mrjcd@DebLynn:~$ ssh root@citadel-station-homeworld.mrjcd.com
DD-WRT v3.0-r52189 std (c) 2023 NewMedia-NET GmbH
Release: 03/28/23
Board: Linksys EA8500
==========================================================
___ ___ _ _____ ______ ____ ___
/ _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \
/ // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // /
/____/____/ |__/|__/_/|_| /_/ |___/____(_)___/
DD-WRT v3.0
https://www.dd-wrt.com
==========================================================
BusyBox v1.36.0 (2023-03-28 02:03:26 +07) built-in shell (ash)
root@Citadel-Station-Homeworld:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.337 (root@server2) (gcc version 12.1.0 (OpenWrt GCC 12.1.0 r19551+6-d9ea9c06e9) ) #1739 SMP Tue Mar 28 02:02:03 +07 2023
[ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt:Machine model: Linksys EA8500 WiFi Router
[ 0.000000] OF: fdt:Ignoring memory range 0x41500000 - 0x42000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 122880
[ 0.000000] free_area_init_node: node 0, pgdat c0c2ea00, node_mem_map ddc39000
[ 0.000000] Normal zone: 960 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 122880 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 12 pages/cpu s19212 r8192 d21748 u49152
[ 0.000000] pcpu-alloc: s19212 r8192 d21748 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920
[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:14
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 477248K/491520K available (6144K kernel code, 190K rwdata, 1028K rodata, 1024K init, 363K bss, 14272K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xde800000 - 0xff800000 ( 528 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc0900000 (7136 kB)
[ 0.000000] .init : 0xc0b00000 - 0xc0c00000 (1024 kB)
[ 0.000000] .data : 0xc0c00000 - 0xc0c2f850 ( 191 kB)
[ 0.000000] .bss : 0xc0c31000 - 0xc0c8bdf4 ( 364 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[ 0.000008] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[ 0.000021] Switching to timer-based delay loop, resolution 160ns
[ 0.000229] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[ 0.000250] pid_max: default: 32768 minimum: 301
[ 0.000355] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000368] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000944] CPU: Testing write buffer coherency: ok
[ 0.001232] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001634] Setting up static identity map for 0x42300000 - 0x4230003c
[ 0.003873] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.004051] Brought up 2 CPUs
[ 0.004071] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[ 0.004081] CPU: All CPU(s) started in SVC mode.
[ 0.016137] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[ 0.016330] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.016354] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.016416] pinctrl core: initialized pinctrl subsystem
[ 0.017960] NET: Registered protocol family 16
[ 0.018312] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.041402] cpuidle: using governor ladder
[ 0.094282] msm_bus_fabric_init_driver
[ 0.095521] pps_core: LinuxPPS API ver. 1 registered
[ 0.095536] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.095571] PTP clock support registered
[ 0.097737] clocksource: Switched to clocksource dg_timer
[ 0.101703] NET: Registered protocol family 2
[ 0.101931] IP idents hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.102684] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.102720] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.102774] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.102832] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.102856] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.103027] NET: Registered protocol family 1
[ 0.103073] PCI: CLS 0 bytes, default 64
[ 0.106893] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.116200] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.122440] cryptodev: driver 1.9 loaded.
[ 0.122475] io scheduler noop registered
[ 0.122488] io scheduler deadline registered (default)
[ 0.124172] 1b500000.pci supply vdda not found, using dummy regulator
[ 0.124277] 1b500000.pci supply vdda_phy not found, using dummy regulator
[ 0.124357] 1b500000.pci supply vdda_refclk not found, using dummy regulator
[ 0.125081] OF: PCI: host bridge /soc/pci@1b500000 ranges:
[ 0.125122] OF: PCI: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[ 0.125147] OF: PCI: MEM 0x08000000..0x0fdfffff -> 0x08000000
[ 0.228114] qcom-pcie 1b500000.pci: link up
[ 0.228295] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[ 0.228317] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.228334] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
[ 0.228349] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[ 0.228399] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.228552] pci 0000:00:00.0: supports D1
[ 0.228563] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.228866] PCI: bus0: Fast back to back transfers disabled
[ 0.229187] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.229432] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.230593] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.230994] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
[ 0.231248] PCI: bus1: Fast back to back transfers disabled
[ 0.231528] pci 0000:00:00.0: BAR 14: assigned [mem 0x08000000-0x081fffff]
[ 0.231554] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[ 0.231687] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.231709] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
[ 0.232121] aer 0000:00:00.0:pcie002: service driver aer loaded
[ 0.232574] 1b700000.pci supply vdda not found, using dummy regulator
[ 0.232682] 1b700000.pci supply vdda_phy not found, using dummy regulator
[ 0.232765] 1b700000.pci supply vdda_refclk not found, using dummy regulator
[ 0.233489] OF: PCI: host bridge /soc/pci@1b700000 ranges:
[ 0.233524] OF: PCI: IO 0x31e00000..0x31efffff -> 0x31e00000
[ 0.233543] OF: PCI: MEM 0x2e000000..0x31dfffff -> 0x2e000000
[ 0.338109] qcom-pcie 1b700000.pci: link up
[ 0.338283] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[ 0.338300] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.338314] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[ 0.338357] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.338480] pci 0001:00:00.0: supports D1
[ 0.338489] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[ 0.338745] PCI: bus0: Fast back to back transfers disabled
[ 0.339043] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.339266] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.340336] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.340935] PCI: bus1: Fast back to back transfers disabled
[ 0.341300] pci 0001:00:00.0: BAR 14: assigned [mem 0x2e000000-0x2e1fffff]
[ 0.341323] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[ 0.341443] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 0.341463] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
[ 0.341842] aer 0001:00:00.0:pcie002: service driver aer loaded
[ 0.342283] 1b900000.pci supply vdda not found, using dummy regulator
[ 0.342377] 1b900000.pci supply vdda_phy not found, using dummy regulator
[ 0.342459] 1b900000.pci supply vdda_refclk not found, using dummy regulator
[ 0.343191] OF: PCI: host bridge /soc/pci@1b900000 ranges:
[ 0.343227] OF: PCI: IO 0x35e00000..0x35efffff -> 0x35e00000
[ 0.343253] OF: PCI: MEM 0x32000000..0x35dfffff -> 0x32000000
[ 1.348096] qcom-pcie 1b900000.pci: phy link never came up
[ 1.349944] qcom-pcie 1b900000.pci: hostinit failed
[ 1.350687] deviceless supply s1b not found, using dummy regulator
[ 1.352226] L2 @ QSB rate. Forcing new rate.
[ 1.352388] L2 @ 800000 KHz
[ 1.352497] CPU0 @ 800000 KHz
[ 1.352508] CPU1 @ QSB rate. Forcing new rate.
[ 1.352628] CPU1 @ 800000 KHz
[ 1.354702] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[ 1.356391] serial8250_init
[ 1.356403] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 1.357373] msm_serial 16340000.serial: msm_serial: detected port #0
[ 1.357447] msm_serial 16340000.serial: uartclk = 7372800
[ 1.357504] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 201, base_baud = 460800) is a MSM
[ 1.357537] msm_serial: console setup on port #0
[ 2.118467] console [ttyMSM0] enabled
[ 2.123168] msm_serial: driver initialized
[ 2.128466] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
[ 2.130554] nand: AMD/Spansion S34MS01G2
[ 2.137062] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 2.447902] random: crng init done
[ 2.622090] found squashfs at 1280000 with len of 21495808 bytes
[ 3.102591] found squashfs at 3A80000 with len of 21495808 bytes
[ 3.102632] 19 ofpart partitions found on MTD device qcom_nand.0
[ 3.107660] Creating 19 MTD partitions on "qcom_nand.0":
[ 3.113741] 0x000000000000-0x000000040000 : "SBL1"
[ 3.120375] 0x000000040000-0x000000180000 : "MIBIB"
[ 3.125986] 0x000000180000-0x0000002c0000 : "SBL2"
[ 3.130878] 0x0000002c0000-0x000000540000 : "SBL3"
[ 3.137310] 0x000000540000-0x000000660000 : "DDRCONFIG"
[ 3.140524] 0x000000660000-0x000000780000 : "SSD"
[ 3.145496] 0x000000780000-0x000000a00000 : "TZ"
[ 3.152413] 0x000000a00000-0x000000c80000 : "RPM"
[ 3.156892] 0x000000c80000-0x000000dc0000 : "art"
[ 3.159684] 0x000000dc0000-0x000000ec0000 : "APPSBL"
[ 3.164107] 0x000000ec0000-0x000000f00000 : "u_env"
[ 3.168232] 0x000000f00000-0x000000f40000 : "s_env"
[ 3.172648] 0x000000f40000-0x000000f80000 : "devinfo"
[ 3.177727] 0x000000f80000-0x000003780000 : "linux"
[ 3.235673] 0x000001280000-0x000002700000 : "rootfs"
[ 3.263827] mtd: partition "rootfs" set to be root filesystem
[ 3.263859] 0x000003780000-0x000005f40000 : "linux2"
[ 3.321997] 0x000003a80000-0x000004f00000 : "rootfs2"
[ 3.350326] 0x000005f40000-0x000005f80000 : "nvram"
[ 3.351503] 0x000005f80000-0x000008000000 : "ddwrt"
[ 3.424757] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
[ 4.259168] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 4.259197] Ring mode enabled
[ 4.263192] DMA HW capability register supported
[ 4.266145] Enhanced/Alternate descriptors
[ 4.271788] Enabled extended descriptors
[ 4.274744] RX Checksum Offload Engine supported
[ 4.278980] COE Type 2
[ 4.283594] TX Checksum insertion supported
[ 4.285856] Wake-Up On Lan supported
[ 4.290451] eth%d: device MAC address 00:06:3b:01:41:00
[ 4.293931] Enable RX Mitigation via HW Watchdog Timer
[ 4.300308] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 4.304252] Ring mode enabled
[ 4.309449] DMA HW capability register supported
[ 4.312334] Enhanced/Alternate descriptors
[ 4.317973] Enabled extended descriptors
[ 4.320997] RX Checksum Offload Engine supported
[ 4.325100] COE Type 2
[ 4.329839] TX Checksum insertion supported
[ 4.332043] Wake-Up On Lan supported
[ 4.336560] eth%d: device MAC address 00:03:7f:ba:db:02
[ 4.340178] Enable RX Mitigation via HW Watchdog Timer
[ 4.345988] i2c /dev entries driver
[ 4.351047] Calibration not found.
[ 4.354929] CPUidle arm: CPU 0 failed to init idle CPU ops
[ 4.357778] GACT probability NOT on
[ 4.362841] Mirror/redirect action on
[ 4.366185] Simple TC action Loaded
[ 4.370608] netem: version 1.3
[ 4.373303] u32 classifier
[ 4.376400] Performance counters on
[ 4.379166] input device check on
[ 4.382824] Actions configured
[ 4.386650] Netfilter messages via NETLINK v0.30.
[ 4.390260] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 4.395334] nf_conntrack_rtsp v0.7 loading
[ 4.401048] xt_time: kernel timezone is -0000
[ 4.404714] ip_set: protocol 6
[ 4.409380] gre: GRE over IPv4 demultiplexor driver
[ 4.412512] nf_nat_rtsp v0.7 loading
[ 4.416876] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.420940] NET: Registered protocol family 17
[ 4.426041] Bridge firewalling registered
[ 4.430277] 8021q: 802.1Q VLAN Support v1.8
[ 4.434452] Registering SWP/SWPB emulation handler
[ 4.438700] registered taskstats version 1
[ 4.452329] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
[ 4.470855] s1a: Bringing 0uV into 1050000-1050000uV
[ 4.471115] s1b: Bringing 0uV into 1050000-1050000uV
[ 4.475085] s2a: Bringing 0uV into 800000-800000uV
[ 4.480120] s2b: Bringing 0uV into 800000-800000uV
[ 4.488296] trying to register driver cpufreq-dt
[ 4.490719] searching for nvram
[ 4.493998] nvram size = 262144
[ 4.573296] found nvram at 20000
[ 4.613999] no valid UBI magic found inside mtd13
[ 4.614053] hctosys: unable to open rtc device (rtc0)
[ 4.619732] rootfs: allocate skip block area for 0x000000A4 blocks with 0x01480000 bytes
[ 4.651400] VFS: Mounted root (squashfs filesystem) readonly on device 31:14.
[ 4.652120] Freeing unused kernel memory: 1024K
[ 8.203971] devinfo: allocate skip block area for 0x00000002 blocks with 0x00040000 bytes
[ 8.216607] art: allocate skip block area for 0x0000000A blocks with 0x00140000 bytes
[ 8.931182] Loading modules backported from Linux version v5.15.33-0-g06f50ca83ace
[ 8.931213] Backport generated by backports.git v5.15.33-1-0-g183c4ab2
[ 9.438251] ath9k: ath9k: Driver unloaded
[ 9.766889] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 9.767602] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 9.958025] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[ 10.273781] ath10k_pci 0000:01:00.0: found firmware features ie (8 B)
[ 10.273819] ath10k_pci 0000:01:00.0: Unknown FW IE: 30
[ 10.279294] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
[ 10.284242] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[ 10.296158] ath10k_pci 0000:01:00.0: firmware ver 10.4-ddwrt-9980-tW-13-7174 api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate,superchannel crc32 82bac4dd
[ 10.359876] ath10k_pci 0000:01:00.0: boot get otp board id result 0x00008800 board_id 2 chip_id 1 ext_bid_support 0
[ 10.363173] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=2'
[ 10.369193] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=2'
[ 10.391702] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:2 crc32 e4a0f655
[ 10.412850] ath10k_pci 0000:01:00.0: boot already acquired valid otp board id,skip download, board_id 2 chip_id 1
[ 10.433430] ath10k_pci 0000:01:00.0: boot upload otp to 0x1234 len 11240
[ 11.496822] ath10k_pci 0000:01:00.0: Init Max Stations to 64
[ 11.497442] ath10k_pci 0000:01:00.0: wmi event service ready min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000185b vht_cap 0x339b79b2 vht_supp_mcs 0x0000ffaa sw_ver0 0x01000000 sw_ver1 0x00000032 fw_build 0x00000000 phy_capab 0x00000002 num_rf_chains 0x00000004 eeprom_rd 0x00000000 low_2ghz_chan 2312 high_2ghz_chan 2732 low_5ghz_chan 4912 high_5ghz_chan 6100 num_mem_reqs 0x00000007 min_pkt_size_enable 0x00000000
[ 11.589019] ath10k_pci 0000:01:00.0: wmi debug print truncated: 128
[ 11.589040] ath10k_pci 0000:01:00.0: ChipType 1200 ChipTypeID 30 BoardID 1 P 80/80 V 16 K 160 PH 272 T 282 msdu-desc: 2500 sw-crypt: 0
[ 11.594140] ath10k_pci 0000:01:00.0: free: 18508 iram: 32080 sram: 18092
[ 11.606640] ath10k_pci 0000:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr 14:91:82:7d:ef:7d status 0
[ 11.645300] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 64 raw 0 hwcrypto 1
[ 11.760564] ath10k_pci 0000:01:00.0: init channel number 86
[ 11.760602] ath: EEPROM regdomain sanitized
[ 11.760610] ath: EEPROM regdomain: 0x64
[ 11.760617] ath: EEPROM indicates we should expect a direct regpair map
[ 11.760634] ath: Country alpha2 being used: 00
[ 11.760640] ath: Regpair used: 0x64
[ 11.760704] initialize fq_codel with 33554432 bytes memory limit
[ 11.765088] ieee80211_txq_setup_flows: set limit to 4194304 bytes
[ 11.778189] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[ 11.778863] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 11.983654] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[ 11.983714] ath10k_pci 0001:01:00.0: found firmware features ie (8 B)
[ 11.993373] ath10k_pci 0001:01:00.0: Unknown FW IE: 30
[ 11.999847] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
[ 12.004799] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[ 12.017733] ath10k_pci 0001:01:00.0: firmware ver 10.4-ddwrt-9980-tW-13-7174 api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate,superchannel crc32 82bac4dd
[ 12.080165] ath10k_pci 0001:01:00.0: boot get otp board id result 0x00008400 board_id 1 chip_id 1 ext_bid_support 0
[ 12.083470] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=1'
[ 12.089503] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=1'
[ 12.099566] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:1 crc32 e4a0f655
[ 12.128265] ath10k_pci 0001:01:00.0: boot already acquired valid otp board id,skip download, board_id 1 chip_id 1
[ 12.148760] ath10k_pci 0001:01:00.0: boot upload otp to 0x1234 len 11240
[ 13.208633] ath10k_pci 0001:01:00.0: Init Max Stations to 64
[ 13.209274] ath10k_pci 0001:01:00.0: wmi event service ready min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000185b vht_cap 0x339b79b2 vht_supp_mcs 0x0000ffaa sw_ver0 0x01000000 sw_ver1 0x00000032 fw_build 0x00000000 phy_capab 0x00000001 num_rf_chains 0x00000004 eeprom_rd 0x00000000 low_2ghz_chan 2312 high_2ghz_chan 2732 low_5ghz_chan 4912 high_5ghz_chan 6100 num_mem_reqs 0x00000007 min_pkt_size_enable 0x00000000
[ 13.298156] ath10k_pci 0001:01:00.0: wmi debug print truncated: 128
[ 13.298182] ath10k_pci 0001:01:00.0: ChipType 1200 ChipTypeID 30 BoardID 2 P 80/80 V 16 K 160 PH 272 T 282 msdu-desc: 2500 sw-crypt: 0
[ 13.303302] ath10k_pci 0001:01:00.0: free: 18508 iram: 32080 sram: 18092
[ 13.315787] ath10k_pci 0001:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr 14:91:82:7d:ef:7d status 0
[ 13.352497] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 64 raw 0 hwcrypto 1
[ 13.452123] ath10k_pci 0001:01:00.0: init channel number 134
[ 13.452154] ath: EEPROM regdomain sanitized
[ 13.452160] ath: EEPROM regdomain: 0x64
[ 13.452165] ath: EEPROM indicates we should expect a direct regpair map
[ 13.452178] ath: Country alpha2 being used: 00
[ 13.452182] ath: Regpair used: 0x64
[ 13.452236] initialize fq_codel with 33554432 bytes memory limit
[ 13.456935] ieee80211_txq_setup_flows: set limit to 33554432 bytes
[ 14.574579] dwmac1000: Master AXI performs any burst length
[ 14.574645] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 14.579327] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[ 14.606025] dwmac1000: Master AXI performs any burst length
[ 14.606087] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 14.610749] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 15.608140] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 15.688137] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 16.686340] device br0 entered promiscuous mode
[ 16.741970] dwmac1000: Master AXI performs any burst length
[ 16.742010] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 16.746456] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 16.778666] dwmac1000: Master AXI performs any burst length
[ 16.778705] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 16.783157] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 16.794178] br0: port 1(eth1) entered blocking state
[ 16.799015] br0: port 1(eth1) entered disabled state
[ 16.804321] device eth1 entered promiscuous mode
[ 16.809212] br0: port 1(eth1) entered blocking state
[ 16.813679] br0: port 1(eth1) entered forwarding state
[ 16.824007] device br0 left promiscuous mode
[ 16.831203] device br0 entered promiscuous mode
[ 16.899555] device br0 left promiscuous mode
[ 16.958155] ath: EEPROM regdomain: 0x8348
[ 16.958161] ath: EEPROM indicates we should expect a country code
[ 16.958166] ath: doing EEPROM country->regdmn map search
[ 16.958169] ath: country maps to regdmn code: 0x3a
[ 16.958173] ath: Country alpha2 being used: US
[ 16.958176] ath: Regpair used: 0x3a
[ 16.958180] ath: regdomain 0x8348 dynamically updated by user
[ 16.958248] ath: EEPROM regdomain: 0x8348
[ 16.958251] ath: EEPROM indicates we should expect a country code
[ 16.958255] ath: doing EEPROM country->regdmn map search
[ 16.958258] ath: country maps to regdmn code: 0x3a
[ 16.958261] ath: Country alpha2 being used: US
[ 16.958264] ath: Regpair used: 0x3a
[ 16.958267] ath: regdomain 0x8348 dynamically updated by user
[ 16.970752] ath10k_pci 0001:01:00.0: Init Channel Number 57
[ 17.688152] br0: port 1(eth1) entered disabled state
[ 17.848140] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 17.848175] br0: port 1(eth1) entered blocking state
[ 17.855977] br0: port 1(eth1) entered forwarding state
[ 20.008128] ath10k_pci 0001:01:00.0: wmi command 36872 timeout, restarting hardware
[ 20.008172] ath10k_pci 0001:01:00.0: write_file_turboqam->failed to update channel list: -108
[ 20.035014] ath10k_pci 0001:01:00.0: user requested fw restart
[ 20.047936] ath10k_pci 0001:01:00.0: cannot restart a device that hasn't been started
[ 20.119838] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0-vanilla/firmware-6.bin failed with error -2
[ 20.328508] ath10k_pci 0001:01:00.0: found firmware features ie (4 B)
[ 20.328544] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
[ 20.333927] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[ 20.345322] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.18-00002 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 4716237b
[ 20.409235] ath10k_pci 0001:01:00.0: boot get otp board id result 0x00008400 board_id 1 chip_id 1 ext_bid_support 0
[ 20.412520] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=1'
[ 20.418534] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=1'
[ 20.428114] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:1 crc32 e4a0f655
[ 20.457285] ath10k_pci 0001:01:00.0: boot already acquired valid otp board id,skip download, board_id 1 chip_id 1
[ 20.477746] ath10k_pci 0001:01:00.0: boot upload otp to 0x1234 len 11240
[ 21.626390] ath10k_pci 0001:01:00.0: Init Max Stations to 512
[ 21.627788] ath10k_pci 0001:01:00.0: wmi event service ready min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000185b vht_cap 0x339b79b2 vht_supp_mcs 0x0000ffaa sw_ver0 0x01000000 sw_ver1 0x00000002 fw_build 0x00000000 phy_capab 0x00000001 num_rf_chains 0x00000004 eeprom_rd 0x00000000 low_2ghz_chan 2312 high_2ghz_chan 2732 low_5ghz_chan 4912 high_5ghz_chan 6100 num_mem_reqs 0x00000008 min_pkt_size_enable 0x00000000
[ 21.717205] ath10k_pci 0001:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr 14:91:82:7d:ef:7d status 0
[ 21.746768] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[ 21.841671] ath10k_pci 0001:01:00.0: init channel number 56
[ 21.855451] ath10k_pci 0001:01:00.0: Core CLK 300
[ 21.855474] ath10k_pci 0001:01:00.0: Mac CLK 150
[ 22.655543] ath10k_pci 0001:01:00.0: boot get otp board id result 0x00008400 board_id 1 chip_id 1 ext_bid_support 0
[ 22.679279] ath10k_pci 0001:01:00.0: boot upload otp to 0x1234 len 11240
[ 23.827972] ath10k_pci 0001:01:00.0: Init Max Stations to 512
[ 23.828002] ath10k_pci 0001:01:00.0: wmi event service ready min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000185b vht_cap 0x339b79b2 vht_supp_mcs 0x0000ffaa sw_ver0 0x01000000 sw_ver1 0x00000002 fw_build 0x00000000 phy_capab 0x00000001 num_rf_chains 0x00000004 eeprom_rd 0x00000000 low_2ghz_chan 2312 high_2ghz_chan 2732 low_5ghz_chan 4912 high_5ghz_chan 6100 num_mem_reqs 0x00000008 min_pkt_size_enable 0x00000000
[ 23.918796] ath10k_pci 0001:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr 14:91:82:7d:ef:7d status 0
[ 24.035245] ath10k_pci 0001:01:00.0: Init Channel Number 56
[ 24.035446] ath10k_pci 0001:01:00.0: set base mac addr 14:91:82:7d:ef:80
[ 24.036009] ath10k_pci 0001:01:00.0: bdf failsafe status event received from fw: 0
[ 24.079239] br0: port 2(wlan1) entered blocking state
[ 24.079259] br0: port 2(wlan1) entered disabled state
[ 24.083460] device wlan1 entered promiscuous mode
[ 24.867468] ath10k_pci 0001:01:00.0: mac txpower 30
[ 24.869449] ath10k_pci 0001:01:00.0: mac txpower 30
[ 24.871202] br0: port 2(wlan1) entered blocking state
[ 24.876004] br0: port 2(wlan1) entered forwarding state
[ 24.932752] br1: port 1(wlan1.1) entered blocking state
[ 24.932775] br1: port 1(wlan1.1) entered disabled state
[ 24.936978] device wlan1.1 entered promiscuous mode
[ 24.950280] ath10k_pci 0001:01:00.0: mac txpower 30
[ 24.959290] br1: port 1(wlan1.1) entered blocking state
[ 24.987514] ath10k_pci 0001:01:00.0: mac txpower 30
[ 24.996299] ath10k_pci 0001:01:00.0: mac txpower 30
[ 25.083265] ath10k_pci 0001:01:00.0: Init Channel Number 56
[ 25.093386] ath10k_pci 0000:01:00.0: Init Channel Number 66
[ 28.168137] ath10k_pci 0000:01:00.0: wmi command 36872 timeout, restarting hardware
[ 28.168177] ath10k_pci 0000:01:00.0: write_file_turboqam->failed to update channel list: -108
[ 28.189036] ath10k_pci 0000:01:00.0: user requested fw restart
[ 28.207908] ath10k_pci 0000:01:00.0: cannot restart a device that hasn't been started
[ 28.287580] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0-vanilla/firmware-6.bin failed with error -2
[ 28.287617] ath10k_pci 0000:01:00.0: found firmware features ie (4 B)
[ 28.297935] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
[ 28.304367] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[ 28.315829] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.18-00002 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 4716237b
[ 28.379876] ath10k_pci 0000:01:00.0: boot get otp board id result 0x00008800 board_id 2 chip_id 1 ext_bid_support 0
[ 28.383168] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=2'
[ 28.389178] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=2'
[ 28.398734] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:2 crc32 e4a0f655
[ 28.428010] ath10k_pci 0000:01:00.0: boot already acquired valid otp board id,skip download, board_id 2 chip_id 1
[ 28.448609] ath10k_pci 0000:01:00.0: boot upload otp to 0x1234 len 11240
[ 29.600994] ath10k_pci 0000:01:00.0: Init Max Stations to 512
[ 29.602397] ath10k_pci 0000:01:00.0: wmi event service ready min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000185b vht_cap 0x339b79b2 vht_supp_mcs 0x0000ffaa sw_ver0 0x01000000 sw_ver1 0x00000002 fw_build 0x00000000 phy_capab 0x00000002 num_rf_chains 0x00000004 eeprom_rd 0x00000000 low_2ghz_chan 2312 high_2ghz_chan 2732 low_5ghz_chan 4912 high_5ghz_chan 6100 num_mem_reqs 0x00000008 min_pkt_size_enable 0x00000000
[ 29.693640] ath10k_pci 0000:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr 14:91:82:7d:ef:7d status 0
[ 29.723770] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[ 29.820099] ath10k_pci 0000:01:00.0: init channel number 14
[ 29.833993] ath10k_pci 0000:01:00.0: Core CLK 300
[ 29.834017] ath10k_pci 0000:01:00.0: Mac CLK 150
[ 30.175774] ath10k_pci 0000:01:00.0: boot get otp board id result 0x00008800 board_id 2 chip_id 1 ext_bid_support 0
[ 30.199594] ath10k_pci 0000:01:00.0: boot upload otp to 0x1234 len 11240
[ 31.352144] ath10k_pci 0000:01:00.0: Init Max Stations to 512
[ 31.352176] ath10k_pci 0000:01:00.0: wmi event service ready min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000185b vht_cap 0x339b79b2 vht_supp_mcs 0x0000ffaa sw_ver0 0x01000000 sw_ver1 0x00000002 fw_build 0x00000000 phy_capab 0x00000002 num_rf_chains 0x00000004 eeprom_rd 0x00000000 low_2ghz_chan 2312 high_2ghz_chan 2732 low_5ghz_chan 4912 high_5ghz_chan 6100 num_mem_reqs 0x00000008 min_pkt_size_enable 0x00000000
[ 31.444406] ath10k_pci 0000:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr 14:91:82:7d:ef:7d status 0
[ 31.536607] ath10k_pci 0000:01:00.0: Init Channel Number 14
[ 31.566462] ath10k_pci 0000:01:00.0: set base mac addr 14:91:82:7d:ef:7f
[ 31.566826] ath10k_pci 0000:01:00.0: bdf failsafe status event received from fw: 0
[ 31.600473] br0: port 3(wlan0) entered blocking state
[ 31.600516] br0: port 3(wlan0) entered disabled state
[ 31.604723] device wlan0 entered promiscuous mode
[ 33.711195] ath10k_pci 0000:01:00.0: mac txpower 30
[ 33.713088] ath10k_pci 0000:01:00.0: mac txpower 30
[ 33.714923] br0: port 3(wlan0) entered blocking state
[ 33.719805] br0: port 3(wlan0) entered forwarding state
[ 33.749778] br1: port 2(wlan0.1) entered blocking state
[ 33.749800] br1: port 2(wlan0.1) entered disabled state
[ 33.754038] device wlan0.1 entered promiscuous mode
[ 33.761402] ath10k_pci 0000:01:00.0: mac txpower 30
[ 33.766773] br1: port 2(wlan0.1) entered blocking state
[ 33.793641] ath10k_pci 0000:01:00.0: mac txpower 30
[ 33.800186] ath10k_pci 0000:01:00.0: mac txpower 30
[ 33.895453] ath10k_pci 0000:01:00.0: Init Channel Number 14
[ 34.232377] ath10k_pci 0001:01:00.0: Init Channel Number 56
[ 34.232469] ath10k_pci 0000:01:00.0: Init Channel Number 14
[ 34.236969] ath10k_pci 0001:01:00.0: bdf failsafe status event received from fw: 1
[ 34.242525] ath10k_pci 0000:01:00.0: bdf failsafe status event received from fw: 1
[ 34.259817] ath: EEPROM regdomain: 0x8348
[ 34.259823] ath: EEPROM indicates we should expect a country code
[ 34.259828] ath: doing EEPROM country->regdmn map search
[ 34.259832] ath: country maps to regdmn code: 0x3a
[ 34.259836] ath: Country alpha2 being used: US
[ 34.259839] ath: Regpair used: 0x3a
[ 34.259843] ath: regdomain 0x8348 dynamically updated by user
[ 34.259853] ath10k_pci 0001:01:00.0: Init Channel Number 56
[ 34.259914] ath: EEPROM regdomain: 0x8348
[ 34.259917] ath: EEPROM indicates we should expect a country code
[ 34.259920] ath: doing EEPROM country->regdmn map search
[ 34.259949] ath: country maps to regdmn code: 0x3a
[ 34.259952] ath: Country alpha2 being used: US
[ 34.259955] ath: Regpair used: 0x3a
[ 34.259958] ath: regdomain 0x8348 dynamically updated by user
[ 34.259965] ath10k_pci 0000:01:00.0: Init Channel Number 14
[ 34.264317] ath10k_pci 0001:01:00.0: bdf failsafe status event received from fw: 0
[ 34.269081] ath10k_pci 0000:01:00.0: bdf failsafe status event received from fw: 0
[ 34.279560] ath10k_pci 0000:01:00.0: mac txpower 30
[ 34.284984] ath10k_pci 0000:01:00.0: mac txpower 30
[ 34.293966] ath10k_pci 0001:01:00.0: mac txpower 30
[ 34.294643] ath10k_pci 0001:01:00.0: mac txpower 30
[ 34.338793] ath10k_pci 0001:01:00.0: mac txpower 30
[ 34.338998] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 2
[ 34.342520] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 2
[ 34.354069] br1: port 1(wlan1.1) entered disabled state
[ 34.378126] device wlan1.1 left promiscuous mode
[ 34.378147] br1: port 1(wlan1.1) entered disabled state
[ 34.408705] ath10k_pci 0000:01:00.0: mac txpower 30
[ 34.408913] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 2
[ 34.412439] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 2
[ 34.423904] br1: port 2(wlan0.1) entered disabled state
[ 34.458230] device wlan0.1 left promiscuous mode
[ 34.458250] br1: port 2(wlan0.1) entered disabled state
[ 34.498203] device wlan1 left promiscuous mode
[ 34.498263] br0: port 2(wlan1) entered disabled state
[ 34.538250] device wlan0 left promiscuous mode
[ 34.538312] br0: port 3(wlan0) entered disabled state
[ 34.588965] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 1
[ 34.589196] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 1
[ 34.738799] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 1
[ 34.739027] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 1
[ 35.129899] ath10k_pci 0001:01:00.0: Init Channel Number 31
[ 35.487118] ath10k_pci 0001:01:00.0: boot get otp board id result 0x00008400 board_id 1 chip_id 1 ext_bid_support 0
[ 35.510819] ath10k_pci 0001:01:00.0: boot upload otp to 0x1234 len 11240
[ 36.659362] ath10k_pci 0001:01:00.0: Init Max Stations to 512
[ 36.659394] ath10k_pci 0001:01:00.0: wmi event service ready min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000185b vht_cap 0x339b79b2 vht_supp_mcs 0x0000ffaa sw_ver0 0x01000000 sw_ver1 0x00000002 fw_build 0x00000000 phy_capab 0x00000001 num_rf_chains 0x00000004 eeprom_rd 0x00000000 low_2ghz_chan 2312 high_2ghz_chan 2732 low_5ghz_chan 4912 high_5ghz_chan 6100 num_mem_reqs 0x00000008 min_pkt_size_enable 0x00000000
[ 36.750204] ath10k_pci 0001:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr 14:91:82:7d:ef:7d status 0
[ 36.866749] ath10k_pci 0001:01:00.0: Init Channel Number 31
[ 36.867496] ath10k_pci 0001:01:00.0: bdf failsafe status event received from fw: 0
[ 36.867508] ath10k_pci 0001:01:00.0: set base mac addr 14:91:82:7d:ef:80
[ 36.900144] br0: port 2(wlan1) entered blocking state
[ 36.900165] br0: port 2(wlan1) entered disabled state
[ 36.904359] device wlan1 entered promiscuous mode
[ 37.590270] ath10k_pci 0001:01:00.0: mac txpower 30
[ 37.592283] ath10k_pci 0001:01:00.0: mac txpower 30
[ 37.594884] br0: port 2(wlan1) entered blocking state
[ 37.598876] br0: port 2(wlan1) entered forwarding state
[ 37.645762] br1: port 1(wlan1.1) entered blocking state
[ 37.645783] br1: port 1(wlan1.1) entered disabled state
[ 37.650078] device wlan1.1 entered promiscuous mode
[ 37.663098] ath10k_pci 0001:01:00.0: mac txpower 30
[ 37.672815] br1: port 1(wlan1.1) entered blocking state
[ 37.699766] ath10k_pci 0001:01:00.0: mac txpower 30
[ 37.708955] ath10k_pci 0001:01:00.0: mac txpower 30
[ 37.796655] ath10k_pci 0001:01:00.0: Init Channel Number 31
[ 37.806419] ath10k_pci 0000:01:00.0: Init Channel Number 14
[ 38.167425] ath10k_pci 0000:01:00.0: boot get otp board id result 0x00008800 board_id 2 chip_id 1 ext_bid_support 0
[ 38.191243] ath10k_pci 0000:01:00.0: boot upload otp to 0x1234 len 11240
[ 39.343663] ath10k_pci 0000:01:00.0: Init Max Stations to 512
[ 39.343694] ath10k_pci 0000:01:00.0: wmi event service ready min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000185b vht_cap 0x339b79b2 vht_supp_mcs 0x0000ffaa sw_ver0 0x01000000 sw_ver1 0x00000002 fw_build 0x00000000 phy_capab 0x00000002 num_rf_chains 0x00000004 eeprom_rd 0x00000000 low_2ghz_chan 2312 high_2ghz_chan 2732 low_5ghz_chan 4912 high_5ghz_chan 6100 num_mem_reqs 0x00000008 min_pkt_size_enable 0x00000000
[ 39.436084] ath10k_pci 0000:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr 14:91:82:7d:ef:7d status 0
[ 39.558140] ath10k_pci 0000:01:00.0: Init Channel Number 14
[ 39.558291] ath10k_pci 0000:01:00.0: set base mac addr 14:91:82:7d:ef:7f
[ 39.558588] ath10k_pci 0000:01:00.0: bdf failsafe status event received from fw: 0
[ 39.603897] br0: port 3(wlan0) entered blocking state
[ 39.603917] br0: port 3(wlan0) entered disabled state
[ 39.608196] device wlan0 entered promiscuous mode
[ 41.721388] ath10k_pci 0000:01:00.0: mac txpower 30
[ 41.723278] ath10k_pci 0000:01:00.0: mac txpower 30
[ 41.725116] br0: port 3(wlan0) entered blocking state
[ 41.729991] br0: port 3(wlan0) entered forwarding state
[ 41.760264] br1: port 2(wlan0.1) entered blocking state
[ 41.760285] br1: port 2(wlan0.1) entered disabled state
[ 41.764481] device wlan0.1 entered promiscuous mode
[ 41.772725] ath10k_pci 0000:01:00.0: mac txpower 30
[ 41.777228] br1: port 2(wlan0.1) entered blocking state
[ 41.804850] ath10k_pci 0000:01:00.0: mac txpower 30
[ 41.807456] ath10k_pci 0000:01:00.0: mac txpower 30
[ 41.904201] ath10k_pci 0000:01:00.0: Init Channel Number 14
[ 42.239864] ath10k_pci 0001:01:00.0: Init Channel Number 31
[ 42.239953] ath10k_pci 0000:01:00.0: Init Channel Number 14
[ 42.243437] ath10k_pci 0001:01:00.0: bdf failsafe status event received from fw: 1
[ 42.250502] ath10k_pci 0000:01:00.0: bdf failsafe status event received from fw: 1
[ 42.265492] ath: EEPROM regdomain: 0x8348
[ 42.265499] ath: EEPROM indicates we should expect a country code
[ 42.265503] ath: doing EEPROM country->regdmn map search
[ 42.265507] ath: country maps to regdmn code: 0x3a
[ 42.265511] ath: Country alpha2 being used: US
[ 42.265515] ath: Regpair used: 0x3a
[ 42.265520] ath: regdomain 0x8348 dynamically updated by user
[ 42.265530] ath10k_pci 0001:01:00.0: Init Channel Number 34
[ 42.265586] ath: EEPROM regdomain: 0x8348
[ 42.265589] ath: EEPROM indicates we should expect a country code
[ 42.265593] ath: doing EEPROM country->regdmn map search
[ 42.265596] ath: country maps to regdmn code: 0x3a
[ 42.265599] ath: Country alpha2 being used: US
[ 42.265602] ath: Regpair used: 0x3a
[ 42.265605] ath: regdomain 0x8348 dynamically updated by user
[ 42.265612] ath10k_pci 0000:01:00.0: Init Channel Number 14
[ 42.270807] ath10k_pci 0001:01:00.0: bdf failsafe status event received from fw: 0
[ 42.278928] ath10k_pci 0000:01:00.0: bdf failsafe status event received from fw: 0
[ 42.287126] ath10k_pci 0000:01:00.0: mac txpower 30
[ 42.291371] ath10k_pci 0000:01:00.0: mac txpower 30
[ 42.299499] ath10k_pci 0001:01:00.0: mac txpower 30
[ 42.300845] ath10k_pci 0001:01:00.0: mac txpower 30
[ 42.636044] device eth0 entered promiscuous mode
[ 43.807795] Linux kernel CIFS/SMB SERVER 3.4.6 by Namjae Jeon <linkinjeon@kernel.org>
[ 44.217113] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 44.641414] IMQ: use 2 as queue number
[ 44.647860] IMQ driver loaded successfully. (numdevs = 16, numqueues = 2, imq_dev_accurate_stats = 1)
[ 44.647885] Hooking IMQ after NAT on PREROUTING.
[ 44.656152] Hooking IMQ before NAT on POSTROUTING.
[ 45.531114] xt_ndpi v1.2 ndpi 4.5.0-4005-b19e6392 IPv6=YES debug_message=no
[ 45.531114] BT: hash_size 0k, hash_expiation 0 sec, log_size 128kb
[ 45.531114] sizeof hash_ip4p_node=32 flow_struct=792 packet_struct=728
[ 45.531114] flow_tcp_struct=112 flow_udp_struct=84 int_one_line_struct=8
[ 45.531114] ndpi_ip_addr_t=16 ndpi_protocol=6 nf_ct_ext_ndpi=152
[ 45.531114] flow_info=112 spinlock_t=4 NF_EXT_ID 8
[ 45.545622] xt_ndpi: MAX_PROTOCOLS 512 LAST_PROTOCOL 333
[ 45.567875] xt_ndpi: flow acctounting OFF
[ 45.974981] dwmac1000: Master AXI performs any burst length
[ 45.975021] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 45.979514] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[ 45.988527] device eth0 left promiscuous mode
[ 46.195721] usbcore: registered new interface driver usbfs
[ 46.195822] usbcore: registered new interface driver hub
[ 46.200222] usbcore: registered new device driver usb
[ 46.247087] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 46.254864] ehci-platform: EHCI generic platform driver
[ 46.274651] ehci-pci: EHCI PCI platform driver
[ 46.357386] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 46.685063] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 46.685142] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 46.689661] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 46.697038] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
[ 46.706410] hub 1-0:1.0: USB hub found
[ 46.712058] hub 1-0:1.0: 1 port detected
[ 46.716185] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 46.719651] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 46.724963] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 46.733027] hub 2-0:1.0: USB hub found
[ 46.741103] hub 2-0:1.0: 1 port detected
[ 46.818991] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 46.819040] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 46.823533] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 46.831030] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
[ 46.840295] hub 3-0:1.0: USB hub found
[ 46.845980] hub 3-0:1.0: 1 port detected
[ 46.849908] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 46.853540] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 46.858981] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 46.867180] hub 4-0:1.0: USB hub found
[ 46.874869] hub 4-0:1.0: 1 port detected
[ 47.047925] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 47.288128] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 48.257964] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 50.108235] IMQ driver unloaded successfully.
[ 50.864834] tun: Universal TUN/TAP device driver, 1.6
[ 50.864857] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 51.917695] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 51.917732] usb usb4: USB disconnect, device number 1
[ 51.922781] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered
[ 51.930600] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 51.932555] usb usb3: USB disconnect, device number 1
[ 51.943351] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered
[ 51.944015] xhci-hcd xhci-hcd.0.auto: remove, state 1
[ 51.948308] usb usb2: USB disconnect, device number 1
[ 51.953183] usb 2-1: USB disconnect, device number 2
[ 51.968845] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
[ 51.969418] xhci-hcd xhci-hcd.0.auto: remove, state 1
[ 51.973585] usb usb1: USB disconnect, device number 1
[ 51.987348] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
[ 52.026733] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 52.026883] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 52.031360] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 52.031385] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
[ 52.032479] hub 1-0:1.0: USB hub found
[ 52.032942] hub 1-0:1.0: 1 port detected
[ 52.033243] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 52.033264] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 52.033761] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 52.034722] hub 2-0:1.0: USB hub found
[ 52.035169] hub 2-0:1.0: 1 port detected
[ 52.035539] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 52.035602] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 52.035759] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 52.035779] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
[ 52.037251] hub 3-0:1.0: USB hub found
[ 52.037692] hub 3-0:1.0: 1 port detected
[ 52.038063] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 52.038081] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 52.038609] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 52.039380] hub 4-0:1.0: USB hub found
[ 52.039775] hub 4-0:1.0: 1 port detected
[ 52.212570] SCSI subsystem initialized
[ 52.339088] usbcore: registered new interface driver usb-storage
[ 52.408195] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 52.421662] libata version 3.00 loaded.
[ 52.429956] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 52.438352] scsi host0: usb-storage 2-1:1.0
[ 52.509044] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
[ 52.509099] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 52.513445] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
[ 52.522714] scsi host1: ahci
[ 52.530576] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 95
[ 52.859444] ata1: SATA link down (SStatus 0 SControl 300)
[ 53.110414] sdhci: Secure Digital Host Controller Interface driver
[ 53.110440] sdhci: Copyright(c) Pierre Ossman
[ 53.124037] sdhci-pltfm: SDHCI platform and OF driver helper
[ 53.663144] br1: port 3(eth1.4) entered blocking state
[ 53.663165] br1: port 3(eth1.4) entered disabled state
[ 53.667454] device eth1.4 entered promiscuous mode
[ 53.674552] scsi 0:0:0:0: Direct-Access Samsung Flash Drive 1100 PQ: 0 ANSI: 6
[ 53.679432] sd 0:0:0:0: [sda] 62656641 512-byte logical blocks: (32.1 GB/29.9 GiB)
[ 53.683168] br1: port 3(eth1.4) entered blocking state
[ 53.693202] sd 0:0:0:0: [sda] Write Protect is off
[ 53.697920] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 53.698928] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 53.920958] sda: sda1
[ 53.922761] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 54.016635] IMQ: use 2 as queue number
[ 54.023679] IMQ driver loaded successfully. (numdevs = 16, numqueues = 2, imq_dev_accurate_stats = 1)
[ 54.023704] Hooking IMQ after NAT on PREROUTING.
[ 54.031949] Hooking IMQ before NAT on POSTROUTING.
[ 54.041926] ksmbd: kill command received
[ 54.850528] EXT4-fs (sda1): Ignoring removed nobh option
[ 54.853448] EXT4-fs (sda1): barriers disabled
[ 55.017915] EXT4-fs (sda1): recovery complete
[ 55.018704] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: init_itable=0,nobarrier,nobh,barrier=0
[ 55.685399] Linux kernel CIFS/SMB SERVER 3.4.6 by Namjae Jeon <linkinjeon@kernel.org>
[ 56.792970] br1: port 1(wlan1.1) entered learning state
[ 60.793628] br1: port 2(wlan0.1) entered learning state
[ 64.168326] IMQ driver unloaded successfully.
[ 66.412309] IMQ: use 2 as queue number
[ 66.423083] IMQ driver loaded successfully. (numdevs = 16, numqueues = 2, imq_dev_accurate_stats = 1)
[ 66.423108] Hooking IMQ after NAT on PREROUTING.
[ 66.431384] Hooking IMQ before NAT on POSTROUTING.
[ 71.793004] br1: port 1(wlan1.1) entered forwarding state
[ 72.793820] br1: port 3(eth1.4) entered learning state
[ 75.793394] br1: port 2(wlan0.1) entered forwarding state
[ 87.793378] br1: port 3(eth1.4) entered forwarding state
root@Citadel-Station-Homeworld:~# uptime && date
10:51:18 up 1 day, 1:42, load average: 0.00, 0.04, 0.06
Wed Mar 29 10:51:18 CDT 2023
root@Citadel-Station-Homeworld:~# ps
PID USER VSZ STAT COMMAND
1 root 1080 S /sbin/init
2 root 0 SW [kthreadd]
4 root 0 SW< [kworker/0:0H]
6 root 0 SW [ksoftirqd/0]
7 root 0 SW [rcu_sched]
8 root 0 SW [rcu_bh]
9 root 0 SW [migration/0]
10 root 0 SW< [lru-add-drain]
11 root 0 SW [cpuhp/0]
12 root 0 SW [cpuhp/1]
13 root 0 SW [migration/1]
14 root 0 SW [ksoftirqd/1]
16 root 0 SW< [kworker/1:0H]
17 root 0 SW [oom_reaper]
18 root 0 SW< [writeback]
19 root 0 SW [kcompactd0]
20 root 0 SW< [crypto]
21 root 0 SW< [bioset]
22 root 0 SW< [kblockd]
24 root 0 SW< [watchdogd]
43 root 0 SW [kswapd0]
44 root 0 SW< [vmstat]
71 root 0 SW< [cryptodev_queue]
75 root 0 SW< [bioset]
76 root 0 SW< [bioset]
77 root 0 SW< [bioset]
78 root 0 SW< [bioset]
79 root 0 SW< [bioset]
80 root 0 SW< [bioset]
81 root 0 SW< [bioset]
82 root 0 SW< [bioset]
83 root 0 SW< [bioset]
84 root 0 SW< [bioset]
85 root 0 SW< [bioset]
86 root 0 SW< [bioset]
87 root 0 SW< [bioset]
88 root 0 SW< [bioset]
89 root 0 SW< [bioset]
90 root 0 SW< [bioset]
91 root 0 SW< [bioset]
92 root 0 SW< [bioset]
93 root 0 SW< [bioset]
98 root 0 SW< [kworker/0:1H]
99 root 0 SW< [kworker/1:1H]
761 root 848 S /sbin/hotplug2 --set-rules-file /etc/hotplug2.rules --persistent
765 root 828 S /sbin/mstpd
816 root 0 SW< [cfg80211]
829 root 0 SW< [ath10k_wq]
830 root 0 SW< [ath10k_aux_wq]
831 root 0 SW< [ath10k_tx_compl]
836 root 0 SW< [ath10k_wq]
837 root 0 SW< [ath10k_aux_wq]
838 root 0 SW< [ath10k_tx_compl]
852 root 0 SW [kworker/0:2]
859 root 1820 S watchdog
1200 root 4728 S hostapd -B -P /var/run/wlan1_hostapd.pid /tmp/wlan1_hostap.conf
1258 root 4620 S hostapd -B -P /var/run/wlan0_hostapd.pid /tmp/wlan0_hostap.conf
1428 root 1428 S syslogd -Z -L
1430 root 1428 S klogd
1454 root 1272 S dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_ed25519_key -p 22 -s
2021 root 4848 S httpd -n -p 80
2023 root 1396 S resetbutton
2305 root 1784 S wland
2355 root 3460 S /tmp/openvpnserver --config /tmp/openvpn/openvpn.conf --daemon
2631 root 0 SW< [ata_sff]
2634 root 0 SW [scsi_eh_0]
2636 root 0 SW< [scsi_tmf_0]
2637 root 0 SW [usb-storage]
2643 root 0 SW [scsi_eh_1]
2644 root 0 SW< [scsi_tmf_1]
2782 root 0 SW< [bioset]
3167 root 0 SW [jbd2/sda1-8]
3170 root 0 SW< [ext4-rsv-conver]
3331 root 768 S wsdd2 -d -N Citadel-Station-Homeworld -G WORKGROUP -b vendor:dd-wrt,model:Linksys EA8500,sku:52189
3335 root 884 S ksmbd.mountd -c /tmp/smb.conf -u /tmp/smb.db
3337 root 1048 S ksmbd.mountd -c /tmp/smb.conf -u /tmp/smb.db
3340 root 0 SW [ksmbd-lo]
3342 root 0 SW [ksmbd-eth0]
3345 root 0 SW [ksmbd-br0]
3348 root 0 SW [ksmbd-br1]
3351 root 0 SW [ksmbd-tun2]
3374 root 768 S wsdd2 -d -N Citadel-Station-Homeworld -G WORKGROUP -b vendor:dd-wrt,model:Linksys EA8500,sku:52189
3809 root 1428 S udhcpc -i eth0 -p /var/run/udhcpc.pid -s /tmp/dhcpc -O routes -O msstaticroutes -O staticroutes
3855 root 2124 S dnsmasq -u root -g root -C /tmp/dnsmasq.conf
4523 root 0 SW [ksmbd-imq0]
4653 root 740 S cron
4657 root 1816 S process_monitor
6214 root 0 SW [kworker/1:2]
6215 root 0 SW [kworker/0:0]
6850 root 0 SW [kworker/1:0]
11510 root 0 SW< [kworker/u5:1]
11820 root 0 SW< [kworker/u5:2]
11821 root 0 SW< [kworker/u5:4]
11822 root 0 SW [kworker/u4:1]
11847 root 0 SW [kworker/u4:2]
11872 root 0 RW [kworker/u4:0]
11873 root 1292 R dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_ed25519_key -p 22 -s
11874 root 1432 S -sh
11879 root 1436 R ps
root@Citadel-Station-Homeworld:~#
Connection to citadel-station-homeworld.mrjcd.com closed.
mrjcd@DebLynn:~$