mrjcd@Deb:~$ ssh root@ea8500.mrjcd.com
DD-WRT v3.0-r48029 std (c) 2022 NewMedia-NET GmbH
Release: 01/08/22
Board: Linksys EA8500
==========================================================
___ ___ _ _____ ______ ____ ___
/ _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \
/ // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // /
/____/____/ |__/|__/_/|_| /_/ |___/____(_)___/
DD-WRT v3.0
https://www.dd-wrt.com
==========================================================
BusyBox v1.35.0 (2022-01-08 01:43:45 +07) built-in shell (ash)
root@EA8500:~# ps
PID USER VSZ STAT COMMAND
1 root 1040 S /sbin/init
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
4 root 0 SW [kworker/0:0]
5 root 0 SW< [kworker/0:0H]
6 root 0 RW [kworker/u4:0]
7 root 0 SW [rcu_sched]
8 root 0 SW [rcu_bh]
9 root 0 SW [migration/0]
10 root 0 SW< [lru-add-drain]
11 root 0 SW [cpuhp/0]
12 root 0 SW [cpuhp/1]
13 root 0 SW [migration/1]
14 root 0 SW [ksoftirqd/1]
15 root 0 SW [kworker/1:0]
16 root 0 SW< [kworker/1:0H]
17 root 0 SW [oom_reaper]
18 root 0 SW< [writeback]
19 root 0 SW [kcompactd0]
20 root 0 SW< [crypto]
21 root 0 SW< [bioset]
22 root 0 SW< [kblockd]
23 root 0 RW< [kworker/u5:0]
24 root 0 SW< [watchdogd]
26 root 0 SW [kworker/0:1]
43 root 0 SW [kswapd0]
44 root 0 SW< [vmstat]
70 root 0 SW< [cryptodev_queue]
71 root 0 SW [kworker/1:1]
72 root 0 SW [kworker/u4:1]
74 root 0 SW< [bioset]
75 root 0 SW< [bioset]
76 root 0 SW< [bioset]
77 root 0 SW< [bioset]
78 root 0 SW< [bioset]
79 root 0 SW< [bioset]
80 root 0 SW< [bioset]
81 root 0 SW< [bioset]
82 root 0 SW< [bioset]
83 root 0 SW< [bioset]
84 root 0 SW< [bioset]
85 root 0 SW< [bioset]
86 root 0 SW< [bioset]
87 root 0 SW< [bioset]
88 root 0 SW< [bioset]
89 root 0 SW< [bioset]
90 root 0 SW< [bioset]
91 root 0 SW< [bioset]
92 root 0 SW< [bioset]
97 root 0 SW< [kworker/0:1H]
98 root 0 SW< [kworker/1:1H]
760 root 732 S /sbin/hotplug2 --set-rules-file /etc/hotplug2.rules --persistent
764 root 780 S /sbin/mstpd
772 root 952 S irqbalance -t 10
806 root 0 SW< [cfg80211]
807 root 0 SW [kworker/0:2]
818 root 0 SW< [ath10k_wq]
819 root 0 SW< [ath10k_aux_wq]
820 root 0 SW< [ath10k_tx_compl]
821 root 0 SW< [kworker/u5:1]
822 root 0 SW [kworker/u4:2]
823 root 0 SW< [kworker/u5:2]
825 root 0 SW< [ath10k_wq]
826 root 0 SW< [ath10k_aux_wq]
827 root 0 SW< [ath10k_tx_compl]
841 root 0 SW [kworker/1:2]
858 root 1776 S watchdog
1093 root 1380 S syslogd -Z -L
1099 root 1380 S klogd
1113 root 1176 S dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_rsa_key -p 22 -s
1169 root 3368 S /tmp/openvpnserver --config /tmp/openvpn/openvpn.conf --daemon
1374 root 1740 S wland
1590 root 4820 S httpd -n -p 80
1592 root 1436 S resetbutton
1730 root 0 SW [kworker/0:3]
1833 root 0 SW [kworker/1:3]
2018 root 1776 S process_monitor
2062 root 0 SW< [ata_sff]
2067 root 0 SW [scsi_eh_0]
2068 root 0 SW< [scsi_tmf_0]
2070 root 0 SW [scsi_eh_1]
2071 root 0 SW< [scsi_tmf_1]
2073 root 0 SW [usb-storage]
2075 root 0 SW [scsi_eh_2]
2076 root 0 SW< [scsi_tmf_2]
2079 root 0 SW [usb-storage]
2154 root 0 SW< [bioset]
2155 root 0 SW< [bioset]
2263 root 0 SW [jbd2/sda1-8]
2264 root 0 SW< [ext4-rsv-conver]
2305 root 0 SW [jbd2/sdb1-8]
2307 root 0 SW< [ext4-rsv-conver]
2349 root 708 S cron
2523 root 728 S wsdd2 -d -N EA8500 -G WORKGROUP -b vendor:dd-wrt,model:Linksys EA8500,sku:48029
2529 root 836 S ksmbd.mountd -c /tmp/smb.conf -u /tmp/smb.db
2531 root 868 S ksmbd.mountd -c /tmp/smb.conf -u /tmp/smb.db
2537 root 0 SW [ksmbd-lo]
2543 root 0 SW [ksmbd-eth0]
2547 root 0 SW [ksmbd-br0]
2551 root 0 SW [ksmbd-tun2]
2563 root 728 S wsdd2 -d -N EA8500 -G WORKGROUP -b vendor:dd-wrt,model:Linksys EA8500,sku:48029
2591 root 728 S wsdd2 -d -N EA8500 -G WORKGROUP -b vendor:dd-wrt,model:Linksys EA8500,sku:48029
2608 root 728 S wsdd2 -d -N EA8500 -G WORKGROUP -b vendor:dd-wrt,model:Linksys EA8500,sku:48029
2701 root 1232 R dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_rsa_key -p 22 -s
2702 root 1380 S -sh
2704 root 1380 R ps
root@EA8500:~# cat /tmp/smb.conf
[global]
log level = 1
netbios name = EA8500
server string =
syslog = 10
encrypt passwords = true
preferred master = yes
use sendfile = yes
aio read size = 2048
aio write size = 2048
large readwrite = yes
security = user
oplocks = yes
mangled names = no
max stat cache size = 64
workgroup =
bind interfaces only = yes
guest account = nobody
map to guest = never
smb passwd file = /var/samba/smbpasswd
private dir = /var/samba
passdb backend = smbpasswd
log file = /var/smbd.log
max log size = 1000
socket options = TCP_NODELAY IPTOS_LOWDELAY SO_SNDBUF=262144 SO_RCVBUF=262144
read raw = yes
write raw = yes
max xmit = 65536
dead time = 15
getwd cache = yes
lpq cache time = 30
server min protocol = SMB2_10
server max protocol = SMB3_11
printing = none
load printers = No
usershare allow guests = Yes
smb3 encryption = yes
[32GBext4]
comment = 32GBext4
path = /mnt/sda1
read only = no
guest ok = no
valid users = mrjcd
force user = root
[16GBext4]
comment = 16GBext4
path = /mnt/sdb1
read only = no
guest ok = no
valid users = mrjcd
force user = root
root@EA8500:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.296 (root@server2) (gcc version 10.0.1 (OpenWrt GCC 10.0.1 r12423-0493d57e04) ) #646 SMP Fri Jan 7 15:43:45 +07 2022
[ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt:Machine model: Linksys EA8500 WiFi Router
[ 0.000000] OF: fdt:Ignoring memory range 0x41500000 - 0x42000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 122880
[ 0.000000] free_area_init_node: node 0, pgdat c0c2da40, node_mem_map ddc39000
[ 0.000000] Normal zone: 960 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 122880 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 12 pages/cpu s19020 r8192 d21940 u49152
[ 0.000000] pcpu-alloc: s19020 r8192 d21940 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920
[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:14
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 477252K/491520K available (6144K kernel code, 186K rwdata, 1024K rodata, 1024K init, 363K bss, 14268K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xde800000 - 0xff800000 ( 528 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc0900000 (7136 kB)
[ 0.000000] .init : 0xc0b00000 - 0xc0c00000 (1024 kB)
[ 0.000000] .data : 0xc0c00000 - 0xc0c2e878 ( 187 kB)
[ 0.000000] .bss : 0xc0c30000 - 0xc0c8ae04 ( 364 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[ 0.000007] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[ 0.000020] Switching to timer-based delay loop, resolution 160ns
[ 0.000184] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[ 0.000204] pid_max: default: 32768 minimum: 301
[ 0.000317] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000330] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000929] CPU: Testing write buffer coherency: ok
[ 0.001212] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001263] Setting up static identity map for 0x42300000 - 0x4230003c
[ 0.004281] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.004451] Brought up 2 CPUs
[ 0.004472] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[ 0.004483] CPU: All CPU(s) started in SVC mode.
[ 0.016812] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[ 0.017008] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.017033] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.017098] pinctrl core: initialized pinctrl subsystem
[ 0.018211] NET: Registered protocol family 16
[ 0.018544] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.041431] cpuidle: using governor ladder
[ 0.104665] msm_bus_fabric_init_driver
[ 0.105882] pps_core: LinuxPPS API ver. 1 registered
[ 0.105898] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.105940] PTP clock support registered
[ 0.108061] clocksource: Switched to clocksource dg_timer
[ 0.112036] NET: Registered protocol family 2
[ 0.112204] IP idents hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.112960] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.112998] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.113053] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.113108] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.113134] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.113296] NET: Registered protocol family 1
[ 0.113346] PCI: CLS 0 bytes, default 64
[ 0.117235] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.126683] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.132978] cryptodev: driver 1.9 loaded.
[ 0.133011] io scheduler noop registered
[ 0.133025] io scheduler deadline registered (default)
[ 0.134747] 1b500000.pci supply vdda not found, using dummy regulator
[ 0.134844] 1b500000.pci supply vdda_phy not found, using dummy regulator
[ 0.134929] 1b500000.pci supply vdda_refclk not found, using dummy regulator
[ 0.135659] OF: PCI: host bridge /soc/pci@1b500000 ranges:
[ 0.135702] OF: PCI: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[ 0.135729] OF: PCI: MEM 0x08000000..0x0fdfffff -> 0x08000000
[ 0.238453] qcom-pcie 1b500000.pci: link up
[ 0.238636] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[ 0.238658] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.238675] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
[ 0.238689] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[ 0.238741] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.238896] pci 0000:00:00.0: supports D1
[ 0.238906] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.239205] PCI: bus0: Fast back to back transfers disabled
[ 0.239528] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.239774] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.240931] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.241514] PCI: bus1: Fast back to back transfers disabled
[ 0.241803] pci 0000:00:00.0: BAR 14: assigned [mem 0x08000000-0x081fffff]
[ 0.241827] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[ 0.241964] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.241984] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
[ 0.242404] aer 0000:00:00.0:pcie002: service driver aer loaded
[ 0.242843] 1b700000.pci supply vdda not found, using dummy regulator
[ 0.242953] 1b700000.pci supply vdda_phy not found, using dummy regulator
[ 0.243042] 1b700000.pci supply vdda_refclk not found, using dummy regulator
[ 0.243752] OF: PCI: host bridge /soc/pci@1b700000 ranges:
[ 0.243787] OF: PCI: IO 0x31e00000..0x31efffff -> 0x31e00000
[ 0.243809] OF: PCI: MEM 0x2e000000..0x31dfffff -> 0x2e000000
[ 0.348449] qcom-pcie 1b700000.pci: link up
[ 0.348627] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[ 0.348644] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.348658] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[ 0.348703] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.348825] pci 0001:00:00.0: supports D1
[ 0.348835] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[ 0.349094] PCI: bus0: Fast back to back transfers disabled
[ 0.349395] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.349620] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.350689] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.351248] PCI: bus1: Fast back to back transfers disabled
[ 0.351617] pci 0001:00:00.0: BAR 14: assigned [mem 0x2e000000-0x2e1fffff]
[ 0.351640] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[ 0.351763] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 0.351781] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
[ 0.352162] aer 0001:00:00.0:pcie002: service driver aer loaded
[ 0.352607] 1b900000.pci supply vdda not found, using dummy regulator
[ 0.352704] 1b900000.pci supply vdda_phy not found, using dummy regulator
[ 0.352785] 1b900000.pci supply vdda_refclk not found, using dummy regulator
[ 0.353527] OF: PCI: host bridge /soc/pci@1b900000 ranges:
[ 0.353561] OF: PCI: IO 0x35e00000..0x35efffff -> 0x35e00000
[ 0.353584] OF: PCI: MEM 0x32000000..0x35dfffff -> 0x32000000
[ 1.358437] qcom-pcie 1b900000.pci: phy link never came up
[ 1.360284] qcom-pcie 1b900000.pci: hostinit failed
[ 1.361007] deviceless supply s1b not found, using dummy regulator
[ 1.362562] L2 @ QSB rate. Forcing new rate.
[ 1.362737] L2 @ 800000 KHz
[ 1.362845] CPU0 @ 800000 KHz
[ 1.362855] CPU1 @ QSB rate. Forcing new rate.
[ 1.362978] CPU1 @ 800000 KHz
[ 1.365048] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[ 1.366720] serial8250_init
[ 1.366732] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 1.367732] msm_serial 16340000.serial: msm_serial: detected port #0
[ 1.367803] msm_serial 16340000.serial: uartclk = 7372800
[ 1.367864] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 201, base_baud = 460800) is a MSM
[ 1.367896] msm_serial: console setup on port #0
[ 2.114688] console [ttyMSM0] enabled
[ 2.119439] msm_serial: driver initialized
[ 2.124573] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
[ 2.126766] nand: AMD/Spansion S34MS01G2
[ 2.133358] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 2.137590] 19 ofpart partitions found on MTD device qcom_nand.0
[ 2.144641] Creating 19 MTD partitions on "qcom_nand.0":
[ 2.150793] 0x000000000000-0x000000040000 : "SBL1"
[ 2.157216] 0x000000040000-0x000000180000 : "MIBIB"
[ 2.163236] 0x000000180000-0x0000002c0000 : "SBL2"
[ 2.167983] 0x0000002c0000-0x000000540000 : "SBL3"
[ 2.170907] random: fast init done
[ 2.178803] 0x000000540000-0x000000660000 : "DDRCONFIG"
[ 2.181130] 0x000000660000-0x000000780000 : "SSD"
[ 2.185904] 0x000000780000-0x000000a00000 : "TZ"
[ 2.192704] 0x000000a00000-0x000000c80000 : "RPM"
[ 2.197324] 0x000000c80000-0x000000dc0000 : "art"
[ 2.200210] 0x000000dc0000-0x000000ec0000 : "APPSBL"
[ 2.204552] 0x000000ec0000-0x000000f00000 : "u_env"
[ 2.208566] 0x000000f00000-0x000000f40000 : "s_env"
[ 2.213088] 0x000000f40000-0x000000f80000 : "devinfo"
[ 2.217997] 0x000000f80000-0x000003780000 : "linux"
[ 2.275744] 0x000001280000-0x000003780000 : "rootfs"
[ 2.325855] mtd: partition "rootfs" set to be root filesystem
[ 2.325886] 0x000003780000-0x000005f40000 : "linux2"
[ 2.384408] 0x000003a80000-0x000005f40000 : "rootfs2"
[ 2.434030] 0x000005f40000-0x000005f80000 : "nvram"
[ 2.435203] 0x000005f80000-0x000008000000 : "ddwrt"
[ 2.459291] random: crng init done
[ 2.482683] libphy: GPIO Bitbanged MDIO: probed
[ 2.485876] libphy: Fixed MDIO Bus: probed
[ 2.507064] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
[ 3.357787] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 3.357814] Ring mode enabled
[ 3.361874] DMA HW capability register supported
[ 3.364765] Enhanced/Alternate descriptors
[ 3.370404] Enabled extended descriptors
[ 3.373364] RX Checksum Offload Engine supported
[ 3.377530] COE Type 2
[ 3.382266] TX Checksum insertion supported
[ 3.384474] Wake-Up On Lan supported
[ 3.389051] eth%d: device MAC address 00:06:3b:01:41:00
[ 3.392550] Enable RX Mitigation via HW Watchdog Timer
[ 3.398874] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 3.402792] Ring mode enabled
[ 3.407996] DMA HW capability register supported
[ 3.411011] Enhanced/Alternate descriptors
[ 3.416591] Enabled extended descriptors
[ 3.419634] RX Checksum Offload Engine supported
[ 3.423718] COE Type 2
[ 3.428468] TX Checksum insertion supported
[ 3.430660] Wake-Up On Lan supported
[ 3.435177] eth%d: device MAC address 00:03:7f:ba:db:02
[ 3.438809] Enable RX Mitigation via HW Watchdog Timer
[ 3.444567] i2c /dev entries driver
[ 3.449657] Calibration not found.
[ 3.453552] CPUidle arm: CPU 0 failed to init idle CPU ops
[ 3.456400] GACT probability NOT on
[ 3.461484] Mirror/redirect action on
[ 3.464802] Simple TC action Loaded
[ 3.469274] netem: version 1.3
[ 3.471919] u32 classifier
[ 3.475015] Performance counters on
[ 3.477708] input device check on
[ 3.481515] Actions configured
[ 3.485270] Netfilter messages via NETLINK v0.30.
[ 3.488891] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 3.493918] nf_conntrack_rtsp v0.7 loading
[ 3.499685] xt_time: kernel timezone is -0000
[ 3.503326] ip_set: protocol 6
[ 3.507936] gre: GRE over IPv4 demultiplexor driver
[ 3.511198] nf_nat_rtsp v0.7 loading
[ 3.515492] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.519530] NET: Registered protocol family 17
[ 3.524653] Bridge firewalling registered
[ 3.528914] 8021q: 802.1Q VLAN Support v1.8
[ 3.533040] Registering SWP/SWPB emulation handler
[ 3.537224] registered taskstats version 1
[ 3.551010] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
[ 3.569474] s1a: Bringing 0uV into 1050000-1050000uV
[ 3.569740] s1b: Bringing 0uV into 1050000-1050000uV
[ 3.573707] s2a: Bringing 0uV into 800000-800000uV
[ 3.578768] s2b: Bringing 0uV into 800000-800000uV
[ 3.586842] trying to register driver cpufreq-dt
[ 3.589411] searching for nvram
[ 3.592697] nvram size = 262144
[ 3.681038] found nvram at 20000
[ 3.726124] no valid UBI magic found inside mtd13
[ 3.726179] hctosys: unable to open rtc device (rtc0)
[ 3.738664] VFS: Mounted root (squashfs filesystem) readonly on device 31:14.
[ 3.739578] Freeing unused kernel memory: 1024K
[ 7.335695] Loading modules backported from Linux version v5.10-rc6-0-gb65054597872
[ 7.335726] Backport generated by backports.git v5.10-rc6-1-0-g3a9d70a3
[ 7.808450] ath9k: ath9k: Driver unloaded
[ 8.129988] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 8.130674] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 8.334153] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[ 8.636604] ath10k_pci 0000:01:00.0: found firmware features ie (8 B)
[ 8.636646] ath10k_pci 0000:01:00.0: Unknown FW IE: 30
[ 8.642139] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
[ 8.647072] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[ 8.659865] ath10k_pci 0000:01:00.0: firmware ver 10.4-ddwrt-9980-tW-13-6369M api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate crc32 13885e7d
[ 8.716693] ath10k_pci 0000:01:00.0: boot get otp board id result 0x00008800 board_id 2 chip_id 1 ext_bid_support 0
[ 8.716737] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=2'
[ 8.726006] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=2'
[ 8.758870] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:2 crc32 792a3d38
[ 8.780170] ath10k_pci 0000:01:00.0: boot already acquired valid otp board id,skip download, board_id 2 chip_id 1
[ 8.800724] ath10k_pci 0000:01:00.0: boot upload otp to 0x1234 len 9477
[ 9.857127] ath10k_pci 0000:01:00.0: Init Max Stations to 64
[ 9.929634] ath10k_pci 0000:01:00.0: wmi debug print truncated: 128
[ 9.929673] ath10k_pci 0000:01:00.0: ChipType 1200 ChipTypeID 0 BoardID 1 P 80/80 V 16 K 160 PH 272 T 282 msdu-desc: 2500 sw-crypt: 0 c
[ 9.934813] ath10k_pci 0000:01:00.0: free: 24772 iram: 33152 sram: 18196
[ 9.947308] ath10k_pci 0000:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr c0:56:27:08:b2:92 status 0
[ 9.985420] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 64 raw 0 hwcrypto 1
[ 10.098466] ath: EEPROM regdomain sanitized
[ 10.098478] ath: EEPROM regdomain: 0x64
[ 10.098486] ath: EEPROM indicates we should expect a direct regpair map
[ 10.098503] ath: Country alpha2 being used: 00
[ 10.098509] ath: Regpair used: 0x64
[ 10.098579] initialize fq_codel with 33554432 bytes memory limit
[ 10.098755] ieee80211_txq_setup_flows: set limit to 4194304 bytes
[ 10.108973] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[ 10.110280] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 10.289757] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[ 10.289822] ath10k_pci 0001:01:00.0: found firmware features ie (8 B)
[ 10.299465] ath10k_pci 0001:01:00.0: Unknown FW IE: 30
[ 10.305875] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
[ 10.310985] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[ 10.324161] ath10k_pci 0001:01:00.0: firmware ver 10.4-ddwrt-9980-tW-13-6369M api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate crc32 13885e7d
[ 10.380456] ath10k_pci 0001:01:00.0: boot get otp board id result 0x00008400 board_id 1 chip_id 1 ext_bid_support 0
[ 10.380501] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=1'
[ 10.389785] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=1'
[ 10.399675] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:1 crc32 792a3d38
[ 10.428535] ath10k_pci 0001:01:00.0: boot already acquired valid otp board id,skip download, board_id 1 chip_id 1
[ 10.448996] ath10k_pci 0001:01:00.0: boot upload otp to 0x1234 len 9477
[ 11.501831] ath10k_pci 0001:01:00.0: Init Max Stations to 64
[ 11.572202] ath10k_pci 0001:01:00.0: wmi debug print truncated: 128
[ 11.572227] ath10k_pci 0001:01:00.0: ChipType 1200 ChipTypeID 0 BoardID 2 P 80/80 V 16 K 160 PH 272 T 282 msdu-desc: 2500 sw-crypt: 0 c
[ 11.577351] ath10k_pci 0001:01:00.0: free: 24772 iram: 33152 sram: 18196
[ 11.589833] ath10k_pci 0001:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr c0:56:27:08:b2:92 status 0
[ 11.626468] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 64 raw 0 hwcrypto 1
[ 11.723894] ath: EEPROM regdomain sanitized
[ 11.723904] ath: EEPROM regdomain: 0x64
[ 11.723910] ath: EEPROM indicates we should expect a direct regpair map
[ 11.723923] ath: Country alpha2 being used: 00
[ 11.723927] ath: Regpair used: 0x64
[ 11.723984] initialize fq_codel with 33554432 bytes memory limit
[ 11.724102] ieee80211_txq_setup_flows: set limit to 33554432 bytes
[ 12.832462] dwmac1000: Master AXI performs any burst length
[ 12.832526] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 12.837100] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[ 12.941425] dwmac1000: Master AXI performs any burst length
[ 12.941465] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 12.945918] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 13.848463] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 14.895827] device br0 entered promiscuous mode
[ 14.950801] br0: port 1(vlan1) entered blocking state
[ 14.953441] br0: port 1(vlan1) entered disabled state
[ 14.958720] device vlan1 entered promiscuous mode
[ 14.963507] device eth0 entered promiscuous mode
[ 14.968250] br0: port 1(vlan1) entered blocking state
[ 14.972964] br0: port 1(vlan1) entered forwarding state
[ 15.006267] br0: port 2(vlan2) entered blocking state
[ 15.009042] br0: port 2(vlan2) entered disabled state
[ 15.014194] device vlan2 entered promiscuous mode
[ 15.019139] br0: port 2(vlan2) entered blocking state
[ 15.023721] br0: port 2(vlan2) entered forwarding state
[ 15.034495] device br0 left promiscuous mode
[ 15.037942] device br0 entered promiscuous mode
[ 15.045363] device br0 left promiscuous mode
[ 15.145538] ath: EEPROM regdomain: 0x8348
[ 15.145544] ath: EEPROM indicates we should expect a country code
[ 15.145549] ath: doing EEPROM country->regdmn map search
[ 15.145554] ath: country maps to regdmn code: 0x3a
[ 15.145558] ath: Country alpha2 being used: US
[ 15.145561] ath: Regpair used: 0x3a
[ 15.145565] ath: regdomain 0x8348 dynamically updated by user
[ 15.145581] ath: EEPROM regdomain: 0x8348
[ 15.145584] ath: EEPROM indicates we should expect a country code
[ 15.145588] ath: doing EEPROM country->regdmn map search
[ 15.145591] ath: country maps to regdmn code: 0x3a
[ 15.145594] ath: Country alpha2 being used: US
[ 15.145597] ath: Regpair used: 0x3a
[ 15.145600] ath: regdomain 0x8348 dynamically updated by user
[ 15.566798] tun: Universal TUN/TAP device driver, 1.6
[ 15.571460] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 16.725792] Linux kernel CIFS/SMB SERVER 3.4.3 by Namjae Jeon <linkinjeon@kernel.org>
[ 16.838926] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 18.505336] usbcore: registered new interface driver usbfs
[ 18.505427] usbcore: registered new interface driver hub
[ 18.509828] usbcore: registered new device driver usb
[ 18.562064] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 18.569809] ehci-platform: EHCI generic platform driver
[ 18.588521] ehci-pci: EHCI PCI platform driver
[ 18.667930] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 19.019189] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 19.019539] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 19.025071] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 19.032547] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
[ 19.033618] hub 1-0:1.0: USB hub found
[ 19.033916] hub 1-0:1.0: 1 port detected
[ 19.034196] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 19.034217] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 19.034676] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 19.035630] hub 2-0:1.0: USB hub found
[ 19.036031] hub 2-0:1.0: 1 port detected
[ 19.113023] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 19.113077] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 19.117541] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 19.125088] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
[ 19.134882] hub 3-0:1.0: USB hub found
[ 19.143579] hub 3-0:1.0: 1 port detected
[ 19.147545] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 19.151189] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 19.151300] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 19.151786] hub 4-0:1.0: USB hub found
[ 19.151819] hub 4-0:1.0: 1 port detected
[ 19.418232] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 19.618223] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 20.598312] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 24.234583] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 24.234620] usb usb4: USB disconnect, device number 1
[ 24.239804] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered
[ 24.244111] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 24.249463] usb usb3: USB disconnect, device number 1
[ 24.254321] usb 3-1: USB disconnect, device number 2
[ 24.261671] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered
[ 24.264940] xhci-hcd xhci-hcd.0.auto: remove, state 1
[ 24.270143] usb usb2: USB disconnect, device number 1
[ 24.274984] usb 2-1: USB disconnect, device number 2
[ 24.282768] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
[ 24.285527] xhci-hcd xhci-hcd.0.auto: remove, state 1
[ 24.290791] usb usb1: USB disconnect, device number 1
[ 24.300620] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
[ 24.336280] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 24.336363] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 24.340884] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 24.348225] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
[ 24.357511] hub 1-0:1.0: USB hub found
[ 24.363408] hub 1-0:1.0: 1 port detected
[ 24.367014] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 24.370904] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 24.376171] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 24.384229] hub 2-0:1.0: USB hub found
[ 24.392271] hub 2-0:1.0: 1 port detected
[ 24.395979] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 24.399705] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 24.405091] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 24.412534] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
[ 24.421810] hub 3-0:1.0: USB hub found
[ 24.427478] hub 3-0:1.0: 1 port detected
[ 24.431483] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 24.435038] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 24.440457] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 24.448456] hub 4-0:1.0: USB hub found
[ 24.456234] hub 4-0:1.0: 1 port detected
[ 24.508477] SCSI subsystem initialized
[ 24.607998] usbcore: registered new interface driver usb-storage
[ 24.665442] libata version 3.00 loaded.
[ 24.718496] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 24.724780] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
[ 24.724832] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 24.729481] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
[ 24.738873] scsi host0: ahci
[ 24.746407] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 95
[ 24.749763] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 24.794570] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 24.794730] usb-storage 2-1:1.0: Quirks match for vid 090c pid 1000: 400
[ 24.799998] scsi host1: usb-storage 2-1:1.0
[ 24.889257] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 24.893218] scsi host2: usb-storage 3-1:1.0
[ 25.089770] ata1: SATA link down (SStatus 0 SControl 300)
[ 25.265763] sdhci: Secure Digital Host Controller Interface driver
[ 25.265789] sdhci: Copyright(c) Pierre Ossman
[ 25.278662] sdhci-pltfm: SDHCI platform and OF driver helper
[ 25.929512] scsi 2:0:0:0: Direct-Access USB Flash Drive 1.00 PQ: 0 ANSI: 6
[ 26.070840] scsi 1:0:0:0: Direct-Access Samsung Flash Drive 1100 PQ: 0 ANSI: 6
[ 26.073156] sd 1:0:0:0: [sda] 62656641 512-byte logical blocks: (32.1 GB/29.9 GiB)
[ 26.075488] sd 2:0:0:0: [sdb] 30629376 512-byte logical blocks: (15.7 GB/14.6 GiB)
[ 26.076668] sd 2:0:0:0: [sdb] Write Protect is off
[ 26.076680] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 26.077042] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 26.082717] sdb: sdb1
[ 26.089248] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 26.119535] sd 1:0:0:0: [sda] Write Protect is off
[ 26.119569] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 26.119952] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 26.127809] sda: sda1
[ 26.135846] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 26.360083] ksmbd: kill command received
[ 27.022840] EXT4-fs (sda1): Ignoring removed nobh option
[ 27.025137] EXT4-fs (sda1): barriers disabled
[ 27.030863] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: init_itable=0,nobarrier,nobh,barrier=0
[ 27.159888] EXT4-fs (sdb1): Ignoring removed nobh option
[ 27.168720] EXT4-fs (sdb1): barriers disabled
[ 27.192641] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: init_itable=0,nobarrier,nobh,barrier=0
[ 28.075213] Linux kernel CIFS/SMB SERVER 3.4.3 by Namjae Jeon <linkinjeon@kernel.org>
root@EA8500:~# cat /tmp/var/log/messages
Dec 31 18:00:14 EA8500 syslog.info syslogd started: BusyBox v1.35.0
Dec 31 18:00:14 EA8500 user.info : [syslogd] : daemon successfully started
Dec 31 18:00:14 EA8500 user.info : [klogd] : daemon successfully started
Dec 31 18:00:14 EA8500 kern.notice kernel: klogd started: BusyBox v1.35.0 (2022-01-08 01:43:45 +07)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Booting Linux on physical CPU 0x0
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] Linux version 4.9.296 (root@server2) (gcc version 10.0.1 (OpenWrt GCC 10.0.1 r12423-0493d57e04) ) #646 SMP Fri Jan 7 15:43:45 +07 2022
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] CPU: div instructions available: patching division code
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] OF: fdt:Machine model: Linksys EA8500 WiFi Router
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.000000] OF: fdt:Ignoring memory range 0x41500000 - 0x42000000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Memory policy: Data cache writealloc
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] On node 0 totalpages: 122880
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat c0c2da40, node_mem_map ddc39000
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] Normal zone: 960 pages used for memmap
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] Normal zone: 122880 pages, LIFO batch:31
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] percpu: Embedded 12 pages/cpu s19020 r8192 d21940 u49152
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] pcpu-alloc: s19020 r8192 d21940 u49152 alloc=12*4096
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:14
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Memory: 477252K/491520K available (6144K kernel code, 186K rwdata, 1024K rodata, 1024K init, 363K bss, 14268K reserved, 0K cma-reserved, 0K highmem)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] Virtual kernel memory layout:
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] vmalloc : 0xde800000 - 0xff800000 ( 528 MB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] .text : 0xc0208000 - 0xc0900000 (7136 kB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] .init : 0xc0b00000 - 0xc0c00000 (1024 kB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] .data : 0xc0c00000 - 0xc0c2e878 ( 187 kB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] .bss : 0xc0c30000 - 0xc0c8ae04 ( 364 kB)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Hierarchical RCU implementation.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] NR_IRQS:16 nr_irqs:16 16
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000007] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000020] Switching to timer-based delay loop, resolution 160ns
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000184] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000204] pid_max: default: 32768 minimum: 301
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000317] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000330] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000929] CPU: Testing write buffer coherency: ok
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.001212] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.001263] Setting up static identity map for 0x42300000 - 0x4230003c
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.004281] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.004451] Brought up 2 CPUs
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.004472] SMP: Total of 2 processors activated (25.00 BogoMIPS).
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.004483] CPU: All CPU(s) started in SVC mode.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.016812] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.017008] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.017033] futex hash table entries: 512 (order: 3, 32768 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.017098] pinctrl core: initialized pinctrl subsystem
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.018211] NET: Registered protocol family 16
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.018544] DMA: preallocated 256 KiB pool for atomic coherent allocations
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.041431] cpuidle: using governor ladder
Dec 31 18:00:14 EA8500 kern.err kernel: [ 0.104665] msm_bus_fabric_init_driver
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.105882] pps_core: LinuxPPS API ver. 1 registered
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.105898] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.105940] PTP clock support registered
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.108061] clocksource: Switched to clocksource dg_timer
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.112036] NET: Registered protocol family 2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.112204] IP idents hash table entries: 8192 (order: 4, 65536 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.112960] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.112998] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.113053] TCP: Hash tables configured (established 4096 bind 4096)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.113108] UDP hash table entries: 256 (order: 1, 8192 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.113134] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.113296] NET: Registered protocol family 1
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.113346] PCI: CLS 0 bytes, default 64
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.117235] workingset: timestamp_bits=30 max_order=17 bucket_order=0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.126683] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.132978] cryptodev: driver 1.9 loaded.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.133011] io scheduler noop registered
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.133025] io scheduler deadline registered (default)
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.134747] 1b500000.pci supply vdda not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.134844] 1b500000.pci supply vdda_phy not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.134929] 1b500000.pci supply vdda_refclk not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.135659] OF: PCI: host bridge /soc/pci@1b500000 ranges:
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.135702] OF: PCI: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.135729] OF: PCI: MEM 0x08000000..0x0fdfffff -> 0x08000000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.238453] qcom-pcie 1b500000.pci: link up
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.238636] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.238658] pci_bus 0000:00: root bus resource [bus 00-ff]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.238675] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.238689] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.238741] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.238896] pci 0000:00:00.0: supports D1
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.238906] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.239205] PCI: bus0: Fast back to back transfers disabled
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.239528] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.239774] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.240931] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.241514] PCI: bus1: Fast back to back transfers disabled
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.241803] pci 0000:00:00.0: BAR 14: assigned [mem 0x08000000-0x081fffff]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.241827] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.241964] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.241984] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.242404] aer 0000:00:00.0:pcie002: service driver aer loaded
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.242843] 1b700000.pci supply vdda not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.242953] 1b700000.pci supply vdda_phy not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.243042] 1b700000.pci supply vdda_refclk not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.243752] OF: PCI: host bridge /soc/pci@1b700000 ranges:
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.243787] OF: PCI: IO 0x31e00000..0x31efffff -> 0x31e00000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.243809] OF: PCI: MEM 0x2e000000..0x31dfffff -> 0x2e000000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.348449] qcom-pcie 1b700000.pci: link up
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.348627] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.348644] pci_bus 0001:00: root bus resource [bus 00-ff]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.348658] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.348703] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.348825] pci 0001:00:00.0: supports D1
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.348835] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.349094] PCI: bus0: Fast back to back transfers disabled
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.349395] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.349620] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.350689] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.351248] PCI: bus1: Fast back to back transfers disabled
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.351617] pci 0001:00:00.0: BAR 14: assigned [mem 0x2e000000-0x2e1fffff]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.351640] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.351763] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.351781] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.352162] aer 0001:00:00.0:pcie002: service driver aer loaded
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.352607] 1b900000.pci supply vdda not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.352704] 1b900000.pci supply vdda_phy not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.352785] 1b900000.pci supply vdda_refclk not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.353527] OF: PCI: host bridge /soc/pci@1b900000 ranges:
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.353561] OF: PCI: IO 0x35e00000..0x35efffff -> 0x35e00000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.353584] OF: PCI: MEM 0x32000000..0x35dfffff -> 0x32000000
Dec 31 18:00:14 EA8500 kern.err kernel: [ 1.358437] qcom-pcie 1b900000.pci: phy link never came up
Dec 31 18:00:14 EA8500 kern.err kernel: [ 1.360284] qcom-pcie 1b900000.pci: hostinit failed
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 1.361007] deviceless supply s1b not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.362562] L2 @ QSB rate. Forcing new rate.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.362737] L2 @ 800000 KHz
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.362845] CPU0 @ 800000 KHz
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.362855] CPU1 @ QSB rate. Forcing new rate.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.362978] CPU1 @ 800000 KHz
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.365048] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.366720] serial8250_init
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.366732] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.367732] msm_serial 16340000.serial: msm_serial: detected port #0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.367803] msm_serial 16340000.serial: uartclk = 7372800
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.367864] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 201, base_baud = 460800) is a MSM
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.367896] msm_serial: console setup on port #0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.114688] console [ttyMSM0] enabled
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.119439] msm_serial: driver initialized
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.124573] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.126766] nand: AMD/Spansion S34MS01G2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.133358] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.137590] 19 ofpart partitions found on MTD device qcom_nand.0
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.144641] Creating 19 MTD partitions on "qcom_nand.0":
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.150793] 0x000000000000-0x000000040000 : "SBL1"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.157216] 0x000000040000-0x000000180000 : "MIBIB"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.163236] 0x000000180000-0x0000002c0000 : "SBL2"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.167983] 0x0000002c0000-0x000000540000 : "SBL3"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.170907] random: fast init done
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.178803] 0x000000540000-0x000000660000 : "DDRCONFIG"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.181130] 0x000000660000-0x000000780000 : "SSD"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.185904] 0x000000780000-0x000000a00000 : "TZ"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.192704] 0x000000a00000-0x000000c80000 : "RPM"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.197324] 0x000000c80000-0x000000dc0000 : "art"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.200210] 0x000000dc0000-0x000000ec0000 : "APPSBL"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.204552] 0x000000ec0000-0x000000f00000 : "u_env"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.208566] 0x000000f00000-0x000000f40000 : "s_env"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.213088] 0x000000f40000-0x000000f80000 : "devinfo"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.217997] 0x000000f80000-0x000003780000 : "linux"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.275744] 0x000001280000-0x000003780000 : "rootfs"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.325855] mtd: partition "rootfs" set to be root filesystem
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.325886] 0x000003780000-0x000005f40000 : "linux2"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.384408] 0x000003a80000-0x000005f40000 : "rootfs2"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.434030] 0x000005f40000-0x000005f80000 : "nvram"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.435203] 0x000005f80000-0x000008000000 : "ddwrt"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.459291] random: crng init done
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.482683] libphy: GPIO Bitbanged MDIO: probed
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.485876] libphy: Fixed MDIO Bus: probed
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.507064] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.357787] stmmac - user ID: 0x10, Synopsys ID: 0x37
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.357814] Ring mode enabled
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.361874] DMA HW capability register supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.364765] Enhanced/Alternate descriptors
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.370404] Enabled extended descriptors
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.373364] RX Checksum Offload Engine supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.377530] COE Type 2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.382266] TX Checksum insertion supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.384474] Wake-Up On Lan supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.389051] eth%d: device MAC address 00:06:3b:01:41:00
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.392550] Enable RX Mitigation via HW Watchdog Timer
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.398874] stmmac - user ID: 0x10, Synopsys ID: 0x37
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.402792] Ring mode enabled
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.407996] DMA HW capability register supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.411011] Enhanced/Alternate descriptors
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.416591] Enabled extended descriptors
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.419634] RX Checksum Offload Engine supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.423718] COE Type 2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.428468] TX Checksum insertion supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.430660] Wake-Up On Lan supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.435177] eth%d: device MAC address 00:03:7f:ba:db:02
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.438809] Enable RX Mitigation via HW Watchdog Timer
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.444567] i2c /dev entries driver
Dec 31 18:00:14 EA8500 kern.err kernel: [ 3.449657] Calibration not found.
Dec 31 18:00:14 EA8500 kern.err kernel: [ 3.453552] CPUidle arm: CPU 0 failed to init idle CPU ops
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.456400] GACT probability NOT on
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.461484] Mirror/redirect action on
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.464802] Simple TC action Loaded
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.469274] netem: version 1.3
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.471919] u32 classifier
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.475015] Performance counters on
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.477708] input device check on
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.481515] Actions configured
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.485270] Netfilter messages via NETLINK v0.30.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.488891] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 3.493918] nf_conntrack_rtsp v0.7 loading
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.499685] xt_time: kernel timezone is -0000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.503326] ip_set: protocol 6
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.507936] gre: GRE over IPv4 demultiplexor driver
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 3.511198] nf_nat_rtsp v0.7 loading
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.515492] ip_tables: (C) 2000-2006 Netfilter Core Team
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.519530] NET: Registered protocol family 17
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 3.524653] Bridge firewalling registered
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.528914] 8021q: 802.1Q VLAN Support v1.8
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 3.533040] Registering SWP/SWPB emulation handler
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.537224] registered taskstats version 1
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.551010] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.569474] s1a: Bringing 0uV into 1050000-1050000uV
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.569740] s1b: Bringing 0uV into 1050000-1050000uV
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.573707] s2a: Bringing 0uV into 800000-800000uV
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.578768] s2b: Bringing 0uV into 800000-800000uV
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.586842] trying to register driver cpufreq-dt
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.589411] searching for nvram
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.592697] nvram size = 262144
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.681038] found nvram at 20000
Dec 31 18:00:14 EA8500 kern.err kernel: [ 3.726124] no valid UBI magic found inside mtd13
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.726179] hctosys: unable to open rtc device (rtc0)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.738664] VFS: Mounted root (squashfs filesystem) readonly on device 31:14.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.739578] Freeing unused kernel memory: 1024K
Dec 31 18:00:14 EA8500 kern.info kernel: [ 7.335695] Loading modules backported from Linux version v5.10-rc6-0-gb65054597872
Dec 31 18:00:14 EA8500 kern.info kernel: [ 7.335726] Backport generated by backports.git v5.10-rc6-1-0-g3a9d70a3
Dec 31 18:00:14 EA8500 kern.info kernel: [ 7.808450] ath9k: ath9k: Driver unloaded
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.129988] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.130674] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 8.334153] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.636604] ath10k_pci 0000:01:00.0: found firmware features ie (8 B)
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 8.636646] ath10k_pci 0000:01:00.0: Unknown FW IE: 30
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.642139] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.647072] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.659865] ath10k_pci 0000:01:00.0: firmware ver 10.4-ddwrt-9980-tW-13-6369M api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate crc32 13885e7d
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.716693] ath10k_pci 0000:01:00.0: boot get otp board id result 0x00008800 board_id 2 chip_id 1 ext_bid_support 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.716737] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=2'
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.726006] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=2'
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.758870] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:2 crc32 792a3d38
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.780170] ath10k_pci 0000:01:00.0: boot already acquired valid otp board id,skip download, board_id 2 chip_id 1
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.800724] ath10k_pci 0000:01:00.0: boot upload otp to 0x1234 len 9477
Dec 31 18:00:14 EA8500 kern.info kernel: [ 9.857127] ath10k_pci 0000:01:00.0: Init Max Stations to 64
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 9.929634] ath10k_pci 0000:01:00.0: wmi debug print truncated: 128
Dec 31 18:00:14 EA8500 kern.info kernel: [ 9.929673] ath10k_pci 0000:01:00.0: ChipType 1200 ChipTypeID 0 BoardID 1 P 80/80 V 16 K 160 PH 272 T 282 msdu-desc: 2500 sw-crypt: 0 c
Dec 31 18:00:14 EA8500 kern.info kernel: [ 9.934813] ath10k_pci 0000:01:00.0: free: 24772 iram: 33152 sram: 18196
Dec 31 18:00:14 EA8500 kern.info kernel: [ 9.947308] ath10k_pci 0000:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr c0:56:27:08:b2:92 status 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 9.985420] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 64 raw 0 hwcrypto 1
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 10.098466] ath: EEPROM regdomain sanitized
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 10.098478] ath: EEPROM regdomain: 0x64
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 10.098486] ath: EEPROM indicates we should expect a direct regpair map
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 10.098503] ath: Country alpha2 being used: 00
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 10.098509] ath: Regpair used: 0x64
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.098579] initialize fq_codel with 33554432 bytes memory limit
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.098755] ieee80211_txq_setup_flows: set limit to 4194304 bytes
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.108973] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.110280] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 10.289757] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.289822] ath10k_pci 0001:01:00.0: found firmware features ie (8 B)
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 10.299465] ath10k_pci 0001:01:00.0: Unknown FW IE: 30
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.305875] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.310985] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.324161] ath10k_pci 0001:01:00.0: firmware ver 10.4-ddwrt-9980-tW-13-6369M api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate crc32 13885e7d
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.380456] ath10k_pci 0001:01:00.0: boot get otp board id result 0x00008400 board_id 1 chip_id 1 ext_bid_support 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.380501] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=1'
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.389785] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=1'
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.399675] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:1 crc32 792a3d38
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.428535] ath10k_pci 0001:01:00.0: boot already acquired valid otp board id,skip download, board_id 1 chip_id 1
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.448996] ath10k_pci 0001:01:00.0: boot upload otp to 0x1234 len 9477
Dec 31 18:00:14 EA8500 kern.info kernel: [ 11.501831] ath10k_pci 0001:01:00.0: Init Max Stations to 64
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 11.572202] ath10k_pci 0001:01:00.0: wmi debug print truncated: 128
Dec 31 18:00:14 EA8500 kern.info kernel: [ 11.572227] ath10k_pci 0001:01:00.0: ChipType 1200 ChipTypeID 0 BoardID 2 P 80/80 V 16 K 160 PH 272 T 282 msdu-desc: 2500 sw-crypt: 0 c
Dec 31 18:00:14 EA8500 kern.info kernel: [ 11.577351] ath10k_pci 0001:01:00.0: free: 24772 iram: 33152 sram: 18196
Dec 31 18:00:14 EA8500 kern.info kernel: [ 11.589833] ath10k_pci 0001:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr c0:56:27:08:b2:92 status 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 11.626468] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 64 raw 0 hwcrypto 1
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 11.723894] ath: EEPROM regdomain sanitized
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 11.723904] ath: EEPROM regdomain: 0x64
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 11.723910] ath: EEPROM indicates we should expect a direct regpair map
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 11.723923] ath: Country alpha2 being used: 00
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 11.723927] ath: Regpair used: 0x64
Dec 31 18:00:14 EA8500 kern.info kernel: [ 11.723984] initialize fq_codel with 33554432 bytes memory limit
Dec 31 18:00:14 EA8500 kern.info kernel: [ 11.724102] ieee80211_txq_setup_flows: set limit to 33554432 bytes
Dec 31 18:00:14 EA8500 kern.info kernel: [ 12.832462] dwmac1000: Master AXI performs any burst length
Dec 31 18:00:14 EA8500 kern.info kernel: [ 12.832526] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 12.837100] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
Dec 31 18:00:14 EA8500 kern.info kernel: [ 12.941425] dwmac1000: Master AXI performs any burst length
Dec 31 18:00:14 EA8500 kern.info kernel: [ 12.941465] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 12.945918] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
Dec 31 18:00:14 EA8500 kern.info kernel: [ 13.848463] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
Dec 31 18:00:14 EA8500 daemon.info smartd[888]: smartd 7.2 2020-12-30 r5155 [armv7l-linux-4.9.296] (local build)
Dec 31 18:00:14 EA8500 daemon.info smartd[888]: Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
Dec 31 18:00:14 EA8500 daemon.info smartd[888]: Opened configuration file /usr/etc/smartd.conf
Dec 31 18:00:14 EA8500 daemon.info smartd[888]: Drive: DEVICESCAN, implied '-a' Directive on line 32 of file /usr/etc/smartd.conf
Dec 31 18:00:14 EA8500 daemon.info smartd[888]: Configuration file /usr/etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Dec 31 18:00:14 EA8500 daemon.crit smartd[888]: In the system's table of devices NO devices found to scan
Dec 31 18:00:14 EA8500 daemon.info smartd[888]: Unable to monitor any SMART enabled devices. Try debug (-d) option. Exiting...
Dec 31 18:00:14 EA8500 user.info : [resetbutton] : resetbutton daemon successfully started
Dec 31 18:00:14 EA8500 user.info : [bridge] : bridge br0 successfully added
Dec 31 18:00:14 EA8500 daemon.info mstpd[764]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
Dec 31 18:00:14 EA8500 daemon.info mstpd[764]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
Dec 31 18:00:14 EA8500 daemon.info mstpd[764]: error, CTL_set_msti_bridge_config: Couldn't find bridge with index 9
Dec 31 18:00:14 EA8500 user.info : [bridge] : interface wlan0 successfully deleted from bridge br0
Dec 31 18:00:14 EA8500 user.info : [bridge] : interface wlan1 successfully deleted from bridge br0
Dec 31 18:00:14 EA8500 user.info : [bridge] : bridge br0 successfully added
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.895827] device br0 entered promiscuous mode
Dec 31 18:00:14 EA8500 daemon.info mstpd[764]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
Dec 31 18:00:14 EA8500 daemon.info mstpd[764]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
Dec 31 18:00:14 EA8500 user.info : [bridge] : interface vlan1 successfully added to bridge br0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.950801] br0: port 1(vlan1) entered blocking state
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.953441] br0: port 1(vlan1) entered disabled state
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.958720] device vlan1 entered promiscuous mode
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.963507] device eth0 entered promiscuous mode
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.968250] br0: port 1(vlan1) entered blocking state
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.972964] br0: port 1(vlan1) entered forwarding state
Dec 31 18:00:14 EA8500 user.info : [bridge] : interface vlan2 successfully added to bridge br0
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.006267] br0: port 2(vlan2) entered blocking state
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.009042] br0: port 2(vlan2) entered disabled state
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.014194] device vlan2 entered promiscuous mode
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.019139] br0: port 2(vlan2) entered blocking state
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.023721] br0: port 2(vlan2) entered forwarding state
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.034495] device br0 left promiscuous mode
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.037942] device br0 entered promiscuous mode
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.045363] device br0 left promiscuous mode
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.145538] ath: EEPROM regdomain: 0x8348
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.145544] ath: EEPROM indicates we should expect a country code
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.145549] ath: doing EEPROM country->regdmn map search
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.145554] ath: country maps to regdmn code: 0x3a
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.145558] ath: Country alpha2 being used: US
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.145561] ath: Regpair used: 0x3a
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.145565] ath: regdomain 0x8348 dynamically updated by user
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.145581] ath: EEPROM regdomain: 0x8348
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.145584] ath: EEPROM indicates we should expect a country code
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.145588] ath: doing EEPROM country->regdmn map search
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.145591] ath: country maps to regdmn code: 0x3a
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.145594] ath: Country alpha2 being used: US
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.145597] ath: Regpair used: 0x3a
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.145600] ath: regdomain 0x8348 dynamically updated by user
Dec 31 18:00:15 EA8500 daemon.info smartd[1065]: smartd 7.2 2020-12-30 r5155 [armv7l-linux-4.9.296] (local build)
Dec 31 18:00:15 EA8500 user.info : [klogd] : kernel log daemon successfully stopped
Dec 31 18:00:15 EA8500 user.info : [hwmon] : successfully started
Dec 31 18:00:15 EA8500 kern.notice kernel: klogd: exiting
Dec 31 18:00:15 EA8500 daemon.info smartd[1065]: Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
Dec 31 18:00:15 EA8500 daemon.info smartd[1065]: Opened configuration file /usr/etc/smartd.conf
Dec 31 18:00:15 EA8500 daemon.info smartd[1065]: Drive: DEVICESCAN, implied '-a' Directive on line 32 of file /usr/etc/smartd.conf
Dec 31 18:00:15 EA8500 daemon.info smartd[1065]: Configuration file /usr/etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Dec 31 18:00:15 EA8500 daemon.crit smartd[1065]: In the system's table of devices NO devices found to scan
Dec 31 18:00:15 EA8500 daemon.info smartd[1065]: Unable to monitor any SMART enabled devices. Try debug (-d) option. Exiting...
Dec 31 18:00:15 EA8500 user.info : [syslogd] : syslog daemon successfully stopped
Dec 31 18:00:15 EA8500 syslog.info syslogd exiting
Dec 31 18:00:15 EA8500 syslog.info syslogd started: BusyBox v1.35.0
Dec 31 18:00:15 EA8500 user.info : [klogd] : daemon successfully started
Dec 31 18:00:15 EA8500 kern.notice kernel: klogd started: BusyBox v1.35.0 (2022-01-08 01:43:45 +07)
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.566798] tun: Universal TUN/TAP device driver, 1.6
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.571460] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Dec 31 18:00:15 EA8500 user.info : [dropbear] : ssh daemon successfully started
Dec 31 18:00:15 EA8500 authpriv.info dropbear[1113]: Running in background
Dec 31 18:00:15 EA8500 user.info : [cron] : daemon successfully started
Dec 31 18:00:15 EA8500 cron.info cron[1114]: (CRON) STARTUP (fork ok)
Dec 31 18:00:15 EA8500 cron.info cron[1114]: (crontabs) ORPHAN (no passwd entry)
Dec 31 18:00:15 EA8500 user.info root: WireGuard number of non failed tunnels in fail set: 0
Dec 31 18:00:16 EA8500 daemon.warn openvpn[1111]: DEPRECATED OPTION: ncp-disable. Disabling cipher negotiation is a deprecated debug feature that will be removed in OpenVPN 2.6
Dec 31 18:00:16 EA8500 daemon.warn openvpn[1111]: WARNING: Using --management on a TCP port WITHOUT passwords is STRONGLY discouraged and considered insecure
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1111]: OpenVPN 2.5.5 arm-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD] built on Jan 8 2022
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1111]: library versions: OpenSSL 1.1.1m 14 Dec 2021, LZO 2.09
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1169]: MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:14
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1169]: net_route_v4_best_gw query: dst 0.0.0.0
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1169]: net_route_v4_best_gw result: via 10.72.28.13 dev br0
Dec 31 18:00:16 EA8500 daemon.warn openvpn[1169]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1169]: Diffie-Hellman initialized with 2048 bit key
Dec 31 18:00:16 EA8500 daemon.warn openvpn[1169]: WARNING: Your certificate is not yet valid!
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1169]: TUN/TAP device tun2 opened
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1169]: net_iface_mtu_set: mtu 1500 for tun2
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1169]: net_iface_up: set tun2 up
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1169]: net_addr_v4_add: 10.19.92.225/27 dev tun2
Dec 31 18:00:16 EA8500 daemon.warn openvpn[1169]: Could not determine IPv4/IPv6 protocol. Using AF_INET
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1169]: Socket Buffers: R=[180224->180224] S=[180224->180224]
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1169]: UDPv4 link local (bound): [AF_INET][undef]:xxxxx
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1169]: UDPv4 link remote: [AF_UNSPEC]
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1169]: MULTI: multi_init called, r=256 v=256
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1169]: IFCONFIG POOL IPv4: base=10.19.92.226 size=29
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1169]: IFCONFIG POOL LIST
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1169]: Initialization Sequence Completed
Dec 31 18:00:16 EA8500 kern.info kernel: [ 16.725792] Linux kernel CIFS/SMB SERVER 3.4.3 by Namjae Jeon <linkinjeon@kernel.org>
Dec 31 18:00:16 EA8500 user.info wsdd2[1266]: starting.
Dec 31 18:00:16 EA8500 user.info : [smbd] : samba started
Dec 31 18:00:16 EA8500 local5.err ksmbd: [ksmbd-manager/1274]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory
Dec 31 18:00:16 EA8500 local5.info ksmbd: [ksmbd-worker/1277]: INFO: User already exists nobody
Dec 31 18:00:16 EA8500 kern.info kernel: [ 16.838926] ip6_tables: (C) 2000-2006 Netfilter Core Team
Dec 31 18:00:17 EA8500 user.info : [wland] : daemon successfully stopped
Dec 31 18:00:17 EA8500 user.info : [wland] : daemon successfully started
Dec 31 18:00:17 EA8500 user.info root: WireGuard number of non failed tunnels in fail set: 0
Dec 31 18:00:17 EA8500 daemon.info httpd[1378]: [httpd] : httpd server started at port 80
Dec 31 18:00:17 EA8500 user.info : [httpd] : http daemon successfully started
Dec 31 18:00:18 EA8500 user.info : [process_monitor] : successfully started
Dec 31 18:00:18 EA8500 user.info : [httpd] : daemon successfully stopped
Dec 31 18:00:18 EA8500 daemon.info httpd[1403]: [httpd] : httpd server shutdown
Dec 31 18:00:18 EA8500 daemon.info httpd[1584]: [httpd] : httpd server started at port 80
Dec 31 18:00:18 EA8500 user.info : [httpd] : http daemon successfully started
Dec 31 18:00:18 EA8500 user.info : [resetbutton] : daemon successfully stopped
Dec 31 18:00:18 EA8500 user.info : [resetbutton] : resetbutton daemon successfully started
Dec 31 18:00:18 EA8500 kern.info kernel: [ 18.505336] usbcore: registered new interface driver usbfs
Dec 31 18:00:18 EA8500 kern.info kernel: [ 18.505427] usbcore: registered new interface driver hub
Dec 31 18:00:18 EA8500 kern.info kernel: [ 18.509828] usbcore: registered new device driver usb
Dec 31 18:00:18 EA8500 kern.info kernel: [ 18.562064] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Dec 31 18:00:18 EA8500 kern.info kernel: [ 18.569809] ehci-platform: EHCI generic platform driver
Dec 31 18:00:18 EA8500 kern.info kernel: [ 18.588521] ehci-pci: EHCI PCI platform driver
Dec 31 18:00:18 EA8500 kern.info kernel: [ 18.667930] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Dec 31 18:00:18 EA8500 daemon.debug ntpclient[1561]: Connecting to 2.pool.ntp.org [38.229.59.9] ...
Jan 7 14:54:03 EA8500 daemon.info ntpclient[1561]: Time set from 2.pool.ntp.org [38.229.59.9].
Jan 7 14:54:03 EA8500 daemon.info process_monitor[1560]: cyclic NTP Update success (servers 2.pool.ntp.org 212.18.3.19 88.99.174.22)
Jan 7 14:54:03 EA8500 kern.info kernel: [ 19.019189] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Jan 7 14:54:03 EA8500 kern.info kernel: [ 19.019539] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
Jan 7 14:54:03 EA8500 kern.info kernel: [ 19.025071] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Jan 7 14:54:03 EA8500 kern.info kernel: [ 19.032547] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
Jan 7 14:54:03 EA8500 kern.info kernel: [ 19.033618] hub 1-0:1.0: USB hub found
Jan 7 14:54:03 EA8500 kern.info kernel: [ 19.033916] hub 1-0:1.0: 1 port detected
Jan 7 14:54:03 EA8500 kern.info kernel: [ 19.034196] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Jan 7 14:54:03 EA8500 kern.info kernel: [ 19.034217] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
Jan 7 14:54:03 EA8500 kern.info kernel: [ 19.034676] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Jan 7 14:54:03 EA8500 kern.info kernel: [ 19.035630] hub 2-0:1.0: USB hub found
Jan 7 14:54:03 EA8500 kern.info kernel: [ 19.036031] hub 2-0:1.0: 1 port detected
Jan 7 14:54:03 EA8500 kern.info kernel: [ 19.113023] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Jan 7 14:54:03 EA8500 kern.info kernel: [ 19.113077] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
Jan 7 14:54:03 EA8500 kern.info kernel: [ 19.117541] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Jan 7 14:54:03 EA8500 kern.info kernel: [ 19.125088] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
Jan 7 14:54:03 EA8500 kern.info kernel: [ 19.134882] hub 3-0:1.0: USB hub found
Jan 7 14:54:03 EA8500 kern.info kernel: [ 19.143579] hub 3-0:1.0: 1 port detected
Jan 7 14:54:03 EA8500 kern.info kernel: [ 19.147545] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Jan 7 14:54:03 EA8500 kern.info kernel: [ 19.151189] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
Jan 7 14:54:03 EA8500 kern.info kernel: [ 19.151300] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
Jan 7 14:54:03 EA8500 kern.info kernel: [ 19.151786] hub 4-0:1.0: USB hub found
Jan 7 14:54:03 EA8500 kern.info kernel: [ 19.151819] hub 4-0:1.0: 1 port detected
Jan 7 14:54:04 EA8500 kern.info kernel: [ 19.418232] usb 3-1: new high-speed USB device number 2 using xhci-hcd
Jan 7 14:54:04 EA8500 user.info root: WireGuard number of non failed tunnels in fail set: 0
Jan 7 14:54:04 EA8500 kern.info kernel: [ 19.618223] usb 1-1: new high-speed USB device number 2 using xhci-hcd
Jan 7 14:54:05 EA8500 kern.info kernel: [ 20.598312] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
Jan 7 14:54:05 EA8500 daemon.debug process_monitor[1560]: Restarting cron (time sync change)
Jan 7 14:54:05 EA8500 user.info : [cron] : daemon successfully stopped
Jan 7 14:54:05 EA8500 user.info : [cron] : daemon successfully started
Jan 7 14:54:05 EA8500 cron.info cron[2012]: (CRON) STARTUP (fork ok)
Jan 7 14:54:05 EA8500 user.info : [process_monitor] : daemon successfully stopped
Jan 7 14:54:05 EA8500 daemon.info process_monitor[1560]: [process_monitor] : cleanup timers
Jan 7 14:54:05 EA8500 user.info : [process_monitor] : successfully started
Jan 7 14:54:05 EA8500 daemon.debug process_monitor[2018]: We need to re-update after 3600 seconds
Jan 7 14:54:05 EA8500 daemon.info process_monitor[2018]: [process_monitor] : set timer: 3600 seconds, callback: ntp_main()
Jan 7 14:54:08 EA8500 kern.info kernel: [ 24.234583] xhci-hcd xhci-hcd.1.auto: remove, state 1
Jan 7 14:54:08 EA8500 kern.info kernel: [ 24.234620] usb usb4: USB disconnect, device number 1
Jan 7 14:54:08 EA8500 kern.info kernel: [ 24.239804] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered
Jan 7 14:54:08 EA8500 kern.info kernel: [ 24.244111] xhci-hcd xhci-hcd.1.auto: remove, state 1
Jan 7 14:54:08 EA8500 kern.info kernel: [ 24.249463] usb usb3: USB disconnect, device number 1
Jan 7 14:54:08 EA8500 kern.info kernel: [ 24.254321] usb 3-1: USB disconnect, device number 2
Jan 7 14:54:08 EA8500 kern.info kernel: [ 24.261671] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered
Jan 7 14:54:08 EA8500 kern.info kernel: [ 24.264940] xhci-hcd xhci-hcd.0.auto: remove, state 1
Jan 7 14:54:08 EA8500 kern.info kernel: [ 24.270143] usb usb2: USB disconnect, device number 1
Jan 7 14:54:08 EA8500 kern.info kernel: [ 24.274984] usb 2-1: USB disconnect, device number 2
Jan 7 14:54:08 EA8500 kern.info kernel: [ 24.282768] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
Jan 7 14:54:08 EA8500 kern.info kernel: [ 24.285527] xhci-hcd xhci-hcd.0.auto: remove, state 1
Jan 7 14:54:08 EA8500 kern.info kernel: [ 24.290791] usb usb1: USB disconnect, device number 1
Jan 7 14:54:08 EA8500 kern.info kernel: [ 24.300620] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
Jan 7 14:54:08 EA8500 kern.info kernel: [ 24.336280] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Jan 7 14:54:08 EA8500 kern.info kernel: [ 24.336363] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.340884] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.348225] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.357511] hub 1-0:1.0: USB hub found
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.363408] hub 1-0:1.0: 1 port detected
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.367014] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.370904] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.376171] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.384229] hub 2-0:1.0: USB hub found
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.392271] hub 2-0:1.0: 1 port detected
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.395979] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.399705] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.405091] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.412534] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.421810] hub 3-0:1.0: USB hub found
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.427478] hub 3-0:1.0: 1 port detected
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.431483] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.435038] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.440457] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.448456] hub 4-0:1.0: USB hub found
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.456234] hub 4-0:1.0: 1 port detected
Jan 7 14:54:09 EA8500 kern.notice kernel: [ 24.508477] SCSI subsystem initialized
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.607998] usbcore: registered new interface driver usb-storage
Jan 7 14:54:09 EA8500 kern.debug kernel: [ 24.665442] libata version 3.00 loaded.
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.718496] usb 3-1: new high-speed USB device number 2 using xhci-hcd
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.724780] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.724832] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.729481] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.738873] scsi host0: ahci
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.746407] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 95
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.749763] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.794570] usb-storage 2-1:1.0: USB Mass Storage device detected
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.794730] usb-storage 2-1:1.0: Quirks match for vid 090c pid 1000: 400
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.799998] scsi host1: usb-storage 2-1:1.0
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.889257] usb-storage 3-1:1.0: USB Mass Storage device detected
Jan 7 14:54:09 EA8500 kern.info kernel: [ 24.893218] scsi host2: usb-storage 3-1:1.0
Jan 7 14:54:09 EA8500 kern.info kernel: [ 25.089770] ata1: SATA link down (SStatus 0 SControl 300)
Jan 7 14:54:09 EA8500 kern.info kernel: [ 25.265763] sdhci: Secure Digital Host Controller Interface driver
Jan 7 14:54:09 EA8500 kern.info kernel: [ 25.265789] sdhci: Copyright(c) Pierre Ossman
Jan 7 14:54:09 EA8500 kern.info kernel: [ 25.278662] sdhci-pltfm: SDHCI platform and OF driver helper
Jan 7 14:54:10 EA8500 kern.notice kernel: [ 25.929512] scsi 2:0:0:0: Direct-Access USB Flash Drive 1.00 PQ: 0 ANSI: 6
Jan 7 14:54:10 EA8500 kern.notice kernel: [ 26.070840] scsi 1:0:0:0: Direct-Access Samsung Flash Drive 1100 PQ: 0 ANSI: 6
Jan 7 14:54:10 EA8500 kern.notice kernel: [ 26.073156] sd 1:0:0:0: [sda] 62656641 512-byte logical blocks: (32.1 GB/29.9 GiB)
Jan 7 14:54:10 EA8500 kern.notice kernel: [ 26.075488] sd 2:0:0:0: [sdb] 30629376 512-byte logical blocks: (15.7 GB/14.6 GiB)
Jan 7 14:54:10 EA8500 kern.notice kernel: [ 26.076668] sd 2:0:0:0: [sdb] Write Protect is off
Jan 7 14:54:10 EA8500 kern.debug kernel: [ 26.076680] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
Jan 7 14:54:10 EA8500 kern.notice kernel: [ 26.077042] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Jan 7 14:54:10 EA8500 kern.info kernel: [ 26.082717] sdb: sdb1
Jan 7 14:54:10 EA8500 kern.notice kernel: [ 26.089248] sd 2:0:0:0: [sdb] Attached SCSI removable disk
Jan 7 14:54:10 EA8500 kern.notice kernel: [ 26.119535] sd 1:0:0:0: [sda] Write Protect is off
Jan 7 14:54:10 EA8500 kern.debug kernel: [ 26.119569] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
Jan 7 14:54:10 EA8500 kern.notice kernel: [ 26.119952] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 7 14:54:10 EA8500 kern.info kernel: [ 26.127809] sda: sda1
Jan 7 14:54:10 EA8500 kern.notice kernel: [ 26.135846] sd 1:0:0:0: [sda] Attached SCSI removable disk
Jan 7 14:54:10 EA8500 user.info : [cron] : daemon successfully stopped
Jan 7 14:54:10 EA8500 user.info : [wsdd2] : windows service discovery daemon successfully stopped
Jan 7 14:54:10 EA8500 user.debug wsdd2[1266]: 'Terminated' signal received.
Jan 7 14:54:10 EA8500 user.info wsdd2[1266]: terminating.
Jan 7 14:54:10 EA8500 user.info : [ksmbd.mountd] : samba daemon successfully stopped
Jan 7 14:54:10 EA8500 local5.info ksmbd: [ksmbd-worker/1277]: INFO: Child received signal: 15 (Terminated)
Jan 7 14:54:10 EA8500 local5.err ksmbd: [ksmbd-manager/1274]: ERROR: WARNING: child process exited abnormally: 1277
Jan 7 14:54:10 EA8500 local5.err ksmbd: [ksmbd-manager/1274]: ERROR: can't execute kill 1277: No such process
Jan 7 14:54:10 EA8500 local5.info ksmbd: [ksmbd-manager/1274]: INFO: Exiting. Bye!
Jan 7 14:54:11 EA8500 kern.info kernel: [ 26.360083] ksmbd: kill command received
Jan 7 14:54:11 EA8500 user.info : [cron] : daemon successfully started
Jan 7 14:54:11 EA8500 cron.info cron[2253]: (CRON) STARTUP (fork ok)
Jan 7 14:54:11 EA8500 kern.warn kernel: [ 27.022840] EXT4-fs (sda1): Ignoring removed nobh option
Jan 7 14:54:11 EA8500 kern.info kernel: [ 27.025137] EXT4-fs (sda1): barriers disabled
Jan 7 14:54:11 EA8500 kern.info kernel: [ 27.030863] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: init_itable=0,nobarrier,nobh,barrier=0
Jan 7 14:54:11 EA8500 user.info : [cron] : daemon successfully stopped
Jan 7 14:54:11 EA8500 user.info : [cron] : daemon successfully started
Jan 7 14:54:11 EA8500 cron.info cron[2300]: (CRON) STARTUP (fork ok)
Jan 7 14:54:11 EA8500 kern.warn kernel: [ 27.159888] EXT4-fs (sdb1): Ignoring removed nobh option
Jan 7 14:54:11 EA8500 kern.info kernel: [ 27.168720] EXT4-fs (sdb1): barriers disabled
Jan 7 14:54:11 EA8500 kern.info kernel: [ 27.192641] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: init_itable=0,nobarrier,nobh,barrier=0
Jan 7 14:54:11 EA8500 user.info : [cron] : daemon successfully stopped
Jan 7 14:54:11 EA8500 user.info : [cron] : daemon successfully started
Jan 7 14:54:11 EA8500 cron.info cron[2349]: (CRON) STARTUP (fork ok)
Jan 7 14:54:11 EA8500 cron.info cron[2354]: (CRON) DEATH (can't lock /var/run/crond.pid, otherpid may be 2349: Resource temporarily unavailable)
Jan 7 14:54:11 EA8500 user.info : [cron] : daemon successfully started
Jan 7 14:54:12 EA8500 kern.info kernel: [ 28.075213] Linux kernel CIFS/SMB SERVER 3.4.3 by Namjae Jeon <linkinjeon@kernel.org>
Jan 7 14:54:12 EA8500 user.info : [smbd] : samba started
Jan 7 14:54:12 EA8500 user.info wsdd2[2523]: starting.
Jan 7 14:54:12 EA8500 local5.info ksmbd: [ksmbd-worker/2531]: INFO: User already exists nobody
Jan 7 14:54:12 EA8500 user.info wsdd2[2563]: starting.
Jan 7 14:54:12 EA8500 user.info : [smbd] : samba started
Jan 7 14:54:12 EA8500 local5.info ksmbd: [ksmbd-manager/2570]: INFO: File '/tmp/ksmbd.lock' belongs to pid 2529
Jan 7 14:54:12 EA8500 local5.err ksmbd: [ksmbd-manager/2570]: ERROR: Failed to create lock file: File exists
Jan 7 14:54:12 EA8500 local5.info ksmbd: [ksmbd-manager/2570]: INFO: Exiting. Bye!
Jan 7 14:54:13 EA8500 user.info wsdd2[2591]: starting.
Jan 7 14:54:13 EA8500 user.info : [smbd] : samba started
Jan 7 14:54:13 EA8500 local5.info ksmbd: [ksmbd-manager/2597]: INFO: File '/tmp/ksmbd.lock' belongs to pid 2529
Jan 7 14:54:13 EA8500 local5.err ksmbd: [ksmbd-manager/2597]: ERROR: Failed to create lock file: File exists
Jan 7 14:54:13 EA8500 local5.info ksmbd: [ksmbd-manager/2597]: INFO: Exiting. Bye!
Jan 7 14:54:13 EA8500 user.info : [smbd] : samba started
Jan 7 14:54:13 EA8500 user.info wsdd2[2608]: starting.
Jan 7 14:54:13 EA8500 local5.info ksmbd: [ksmbd-manager/2615]: INFO: File '/tmp/ksmbd.lock' belongs to pid 2529
Jan 7 14:54:13 EA8500 local5.err ksmbd: [ksmbd-manager/2615]: ERROR: Failed to create lock file: File exists
Jan 7 14:54:13 EA8500 local5.info ksmbd: [ksmbd-manager/2615]: INFO: Exiting. Bye!
Jan 7 14:56:03 EA8500 daemon.info httpd[1590]: [httpd] : Authentication fail
Jan 7 14:56:03 EA8500 daemon.err httpd[1590]: [httpd] : Request Error Code 401: Authorization required. Wrong username and/or password!
Jan 7 14:58:13 EA8500 authpriv.info dropbear[2701]: Child connection from 10.72.28.4:47968
Jan 7 14:58:14 EA8500 authpriv.notice dropbear[2701]: Pubkey auth succeeded for 'root' with key md5 02:dd:6e:8e:c8:bb:bc:e9:23:24:92:0d:ea:2c:7b:17 from 10.72.28.4:47968
root@EA8500:~# date
Fri Jan 7 15:00:29 CST 2022
root@EA8500:~#
Connection to ea8500.mrjcd.com closed.
mrjcd@Deb:~$ neofetch
_,met$$$$$gg. mrjcd@Deb
,g$$$$$$$$$$$$$$$P. ---------
,g$$P" """Y$$.". OS: Debian GNU/Linux bookworm/sid x86_64
,$$P' `$$$. Host: CM1630
',$$P ,ggs. `$$b: Kernel: 5.15.0-2-amd64
`d$$' ,$P"' . $$$ Uptime: 1 day, 52 mins
$$P d$' , $$P Packages: 2413 (dpkg)
$$: $$. - ,d$$' Shell: bash 5.1.12
$$; Y$b._ _,d$P' Resolution: 1600x1200
Y$$. `.`"Y$$$$P"' DE: GNOME 41.2
`$$b "-.__ WM: Mutter
`Y$$ WM Theme: Adwaita
`Y$$. Theme: Adwaita [GTK2/3]
`$$b. Icons: gnome [GTK2/3]
`Y$$b. Terminal: gnome-terminal
`"Y$b._ CPU: AMD Athlon II X2 220 (2) @ 2.800GHz
`""" GPU: AMD ATI Radeon 3000
Memory: 2638MiB / 11723MiB
mrjcd@Deb:~$ date
Fri Jan 7 03:00:50 PM CST 2022
mrjcd@Deb:~$