BS posted build in forum:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1210871#1210871
#
sha256
66ad542d52905c7d00d97bd2da5dcc285baef4634a4466aec82636b259d84c41 *dd-wrt-webupgrade_ea8500.bin
#
Linksys EA8500
DD-WRT v3.0-r43761 std (07/11/20)
Linux 4.9.230 #601 SMP Thu Jul 9 19:40:35 +03 2020 armv7l
GUI install over r43736
working like previous build for me
mrjcd@Will-Be-Was:~$ ssh root@ea8500.mrjcd.com
DD-WRT v3.0-r43761 std (c) 2020 NewMedia-NET GmbH
Release: 07/11/20
Board: Linksys EA8500
==========================================================
___ ___ _ _____ ______ ____ ___
/ _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \
/ // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // /
/____/____/ |__/|__/_/|_| /_/ |___/____(_)___/
DD-WRT v3.0
http://www.dd-wrt.com
==========================================================
BusyBox v1.32.0 (2020-07-11 13:52:57 +03) built-in shell (ash)
root@EA8500:~# ps
PID USER VSZ STAT COMMAND
1 root 1036 S /sbin/init
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
4 root 0 SW [kworker/0:0]
5 root 0 SW< [kworker/0:0H]
6 root 0 SW [kworker/u4:0]
7 root 0 SW [rcu_sched]
8 root 0 SW [rcu_bh]
9 root 0 SW [migration/0]
10 root 0 SW< [lru-add-drain]
11 root 0 SW [cpuhp/0]
12 root 0 SW [cpuhp/1]
13 root 0 SW [migration/1]
14 root 0 SW [ksoftirqd/1]
16 root 0 SW< [kworker/1:0H]
17 root 0 SW [oom_reaper]
18 root 0 SW< [writeback]
19 root 0 SW [kcompactd0]
20 root 0 SW< [crypto]
21 root 0 SW< [bioset]
22 root 0 SW< [kblockd]
23 root 0 SW< [watchdogd]
25 root 0 SW [kworker/0:1]
42 root 0 SW [kswapd0]
43 root 0 SW< [vmstat]
69 root 0 SW< [cryptodev_queue]
70 root 0 SW [kworker/1:1]
71 root 0 SW [kworker/u4:1]
73 root 0 SW< [bioset]
74 root 0 SW< [bioset]
75 root 0 SW< [bioset]
76 root 0 SW< [bioset]
77 root 0 SW< [bioset]
78 root 0 SW< [bioset]
79 root 0 SW< [bioset]
80 root 0 SW< [bioset]
81 root 0 SW< [bioset]
82 root 0 SW< [bioset]
83 root 0 SW< [bioset]
84 root 0 SW< [bioset]
85 root 0 SW< [bioset]
86 root 0 SW< [bioset]
87 root 0 SW< [bioset]
88 root 0 SW< [bioset]
89 root 0 SW< [bioset]
90 root 0 SW< [bioset]
91 root 0 SW< [bioset]
96 root 0 SW< [kworker/0:1H]
97 root 0 SW< [kworker/1:1H]
735 root 732 S /sbin/hotplug2 --set-rules-file /etc/hotplug2.rules --persistent
739 root 780 S /sbin/mstpd
747 root 960 S irqbalance -t 10
751 root 1768 S watchdog
777 root 0 SW< [cfg80211]
779 root 0 SW [kworker/1:2]
788 root 0 SW< [ath10k_wq]
789 root 0 SW< [ath10k_aux_wq]
790 root 0 SW< [ath10k_tx_compl]
792 root 0 SW< [ath10k_wq]
794 root 0 SW< [ath10k_aux_wq]
795 root 0 SW< [ath10k_tx_compl]
1013 root 1368 S syslogd -Z -L
1024 root 1368 S klogd
1027 root 1044 S dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_rsa_key -p 22 -s
1068 root 3312 S /tmp/openvpnserver --config /tmp/openvpn/openvpn.conf --daemon
1185 root 1728 S dnsmasq -u root -g root --conf-file=/tmp/dnsmasq.conf
1191 root 1728 S wland
1295 root 1432 S resetbutton
1305 root 5012 S httpd -n -p 80
1388 root 1768 S process_monitor
1431 root 0 SW< [ata_sff]
1436 root 0 SW [scsi_eh_0]
1437 root 0 SW< [scsi_tmf_0]
1438 root 0 SW [scsi_eh_1]
1440 root 0 SW< [scsi_tmf_1]
1441 root 0 SW [usb-storage]
1531 root 0 SW< [bioset]
1563 root 0 SW [jbd2/sda-8]
1564 root 0 SW< [ext4-rsv-conver]
1574 root 708 S cron
1818 root 724 S wsdd2 -d -N EA8500 -G WORKGROUP -b vendor:dd-wrt,model:Linksys EA8500,sku:43761
1821 root 1196 S ksmbd.mountd -c /tmp/smb.conf -u /tmp/smb.db
1822 root 1224 S ksmbd.mountd -c /tmp/smb.conf -u /tmp/smb.db
1826 root 0 SW [ksmbd-vlan15]
1829 root 0 SW [ksmbd-br0]
1832 root 0 SW [ksmbd-eth1]
1835 root 0 SW [ksmbd-eth0]
2020 root 1100 R dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_rsa_key -p 22 -s
2021 root 1368 S -sh
2023 root 1368 R ps
root@EA8500:~# cat /tmp/smb.conf
[global]
log level = 1
netbios name = EA8500
server string =
syslog = 10
encrypt passwords = true
preferred master = yes
use sendfile = yes
aio read size = 2048
aio write size = 2048
large readwrite = yes
security = user
oplocks = yes
mangled names = no
max stat cache size = 64
workgroup =
bind interfaces only = yes
guest account = nobody
map to guest = Bad User
smb passwd file = /var/samba/smbpasswd
private dir = /var/samba
passdb backend = smbpasswd
log file = /var/smbd.log
max log size = 1000
socket options = TCP_NODELAY IPTOS_LOWDELAY SO_SNDBUF=262144 SO_RCVBUF=262144
read raw = yes
write raw = yes
max xmit = 65536
dead time = 15
getwd cache = yes
lpq cache time = 30
server min protocol = SMB2_02
server max protocol = SMB3_11
printing = none
load printers = No
usershare allow guests = Yes
smb3 encryption = no
[TEST]
comment = TEST
path = /mnt/sda/
read only = no
guest ok = no
valid users = mrjcd
force user = root
root@EA8500:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.230 (root@server2) (gcc version 10.0.1 (OpenWrt GCC 10.0.1 r12423-0493d57e04) ) #601 SMP Thu Jul 9 19:40:35 +03 2020
[ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt:Machine model: Linksys EA8500 WiFi Router
[ 0.000000] OF: fdt:Ignoring memory range 0x41500000 - 0x42000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 122880
[ 0.000000] free_area_init_node: node 0, pgdat c0b2d200, node_mem_map ddc39000
[ 0.000000] Normal zone: 960 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 122880 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 12 pages/cpu s18892 r8192 d22068 u49152
[ 0.000000] pcpu-alloc: s18892 r8192 d22068 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920
[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:14
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 478232K/491520K available (6144K kernel code, 184K rwdata, 1012K rodata, 1024K init, 407K bss, 13288K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xde800000 - 0xff800000 ( 528 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc0900000 (7136 kB)
[ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
[ 0.000000] .data : 0xc0b00000 - 0xc0b2e010 ( 185 kB)
[ 0.000000] .bss : 0xc0b30000 - 0xc0b95ecc ( 408 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[ 0.000006] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[ 0.000019] Switching to timer-based delay loop, resolution 160ns
[ 0.000182] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[ 0.000202] pid_max: default: 32768 minimum: 301
[ 0.000311] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000326] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000906] CPU: Testing write buffer coherency: ok
[ 0.001191] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001242] Setting up static identity map for 0x42300000 - 0x4230003c
[ 0.004276] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.004445] Brought up 2 CPUs
[ 0.004465] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[ 0.004474] CPU: All CPU(s) started in SVC mode.
[ 0.016825] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[ 0.017014] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.017043] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.017130] pinctrl core: initialized pinctrl subsystem
[ 0.018230] NET: Registered protocol family 16
[ 0.018566] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.041430] cpuidle: using governor ladder
[ 0.104694] msm_bus_fabric_init_driver
[ 0.105956] pps_core: LinuxPPS API ver. 1 registered
[ 0.105972] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.106004] PTP clock support registered
[ 0.107467] clocksource: Switched to clocksource dg_timer
[ 0.111503] NET: Registered protocol family 2
[ 0.112116] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.112160] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.112213] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.112265] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.112288] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.112463] NET: Registered protocol family 1
[ 0.112518] PCI: CLS 0 bytes, default 64
[ 0.116430] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.125806] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.131370] cryptodev: driver 1.9 loaded.
[ 0.131407] io scheduler noop registered
[ 0.131420] io scheduler deadline registered (default)
[ 0.133111] 1b500000.pci supply vdda not found, using dummy regulator
[ 0.133205] 1b500000.pci supply vdda_phy not found, using dummy regulator
[ 0.133291] 1b500000.pci supply vdda_refclk not found, using dummy regulator
[ 0.134046] OF: PCI: host bridge /soc/pci@1b500000 ranges:
[ 0.134088] OF: PCI: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[ 0.134114] OF: PCI: MEM 0x08000000..0x0fdfffff -> 0x08000000
[ 0.237857] qcom-pcie 1b500000.pci: link up
[ 0.238043] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[ 0.238066] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.238083] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
[ 0.238098] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[ 0.238149] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.238304] pci 0000:00:00.0: supports D1
[ 0.238315] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.238606] PCI: bus0: Fast back to back transfers disabled
[ 0.238928] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.239175] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.240331] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.240908] PCI: bus1: Fast back to back transfers disabled
[ 0.241189] pci 0000:00:00.0: BAR 14: assigned [mem 0x08000000-0x081fffff]
[ 0.241213] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[ 0.241348] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.241370] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
[ 0.241792] aer 0000:00:00.0:pcie002: service driver aer loaded
[ 0.242254] 1b700000.pci supply vdda not found, using dummy regulator
[ 0.242349] 1b700000.pci supply vdda_phy not found, using dummy regulator
[ 0.242445] 1b700000.pci supply vdda_refclk not found, using dummy regulator
[ 0.243177] OF: PCI: host bridge /soc/pci@1b700000 ranges:
[ 0.243212] OF: PCI: IO 0x31e00000..0x31efffff -> 0x31e00000
[ 0.243234] OF: PCI: MEM 0x2e000000..0x31dfffff -> 0x2e000000
[ 0.347851] qcom-pcie 1b700000.pci: link up
[ 0.348020] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[ 0.348038] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.348053] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[ 0.348095] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.348217] pci 0001:00:00.0: supports D1
[ 0.348226] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[ 0.348505] PCI: bus0: Fast back to back transfers disabled
[ 0.348804] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.349028] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.350099] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.350647] PCI: bus1: Fast back to back transfers disabled
[ 0.351023] pci 0001:00:00.0: BAR 14: assigned [mem 0x2e000000-0x2e1fffff]
[ 0.351046] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[ 0.351168] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 0.351187] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
[ 0.351556] aer 0001:00:00.0:pcie002: service driver aer loaded
[ 0.351999] 1b900000.pci supply vdda not found, using dummy regulator
[ 0.352084] 1b900000.pci supply vdda_phy not found, using dummy regulator
[ 0.352173] 1b900000.pci supply vdda_refclk not found, using dummy regulator
[ 0.352924] OF: PCI: host bridge /soc/pci@1b900000 ranges:
[ 0.352961] OF: PCI: IO 0x35e00000..0x35efffff -> 0x35e00000
[ 0.352982] OF: PCI: MEM 0x32000000..0x35dfffff -> 0x32000000
[ 1.357837] qcom-pcie 1b900000.pci: phy link never came up
[ 1.359688] qcom-pcie 1b900000.pci: hostinit failed
[ 1.360438] deviceless supply s1b not found, using dummy regulator
[ 1.362038] L2 @ QSB rate. Forcing new rate.
[ 1.362207] L2 @ 800000 KHz
[ 1.362316] CPU0 @ 800000 KHz
[ 1.362325] CPU1 @ QSB rate. Forcing new rate.
[ 1.362443] CPU1 @ 800000 KHz
[ 1.364527] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[ 1.366210] serial8250_init
[ 1.366224] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 1.367203] msm_serial 16340000.serial: msm_serial: detected port #0
[ 1.367277] msm_serial 16340000.serial: uartclk = 7372800
[ 1.367332] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 201, base_baud = 460800) is a MSM
[ 1.367366] msm_serial: console setup on port #0
[ 2.107581] console [ttyMSM0] enabled
[ 2.112403] msm_serial: driver initialized
[ 2.117501] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
[ 2.119793] nand: AMD/Spansion S34MS01G2
[ 2.126228] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 2.130610] 19 ofpart partitions found on MTD device qcom_nand.0
[ 2.137513] Creating 19 MTD partitions on "qcom_nand.0":
[ 2.143768] 0x000000000000-0x000000040000 : "SBL1"
[ 2.150295] 0x000000040000-0x000000180000 : "MIBIB"
[ 2.156011] 0x000000180000-0x0000002c0000 : "SBL2"
[ 2.160888] 0x0000002c0000-0x000000540000 : "SBL3"
[ 2.163793] random: fast init done
[ 2.171513] 0x000000540000-0x000000660000 : "DDRCONFIG"
[ 2.173815] 0x000000660000-0x000000780000 : "SSD"
[ 2.178859] 0x000000780000-0x000000a00000 : "TZ"
[ 2.185431] 0x000000a00000-0x000000c80000 : "RPM"
[ 2.190231] 0x000000c80000-0x000000dc0000 : "art"
[ 2.193048] 0x000000dc0000-0x000000ec0000 : "APPSBL"
[ 2.197419] 0x000000ec0000-0x000000f00000 : "u_env"
[ 2.201589] 0x000000f00000-0x000000f40000 : "s_env"
[ 2.206108] 0x000000f40000-0x000000f80000 : "devinfo"
[ 2.211050] 0x000000f80000-0x000003780000 : "linux"
[ 2.269168] 0x000001280000-0x000003780000 : "rootfs"
[ 2.318066] mtd: partition "rootfs" set to be root filesystem
[ 2.318101] 0x000003780000-0x000005f40000 : "linux2"
[ 2.375689] 0x000003a80000-0x000005f40000 : "rootfs2"
[ 2.424464] 0x000005f40000-0x000005f80000 : "nvram"
[ 2.425634] 0x000005f80000-0x000008000000 : "ddwrt"
[ 2.449387] random: crng init done
[ 2.472652] libphy: GPIO Bitbanged MDIO: probed
[ 2.475922] libphy: Fixed MDIO Bus: probed
[ 2.497522] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
[ 3.349284] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 3.349309] Ring mode enabled
[ 3.353305] DMA HW capability register supported
[ 3.356259] Enhanced/Alternate descriptors
[ 3.361899] Enabled extended descriptors
[ 3.364857] RX Checksum Offload Engine supported
[ 3.369081] COE Type 2
[ 3.373707] TX Checksum insertion supported
[ 3.375970] Wake-Up On Lan supported
[ 3.380551] eth%d: device MAC address 00:06:3b:01:41:00
[ 3.384044] Enable RX Mitigation via HW Watchdog Timer
[ 3.390340] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 3.394285] Ring mode enabled
[ 3.399576] DMA HW capability register supported
[ 3.402444] Enhanced/Alternate descriptors
[ 3.408161] Enabled extended descriptors
[ 3.411044] RX Checksum Offload Engine supported
[ 3.415212] COE Type 2
[ 3.419969] TX Checksum insertion supported
[ 3.422155] Wake-Up On Lan supported
[ 3.426672] eth%d: device MAC address 00:03:7f:ba:db:02
[ 3.430309] Enable RX Mitigation via HW Watchdog Timer
[ 3.436075] i2c /dev entries driver
[ 3.441173] Calibration not found.
[ 3.445025] CPUidle arm: CPU 0 failed to init idle CPU ops
[ 3.447942] GACT probability NOT on
[ 3.452893] Mirror/redirect action on
[ 3.456302] Simple TC action Loaded
[ 3.460724] netem: version 1.3
[ 3.463417] u32 classifier
[ 3.466510] Performance counters on
[ 3.469265] input device check on
[ 3.472936] Actions configured
[ 3.476763] Netfilter messages via NETLINK v0.30.
[ 3.480395] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 3.485426] nf_conntrack_rtsp v0.7 loading
[ 3.491177] xt_time: kernel timezone is -0000
[ 3.494830] ip_set: protocol 6
[ 3.499512] gre: GRE over IPv4 demultiplexor driver
[ 3.502614] nf_nat_rtsp v0.7 loading
[ 3.506989] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.511043] NET: Registered protocol family 17
[ 3.516153] Bridge firewalling registered
[ 3.520432] 8021q: 802.1Q VLAN Support v1.8
[ 3.524533] Registering SWP/SWPB emulation handler
[ 3.537877] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
[ 3.556308] s1a: Bringing 0uV into 1050000-1050000uV
[ 3.556570] s1b: Bringing 0uV into 1050000-1050000uV
[ 3.560632] s2a: Bringing 0uV into 800000-800000uV
[ 3.565505] s2b: Bringing 0uV into 800000-800000uV
[ 3.573782] trying to register driver cpufreq-dt
[ 3.576152] searching for nvram
[ 3.579532] nvram size = 262144
[ 3.624577] no valid UBI magic found inside mtd13
[ 3.624611] hctosys: unable to open rtc device (rtc0)
[ 3.640104] VFS: Mounted root (squashfs filesystem) readonly on device 31:14.
[ 3.641617] Freeing unused kernel memory: 1024K
[ 7.075495] Loading modules backported from Linux version v5.7-rc3-0-g6a8b55ed4056
[ 7.075524] Backport generated by backports.git v5.7-rc3-1-0-gc0c7d2bb
[ 7.547189] ath9k: ath9k: Driver unloaded
[ 7.866351] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 7.867049] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 8.049301] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[ 8.416666] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
[ 8.416702] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[ 8.427370] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.5.3-00050 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 5ae23169
[ 8.505650] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:2 crc32 792a3d38
[ 8.526946] ath10k_pci 0000:01:00.0: boot already acquired valid otp board id,skip download, board_id 2 chip_id 1
[ 9.796739] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[ 9.879527] ath: EEPROM regdomain sanitized
[ 9.879536] ath: EEPROM regdomain: 0x64
[ 9.879542] ath: EEPROM indicates we should expect a direct regpair map
[ 9.879553] ath: Country alpha2 being used: 00
[ 9.879558] ath: Regpair used: 0x64
[ 9.883619] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[ 9.884200] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 10.049156] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[ 10.049238] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
[ 10.058878] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[ 10.072532] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.5.3-00050 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 5ae23169
[ 10.135016] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:1 crc32 792a3d38
[ 10.156082] ath10k_pci 0001:01:00.0: boot already acquired valid otp board id,skip download, board_id 1 chip_id 1
[ 11.417989] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[ 11.500345] ath: EEPROM regdomain sanitized
[ 11.500355] ath: EEPROM regdomain: 0x64
[ 11.500362] ath: EEPROM indicates we should expect a direct regpair map
[ 11.500380] ath: Country alpha2 being used: 00
[ 11.500387] ath: Regpair used: 0x64
[ 12.654954] dwmac1000: Master AXI performs any burst length
[ 12.655020] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 12.659709] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[ 12.780931] dwmac1000: Master AXI performs any burst length
[ 12.780971] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 12.785425] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 13.677881] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 14.814066] device br0 entered promiscuous mode
[ 14.876275] br0: port 1(vlan1) entered blocking state
[ 14.876297] br0: port 1(vlan1) entered disabled state
[ 14.880560] device vlan1 entered promiscuous mode
[ 14.885330] device eth0 entered promiscuous mode
[ 14.890135] br0: port 1(vlan1) entered blocking state
[ 14.894705] br0: port 1(vlan1) entered forwarding state
[ 14.936251] br0: port 2(vlan2) entered blocking state
[ 14.936272] br0: port 2(vlan2) entered disabled state
[ 14.940552] device vlan2 entered promiscuous mode
[ 14.945344] br0: port 2(vlan2) entered blocking state
[ 14.950060] br0: port 2(vlan2) entered forwarding state
[ 14.962167] device br0 left promiscuous mode
[ 14.964410] device br0 entered promiscuous mode
[ 14.971563] device br0 left promiscuous mode
[ 15.065294] ath: EEPROM regdomain: 0x8348
[ 15.065300] ath: EEPROM indicates we should expect a country code
[ 15.065305] ath: doing EEPROM country->regdmn map search
[ 15.065309] ath: country maps to regdmn code: 0x3a
[ 15.065313] ath: Country alpha2 being used: US
[ 15.065316] ath: Regpair used: 0x3a
[ 15.065320] ath: regdomain 0x8348 dynamically updated by user
[ 15.065333] ath: EEPROM regdomain: 0x8348
[ 15.065335] ath: EEPROM indicates we should expect a country code
[ 15.065339] ath: doing EEPROM country->regdmn map search
[ 15.065342] ath: country maps to regdmn code: 0x3a
[ 15.065345] ath: Country alpha2 being used: US
[ 15.065348] ath: Regpair used: 0x3a
[ 15.065351] ath: regdomain 0x8348 dynamically updated by user
[ 15.331820] tun: Universal TUN/TAP device driver, 1.6
[ 15.331839] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 16.560300] Linux kernel CIFS/SMB SERVER 3.2.3 by Namjae Jeon <linkinjeon@kernel.org>
[ 17.328103] usbcore: registered new interface driver usbfs
[ 17.328199] usbcore: registered new interface driver hub
[ 17.332554] usbcore: registered new device driver usb
[ 17.379439] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 17.386626] ehci-platform: EHCI generic platform driver
[ 17.404570] ehci-pci: EHCI PCI platform driver
[ 17.461701] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 17.746348] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 17.746429] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 17.751009] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 17.758417] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
[ 17.769173] hub 1-0:1.0: USB hub found
[ 17.775420] hub 1-0:1.0: 1 port detected
[ 17.778301] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 17.780866] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 17.787510] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 17.795187] hub 2-0:1.0: USB hub found
[ 17.805696] hub 2-0:1.0: 1 port detected
[ 17.866263] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 17.869112] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 17.874501] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 17.881981] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
[ 17.891744] hub 3-0:1.0: USB hub found
[ 17.904652] hub 3-0:1.0: 1 port detected
[ 17.918210] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 17.918253] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 17.924201] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 17.932216] hub 4-0:1.0: USB hub found
[ 17.943035] hub 4-0:1.0: 1 port detected
[ 18.607862] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 22.988998] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 22.989035] usb usb4: USB disconnect, device number 1
[ 22.993508] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered
[ 22.998144] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 23.003803] usb usb3: USB disconnect, device number 1
[ 23.009244] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered
[ 23.013826] xhci-hcd xhci-hcd.0.auto: remove, state 1
[ 23.019600] usb usb2: USB disconnect, device number 1
[ 23.025314] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
[ 23.030195] xhci-hcd xhci-hcd.0.auto: remove, state 1
[ 23.035230] usb usb1: USB disconnect, device number 1
[ 23.040235] usb 1-1: USB disconnect, device number 2
[ 23.047945] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
[ 23.105378] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 23.105463] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 23.109983] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 23.117324] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
[ 23.126614] hub 1-0:1.0: USB hub found
[ 23.132351] hub 1-0:1.0: 1 port detected
[ 23.136116] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 23.139985] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 23.145300] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 23.153283] hub 2-0:1.0: USB hub found
[ 23.161174] hub 2-0:1.0: 1 port detected
[ 23.164994] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 23.168833] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 23.174168] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 23.181630] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
[ 23.190903] hub 3-0:1.0: USB hub found
[ 23.196509] hub 3-0:1.0: 1 port detected
[ 23.200421] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 23.204129] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 23.209582] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 23.217485] hub 4-0:1.0: USB hub found
[ 23.225435] hub 4-0:1.0: 1 port detected
[ 23.277517] SCSI subsystem initialized
[ 23.378597] usbcore: registered new interface driver usb-storage
[ 23.456261] libata version 3.00 loaded.
[ 23.497865] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 23.501106] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
[ 23.503304] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 23.508846] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
[ 23.518342] scsi host0: ahci
[ 23.525775] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 95
[ 23.674769] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 23.674988] scsi host1: usb-storage 1-1:1.0
[ 23.859254] ata1: SATA link down (SStatus 0 SControl 300)
[ 24.024678] sdhci: Secure Digital Host Controller Interface driver
[ 24.024702] sdhci: Copyright(c) Pierre Ossman
[ 24.037196] sdhci-pltfm: SDHCI platform and OF driver helper
[ 24.719569] scsi 1:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4
[ 24.721014] sd 1:0:0:0: [sda] 31457280 512-byte logical blocks: (16.1 GB/15.0 GiB)
[ 24.727429] sd 1:0:0:0: [sda] Write Protect is off
[ 24.734189] sd 1:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 24.734939] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 24.744996] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 24.913575] ksmbd: kill command received
[ 25.660837] EXT4-fs (sda): Ignoring removed nobh option
[ 25.663117] EXT4-fs (sda): barriers disabled
[ 25.669823] EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: init_itable=0,nobarrier,nobh,barrier=0
[ 26.123336] Linux kernel CIFS/SMB SERVER 3.2.3 by Namjae Jeon <linkinjeon@kernel.org>
[ 114.196685] ksmbd: kill command received
[ 114.714408] Linux kernel CIFS/SMB SERVER 3.2.3 by Namjae Jeon <linkinjeon@kernel.org>
root@EA8500:~# uptime
06:58:01 up 17 min, load average: 0.00, 0.00, 0.00
root@EA8500:~# date
Sat Jul 11 06:58:03 CDT 2020
root@EA8500:~# dmesg | tail -5
[ 25.663117] EXT4-fs (sda): barriers disabled
[ 25.669823] EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: init_itable=0,nobarrier,nobh,barrier=0
[ 26.123336] Linux kernel CIFS/SMB SERVER 3.2.3 by Namjae Jeon <linkinjeon@kernel.org>
[ 114.196685] ksmbd: kill command received
[ 114.714408] Linux kernel CIFS/SMB SERVER 3.2.3 by Namjae Jeon <linkinjeon@kernel.org>
root@EA8500:~# cat /tmp/var/log/messages
Dec 31 18:00:14 EA8500 syslog.info syslogd started: BusyBox v1.32.0
Dec 31 18:00:14 EA8500 user.info : syslogd : daemon successfully started
Dec 31 18:00:14 EA8500 user.info : klogd : daemon successfully started
Dec 31 18:00:14 EA8500 kern.notice kernel: klogd started: BusyBox v1.32.0 (2020-07-11 13:52:57 +03)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Booting Linux on physical CPU 0x0
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] Linux version 4.9.230 (root@server2) (gcc version 10.0.1 (OpenWrt GCC 10.0.1 r12423-0493d57e04) ) #601 SMP Thu Jul 9 19:40:35 +03 2020
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] CPU: div instructions available: patching division code
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] OF: fdt:Machine model: Linksys EA8500 WiFi Router
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.000000] OF: fdt:Ignoring memory range 0x41500000 - 0x42000000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Memory policy: Data cache writealloc
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] On node 0 totalpages: 122880
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat c0b2d200, node_mem_map ddc39000
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] Normal zone: 960 pages used for memmap
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] Normal zone: 122880 pages, LIFO batch:31
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] percpu: Embedded 12 pages/cpu s18892 r8192 d22068 u49152
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] pcpu-alloc: s18892 r8192 d22068 u49152 alloc=12*4096
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:14
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Memory: 478232K/491520K available (6144K kernel code, 184K rwdata, 1012K rodata, 1024K init, 407K bss, 13288K reserved, 0K cma-reserved, 0K highmem)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] Virtual kernel memory layout:
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] vmalloc : 0xde800000 - 0xff800000 ( 528 MB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] .text : 0xc0208000 - 0xc0900000 (7136 kB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] .data : 0xc0b00000 - 0xc0b2e010 ( 185 kB)
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 0.000000] .bss : 0xc0b30000 - 0xc0b95ecc ( 408 kB)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] Hierarchical RCU implementation.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] NR_IRQS:16 nr_irqs:16 16
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000006] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000019] Switching to timer-based delay loop, resolution 160ns
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000182] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000202] pid_max: default: 32768 minimum: 301
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000311] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000326] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.000906] CPU: Testing write buffer coherency: ok
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.001191] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.001242] Setting up static identity map for 0x42300000 - 0x4230003c
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.004276] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.004445] Brought up 2 CPUs
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.004465] SMP: Total of 2 processors activated (25.00 BogoMIPS).
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.004474] CPU: All CPU(s) started in SVC mode.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.016825] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.017014] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.017043] futex hash table entries: 512 (order: 3, 32768 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.017130] pinctrl core: initialized pinctrl subsystem
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.018230] NET: Registered protocol family 16
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.018566] DMA: preallocated 256 KiB pool for atomic coherent allocations
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.041430] cpuidle: using governor ladder
Dec 31 18:00:14 EA8500 kern.err kernel: [ 0.104694] msm_bus_fabric_init_driver
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.105956] pps_core: LinuxPPS API ver. 1 registered
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.105972] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.106004] PTP clock support registered
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.107467] clocksource: Switched to clocksource dg_timer
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.111503] NET: Registered protocol family 2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.112116] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.112160] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.112213] TCP: Hash tables configured (established 4096 bind 4096)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.112265] UDP hash table entries: 256 (order: 1, 8192 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.112288] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.112463] NET: Registered protocol family 1
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.112518] PCI: CLS 0 bytes, default 64
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.116430] workingset: timestamp_bits=30 max_order=17 bucket_order=0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.125806] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.131370] cryptodev: driver 1.9 loaded.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.131407] io scheduler noop registered
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.131420] io scheduler deadline registered (default)
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.133111] 1b500000.pci supply vdda not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.133205] 1b500000.pci supply vdda_phy not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.133291] 1b500000.pci supply vdda_refclk not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.134046] OF: PCI: host bridge /soc/pci@1b500000 ranges:
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.134088] OF: PCI: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.134114] OF: PCI: MEM 0x08000000..0x0fdfffff -> 0x08000000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.237857] qcom-pcie 1b500000.pci: link up
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.238043] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.238066] pci_bus 0000:00: root bus resource [bus 00-ff]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.238083] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.238098] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.238149] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.238304] pci 0000:00:00.0: supports D1
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.238315] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.238606] PCI: bus0: Fast back to back transfers disabled
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.238928] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.239175] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.240331] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.240908] PCI: bus1: Fast back to back transfers disabled
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.241189] pci 0000:00:00.0: BAR 14: assigned [mem 0x08000000-0x081fffff]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.241213] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.241348] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.241370] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.241792] aer 0000:00:00.0:pcie002: service driver aer loaded
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.242254] 1b700000.pci supply vdda not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.242349] 1b700000.pci supply vdda_phy not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.242445] 1b700000.pci supply vdda_refclk not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.243177] OF: PCI: host bridge /soc/pci@1b700000 ranges:
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.243212] OF: PCI: IO 0x31e00000..0x31efffff -> 0x31e00000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.243234] OF: PCI: MEM 0x2e000000..0x31dfffff -> 0x2e000000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.347851] qcom-pcie 1b700000.pci: link up
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.348020] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.348038] pci_bus 0001:00: root bus resource [bus 00-ff]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.348053] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.348095] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.348217] pci 0001:00:00.0: supports D1
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.348226] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.348505] PCI: bus0: Fast back to back transfers disabled
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.348804] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.349028] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.350099] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.350647] PCI: bus1: Fast back to back transfers disabled
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.351023] pci 0001:00:00.0: BAR 14: assigned [mem 0x2e000000-0x2e1fffff]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.351046] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.351168] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.351187] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 0.351556] aer 0001:00:00.0:pcie002: service driver aer loaded
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.351999] 1b900000.pci supply vdda not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.352084] 1b900000.pci supply vdda_phy not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 0.352173] 1b900000.pci supply vdda_refclk not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.352924] OF: PCI: host bridge /soc/pci@1b900000 ranges:
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.352961] OF: PCI: IO 0x35e00000..0x35efffff -> 0x35e00000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 0.352982] OF: PCI: MEM 0x32000000..0x35dfffff -> 0x32000000
Dec 31 18:00:14 EA8500 kern.err kernel: [ 1.357837] qcom-pcie 1b900000.pci: phy link never came up
Dec 31 18:00:14 EA8500 kern.err kernel: [ 1.359688] qcom-pcie 1b900000.pci: hostinit failed
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 1.360438] deviceless supply s1b not found, using dummy regulator
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.362038] L2 @ QSB rate. Forcing new rate.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.362207] L2 @ 800000 KHz
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.362316] CPU0 @ 800000 KHz
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.362325] CPU1 @ QSB rate. Forcing new rate.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.362443] CPU1 @ 800000 KHz
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.364527] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.366210] serial8250_init
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.366224] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.367203] msm_serial 16340000.serial: msm_serial: detected port #0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.367277] msm_serial 16340000.serial: uartclk = 7372800
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.367332] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 201, base_baud = 460800) is a MSM
Dec 31 18:00:14 EA8500 kern.info kernel: [ 1.367366] msm_serial: console setup on port #0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.107581] console [ttyMSM0] enabled
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.112403] msm_serial: driver initialized
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.117501] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.119793] nand: AMD/Spansion S34MS01G2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.126228] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.130610] 19 ofpart partitions found on MTD device qcom_nand.0
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.137513] Creating 19 MTD partitions on "qcom_nand.0":
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.143768] 0x000000000000-0x000000040000 : "SBL1"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.150295] 0x000000040000-0x000000180000 : "MIBIB"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.156011] 0x000000180000-0x0000002c0000 : "SBL2"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.160888] 0x0000002c0000-0x000000540000 : "SBL3"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.163793] random: fast init done
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.171513] 0x000000540000-0x000000660000 : "DDRCONFIG"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.173815] 0x000000660000-0x000000780000 : "SSD"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.178859] 0x000000780000-0x000000a00000 : "TZ"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.185431] 0x000000a00000-0x000000c80000 : "RPM"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.190231] 0x000000c80000-0x000000dc0000 : "art"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.193048] 0x000000dc0000-0x000000ec0000 : "APPSBL"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.197419] 0x000000ec0000-0x000000f00000 : "u_env"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.201589] 0x000000f00000-0x000000f40000 : "s_env"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.206108] 0x000000f40000-0x000000f80000 : "devinfo"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.211050] 0x000000f80000-0x000003780000 : "linux"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.269168] 0x000001280000-0x000003780000 : "rootfs"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.318066] mtd: partition "rootfs" set to be root filesystem
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.318101] 0x000003780000-0x000005f40000 : "linux2"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.375689] 0x000003a80000-0x000005f40000 : "rootfs2"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.424464] 0x000005f40000-0x000005f80000 : "nvram"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.425634] 0x000005f80000-0x000008000000 : "ddwrt"
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 2.449387] random: crng init done
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.472652] libphy: GPIO Bitbanged MDIO: probed
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.475922] libphy: Fixed MDIO Bus: probed
Dec 31 18:00:14 EA8500 kern.info kernel: [ 2.497522] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.349284] stmmac - user ID: 0x10, Synopsys ID: 0x37
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.349309] Ring mode enabled
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.353305] DMA HW capability register supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.356259] Enhanced/Alternate descriptors
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.361899] Enabled extended descriptors
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.364857] RX Checksum Offload Engine supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.369081] COE Type 2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.373707] TX Checksum insertion supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.375970] Wake-Up On Lan supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.380551] eth%d: device MAC address 00:06:3b:01:41:00
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.384044] Enable RX Mitigation via HW Watchdog Timer
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.390340] stmmac - user ID: 0x10, Synopsys ID: 0x37
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.394285] Ring mode enabled
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.399576] DMA HW capability register supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.402444] Enhanced/Alternate descriptors
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.408161] Enabled extended descriptors
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.411044] RX Checksum Offload Engine supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.415212] COE Type 2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.419969] TX Checksum insertion supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.422155] Wake-Up On Lan supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.426672] eth%d: device MAC address 00:03:7f:ba:db:02
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.430309] Enable RX Mitigation via HW Watchdog Timer
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.436075] i2c /dev entries driver
Dec 31 18:00:14 EA8500 kern.err kernel: [ 3.441173] Calibration not found.
Dec 31 18:00:14 EA8500 kern.err kernel: [ 3.445025] CPUidle arm: CPU 0 failed to init idle CPU ops
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.447942] GACT probability NOT on
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.452893] Mirror/redirect action on
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.456302] Simple TC action Loaded
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.460724] netem: version 1.3
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.463417] u32 classifier
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.466510] Performance counters on
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.469265] input device check on
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.472936] Actions configured
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.476763] Netfilter messages via NETLINK v0.30.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.480395] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 3.485426] nf_conntrack_rtsp v0.7 loading
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.491177] xt_time: kernel timezone is -0000
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.494830] ip_set: protocol 6
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.499512] gre: GRE over IPv4 demultiplexor driver
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 3.502614] nf_nat_rtsp v0.7 loading
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.506989] ip_tables: (C) 2000-2006 Netfilter Core Team
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.511043] NET: Registered protocol family 17
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 3.516153] Bridge firewalling registered
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.520432] 8021q: 802.1Q VLAN Support v1.8
Dec 31 18:00:14 EA8500 kern.notice kernel: [ 3.524533] Registering SWP/SWPB emulation handler
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.537877] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.556308] s1a: Bringing 0uV into 1050000-1050000uV
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.556570] s1b: Bringing 0uV into 1050000-1050000uV
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.560632] s2a: Bringing 0uV into 800000-800000uV
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.565505] s2b: Bringing 0uV into 800000-800000uV
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.573782] trying to register driver cpufreq-dt
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.576152] searching for nvram
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.579532] nvram size = 262144
Dec 31 18:00:14 EA8500 kern.err kernel: [ 3.624577] no valid UBI magic found inside mtd13
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.624611] hctosys: unable to open rtc device (rtc0)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.640104] VFS: Mounted root (squashfs filesystem) readonly on device 31:14.
Dec 31 18:00:14 EA8500 kern.info kernel: [ 3.641617] Freeing unused kernel memory: 1024K
Dec 31 18:00:14 EA8500 kern.info kernel: [ 7.075495] Loading modules backported from Linux version v5.7-rc3-0-g6a8b55ed4056
Dec 31 18:00:14 EA8500 kern.info kernel: [ 7.075524] Backport generated by backports.git v5.7-rc3-1-0-gc0c7d2bb
Dec 31 18:00:14 EA8500 kern.info kernel: [ 7.547189] ath9k: ath9k: Driver unloaded
Dec 31 18:00:14 EA8500 kern.info kernel: [ 7.866351] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 7.867049] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 8.049301] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.416666] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.416702] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.427370] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.5.3-00050 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 5ae23169
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.505650] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:2 crc32 792a3d38
Dec 31 18:00:14 EA8500 kern.info kernel: [ 8.526946] ath10k_pci 0000:01:00.0: boot already acquired valid otp board id,skip download, board_id 2 chip_id 1
Dec 31 18:00:14 EA8500 kern.info kernel: [ 9.796739] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 9.879527] ath: EEPROM regdomain sanitized
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 9.879536] ath: EEPROM regdomain: 0x64
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 9.879542] ath: EEPROM indicates we should expect a direct regpair map
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 9.879553] ath: Country alpha2 being used: 00
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 9.879558] ath: Regpair used: 0x64
Dec 31 18:00:14 EA8500 kern.info kernel: [ 9.883619] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
Dec 31 18:00:14 EA8500 kern.info kernel: [ 9.884200] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Dec 31 18:00:14 EA8500 kern.warn kernel: [ 10.049156] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.049238] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.058878] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.072532] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.5.3-00050 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 5ae23169
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.135016] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:1 crc32 792a3d38
Dec 31 18:00:14 EA8500 kern.info kernel: [ 10.156082] ath10k_pci 0001:01:00.0: boot already acquired valid otp board id,skip download, board_id 1 chip_id 1
Dec 31 18:00:14 EA8500 kern.info kernel: [ 11.417989] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 11.500345] ath: EEPROM regdomain sanitized
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 11.500355] ath: EEPROM regdomain: 0x64
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 11.500362] ath: EEPROM indicates we should expect a direct regpair map
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 11.500380] ath: Country alpha2 being used: 00
Dec 31 18:00:14 EA8500 kern.debug kernel: [ 11.500387] ath: Regpair used: 0x64
Dec 31 18:00:14 EA8500 kern.info kernel: [ 12.654954] dwmac1000: Master AXI performs any burst length
Dec 31 18:00:14 EA8500 kern.info kernel: [ 12.655020] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 12.659709] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
Dec 31 18:00:14 EA8500 kern.info kernel: [ 12.780931] dwmac1000: Master AXI performs any burst length
Dec 31 18:00:14 EA8500 kern.info kernel: [ 12.780971] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
Dec 31 18:00:14 EA8500 kern.info kernel: [ 12.785425] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
Dec 31 18:00:14 EA8500 kern.info kernel: [ 13.677881] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
Dec 31 18:00:14 EA8500 daemon.info smartd[846]: smartd 7.1 2019-12-30 r5022 [armv7l-linux-4.9.230] (local build)
Dec 31 18:00:14 EA8500 daemon.info smartd[846]: Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
Dec 31 18:00:14 EA8500 daemon.info smartd[846]: Opened configuration file /usr/etc/smartd.conf
Dec 31 18:00:14 EA8500 daemon.info smartd[846]: Drive: DEVICESCAN, implied '-a' Directive on line 32 of file /usr/etc/smartd.conf
Dec 31 18:00:14 EA8500 daemon.info smartd[846]: Configuration file /usr/etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Dec 31 18:00:14 EA8500 daemon.crit smartd[846]: In the system's table of devices NO devices found to scan
Dec 31 18:00:14 EA8500 daemon.info smartd[846]: Unable to monitor any SMART enabled devices. Try debug (-d) option. Exiting...
Dec 31 18:00:14 EA8500 user.info : resetbutton : resetbutton daemon successfully started
Dec 31 18:00:14 EA8500 user.info : bridge : bridge br0 successfully added
Dec 31 18:00:14 EA8500 daemon.info mstpd[739]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
Dec 31 18:00:14 EA8500 daemon.info mstpd[739]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
Dec 31 18:00:14 EA8500 daemon.info mstpd[739]: error, CTL_set_msti_bridge_config: Couldn't find bridge with index 9
Dec 31 18:00:14 EA8500 user.info : bridge : interface wlan0 successfully deleted from bridge br0
Dec 31 18:00:14 EA8500 user.info : bridge : interface wlan1 successfully deleted from bridge br0
Dec 31 18:00:14 EA8500 user.info : bridge : bridge br0 successfully added
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.814066] device br0 entered promiscuous mode
Dec 31 18:00:14 EA8500 daemon.info mstpd[739]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
Dec 31 18:00:14 EA8500 daemon.info mstpd[739]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
Dec 31 18:00:14 EA8500 user.info : bridge : interface vlan1 successfully added to bridge br0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.876275] br0: port 1(vlan1) entered blocking state
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.876297] br0: port 1(vlan1) entered disabled state
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.880560] device vlan1 entered promiscuous mode
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.885330] device eth0 entered promiscuous mode
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.890135] br0: port 1(vlan1) entered blocking state
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.894705] br0: port 1(vlan1) entered forwarding state
Dec 31 18:00:14 EA8500 user.info : bridge : interface vlan2 successfully added to bridge br0
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.936251] br0: port 2(vlan2) entered blocking state
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.936272] br0: port 2(vlan2) entered disabled state
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.940552] device vlan2 entered promiscuous mode
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.945344] br0: port 2(vlan2) entered blocking state
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.950060] br0: port 2(vlan2) entered forwarding state
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.962167] device br0 left promiscuous mode
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.964410] device br0 entered promiscuous mode
Dec 31 18:00:14 EA8500 kern.info kernel: [ 14.971563] device br0 left promiscuous mode
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.065294] ath: EEPROM regdomain: 0x8348
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.065300] ath: EEPROM indicates we should expect a country code
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.065305] ath: doing EEPROM country->regdmn map search
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.065309] ath: country maps to regdmn code: 0x3a
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.065313] ath: Country alpha2 being used: US
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.065316] ath: Regpair used: 0x3a
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.065320] ath: regdomain 0x8348 dynamically updated by user
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.065333] ath: EEPROM regdomain: 0x8348
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.065335] ath: EEPROM indicates we should expect a country code
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.065339] ath: doing EEPROM country->regdmn map search
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.065342] ath: country maps to regdmn code: 0x3a
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.065345] ath: Country alpha2 being used: US
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.065348] ath: Regpair used: 0x3a
Dec 31 18:00:15 EA8500 kern.debug kernel: [ 15.065351] ath: regdomain 0x8348 dynamically updated by user
Dec 31 18:00:15 EA8500 user.info : klogd : kernel log daemon successfully stopped
Dec 31 18:00:15 EA8500 user.info : wland : daemon successfully started
Dec 31 18:00:15 EA8500 user.info : hwmon : successfully started
Dec 31 18:00:15 EA8500 kern.notice kernel: klogd: exiting
Dec 31 18:00:15 EA8500 daemon.info smartd[995]: smartd 7.1 2019-12-30 r5022 [armv7l-linux-4.9.230] (local build)
Dec 31 18:00:15 EA8500 daemon.info smartd[995]: Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
Dec 31 18:00:15 EA8500 daemon.info smartd[995]: Opened configuration file /usr/etc/smartd.conf
Dec 31 18:00:15 EA8500 daemon.info smartd[995]: Drive: DEVICESCAN, implied '-a' Directive on line 32 of file /usr/etc/smartd.conf
Dec 31 18:00:15 EA8500 daemon.info smartd[995]: Configuration file /usr/etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Dec 31 18:00:15 EA8500 daemon.crit smartd[995]: In the system's table of devices NO devices found to scan
Dec 31 18:00:15 EA8500 daemon.info smartd[995]: Unable to monitor any SMART enabled devices. Try debug (-d) option. Exiting...
Dec 31 18:00:15 EA8500 user.info : openvpn : OpenVPN daemon (Server) starting/restarting...
Dec 31 18:00:15 EA8500 user.info : syslogd : syslog daemon successfully stopped
Dec 31 18:00:15 EA8500 syslog.info syslogd exiting
Dec 31 18:00:15 EA8500 syslog.info syslogd started: BusyBox v1.32.0
Dec 31 18:00:15 EA8500 user.info : dropbear : ssh daemon successfully started
Dec 31 18:00:15 EA8500 authpriv.info dropbear[1027]: Running in background
Dec 31 18:00:15 EA8500 user.info : klogd : daemon successfully started
Dec 31 18:00:15 EA8500 user.info : cron : daemon successfully started
Dec 31 18:00:15 EA8500 kern.notice kernel: klogd started: BusyBox v1.32.0 (2020-07-11 13:52:57 +03)
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.331820] tun: Universal TUN/TAP device driver, 1.6
Dec 31 18:00:15 EA8500 kern.info kernel: [ 15.331839] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Dec 31 18:00:15 EA8500 cron.info cron[1035]: (CRON) STARTUP (fork ok)
Dec 31 18:00:15 EA8500 daemon.info dnsmasq[1060]: started, version 2.81 cachesize 1500
Dec 31 18:00:15 EA8500 daemon.info dnsmasq[1060]: compile time options: IPv6 GNU-getopt no-DBus no-UBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP no-conntrack no-ipset no-auth DNSSEC loop-detect no-inotify no-dumpfile
Dec 31 18:00:15 EA8500 daemon.warn dnsmasq[1060]: warning: interface vlan15 does not currently exist
Dec 31 18:00:15 EA8500 daemon.info dnsmasq-dhcp[1060]: DHCP, IP range 192.168.1.6 -- 192.168.1.10, lease time 12h
Dec 31 18:00:15 EA8500 user.info : dnsmasq : daemon successfully started
Dec 31 18:00:15 EA8500 daemon.info dnsmasq[1060]: using only locally-known addresses for domain test
Dec 31 18:00:15 EA8500 daemon.info dnsmasq[1060]: using only locally-known addresses for domain onion
Dec 31 18:00:15 EA8500 daemon.info dnsmasq[1060]: using only locally-known addresses for domain localhost
Dec 31 18:00:15 EA8500 daemon.info dnsmasq[1060]: using only locally-known addresses for domain local
Dec 31 18:00:15 EA8500 daemon.info dnsmasq[1060]: using only locally-known addresses for domain invalid
Dec 31 18:00:15 EA8500 daemon.info dnsmasq[1060]: using only locally-known addresses for domain bind
Dec 31 18:00:15 EA8500 daemon.info dnsmasq[1060]: reading /tmp/resolv.dnsmasq
Dec 31 18:00:15 EA8500 daemon.info dnsmasq[1060]: using only locally-known addresses for domain test
Dec 31 18:00:15 EA8500 daemon.info dnsmasq[1060]: using only locally-known addresses for domain onion
Dec 31 18:00:15 EA8500 daemon.info dnsmasq[1060]: using only locally-known addresses for domain localhost
Dec 31 18:00:15 EA8500 daemon.info dnsmasq[1060]: using only locally-known addresses for domain local
Dec 31 18:00:15 EA8500 daemon.info dnsmasq[1060]: using only locally-known addresses for domain invalid
Dec 31 18:00:15 EA8500 daemon.info dnsmasq[1060]: using only locally-known addresses for domain bind
Dec 31 18:00:15 EA8500 daemon.info dnsmasq[1060]: using nameserver 10.72.28.13#53
Dec 31 18:00:15 EA8500 daemon.info dnsmasq[1060]: read /etc/hosts - 3 addresses
Dec 31 18:00:15 EA8500 daemon.warn openvpn[1015]: WARNING: Using --management on a TCP port WITHOUT passwords is STRONGLY discouraged and considered insecure
Dec 31 18:00:15 EA8500 daemon.notice openvpn[1015]: OpenVPN 2.4.9 arm-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD] built on Jul 11 2020
Dec 31 18:00:15 EA8500 daemon.notice openvpn[1015]: library versions: OpenSSL 1.1.1g 21 Apr 2020, LZO 2.09
Dec 31 18:00:15 EA8500 daemon.notice openvpn[1068]: MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:14
Dec 31 18:00:15 EA8500 daemon.warn openvpn[1068]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1068]: Diffie-Hellman initialized with 2048 bit key
Dec 31 18:00:16 EA8500 daemon.warn openvpn[1068]: WARNING: Your certificate is not yet valid!
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1068]: TUN/TAP device tun2 opened
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1068]: TUN/TAP TX queue length set to 100
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1068]: /sbin/ifconfig tun2 10.19.92.225 netmask 255.255.255.224 mtu 1500 broadcast 10.19.92.255
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1068]: Socket Buffers: R=[180224->180224] S=[180224->180224]
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1068]: UDPv4 link local (bound): [AF_INET][undef]:xxxxx
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1068]: UDPv4 link remote: [AF_UNSPEC]
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1068]: MULTI: multi_init called, r=256 v=256
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1068]: IFCONFIG POOL: base=10.19.92.226 size=28, ipv6=0
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1068]: IFCONFIG POOL LIST
Dec 31 18:00:16 EA8500 daemon.notice openvpn[1068]: Initialization Sequence Completed
Dec 31 18:00:16 EA8500 user.info : dnsmasq : daemon successfully stopped
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1060]: exiting on receipt of SIGTERM
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1185]: started, version 2.81 cachesize 1500
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1185]: compile time options: IPv6 GNU-getopt no-DBus no-UBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP no-conntrack no-ipset no-auth DNSSEC loop-detect no-inotify no-dumpfile
Dec 31 18:00:16 EA8500 daemon.warn dnsmasq[1185]: warning: interface vlan15 does not currently exist
Dec 31 18:00:16 EA8500 daemon.info dnsmasq-dhcp[1185]: DHCP, IP range 192.168.1.6 -- 192.168.1.10, lease time 12h
Dec 31 18:00:16 EA8500 user.info : dnsmasq : daemon successfully started
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1185]: using only locally-known addresses for domain test
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1185]: using only locally-known addresses for domain onion
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1185]: using only locally-known addresses for domain localhost
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1185]: using only locally-known addresses for domain local
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1185]: using only locally-known addresses for domain invalid
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1185]: using only locally-known addresses for domain bind
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1185]: reading /tmp/resolv.dnsmasq
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1185]: using only locally-known addresses for domain test
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1185]: using only locally-known addresses for domain onion
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1185]: using only locally-known addresses for domain localhost
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1185]: using only locally-known addresses for domain local
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1185]: using only locally-known addresses for domain invalid
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1185]: using only locally-known addresses for domain bind
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1185]: using nameserver 10.72.28.13#53
Dec 31 18:00:16 EA8500 daemon.info dnsmasq[1185]: read /etc/hosts - 3 addresses
Dec 31 18:00:16 EA8500 user.info : wland : daemon successfully stopped
Dec 31 18:00:16 EA8500 user.info : wland : daemon successfully started
Dec 31 18:00:16 EA8500 kern.info kernel: [ 16.560300] Linux kernel CIFS/SMB SERVER 3.2.3 by Namjae Jeon <linkinjeon@kernel.org>
Dec 31 18:00:16 EA8500 user.info wsdd2[1194]: starting.
Dec 31 18:00:16 EA8500 user.info : smbd : samba started
Dec 31 18:00:17 EA8500 user.info : sfe : shortcut forwarding engine successfully stopped
Dec 31 18:00:17 EA8500 user.info : process_monitor : successfully started
Dec 31 18:00:17 EA8500 user.info : httpd : daemon successfully stopped
Dec 31 18:00:17 EA8500 user.info : httpd : http daemon successfully started
Dec 31 18:00:17 EA8500 user.info : resetbutton : daemon successfully stopped
Dec 31 18:00:17 EA8500 user.info : resetbutton : resetbutton daemon successfully started
Dec 31 18:00:17 EA8500 daemon.info httpd[1293]: httpd : httpd server started at port 80
Dec 31 18:00:17 EA8500 user.info : httpd : http daemon successfully started
Dec 31 18:00:17 EA8500 kern.info kernel: [ 17.328103] usbcore: registered new interface driver usbfs
Dec 31 18:00:17 EA8500 kern.info kernel: [ 17.328199] usbcore: registered new interface driver hub
Dec 31 18:00:17 EA8500 kern.info kernel: [ 17.332554] usbcore: registered new device driver usb
Dec 31 18:00:17 EA8500 kern.info kernel: [ 17.379439] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Dec 31 18:00:17 EA8500 kern.info kernel: [ 17.386626] ehci-platform: EHCI generic platform driver
Dec 31 18:00:17 EA8500 kern.info kernel: [ 17.404570] ehci-pci: EHCI PCI platform driver
Dec 31 18:00:17 EA8500 kern.info kernel: [ 17.461701] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Dec 31 18:00:17 EA8500 daemon.debug ntpclient[1287]: Connecting to 2.pool.ntp.org [23.31.21.164] ...
Jul 11 06:40:37 EA8500 daemon.info ntpclient[1287]: Time set from 2.pool.ntp.org [23.31.21.164].
Jul 11 06:40:37 EA8500 daemon.info process_monitor[1286]: cyclic NTP Update success (servers 2.pool.ntp.org 212.18.3.19 88.99.174.22)
Jul 11 06:40:37 EA8500 kern.info kernel: [ 17.746348] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Jul 11 06:40:37 EA8500 kern.info kernel: [ 17.746429] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
Jul 11 06:40:37 EA8500 kern.info kernel: [ 17.751009] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Jul 11 06:40:37 EA8500 kern.info kernel: [ 17.758417] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
Jul 11 06:40:37 EA8500 kern.info kernel: [ 17.769173] hub 1-0:1.0: USB hub found
Jul 11 06:40:37 EA8500 kern.info kernel: [ 17.775420] hub 1-0:1.0: 1 port detected
Jul 11 06:40:37 EA8500 kern.info kernel: [ 17.778301] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Jul 11 06:40:37 EA8500 kern.info kernel: [ 17.780866] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
Jul 11 06:40:37 EA8500 kern.info kernel: [ 17.787510] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Jul 11 06:40:37 EA8500 kern.info kernel: [ 17.795187] hub 2-0:1.0: USB hub found
Jul 11 06:40:37 EA8500 kern.info kernel: [ 17.805696] hub 2-0:1.0: 1 port detected
Jul 11 06:40:37 EA8500 daemon.debug process_monitor[1286]: Restarting cron (time sync change)
Jul 11 06:40:37 EA8500 user.info : cron : daemon successfully stopped
Jul 11 06:40:37 EA8500 kern.info kernel: [ 17.866263] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Jul 11 06:40:37 EA8500 kern.info kernel: [ 17.869112] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
Jul 11 06:40:37 EA8500 kern.info kernel: [ 17.874501] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Jul 11 06:40:37 EA8500 kern.info kernel: [ 17.881981] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
Jul 11 06:40:37 EA8500 user.info : cron : daemon successfully started
Jul 11 06:40:37 EA8500 kern.info kernel: [ 17.891744] hub 3-0:1.0: USB hub found
Jul 11 06:40:37 EA8500 cron.info cron[1375]: (CRON) STARTUP (fork ok)
Jul 11 06:40:37 EA8500 kern.info kernel: [ 17.904652] hub 3-0:1.0: 1 port detected
Jul 11 06:40:37 EA8500 user.info : process_monitor : daemon successfully stopped
Jul 11 06:40:37 EA8500 daemon.info process_monitor[1286]: process_monitor : cleanup timers
Jul 11 06:40:37 EA8500 kern.info kernel: [ 17.918210] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Jul 11 06:40:37 EA8500 kern.info kernel: [ 17.918253] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
Jul 11 06:40:37 EA8500 kern.info kernel: [ 17.924201] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
Jul 11 06:40:37 EA8500 daemon.warn dnsmasq-dhcp[1185]: no address range available for DHCP request via br0
Jul 11 06:40:37 EA8500 kern.info kernel: [ 17.932216] hub 4-0:1.0: USB hub found
Jul 11 06:40:37 EA8500 kern.info kernel: [ 17.943035] hub 4-0:1.0: 1 port detected
Jul 11 06:40:38 EA8500 kern.info kernel: [ 18.607862] usb 1-1: new high-speed USB device number 2 using xhci-hcd
Jul 11 06:40:39 EA8500 user.info : process_monitor : daemon hanging, send SIGKILL
Jul 11 06:40:39 EA8500 user.info : process_monitor : successfully started
Jul 11 06:40:39 EA8500 daemon.debug process_monitor[1388]: We need to re-update after 3600 seconds
Jul 11 06:40:39 EA8500 daemon.info process_monitor[1388]: process_monitor : set timer: 3600 seconds, callback: ntp_main()
Jul 11 06:40:42 EA8500 kern.info kernel: [ 22.988998] xhci-hcd xhci-hcd.1.auto: remove, state 1
Jul 11 06:40:42 EA8500 kern.info kernel: [ 22.989035] usb usb4: USB disconnect, device number 1
Jul 11 06:40:42 EA8500 kern.info kernel: [ 22.993508] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered
Jul 11 06:40:42 EA8500 kern.info kernel: [ 22.998144] xhci-hcd xhci-hcd.1.auto: remove, state 1
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.003803] usb usb3: USB disconnect, device number 1
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.009244] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.013826] xhci-hcd xhci-hcd.0.auto: remove, state 1
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.019600] usb usb2: USB disconnect, device number 1
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.025314] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.030195] xhci-hcd xhci-hcd.0.auto: remove, state 1
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.035230] usb usb1: USB disconnect, device number 1
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.040235] usb 1-1: USB disconnect, device number 2
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.047945] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.105378] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.105463] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.109983] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.117324] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.126614] hub 1-0:1.0: USB hub found
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.132351] hub 1-0:1.0: 1 port detected
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.136116] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.139985] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.145300] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.153283] hub 2-0:1.0: USB hub found
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.161174] hub 2-0:1.0: 1 port detected
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.164994] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.168833] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.174168] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.181630] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.190903] hub 3-0:1.0: USB hub found
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.196509] hub 3-0:1.0: 1 port detected
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.200421] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.204129] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.209582] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.217485] hub 4-0:1.0: USB hub found
Jul 11 06:40:42 EA8500 kern.info kernel: [ 23.225435] hub 4-0:1.0: 1 port detected
Jul 11 06:40:42 EA8500 kern.notice kernel: [ 23.277517] SCSI subsystem initialized
Jul 11 06:40:43 EA8500 kern.info kernel: [ 23.378597] usbcore: registered new interface driver usb-storage
Jul 11 06:40:43 EA8500 kern.debug kernel: [ 23.456261] libata version 3.00 loaded.
Jul 11 06:40:43 EA8500 kern.info kernel: [ 23.497865] usb 1-1: new high-speed USB device number 2 using xhci-hcd
Jul 11 06:40:43 EA8500 kern.info kernel: [ 23.501106] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
Jul 11 06:40:43 EA8500 kern.info kernel: [ 23.503304] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
Jul 11 06:40:43 EA8500 kern.info kernel: [ 23.508846] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
Jul 11 06:40:43 EA8500 kern.info kernel: [ 23.518342] scsi host0: ahci
Jul 11 06:40:43 EA8500 kern.info kernel: [ 23.525775] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 95
Jul 11 06:40:43 EA8500 kern.info kernel: [ 23.674769] usb-storage 1-1:1.0: USB Mass Storage device detected
Jul 11 06:40:43 EA8500 kern.info kernel: [ 23.674988] scsi host1: usb-storage 1-1:1.0
Jul 11 06:40:43 EA8500 kern.info kernel: [ 23.859254] ata1: SATA link down (SStatus 0 SControl 300)
Jul 11 06:40:43 EA8500 kern.info kernel: [ 24.024678] sdhci: Secure Digital Host Controller Interface driver
Jul 11 06:40:43 EA8500 kern.info kernel: [ 24.024702] sdhci: Copyright(c) Pierre Ossman
Jul 11 06:40:43 EA8500 kern.info kernel: [ 24.037196] sdhci-pltfm: SDHCI platform and OF driver helper
Jul 11 06:40:44 EA8500 kern.notice kernel: [ 24.719569] scsi 1:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4
Jul 11 06:40:44 EA8500 kern.notice kernel: [ 24.721014] sd 1:0:0:0: [sda] 31457280 512-byte logical blocks: (16.1 GB/15.0 GiB)
Jul 11 06:40:44 EA8500 kern.notice kernel: [ 24.727429] sd 1:0:0:0: [sda] Write Protect is off
Jul 11 06:40:44 EA8500 kern.debug kernel: [ 24.734189] sd 1:0:0:0: [sda] Mode Sense: 23 00 00 00
Jul 11 06:40:44 EA8500 kern.notice kernel: [ 24.734939] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Jul 11 06:40:44 EA8500 kern.notice kernel: [ 24.744996] sd 1:0:0:0: [sda] Attached SCSI removable disk
Jul 11 06:40:44 EA8500 user.info : cron : daemon successfully stopped
Jul 11 06:40:44 EA8500 user.info : wsdd2 : windows service discovery daemon successfully stopped
Jul 11 06:40:44 EA8500 user.err wsdd2[1194]: Terminated received.
Jul 11 06:40:44 EA8500 user.info wsdd2[1194]: terminating.
Jul 11 06:40:44 EA8500 user.info : ksmbd.mountd : samba daemon successfully stopped
Jul 11 06:40:44 EA8500 kern.info kernel: [ 24.913575] ksmbd: kill command received
Jul 11 06:40:45 EA8500 kern.warn kernel: [ 25.660837] EXT4-fs (sda): Ignoring removed nobh option
Jul 11 06:40:45 EA8500 kern.info kernel: [ 25.663117] EXT4-fs (sda): barriers disabled
Jul 11 06:40:45 EA8500 kern.info kernel: [ 25.669823] EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: init_itable=0,nobarrier,nobh,barrier=0
Jul 11 06:40:45 EA8500 user.info : cron : daemon successfully started
Jul 11 06:40:45 EA8500 cron.info cron[1574]: (CRON) STARTUP (fork ok)
Jul 11 06:40:45 EA8500 user.info wsdd2[1626]: starting.
Jul 11 06:40:45 EA8500 kern.info kernel: [ 26.123336] Linux kernel CIFS/SMB SERVER 3.2.3 by Namjae Jeon <linkinjeon@kernel.org>
Jul 11 06:40:45 EA8500 user.info : smbd : samba started
Jul 11 06:40:45 EA8500 local5.info ksmbd: [ksmbd-manager/1629]: INFO: Unlink orphaned '/tmp/ksmbd.lock'
Jul 11 06:41:21 EA8500 daemon.err httpd[1305]: httpd : Request Error Code 408: Unexpected connection close in intitial request
Jul 11 06:41:21 EA8500 daemon.err httpd[1305]: httpd : Request Error Code 408: Unexpected connection close in intitial request
Jul 11 06:42:13 EA8500 user.info : servicemanager : waiting for services to finish (5)...
Jul 11 06:42:13 EA8500 user.info : wsdd2 : windows service discovery daemon successfully stopped
Jul 11 06:42:13 EA8500 user.err wsdd2[1626]: Terminated received.
Jul 11 06:42:13 EA8500 user.info wsdd2[1626]: terminating.
Jul 11 06:42:13 EA8500 user.info : ksmbd.mountd : samba daemon successfully stopped
Jul 11 06:42:13 EA8500 kern.info kernel: [ 114.196685] ksmbd: kill command received
Jul 11 06:42:14 EA8500 kern.info kernel: [ 114.714408] Linux kernel CIFS/SMB SERVER 3.2.3 by Namjae Jeon <linkinjeon@kernel.org>
Jul 11 06:42:14 EA8500 user.info wsdd2[1818]: starting.
Jul 11 06:42:14 EA8500 user.info : smbd : samba started
Jul 11 06:42:14 EA8500 local5.info ksmbd: [ksmbd-manager/1821]: INFO: Unlink orphaned '/tmp/ksmbd.lock'
Jul 11 06:42:14 EA8500 user.info : sfe : shortcut forwarding engine successfully stopped
Jul 11 06:42:46 EA8500 authpriv.info dropbear[1900]: Child connection from 10.72.28.56:46580
Jul 11 06:42:46 EA8500 authpriv.notice dropbear[1900]: Pubkey auth succeeded for 'root' with key md5 02:dd:6e:8e:c8:bb:bc:e9:23:24:92:0d:ea:2c:7b:17 from 10.72.28.56:46580
Jul 11 06:43:47 EA8500 authpriv.info dropbear[1900]: Exit (root) from <10.72.28.56:46580>: Disconnect received
Jul 11 06:56:34 EA8500 authpriv.info dropbear[2020]: Child connection from 10.72.28.56:46828
Jul 11 06:56:34 EA8500 authpriv.notice dropbear[2020]: Pubkey auth succeeded for 'root' with key md5 02:dd:6e:8e:c8:bb:bc:e9:23:24:92:0d:ea:2c:7b:17 from 10.72.28.56:46828
root@EA8500:~# date
Sat Jul 11 06:59:24 CDT 2020
root@EA8500:~# exit
Connection to ea8500.mrjcd.com closed.
mrjcd@Will-Be-Was:~$
#
mrjcd@daDeb:~$ ssh root@ea8500.mrjcd.com
DD-WRT v3.0-r43761 std (c) 2020 NewMedia-NET GmbH
Release: 07/11/20
Board: Linksys EA8500
==========================================================
___ ___ _ _____ ______ ____ ___
/ _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \
/ // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // /
/____/____/ |__/|__/_/|_| /_/ |___/____(_)___/
DD-WRT v3.0
http://www.dd-wrt.com
==========================================================
BusyBox v1.32.0 (2020-07-11 13:52:57 +03) built-in shell (ash)
root@EA8500:~# cat /tmp/dnsmasq.conf
interface=br0
resolv-file=/tmp/resolv.dnsmasq
domain=mrjcd.com
bogus-priv
conf-file=/etc/rfc6761.conf
dhcp-option=252,"\n"
cache-size=1500
interface=vlan15
dhcp-option=vlan15,3,192.168.1.5
dhcp-range=vlan15,192.168.1.6,192.168.1.10,255.255.255.0,12h
root@EA8500:~# cat /tmp/resolv.dnsmasq
nameserver 10.72.28.13
root@EA8500:~# uptime
07:39:30 up 59 min, load average: 0.00, 0.00, 0.00
root@EA8500:~# date
Sat Jul 11 07:39:35 CDT 2020
root@EA8500:~# exit
Connection to ea8500.mrjcd.com closed.
mrjcd@daDeb:~$