mrjcd@Fat-Deb:~$ ssh root@citadel-station-homeworld.mrjcd.com
DD-WRT v3.0-r47146 std (c) 2021 NewMedia-NET GmbH
Release: 08/11/21
Board: Linksys EA8500
==========================================================
___ ___ _ _____ ______ ____ ___
/ _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \
/ // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // /
/____/____/ |__/|__/_/|_| /_/ |___/____(_)___/
DD-WRT v3.0
https://www.dd-wrt.com
==========================================================
BusyBox v1.33.1 (2021-08-11 00:42:53 +07) built-in shell (ash)
root@Citadel-Station-Homeworld:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux (LTO) version 4.9.279 (root@server2) (gcc version 10.0.1 (OpenWrt GCC 10.0.1 r12423-0493d57e04) ) #359 SMP Tue Aug 10 02:36:55 +07 2021
[ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt:Machine model: Linksys EA8500 WiFi Router
[ 0.000000] OF: fdt:Ignoring memory range 0x41500000 - 0x42000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 122880
[ 0.000000] free_area_init_node: node 0, pgdat c0a2eb40, node_mem_map ddc39000
[ 0.000000] Normal zone: 960 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 122880 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 12 pages/cpu s18956 r8192 d22004 u49152
[ 0.000000] pcpu-alloc: s18956 r8192 d22004 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920
[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:16
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 479264K/491520K available (5120K kernel code, 190K rwdata, 736K rodata, 1024K init, 395K bss, 12256K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xde800000 - 0xff800000 ( 528 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc0800000 (6112 kB)
[ 0.000000] .init : 0xc0900000 - 0xc0a00000 (1024 kB)
[ 0.000000] .data : 0xc0a00000 - 0xc0a2f818 ( 191 kB)
[ 0.000000] .bss : 0xc0a31000 - 0xc0a93ff1 ( 396 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[ 0.000008] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[ 0.000021] Switching to timer-based delay loop, resolution 160ns
[ 0.000247] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[ 0.000269] pid_max: default: 32768 minimum: 301
[ 0.000400] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000415] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.001090] CPU: Testing write buffer coherency: ok
[ 0.001406] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001457] Setting up static identity map for 0x42300000 - 0x4230003c
[ 0.004690] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.004885] Brought up 2 CPUs
[ 0.004906] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[ 0.004917] CPU: All CPU(s) started in SVC mode.
[ 0.018650] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.018680] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.018754] pinctrl core: initialized pinctrl subsystem
[ 0.019959] NET: Registered protocol family 16
[ 0.020016] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[ 0.020377] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.051774] cpuidle: using governor ladder
[ 0.104866] msm_bus_fabric_init_driver
[ 0.106242] pps_core: LinuxPPS API ver. 1 registered
[ 0.106255] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.106300] PTP clock support registered
[ 0.108720] clocksource: Switched to clocksource dg_timer
[ 0.113141] NET: Registered protocol family 2
[ 0.113324] IP idents hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.114288] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.114329] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.114383] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.114439] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.114465] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.114662] NET: Registered protocol family 1
[ 0.114716] PCI: CLS 0 bytes, default 64
[ 0.116168] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.126205] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.132606] cryptodev: driver 1.9 loaded.
[ 0.132646] io scheduler noop registered
[ 0.132662] io scheduler deadline registered (default)
[ 0.134566] 1b500000.pci supply vdda not found, using dummy regulator
[ 0.134676] 1b500000.pci supply vdda_phy not found, using dummy regulator
[ 0.134765] 1b500000.pci supply vdda_refclk not found, using dummy regulator
[ 0.135839] OF: PCI: host bridge /soc/pci@1b500000 ranges:
[ 0.135888] OF: PCI: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[ 0.135915] OF: PCI: MEM 0x08000000..0x0fdfffff -> 0x08000000
[ 0.239114] qcom-pcie 1b500000.pci: link up
[ 0.239310] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[ 0.239332] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.239351] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
[ 0.239366] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[ 0.239422] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.239589] pci 0000:00:00.0: supports D1
[ 0.239600] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.239915] PCI: bus0: Fast back to back transfers disabled
[ 0.240247] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.240496] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.241674] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.242266] PCI: bus1: Fast back to back transfers disabled
[ 0.242585] pci 0000:00:00.0: BAR 14: assigned [mem 0x08000000-0x081fffff]
[ 0.242611] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[ 0.242749] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.242772] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
[ 0.243212] aer 0000:00:00.0:pcie002: service driver aer loaded
[ 0.243717] 1b700000.pci supply vdda not found, using dummy regulator
[ 0.243832] 1b700000.pci supply vdda_phy not found, using dummy regulator
[ 0.243935] 1b700000.pci supply vdda_refclk not found, using dummy regulator
[ 0.244979] OF: PCI: host bridge /soc/pci@1b700000 ranges:
[ 0.245017] OF: PCI: IO 0x31e00000..0x31efffff -> 0x31e00000
[ 0.245043] OF: PCI: MEM 0x2e000000..0x31dfffff -> 0x2e000000
[ 0.349103] qcom-pcie 1b700000.pci: link up
[ 0.349290] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[ 0.349309] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.349324] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[ 0.349370] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.349505] pci 0001:00:00.0: supports D1
[ 0.349519] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[ 0.349794] PCI: bus0: Fast back to back transfers disabled
[ 0.350104] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.350333] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.351420] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.351994] PCI: bus1: Fast back to back transfers disabled
[ 0.352418] pci 0001:00:00.0: BAR 14: assigned [mem 0x2e000000-0x2e1fffff]
[ 0.352444] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[ 0.352568] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 0.352589] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
[ 0.352991] aer 0001:00:00.0:pcie002: service driver aer loaded
[ 0.353493] 1b900000.pci supply vdda not found, using dummy regulator
[ 0.353596] 1b900000.pci supply vdda_phy not found, using dummy regulator
[ 0.353683] 1b900000.pci supply vdda_refclk not found, using dummy regulator
[ 0.354750] OF: PCI: host bridge /soc/pci@1b900000 ranges:
[ 0.354790] OF: PCI: IO 0x35e00000..0x35efffff -> 0x35e00000
[ 0.354813] OF: PCI: MEM 0x32000000..0x35dfffff -> 0x32000000
[ 1.359096] qcom-pcie 1b900000.pci: phy link never came up
[ 1.360972] qcom-pcie 1b900000.pci: hostinit failed
[ 1.361775] deviceless supply s1b not found, using dummy regulator
[ 1.363502] L2 @ QSB rate. Forcing new rate.
[ 1.363669] L2 @ 800000 KHz
[ 1.363785] CPU0 @ 800000 KHz
[ 1.363795] CPU1 @ QSB rate. Forcing new rate.
[ 1.363922] CPU1 @ 800000 KHz
[ 1.366348] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[ 1.368153] serial8250_init
[ 1.368166] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 1.369421] msm_serial 16340000.serial: msm_serial: detected port #0
[ 1.369521] msm_serial 16340000.serial: uartclk = 7372800
[ 1.369596] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 201, base_baud = 460800) is a MSM
[ 1.369631] msm_serial: console setup on port #0
[ 2.116935] console [ttyMSM0] enabled
[ 2.121701] msm_serial: driver initialized
[ 2.127120] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
[ 2.129104] nand: AMD/Spansion S34MS01G2
[ 2.135527] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 2.139983] 19 ofpart partitions found on MTD device qcom_nand.0
[ 2.146814] Creating 19 MTD partitions on "qcom_nand.0":
[ 2.153077] 0x000000000000-0x000000040000 : "SBL1"
[ 2.159655] 0x000000040000-0x000000180000 : "MIBIB"
[ 2.165507] 0x000000180000-0x0000002c0000 : "SBL2"
[ 2.170285] 0x0000002c0000-0x000000540000 : "SBL3"
[ 2.173138] random: fast init done
[ 2.181074] 0x000000540000-0x000000660000 : "DDRCONFIG"
[ 2.183616] 0x000000660000-0x000000780000 : "SSD"
[ 2.188254] 0x000000780000-0x000000a00000 : "TZ"
[ 2.195214] 0x000000a00000-0x000000c80000 : "RPM"
[ 2.199884] 0x000000c80000-0x000000dc0000 : "art"
[ 2.202541] 0x000000dc0000-0x000000ec0000 : "APPSBL"
[ 2.206898] 0x000000ec0000-0x000000f00000 : "u_env"
[ 2.210932] 0x000000f00000-0x000000f40000 : "s_env"
[ 2.215467] 0x000000f40000-0x000000f80000 : "devinfo"
[ 2.220407] 0x000000f80000-0x000003780000 : "linux"
[ 2.283075] 0x000001280000-0x000003780000 : "rootfs"
[ 2.337701] mtd: partition "rootfs" set to be root filesystem
[ 2.337733] 0x000003780000-0x000005f40000 : "linux2"
[ 2.400709] 0x000003a80000-0x000005f40000 : "rootfs2"
[ 2.454713] 0x000005f40000-0x000005f80000 : "nvram"
[ 2.456003] 0x000005f80000-0x000008000000 : "ddwrt"
[ 2.481818] random: crng init done
[ 2.507446] libphy: GPIO Bitbanged MDIO: probed
[ 2.510933] libphy: Fixed MDIO Bus: probed
[ 2.533006] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
[ 3.363969] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 3.363993] Ring mode enabled
[ 3.367990] DMA HW capability register supported
[ 3.371031] Enhanced/Alternate descriptors
[ 3.376585] Enabled extended descriptors
[ 3.379610] RX Checksum Offload Engine supported
[ 3.383711] COE Type 2
[ 3.388393] TX Checksum insertion supported
[ 3.390729] Wake-Up On Lan supported
[ 3.395173] eth%d: device MAC address 00:06:3b:01:41:00
[ 3.398729] Enable RX Mitigation via HW Watchdog Timer
[ 3.405219] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 3.409053] Ring mode enabled
[ 3.414178] DMA HW capability register supported
[ 3.417131] Enhanced/Alternate descriptors
[ 3.422772] Enabled extended descriptors
[ 3.425730] RX Checksum Offload Engine supported
[ 3.429968] COE Type 2
[ 3.434580] TX Checksum insertion supported
[ 3.436840] Wake-Up On Lan supported
[ 3.441435] eth%d: device MAC address 00:03:7f:ba:db:02
[ 3.444915] Enable RX Mitigation via HW Watchdog Timer
[ 3.450934] i2c /dev entries driver
[ 3.455873] Calibration not found.
[ 3.459926] CPUidle arm: CPU 0 failed to init idle CPU ops
[ 3.462613] GACT probability NOT on
[ 3.467581] Mirror/redirect action on
[ 3.471046] Simple TC action Loaded
[ 3.475381] netem: version 1.3
[ 3.478100] u32 classifier
[ 3.481265] Performance counters on
[ 3.483889] input device check on
[ 3.487620] Actions configured
[ 3.491517] Netfilter messages via NETLINK v0.30.
[ 3.495136] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 3.500209] nf_conntrack_rtsp v0.7 loading
[ 3.505804] xt_time: kernel timezone is -0000
[ 3.509582] ip_set: protocol 6
[ 3.514194] gre: GRE over IPv4 demultiplexor driver
[ 3.517365] nf_nat_rtsp v0.7 loading
[ 3.521764] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.525720] NET: Registered protocol family 17
[ 3.530936] Bridge firewalling registered
[ 3.535022] 8021q: 802.1Q VLAN Support v1.8
[ 3.541530] Registering SWP/SWPB emulation handler
[ 3.543450] registered taskstats version 1
[ 3.558082] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
[ 3.577087] s1a: Bringing 0uV into 1050000-1050000uV
[ 3.577394] s1b: Bringing 0uV into 1050000-1050000uV
[ 3.581429] s2a: Bringing 0uV into 800000-800000uV
[ 3.586320] s2b: Bringing 0uV into 800000-800000uV
[ 3.595404] trying to register driver cpufreq-dt
[ 3.597213] searching for nvram
[ 3.600340] nvram size = 262144
[ 3.695650] found nvram at 20000
[ 3.746520] no valid UBI magic found inside mtd13
[ 3.746584] hctosys: unable to open rtc device (rtc0)
[ 3.758016] VFS: Mounted root (squashfs filesystem) readonly on device 31:16.
[ 3.759766] Freeing unused kernel memory: 1024K
[ 7.558740] Loading modules backported from Linux version v5.10-rc6-0-gb65054597872
[ 7.558772] Backport generated by backports.git v5.10-rc6-1-0-g3a9d70a3
[ 8.069380] ath9k: ath9k: Driver unloaded
[ 8.414080] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 8.414779] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 8.580575] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[ 8.892425] ath10k_pci 0000:01:00.0: found firmware features ie (8 B)
[ 8.892465] ath10k_pci 0000:01:00.0: Unknown FW IE: 30
[ 8.897859] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
[ 8.902975] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[ 8.915197] ath10k_pci 0000:01:00.0: firmware ver 10.4-ddwrt-9980-tW-13-6284M api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate crc32 037de748
[ 8.972573] ath10k_pci 0000:01:00.0: boot get otp board id result 0x00008800 board_id 2 chip_id 1 ext_bid_support 0
[ 8.972613] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=2'
[ 8.981888] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=2'
[ 9.012501] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:2 crc32 792a3d38
[ 9.033662] ath10k_pci 0000:01:00.0: boot already acquired valid otp board id,skip download, board_id 2 chip_id 1
[ 9.054246] ath10k_pci 0000:01:00.0: boot upload otp to 0x1234 len 9477
[ 10.108822] ath10k_pci 0000:01:00.0: Init Max Stations to 64
[ 10.181506] ath10k_pci 0000:01:00.0: wmi debug print truncated: 128
[ 10.181550] ath10k_pci 0000:01:00.0: ChipType 1200 ChipTypeID 0 BoardID 1 P 80/80 V 16 K 160 PH 272 T 282 msdu-desc: 2500 sw-crypt: 0 c
[ 10.186792] ath10k_pci 0000:01:00.0: free: 24820 iram: 34016 sram: 18196
[ 10.199202] ath10k_pci 0000:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr c0:56:27:06:39:fd status 0
[ 10.239311] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 64 raw 0 hwcrypto 1
[ 10.362007] ath: EEPROM regdomain sanitized
[ 10.362019] ath: EEPROM regdomain: 0x64
[ 10.362026] ath: EEPROM indicates we should expect a direct regpair map
[ 10.362043] ath: Country alpha2 being used: 00
[ 10.362050] ath: Regpair used: 0x64
[ 10.362117] initialize fq_codel with 33554432 bytes memory limit
[ 10.362359] ieee80211_txq_setup_flows: set limit to 4194304 bytes
[ 10.373164] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[ 10.373930] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 10.540405] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[ 10.540472] ath10k_pci 0001:01:00.0: found firmware features ie (8 B)
[ 10.550099] ath10k_pci 0001:01:00.0: Unknown FW IE: 30
[ 10.556524] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
[ 10.561651] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[ 10.574807] ath10k_pci 0001:01:00.0: firmware ver 10.4-ddwrt-9980-tW-13-6284M api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate crc32 037de748
[ 10.631070] ath10k_pci 0001:01:00.0: boot get otp board id result 0x00008400 board_id 1 chip_id 1 ext_bid_support 0
[ 10.631116] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=1'
[ 10.640393] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=1'
[ 10.650420] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:1 crc32 792a3d38
[ 10.679193] ath10k_pci 0001:01:00.0: boot already acquired valid otp board id,skip download, board_id 1 chip_id 1
[ 10.699662] ath10k_pci 0001:01:00.0: boot upload otp to 0x1234 len 9477
[ 11.750489] ath10k_pci 0001:01:00.0: Init Max Stations to 64
[ 11.820993] ath10k_pci 0001:01:00.0: wmi debug print truncated: 128
[ 11.821020] ath10k_pci 0001:01:00.0: ChipType 1200 ChipTypeID 0 BoardID 2 P 80/80 V 16 K 160 PH 272 T 282 msdu-desc: 2500 sw-crypt: 0 c
[ 11.826144] ath10k_pci 0001:01:00.0: free: 24820 iram: 34016 sram: 18196
[ 11.838626] ath10k_pci 0001:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr c0:56:27:06:39:fd status 0
[ 11.875560] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 64 raw 0 hwcrypto 1
[ 11.979517] ath: EEPROM regdomain sanitized
[ 11.979526] ath: EEPROM regdomain: 0x64
[ 11.979532] ath: EEPROM indicates we should expect a direct regpair map
[ 11.979546] ath: Country alpha2 being used: 00
[ 11.979550] ath: Regpair used: 0x64
[ 11.979608] initialize fq_codel with 33554432 bytes memory limit
[ 11.979768] ieee80211_txq_setup_flows: set limit to 33554432 bytes
[ 13.092498] dwmac1000: Master AXI performs any burst length
[ 13.092569] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 13.097168] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[ 13.202583] dwmac1000: Master AXI performs any burst length
[ 13.202623] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 13.207081] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 14.169134] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 15.266690] device br0 entered promiscuous mode
[ 15.333775] br0: port 1(vlan1) entered blocking state
[ 15.336147] br0: port 1(vlan1) entered disabled state
[ 15.341537] device vlan1 entered promiscuous mode
[ 15.346214] device eth0 entered promiscuous mode
[ 15.351045] br0: port 1(vlan1) entered blocking state
[ 15.355591] br0: port 1(vlan1) entered forwarding state
[ 15.367448] device br0 left promiscuous mode
[ 15.371107] device br0 entered promiscuous mode
[ 15.460042] device br0 left promiscuous mode
[ 15.518747] ath: EEPROM regdomain: 0x8348
[ 15.518753] ath: EEPROM indicates we should expect a country code
[ 15.518760] ath: doing EEPROM country->regdmn map search
[ 15.518766] ath: country maps to regdmn code: 0x3a
[ 15.518770] ath: Country alpha2 being used: US
[ 15.518775] ath: Regpair used: 0x3a
[ 15.518779] ath: regdomain 0x8348 dynamically updated by user
[ 15.518798] ath: EEPROM regdomain: 0x8348
[ 15.518801] ath: EEPROM indicates we should expect a country code
[ 15.518807] ath: doing EEPROM country->regdmn map search
[ 15.518814] ath: country maps to regdmn code: 0x3a
[ 15.518817] ath: Country alpha2 being used: US
[ 15.518820] ath: Regpair used: 0x3a
[ 15.518823] ath: regdomain 0x8348 dynamically updated by user
[ 15.527994] ath10k_pci 0000:01:00.0: user requested fw restart
[ 15.639414] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0-vanilla/firmware-6.bin failed with error -2
[ 15.869421] ath10k_pci 0000:01:00.0: found firmware features ie (4 B)
[ 15.869458] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
[ 15.874863] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[ 15.886448] ath10k_pci 0000:01:00.0: firmware ver 3.15-00018 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps,peer-fixed-rate crc32 663fd9e8
[ 15.950426] ath10k_pci 0000:01:00.0: boot get otp board id result 0x00008800 board_id 2 chip_id 1 ext_bid_support 0
[ 15.950458] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=2'
[ 15.959741] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=2'
[ 15.969278] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:2 crc32 792a3d38
[ 15.998633] ath10k_pci 0000:01:00.0: boot already acquired valid otp board id,skip download, board_id 2 chip_id 1
[ 16.019188] ath10k_pci 0000:01:00.0: boot upload otp to 0x1234 len 11241
[ 17.166665] ath10k_pci 0000:01:00.0: Init Max Stations to 512
[ 17.241312] ath10k_pci 0000:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr c0:56:27:06:39:fd status 0
[ 17.271481] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[ 17.429249] ath10k_pci 0000:01:00.0: Core CLK 300
[ 17.429275] ath10k_pci 0000:01:00.0: Mac CLK 150
[ 18.132697] ath10k_pci 0000:01:00.0: boot get otp board id result 0x00008800 board_id 2 chip_id 1 ext_bid_support 0
[ 18.153264] ath10k_pci 0000:01:00.0: boot upload otp to 0x1234 len 11241
[ 19.300605] ath10k_pci 0000:01:00.0: Init Max Stations to 512
[ 19.372932] ath10k_pci 0000:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr c0:56:27:06:39:fd status 0
[ 19.535821] ath10k_pci 0000:01:00.0: bdf failsafe status event received from fw: 0
[ 19.539442] br0: port 2(wlan0) entered blocking state
[ 19.542273] br0: port 2(wlan0) entered disabled state
[ 19.547610] device wlan0 entered promiscuous mode
[ 21.745126] br0: port 2(wlan0) entered blocking state
[ 21.745152] br0: port 2(wlan0) entered forwarding state
[ 21.755362] br1: port 1(wlan0.1) entered blocking state
[ 21.755382] br1: port 1(wlan0.1) entered disabled state
[ 21.759717] device wlan0.1 entered promiscuous mode
[ 21.770692] br1: port 1(wlan0.1) entered blocking state
[ 21.860219] ath10k_pci 0001:01:00.0: user requested fw restart
[ 21.944421] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0-vanilla/firmware-6.bin failed with error -2
[ 21.944463] ath10k_pci 0001:01:00.0: found firmware features ie (4 B)
[ 21.954803] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
[ 21.961288] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[ 21.972737] ath10k_pci 0001:01:00.0: firmware ver 3.15-00018 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps,peer-fixed-rate crc32 663fd9e8
[ 22.036559] ath10k_pci 0001:01:00.0: boot get otp board id result 0x00008400 board_id 1 chip_id 1 ext_bid_support 0
[ 22.036591] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=1'
[ 22.045854] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=1'
[ 22.055384] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:1 crc32 792a3d38
[ 22.084656] ath10k_pci 0001:01:00.0: boot already acquired valid otp board id,skip download, board_id 1 chip_id 1
[ 22.105095] ath10k_pci 0001:01:00.0: boot upload otp to 0x1234 len 11241
[ 23.248680] ath10k_pci 0001:01:00.0: Init Max Stations to 512
[ 23.321073] ath10k_pci 0001:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr c0:56:27:06:39:fd status 0
[ 23.350702] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[ 23.497944] ath10k_pci 0001:01:00.0: Core CLK 300
[ 23.497967] ath10k_pci 0001:01:00.0: Mac CLK 150
[ 23.668118] ath10k_pci 0001:01:00.0: boot get otp board id result 0x00008400 board_id 1 chip_id 1 ext_bid_support 0
[ 23.688567] ath10k_pci 0001:01:00.0: boot upload otp to 0x1234 len 11241
[ 24.832023] ath10k_pci 0001:01:00.0: Init Max Stations to 512
[ 24.902946] ath10k_pci 0001:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr c0:56:27:06:39:fd status 0
[ 25.020056] ath10k_pci 0001:01:00.0: bdf failsafe status event received from fw: 0
[ 25.023413] br0: port 3(wlan1) entered blocking state
[ 25.026525] br0: port 3(wlan1) entered disabled state
[ 25.031935] device wlan1 entered promiscuous mode
[ 25.695211] br0: port 3(wlan1) entered blocking state
[ 25.695234] br0: port 3(wlan1) entered forwarding state
[ 26.184286] device vlan2 entered promiscuous mode
[ 27.369497] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 27.500388] Linux kernel CIFS/SMB SERVER 3.4.0 by Namjae Jeon <linkinjeon@kernel.org>
[ 27.767353] IMQ: use 2 as queue number
[ 27.778178] IMQ driver loaded successfully. (numdevs = 16, numqueues = 2, imq_dev_accurate_stats = 1)
[ 27.778207] Hooking IMQ after NAT on PREROUTING.
[ 27.786557] Hooking IMQ before NAT on POSTROUTING.
[ 28.565200] ndpi_net_init:ns0 OK
[ 28.565677] xt_ndpi v1.2 ndpi 2.8.0-1522-b353209 IPv6=YES debug_message=no
[ 28.565677] BT: hash_size 2k, hash_expiation 1200 sec, log_size 128kb
[ 28.565677] sizeof hash_ip4p_node=32 id_struct=280 PATRICIA_MAXBITS=128
[ 28.565677] flow_struct=1400 packet_struct=728
[ 28.565677] flow_tcp_struct=42 flow_udp_struct=36 int_one_line_struct=8
[ 28.565677] ndpi_ip_addr_t=16 ndpi_protocol=8 nf_ct_ext_ndpi=152
[ 28.565677] flow_info=112 spinlock_t=4
[ 28.565677] NF_EXT_ID 8
[ 28.589334] xt_ndpi: MAX_PROTOCOLS 320 LAST_PROTOCOL 245
[ 28.611541] xt_ndpi: flow acctounting OFF
[ 28.960317] device vlan2 left promiscuous mode
[ 29.160556] usbcore: registered new interface driver usbfs
[ 29.160671] usbcore: registered new interface driver hub
[ 29.165011] usbcore: registered new device driver usb
[ 29.216021] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 29.259486] ehci-platform: EHCI generic platform driver
[ 29.283144] ehci-pci: EHCI PCI platform driver
[ 29.435434] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 29.599208] IMQ driver unloaded successfully.
[ 29.939508] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 29.939600] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 29.944089] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 29.951574] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
[ 29.962068] hub 1-0:1.0: USB hub found
[ 29.969290] hub 1-0:1.0: 1 port detected
[ 29.970294] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 29.974029] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 29.982075] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 29.991812] hub 2-0:1.0: USB hub found
[ 30.008529] hub 2-0:1.0: 1 port detected
[ 30.097631] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 30.097702] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 30.102251] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 30.109736] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
[ 30.120052] hub 3-0:1.0: USB hub found
[ 30.125999] hub 3-0:1.0: 1 port detected
[ 30.134776] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 30.134820] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 30.140191] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 30.147783] hub 4-0:1.0: USB hub found
[ 30.162800] hub 4-0:1.0: 1 port detected
[ 30.408941] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 30.533302] tun: Universal TUN/TAP device driver, 1.6
[ 30.533327] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 32.018611] IMQ: use 2 as queue number
[ 32.027572] IMQ driver loaded successfully. (numdevs = 16, numqueues = 2, imq_dev_accurate_stats = 1)
[ 32.027599] Hooking IMQ after NAT on PREROUTING.
[ 32.035896] Hooking IMQ before NAT on POSTROUTING.
[ 33.569307] IMQ driver unloaded successfully.
[ 35.205872] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 35.205910] usb usb4: USB disconnect, device number 1
[ 35.211871] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered
[ 35.215455] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 35.220770] usb usb3: USB disconnect, device number 1
[ 35.225609] usb 3-1: USB disconnect, device number 2
[ 35.243227] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered
[ 35.244467] xhci-hcd xhci-hcd.0.auto: remove, state 1
[ 35.247969] usb usb2: USB disconnect, device number 1
[ 35.261788] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
[ 35.261988] xhci-hcd xhci-hcd.0.auto: remove, state 1
[ 35.266528] usb usb1: USB disconnect, device number 1
[ 35.273523] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
[ 35.327386] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 35.327485] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 35.332063] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 35.339461] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
[ 35.349073] hub 1-0:1.0: USB hub found
[ 35.354521] hub 1-0:1.0: 1 port detected
[ 35.363118] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 35.365985] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 35.371710] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 35.380168] hub 2-0:1.0: USB hub found
[ 35.389391] hub 2-0:1.0: 1 port detected
[ 35.395738] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 35.398921] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 35.404437] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 35.404464] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
[ 35.413253] hub 3-0:1.0: USB hub found
[ 35.413720] hub 3-0:1.0: 1 port detected
[ 35.414048] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 35.414070] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 35.414318] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 35.415364] hub 4-0:1.0: USB hub found
[ 35.415763] hub 4-0:1.0: 1 port detected
[ 35.502044] SCSI subsystem initialized
[ 35.636059] usbcore: registered new interface driver usb-storage
[ 35.699714] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 35.703562] libata version 3.00 loaded.
[ 35.790808] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
[ 35.790857] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 35.795190] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
[ 35.806275] scsi host0: ahci
[ 35.812408] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 95
[ 35.860855] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 35.866133] usb-storage 3-1:1.0: Quirks match for vid 090c pid 1000: 400
[ 35.866236] scsi host1: usb-storage 3-1:1.0
[ 36.105130] IMQ: use 2 as queue number
[ 36.113996] IMQ driver loaded successfully. (numdevs = 16, numqueues = 2, imq_dev_accurate_stats = 1)
[ 36.114023] Hooking IMQ after NAT on PREROUTING.
[ 36.122252] Hooking IMQ before NAT on POSTROUTING.
[ 36.139280] ata1: SATA link down (SStatus 0 SControl 300)
[ 36.419828] sdhci: Secure Digital Host Controller Interface driver
[ 36.419853] sdhci: Copyright(c) Pierre Ossman
[ 36.432902] sdhci-pltfm: SDHCI platform and OF driver helper
[ 36.995001] br1: port 2(vlan4) entered blocking state
[ 36.995031] br1: port 2(vlan4) entered disabled state
[ 36.999436] device vlan4 entered promiscuous mode
[ 37.004180] br1: port 2(vlan4) entered blocking state
[ 37.005416] br1: port 2(vlan4) entered blocking state
[ 37.169795] scsi 1:0:0:0: Direct-Access Samsung Flash Drive 1100 PQ: 0 ANSI: 6
[ 37.175971] sd 1:0:0:0: [sda] 62656641 512-byte logical blocks: (32.1 GB/29.9 GiB)
[ 37.183296] sd 1:0:0:0: [sda] Write Protect is off
[ 37.190255] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 37.190518] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 37.569149] sda: sda1
[ 37.570933] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 37.647160] ksmbd: kill command received
[ 39.213752] EXT4-fs (sda1): Ignoring removed nobh option
[ 39.217318] EXT4-fs (sda1): barriers disabled
[ 39.224479] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: init_itable=0,nobarrier,nobh,barrier=0
[ 39.555631] Linux kernel CIFS/SMB SERVER 3.4.0 by Namjae Jeon <linkinjeon@kernel.org>
[ 41.720285] br1: port 1(wlan0.1) entered learning state
[ 56.719485] br1: port 1(wlan0.1) entered forwarding state
[ 56.719731] br1: port 2(vlan4) entered learning state
[ 71.719470] br1: port 2(vlan4) entered forwarding state
[ 7508.990901] ksmbd: Unsupported addition info: 0xf)
[ 7511.756681] ksmbd: Unsupported addition info: 0x20)
[ 7518.849531] ksmbd: Unsupported addition info: 0xf)
[ 7519.482652] ksmbd: Unsupported addition info: 0x20)
[ 7529.915642] ksmbd: Unsupported addition info: 0xf)
[ 7533.307447] ksmbd: Unsupported addition info: 0xf)
[ 7534.452361] ksmbd: Unsupported addition info: 0xf)
[ 7536.767750] ksmbd: Unsupported addition info: 0x20)
[ 7540.199849] ksmbd: Unsupported addition info: 0xf)
[ 7542.545350] ksmbd: Unsupported addition info: 0x20)
[ 7544.433074] ksmbd: Unsupported addition info: 0xf)
[ 7547.086193] ksmbd: Unsupported addition info: 0x20)
[ 7565.639378] ksmbd: Unsupported addition info: 0xf)
[ 7565.729253] ksmbd: Unsupported addition info: 0x20)
[ 7565.921660] ksmbd: Unsupported addition info: 0xf)
[ 7565.951536] ksmbd: Unsupported addition info: 0x20)
[ 7565.971945] ksmbd: Unsupported addition info: 0xf)
[ 7568.339847] ksmbd: Unsupported addition info: 0x20)
[ 7570.143582] ksmbd: Unsupported addition info: 0xf)
[ 7570.249965] ksmbd: Unsupported addition info: 0x20)
[ 7571.263334] ksmbd: Unsupported addition info: 0xf)
[ 7571.323018] ksmbd: Unsupported addition info: 0x20)
[ 7571.370890] ksmbd: Unsupported addition info: 0xf)
[ 7571.401920] ksmbd: Unsupported addition info: 0x20)
[ 7571.435153] ksmbd: Unsupported addition info: 0xf)
[ 7571.471818] ksmbd: Unsupported addition info: 0x20)
[ 7571.499496] ksmbd: Unsupported addition info: 0xf)
[ 7571.604971] ksmbd: Unsupported addition info: 0x20)
[ 7572.340399] ksmbd: Unsupported addition info: 0xf)
[ 7572.341887] ksmbd: Unsupported addition info: 0x20)
[ 7572.443313] ksmbd: Unsupported addition info: 0xf)
[ 7572.482802] ksmbd: Unsupported addition info: 0x20)
[ 7572.513596] ksmbd: Unsupported addition info: 0xf)
[ 7572.562763] ksmbd: Unsupported addition info: 0x20)
[ 7572.603932] ksmbd: Unsupported addition info: 0xf)
[ 7572.710958] ksmbd: Unsupported addition info: 0x20)
[ 7573.518670] ksmbd: Unsupported addition info: 0xf)
[ 7573.550182] ksmbd: Unsupported addition info: 0x20)
[ 7573.575742] ksmbd: Unsupported addition info: 0xf)
[ 7573.617852] ksmbd: Unsupported addition info: 0x20)
[ 7573.650265] ksmbd: Unsupported addition info: 0xf)
[ 7573.755485] ksmbd: Unsupported addition info: 0x20)
[ 7849.725633] ksmbd: Unsupported addition info: 0xf)
[ 7849.738200] ksmbd: Unsupported addition info: 0x20)
[ 7849.748663] ksmbd: Unsupported addition info: 0xf)
[ 7849.750349] ksmbd: Unsupported addition info: 0x20)
[ 7850.721346] ksmbd: Unsupported addition info: 0xf)
[ 7850.722859] ksmbd: Unsupported addition info: 0x20)
[ 7851.695842] ksmbd: Unsupported addition info: 0xf)
[ 7851.697453] ksmbd: Unsupported addition info: 0x20)
[ 7852.824185] ksmbd: Unsupported addition info: 0xf)
[ 7852.825854] ksmbd: Unsupported addition info: 0x20)
[ 7853.743089] ksmbd: Unsupported addition info: 0xf)
[ 7853.744557] ksmbd: Unsupported addition info: 0x20)
[ 7854.675359] ksmbd: Unsupported addition info: 0xf)
[ 7854.677017] ksmbd: Unsupported addition info: 0x20)
[ 7855.680748] ksmbd: Unsupported addition info: 0xf)
[ 7855.682736] ksmbd: Unsupported addition info: 0x20)
[ 7856.870455] ksmbd: Unsupported addition info: 0xf)
[ 7856.871940] ksmbd: Unsupported addition info: 0x20)
[ 7858.003006] ksmbd: Unsupported addition info: 0xf)
[ 7858.004540] ksmbd: Unsupported addition info: 0x20)
[ 7859.095777] ksmbd: Unsupported addition info: 0xf)
[ 7859.097248] ksmbd: Unsupported addition info: 0x20)
[ 7859.881390] ksmbd: Unsupported addition info: 0xf)
[ 7859.882930] ksmbd: Unsupported addition info: 0x20)
[ 7860.827220] ksmbd: Unsupported addition info: 0xf)
[ 7860.828708] ksmbd: Unsupported addition info: 0x20)
[ 7862.223200] ksmbd: Unsupported addition info: 0xf)
[ 7862.225057] ksmbd: Unsupported addition info: 0x20)
[ 7863.517791] ksmbd: Unsupported addition info: 0xf)
[ 7863.519385] ksmbd: Unsupported addition info: 0x20)
[ 7864.682757] ksmbd: Unsupported addition info: 0xf)
[ 7864.684278] ksmbd: Unsupported addition info: 0x20)
[ 7865.619905] ksmbd: Unsupported addition info: 0xf)
[ 7865.621524] ksmbd: Unsupported addition info: 0x20)
[ 7866.541589] ksmbd: Unsupported addition info: 0xf)
[ 7866.544294] ksmbd: Unsupported addition info: 0x20)
[ 7867.771201] ksmbd: Unsupported addition info: 0xf)
[ 7867.772675] ksmbd: Unsupported addition info: 0x20)
[ 7868.609127] ksmbd: Unsupported addition info: 0xf)
[ 7868.610602] ksmbd: Unsupported addition info: 0x20)
[ 7870.001812] ksmbd: Unsupported addition info: 0xf)
[ 7870.004019] ksmbd: Unsupported addition info: 0x20)
[ 7871.084113] ksmbd: Unsupported addition info: 0xf)
[ 7871.085527] ksmbd: Unsupported addition info: 0x20)
[ 7871.896543] ksmbd: Unsupported addition info: 0xf)
[ 7871.898335] ksmbd: Unsupported addition info: 0x20)
[ 7872.631157] ksmbd: Unsupported addition info: 0xf)
[ 7872.632671] ksmbd: Unsupported addition info: 0x20)
[ 7873.905527] ksmbd: Unsupported addition info: 0xf)
[ 7873.906975] ksmbd: Unsupported addition info: 0x20)
[ 7875.072631] ksmbd: Unsupported addition info: 0xf)
[ 7875.074138] ksmbd: Unsupported addition info: 0x20)
[ 7876.443699] ksmbd: Unsupported addition info: 0xf)
[ 7876.445498] ksmbd: Unsupported addition info: 0x20)
[ 7877.681700] ksmbd: Unsupported addition info: 0xf)
[ 7877.683174] ksmbd: Unsupported addition info: 0x20)
[ 7878.593967] ksmbd: Unsupported addition info: 0xf)
[ 7878.595706] ksmbd: Unsupported addition info: 0x20)
[ 7879.464344] ksmbd: Unsupported addition info: 0xf)
[ 7879.465812] ksmbd: Unsupported addition info: 0x20)
[ 7886.582854] ksmbd: Unsupported addition info: 0xf)
[ 7886.584518] ksmbd: Unsupported addition info: 0x20)
[ 7887.315951] ksmbd: Unsupported addition info: 0xf)
[ 7887.320680] ksmbd: Unsupported addition info: 0x20)
[ 7888.600711] ksmbd: Unsupported addition info: 0xf)
[ 7888.602057] ksmbd: Unsupported addition info: 0x20)
[ 7889.382963] ksmbd: Unsupported addition info: 0xf)
[ 7889.384431] ksmbd: Unsupported addition info: 0x20)
[ 7890.364112] ksmbd: Unsupported addition info: 0xf)
[ 7890.365596] ksmbd: Unsupported addition info: 0x20)
[ 7891.305997] ksmbd: Unsupported addition info: 0xf)
[ 7891.307488] ksmbd: Unsupported addition info: 0x20)
[ 7892.181482] ksmbd: Unsupported addition info: 0xf)
[ 7892.182935] ksmbd: Unsupported addition info: 0x20)
[ 7893.096956] ksmbd: Unsupported addition info: 0xf)
[ 7893.098458] ksmbd: Unsupported addition info: 0x20)
[ 7894.250530] ksmbd: Unsupported addition info: 0xf)
[ 7894.252302] ksmbd: Unsupported addition info: 0x20)
[ 7895.271818] ksmbd: Unsupported addition info: 0xf)
[ 7895.273295] ksmbd: Unsupported addition info: 0x20)
[ 7896.404819] ksmbd: Unsupported addition info: 0xf)
[ 7896.406298] ksmbd: Unsupported addition info: 0x20)
[ 7897.504342] ksmbd: Unsupported addition info: 0xf)
[ 7897.505714] ksmbd: Unsupported addition info: 0x20)
[ 7898.357111] ksmbd: Unsupported addition info: 0xf)
[ 7898.358577] ksmbd: Unsupported addition info: 0x20)
[ 7899.349035] ksmbd: Unsupported addition info: 0xf)
[ 7899.350534] ksmbd: Unsupported addition info: 0x20)
[ 7900.379277] ksmbd: Unsupported addition info: 0xf)
[ 7900.380580] ksmbd: Unsupported addition info: 0x20)
[ 7901.232755] ksmbd: Unsupported addition info: 0xf)
[ 7901.234218] ksmbd: Unsupported addition info: 0x20)
[ 7902.112527] ksmbd: Unsupported addition info: 0xf)
[ 7902.114013] ksmbd: Unsupported addition info: 0x20)
[ 7903.225312] ksmbd: Unsupported addition info: 0xf)
[ 7903.226788] ksmbd: Unsupported addition info: 0x20)
[ 7904.145958] ksmbd: Unsupported addition info: 0xf)
[ 7904.147445] ksmbd: Unsupported addition info: 0x20)
[ 7905.142656] ksmbd: Unsupported addition info: 0xf)
[ 7905.144133] ksmbd: Unsupported addition info: 0x20)
[ 7906.080993] ksmbd: Unsupported addition info: 0xf)
[ 7906.082396] ksmbd: Unsupported addition info: 0x20)
[ 7906.864678] ksmbd: Unsupported addition info: 0xf)
[ 7906.866163] ksmbd: Unsupported addition info: 0x20)
[ 7908.017473] ksmbd: Unsupported addition info: 0xf)
[ 7908.019326] ksmbd: Unsupported addition info: 0x20)
[ 7909.270620] ksmbd: Unsupported addition info: 0xf)
[ 7909.272084] ksmbd: Unsupported addition info: 0x20)
[ 7910.648159] ksmbd: Unsupported addition info: 0xf)
[ 7910.649666] ksmbd: Unsupported addition info: 0x20)
[ 7911.647155] ksmbd: Unsupported addition info: 0xf)
[ 7911.648604] ksmbd: Unsupported addition info: 0x20)
[ 7912.825030] ksmbd: Unsupported addition info: 0xf)
[ 7912.826505] ksmbd: Unsupported addition info: 0x20)
[ 7913.857117] ksmbd: Unsupported addition info: 0xf)
[ 7913.858561] ksmbd: Unsupported addition info: 0x20)
[ 7914.796516] ksmbd: Unsupported addition info: 0xf)
[ 7914.797990] ksmbd: Unsupported addition info: 0x20)
[ 7915.745470] ksmbd: Unsupported addition info: 0xf)
[ 7915.747338] ksmbd: Unsupported addition info: 0x20)
[ 7916.760765] ksmbd: Unsupported addition info: 0xf)
[ 7916.762761] ksmbd: Unsupported addition info: 0x20)
[ 7918.047534] ksmbd: Unsupported addition info: 0xf)
[ 7918.048970] ksmbd: Unsupported addition info: 0x20)
[ 7919.022677] ksmbd: Unsupported addition info: 0xf)
[ 7919.024120] ksmbd: Unsupported addition info: 0x20)
[ 7919.980183] ksmbd: Unsupported addition info: 0xf)
[ 7919.981632] ksmbd: Unsupported addition info: 0x20)
[ 7920.896258] ksmbd: Unsupported addition info: 0xf)
[ 7920.897829] ksmbd: Unsupported addition info: 0x20)
[ 7921.929624] ksmbd: Unsupported addition info: 0xf)
[ 7921.931104] ksmbd: Unsupported addition info: 0x20)
[ 7922.916462] ksmbd: Unsupported addition info: 0xf)
[ 7922.918022] ksmbd: Unsupported addition info: 0x20)
[ 7924.247518] ksmbd: Unsupported addition info: 0xf)
[ 7924.249192] ksmbd: Unsupported addition info: 0x20)
[ 7925.098216] ksmbd: Unsupported addition info: 0xf)
[ 7925.099768] ksmbd: Unsupported addition info: 0x20)
[ 7926.098805] ksmbd: Unsupported addition info: 0xf)
[ 7926.100460] ksmbd: Unsupported addition info: 0x20)
[ 7927.087497] ksmbd: Unsupported addition info: 0xf)
[ 7927.089192] ksmbd: Unsupported addition info: 0x20)
[ 7928.200386] ksmbd: Unsupported addition info: 0xf)
[ 7928.201890] ksmbd: Unsupported addition info: 0x20)
[ 7929.163380] ksmbd: Unsupported addition info: 0xf)
[ 7929.164838] ksmbd: Unsupported addition info: 0x20)
[ 7930.396228] ksmbd: Unsupported addition info: 0xf)
[ 7930.397645] ksmbd: Unsupported addition info: 0x20)
[ 7931.188800] ksmbd: Unsupported addition info: 0xf)
[ 7931.190411] ksmbd: Unsupported addition info: 0x20)
[ 7932.080230] ksmbd: Unsupported addition info: 0xf)
[ 7932.081730] ksmbd: Unsupported addition info: 0x20)
[ 7933.150720] ksmbd: Unsupported addition info: 0xf)
[ 7933.152251] ksmbd: Unsupported addition info: 0x20)
[ 7934.108736] ksmbd: Unsupported addition info: 0xf)
[ 7934.110623] ksmbd: Unsupported addition info: 0x20)
[ 8072.625984] ksmbd: Unsupported addition info: 0xf)
[ 8073.790541] ksmbd: Unsupported addition info: 0xf)
root@Citadel-Station-Homeworld:~# uptime
08:18:17 up 10:30, load average: 0.05, 0.05, 0.01
root@Citadel-Station-Homeworld:~# date
Thu Aug 12 08:18:19 CDT 2021
root@Citadel-Station-Homeworld:~#
Connection to citadel-station-homeworld.mrjcd.com closed.
mrjcd@Fat-Deb:~$