-WRT user.info : [vpn modules] : nf_nat_proto_gre successfully loaded
Dec 31 18:00:29 DD-WRT user.info : [vpn modules] : nf_conntrack_pptp successfully loaded
Dec 31 18:00:29 DD-WRT user.info : [vpn modules] : nf_nat_pptp successfully loaded
Dec 31 18:00:30 DD-WRT user.info : [process_monitor] : successfully started
Dec 31 18:00:30 DD-WRT daemon.debug ntpclient[2037]: Connecting to 2.pool.ntp.org [5.78.62.36] ...
Apr  9 14:02:23 DD-WRT daemon.info ntpclient[2037]: Time set from 2.pool.ntp.org [5.78.62.36].
Apr  9 14:02:23 DD-WRT daemon.info process_monitor[2036]: Cyclic NTP Update success (servers 2.pool.ntp.org 212.18.3.19 88.99.174.22)
Apr  9 14:02:23 DD-WRT daemon.info process_monitor[2036]: Local timer delta is 1712689313
Apr  9 14:02:23 DD-WRT daemon.debug process_monitor[2036]: Restarting cron (time sync change)
Apr  9 14:02:23 DD-WRT user.info : [cron] : daemon successfully stopped
Apr  9 14:02:23 DD-WRT user.info : [cron] : successfully started
Apr  9 14:02:23 DD-WRT daemon.debug process_monitor[2036]: We need to re-update after 3600 seconds
Apr  9 14:02:23 DD-WRT daemon.info process_monitor[2036]: [process_monitor] : set timer: 3600 seconds, callback: ntp_main()
Apr  9 14:02:23 DD-WRT cron.info cron[2060]: (CRON) STARTUP (fork ok)
Apr  9 14:02:23 DD-WRT daemon.info process_monitor[2036]: [process_monitor] : cleanup timers
Apr  9 14:02:23 DD-WRT user.info : [process_monitor] : daemon successfully stopped
Apr  9 14:02:23 DD-WRT user.info : [process_monitor] : successfully started
Apr  9 14:02:23 DD-WRT daemon.debug ntpclient[2074]: Connecting to 2.pool.ntp.org [5.78.62.36] ...
Apr  9 14:02:23 DD-WRT daemon.info ntpclient[2074]: Time set from 2.pool.ntp.org [5.78.62.36].
Apr  9 14:02:23 DD-WRT daemon.info process_monitor[2073]: Cyclic NTP Update success (servers 2.pool.ntp.org 212.18.3.19 88.99.174.22)
Apr  9 14:02:23 DD-WRT daemon.info process_monitor[2073]: Local timer delta is 0
Apr  9 14:02:24 DD-WRT daemon.debug process_monitor[2073]: We need to re-update after 3600 seconds
Apr  9 14:02:24 DD-WRT daemon.info process_monitor[2073]: [process_monitor] : set timer: 3600 seconds, callback: ntp_main()
Apr  9 14:02:25 DD-WRT user.info : [vpn modules] : vpn modules successfully unloaded
Apr  9 14:02:25 DD-WRT user.info : [vpn modules] : nf_conntrack_proto_gre successfully loaded
Apr  9 14:02:25 DD-WRT user.info : [vpn modules] : nf_nat_proto_gre successfully loaded
Apr  9 14:02:25 DD-WRT user.info : [vpn modules] : nf_conntrack_pptp successfully loaded
Apr  9 14:02:25 DD-WRT user.info : [vpn modules] : nf_nat_pptp successfully loaded
Apr  9 14:02:32 DD-WRT user.debug : ttraff: data collection started
Apr  9 14:03:11 DD-WRT auth.info login[2329]: root login on 'pts/0'
root@DD-WRT:~# uptime && date
 14:06:11 up 4 min,  load average: 0.01, 0.07, 0.03
Tue Apr  9 14:06:11 CDT 2024
root@DD-WRT:~# 
Connection closed by foreign host.
mrjcd@daDeb:~$ neofetch
       _,met$$$$$gg.          mrjcd@daDeb 
    ,g$$$$$$$$$$$$$$$P.       ----------- 
  ,g$$P"     """Y$$.".        OS: Debian GNU/Linux trixie/sid x86_64 
 ,$$P'              `$$$.     Host: OptiPlex 7010 01 
',$$P       ,ggs.     `$$b:   Kernel: 6.6.15-amd64 
`d$$'     ,$P"'   .    $$$    Uptime: 1 day, 18 hours, 41 mins 
 $$P      d$'     ,    $$P    Packages: 2721 (dpkg) 
 $$:      $$.   -    ,d$$'    Shell: bash 5.2.21 
 $$;      Y$b._   _,d$P'      Resolution: 1600x900 
 Y$$.    `.`"Y$$$$P"'         DE: GNOME 44.9 
 `$$b      "-.__              WM: Mutter 
  `Y$$                        WM Theme: Adwaita 
   `Y$$.                      Theme: Adwaita [GTK2/3] 
     `$$b.                    Icons: gnome [GTK2/3] 
       `Y$$b.                 Terminal: gnome-terminal 
          `"Y$b._             CPU: Intel i5-3570 (4) @ 3.800GHz 
              `"""            GPU: NVIDIA GeForce GT 1030 
                              Memory: 1419MiB / 15957MiB 

                                                      


mrjcd@daDeb:~$ date
Tue Apr  9 02:06:24 PM CDT 2024
mrjcd@daDeb:~$ 

 ************************
 STILL CANNOT GET boot_part or switch

mrjcd@daDeb:~$ telnet 192.168.1.1
Trying 192.168.1.1...
Connected to 192.168.1.1.
Escape character is '^]'.

DD-WRT v3.0-r55723 std (c) 2024 NewMedia-NET GmbH
Release: 04/09/24
Board: Linksys EA8500

DD-WRT login: root
Password: 
==========================================================
 
     ___  ___     _      _____  ______       ____  ___ 
    / _ \/ _ \___| | /| / / _ \/_  __/ _  __|_  / / _ \
   / // / // /___/ |/ |/ / , _/ / /   | |/ //_ <_/ // /
  /____/____/    |__/|__/_/|_| /_/    |___/____(_)___/ 
                                                     
                       DD-WRT v3.0
                   https://www.dd-wrt.com


==========================================================


BusyBox v1.36.1 (2024-04-09 06:14:27 +07) built-in shell (ash)

root@DD-WRT:~# ubootenv get boot_part
read size Fail. [request 131072 bytes / read 0 bytes offset 0]
increase offset to work around faulty nand flash memories
read size Fail. [request 131072 bytes / read 0 bytes offset 131072]
increase offset to work around faulty nand flash memories
read size Fail. [request 131072 bytes / read 0 bytes offset 262144]
increase offset to work around faulty nand flash memories
fseek(0x60000,SEEK_SET) Fail. [Invalid argument]
root@DD-WRT:~# 
Connection closed by foreign host.
mrjcd@daDeb:~$