EDIT:
fixed with r44534 ---> 'https://svn.dd-wrt.com/changeset/44534'
end EDIT
sha256sum
d9af478d846ef2d64b11923689f9bc319778ba64eb888102e49e56216a9918ea *dd-wrt-webupgrade.bin
#
Linksys EA8500
DD-WRT v3.0-r44528 std (10/09/20)
Linux 4.9.238 #704 SMP Thu Oct 8 00:32:04 +03 2020 armv7l
GUI install over r44494
ksmbd fucked like last few builds...still borked -- NO good!!!
this is still on the switch (WAN disabled), ain't been RESET --- but should NOT have to be ...no way I will install on main.
--- works just fine with r44494 as you can see from logs below
mrjcd@Fat-Deb:~$ ssh root@ea8500.mrjcd.com
DD-WRT v3.0-r44528 std (c) 2020 NewMedia-NET GmbH
Release: 10/09/20
Board: Linksys EA8500
==========================================================
___ ___ _ _____ ______ ____ ___
/ _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \
/ // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // /
/____/____/ |__/|__/_/|_| /_/ |___/____(_)___/
DD-WRT v3.0
http://www.dd-wrt.com
==========================================================
BusyBox v1.32.0 (2020-10-09 01:28:10 +03) built-in shell (ash)
root@EA8500:~# ps
PID USER VSZ STAT COMMAND
1 root 1036 S /sbin/init
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
4 root 0 SW [kworker/0:0]
5 root 0 SW< [kworker/0:0H]
6 root 0 SW [kworker/u4:0]
7 root 0 RW [rcu_sched]
8 root 0 SW [rcu_bh]
9 root 0 SW [migration/0]
10 root 0 SW< [lru-add-drain]
11 root 0 SW [cpuhp/0]
12 root 0 SW [cpuhp/1]
13 root 0 SW [migration/1]
14 root 0 SW [ksoftirqd/1]
16 root 0 SW< [kworker/1:0H]
17 root 0 SW [oom_reaper]
18 root 0 SW< [writeback]
19 root 0 SW [kcompactd0]
20 root 0 SW< [crypto]
21 root 0 SW< [bioset]
22 root 0 SW< [kblockd]
24 root 0 SW< [watchdogd]
26 root 0 SW [kworker/0:1]
43 root 0 SW [kswapd0]
44 root 0 SW< [vmstat]
70 root 0 SW< [cryptodev_queue]
71 root 0 SW [kworker/1:1]
72 root 0 SW [kworker/u4:1]
74 root 0 SW< [bioset]
75 root 0 SW< [bioset]
76 root 0 SW< [bioset]
77 root 0 SW< [bioset]
78 root 0 SW< [bioset]
79 root 0 SW< [bioset]
80 root 0 SW< [bioset]
81 root 0 SW< [bioset]
82 root 0 SW< [bioset]
83 root 0 SW< [bioset]
84 root 0 SW< [bioset]
85 root 0 SW< [bioset]
86 root 0 SW< [bioset]
87 root 0 SW< [bioset]
88 root 0 SW< [bioset]
89 root 0 SW< [bioset]
90 root 0 SW< [bioset]
91 root 0 SW< [bioset]
92 root 0 SW< [bioset]
97 root 0 SW< [kworker/0:1H]
98 root 0 SW< [kworker/1:1H]
760 root 732 S /sbin/hotplug2 --set-rules-file /etc/hotplug2.rules --persistent
764 root 780 S /sbin/mstpd
772 root 960 S irqbalance -t 10
777 root 1772 S watchdog
804 root 0 SW< [cfg80211]
814 root 0 SW< [ath10k_wq]
815 root 0 SW< [ath10k_aux_wq]
816 root 0 SW< [ath10k_tx_compl]
817 root 0 SW< [kworker/u5:1]
820 root 0 SW< [ath10k_wq]
821 root 0 SW< [ath10k_aux_wq]
822 root 0 SW< [ath10k_tx_compl]
1092 root 1368 S syslogd -Z -L
1094 root 1368 S klogd
1101 root 1044 S dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_rsa_key -p 22 -s
1138 root 3320 S /tmp/openvpnserver --config /tmp/openvpn/openvpn.conf --daemon
1217 root 1732 S dnsmasq -u root -g root -C /tmp/dnsmasq.conf
1227 root 1732 S wland
1287 root 0 SW [kworker/1:2]
1350 root 5020 S httpd -n -p 80
1353 root 1432 S resetbutton
1424 root 1772 S process_monitor
1501 root 0 SW< [ata_sff]
1506 root 0 SW [scsi_eh_0]
1507 root 0 SW< [scsi_tmf_0]
1844 root 0 SW [scsi_eh_1]
1846 root 0 SW< [scsi_tmf_1]
1847 root 0 SW [usb-storage]
1855 root 0 SW< [bioset]
1885 root 0 SW< [kworker/u5:2]
2039 root 1100 S dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_rsa_key -p 22 -s
2040 root 1368 S -sh
2042 root 1368 R ps
root@EA8500:~# cat /tmp/disktype.dump
cat: can't open '/tmp/disktype.dump': No such file or directory
root@EA8500:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.238 (root@server2) (gcc version 10.0.1 (OpenWrt GCC 10.0.1 r12423-0493d57e04) ) #704 SMP Thu Oct 8 00:32:04 +03 2020
[ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt:Machine model: Linksys EA8500 WiFi Router
[ 0.000000] OF: fdt:Ignoring memory range 0x41500000 - 0x42000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 122880
[ 0.000000] free_area_init_node: node 0, pgdat c0b2dd80, node_mem_map ddc39000
[ 0.000000] Normal zone: 960 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 122880 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 12 pages/cpu s19084 r8192 d21876 u49152
[ 0.000000] pcpu-alloc: s19084 r8192 d21876 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920
[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:14
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 478232K/491520K available (6144K kernel code, 186K rwdata, 1016K rodata, 1024K init, 407K bss, 13288K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xde800000 - 0xff800000 ( 528 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc0900000 (7136 kB)
[ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
[ 0.000000] .data : 0xc0b00000 - 0xc0b2ebb8 ( 187 kB)
[ 0.000000] .bss : 0xc0b30000 - 0xc0b95ecc ( 408 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[ 0.000008] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[ 0.000020] Switching to timer-based delay loop, resolution 160ns
[ 0.000184] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[ 0.000204] pid_max: default: 32768 minimum: 301
[ 0.000316] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000330] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000910] CPU: Testing write buffer coherency: ok
[ 0.001200] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001251] Setting up static identity map for 0x42300000 - 0x4230003c
[ 0.004312] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.004487] Brought up 2 CPUs
[ 0.004509] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[ 0.004519] CPU: All CPU(s) started in SVC mode.
[ 0.017388] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[ 0.017577] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.017607] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.017681] pinctrl core: initialized pinctrl subsystem
[ 0.018792] NET: Registered protocol family 16
[ 0.019137] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.041399] cpuidle: using governor ladder
[ 0.094408] msm_bus_fabric_init_driver
[ 0.095584] pps_core: LinuxPPS API ver. 1 registered
[ 0.095596] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.095638] PTP clock support registered
[ 0.097451] clocksource: Switched to clocksource dg_timer
[ 0.101380] NET: Registered protocol family 2
[ 0.101976] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.102016] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.102068] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.102118] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.102143] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.102315] NET: Registered protocol family 1
[ 0.102365] PCI: CLS 0 bytes, default 64
[ 0.106333] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.115340] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.121322] cryptodev: driver 1.9 loaded.
[ 0.121364] io scheduler noop registered
[ 0.121378] io scheduler deadline registered (default)
[ 0.123034] 1b500000.pci supply vdda not found, using dummy regulator
[ 0.123126] 1b500000.pci supply vdda_phy not found, using dummy regulator
[ 0.123216] 1b500000.pci supply vdda_refclk not found, using dummy regulator
[ 0.123947] OF: PCI: host bridge /soc/pci@1b500000 ranges:
[ 0.123988] OF: PCI: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[ 0.124012] OF: PCI: MEM 0x08000000..0x0fdfffff -> 0x08000000
[ 0.227832] qcom-pcie 1b500000.pci: link up
[ 0.228011] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[ 0.228033] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.228051] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
[ 0.228066] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[ 0.228115] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.228265] pci 0000:00:00.0: supports D1
[ 0.228275] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.228551] PCI: bus0: Fast back to back transfers disabled
[ 0.228880] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.229129] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.230286] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.230857] PCI: bus1: Fast back to back transfers disabled
[ 0.231140] pci 0000:00:00.0: BAR 14: assigned [mem 0x08000000-0x081fffff]
[ 0.231166] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[ 0.231301] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.231323] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
[ 0.231728] aer 0000:00:00.0:pcie002: service driver aer loaded
[ 0.232179] 1b700000.pci supply vdda not found, using dummy regulator
[ 0.232289] 1b700000.pci supply vdda_phy not found, using dummy regulator
[ 0.232391] 1b700000.pci supply vdda_refclk not found, using dummy regulator
[ 0.233113] OF: PCI: host bridge /soc/pci@1b700000 ranges:
[ 0.233151] OF: PCI: IO 0x31e00000..0x31efffff -> 0x31e00000
[ 0.233175] OF: PCI: MEM 0x2e000000..0x31dfffff -> 0x2e000000
[ 0.337824] qcom-pcie 1b700000.pci: link up
[ 0.337982] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[ 0.337999] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.338016] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[ 0.338059] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.338181] pci 0001:00:00.0: supports D1
[ 0.338191] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[ 0.338457] PCI: bus0: Fast back to back transfers disabled
[ 0.338752] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.338975] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.340041] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.340580] PCI: bus1: Fast back to back transfers disabled
[ 0.340945] pci 0001:00:00.0: BAR 14: assigned [mem 0x2e000000-0x2e1fffff]
[ 0.340968] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[ 0.341092] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 0.341111] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
[ 0.341467] aer 0001:00:00.0:pcie002: service driver aer loaded
[ 0.341912] 1b900000.pci supply vdda not found, using dummy regulator
[ 0.342001] 1b900000.pci supply vdda_phy not found, using dummy regulator
[ 0.342087] 1b900000.pci supply vdda_refclk not found, using dummy regulator
[ 0.342810] OF: PCI: host bridge /soc/pci@1b900000 ranges:
[ 0.342845] OF: PCI: IO 0x35e00000..0x35efffff -> 0x35e00000
[ 0.342866] OF: PCI: MEM 0x32000000..0x35dfffff -> 0x32000000
[ 1.347813] qcom-pcie 1b900000.pci: phy link never came up
[ 1.349662] qcom-pcie 1b900000.pci: hostinit failed
[ 1.350378] deviceless supply s1b not found, using dummy regulator
[ 1.351932] L2 @ QSB rate. Forcing new rate.
[ 1.352104] L2 @ 800000 KHz
[ 1.352214] CPU0 @ 800000 KHz
[ 1.352224] CPU1 @ QSB rate. Forcing new rate.
[ 1.352343] CPU1 @ 800000 KHz
[ 1.354389] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[ 1.356013] serial8250_init
[ 1.356027] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 1.356976] msm_serial 16340000.serial: msm_serial: detected port #0
[ 1.357050] msm_serial 16340000.serial: uartclk = 7372800
[ 1.357107] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 201, base_baud = 460800) is a MSM
[ 1.357140] msm_serial: console setup on port #0
[ 2.097352] console [ttyMSM0] enabled
[ 2.102187] msm_serial: driver initialized
[ 2.107298] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
[ 2.109581] nand: AMD/Spansion S34MS01G2
[ 2.116003] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 2.120385] 19 ofpart partitions found on MTD device qcom_nand.0
[ 2.127289] Creating 19 MTD partitions on "qcom_nand.0":
[ 2.133522] 0x000000000000-0x000000040000 : "SBL1"
[ 2.140136] 0x000000040000-0x000000180000 : "MIBIB"
[ 2.145905] 0x000000180000-0x0000002c0000 : "SBL2"
[ 2.150724] 0x0000002c0000-0x000000540000 : "SBL3"
[ 2.153663] random: fast init done
[ 2.161447] 0x000000540000-0x000000660000 : "DDRCONFIG"
[ 2.163856] 0x000000660000-0x000000780000 : "SSD"
[ 2.168686] 0x000000780000-0x000000a00000 : "TZ"
[ 2.175393] 0x000000a00000-0x000000c80000 : "RPM"
[ 2.180048] 0x000000c80000-0x000000dc0000 : "art"
[ 2.182948] 0x000000dc0000-0x000000ec0000 : "APPSBL"
[ 2.187271] 0x000000ec0000-0x000000f00000 : "u_env"
[ 2.191346] 0x000000f00000-0x000000f40000 : "s_env"
[ 2.195871] 0x000000f40000-0x000000f80000 : "devinfo"
[ 2.200810] 0x000000f80000-0x000003780000 : "linux"
[ 2.260594] 0x000001280000-0x000003780000 : "rootfs"
[ 2.311627] mtd: partition "rootfs" set to be root filesystem
[ 2.311659] 0x000003780000-0x000005f40000 : "linux2"
[ 2.372670] 0x000003a80000-0x000005f40000 : "rootfs2"
[ 2.424008] 0x000005f40000-0x000005f80000 : "nvram"
[ 2.425166] 0x000005f80000-0x000008000000 : "ddwrt"
[ 2.450207] random: crng init done
[ 2.474804] libphy: GPIO Bitbanged MDIO: probed
[ 2.477983] libphy: Fixed MDIO Bus: probed
[ 2.498716] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
[ 3.343802] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 3.343828] Ring mode enabled
[ 3.347905] DMA HW capability register supported
[ 3.350782] Enhanced/Alternate descriptors
[ 3.356419] Enabled extended descriptors
[ 3.359435] RX Checksum Offload Engine supported
[ 3.363545] COE Type 2
[ 3.368300] TX Checksum insertion supported
[ 3.370487] Wake-Up On Lan supported
[ 3.375005] eth%d: device MAC address 00:06:3b:01:41:00
[ 3.378610] Enable RX Mitigation via HW Watchdog Timer
[ 3.384801] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 3.388891] Ring mode enabled
[ 3.394010] DMA HW capability register supported
[ 3.396964] Enhanced/Alternate descriptors
[ 3.402606] Enabled extended descriptors
[ 3.405564] RX Checksum Offload Engine supported
[ 3.409787] COE Type 2
[ 3.414415] TX Checksum insertion supported
[ 3.416676] Wake-Up On Lan supported
[ 3.421255] eth%d: device MAC address 00:03:7f:ba:db:02
[ 3.424751] Enable RX Mitigation via HW Watchdog Timer
[ 3.430625] i2c /dev entries driver
[ 3.435575] Calibration not found.
[ 3.439576] CPUidle arm: CPU 0 failed to init idle CPU ops
[ 3.442386] GACT probability NOT on
[ 3.447418] Mirror/redirect action on
[ 3.450915] Simple TC action Loaded
[ 3.455159] netem: version 1.3
[ 3.457986] u32 classifier
[ 3.461031] Performance counters on
[ 3.463723] input device check on
[ 3.467457] Actions configured
[ 3.471338] Netfilter messages via NETLINK v0.30.
[ 3.474835] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 3.479992] nf_conntrack_rtsp v0.7 loading
[ 3.485672] xt_time: kernel timezone is -0000
[ 3.489433] ip_set: protocol 6
[ 3.493950] gre: GRE over IPv4 demultiplexor driver
[ 3.497205] nf_nat_rtsp v0.7 loading
[ 3.501604] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.505507] NET: Registered protocol family 17
[ 3.510740] Bridge firewalling registered
[ 3.514857] 8021q: 802.1Q VLAN Support v1.8
[ 3.519122] Registering SWP/SWPB emulation handler
[ 3.523244] registered taskstats version 1
[ 3.536859] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
[ 3.555345] s1a: Bringing 0uV into 1050000-1050000uV
[ 3.555602] s1b: Bringing 0uV into 1050000-1050000uV
[ 3.559651] s2a: Bringing 0uV into 800000-800000uV
[ 3.564537] s2b: Bringing 0uV into 800000-800000uV
[ 3.572702] trying to register driver cpufreq-dt
[ 3.575193] searching for nvram
[ 3.578563] nvram size = 262144
[ 3.626146] no valid UBI magic found inside mtd13
[ 3.626179] hctosys: unable to open rtc device (rtc0)
[ 3.634536] VFS: Mounted root (squashfs filesystem) readonly on device 31:14.
[ 3.636053] Freeing unused kernel memory: 1024K
[ 7.167725] Loading modules backported from Linux version v5.8-rc2-0-g48778464bb7d
[ 7.167850] Backport generated by backports.git v5.8-rc2-1-0-g7a69429b
[ 7.641636] ath9k: ath9k: Driver unloaded
[ 7.944552] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 7.945221] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 8.129203] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[ 8.435945] ath10k_pci 0000:01:00.0: found firmware features ie (4 B)
[ 8.435982] ath10k_pci 0000:01:00.0: Enabling feature bit: 3
[ 8.441433] ath10k_pci 0000:01:00.0: Enabling feature bit: 12
[ 8.447097] ath10k_pci 0000:01:00.0: Enabling feature bit: 13
[ 8.452815] ath10k_pci 0000:01:00.0: Enabling feature bit: 16
[ 8.458552] ath10k_pci 0000:01:00.0: Enabling feature bit: 17
[ 8.464212] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
[ 8.469988] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[ 8.483077] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.15-00015 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 e2c838df
[ 8.563652] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:2 crc32 792a3d38
[ 8.584887] ath10k_pci 0000:01:00.0: boot already acquired valid otp board id,skip download, board_id 2 chip_id 1
[ 9.825165] ath10k_pci 0000:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr c0:56:27:08:b2:92 status 0
[ 9.855749] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[ 9.962158] ath: EEPROM regdomain sanitized
[ 9.962169] ath: EEPROM regdomain: 0x64
[ 9.962176] ath: EEPROM indicates we should expect a direct regpair map
[ 9.962192] ath: Country alpha2 being used: 00
[ 9.962198] ath: Regpair used: 0x64
[ 9.967860] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[ 9.968484] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 10.157519] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[ 10.157681] ath10k_pci 0001:01:00.0: found firmware features ie (4 B)
[ 10.167115] ath10k_pci 0001:01:00.0: Enabling feature bit: 3
[ 10.173710] ath10k_pci 0001:01:00.0: Enabling feature bit: 12
[ 10.179442] ath10k_pci 0001:01:00.0: Enabling feature bit: 13
[ 10.184994] ath10k_pci 0001:01:00.0: Enabling feature bit: 16
[ 10.190814] ath10k_pci 0001:01:00.0: Enabling feature bit: 17
[ 10.196470] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
[ 10.202281] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[ 10.215952] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.15-00015 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 e2c838df
[ 10.278585] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:1 crc32 792a3d38
[ 10.299717] ath10k_pci 0001:01:00.0: boot already acquired valid otp board id,skip download, board_id 1 chip_id 1
[ 11.534618] ath10k_pci 0001:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr c0:56:27:08:b2:92 status 0
[ 11.564729] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[ 11.664583] ath: EEPROM regdomain sanitized
[ 11.664595] ath: EEPROM regdomain: 0x64
[ 11.664602] ath: EEPROM indicates we should expect a direct regpair map
[ 11.664621] ath: Country alpha2 being used: 00
[ 11.664628] ath: Regpair used: 0x64
[ 12.755428] dwmac1000: Master AXI performs any burst length
[ 12.755491] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 12.760127] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[ 12.880833] dwmac1000: Master AXI performs any burst length
[ 12.880873] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 12.885323] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 13.847867] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 14.864616] device br0 entered promiscuous mode
[ 14.921914] br0: port 1(vlan1) entered blocking state
[ 14.924385] br0: port 1(vlan1) entered disabled state
[ 14.929695] device vlan1 entered promiscuous mode
[ 14.934452] device eth0 entered promiscuous mode
[ 14.939274] br0: port 1(vlan1) entered blocking state
[ 14.943830] br0: port 1(vlan1) entered forwarding state
[ 14.979752] br0: port 2(vlan2) entered blocking state
[ 14.982227] br0: port 2(vlan2) entered disabled state
[ 14.987442] device vlan2 entered promiscuous mode
[ 14.992405] br0: port 2(vlan2) entered blocking state
[ 14.996983] br0: port 2(vlan2) entered forwarding state
[ 15.007423] device br0 left promiscuous mode
[ 15.011077] device br0 entered promiscuous mode
[ 15.018547] device br0 left promiscuous mode
[ 15.114594] ath: EEPROM regdomain: 0x8348
[ 15.114600] ath: EEPROM indicates we should expect a country code
[ 15.114604] ath: doing EEPROM country->regdmn map search
[ 15.114609] ath: country maps to regdmn code: 0x3a
[ 15.114612] ath: Country alpha2 being used: US
[ 15.114615] ath: Regpair used: 0x3a
[ 15.114620] ath: regdomain 0x8348 dynamically updated by user
[ 15.114633] ath: EEPROM regdomain: 0x8348
[ 15.114636] ath: EEPROM indicates we should expect a country code
[ 15.114639] ath: doing EEPROM country->regdmn map search
[ 15.114643] ath: country maps to regdmn code: 0x3a
[ 15.114645] ath: Country alpha2 being used: US
[ 15.114648] ath: Regpair used: 0x3a
[ 15.114652] ath: regdomain 0x8348 dynamically updated by user
[ 15.503719] tun: Universal TUN/TAP device driver, 1.6
[ 15.504882] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 16.844874] Linux kernel CIFS/SMB SERVER 3.2.3 by Namjae Jeon <linkinjeon@kernel.org>
[ 17.453327] usbcore: registered new interface driver usbfs
[ 17.453433] usbcore: registered new interface driver hub
[ 17.457857] usbcore: registered new device driver usb
[ 17.513223] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 17.520957] ehci-platform: EHCI generic platform driver
[ 17.540460] ehci-pci: EHCI PCI platform driver
[ 17.602380] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 17.964760] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 17.964843] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 17.969408] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 17.976731] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
[ 17.986102] hub 1-0:1.0: USB hub found
[ 17.991759] hub 1-0:1.0: 1 port detected
[ 17.995511] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 17.999369] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 18.004652] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 18.012668] hub 2-0:1.0: USB hub found
[ 18.020654] hub 2-0:1.0: 1 port detected
[ 18.098694] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 18.098743] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 18.103255] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 18.110749] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
[ 18.119962] hub 3-0:1.0: USB hub found
[ 18.125766] hub 3-0:1.0: 1 port detected
[ 18.129602] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 18.133291] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 18.138676] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 18.146540] hub 4-0:1.0: USB hub found
[ 18.154711] hub 4-0:1.0: 1 port detected
[ 18.497823] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 23.193944] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 23.193981] usb usb4: USB disconnect, device number 1
[ 23.198509] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered
[ 23.203038] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 23.208826] usb usb3: USB disconnect, device number 1
[ 23.213682] usb 3-1: USB disconnect, device number 2
[ 23.221082] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered
[ 23.224292] xhci-hcd xhci-hcd.0.auto: remove, state 1
[ 23.229503] usb usb2: USB disconnect, device number 1
[ 23.239123] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
[ 23.239799] xhci-hcd xhci-hcd.0.auto: remove, state 1
[ 23.245123] usb usb1: USB disconnect, device number 1
[ 23.251220] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
[ 23.305362] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 23.305447] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 23.309990] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 23.317306] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
[ 23.326630] hub 1-0:1.0: USB hub found
[ 23.332333] hub 1-0:1.0: 1 port detected
[ 23.336103] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 23.339979] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 23.345256] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 23.353751] hub 2-0:1.0: USB hub found
[ 23.361607] hub 2-0:1.0: 1 port detected
[ 23.364972] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 23.368786] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 23.374151] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 23.381605] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
[ 23.390882] hub 3-0:1.0: USB hub found
[ 23.396565] hub 3-0:1.0: 1 port detected
[ 23.400407] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 23.404115] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 23.409551] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 23.417449] hub 4-0:1.0: USB hub found
[ 23.425534] hub 4-0:1.0: 1 port detected
[ 23.478865] SCSI subsystem initialized
[ 23.577981] usbcore: registered new interface driver usb-storage
[ 23.653850] libata version 3.00 loaded.
[ 23.691860] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
[ 23.691912] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 23.696237] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
[ 23.705552] scsi host0: ahci
[ 23.713385] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 95
[ 23.807622] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 23.968891] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 23.969114] scsi host1: usb-storage 3-1:1.0
[ 24.039199] ata1: SATA link down (SStatus 0 SControl 300)
[ 24.190775] sdhci: Secure Digital Host Controller Interface driver
[ 24.190798] sdhci: Copyright(c) Pierre Ossman
[ 24.203385] sdhci-pltfm: SDHCI platform and OF driver helper
[ 25.058651] scsi 1:0:0:0: Direct-Access USB Flash Drive 1.00 PQ: 0 ANSI: 6
[ 25.060197] sd 1:0:0:0: [sda] 30629376 512-byte logical blocks: (15.7 GB/14.6 GiB)
[ 25.066927] sd 1:0:0:0: [sda] Write Protect is off
[ 25.073269] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 25.073538] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 25.083468] sda: sda1
[ 25.089020] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 25.154141] ksmbd: kill command received
[ 124.241432] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 124.241470] usb usb4: USB disconnect, device number 1
[ 124.245959] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered
[ 124.250585] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 124.256237] usb usb3: USB disconnect, device number 1
[ 124.261238] usb 3-1: USB disconnect, device number 2
[ 124.323034] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered
[ 124.335039] xhci-hcd xhci-hcd.0.auto: remove, state 1
[ 124.341859] usb usb2: USB disconnect, device number 1
[ 124.357125] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
[ 124.371088] xhci-hcd xhci-hcd.0.auto: remove, state 1
[ 124.379783] usb usb1: USB disconnect, device number 1
[ 124.390315] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
[ 124.425449] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 124.434412] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 124.440047] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 124.447397] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
[ 124.456639] hub 1-0:1.0: USB hub found
[ 124.462592] hub 1-0:1.0: 1 port detected
[ 124.471894] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 124.475520] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 124.481554] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 124.489364] hub 2-0:1.0: USB hub found
[ 124.497099] hub 2-0:1.0: 1 port detected
[ 124.503297] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 124.512143] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 124.517831] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 124.525183] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
[ 124.534449] hub 3-0:1.0: USB hub found
[ 124.543343] hub 3-0:1.0: 1 port detected
[ 124.549692] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 124.553301] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 124.558923] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 124.566632] hub 4-0:1.0: USB hub found
[ 124.578146] hub 4-0:1.0: 1 port detected
[ 124.907831] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 125.068974] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 125.072508] scsi host1: usb-storage 3-1:1.0
[ 126.088169] scsi 1:0:0:0: Direct-Access USB Flash Drive 1.00 PQ: 0 ANSI: 6
[ 126.089089] sd 1:0:0:0: [sda] 30629376 512-byte logical blocks: (15.7 GB/14.6 GiB)
[ 126.095759] sd 1:0:0:0: [sda] Write Protect is off
[ 126.102768] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 126.103287] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 126.110003] sda: sda1
[ 126.118849] sd 1:0:0:0: [sda] Attached SCSI removable disk
root@EA8500:~# cat /tmp/var/log/messages
Dec 31 18:00:14 EA8500 syslog.info syslogd started: BusyBox v1.32.0
Dec 31 18:00:14 EA8500 user.info : syslogd : daemon successfully started
Dec 31 18:00:14 EA8500 user.info : klogd : daemon successfully started
Dec 31 18:00:14 EA8500 kern.notice kernel: klogd started: BusyBox v1.32.0 (2020-10-09 01:28:10 +03)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Booting Linux on physical CPU 0x0
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] Linux version 4.9.238 (root@server2) (gcc version 10.0.1 (OpenWrt GCC 10.0.1 r12423-0493d57e04) ) #704 SMP Thu Oct 8 00:32:04 +03 2020
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] CPU: div instructions available: patching division code
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] OF: fdt:Machine model: Linksys EA8500 WiFi Router
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.000000] OF: fdt:Ignoring memory range 0x41500000 - 0x42000000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Memory policy: Data cache writealloc
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] On node 0 totalpages: 122880
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat c0b2dd80, node_mem_map ddc39000
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] Normal zone: 960 pages used for memmap
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] Normal zone: 122880 pages, LIFO batch:31
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] percpu: Embedded 12 pages/cpu s19084 r8192 d21876 u49152
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] pcpu-alloc: s19084 r8192 d21876 u49152 alloc=12*4096
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:14
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Memory: 478232K/491520K available (6144K kernel code, 186K rwdata, 1016K rodata, 1024K init, 407K bss, 13288K reserved, 0K cma-reserved, 0K highmem)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] Virtual kernel memory layout:
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] vmalloc : 0xde800000 - 0xff800000 ( 528 MB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] .text : 0xc0208000 - 0xc0900000 (7136 kB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] .data : 0xc0b00000 - 0xc0b2ebb8 ( 187 kB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] .bss : 0xc0b30000 - 0xc0b95ecc ( 408 kB)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Hierarchical RCU implementation.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] NR_IRQS:16 nr_irqs:16 16
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000008] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000020] Switching to timer-based delay loop, resolution 160ns
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000184] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000204] pid_max: default: 32768 minimum: 301
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000316] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000330] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000910] CPU: Testing write buffer coherency: ok
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.001200] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.001251] Setting up static identity map for 0x42300000 - 0x4230003c
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.004312] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.004487] Brought up 2 CPUs
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.004509] SMP: Total of 2 processors activated (25.00 BogoMIPS).
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.004519] CPU: All CPU(s) started in SVC mode.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.017388] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.017577] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.017607] futex hash table entries: 512 (order: 3, 32768 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.017681] pinctrl core: initialized pinctrl subsystem
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.018792] NET: Registered protocol family 16
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.019137] DMA: preallocated 256 KiB pool for atomic coherent allocations
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.041399] cpuidle: using governor ladder
Dec 31 18:00:14 EA8500 kern.err kernel: [ 0.094408] msm_bus_fabric_init_driver
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.095584] pps_core: LinuxPPS API ver. 1 registered
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.095596] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.095638] PTP clock support registered
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.097451] clocksource: Switched to clocksource dg_timer
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.101380] NET: Registered protocol family 2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.101976] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.102016] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.102068] TCP: Hash tables configured (established 4096 bind 4096)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.102118] UDP hash table entries: 256 (order: 1, 8192 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.102143] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.102315] NET: Registered protocol family 1
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.102365] PCI: CLS 0 bytes, default 64
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.106333] workingset: timestamp_bits=30 max_order=17 bucket_order=0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.115340] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.121322] cryptodev: driver 1.9 loaded.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.121364] io scheduler noop registered
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.121378] io scheduler deadline registered (default)
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.123034] 1b500000.pci supply vdda not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.123126] 1b500000.pci supply vdda_phy not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.123216] 1b500000.pci supply vdda_refclk not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.123947] OF: PCI: host bridge /soc/pci@1b500000 ranges:
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.123988] OF: PCI: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.124012] OF: PCI: MEM 0x08000000..0x0fdfffff -> 0x08000000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.227832] qcom-pcie 1b500000.pci: link up
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.228011] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.228033] pci_bus 0000:00: root bus resource [bus 00-ff]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.228051] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.228066] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.228115] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.228265] pci 0000:00:00.0: supports D1
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.228275] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.228551] PCI: bus0: Fast back to back transfers disabled
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.228880] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.229129] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.230286] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.230857] PCI: bus1: Fast back to back transfers disabled
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.231140] pci 0000:00:00.0: BAR 14: assigned [mem 0x08000000-0x081fffff]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.231166] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.231301] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.231323] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.231728] aer 0000:00:00.0:pcie002: service driver aer loaded
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.232179] 1b700000.pci supply vdda not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.232289] 1b700000.pci supply vdda_phy not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.232391] 1b700000.pci supply vdda_refclk not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.233113] OF: PCI: host bridge /soc/pci@1b700000 ranges:
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.233151] OF: PCI: IO 0x31e00000..0x31efffff -> 0x31e00000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.233175] OF: PCI: MEM 0x2e000000..0x31dfffff -> 0x2e000000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.337824] qcom-pcie 1b700000.pci: link up
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.337982] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.337999] pci_bus 0001:00: root bus resource [bus 00-ff]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.338016] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.338059] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.338181] pci 0001:00:00.0: supports D1
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.338191] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.338457] PCI: bus0: Fast back to back transfers disabled
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.338752] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.338975] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.340041] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.340580] PCI: bus1: Fast back to back transfers disabled
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.340945] pci 0001:00:00.0: BAR 14: assigned [mem 0x2e000000-0x2e1fffff]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.340968] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.341092] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.341111] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.341467] aer 0001:00:00.0:pcie002: service driver aer loaded
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.341912] 1b900000.pci supply vdda not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.342001] 1b900000.pci supply vdda_phy not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.342087] 1b900000.pci supply vdda_refclk not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.342810] OF: PCI: host bridge /soc/pci@1b900000 ranges:
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.342845] OF: PCI: IO 0x35e00000..0x35efffff -> 0x35e00000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.342866] OF: PCI: MEM 0x32000000..0x35dfffff -> 0x32000000
Dec 31 18:00:14 EA8500 kern.err kernel: [ 1.347813] qcom-pcie 1b900000.pci: phy link never came up
Dec 31 18:00:14 EA8500 kern.err kernel: [ 1.349662] qcom-pcie 1b900000.pci: hostinit failed
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 1.350378] deviceless supply s1b not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.351932] L2 @ QSB rate. Forcing new rate.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.352104] L2 @ 800000 KHz
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.352214] CPU0 @ 800000 KHz
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.352224] CPU1 @ QSB rate. Forcing new rate.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.352343] CPU1 @ 800000 KHz
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.354389] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.356013] serial8250_init
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.356027] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.356976] msm_serial 16340000.serial: msm_serial: detected port #0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.357050] msm_serial 16340000.serial: uartclk = 7372800
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.357107] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 201, base_baud = 460800) is a MSM
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.357140] msm_serial: console setup on port #0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.097352] console [ttyMSM0] enabled
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.102187] msm_serial: driver initialized
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.107298] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.109581] nand: AMD/Spansion S34MS01G2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.116003] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.120385] 19 ofpart partitions found on MTD device qcom_nand.0
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.127289] Creating 19 MTD partitions on "qcom_nand.0":
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.133522] 0x000000000000-0x000000040000 : "SBL1"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.140136] 0x000000040000-0x000000180000 : "MIBIB"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.145905] 0x000000180000-0x0000002c0000 : "SBL2"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.150724] 0x0000002c0000-0x000000540000 : "SBL3"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.153663] random: fast init done
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.161447] 0x000000540000-0x000000660000 : "DDRCONFIG"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.163856] 0x000000660000-0x000000780000 : "SSD"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.168686] 0x000000780000-0x000000a00000 : "TZ"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.175393] 0x000000a00000-0x000000c80000 : "RPM"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.180048] 0x000000c80000-0x000000dc0000 : "art"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.182948] 0x000000dc0000-0x000000ec0000 : "APPSBL"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.187271] 0x000000ec0000-0x000000f00000 : "u_env"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.191346] 0x000000f00000-0x000000f40000 : "s_env"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.195871] 0x000000f40000-0x000000f80000 : "devinfo"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.200810] 0x000000f80000-0x000003780000 : "linux"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.260594] 0x000001280000-0x000003780000 : "rootfs"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.311627] mtd: partition "rootfs" set to be root filesystem
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.311659] 0x000003780000-0x000005f40000 : "linux2"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.372670] 0x000003a80000-0x000005f40000 : "rootfs2"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.424008] 0x000005f40000-0x000005f80000 : "nvram"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.425166] 0x000005f80000-0x000008000000 : "ddwrt"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.450207] random: crng init done
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.474804] libphy: GPIO Bitbanged MDIO: probed
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.477983] libphy: Fixed MDIO Bus: probed
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.498716] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.343802] stmmac - user ID: 0x10, Synopsys ID: 0x37
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.343828] Ring mode enabled
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.347905] DMA HW capability register supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.350782] Enhanced/Alternate descriptors
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.356419] Enabled extended descriptors
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.359435] RX Checksum Offload Engine supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.363545] COE Type 2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.368300] TX Checksum insertion supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.370487] Wake-Up On Lan supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.375005] eth%d: device MAC address 00:06:3b:01:41:00
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.378610] Enable RX Mitigation via HW Watchdog Timer
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.384801] stmmac - user ID: 0x10, Synopsys ID: 0x37
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.388891] Ring mode enabled
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.394010] DMA HW capability register supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.396964] Enhanced/Alternate descriptors
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.402606] Enabled extended descriptors
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.405564] RX Checksum Offload Engine supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.409787] COE Type 2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.414415] TX Checksum insertion supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.416676] Wake-Up On Lan supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.421255] eth%d: device MAC address 00:03:7f:ba:db:02
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.424751] Enable RX Mitigation via HW Watchdog Timer
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.430625] i2c /dev entries driver
Dec 31 18:00:14 EA8500 kern.err kernel: [ 3.435575] Calibration not found.
Dec 31 18:00:14 EA8500 kern.err kernel: [ 3.439576] CPUidle arm: CPU 0 failed to init idle CPU ops
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.442386] GACT probability NOT on
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.447418] Mirror/redirect action on
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.450915] Simple TC action Loaded
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.455159] netem: version 1.3
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.457986] u32 classifier
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.461031] Performance counters on
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.463723] input device check on
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.467457] Actions configured
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.471338] Netfilter messages via NETLINK v0.30.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.474835] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 3.479992] nf_conntrack_rtsp v0.7 loading
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.485672] xt_time: kernel timezone is -0000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.489433] ip_set: protocol 6
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.493950] gre: GRE over IPv4 demultiplexor driver
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 3.497205] nf_nat_rtsp v0.7 loading
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.501604] ip_tables: (C) 2000-2006 Netfilter Core Team
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.505507] NET: Registered protocol family 17
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 3.510740] Bridge firewalling registered
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.514857] 8021q: 802.1Q VLAN Support v1.8
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 3.519122] Registering SWP/SWPB emulation handler
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.523244] registered taskstats version 1
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.536859] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.555345] s1a: Bringing 0uV into 1050000-1050000uV
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.555602] s1b: Bringing 0uV into 1050000-1050000uV
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.559651] s2a: Bringing 0uV into 800000-800000uV
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.564537] s2b: Bringing 0uV into 800000-800000uV
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.572702] trying to register driver cpufreq-dt
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.575193] searching for nvram
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.578563] nvram size = 262144
Dec 31 18:00:14 EA8500 kern.err kernel: [ 3.626146] no valid UBI magic found inside mtd13
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.626179] hctosys: unable to open rtc device (rtc0)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.634536] VFS: Mounted root (squashfs filesystem) readonly on device 31:14.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.636053] Freeing unused kernel memory: 1024K
Dec 31 18:00:14 EA8500 kern.info kernel: [ 7.167725] Loading modules backported from Linux version v5.8-rc2-0-g48778464bb7d
Dec 31 18:00:14 EA8500 kern.info kernel: [ 7.167850] Backport generated by backports.git v5.8-rc2-1-0-g7a69429b
Dec 31 18:00:14 EA8500 kern.info kernel: [ 7.641636] ath9k: ath9k: Driver unloaded
Dec 31 18:00:14 EA8500 kern.info kernel: [ 7.944552] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 7.945221] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 8.129203] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.435945] ath10k_pci 0000:01:00.0: found firmware features ie (4 B)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.435982] ath10k_pci 0000:01:00.0: Enabling feature bit: 3
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.441433] ath10k_pci 0000:01:00.0: Enabling feature bit: 12
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.447097] ath10k_pci 0000:01:00.0: Enabling feature bit: 13
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.452815] ath10k_pci 0000:01:00.0: Enabling feature bit: 16
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.458552] ath10k_pci 0000:01:00.0: Enabling feature bit: 17
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.464212] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.469988] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.483077] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.15-00015 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 e2c838df
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.563652] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:2 crc32 792a3d38
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.584887] ath10k_pci 0000:01:00.0: boot already acquired valid otp board id,skip download, board_id 2 chip_id 1
Dec 31 18:00:14 EA8500 kern.info kernel: [ 9.825165] ath10k_pci 0000:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr c0:56:27:08:b2:92 status 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 9.855749] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 9.962158] ath: EEPROM regdomain sanitized
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 9.962169] ath: EEPROM regdomain: 0x64
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 9.962176] ath: EEPROM indicates we should expect a direct regpair map
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 9.962192] ath: Country alpha2 being used: 00
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 9.962198] ath: Regpair used: 0x64
Dec 31 18:00:14 EA8500 kern.info kernel: [ 9.967860] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 9.968484] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 10.157519] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.157681] ath10k_pci 0001:01:00.0: found firmware features ie (4 B)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.167115] ath10k_pci 0001:01:00.0: Enabling feature bit: 3
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.173710] ath10k_pci 0001:01:00.0: Enabling feature bit: 12
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.179442] ath10k_pci 0001:01:00.0: Enabling feature bit: 13
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.184994] ath10k_pci 0001:01:00.0: Enabling feature bit: 16
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.190814] ath10k_pci 0001:01:00.0: Enabling feature bit: 17
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.196470] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.202281] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.215952] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.15-00015 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 e2c838df
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.278585] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:1 crc32 792a3d38
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.299717] ath10k_pci 0001:01:00.0: boot already acquired valid otp board id,skip download, board_id 1 chip_id 1
Dec 31 18:00:14 EA8500 kern.info kernel: [ 11.534618] ath10k_pci 0001:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr c0:56:27:08:b2:92 status 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 11.564729] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 11.664583] ath: EEPROM regdomain sanitized
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 11.664595] ath: EEPROM regdomain: 0x64
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 11.664602] ath: EEPROM indicates we should expect a direct regpair map
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 11.664621] ath: Country alpha2 being used: 00
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 11.664628] ath: Regpair used: 0x64
Dec 31 18:00:14 EA8500 kern.info kernel: [ 12.755428] dwmac1000: Master AXI performs any burst length
Dec 31 18:00:14 EA8500 kern.info kernel: [ 12.755491] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 12.760127] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
Dec 31 18:00:14 EA8500 kern.info kernel: [ 12.880833] dwmac1000: Master AXI performs any burst length
Dec 31 18:00:14 EA8500 kern.info kernel: [ 12.880873] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 12.885323] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
Dec 31 18:00:14 EA8500 kern.info kernel: [ 13.847867] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
Dec 31 18:00:14 EA8500 daemon.info smartd[878]: smartd 7.1 2019-12-30 r5022 [armv7l-linux-4.9.238] (local build)
Dec 31 18:00:14 EA8500 daemon.info smartd[878]: Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
Dec 31 18:00:14 EA8500 daemon.info smartd[878]: Opened configuration file /usr/etc/smartd.conf
Dec 31 18:00:14 EA8500 daemon.info smartd[878]: Drive: DEVICESCAN, implied '-a' Directive on line 32 of file /usr/etc/smartd.conf
Dec 31 18:00:14 EA8500 daemon.info smartd[878]: Configuration file /usr/etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Dec 31 18:00:14 EA8500 daemon.crit smartd[878]: In the system's table of devices NO devices found to scan
Dec 31 18:00:14 EA8500 daemon.info smartd[878]: Unable to monitor any SMART enabled devices. Try debug (-d) option. Exiting...
Dec 31 18:00:14 EA8500 user.info : resetbutton : resetbutton daemon successfully started
Dec 31 18:00:14 EA8500 user.info : bridge : bridge br0 successfully added
Dec 31 18:00:14 EA8500 daemon.info mstpd[764]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
Dec 31 18:00:14 EA8500 daemon.info mstpd[764]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
Dec 31 18:00:14 EA8500 daemon.info mstpd[764]: error, CTL_set_msti_bridge_config: Couldn't find bridge with index 9
Dec 31 18:00:14 EA8500 user.info : bridge : interface wlan0 successfully deleted from bridge br0
Dec 31 18:00:14 EA8500 user.info : bridge : interface wlan1 successfully deleted from bridge br0
Dec 31 18:00:14 EA8500 user.info : bridge : bridge br0 successfully added
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.864616] device br0 entered promiscuous mode
Dec 31 18:00:14 EA8500 daemon.info mstpd[764]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
Dec 31 18:00:14 EA8500 daemon.info mstpd[764]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
Dec 31 18:00:14 EA8500 user.info : bridge : interface vlan1 successfully added to bridge br0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.921914] br0: port 1(vlan1) entered blocking state
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.924385] br0: port 1(vlan1) entered disabled state
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.929695] device vlan1 entered promiscuous mode
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.934452] device eth0 entered promiscuous mode
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.939274] br0: port 1(vlan1) entered blocking state
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.943830] br0: port 1(vlan1) entered forwarding state
Dec 31 18:00:14 EA8500 user.info : bridge : interface vlan2 successfully added to bridge br0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.979752] br0: port 2(vlan2) entered blocking state
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.982227] br0: port 2(vlan2) entered disabled state
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.987442] device vlan2 entered promiscuous mode
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.992405] br0: port 2(vlan2) entered blocking state
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.996983] br0: port 2(vlan2) entered forwarding state
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.007423] device br0 left promiscuous mode
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.011077] device br0 entered promiscuous mode
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.018547] device br0 left promiscuous mode
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.114594] ath: EEPROM regdomain: 0x8348
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.114600] ath: EEPROM indicates we should expect a country code
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.114604] ath: doing EEPROM country->regdmn map search
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.114609] ath: country maps to regdmn code: 0x3a
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.114612] ath: Country alpha2 being used: US
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.114615] ath: Regpair used: 0x3a
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.114620] ath: regdomain 0x8348 dynamically updated by user
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.114633] ath: EEPROM regdomain: 0x8348
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.114636] ath: EEPROM indicates we should expect a country code
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.114639] ath: doing EEPROM country->regdmn map search
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.114643] ath: country maps to regdmn code: 0x3a
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.114645] ath: Country alpha2 being used: US
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.114648] ath: Regpair used: 0x3a
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.114652] ath: regdomain 0x8348 dynamically updated by user
Dec 31 18:00:15 EA8500 daemon.info smartd[1066]: smartd 7.1 2019-12-30 r5022 [armv7l-linux-4.9.238] (local build)
Dec 31 18:00:15 EA8500 user.info : hwmon : successfully started
Dec 31 18:00:15 EA8500 user.info : klogd : kernel log daemon successfully stopped
Dec 31 18:00:15 EA8500 user.info : sfe : shortcut forwarding engine successfully stopped
Dec 31 18:00:15 EA8500 kern.notice kernel: klogd: exiting
Dec 31 18:00:15 EA8500 daemon.info smartd[1066]: Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
Dec 31 18:00:15 EA8500 daemon.info smartd[1066]: Opened configuration file /usr/etc/smartd.conf
Dec 31 18:00:15 EA8500 daemon.info smartd[1066]: Drive: DEVICESCAN, implied '-a' Directive on line 32 of file /usr/etc/smartd.conf
Dec 31 18:00:15 EA8500 daemon.info smartd[1066]: Configuration file /usr/etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Dec 31 18:00:15 EA8500 daemon.crit smartd[1066]: In the system's table of devices NO devices found to scan
Dec 31 18:00:15 EA8500 daemon.info smartd[1066]: Unable to monitor any SMART enabled devices. Try debug (-d) option. Exiting...
Dec 31 18:00:15 EA8500 user.info : openvpn : OpenVPN daemon (Server) starting/restarting...
Dec 31 18:00:15 EA8500 user.info : wland : daemon successfully started
Dec 31 18:00:15 EA8500 user.info : syslogd : syslog daemon successfully stopped
Dec 31 18:00:15 EA8500 syslog.info syslogd exiting
Dec 31 18:00:15 EA8500 syslog.info syslogd started: BusyBox v1.32.0
Dec 31 18:00:15 EA8500 user.info : klogd : daemon successfully started
Dec 31 18:00:15 EA8500 kern.notice kernel: klogd started: BusyBox v1.32.0 (2020-10-09 01:28:10 +03)
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.503719] tun: Universal TUN/TAP device driver, 1.6
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.504882] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Dec 31 18:00:15 EA8500 user.info : dropbear : ssh daemon successfully started
Dec 31 18:00:15 EA8500 user.info : cron : daemon successfully started
Dec 31 18:00:15 EA8500 cron.info cron[1100]: (CRON) STARTUP (fork ok)
Dec 31 18:00:15 EA8500 authpriv.info dropbear[1101]: Running in background
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1126]: started, version 2.82 cachesize 1500
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1126]: compile time options: IPv6 GNU-getopt no-DBus no-UBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP no-conntrack ipset no-auth DNSSEC loop-detect no-inotify no-dumpfile
Dec 31 18:00:16 EA8500 daemon.warn dnsmasq[1126]: warning: interface vlan15 does not currently exist
Dec 31 18:00:16 EA8500 daemon.info dnsmasq-dhcp[1126]: DHCP, IP range 192.168.1.6 -- 192.168.1.10, lease time 12h
Dec 31 18:00:16 EA8500 user.info : dnsmasq : daemon successfully started
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1126]: using only locally-known addresses for domain test
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1126]: using only locally-known addresses for domain onion
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1126]: using only locally-known addresses for domain localhost
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1126]: using only locally-known addresses for domain local
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1126]: using only locally-known addresses for domain invalid
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1126]: using only locally-known addresses for domain bind
Dec 31 18:00:16 EA8500 daemon.warn dnsmasq[1126]: failed to access /tmp/resolv.dnsmasq: No such file or directory
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1126]: read /etc/hosts - 3 addresses
Dec 31 18:00:16 EA8500 daemon.warn openvpn[1087]: WARNING: Using --management on a TCP port WITHOUT passwords is STRONGLY discouraged and considered insecure
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1087]: OpenVPN 2.4.9 arm-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD] built on Oct 9 2020
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1087]: library versions: OpenSSL 1.1.1h 22 Sep 2020, LZO 2.09
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1138]: MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:14
Dec 31 18:00:16 EA8500 daemon.warn openvpn[1138]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1138]: Diffie-Hellman initialized with 2048 bit key
Dec 31 18:00:16 EA8500 daemon.warn openvpn[1138]: WARNING: Your certificate is not yet valid!
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1138]: TUN/TAP device tun2 opened
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1138]: TUN/TAP TX queue length set to 100
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1138]: /sbin/ifconfig tun2 10.19.92.225 netmask 255.255.255.224 mtu 1500 broadcast 10.19.92.255
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1138]: Socket Buffers: R=[180224->180224] S=[180224->180224]
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1138]: UDPv4 link local (bound): [AF_INET][undef]:43210
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1138]: UDPv4 link remote: [AF_UNSPEC]
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1138]: MULTI: multi_init called, r=256 v=256
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1138]: IFCONFIG POOL: base=10.19.92.226 size=28, ipv6=0
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1138]: IFCONFIG POOL LIST
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1138]: Initialization Sequence Completed
Dec 31 18:00:16 EA8500 user.info : dnsmasq : daemon successfully stopped
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1126]: exiting on receipt of SIGTERM
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1217]: started, version 2.82 cachesize 1500
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1217]: compile time options: IPv6 GNU-getopt no-DBus no-UBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP no-conntrack ipset no-auth DNSSEC loop-detect no-inotify no-dumpfile
Dec 31 18:00:16 EA8500 daemon.warn dnsmasq[1217]: warning: interface vlan15 does not currently exist
Dec 31 18:00:16 EA8500 daemon.info dnsmasq-dhcp[1217]: DHCP, IP range 192.168.1.6 -- 192.168.1.10, lease time 12h
Dec 31 18:00:16 EA8500 user.info : dnsmasq : daemon successfully started
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1217]: using only locally-known addresses for domain test
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1217]: using only locally-known addresses for domain onion
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1217]: using only locally-known addresses for domain localhost
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1217]: using only locally-known addresses for domain local
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1217]: using only locally-known addresses for domain invalid
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1217]: using only locally-known addresses for domain bind
Dec 31 18:00:16 EA8500 daemon.warn dnsmasq[1217]: failed to access /tmp/resolv.dnsmasq: No such file or directory
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1217]: read /etc/hosts - 3 addresses
Dec 31 18:00:16 EA8500 user.info : wland : daemon successfully stopped
Dec 31 18:00:16 EA8500 user.info : wland : daemon successfully started
Dec 31 18:00:16 EA8500 kern.info kernel: [ 16.844874] Linux kernel CIFS/SMB SERVER 3.2.3 by Namjae Jeon <linkinjeon@kernel.org>
Dec 31 18:00:16 EA8500 user.info wsdd2[1267]: starting.
Dec 31 18:00:16 EA8500 user.info : smbd : samba started
Dec 31 18:00:17 EA8500 user.info : sfe : shortcut forwarding engine successfully stopped
Dec 31 18:00:17 EA8500 user.info : process_monitor : successfully started
Dec 31 18:00:17 EA8500 daemon.debug ntpclient[1328]: Connecting to 2.pool.ntp.org [54.39.23.64] ...
Dec 31 18:00:17 EA8500 daemon.info httpd[1331]: httpd : httpd server started at port 80
Dec 31 18:00:17 EA8500 daemon.info httpd[1335]: httpd : httpd server started at port 80
Dec 31 18:00:17 EA8500 daemon.err httpd[1335]: httpd : can't bind to any address
Dec 31 18:00:17 EA8500 user.info : httpd : http daemon successfully started
Dec 31 18:00:17 EA8500 user.info : httpd : http daemon successfully started
Dec 31 18:00:17 EA8500 user.info : resetbutton : daemon successfully stopped
Oct 8 20:33:52 EA8500 daemon.info ntpclient[1328]: Time set from 2.pool.ntp.org [54.39.23.64].
Oct 8 20:33:52 EA8500 daemon.info process_monitor[1327]: cyclic NTP Update success (servers 2.pool.ntp.org 212.18.3.19 88.99.174.22)
Oct 8 20:33:52 EA8500 user.info : resetbutton : resetbutton daemon successfully started
Oct 8 20:33:52 EA8500 kern.info kernel: [ 17.453327] usbcore: registered new interface driver usbfs
Oct 8 20:33:52 EA8500 kern.info kernel: [ 17.453433] usbcore: registered new interface driver hub
Oct 8 20:33:52 EA8500 kern.info kernel: [ 17.457857] usbcore: registered new device driver usb
Oct 8 20:33:52 EA8500 kern.info kernel: [ 17.513223] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 8 20:33:52 EA8500 kern.info kernel: [ 17.520957] ehci-platform: EHCI generic platform driver
Oct 8 20:33:52 EA8500 kern.info kernel: [ 17.540460] ehci-pci: EHCI PCI platform driver
Oct 8 20:33:52 EA8500 daemon.debug process_monitor[1327]: Restarting cron (time sync change)
Oct 8 20:33:52 EA8500 user.info : cron : daemon successfully stopped
Oct 8 20:33:52 EA8500 kern.info kernel: [ 17.602380] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 8 20:33:53 EA8500 user.info : cron : daemon successfully started
Oct 8 20:33:53 EA8500 cron.info cron[1416]: (CRON) STARTUP (fork ok)
Oct 8 20:33:53 EA8500 user.info : process_monitor : daemon successfully stopped
Oct 8 20:33:53 EA8500 daemon.info process_monitor[1327]: process_monitor : cleanup timers
Oct 8 20:33:53 EA8500 user.info : process_monitor : successfully started
Oct 8 20:33:53 EA8500 daemon.debug process_monitor[1424]: We need to re-update after 3600 seconds
Oct 8 20:33:53 EA8500 daemon.info process_monitor[1424]: process_monitor : set timer: 3600 seconds, callback: ntp_main()
Oct 8 20:33:53 EA8500 kern.info kernel: [ 17.964760] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Oct 8 20:33:53 EA8500 kern.info kernel: [ 17.964843] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
Oct 8 20:33:53 EA8500 kern.info kernel: [ 17.969408] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Oct 8 20:33:53 EA8500 kern.info kernel: [ 17.976731] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
Oct 8 20:33:53 EA8500 kern.info kernel: [ 17.986102] hub 1-0:1.0: USB hub found
Oct 8 20:33:53 EA8500 kern.info kernel: [ 17.991759] hub 1-0:1.0: 1 port detected
Oct 8 20:33:53 EA8500 kern.info kernel: [ 17.995511] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Oct 8 20:33:53 EA8500 kern.info kernel: [ 17.999369] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
Oct 8 20:33:53 EA8500 kern.info kernel: [ 18.004652] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Oct 8 20:33:53 EA8500 kern.info kernel: [ 18.012668] hub 2-0:1.0: USB hub found
Oct 8 20:33:53 EA8500 kern.info kernel: [ 18.020654] hub 2-0:1.0: 1 port detected
Oct 8 20:33:53 EA8500 kern.info kernel: [ 18.098694] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Oct 8 20:33:53 EA8500 kern.info kernel: [ 18.098743] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
Oct 8 20:33:53 EA8500 kern.info kernel: [ 18.103255] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Oct 8 20:33:53 EA8500 kern.info kernel: [ 18.110749] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
Oct 8 20:33:53 EA8500 kern.info kernel: [ 18.119962] hub 3-0:1.0: USB hub found
Oct 8 20:33:53 EA8500 kern.info kernel: [ 18.125766] hub 3-0:1.0: 1 port detected
Oct 8 20:33:53 EA8500 kern.info kernel: [ 18.129602] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Oct 8 20:33:53 EA8500 kern.info kernel: [ 18.133291] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
Oct 8 20:33:53 EA8500 kern.info kernel: [ 18.138676] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
Oct 8 20:33:53 EA8500 kern.info kernel: [ 18.146540] hub 4-0:1.0: USB hub found
Oct 8 20:33:53 EA8500 kern.info kernel: [ 18.154711] hub 4-0:1.0: 1 port detected
Oct 8 20:33:53 EA8500 kern.info kernel: [ 18.497823] usb 3-1: new high-speed USB device number 2 using xhci-hcd
Oct 8 20:33:57 EA8500 daemon.warn dnsmasq-dhcp[1217]: no address range available for DHCP request via br0
Oct 8 20:33:57 EA8500 daemon.warn dnsmasq-dhcp[1217]: no address range available for DHCP request via br0
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.193944] xhci-hcd xhci-hcd.1.auto: remove, state 1
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.193981] usb usb4: USB disconnect, device number 1
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.198509] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.203038] xhci-hcd xhci-hcd.1.auto: remove, state 1
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.208826] usb usb3: USB disconnect, device number 1
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.213682] usb 3-1: USB disconnect, device number 2
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.221082] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.224292] xhci-hcd xhci-hcd.0.auto: remove, state 1
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.229503] usb usb2: USB disconnect, device number 1
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.239123] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.239799] xhci-hcd xhci-hcd.0.auto: remove, state 1
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.245123] usb usb1: USB disconnect, device number 1
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.251220] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.305362] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.305447] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.309990] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.317306] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.326630] hub 1-0:1.0: USB hub found
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.332333] hub 1-0:1.0: 1 port detected
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.336103] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.339979] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.345256] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.353751] hub 2-0:1.0: USB hub found
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.361607] hub 2-0:1.0: 1 port detected
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.364972] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.368786] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.374151] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.381605] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.390882] hub 3-0:1.0: USB hub found
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.396565] hub 3-0:1.0: 1 port detected
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.400407] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.404115] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.409551] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.417449] hub 4-0:1.0: USB hub found
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.425534] hub 4-0:1.0: 1 port detected
Oct 8 20:33:58 EA8500 kern.notice kernel: [ 23.478865] SCSI subsystem initialized
Oct 8 20:33:58 EA8500 kern.info kernel: [ 23.577981] usbcore: registered new interface driver usb-storage
Oct 8 20:33:59 EA8500 kern.debug kernel: [ 23.653850] libata version 3.00 loaded.
Oct 8 20:33:59 EA8500 kern.info kernel: [ 23.691860] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
Oct 8 20:33:59 EA8500 kern.info kernel: [ 23.691912] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
Oct 8 20:33:59 EA8500 kern.info kernel: [ 23.696237] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
Oct 8 20:33:59 EA8500 kern.info kernel: [ 23.705552] scsi host0: ahci
Oct 8 20:33:59 EA8500 kern.info kernel: [ 23.713385] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 95
Oct 8 20:33:59 EA8500 kern.info kernel: [ 23.807622] usb 3-1: new high-speed USB device number 2 using xhci-hcd
Oct 8 20:33:59 EA8500 kern.info kernel: [ 23.968891] usb-storage 3-1:1.0: USB Mass Storage device detected
Oct 8 20:33:59 EA8500 kern.info kernel: [ 23.969114] scsi host1: usb-storage 3-1:1.0
Oct 8 20:33:59 EA8500 kern.info kernel: [ 24.039199] ata1: SATA link down (SStatus 0 SControl 300)
Oct 8 20:33:59 EA8500 kern.info kernel: [ 24.190775] sdhci: Secure Digital Host Controller Interface driver
Oct 8 20:33:59 EA8500 kern.info kernel: [ 24.190798] sdhci: Copyright(c) Pierre Ossman
Oct 8 20:33:59 EA8500 kern.info kernel: [ 24.203385] sdhci-pltfm: SDHCI platform and OF driver helper
Oct 8 20:34:00 EA8500 kern.notice kernel: [ 25.058651] scsi 1:0:0:0: Direct-Access USB Flash Drive 1.00 PQ: 0 ANSI: 6
Oct 8 20:34:00 EA8500 kern.notice kernel: [ 25.060197] sd 1:0:0:0: [sda] 30629376 512-byte logical blocks: (15.7 GB/14.6 GiB)
Oct 8 20:34:00 EA8500 kern.notice kernel: [ 25.066927] sd 1:0:0:0: [sda] Write Protect is off
Oct 8 20:34:00 EA8500 kern.debug kernel: [ 25.073269] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
Oct 8 20:34:00 EA8500 kern.notice kernel: [ 25.073538] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Oct 8 20:34:00 EA8500 kern.info kernel: [ 25.083468] sda: sda1
Oct 8 20:34:00 EA8500 kern.notice kernel: [ 25.089020] sd 1:0:0:0: [sda] Attached SCSI removable disk
Oct 8 20:34:00 EA8500 user.info : cron : daemon successfully stopped
Oct 8 20:34:00 EA8500 user.info : wsdd2 : windows service discovery daemon successfully stopped
Oct 8 20:34:00 EA8500 user.err wsdd2[1267]: Terminated received.
Oct 8 20:34:00 EA8500 user.info wsdd2[1267]: terminating.
Oct 8 20:34:00 EA8500 user.info : ksmbd.mountd : samba daemon successfully stopped
Oct 8 20:34:00 EA8500 local5.err ksmbd: [ksmbd-manager/1273]: ERROR: WARNING: child process exited abnormally: 1274
Oct 8 20:34:00 EA8500 kern.info kernel: [ 25.154141] ksmbd: kill command received
Oct 8 20:34:00 EA8500 user.err : Caught SIGSEGV (11) in memset
Oct 8 20:34:00 EA8500 user.err : Fault at memory location 0xbf045a07 due to address not mapped to object (1).
Oct 8 20:34:00 EA8500 user.err : Thread 1616: service
Oct 8 20:34:00 EA8500 user.err : === Context:
Oct 8 20:34:00 EA8500 user.err : TRAPNO:0000000e ERRCODE:0000080f OLDMASK:00000000 R0:befd8bbc
Oct 8 20:34:00 EA8500 user.err : R1:00000000 R2:0006ce4c R3:bf045a08 R4:befd8bbc
Oct 8 20:34:00 EA8500 user.err : R5:80808080 R6:fefefeff R7:b6ea1fa0 R8:00000001
Oct 8 20:34:00 EA8500 user.err : R9:befd8eb6 R10:0008b9ac FP:0008ed1c IP:010000ff
Oct 8 20:34:00 EA8500 user.err : SP:befd8b68 LR:b6f03074 PC:b6f02e14 CPSR:20000010
Oct 8 20:34:00 EA8500 user.err : FAULTADDR:bf045a07
Oct 8 20:34:00 EA8500 user.err : === Backtrace:
Oct 8 20:34:00 EA8500 user.err : # Searching frame 0 (FP=0x0008ed1c, PC=0xb6f02e14)
Oct 8 20:34:00 EA8500 user.err : Caught SIGSEGV (11) in memset
Oct 8 20:34:00 EA8500 user.err : Fault at memory location 0xbecc9a17 due to address not mapped to object (1).
Oct 8 20:34:00 EA8500 user.err : Thread 1617: service
Oct 8 20:34:00 EA8500 user.err : === Context:
Oct 8 20:34:00 EA8500 user.err : TRAPNO:0000000e ERRCODE:00000817 OLDMASK:00000000 R0:bec5cbcb
Oct 8 20:34:00 EA8500 user.err : R1:00000000 R2:0006ce4d R3:becc9a18 R4:bec5cbcb
Oct 8 20:34:00 EA8500 user.err : R5:80808080 R6:fefefeff R7:b6f26fa0 R8:00000001
Oct 8 20:34:00 EA8500 user.err : R9:bec5ceca R10:0008b9ac FP:0008ed1c IP:ff000300
Oct 8 20:34:00 EA8500 user.err : SP:bec5cb78 LR:b6f88074 PC:b6f87e14 CPSR:20000010
Oct 8 20:34:00 EA8500 user.err : FAULTADDR:becc9a17
Oct 8 20:34:00 EA8500 user.err : === Backtrace:
Oct 8 20:34:00 EA8500 user.err : # Searching frame 0 (FP=0x0008ed1c, PC=0xb6f87e14)
Oct 8 20:34:00 EA8500 user.err : # PC-1830[0xb6f865e4]: 0xe92d4ff0 stmfd sp!
Oct 8 20:34:00 EA8500 user.err : # FP-00[0x0008ed1c]: 0x00000000 {LR}
Oct 8 20:34:00 EA8500 user.err : # FP-04[0x0008ed18]: 0x00000000 {FP}
Oct 8 20:34:00 EA8500 user.err : # FP-08[0x0008ed14]: 0x00000000 {R10}
Oct 8 20:34:00 EA8500 user.err : # FP-0c[0x0008ed10]: 0x00000000 {R9}
Oct 8 20:34:00 EA8500 user.err : # FP-10[0x0008ed0c]: 0x00000000 {R8}
Oct 8 20:34:00 EA8500 user.err : # FP-14[0x0008ed08]: 0x00000000 {R7}
Oct 8 20:34:00 EA8500 user.err : # FP-18[0x0008ed04]: 0x00000000 {R6}
Oct 8 20:34:00 EA8500 user.err : # FP-1c[0x0008ed00]: 0x00000000 {R5}
Oct 8 20:34:00 EA8500 user.err : # FP-20[0x0008ecfc]: 0x00000000 {R4}
Oct 8 20:34:00 EA8500 user.err : # Crashed at /lib/ld-musl-armhf.so.1[0xb6f3e000](memset+0x00000018)[0xb6f87e14]
Oct 8 20:34:00 EA8500 user.err : # Searching frame 1 (FP=0x00000000, PC=0x00000000)
Oct 8 20:34:00 EA8500 user.err : # Instruction at 0x00000000 is not mapped; terminating backtrace.
Oct 8 20:34:00 EA8500 user.err : /lib/ld-musl-armhf.so.1[0xb6f3e000](memset+0x00000018)[0xb6f87e14]
Oct 8 20:34:00 EA8500 user.err : ???(+0)[0x00000000]
Oct 8 20:34:00 EA8500 user.err : === Code:
Oct 8 20:34:00 EA8500 user.err : b6f87dd4: ea000002 e5d03000 e1530001 0a000004 e152000c e1a00002 e2422001 1afffff8
Oct 8 20:34:00 EA8500 user.err : b6f87df4: e3a00000 e12fff1e e3520000 012fff1e e6ef1071 e1a03000 e3520002 e6c31002
Oct 8 20:34:00 EA8500 user.err : b6f87e14: >e5431001 912fff1e e3a0c000 e3520006 e7c7c011 e7cfc411 e1c0c0b1 e143c0b3
Oct 8 20:34:00 EA8500 user.err : b6f87e34: 912fff1e e3520008 e5c01003 e5431004 912fff1e e52d4008 e0811401 e58de004
Oct 8 20:34:00 EA8500 user.err : # PC-1830[0xb6f015e4]: 0xe92d4ff0 stmfd sp!
Oct 8 20:34:00 EA8500 user.err : # FP-00[0x0008ed1c]: 0x00000000 {LR}
Oct 8 20:34:00 EA8500 user.err : # FP-04[0x0008ed18]: 0x00000000 {FP}
Oct 8 20:34:00 EA8500 user.err : # FP-08[0x0008ed14]: 0x00000000 {R10}
Oct 8 20:34:00 EA8500 user.err : # FP-0c[0x0008ed10]: 0x00000000 {R9}
Oct 8 20:34:00 EA8500 user.err : # FP-10[0x0008ed0c]: 0x00000000 {R8}
Oct 8 20:34:00 EA8500 user.err : # FP-14[0x0008ed08]: 0x00000000 {R7}
Oct 8 20:34:00 EA8500 user.err : # FP-18[0x0008ed04]: 0x00000000 {R6}
Oct 8 20:34:00 EA8500 user.err : # FP-1c[0x0008ed00]: 0x00000000 {R5}
Oct 8 20:34:00 EA8500 user.err : # FP-20[0x0008ecfc]: 0x00000000 {R4}
Oct 8 20:34:00 EA8500 user.err : # Crashed at /lib/ld-musl-armhf.so.1[0xb6eb9000](memset+0x00000018)[0xb6f02e14]
Oct 8 20:34:00 EA8500 user.err : # Searching frame 1 (FP=0x00000000, PC=0x00000000)
Oct 8 20:34:00 EA8500 user.err : # Instruction at 0x00000000 is not mapped; terminating backtrace.
Oct 8 20:34:00 EA8500 user.err : /lib/ld-musl-armhf.so.1[0xb6eb9000](memset+0x00000018)[0xb6f02e14]
Oct 8 20:34:00 EA8500 user.err : ???(+0)[0x00000000]
Oct 8 20:34:00 EA8500 user.err : === Code:
Oct 8 20:34:00 EA8500 user.err : b6f02dd4: ea000002 e5d03000 e1530001 0a000004 e152000c e1a00002 e2422001 1afffff8
Oct 8 20:34:00 EA8500 user.err : b6f02df4: e3a00000 e12fff1e e3520000 012fff1e e6ef1071 e1a03000 e3520002 e6c31002
Oct 8 20:34:00 EA8500 user.err : b6f02e14: >e5431001 912fff1e e3a0c000 e3520006 e7c7c011 e7cfc411 e1c0c0b1 e143c0b3
Oct 8 20:34:00 EA8500 user.err : b6f02e34: 912fff1e e3520008 e5c01003 e5431004 912fff1e e52d4008 e0811401 e58de004
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.241432] xhci-hcd xhci-hcd.1.auto: remove, state 1
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.241470] usb usb4: USB disconnect, device number 1
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.245959] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.250585] xhci-hcd xhci-hcd.1.auto: remove, state 1
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.256237] usb usb3: USB disconnect, device number 1
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.261238] usb 3-1: USB disconnect, device number 2
Oct 8 20:35:39 EA8500 user.err : Caught SIGSEGV (11) in memset
Oct 8 20:35:39 EA8500 user.err : Caught SIGSEGV (11) in memset
Oct 8 20:35:39 EA8500 user.err : Fault at memory location 0xbeb7fa17 due to address not mapped to object (1).
Oct 8 20:35:39 EA8500 user.err : Thread 1787: service
Oct 8 20:35:39 EA8500 user.err : Fault at memory location 0xbe93d9f7 due to address not mapped to object (1).
Oct 8 20:35:39 EA8500 user.err : === Context:
Oct 8 20:35:39 EA8500 user.err : TRAPNO:0000000e ERRCODE:00000817 OLDMASK:00000000 R0:beb12bcb
Oct 8 20:35:39 EA8500 user.err : R1:00000000 R2:0006ce4d R3:beb7fa18 R4:beb12bcb
Oct 8 20:35:39 EA8500 user.err : Thread 1788: service
Oct 8 20:35:39 EA8500 user.err : === Context:
Oct 8 20:35:39 EA8500 user.err : TRAPNO:0000000e ERRCODE:00000817 OLDMASK:00000000 R0:be8d0bac
Oct 8 20:35:39 EA8500 user.err : R5:80808080 R6:fefefeff R7:b6ed6fa0 R8:00000001
Oct 8 20:35:39 EA8500 user.err : R1:00000000 R2:0006ce4c R3:be93d9f8 R4:be8d0bac
Oct 8 20:35:39 EA8500 user.err : R9:beb12ec7 R10:0008b9ac FP:0008ed1c IP:ff000300
Oct 8 20:35:39 EA8500 user.err : R5:80808080 R6:fefefeff R7:b6eecfa0 R8:00000001
Oct 8 20:35:39 EA8500 user.err : SP:beb12b78 LR:b6f38074 PC:b6f37e14 CPSR:20000010
Oct 8 20:35:39 EA8500 user.err : R9:be8d0eb3 R10:0008b9ac FP:0008ed1c IP:010000ff
Oct 8 20:35:39 EA8500 user.err : FAULTADDR:beb7fa17
Oct 8 20:35:39 EA8500 user.err : === Backtrace:
Oct 8 20:35:39 EA8500 user.err : # Searching frame 0 (FP=0x0008ed1c, PC=0xb6f37e14)
Oct 8 20:35:39 EA8500 user.err : SP:be8d0b58 LR:b6f4e074 PC:b6f4de14 CPSR:20000010
Oct 8 20:35:39 EA8500 user.err : FAULTADDR:be93d9f7
Oct 8 20:35:39 EA8500 user.err : === Backtrace:
Oct 8 20:35:39 EA8500 user.err : # Searching frame 0 (FP=0x0008ed1c, PC=0xb6f4de14)
Oct 8 20:35:39 EA8500 user.err : # PC-1830[0xb6f365e4]: 0xe92d4ff0 stmfd sp!
Oct 8 20:35:39 EA8500 user.err : # FP-00[0x0008ed1c]: 0x00000000 {LR}
Oct 8 20:35:39 EA8500 user.err : # FP-04[0x0008ed18]: 0x00000000 {FP}
Oct 8 20:35:39 EA8500 user.err : # FP-08[0x0008ed14]: 0x00000000 {R10}
Oct 8 20:35:39 EA8500 user.err : # FP-0c[0x0008ed10]: 0x00000000 {R9}
Oct 8 20:35:39 EA8500 user.err : # FP-10[0x0008ed0c]: 0x00000000 {R8}
Oct 8 20:35:39 EA8500 user.err : # FP-14[0x0008ed08]: 0x00000000 {R7}
Oct 8 20:35:39 EA8500 user.err : # FP-18[0x0008ed04]: 0x00000000 {R6}
Oct 8 20:35:39 EA8500 user.err : # FP-1c[0x0008ed00]: 0x00000000 {R5}
Oct 8 20:35:39 EA8500 user.err : # FP-20[0x0008ecfc]: 0x00000000 {R4}
Oct 8 20:35:39 EA8500 user.err : # Crashed at /lib/ld-musl-armhf.so.1[0xb6eee000](memset+0x00000018)[0xb6f37e14]
Oct 8 20:35:39 EA8500 user.err : # Searching frame 1 (FP=0x00000000, PC=0x00000000)
Oct 8 20:35:39 EA8500 user.err : # Instruction at 0x00000000 is not mapped; terminating backtrace.
Oct 8 20:35:39 EA8500 user.err : /lib/ld-musl-armhf.so.1[0xb6eee000](memset+0x00000018)[0xb6f37e14]
Oct 8 20:35:39 EA8500 user.err : ???(+0)[0x00000000]
Oct 8 20:35:39 EA8500 user.err : === Code:
Oct 8 20:35:39 EA8500 user.err : b6f37dd4: ea000002 e5d03000 e1530001 0a000004 e152000c e1a00002 e2422001 1afffff8
Oct 8 20:35:39 EA8500 user.err : b6f37df4: e3a00000 e12fff1e e3520000 012fff1e e6ef1071 e1a03000 e3520002 e6c31002
Oct 8 20:35:39 EA8500 user.err : b6f37e14: >e5431001 912fff1e e3a0c000 e3520006 e7c7c011 e7cfc411 e1c0c0b1 e143c0b3
Oct 8 20:35:39 EA8500 user.err : b6f37e34: 912fff1e e3520008 e5c01003 e5431004 912fff1e e52d4008 e0811401 e58de004
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.323034] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.335039] xhci-hcd xhci-hcd.0.auto: remove, state 1
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.341859] usb usb2: USB disconnect, device number 1
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.357125] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
Oct 8 20:35:39 EA8500 user.err : # PC-1830[0xb6f4c5e4]: 0xe92d4ff0 stmfd sp!
Oct 8 20:35:39 EA8500 user.err : # FP-00[0x0008ed1c]: 0x00000000 {LR}
Oct 8 20:35:39 EA8500 user.err : # FP-04[0x0008ed18]: 0x00000000 {FP}
Oct 8 20:35:39 EA8500 user.err : # FP-08[0x0008ed14]: 0x00000000 {R10}
Oct 8 20:35:39 EA8500 user.err : # FP-0c[0x0008ed10]: 0x00000000 {R9}
Oct 8 20:35:39 EA8500 user.err : # FP-10[0x0008ed0c]: 0x00000000 {R8}
Oct 8 20:35:39 EA8500 user.err : # FP-14[0x0008ed08]: 0x00000000 {R7}
Oct 8 20:35:39 EA8500 user.err : # FP-18[0x0008ed04]: 0x00000000 {R6}
Oct 8 20:35:39 EA8500 user.err : # FP-1c[0x0008ed00]: 0x00000000 {R5}
Oct 8 20:35:39 EA8500 user.err : # FP-20[0x0008ecfc]: 0x00000000 {R4}
Oct 8 20:35:39 EA8500 user.err : # Crashed at /lib/ld-musl-armhf.so.1[0xb6f04000](memset+0x00000018)[0xb6f4de14]
Oct 8 20:35:39 EA8500 user.err : # Searching frame 1 (FP=0x00000000, PC=0x00000000)
Oct 8 20:35:39 EA8500 user.err : # Instruction at 0x00000000 is not mapped; terminating backtrace.
Oct 8 20:35:39 EA8500 user.err : /lib/ld-musl-armhf.so.1[0xb6f04000](memset+0x00000018)[0xb6f4de14]
Oct 8 20:35:39 EA8500 user.err : ???(+0)[0x00000000]
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.371088] xhci-hcd xhci-hcd.0.auto: remove, state 1
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.379783] usb usb1: USB disconnect, device number 1
Oct 8 20:35:39 EA8500 user.err : === Code:
Oct 8 20:35:39 EA8500 user.err : b6f4ddd4: ea000002 e5d03000 e1530001 0a000004 e152000c e1a00002 e2422001 1afffff8
Oct 8 20:35:39 EA8500 user.err : b6f4ddf4: e3a00000 e12fff1e e3520000 012fff1e e6ef1071 e1a03000 e3520002 e6c31002
Oct 8 20:35:39 EA8500 user.err : b6f4de14: >e5431001 912fff1e e3a0c000 e3520006 e7c7c011 e7cfc411 e1c0c0b1 e143c0b3
Oct 8 20:35:39 EA8500 user.err : b6f4de34: 912fff1e e3520008 e5c01003 e5431004 912fff1e e52d4008 e0811401 e58de004
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.390315] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.425449] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.434412] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.440047] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.447397] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.456639] hub 1-0:1.0: USB hub found
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.462592] hub 1-0:1.0: 1 port detected
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.471894] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.475520] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.481554] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.489364] hub 2-0:1.0: USB hub found
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.497099] hub 2-0:1.0: 1 port detected
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.503297] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.512143] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.517831] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.525183] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.534449] hub 3-0:1.0: USB hub found
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.543343] hub 3-0:1.0: 1 port detected
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.549692] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.553301] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.558923] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.566632] hub 4-0:1.0: USB hub found
Oct 8 20:35:39 EA8500 kern.info kernel: [ 124.578146] hub 4-0:1.0: 1 port detected
Oct 8 20:35:40 EA8500 kern.info kernel: [ 124.907831] usb 3-1: new high-speed USB device number 2 using xhci-hcd
Oct 8 20:35:40 EA8500 kern.info kernel: [ 125.068974] usb-storage 3-1:1.0: USB Mass Storage device detected
Oct 8 20:35:40 EA8500 kern.info kernel: [ 125.072508] scsi host1: usb-storage 3-1:1.0
Oct 8 20:35:41 EA8500 kern.notice kernel: [ 126.088169] scsi 1:0:0:0: Direct-Access USB Flash Drive 1.00 PQ: 0 ANSI: 6
Oct 8 20:35:41 EA8500 kern.notice kernel: [ 126.089089] sd 1:0:0:0: [sda] 30629376 512-byte logical blocks: (15.7 GB/14.6 GiB)
Oct 8 20:35:41 EA8500 kern.notice kernel: [ 126.095759] sd 1:0:0:0: [sda] Write Protect is off
Oct 8 20:35:41 EA8500 kern.debug kernel: [ 126.102768] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
Oct 8 20:35:41 EA8500 kern.notice kernel: [ 126.103287] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Oct 8 20:35:41 EA8500 kern.info kernel: [ 126.110003] sda: sda1
Oct 8 20:35:41 EA8500 kern.notice kernel: [ 126.118849] sd 1:0:0:0: [sda] Attached SCSI removable disk
Oct 8 20:35:41 EA8500 user.err : Caught SIGSEGV (11) in memset
Oct 8 20:35:41 EA8500 user.err : Caught SIGSEGV (11) in memset
Oct 8 20:35:41 EA8500 user.err : Fault at memory location 0xbeedea07 due to address not mapped to object (1).
Oct 8 20:35:41 EA8500 user.err : Thread 1862: service
Oct 8 20:35:41 EA8500 user.err : Fault at memory location 0xbed02a17 due to address not mapped to object (1).
Oct 8 20:35:41 EA8500 user.err : === Context:
Oct 8 20:35:41 EA8500 user.err : Thread 1861: service
Oct 8 20:35:41 EA8500 user.err : TRAPNO:0000000e ERRCODE:00000817 OLDMASK:00000000 R0:bee71bbc
Oct 8 20:35:41 EA8500 user.err : === Context:
Oct 8 20:35:41 EA8500 user.err : TRAPNO:0000000e ERRCODE:00000817 OLDMASK:00000000 R0:bec95bcb
Oct 8 20:35:41 EA8500 user.err : R1:00000000 R2:0006ce4c R3:beedea08 R4:bee71bbc
Oct 8 20:35:41 EA8500 user.err : R5:80808080 R6:fefefeff R7:b6f29fa0 R8:00000001
Oct 8 20:35:41 EA8500 user.err : R9:bee71eb5 R10:0008b9ac FP:0008ed1c IP:010000ff
Oct 8 20:35:41 EA8500 user.err : SP:bee71b68 LR:b6f8b074 PC:b6f8ae14 CPSR:20000010
Oct 8 20:35:41 EA8500 user.err : FAULTADDR:beedea07
Oct 8 20:35:41 EA8500 user.err : === Backtrace:
Oct 8 20:35:41 EA8500 user.err : # Searching frame 0 (FP=0x0008ed1c, PC=0xb6f8ae14)
Oct 8 20:35:41 EA8500 user.err : R1:00000000 R2:0006ce4d R3:bed02a18 R4:bec95bcb
Oct 8 20:35:41 EA8500 user.err : R5:80808080 R6:fefefeff R7:b6f5afa0 R8:00000001
Oct 8 20:35:41 EA8500 user.err : R9:bec95ec9 R10:0008b9ac FP:0008ed1c IP:ff000300
Oct 8 20:35:41 EA8500 user.err : SP:bec95b78 LR:b6fbc074 PC:b6fbbe14 CPSR:20000010
Oct 8 20:35:41 EA8500 user.err : FAULTADDR:bed02a17
Oct 8 20:35:41 EA8500 user.err : === Backtrace:
Oct 8 20:35:41 EA8500 user.err : # Searching frame 0 (FP=0x0008ed1c, PC=0xb6fbbe14)
Oct 8 20:35:41 EA8500 user.err : # PC-1830[0xb6f895e4]: 0xe92d4ff0 stmfd sp!
Oct 8 20:35:41 EA8500 user.err : # FP-00[0x0008ed1c]: 0x00000000 {LR}
Oct 8 20:35:41 EA8500 user.err : # FP-04[0x0008ed18]: 0x00000000 {FP}
Oct 8 20:35:41 EA8500 user.err : # FP-08[0x0008ed14]: 0x00000000 {R10}
Oct 8 20:35:41 EA8500 user.err : # FP-0c[0x0008ed10]: 0x00000000 {R9}
Oct 8 20:35:41 EA8500 user.err : # FP-10[0x0008ed0c]: 0x00000000 {R8}
Oct 8 20:35:41 EA8500 user.err : # FP-14[0x0008ed08]: 0x00000000 {R7}
Oct 8 20:35:41 EA8500 user.err : # FP-18[0x0008ed04]: 0x00000000 {R6}
Oct 8 20:35:41 EA8500 user.err : # FP-1c[0x0008ed00]: 0x00000000 {R5}
Oct 8 20:35:41 EA8500 user.err : # FP-20[0x0008ecfc]: 0x00000000 {R4}
Oct 8 20:35:41 EA8500 user.err : # Crashed at /lib/ld-musl-armhf.so.1[0xb6f41000](memset+0x00000018)[0xb6f8ae14]
Oct 8 20:35:41 EA8500 user.err : # Searching frame 1 (FP=0x00000000, PC=0x00000000)
Oct 8 20:35:41 EA8500 user.err : # Instruction at 0x00000000 is not mapped; terminating backtrace.
Oct 8 20:35:41 EA8500 user.err : /lib/ld-musl-armhf.so.1[0xb6f41000](memset+0x00000018)[0xb6f8ae14]
Oct 8 20:35:41 EA8500 user.err : ???(+0)[0x00000000]
Oct 8 20:35:41 EA8500 user.err : === Code:
Oct 8 20:35:41 EA8500 user.err : b6f8add4: ea000002 e5d03000 e1530001 0a000004 e152000c e1a00002 e2422001 1afffff8
Oct 8 20:35:41 EA8500 user.err : b6f8adf4: e3a00000 e12fff1e e3520000 012fff1e e6ef1071 e1a03000 e3520002 e6c31002
Oct 8 20:35:41 EA8500 user.err : b6f8ae14: >e5431001 912fff1e e3a0c000 e3520006 e7c7c011 e7cfc411 e1c0c0b1 e143c0b3
Oct 8 20:35:41 EA8500 user.err : b6f8ae34: 912fff1e e3520008 e5c01003 e5431004 912fff1e e52d4008 e0811401 e58de004
Oct 8 20:35:41 EA8500 user.err : # PC-1830[0xb6fba5e4]: 0xe92d4ff0 stmfd sp!
Oct 8 20:35:41 EA8500 user.err : # FP-00[0x0008ed1c]: 0x00000000 {LR}
Oct 8 20:35:41 EA8500 user.err : # FP-04[0x0008ed18]: 0x00000000 {FP}
Oct 8 20:35:41 EA8500 user.err : # FP-08[0x0008ed14]: 0x00000000 {R10}
Oct 8 20:35:41 EA8500 user.err : # FP-0c[0x0008ed10]: 0x00000000 {R9}
Oct 8 20:35:41 EA8500 user.err : # FP-10[0x0008ed0c]: 0x00000000 {R8}
Oct 8 20:35:41 EA8500 user.err : # FP-14[0x0008ed08]: 0x00000000 {R7}
Oct 8 20:35:41 EA8500 user.err : # FP-18[0x0008ed04]: 0x00000000 {R6}
Oct 8 20:35:41 EA8500 user.err : # FP-1c[0x0008ed00]: 0x00000000 {R5}
Oct 8 20:35:41 EA8500 user.err : # FP-20[0x0008ecfc]: 0x00000000 {R4}
Oct 8 20:35:41 EA8500 user.err : # Crashed at /lib/ld-musl-armhf.so.1[0xb6f72000](memset+0x00000018)[0xb6fbbe14]
Oct 8 20:35:41 EA8500 user.err : # Searching frame 1 (FP=0x00000000, PC=0x00000000)
Oct 8 20:35:41 EA8500 user.err : # Instruction at 0x00000000 is not mapped; terminating backtrace.
Oct 8 20:35:41 EA8500 user.err : /lib/ld-musl-armhf.so.1[0xb6f72000](memset+0x00000018)[0xb6fbbe14]
Oct 8 20:35:41 EA8500 user.err : ???(+0)[0x00000000]
Oct 8 20:35:41 EA8500 user.err : === Code:
Oct 8 20:35:41 EA8500 user.err : b6fbbdd4: ea000002 e5d03000 e1530001 0a000004 e152000c e1a00002 e2422001 1afffff8
Oct 8 20:35:41 EA8500 user.err : b6fbbdf4: e3a00000 e12fff1e e3520000 012fff1e e6ef1071 e1a03000 e3520002 e6c31002
Oct 8 20:35:41 EA8500 user.err : b6fbbe14: >e5431001 912fff1e e3a0c000 e3520006 e7c7c011 e7cfc411 e1c0c0b1 e143c0b3
Oct 8 20:35:41 EA8500 user.err : b6fbbe34: 912fff1e e3520008 e5c01003 e5431004 912fff1e e52d4008 e0811401 e58de004
Oct 8 20:41:36 EA8500 authpriv.info dropbear[2039]: Child connection from 10.72.28.16:55242
Oct 8 20:41:36 EA8500 authpriv.notice dropbear[2039]: Pubkey auth succeeded for 'root' with key md5 02:dd:6e:8e:c8:bb:bc:e9:23:24:92:0d:ea:2c:7b:17 from 10.72.28.16:55242
root@EA8500:~# uptime
20:42:36 up 9 min, load average: 0.02, 0.06, 0.05
root@EA8500:~# date
Thu Oct 8 20:42:37 CDT 2020
root@EA8500:~# ubootenv set boot_part 2 && reboot
a_pEnv->crc = cd7de424
crc32 = cd7de424
root@EA8500:~# Connection to ea8500.mrjcd.com closed by remote host.
Connection to ea8500.mrjcd.com closed.
::::::::::::::::::::::::::::::::::::::::::
mrjcd@Fat-Deb:~$ ssh root@ea8500.mrjcd.com
DD-WRT v3.0-r44494 std (c) 2020 NewMedia-NET GmbH
Release: 10/05/20
Board: Linksys EA8500
==========================================================
___ ___ _ _____ ______ ____ ___
/ _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \
/ // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // /
/____/____/ |__/|__/_/|_| /_/ |___/____(_)___/
DD-WRT v3.0
http://www.dd-wrt.com
==========================================================
BusyBox v1.32.0 (2020-10-05 01:05:26 +03) built-in shell (ash)
root@EA8500:~# ps
PID USER VSZ STAT COMMAND
1 root 1036 S /sbin/init
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
4 root 0 SW [kworker/0:0]
5 root 0 SW< [kworker/0:0H]
6 root 0 SW [kworker/u4:0]
7 root 0 SW [rcu_sched]
8 root 0 SW [rcu_bh]
9 root 0 SW [migration/0]
10 root 0 SW< [lru-add-drain]
11 root 0 SW [cpuhp/0]
12 root 0 SW [cpuhp/1]
13 root 0 SW [migration/1]
14 root 0 SW [ksoftirqd/1]
15 root 0 SW [kworker/1:0]
16 root 0 SW< [kworker/1:0H]
17 root 0 SW [oom_reaper]
18 root 0 SW< [writeback]
19 root 0 SW [kcompactd0]
20 root 0 SW< [crypto]
21 root 0 SW< [bioset]
22 root 0 SW< [kblockd]
23 root 0 SW< [kworker/u5:0]
24 root 0 SW< [watchdogd]
26 root 0 SW [kworker/0:1]
43 root 0 SW [kswapd0]
44 root 0 SW< [vmstat]
70 root 0 SW< [cryptodev_queue]
71 root 0 SW [kworker/1:1]
72 root 0 SW [kworker/u4:1]
74 root 0 SW< [bioset]
75 root 0 SW< [bioset]
76 root 0 SW< [bioset]
77 root 0 SW< [bioset]
78 root 0 SW< [bioset]
79 root 0 SW< [bioset]
80 root 0 SW< [bioset]
81 root 0 SW< [bioset]
82 root 0 SW< [bioset]
83 root 0 SW< [bioset]
84 root 0 SW< [bioset]
85 root 0 SW< [bioset]
86 root 0 SW< [bioset]
87 root 0 SW< [bioset]
88 root 0 SW< [bioset]
89 root 0 SW< [bioset]
90 root 0 SW< [bioset]
91 root 0 SW< [bioset]
92 root 0 SW< [bioset]
97 root 0 SW< [kworker/0:1H]
98 root 0 SW< [kworker/1:1H]
760 root 732 S /sbin/hotplug2 --set-rules-file /etc/hotplug2.rules --persistent
764 root 780 S /sbin/mstpd
772 root 960 S irqbalance -t 10
777 root 1772 S watchdog
803 root 0 SW< [cfg80211]
804 root 0 SW [kworker/0:2]
814 root 0 SW< [ath10k_wq]
815 root 0 SW< [ath10k_aux_wq]
816 root 0 SW< [ath10k_tx_compl]
817 root 0 SW< [kworker/u5:1]
818 root 0 SW< [kworker/u5:2]
819 root 0 SW [kworker/u4:2]
821 root 0 SW< [ath10k_wq]
822 root 0 SW< [ath10k_aux_wq]
823 root 0 SW< [ath10k_tx_compl]
837 root 0 SW [kworker/1:2]
1094 root 1368 S syslogd -Z -L
1096 root 1368 S klogd
1105 root 1044 S dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_rsa_key -p 22 -s
1153 root 3320 S /tmp/openvpnserver --config /tmp/openvpn/openvpn.conf --daemon
1229 root 1732 S dnsmasq -u root -g root -C /tmp/dnsmasq.conf
1240 root 1732 S wland
1361 root 3964 S httpd -n -p 80
1365 root 1432 S resetbutton
1424 root 1772 S process_monitor
1504 root 0 SW< [ata_sff]
1509 root 0 SW [scsi_eh_0]
1510 root 0 SW< [scsi_tmf_0]
1512 root 0 SW [scsi_eh_1]
1514 root 0 SW< [scsi_tmf_1]
1515 root 0 SW [usb-storage]
1606 root 0 SW< [bioset]
1671 root 0 SW [jbd2/sda1-8]
1672 root 0 SW< [ext4-rsv-conver]
1698 root 708 S cron
1783 root 724 S wsdd2 -d -N EA8500 -G WORKGROUP -b vendor:dd-wrt,model:Linksys EA8500,sku:44494
1787 root 1196 S ksmbd.mountd -c /tmp/smb.conf -u /tmp/smb.db
1789 root 1224 S ksmbd.mountd -c /tmp/smb.conf -u /tmp/smb.db
1794 root 0 SW [ksmbd-vlan15]
1796 root 0 SW [ksmbd-br0]
1798 root 0 SW [ksmbd-eth1]
1801 root 0 SW [ksmbd-eth0]
1813 root 724 S wsdd2 -d -N EA8500 -G WORKGROUP -b vendor:dd-wrt,model:Linksys EA8500,sku:44494
1838 root 1100 R dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_rsa_key -p 22 -s
1839 root 1368 S -sh
1841 root 1368 R ps
root@EA8500:~# cat /tmp/disktype.dump
--- /dev/sda
Block device, size 14.61 GiB (15682240512 bytes)
DOS/MBR partition map
Partition 1: 14.60 GiB (15680405504 bytes, 30625792 sectors from 2048)
Type 0x83 (Linux)
Ext4 file system
Volume name "16GBext4"
UUID 0CFDEE24-2710-4FFF-A543-0F8AFB91A82F (DCE, v4)
Last mounted at "/media/mrjcd/16GBext4"
Volume size 14.60 GiB (15680405504 bytes, 3828224 blocks of 4 KiB)
<b>/dev/sda</b> not mounted <b>Unsupported Filesystem</b><hr>
--- /dev/sda1
Block device, size 14.60 GiB (15680405504 bytes)
Ext4 file system
Volume name "16GBext4"
UUID 0CFDEE24-2710-4FFF-A543-0F8AFB91A82F (DCE, v4)
Last mounted at "/media/mrjcd/16GBext4"
Volume size 14.60 GiB (15680405504 bytes, 3828224 blocks of 4 KiB)
<b>/dev/sda1</b> mounted to <b>/tmp/mnt/sda1</b><hr>
root@EA8500:~# ps
PID USER VSZ STAT COMMAND
1 root 1036 S /sbin/init
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
4 root 0 SW [kworker/0:0]
5 root 0 SW< [kworker/0:0H]
6 root 0 SW [kworker/u4:0]
7 root 0 SW [rcu_sched]
8 root 0 SW [rcu_bh]
9 root 0 SW [migration/0]
10 root 0 SW< [lru-add-drain]
11 root 0 SW [cpuhp/0]
12 root 0 SW [cpuhp/1]
13 root 0 SW [migration/1]
14 root 0 SW [ksoftirqd/1]
15 root 0 SW [kworker/1:0]
16 root 0 SW< [kworker/1:0H]
17 root 0 SW [oom_reaper]
18 root 0 SW< [writeback]
19 root 0 SW [kcompactd0]
20 root 0 SW< [crypto]
21 root 0 SW< [bioset]
22 root 0 SW< [kblockd]
23 root 0 SW< [kworker/u5:0]
24 root 0 SW< [watchdogd]
26 root 0 SW [kworker/0:1]
43 root 0 SW [kswapd0]
44 root 0 SW< [vmstat]
70 root 0 SW< [cryptodev_queue]
71 root 0 SW [kworker/1:1]
72 root 0 RW [kworker/u4:1]
74 root 0 SW< [bioset]
75 root 0 SW< [bioset]
76 root 0 SW< [bioset]
77 root 0 SW< [bioset]
78 root 0 SW< [bioset]
79 root 0 SW< [bioset]
80 root 0 SW< [bioset]
81 root 0 SW< [bioset]
82 root 0 SW< [bioset]
83 root 0 SW< [bioset]
84 root 0 SW< [bioset]
85 root 0 SW< [bioset]
86 root 0 SW< [bioset]
87 root 0 SW< [bioset]
88 root 0 SW< [bioset]
89 root 0 SW< [bioset]
90 root 0 SW< [bioset]
91 root 0 SW< [bioset]
92 root 0 SW< [bioset]
97 root 0 SW< [kworker/0:1H]
98 root 0 SW< [kworker/1:1H]
760 root 732 S /sbin/hotplug2 --set-rules-file /etc/hotplug2.rules --persistent
764 root 780 S /sbin/mstpd
772 root 960 S irqbalance -t 10
777 root 1772 S watchdog
803 root 0 SW< [cfg80211]
804 root 0 SW [kworker/0:2]
814 root 0 SW< [ath10k_wq]
815 root 0 SW< [ath10k_aux_wq]
816 root 0 SW< [ath10k_tx_compl]
817 root 0 SW< [kworker/u5:1]
818 root 0 SW< [kworker/u5:2]
819 root 0 SW [kworker/u4:2]
821 root 0 SW< [ath10k_wq]
822 root 0 SW< [ath10k_aux_wq]
823 root 0 SW< [ath10k_tx_compl]
837 root 0 SW [kworker/1:2]
1094 root 1368 S syslogd -Z -L
1096 root 1368 S klogd
1105 root 1044 S dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_rsa_key -p 22 -s
1153 root 3320 S /tmp/openvpnserver --config /tmp/openvpn/openvpn.conf --daemon
1229 root 1732 S dnsmasq -u root -g root -C /tmp/dnsmasq.conf
1240 root 1732 S wland
1361 root 3964 S httpd -n -p 80
1365 root 1432 S resetbutton
1424 root 1772 S process_monitor
1504 root 0 SW< [ata_sff]
1509 root 0 SW [scsi_eh_0]
1510 root 0 SW< [scsi_tmf_0]
1512 root 0 SW [scsi_eh_1]
1514 root 0 SW< [scsi_tmf_1]
1515 root 0 SW [usb-storage]
1606 root 0 SW< [bioset]
1671 root 0 SW [jbd2/sda1-8]
1672 root 0 SW< [ext4-rsv-conver]
1698 root 708 S cron
1783 root 724 S wsdd2 -d -N EA8500 -G WORKGROUP -b vendor:dd-wrt,model:Linksys EA8500,sku:44494
1787 root 1196 S ksmbd.mountd -c /tmp/smb.conf -u /tmp/smb.db
1789 root 1224 S ksmbd.mountd -c /tmp/smb.conf -u /tmp/smb.db
1794 root 0 SW [ksmbd-vlan15]
1796 root 0 SW [ksmbd-br0]
1798 root 0 SW [ksmbd-eth1]
1801 root 0 SW [ksmbd-eth0]
1813 root 724 S wsdd2 -d -N EA8500 -G WORKGROUP -b vendor:dd-wrt,model:Linksys EA8500,sku:44494
1838 root 1100 R dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_rsa_key -p 22 -s
1839 root 1368 S -sh
1843 root 1368 R ps
root@EA8500:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.237 (root@server2) (gcc version 10.0.1 (OpenWrt GCC 10.0.1 r12423-0493d57e04) ) #697 SMP Fri Oct 2 00:35:19 +03 2020
[ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt:Machine model: Linksys EA8500 WiFi Router
[ 0.000000] OF: fdt:Ignoring memory range 0x41500000 - 0x42000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 122880
[ 0.000000] free_area_init_node: node 0, pgdat c0b2dd80, node_mem_map ddc39000
[ 0.000000] Normal zone: 960 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 122880 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 12 pages/cpu s19084 r8192 d21876 u49152
[ 0.000000] pcpu-alloc: s19084 r8192 d21876 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920
[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:16
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 478232K/491520K available (6144K kernel code, 186K rwdata, 1016K rodata, 1024K init, 407K bss, 13288K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xde800000 - 0xff800000 ( 528 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc0900000 (7136 kB)
[ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
[ 0.000000] .data : 0xc0b00000 - 0xc0b2ebb8 ( 187 kB)
[ 0.000000] .bss : 0xc0b30000 - 0xc0b95ecc ( 408 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[ 0.000009] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[ 0.000023] Switching to timer-based delay loop, resolution 160ns
[ 0.000186] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[ 0.000208] pid_max: default: 32768 minimum: 301
[ 0.000316] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000330] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000917] CPU: Testing write buffer coherency: ok
[ 0.001208] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001258] Setting up static identity map for 0x42300000 - 0x4230003c
[ 0.004311] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.004484] Brought up 2 CPUs
[ 0.004505] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[ 0.004514] CPU: All CPU(s) started in SVC mode.
[ 0.016733] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[ 0.016921] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.016950] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.017022] pinctrl core: initialized pinctrl subsystem
[ 0.018111] NET: Registered protocol family 16
[ 0.018452] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.041403] cpuidle: using governor ladder
[ 0.094445] msm_bus_fabric_init_driver
[ 0.095631] pps_core: LinuxPPS API ver. 1 registered
[ 0.095645] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.095687] PTP clock support registered
[ 0.097506] clocksource: Switched to clocksource dg_timer
[ 0.101402] NET: Registered protocol family 2
[ 0.101989] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.102029] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.102083] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.102134] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.102161] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.102330] NET: Registered protocol family 1
[ 0.102378] PCI: CLS 0 bytes, default 64
[ 0.106351] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.121743] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.127759] cryptodev: driver 1.9 loaded.
[ 0.127796] io scheduler noop registered
[ 0.127811] io scheduler deadline registered (default)
[ 0.129491] 1b500000.pci supply vdda not found, using dummy regulator
[ 0.129598] 1b500000.pci supply vdda_phy not found, using dummy regulator
[ 0.129679] 1b500000.pci supply vdda_refclk not found, using dummy regulator
[ 0.130411] OF: PCI: host bridge /soc/pci@1b500000 ranges:
[ 0.130452] OF: PCI: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[ 0.130477] OF: PCI: MEM 0x08000000..0x0fdfffff -> 0x08000000
[ 0.237890] qcom-pcie 1b500000.pci: link up
[ 0.238076] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[ 0.238100] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.238118] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
[ 0.238132] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[ 0.238183] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.238329] pci 0000:00:00.0: supports D1
[ 0.238340] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.238623] PCI: bus0: Fast back to back transfers disabled
[ 0.238943] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.239188] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.240345] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.240931] PCI: bus1: Fast back to back transfers disabled
[ 0.241212] pci 0000:00:00.0: BAR 14: assigned [mem 0x08000000-0x081fffff]
[ 0.241240] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[ 0.241375] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.241397] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
[ 0.241796] aer 0000:00:00.0:pcie002: service driver aer loaded
[ 0.242240] 1b700000.pci supply vdda not found, using dummy regulator
[ 0.242325] 1b700000.pci supply vdda_phy not found, using dummy regulator
[ 0.242409] 1b700000.pci supply vdda_refclk not found, using dummy regulator
[ 0.243133] OF: PCI: host bridge /soc/pci@1b700000 ranges:
[ 0.243172] OF: PCI: IO 0x31e00000..0x31efffff -> 0x31e00000
[ 0.243193] OF: PCI: MEM 0x2e000000..0x31dfffff -> 0x2e000000
[ 0.347884] qcom-pcie 1b700000.pci: link up
[ 0.348044] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[ 0.348062] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.348076] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[ 0.348122] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.348246] pci 0001:00:00.0: supports D1
[ 0.348255] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[ 0.348529] PCI: bus0: Fast back to back transfers disabled
[ 0.348829] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.349052] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.350118] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.350673] PCI: bus1: Fast back to back transfers disabled
[ 0.351045] pci 0001:00:00.0: BAR 14: assigned [mem 0x2e000000-0x2e1fffff]
[ 0.351068] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[ 0.351189] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 0.351207] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
[ 0.351571] aer 0001:00:00.0:pcie002: service driver aer loaded
[ 0.352017] 1b900000.pci supply vdda not found, using dummy regulator
[ 0.352107] 1b900000.pci supply vdda_phy not found, using dummy regulator
[ 0.352186] 1b900000.pci supply vdda_refclk not found, using dummy regulator
[ 0.352923] OF: PCI: host bridge /soc/pci@1b900000 ranges:
[ 0.352959] OF: PCI: IO 0x35e00000..0x35efffff -> 0x35e00000
[ 0.352981] OF: PCI: MEM 0x32000000..0x35dfffff -> 0x32000000
[ 1.357872] qcom-pcie 1b900000.pci: phy link never came up
[ 1.359720] qcom-pcie 1b900000.pci: hostinit failed
[ 1.360436] deviceless supply s1b not found, using dummy regulator
[ 1.362019] L2 @ QSB rate. Forcing new rate.
[ 1.362191] L2 @ 800000 KHz
[ 1.362300] CPU0 @ 800000 KHz
[ 1.362310] CPU1 @ QSB rate. Forcing new rate.
[ 1.362430] CPU1 @ 800000 KHz
[ 1.364470] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[ 1.366117] serial8250_init
[ 1.366129] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 1.367085] msm_serial 16340000.serial: msm_serial: detected port #0
[ 1.367157] msm_serial 16340000.serial: uartclk = 7372800
[ 1.367211] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 201, base_baud = 460800) is a MSM
[ 1.367242] msm_serial: console setup on port #0
[ 2.107457] console [ttyMSM0] enabled
[ 2.112289] msm_serial: driver initialized
[ 2.117416] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
[ 2.119669] nand: AMD/Spansion S34MS01G2
[ 2.126105] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 2.130497] 19 ofpart partitions found on MTD device qcom_nand.0
[ 2.137395] Creating 19 MTD partitions on "qcom_nand.0":
[ 2.143645] 0x000000000000-0x000000040000 : "SBL1"
[ 2.150247] 0x000000040000-0x000000180000 : "MIBIB"
[ 2.156041] 0x000000180000-0x0000002c0000 : "SBL2"
[ 2.160799] 0x0000002c0000-0x000000540000 : "SBL3"
[ 2.163698] random: fast init done
[ 2.171525] 0x000000540000-0x000000660000 : "DDRCONFIG"
[ 2.173919] 0x000000660000-0x000000780000 : "SSD"
[ 2.178836] 0x000000780000-0x000000a00000 : "TZ"
[ 2.185492] 0x000000a00000-0x000000c80000 : "RPM"
[ 2.190272] 0x000000c80000-0x000000dc0000 : "art"
[ 2.193008] 0x000000dc0000-0x000000ec0000 : "APPSBL"
[ 2.197364] 0x000000ec0000-0x000000f00000 : "u_env"
[ 2.201442] 0x000000f00000-0x000000f40000 : "s_env"
[ 2.205959] 0x000000f40000-0x000000f80000 : "devinfo"
[ 2.210889] 0x000000f80000-0x000003780000 : "linux"
[ 2.271307] 0x000001280000-0x000003780000 : "rootfs"
[ 2.323650] mtd: partition "rootfs" set to be root filesystem
[ 2.323681] 0x000003780000-0x000005f40000 : "linux2"
[ 2.383972] 0x000003a80000-0x000005f40000 : "rootfs2"
[ 2.436109] 0x000005f40000-0x000005f80000 : "nvram"
[ 2.437309] 0x000005f80000-0x000008000000 : "ddwrt"
[ 2.462125] random: crng init done
[ 2.486444] libphy: GPIO Bitbanged MDIO: probed
[ 2.489668] libphy: Fixed MDIO Bus: probed
[ 2.510289] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
[ 3.323805] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 3.323830] Ring mode enabled
[ 3.327912] DMA HW capability register supported
[ 3.330782] Enhanced/Alternate descriptors
[ 3.336422] Enabled extended descriptors
[ 3.339442] RX Checksum Offload Engine supported
[ 3.343547] COE Type 2
[ 3.348305] TX Checksum insertion supported
[ 3.350491] Wake-Up On Lan supported
[ 3.355010] eth%d: device MAC address 00:06:3b:01:41:00
[ 3.358647] Enable RX Mitigation via HW Watchdog Timer
[ 3.364800] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 3.368899] Ring mode enabled
[ 3.374013] DMA HW capability register supported
[ 3.376967] Enhanced/Alternate descriptors
[ 3.382609] Enabled extended descriptors
[ 3.385568] RX Checksum Offload Engine supported
[ 3.389793] COE Type 2
[ 3.394418] TX Checksum insertion supported
[ 3.396678] Wake-Up On Lan supported
[ 3.401262] eth%d: device MAC address 00:03:7f:ba:db:02
[ 3.404754] Enable RX Mitigation via HW Watchdog Timer
[ 3.410649] i2c /dev entries driver
[ 3.415580] Calibration not found.
[ 3.419600] CPUidle arm: CPU 0 failed to init idle CPU ops
[ 3.422403] GACT probability NOT on
[ 3.427418] Mirror/redirect action on
[ 3.430907] Simple TC action Loaded
[ 3.435167] netem: version 1.3
[ 3.438024] u32 classifier
[ 3.441034] Performance counters on
[ 3.443726] input device check on
[ 3.447459] Actions configured
[ 3.451343] Netfilter messages via NETLINK v0.30.
[ 3.454825] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 3.460014] nf_conntrack_rtsp v0.7 loading
[ 3.465615] xt_time: kernel timezone is -0000
[ 3.469451] ip_set: protocol 6
[ 3.473952] gre: GRE over IPv4 demultiplexor driver
[ 3.477165] nf_nat_rtsp v0.7 loading
[ 3.481621] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.485489] NET: Registered protocol family 17
[ 3.490740] Bridge firewalling registered
[ 3.494858] 8021q: 802.1Q VLAN Support v1.8
[ 3.499125] Registering SWP/SWPB emulation handler
[ 3.503247] registered taskstats version 1
[ 3.516724] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
[ 3.535327] s1a: Bringing 0uV into 1050000-1050000uV
[ 3.535592] s1b: Bringing 0uV into 1050000-1050000uV
[ 3.539662] s2a: Bringing 0uV into 800000-800000uV
[ 3.544524] s2b: Bringing 0uV into 800000-800000uV
[ 3.552695] trying to register driver cpufreq-dt
[ 3.555165] searching for nvram
[ 3.558569] nvram size = 262144
[ 3.606522] no valid UBI magic found inside mtd13
[ 3.606555] hctosys: unable to open rtc device (rtc0)
[ 3.615132] VFS: Mounted root (squashfs filesystem) readonly on device 31:16.
[ 3.616668] Freeing unused kernel memory: 1024K
[ 7.143941] Loading modules backported from Linux version v5.8-rc2-0-g48778464bb7d
[ 7.143971] Backport generated by backports.git v5.8-rc2-1-0-g7a69429b
[ 7.645627] ath9k: ath9k: Driver unloaded
[ 7.943510] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 7.944210] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 8.109265] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[ 8.427352] ath10k_pci 0000:01:00.0: found firmware features ie (4 B)
[ 8.427388] ath10k_pci 0000:01:00.0: Enabling feature bit: 3
[ 8.432842] ath10k_pci 0000:01:00.0: Enabling feature bit: 12
[ 8.438602] ath10k_pci 0000:01:00.0: Enabling feature bit: 13
[ 8.444144] ath10k_pci 0000:01:00.0: Enabling feature bit: 16
[ 8.449960] ath10k_pci 0000:01:00.0: Enabling feature bit: 17
[ 8.455615] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
[ 8.461401] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[ 8.473780] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.15-00015 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 e2c838df
[ 8.560184] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:2 crc32 792a3d38
[ 8.581445] ath10k_pci 0000:01:00.0: boot already acquired valid otp board id,skip download, board_id 2 chip_id 1
[ 9.822316] ath10k_pci 0000:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr c0:56:27:08:b2:92 status 0
[ 9.854204] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[ 9.953544] ath: EEPROM regdomain sanitized
[ 9.953550] ath: EEPROM regdomain: 0x64
[ 9.953555] ath: EEPROM indicates we should expect a direct regpair map
[ 9.953565] ath: Country alpha2 being used: 00
[ 9.953568] ath: Regpair used: 0x64
[ 9.959761] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[ 9.960464] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 10.173447] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[ 10.173512] ath10k_pci 0001:01:00.0: found firmware features ie (4 B)
[ 10.183152] ath10k_pci 0001:01:00.0: Enabling feature bit: 3
[ 10.189640] ath10k_pci 0001:01:00.0: Enabling feature bit: 12
[ 10.195280] ath10k_pci 0001:01:00.0: Enabling feature bit: 13
[ 10.200998] ath10k_pci 0001:01:00.0: Enabling feature bit: 16
[ 10.206652] ath10k_pci 0001:01:00.0: Enabling feature bit: 17
[ 10.212477] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
[ 10.218182] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[ 10.231874] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.15-00015 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 e2c838df
[ 10.294079] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:1 crc32 792a3d38
[ 10.315130] ath10k_pci 0001:01:00.0: boot already acquired valid otp board id,skip download, board_id 1 chip_id 1
[ 11.549663] ath10k_pci 0001:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr c0:56:27:08:b2:92 status 0
[ 11.579777] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[ 11.697945] ath: EEPROM regdomain sanitized
[ 11.697952] ath: EEPROM regdomain: 0x64
[ 11.697956] ath: EEPROM indicates we should expect a direct regpair map
[ 11.697969] ath: Country alpha2 being used: 00
[ 11.697973] ath: Regpair used: 0x64
[ 12.782104] dwmac1000: Master AXI performs any burst length
[ 12.782171] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 12.786737] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[ 12.890692] dwmac1000: Master AXI performs any burst length
[ 12.890730] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 12.895183] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 13.857927] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 14.864464] device br0 entered promiscuous mode
[ 14.922691] br0: port 1(vlan1) entered blocking state
[ 14.922712] br0: port 1(vlan1) entered disabled state
[ 14.926900] device vlan1 entered promiscuous mode
[ 14.931889] device eth0 entered promiscuous mode
[ 14.936485] br0: port 1(vlan1) entered blocking state
[ 14.941190] br0: port 1(vlan1) entered forwarding state
[ 14.977389] br0: port 2(vlan2) entered blocking state
[ 14.977411] br0: port 2(vlan2) entered disabled state
[ 14.981733] device vlan2 entered promiscuous mode
[ 14.986524] br0: port 2(vlan2) entered blocking state
[ 14.991237] br0: port 2(vlan2) entered forwarding state
[ 15.003339] device br0 left promiscuous mode
[ 15.005602] device br0 entered promiscuous mode
[ 15.016318] device br0 left promiscuous mode
[ 15.108342] ath: EEPROM regdomain: 0x8348
[ 15.108347] ath: EEPROM indicates we should expect a country code
[ 15.108351] ath: doing EEPROM country->regdmn map search
[ 15.108357] ath: country maps to regdmn code: 0x3a
[ 15.108360] ath: Country alpha2 being used: US
[ 15.108363] ath: Regpair used: 0x3a
[ 15.108370] ath: regdomain 0x8348 dynamically updated by user
[ 15.108384] ath: EEPROM regdomain: 0x8348
[ 15.108386] ath: EEPROM indicates we should expect a country code
[ 15.108390] ath: doing EEPROM country->regdmn map search
[ 15.108393] ath: country maps to regdmn code: 0x3a
[ 15.108396] ath: Country alpha2 being used: US
[ 15.108401] ath: Regpair used: 0x3a
[ 15.108404] ath: regdomain 0x8348 dynamically updated by user
[ 15.544888] tun: Universal TUN/TAP device driver, 1.6
[ 15.544910] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 16.829871] Linux kernel CIFS/SMB SERVER 3.2.3 by Namjae Jeon <linkinjeon@kernel.org>
[ 17.604636] usbcore: registered new interface driver usbfs
[ 17.604737] usbcore: registered new interface driver hub
[ 17.609157] usbcore: registered new device driver usb
[ 17.664710] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 17.672368] ehci-platform: EHCI generic platform driver
[ 17.692064] ehci-pci: EHCI PCI platform driver
[ 17.749172] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 18.100717] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 18.100798] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 18.105271] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 18.112780] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
[ 18.121960] hub 1-0:1.0: USB hub found
[ 18.127690] hub 1-0:1.0: 1 port detected
[ 18.131611] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 18.135229] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 18.140695] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 18.148660] hub 2-0:1.0: USB hub found
[ 18.156436] hub 2-0:1.0: 1 port detected
[ 18.240810] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 18.240857] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 18.245366] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 18.252865] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
[ 18.262040] hub 3-0:1.0: USB hub found
[ 18.268066] hub 3-0:1.0: 1 port detected
[ 18.271528] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 18.275331] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 18.280814] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 18.288712] hub 4-0:1.0: USB hub found
[ 18.296527] hub 4-0:1.0: 1 port detected
[ 18.647863] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 23.336379] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 23.336416] usb usb4: USB disconnect, device number 1
[ 23.340948] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered
[ 23.345471] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 23.351276] usb usb3: USB disconnect, device number 1
[ 23.356119] usb 3-1: USB disconnect, device number 2
[ 23.363504] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered
[ 23.366718] xhci-hcd xhci-hcd.0.auto: remove, state 1
[ 23.371925] usb usb2: USB disconnect, device number 1
[ 23.381523] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
[ 23.382244] xhci-hcd xhci-hcd.0.auto: remove, state 1
[ 23.387560] usb usb1: USB disconnect, device number 1
[ 23.394308] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
[ 23.445500] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 23.445583] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 23.450093] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 23.457445] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
[ 23.466741] hub 1-0:1.0: USB hub found
[ 23.472624] hub 1-0:1.0: 1 port detected
[ 23.476240] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 23.480124] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 23.485393] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 23.493427] hub 2-0:1.0: USB hub found
[ 23.501428] hub 2-0:1.0: 1 port detected
[ 23.505103] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 23.508939] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 23.514299] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 23.521740] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
[ 23.531039] hub 3-0:1.0: USB hub found
[ 23.536658] hub 3-0:1.0: 1 port detected
[ 23.540608] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 23.544253] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 23.549700] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 23.557591] hub 4-0:1.0: USB hub found
[ 23.565776] hub 4-0:1.0: 1 port detected
[ 23.617988] SCSI subsystem initialized
[ 23.717447] usbcore: registered new interface driver usb-storage
[ 23.793313] libata version 3.00 loaded.
[ 23.831597] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
[ 23.831646] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 23.835974] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
[ 23.845288] scsi host0: ahci
[ 23.853080] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 95
[ 23.907653] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 24.068703] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 24.072601] scsi host1: usb-storage 3-1:1.0
[ 24.179216] ata1: SATA link down (SStatus 0 SControl 300)
[ 24.332949] sdhci: Secure Digital Host Controller Interface driver
[ 24.332972] sdhci: Copyright(c) Pierre Ossman
[ 24.345575] sdhci-pltfm: SDHCI platform and OF driver helper
[ 25.128334] scsi 1:0:0:0: Direct-Access USB Flash Drive 1.00 PQ: 0 ANSI: 6
[ 25.129791] sd 1:0:0:0: [sda] 30629376 512-byte logical blocks: (15.7 GB/14.6 GiB)
[ 25.135811] sd 1:0:0:0: [sda] Write Protect is off
[ 25.142928] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 25.143443] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 25.150068] sda: sda1
[ 25.158825] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 25.225914] ksmbd: kill command received
[ 26.020910] EXT4-fs (sda1): Ignoring removed nobh option
[ 26.031019] EXT4-fs (sda1): barriers disabled
[ 26.049691] EXT4-fs (sda1): recovery complete
[ 26.049718] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: init_itable=0,nobarrier,nobh,barrier=0
[ 26.524154] Linux kernel CIFS/SMB SERVER 3.2.3 by Namjae Jeon <linkinjeon@kernel.org>
root@EA8500:~# cat /tmp/var/log/messages
Dec 31 18:00:14 EA8500 syslog.info syslogd started: BusyBox v1.32.0
Dec 31 18:00:14 EA8500 user.info : klogd : daemon successfully started
Dec 31 18:00:14 EA8500 kern.notice kernel: klogd started: BusyBox v1.32.0 (2020-10-05 01:05:26 +03)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Booting Linux on physical CPU 0x0
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] Linux version 4.9.237 (root@server2) (gcc version 10.0.1 (OpenWrt GCC 10.0.1 r12423-0493d57e04) ) #697 SMP Fri Oct 2 00:35:19 +03 2020
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] CPU: div instructions available: patching division code
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] OF: fdt:Machine model: Linksys EA8500 WiFi Router
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.000000] OF: fdt:Ignoring memory range 0x41500000 - 0x42000000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Memory policy: Data cache writealloc
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] On node 0 totalpages: 122880
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat c0b2dd80, node_mem_map ddc39000
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] Normal zone: 960 pages used for memmap
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] Normal zone: 122880 pages, LIFO batch:31
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] percpu: Embedded 12 pages/cpu s19084 r8192 d21876 u49152
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] pcpu-alloc: s19084 r8192 d21876 u49152 alloc=12*4096
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:16
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Memory: 478232K/491520K available (6144K kernel code, 186K rwdata, 1016K rodata, 1024K init, 407K bss, 13288K reserved, 0K cma-reserved, 0K highmem)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] Virtual kernel memory layout:
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] vmalloc : 0xde800000 - 0xff800000 ( 528 MB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] .text : 0xc0208000 - 0xc0900000 (7136 kB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] .data : 0xc0b00000 - 0xc0b2ebb8 ( 187 kB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] .bss : 0xc0b30000 - 0xc0b95ecc ( 408 kB)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Hierarchical RCU implementation.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] NR_IRQS:16 nr_irqs:16 16
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000009] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000023] Switching to timer-based delay loop, resolution 160ns
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000186] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000208] pid_max: default: 32768 minimum: 301
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000316] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000330] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000917] CPU: Testing write buffer coherency: ok
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.001208] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.001258] Setting up static identity map for 0x42300000 - 0x4230003c
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.004311] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.004484] Brought up 2 CPUs
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.004505] SMP: Total of 2 processors activated (25.00 BogoMIPS).
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.004514] CPU: All CPU(s) started in SVC mode.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.016733] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.016921] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.016950] futex hash table entries: 512 (order: 3, 32768 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.017022] pinctrl core: initialized pinctrl subsystem
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.018111] NET: Registered protocol family 16
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.018452] DMA: preallocated 256 KiB pool for atomic coherent allocations
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.041403] cpuidle: using governor ladder
Dec 31 18:00:14 EA8500 kern.err kernel: [ 0.094445] msm_bus_fabric_init_driver
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.095631] pps_core: LinuxPPS API ver. 1 registered
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.095645] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.095687] PTP clock support registered
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.097506] clocksource: Switched to clocksource dg_timer
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.101402] NET: Registered protocol family 2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.101989] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.102029] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.102083] TCP: Hash tables configured (established 4096 bind 4096)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.102134] UDP hash table entries: 256 (order: 1, 8192 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.102161] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.102330] NET: Registered protocol family 1
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.102378] PCI: CLS 0 bytes, default 64
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.106351] workingset: timestamp_bits=30 max_order=17 bucket_order=0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.121743] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.127759] cryptodev: driver 1.9 loaded.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.127796] io scheduler noop registered
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.127811] io scheduler deadline registered (default)
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.129491] 1b500000.pci supply vdda not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.129598] 1b500000.pci supply vdda_phy not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.129679] 1b500000.pci supply vdda_refclk not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.130411] OF: PCI: host bridge /soc/pci@1b500000 ranges:
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.130452] OF: PCI: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.130477] OF: PCI: MEM 0x08000000..0x0fdfffff -> 0x08000000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.237890] qcom-pcie 1b500000.pci: link up
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.238076] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.238100] pci_bus 0000:00: root bus resource [bus 00-ff]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.238118] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.238132] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.238183] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.238329] pci 0000:00:00.0: supports D1
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.238340] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.238623] PCI: bus0: Fast back to back transfers disabled
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.238943] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.239188] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.240345] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.240931] PCI: bus1: Fast back to back transfers disabled
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.241212] pci 0000:00:00.0: BAR 14: assigned [mem 0x08000000-0x081fffff]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.241240] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.241375] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.241397] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.241796] aer 0000:00:00.0:pcie002: service driver aer loaded
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.242240] 1b700000.pci supply vdda not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.242325] 1b700000.pci supply vdda_phy not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.242409] 1b700000.pci supply vdda_refclk not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.243133] OF: PCI: host bridge /soc/pci@1b700000 ranges:
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.243172] OF: PCI: IO 0x31e00000..0x31efffff -> 0x31e00000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.243193] OF: PCI: MEM 0x2e000000..0x31dfffff -> 0x2e000000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.347884] qcom-pcie 1b700000.pci: link up
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.348044] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.348062] pci_bus 0001:00: root bus resource [bus 00-ff]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.348076] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.348122] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.348246] pci 0001:00:00.0: supports D1
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.348255] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.348529] PCI: bus0: Fast back to back transfers disabled
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.348829] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.349052] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.350118] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.350673] PCI: bus1: Fast back to back transfers disabled
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.351045] pci 0001:00:00.0: BAR 14: assigned [mem 0x2e000000-0x2e1fffff]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.351068] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.351189] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.351207] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.351571] aer 0001:00:00.0:pcie002: service driver aer loaded
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.352017] 1b900000.pci supply vdda not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.352107] 1b900000.pci supply vdda_phy not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.352186] 1b900000.pci supply vdda_refclk not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.352923] OF: PCI: host bridge /soc/pci@1b900000 ranges:
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.352959] OF: PCI: IO 0x35e00000..0x35efffff -> 0x35e00000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.352981] OF: PCI: MEM 0x32000000..0x35dfffff -> 0x32000000
Dec 31 18:00:14 EA8500 kern.err kernel: [ 1.357872] qcom-pcie 1b900000.pci: phy link never came up
Dec 31 18:00:14 EA8500 kern.err kernel: [ 1.359720] qcom-pcie 1b900000.pci: hostinit failed
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 1.360436] deviceless supply s1b not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.362019] L2 @ QSB rate. Forcing new rate.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.362191] L2 @ 800000 KHz
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.362300] CPU0 @ 800000 KHz
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.362310] CPU1 @ QSB rate. Forcing new rate.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.362430] CPU1 @ 800000 KHz
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.364470] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.366117] serial8250_init
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.366129] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.367085] msm_serial 16340000.serial: msm_serial: detected port #0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.367157] msm_serial 16340000.serial: uartclk = 7372800
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.367211] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 201, base_baud = 460800) is a MSM
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.367242] msm_serial: console setup on port #0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.107457] console [ttyMSM0] enabled
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.112289] msm_serial: driver initialized
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.117416] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.119669] nand: AMD/Spansion S34MS01G2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.126105] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.130497] 19 ofpart partitions found on MTD device qcom_nand.0
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.137395] Creating 19 MTD partitions on "qcom_nand.0":
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.143645] 0x000000000000-0x000000040000 : "SBL1"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.150247] 0x000000040000-0x000000180000 : "MIBIB"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.156041] 0x000000180000-0x0000002c0000 : "SBL2"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.160799] 0x0000002c0000-0x000000540000 : "SBL3"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.163698] random: fast init done
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.171525] 0x000000540000-0x000000660000 : "DDRCONFIG"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.173919] 0x000000660000-0x000000780000 : "SSD"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.178836] 0x000000780000-0x000000a00000 : "TZ"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.185492] 0x000000a00000-0x000000c80000 : "RPM"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.190272] 0x000000c80000-0x000000dc0000 : "art"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.193008] 0x000000dc0000-0x000000ec0000 : "APPSBL"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.197364] 0x000000ec0000-0x000000f00000 : "u_env"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.201442] 0x000000f00000-0x000000f40000 : "s_env"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.205959] 0x000000f40000-0x000000f80000 : "devinfo"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.210889] 0x000000f80000-0x000003780000 : "linux"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.271307] 0x000001280000-0x000003780000 : "rootfs"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.323650] mtd: partition "rootfs" set to be root filesystem
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.323681] 0x000003780000-0x000005f40000 : "linux2"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.383972] 0x000003a80000-0x000005f40000 : "rootfs2"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.436109] 0x000005f40000-0x000005f80000 : "nvram"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.437309] 0x000005f80000-0x000008000000 : "ddwrt"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.462125] random: crng init done
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.486444] libphy: GPIO Bitbanged MDIO: probed
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.489668] libphy: Fixed MDIO Bus: probed
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.510289] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.323805] stmmac - user ID: 0x10, Synopsys ID: 0x37
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.323830] Ring mode enabled
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.327912] DMA HW capability register supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.330782] Enhanced/Alternate descriptors
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.336422] Enabled extended descriptors
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.339442] RX Checksum Offload Engine supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.343547] COE Type 2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.348305] TX Checksum insertion supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.350491] Wake-Up On Lan supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.355010] eth%d: device MAC address 00:06:3b:01:41:00
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.358647] Enable RX Mitigation via HW Watchdog Timer
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.364800] stmmac - user ID: 0x10, Synopsys ID: 0x37
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.368899] Ring mode enabled
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.374013] DMA HW capability register supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.376967] Enhanced/Alternate descriptors
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.382609] Enabled extended descriptors
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.385568] RX Checksum Offload Engine supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.389793] COE Type 2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.394418] TX Checksum insertion supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.396678] Wake-Up On Lan supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.401262] eth%d: device MAC address 00:03:7f:ba:db:02
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.404754] Enable RX Mitigation via HW Watchdog Timer
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.410649] i2c /dev entries driver
Dec 31 18:00:14 EA8500 kern.err kernel: [ 3.415580] Calibration not found.
Dec 31 18:00:14 EA8500 kern.err kernel: [ 3.419600] CPUidle arm: CPU 0 failed to init idle CPU ops
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.422403] GACT probability NOT on
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.427418] Mirror/redirect action on
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.430907] Simple TC action Loaded
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.435167] netem: version 1.3
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.438024] u32 classifier
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.441034] Performance counters on
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.443726] input device check on
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.447459] Actions configured
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.451343] Netfilter messages via NETLINK v0.30.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.454825] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 3.460014] nf_conntrack_rtsp v0.7 loading
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.465615] xt_time: kernel timezone is -0000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.469451] ip_set: protocol 6
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.473952] gre: GRE over IPv4 demultiplexor driver
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 3.477165] nf_nat_rtsp v0.7 loading
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.481621] ip_tables: (C) 2000-2006 Netfilter Core Team
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.485489] NET: Registered protocol family 17
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 3.490740] Bridge firewalling registered
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.494858] 8021q: 802.1Q VLAN Support v1.8
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 3.499125] Registering SWP/SWPB emulation handler
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.503247] registered taskstats version 1
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.516724] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.535327] s1a: Bringing 0uV into 1050000-1050000uV
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.535592] s1b: Bringing 0uV into 1050000-1050000uV
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.539662] s2a: Bringing 0uV into 800000-800000uV
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.544524] s2b: Bringing 0uV into 800000-800000uV
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.552695] trying to register driver cpufreq-dt
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.555165] searching for nvram
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.558569] nvram size = 262144
Dec 31 18:00:14 EA8500 kern.err kernel: [ 3.606522] no valid UBI magic found inside mtd13
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.606555] hctosys: unable to open rtc device (rtc0)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.615132] VFS: Mounted root (squashfs filesystem) readonly on device 31:16.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.616668] Freeing unused kernel memory: 1024K
Dec 31 18:00:14 EA8500 kern.info kernel: [ 7.143941] Loading modules backported from Linux version v5.8-rc2-0-g48778464bb7d
Dec 31 18:00:14 EA8500 kern.info kernel: [ 7.143971] Backport generated by backports.git v5.8-rc2-1-0-g7a69429b
Dec 31 18:00:14 EA8500 kern.info kernel: [ 7.645627] ath9k: ath9k: Driver unloaded
Dec 31 18:00:14 EA8500 kern.info kernel: [ 7.943510] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 7.944210] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 8.109265] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.427352] ath10k_pci 0000:01:00.0: found firmware features ie (4 B)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.427388] ath10k_pci 0000:01:00.0: Enabling feature bit: 3
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.432842] ath10k_pci 0000:01:00.0: Enabling feature bit: 12
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.438602] ath10k_pci 0000:01:00.0: Enabling feature bit: 13
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.444144] ath10k_pci 0000:01:00.0: Enabling feature bit: 16
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.449960] ath10k_pci 0000:01:00.0: Enabling feature bit: 17
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.455615] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.461401] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.473780] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.15-00015 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 e2c838df
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.560184] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:2 crc32 792a3d38
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.581445] ath10k_pci 0000:01:00.0: boot already acquired valid otp board id,skip download, board_id 2 chip_id 1
Dec 31 18:00:14 EA8500 kern.info kernel: [ 9.822316] ath10k_pci 0000:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr c0:56:27:08:b2:92 status 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 9.854204] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 9.953544] ath: EEPROM regdomain sanitized
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 9.953550] ath: EEPROM regdomain: 0x64
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 9.953555] ath: EEPROM indicates we should expect a direct regpair map
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 9.953565] ath: Country alpha2 being used: 00
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 9.953568] ath: Regpair used: 0x64
Dec 31 18:00:14 EA8500 kern.info kernel: [ 9.959761] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 9.960464] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 10.173447] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.173512] ath10k_pci 0001:01:00.0: found firmware features ie (4 B)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.183152] ath10k_pci 0001:01:00.0: Enabling feature bit: 3
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.189640] ath10k_pci 0001:01:00.0: Enabling feature bit: 12
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.195280] ath10k_pci 0001:01:00.0: Enabling feature bit: 13
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.200998] ath10k_pci 0001:01:00.0: Enabling feature bit: 16
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.206652] ath10k_pci 0001:01:00.0: Enabling feature bit: 17
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.212477] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.218182] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.231874] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.15-00015 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 e2c838df
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.294079] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:1 crc32 792a3d38
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.315130] ath10k_pci 0001:01:00.0: boot already acquired valid otp board id,skip download, board_id 1 chip_id 1
Dec 31 18:00:14 EA8500 kern.info kernel: [ 11.549663] ath10k_pci 0001:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr c0:56:27:08:b2:92 status 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 11.579777] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 11.697945] ath: EEPROM regdomain sanitized
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 11.697952] ath: EEPROM regdomain: 0x64
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 11.697956] ath: EEPROM indicates we should expect a direct regpair map
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 11.697969] ath: Country alpha2 being used: 00
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 11.697973] ath: Regpair used: 0x64
Dec 31 18:00:14 EA8500 kern.info kernel: [ 12.782104] dwmac1000: Master AXI performs any burst length
Dec 31 18:00:14 EA8500 kern.info kernel: [ 12.782171] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 12.786737] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
Dec 31 18:00:14 EA8500 kern.info kernel: [ 12.890692] dwmac1000: Master AXI performs any burst length
Dec 31 18:00:14 EA8500 kern.info kernel: [ 12.890730] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 12.895183] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
Dec 31 18:00:14 EA8500 kern.info kernel: [ 13.857927] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
Dec 31 18:00:14 EA8500 daemon.info smartd[880]: smartd 7.1 2019-12-30 r5022 [armv7l-linux-4.9.237] (local build)
Dec 31 18:00:14 EA8500 daemon.info smartd[880]: Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
Dec 31 18:00:14 EA8500 daemon.info smartd[880]: Opened configuration file /usr/etc/smartd.conf
Dec 31 18:00:14 EA8500 daemon.info smartd[880]: Drive: DEVICESCAN, implied '-a' Directive on line 32 of file /usr/etc/smartd.conf
Dec 31 18:00:14 EA8500 daemon.info smartd[880]: Configuration file /usr/etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Dec 31 18:00:14 EA8500 daemon.crit smartd[880]: In the system's table of devices NO devices found to scan
Dec 31 18:00:14 EA8500 daemon.info smartd[880]: Unable to monitor any SMART enabled devices. Try debug (-d) option. Exiting...
Dec 31 18:00:14 EA8500 user.info : resetbutton : resetbutton daemon successfully started
Dec 31 18:00:14 EA8500 user.info : bridge : bridge br0 successfully added
Dec 31 18:00:14 EA8500 daemon.info mstpd[764]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
Dec 31 18:00:14 EA8500 daemon.info mstpd[764]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
Dec 31 18:00:14 EA8500 daemon.info mstpd[764]: error, CTL_set_msti_bridge_config: Couldn't find bridge with index 9
Dec 31 18:00:14 EA8500 user.info : bridge : interface wlan0 successfully deleted from bridge br0
Dec 31 18:00:14 EA8500 user.info : bridge : interface wlan1 successfully deleted from bridge br0
Dec 31 18:00:14 EA8500 user.info : bridge : bridge br0 successfully added
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.864464] device br0 entered promiscuous mode
Dec 31 18:00:14 EA8500 daemon.info mstpd[764]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
Dec 31 18:00:14 EA8500 daemon.info mstpd[764]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
Dec 31 18:00:14 EA8500 user.info : bridge : interface vlan1 successfully added to bridge br0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.922691] br0: port 1(vlan1) entered blocking state
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.922712] br0: port 1(vlan1) entered disabled state
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.926900] device vlan1 entered promiscuous mode
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.931889] device eth0 entered promiscuous mode
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.936485] br0: port 1(vlan1) entered blocking state
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.941190] br0: port 1(vlan1) entered forwarding state
Dec 31 18:00:14 EA8500 user.info : bridge : interface vlan2 successfully added to bridge br0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.977389] br0: port 2(vlan2) entered blocking state
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.977411] br0: port 2(vlan2) entered disabled state
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.981733] device vlan2 entered promiscuous mode
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.986524] br0: port 2(vlan2) entered blocking state
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.991237] br0: port 2(vlan2) entered forwarding state
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.003339] device br0 left promiscuous mode
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.005602] device br0 entered promiscuous mode
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.016318] device br0 left promiscuous mode
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.108342] ath: EEPROM regdomain: 0x8348
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.108347] ath: EEPROM indicates we should expect a country code
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.108351] ath: doing EEPROM country->regdmn map search
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.108357] ath: country maps to regdmn code: 0x3a
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.108360] ath: Country alpha2 being used: US
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.108363] ath: Regpair used: 0x3a
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.108370] ath: regdomain 0x8348 dynamically updated by user
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.108384] ath: EEPROM regdomain: 0x8348
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.108386] ath: EEPROM indicates we should expect a country code
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.108390] ath: doing EEPROM country->regdmn map search
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.108393] ath: country maps to regdmn code: 0x3a
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.108396] ath: Country alpha2 being used: US
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.108401] ath: Regpair used: 0x3a
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.108404] ath: regdomain 0x8348 dynamically updated by user
Dec 31 18:00:15 EA8500 user.info : klogd : kernel log daemon successfully stopped
Dec 31 18:00:15 EA8500 user.info : hwmon : successfully started
Dec 31 18:00:15 EA8500 kern.notice kernel: klogd: exiting
Dec 31 18:00:15 EA8500 user.info : sfe : shortcut forwarding engine successfully stopped
Dec 31 18:00:15 EA8500 daemon.info smartd[1062]: smartd 7.1 2019-12-30 r5022 [armv7l-linux-4.9.237] (local build)
Dec 31 18:00:15 EA8500 daemon.info smartd[1062]: Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
Dec 31 18:00:15 EA8500 daemon.info smartd[1062]: Opened configuration file /usr/etc/smartd.conf
Dec 31 18:00:15 EA8500 daemon.info smartd[1062]: Drive: DEVICESCAN, implied '-a' Directive on line 32 of file /usr/etc/smartd.conf
Dec 31 18:00:15 EA8500 daemon.info smartd[1062]: Configuration file /usr/etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Dec 31 18:00:15 EA8500 daemon.crit smartd[1062]: In the system's table of devices NO devices found to scan
Dec 31 18:00:15 EA8500 daemon.info smartd[1062]: Unable to monitor any SMART enabled devices. Try debug (-d) option. Exiting...
Dec 31 18:00:15 EA8500 user.info : syslogd : syslog daemon successfully stopped
Dec 31 18:00:15 EA8500 syslog.info syslogd exiting
Dec 31 18:00:15 EA8500 syslog.info syslogd started: BusyBox v1.32.0
Dec 31 18:00:15 EA8500 cron.info cron[1100]: (CRON) STARTUP (fork ok)
Dec 31 18:00:15 EA8500 user.info : dropbear : ssh daemon successfully started
Dec 31 18:00:15 EA8500 authpriv.info dropbear[1105]: Running in background
Dec 31 18:00:15 EA8500 daemon.info dnsmasq[1131]: started, version 2.82 cachesize 1500
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1131]: compile time options: IPv6 GNU-getopt no-DBus no-UBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP no-conntrack ipset no-auth DNSSEC loop-detect no-inotify no-dumpfile
Dec 31 18:00:16 EA8500 daemon.warn dnsmasq[1131]: warning: interface vlan15 does not currently exist
Dec 31 18:00:16 EA8500 daemon.info dnsmasq-dhcp[1131]: DHCP, IP range 192.168.1.6 -- 192.168.1.10, lease time 12h
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1131]: using only locally-known addresses for domain test
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1131]: using only locally-known addresses for domain onion
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1131]: using only locally-known addresses for domain localhost
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1131]: using only locally-known addresses for domain local
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1131]: using only locally-known addresses for domain invalid
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1131]: using only locally-known addresses for domain bind
Dec 31 18:00:16 EA8500 daemon.warn dnsmasq[1131]: failed to access /tmp/resolv.dnsmasq: No such file or directory
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1131]: read /etc/hosts - 3 addresses
Dec 31 18:00:16 EA8500 user.info : dnsmasq : daemon successfully started
Dec 31 18:00:16 EA8500 daemon.warn openvpn[1090]: WARNING: Using --management on a TCP port WITHOUT passwords is STRONGLY discouraged and considered insecure
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1090]: OpenVPN 2.4.9 arm-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD] built on Oct 5 2020
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1090]: library versions: OpenSSL 1.1.1h 22 Sep 2020, LZO 2.09
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1153]: MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:14
Dec 31 18:00:16 EA8500 daemon.warn openvpn[1153]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1153]: Diffie-Hellman initialized with 2048 bit key
Dec 31 18:00:16 EA8500 daemon.warn openvpn[1153]: WARNING: Your certificate is not yet valid!
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1153]: TUN/TAP device tun2 opened
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1153]: TUN/TAP TX queue length set to 100
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1153]: /sbin/ifconfig tun2 10.19.92.225 netmask 255.255.255.224 mtu 1500 broadcast 10.19.92.255
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1153]: Socket Buffers: R=[180224->180224] S=[180224->180224]
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1153]: UDPv4 link local (bound): [AF_INET][undef]:43210
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1153]: UDPv4 link remote: [AF_UNSPEC]
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1153]: MULTI: multi_init called, r=256 v=256
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1153]: IFCONFIG POOL: base=10.19.92.226 size=28, ipv6=0
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1153]: IFCONFIG POOL LIST
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1153]: Initialization Sequence Completed
Dec 31 18:00:16 EA8500 user.info : dnsmasq : daemon successfully stopped
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1131]: exiting on receipt of SIGTERM
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1229]: started, version 2.82 cachesize 1500
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1229]: compile time options: IPv6 GNU-getopt no-DBus no-UBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP no-conntrack ipset no-auth DNSSEC loop-detect no-inotify no-dumpfile
Dec 31 18:00:16 EA8500 daemon.warn dnsmasq[1229]: warning: interface vlan15 does not currently exist
Dec 31 18:00:16 EA8500 daemon.info dnsmasq-dhcp[1229]: DHCP, IP range 192.168.1.6 -- 192.168.1.10, lease time 12h
Dec 31 18:00:16 EA8500 user.info : dnsmasq : daemon successfully started
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1229]: using only locally-known addresses for domain test
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1229]: using only locally-known addresses for domain onion
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1229]: using only locally-known addresses for domain localhost
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1229]: using only locally-known addresses for domain local
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1229]: using only locally-known addresses for domain invalid
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1229]: using only locally-known addresses for domain bind
Dec 31 18:00:16 EA8500 daemon.warn dnsmasq[1229]: failed to access /tmp/resolv.dnsmasq: No such file or directory
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1229]: read /etc/hosts - 3 addresses
Dec 31 18:00:16 EA8500 user.info : wland : daemon successfully stopped
Dec 31 18:00:16 EA8500 user.info : wland : daemon successfully started
Dec 31 18:00:16 EA8500 kern.info kernel: [ 16.829871] Linux kernel CIFS/SMB SERVER 3.2.3 by Namjae Jeon <linkinjeon@kernel.org>
Dec 31 18:00:16 EA8500 user.info wsdd2[1259]: starting.
Dec 31 18:00:16 EA8500 user.info : smbd : samba started
Dec 31 18:00:17 EA8500 user.info : sfe : shortcut forwarding engine successfully stopped
Dec 31 18:00:17 EA8500 user.info : process_monitor : successfully started
Dec 31 18:00:17 EA8500 daemon.info httpd[1314]: httpd : httpd server started at port 80
Dec 31 18:00:17 EA8500 user.info : httpd : http daemon successfully started
Dec 31 18:00:17 EA8500 user.info : httpd : daemon successfully stopped
Dec 31 18:00:17 EA8500 daemon.info httpd[1337]: httpd : httpd server shutdown
Dec 31 18:00:17 EA8500 daemon.debug ntpclient[1333]: Connecting to 2.pool.ntp.org [69.164.213.136] ...
Oct 8 20:43:15 EA8500 daemon.info ntpclient[1333]: Time set from 2.pool.ntp.org [69.164.213.136].
Oct 8 20:43:15 EA8500 daemon.info process_monitor[1332]: cyclic NTP Update success (servers 2.pool.ntp.org 212.18.3.19 88.99.174.22)
Oct 8 20:43:15 EA8500 daemon.info httpd[1350]: httpd : httpd server started at port 80
Oct 8 20:43:15 EA8500 user.info : httpd : http daemon successfully started
Oct 8 20:43:15 EA8500 user.info : resetbutton : daemon successfully stopped
Oct 8 20:43:15 EA8500 user.info : resetbutton : resetbutton daemon successfully started
Oct 8 20:43:15 EA8500 kern.info kernel: [ 17.604636] usbcore: registered new interface driver usbfs
Oct 8 20:43:15 EA8500 kern.info kernel: [ 17.604737] usbcore: registered new interface driver hub
Oct 8 20:43:15 EA8500 kern.info kernel: [ 17.609157] usbcore: registered new device driver usb
Oct 8 20:43:15 EA8500 daemon.debug process_monitor[1332]: Restarting cron (time sync change)
Oct 8 20:43:15 EA8500 user.info : cron : daemon successfully stopped
Oct 8 20:43:15 EA8500 kern.info kernel: [ 17.664710] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 8 20:43:15 EA8500 kern.info kernel: [ 17.672368] ehci-platform: EHCI generic platform driver
Oct 8 20:43:15 EA8500 kern.info kernel: [ 17.692064] ehci-pci: EHCI PCI platform driver
Oct 8 20:43:15 EA8500 user.info : cron : daemon successfully started
Oct 8 20:43:15 EA8500 cron.info cron[1417]: (CRON) STARTUP (fork ok)
Oct 8 20:43:15 EA8500 user.info : process_monitor : daemon successfully stopped
Oct 8 20:43:16 EA8500 daemon.info process_monitor[1332]: process_monitor : cleanup timers
Oct 8 20:43:16 EA8500 kern.info kernel: [ 17.749172] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 8 20:43:16 EA8500 user.info : process_monitor : successfully started
Oct 8 20:43:16 EA8500 daemon.debug process_monitor[1424]: We need to re-update after 3600 seconds
Oct 8 20:43:16 EA8500 daemon.info process_monitor[1424]: process_monitor : set timer: 3600 seconds, callback: ntp_main()
Oct 8 20:43:16 EA8500 kern.info kernel: [ 18.100717] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Oct 8 20:43:16 EA8500 kern.info kernel: [ 18.100798] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
Oct 8 20:43:16 EA8500 kern.info kernel: [ 18.105271] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Oct 8 20:43:16 EA8500 kern.info kernel: [ 18.112780] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
Oct 8 20:43:16 EA8500 kern.info kernel: [ 18.121960] hub 1-0:1.0: USB hub found
Oct 8 20:43:16 EA8500 kern.info kernel: [ 18.127690] hub 1-0:1.0: 1 port detected
Oct 8 20:43:16 EA8500 kern.info kernel: [ 18.131611] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Oct 8 20:43:16 EA8500 kern.info kernel: [ 18.135229] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
Oct 8 20:43:16 EA8500 kern.info kernel: [ 18.140695] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Oct 8 20:43:16 EA8500 kern.info kernel: [ 18.148660] hub 2-0:1.0: USB hub found
Oct 8 20:43:16 EA8500 kern.info kernel: [ 18.156436] hub 2-0:1.0: 1 port detected
Oct 8 20:43:16 EA8500 kern.info kernel: [ 18.240810] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Oct 8 20:43:16 EA8500 kern.info kernel: [ 18.240857] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
Oct 8 20:43:16 EA8500 kern.info kernel: [ 18.245366] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Oct 8 20:43:16 EA8500 kern.info kernel: [ 18.252865] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
Oct 8 20:43:16 EA8500 kern.info kernel: [ 18.262040] hub 3-0:1.0: USB hub found
Oct 8 20:43:16 EA8500 kern.info kernel: [ 18.268066] hub 3-0:1.0: 1 port detected
Oct 8 20:43:16 EA8500 kern.info kernel: [ 18.271528] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Oct 8 20:43:16 EA8500 kern.info kernel: [ 18.275331] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
Oct 8 20:43:16 EA8500 kern.info kernel: [ 18.280814] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
Oct 8 20:43:16 EA8500 kern.info kernel: [ 18.288712] hub 4-0:1.0: USB hub found
Oct 8 20:43:16 EA8500 kern.info kernel: [ 18.296527] hub 4-0:1.0: 1 port detected
Oct 8 20:43:16 EA8500 kern.info kernel: [ 18.647863] usb 3-1: new high-speed USB device number 2 using xhci-hcd
Oct 8 20:43:19 EA8500 daemon.warn dnsmasq-dhcp[1229]: no address range available for DHCP request via br0
Oct 8 20:43:19 EA8500 daemon.warn dnsmasq-dhcp[1229]: no address range available for DHCP request via br0
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.336379] xhci-hcd xhci-hcd.1.auto: remove, state 1
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.336416] usb usb4: USB disconnect, device number 1
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.340948] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.345471] xhci-hcd xhci-hcd.1.auto: remove, state 1
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.351276] usb usb3: USB disconnect, device number 1
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.356119] usb 3-1: USB disconnect, device number 2
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.363504] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.366718] xhci-hcd xhci-hcd.0.auto: remove, state 1
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.371925] usb usb2: USB disconnect, device number 1
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.381523] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.382244] xhci-hcd xhci-hcd.0.auto: remove, state 1
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.387560] usb usb1: USB disconnect, device number 1
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.394308] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.445500] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.445583] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.450093] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.457445] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.466741] hub 1-0:1.0: USB hub found
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.472624] hub 1-0:1.0: 1 port detected
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.476240] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.480124] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.485393] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.493427] hub 2-0:1.0: USB hub found
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.501428] hub 2-0:1.0: 1 port detected
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.505103] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.508939] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.514299] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.521740] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.531039] hub 3-0:1.0: USB hub found
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.536658] hub 3-0:1.0: 1 port detected
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.540608] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.544253] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.549700] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.557591] hub 4-0:1.0: USB hub found
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.565776] hub 4-0:1.0: 1 port detected
Oct 8 20:43:21 EA8500 kern.notice kernel: [ 23.617988] SCSI subsystem initialized
Oct 8 20:43:21 EA8500 kern.info kernel: [ 23.717447] usbcore: registered new interface driver usb-storage
Oct 8 20:43:22 EA8500 kern.debug kernel: [ 23.793313] libata version 3.00 loaded.
Oct 8 20:43:22 EA8500 kern.info kernel: [ 23.831597] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
Oct 8 20:43:22 EA8500 kern.info kernel: [ 23.831646] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
Oct 8 20:43:22 EA8500 kern.info kernel: [ 23.835974] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
Oct 8 20:43:22 EA8500 kern.info kernel: [ 23.845288] scsi host0: ahci
Oct 8 20:43:22 EA8500 kern.info kernel: [ 23.853080] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 95
Oct 8 20:43:22 EA8500 kern.info kernel: [ 23.907653] usb 3-1: new high-speed USB device number 2 using xhci-hcd
Oct 8 20:43:22 EA8500 kern.info kernel: [ 24.068703] usb-storage 3-1:1.0: USB Mass Storage device detected
Oct 8 20:43:22 EA8500 kern.info kernel: [ 24.072601] scsi host1: usb-storage 3-1:1.0
Oct 8 20:43:22 EA8500 kern.info kernel: [ 24.179216] ata1: SATA link down (SStatus 0 SControl 300)
Oct 8 20:43:22 EA8500 kern.info kernel: [ 24.332949] sdhci: Secure Digital Host Controller Interface driver
Oct 8 20:43:22 EA8500 kern.info kernel: [ 24.332972] sdhci: Copyright(c) Pierre Ossman
Oct 8 20:43:22 EA8500 kern.info kernel: [ 24.345575] sdhci-pltfm: SDHCI platform and OF driver helper
Oct 8 20:43:23 EA8500 kern.notice kernel: [ 25.128334] scsi 1:0:0:0: Direct-Access USB Flash Drive 1.00 PQ: 0 ANSI: 6
Oct 8 20:43:23 EA8500 kern.notice kernel: [ 25.129791] sd 1:0:0:0: [sda] 30629376 512-byte logical blocks: (15.7 GB/14.6 GiB)
Oct 8 20:43:23 EA8500 kern.notice kernel: [ 25.135811] sd 1:0:0:0: [sda] Write Protect is off
Oct 8 20:43:23 EA8500 kern.debug kernel: [ 25.142928] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
Oct 8 20:43:23 EA8500 kern.notice kernel: [ 25.143443] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Oct 8 20:43:23 EA8500 kern.info kernel: [ 25.150068] sda: sda1
Oct 8 20:43:23 EA8500 kern.notice kernel: [ 25.158825] sd 1:0:0:0: [sda] Attached SCSI removable disk
Oct 8 20:43:23 EA8500 user.info : cron : daemon successfully stopped
Oct 8 20:43:23 EA8500 user.info : wsdd2 : windows service discovery daemon successfully stopped
Oct 8 20:43:23 EA8500 user.err wsdd2[1259]: Terminated received.
Oct 8 20:43:23 EA8500 user.info wsdd2[1259]: terminating.
Oct 8 20:43:23 EA8500 user.info : ksmbd.mountd : samba daemon successfully stopped
Oct 8 20:43:23 EA8500 local5.err ksmbd: [ksmbd-manager/1265]: ERROR: WARNING: child process exited abnormally: 1266
Oct 8 20:43:23 EA8500 kern.info kernel: [ 25.225914] ksmbd: kill command received
Oct 8 20:43:24 EA8500 kern.warn kernel: [ 26.020910] EXT4-fs (sda1): Ignoring removed nobh option
Oct 8 20:43:24 EA8500 kern.info kernel: [ 26.031019] EXT4-fs (sda1): barriers disabled
Oct 8 20:43:24 EA8500 cron.info cron[1674]: (CRON) STARTUP (fork ok)
Oct 8 20:43:24 EA8500 user.info : cron : daemon successfully started
Oct 8 20:43:24 EA8500 kern.info kernel: [ 26.049691] EXT4-fs (sda1): recovery complete
Oct 8 20:43:24 EA8500 kern.info kernel: [ 26.049718] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: init_itable=0,nobarrier,nobh,barrier=0
Oct 8 20:43:24 EA8500 user.info : cron : daemon successfully stopped
Oct 8 20:43:24 EA8500 user.info : cron : daemon successfully started
Oct 8 20:43:24 EA8500 cron.info cron[1698]: (CRON) STARTUP (fork ok)
Oct 8 20:43:24 EA8500 kern.info kernel: [ 26.524154] Linux kernel CIFS/SMB SERVER 3.2.3 by Namjae Jeon <linkinjeon@kernel.org>
Oct 8 20:43:24 EA8500 user.info wsdd2[1783]: starting.
Oct 8 20:43:24 EA8500 user.info : smbd : samba started
Oct 8 20:43:24 EA8500 local5.info ksmbd: [ksmbd-manager/1787]: INFO: Unlink orphaned '/tmp/ksmbd.lock'
Oct 8 20:43:24 EA8500 user.info wsdd2[1813]: starting.
Oct 8 20:43:24 EA8500 local5.info ksmbd: [ksmbd-manager/1817]: INFO: File '/tmp/ksmbd.lock' belongs to pid 1787
Oct 8 20:43:24 EA8500 local5.err ksmbd: [ksmbd-manager/1817]: ERROR: Failed to create lock file: File exists
Oct 8 20:43:24 EA8500 user.info : smbd : samba started
Oct 8 20:44:21 EA8500 authpriv.info dropbear[1838]: Child connection from 10.72.28.16:55252
Oct 8 20:44:22 EA8500 authpriv.notice dropbear[1838]: Pubkey auth succeeded for 'root' with key md5 02:dd:6e:8e:c8:bb:bc:e9:23:24:92:0d:ea:2c:7b:17 from 10.72.28.16:55252
root@EA8500:~# uptime
20:45:19 up 2 min, load average: 0.03, 0.03, 0.00
root@EA8500:~# date
Thu Oct 8 20:45:21 CDT 2020
root@EA8500:~# for CPUFREQ in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor; do [ -f $CPUFREQ ] || continue; echo -n ondemand > $CPUFR
EQ; done
root@EA8500:~# echo 35 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold
root@EA8500:~# exit
Connection to ea8500.mrjcd.com closed.
mrjcd@Fat-Deb:~$