reset to DD-WRT defaults
set local time zone live WAN is still connected to local net
enabled Syslogd / Klogd
enabl JFFS2 Support (Internal Flash Storage)
enable (Clean Internal Flash Storage)
Apply Settings
reboot
mrjcd@Deb:~$ telnet 192.168.1.1
Trying 192.168.1.1...
Connected to 192.168.1.1.
Escape character is '^]'.
DD-WRT v3.0-r41303 std (c) 2019 NewMedia-NET GmbH
Release: 10/12/19
Board: Linksys EA8500
DD-WRT login: root
Password:
==========================================================
___ ___ _ _____ ______ ____ ___
/ _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \
/ // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // /
/____/____/ |__/|__/_/|_| /_/ |___/____(_)___/
DD-WRT v3.0
http://www.dd-wrt.com
==========================================================
BusyBox v1.31.0 (2019-10-12 05:30:46 CEST) built-in shell (ash)
root@DD-WRT:~# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 21248 21248 0 100% /
none 512 0 512 0% /dev
root@DD-WRT:~# cat /tmp/var/log/messages
Dec 31 18:00:13 DD-WRT syslog.info syslogd started: BusyBox v1.31.0
Dec 31 18:00:13 DD-WRT user.info : klogd : daemon successfully started
Dec 31 18:00:13 DD-WRT kern.notice kernel: klogd started: BusyBox v1.31.0 (2019-10-12 05:30:46 CEST)
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.000000] Booting Linux on physical CPU 0x0
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 0.000000] Linux version 4.9.196 (root@server2) (gcc version 9.2.0 (OpenWrt GCC 9.2.0 r10880-cb3c4c713d) ) #480 SMP Thu Oct 10 02:29:07 CEST 2019
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.000000] CPU: div instructions available: patching division code
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.000000] OF: fdt:Machine model: Linksys EA8500 WiFi Router
Dec 31 18:00:13 DD-WRT kern.warn kernel: [ 0.000000] OF: fdt:Ignoring memory range 0x41500000 - 0x42000000
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.000000] Memory policy: Data cache writealloc
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 0.000000] On node 0 totalpages: 122880
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat c0b2d140, node_mem_map ddc39000
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 0.000000] Normal zone: 960 pages used for memmap
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 0.000000] Normal zone: 122880 pages, LIFO batch:31
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.000000] percpu: Embedded 12 pages/cpu s18892 r8192 d22068 u49152
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 0.000000] pcpu-alloc: s18892 r8192 d22068 u49152 alloc=12*4096
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:16
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.000000] Memory: 478236K/491520K available (5120K kernel code, 183K rwdata, 1028K rodata, 1024K init, 407K bss, 13284K reserved, 0K cma-reserved, 0K highmem)
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 0.000000] Virtual kernel memory layout:
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 0.000000] vmalloc : 0xde800000 - 0xff800000 ( 528 MB)
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB)
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 0.000000] .text : 0xc0208000 - 0xc0800000 (6112 kB)
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 0.000000] .data : 0xc0b00000 - 0xc0b2de28 ( 184 kB)
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 0.000000] .bss : 0xc0b2f000 - 0xc0b94ebc ( 408 kB)
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.000000] Hierarchical RCU implementation.
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.000000] NR_IRQS:16 nr_irqs:16 16
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.000008] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.000022] Switching to timer-based delay loop, resolution 160ns
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.000193] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.000216] pid_max: default: 32768 minimum: 301
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.000326] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.000341] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.000927] CPU: Testing write buffer coherency: ok
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.001236] Setting up static identity map for 0x42300000 - 0x4230003c
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.004511] Brought up 2 CPUs
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.004529] SMP: Total of 2 processors activated (25.00 BogoMIPS).
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.004539] CPU: All CPU(s) started in SVC mode.
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.017485] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.017683] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.017707] futex hash table entries: 512 (order: 3, 32768 bytes)
Dec 31 18:00:13 DD-WRT user.info : resetbutton : resetbutton daemon successfully started
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.017787] pinctrl core: initialized pinctrl subsystem
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.018921] NET: Registered protocol family 16
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.019272] DMA: preallocated 256 KiB pool for atomic coherent allocations
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.051804] cpuidle: using governor ladder
Dec 31 18:00:13 DD-WRT kern.err kernel: [ 0.104648] msm_bus_fabric_init_driver
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.105752] pps_core: LinuxPPS API ver. 1 registered
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.105766] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.105801] PTP clock support registered
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.107394] clocksource: Switched to clocksource dg_timer
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.111847] NET: Registered protocol family 2
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.112482] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.112523] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.112575] TCP: Hash tables configured (established 4096 bind 4096)
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.112627] UDP hash table entries: 256 (order: 1, 8192 bytes)
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.112651] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.112824] NET: Registered protocol family 1
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 0.112877] PCI: CLS 0 bytes, default 64
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.116977] workingset: timestamp_bits=30 max_order=17 bucket_order=0
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.126763] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.132517] cryptodev: driver 1.9 loaded.
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.132553] io scheduler noop registered
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.132566] io scheduler deadline registered (default)
Dec 31 18:00:13 DD-WRT kern.warn kernel: [ 0.134314] 1b500000.pci supply vdda not found, using dummy regulator
Dec 31 18:00:13 DD-WRT kern.warn kernel: [ 0.134424] 1b500000.pci supply vdda_phy not found, using dummy regulator
Dec 31 18:00:13 DD-WRT kern.warn kernel: [ 0.134509] 1b500000.pci supply vdda_refclk not found, using dummy regulator
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.135319] OF: PCI: host bridge /soc/pci@1b500000 ranges:
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.135365] OF: PCI: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.135391] OF: PCI: MEM 0x08000000..0x0fdfffff -> 0x08000000
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.237766] qcom-pcie 1b500000.pci: link up
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.237959] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.237982] pci_bus 0000:00: root bus resource [bus 00-ff]
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.238000] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.238013] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 0.238066] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 0.238220] pci 0000:00:00.0: supports D1
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 0.238230] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.238530] PCI: bus0: Fast back to back transfers disabled
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 0.238861] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 0.239107] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 0.240267] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.240934] PCI: bus1: Fast back to back transfers disabled
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.241219] pci 0000:00:00.0: BAR 14: assigned [mem 0x08000000-0x081fffff]
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.241246] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.241384] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.241404] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 0.241825] aer 0000:00:00.0:pcie002: service driver aer loaded
Dec 31 18:00:13 DD-WRT kern.warn kernel: [ 0.242291] 1b700000.pci supply vdda not found, using dummy regulator
Dec 31 18:00:13 DD-WRT kern.warn kernel: [ 0.242396] 1b700000.pci supply vdda_phy not found, using dummy regulator
Dec 31 18:00:13 DD-WRT kern.warn kernel: [ 0.242480] 1b700000.pci supply vdda_refclk not found, using dummy regulator
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.243281] OF: PCI: host bridge /soc/pci@1b700000 ranges:
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.243321] OF: PCI: IO 0x31e00000..0x31efffff -> 0x31e00000
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.243342] OF: PCI: MEM 0x2e000000..0x31dfffff -> 0x2e000000
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.347758] qcom-pcie 1b700000.pci: link up
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.347940] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.347959] pci_bus 0001:00: root bus resource [bus 00-ff]
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.347974] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 0.348020] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 0.348147] pci 0001:00:00.0: supports D1
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 0.348157] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.348433] PCI: bus0: Fast back to back transfers disabled
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 0.348736] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 0.348961] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 0.350034] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.350661] PCI: bus1: Fast back to back transfers disabled
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.351048] pci 0001:00:00.0: BAR 14: assigned [mem 0x2e000000-0x2e1fffff]
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.351071] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.351193] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.351212] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 0.351587] aer 0001:00:00.0:pcie002: service driver aer loaded
Dec 31 18:00:13 DD-WRT kern.warn kernel: [ 0.352428] deviceless supply s1b not found, using dummy regulator
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.354051] L2 @ QSB rate. Forcing new rate.
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.354220] L2 @ 800000 KHz
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.354333] CPU0 @ 800000 KHz
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.354342] CPU1 @ QSB rate. Forcing new rate.
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.354468] CPU1 @ 800000 KHz
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.356611] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.358375] serial8250_init
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.358388] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.359398] msm_serial 16340000.serial: msm_serial: detected port #0
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.359474] msm_serial 16340000.serial: uartclk = 7372800
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.359531] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 168, base_baud = 460800) is a MSM
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 0.359566] msm_serial: console setup on port #0
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 1.040720] console [ttyMSM0] enabled
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 1.045436] msm_serial: driver initialized
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 1.050732] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 1.052806] nand: AMD/Spansion S34MS01G2
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 1.059388] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 1.063710] 19 ofpart partitions found on MTD device qcom_nand.0
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 1.070700] Creating 19 MTD partitions on "qcom_nand.0":
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 1.076767] 0x000000000000-0x000000040000 : "SBL1"
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 1.083432] 0x000000040000-0x000000180000 : "MIBIB"
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 1.089274] 0x000000180000-0x0000002c0000 : "SBL2"
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 1.093954] 0x0000002c0000-0x000000540000 : "SBL3"
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 1.096902] random: fast init done
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 1.104757] 0x000000540000-0x000000660000 : "DDRCONFIG"
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 1.107130] 0x000000660000-0x000000780000 : "SSD"
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 1.112022] 0x000000780000-0x000000a00000 : "TZ"
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 1.118812] 0x000000a00000-0x000000c80000 : "RPM"
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 1.123429] 0x000000c80000-0x000000dc0000 : "art"
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 1.126264] 0x000000dc0000-0x000000ec0000 : "APPSBL"
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 1.130694] 0x000000ec0000-0x000000f00000 : "u_env"
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 1.134644] 0x000000f00000-0x000000f40000 : "s_env"
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 1.139274] 0x000000f40000-0x000000f80000 : "devinfo"
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 1.144016] 0x000000f80000-0x000003780000 : "linux"
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 1.203326] 0x000001280000-0x000003780000 : "rootfs"
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 1.254558] mtd: partition "rootfs" set to be root filesystem
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 1.254590] 0x000003780000-0x000005f40000 : "linux2"
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 1.314723] 0x000003a80000-0x000005f40000 : "rootfs2"
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 1.366296] 0x000005f40000-0x000005f80000 : "nvram"
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 1.367527] 0x000005f80000-0x000008000000 : "ddwrt"
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 1.392125] random: crng init done
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 1.416365] libphy: GPIO Bitbanged MDIO: probed
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 1.419765] libphy: Fixed MDIO Bus: probed
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 1.441464] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.219285] stmmac - user ID: 0x10, Synopsys ID: 0x37
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.219313] Ring mode enabled
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.223310] DMA HW capability register supported
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.226263] Enhanced/Alternate descriptors
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.231907] Enabled extended descriptors
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.234864] RX Checksum Offload Engine supported
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.239102] COE Type 2
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.243714] TX Checksum insertion supported
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.245974] Wake-Up On Lan supported
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.250570] eth%d: device MAC address 00:06:3b:01:41:00
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.254052] Enable RX Mitigation via HW Watchdog Timer
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.260448] stmmac - user ID: 0x10, Synopsys ID: 0x37
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.264293] Ring mode enabled
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.269563] DMA HW capability register supported
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.272451] Enhanced/Alternate descriptors
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.278148] Enabled extended descriptors
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.281051] RX Checksum Offload Engine supported
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.285219] COE Type 2
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.289957] TX Checksum insertion supported
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.292164] Wake-Up On Lan supported
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.296678] eth%d: device MAC address 00:03:7f:ba:db:02
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.300303] Enable RX Mitigation via HW Watchdog Timer
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.306088] i2c /dev entries driver
Dec 31 18:00:13 DD-WRT kern.err kernel: [ 2.311149] Calibration not found.
Dec 31 18:00:13 DD-WRT kern.err kernel: [ 2.315041] CPUidle arm: CPU 0 failed to init idle CPU ops
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.317970] GACT probability NOT on
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.322907] Mirror/redirect action on
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.326304] Simple TC action Loaded
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.330745] netem: version 1.3
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.333422] u32 classifier
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.336520] Performance counters on
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.339284] input device check on
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.342943] Actions configured
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.346768] Netfilter messages via NETLINK v0.30.
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.350387] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
Dec 31 18:00:13 DD-WRT kern.warn kernel: [ 2.355481] nf_conntrack_rtsp v0.7 loading
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.361207] xt_time: kernel timezone is -0000
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.364834] ip_set: protocol 6
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.369508] gre: GRE over IPv4 demultiplexor driver
Dec 31 18:00:13 DD-WRT kern.warn kernel: [ 2.372578] nf_nat_rtsp v0.7 loading
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.376996] ip_tables: (C) 2000-2006 Netfilter Core Team
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.381054] NET: Registered protocol family 17
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 2.386155] Bridge firewalling registered
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.390452] 8021q: 802.1Q VLAN Support v1.8
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 2.394567] Registering SWP/SWPB emulation handler
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.408067] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.426767] s1a: Bringing 0uV into 1050000-1050000uV
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.427037] s1b: Bringing 0uV into 1050000-1050000uV
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.431087] s2a: Bringing 0uV into 800000-800000uV
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.435981] s2b: Bringing 0uV into 800000-800000uV
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.444328] trying to register driver cpufreq-dt
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.446686] searching for nvram
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.450007] nvram size = 262144
Dec 31 18:00:13 DD-WRT kern.err kernel: [ 2.492727] no valid UBI magic found inside mtd13
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.492782] hctosys: unable to open rtc device (rtc0)
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.502211] VFS: Mounted root (squashfs filesystem) readonly on device 31:16.
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 2.503760] Freeing unused kernel memory: 1024K
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 5.590060] Loading modules backported from Linux version wireless-drivers-next-for-davem-2017-09-01-0-geb464d4a8d09
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 5.590091] Backport generated by backports.git backports-20160324-111-g97b8d7c4
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 6.093069] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 6.093716] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Dec 31 18:00:13 DD-WRT kern.warn kernel: [ 6.298177] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
Dec 31 18:00:13 DD-WRT kern.warn kernel: [ 6.298209] ath10k_pci 0000:01:00.0: Falling back to user helper
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 6.655817] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 6.655855] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 6.667396] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.5.3-00050 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 5ae23169
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 6.737137] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:2 crc32 792a3d38
Dec 31 18:00:13 DD-WRT kern.warn kernel: [ 7.962430] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 528 tid: 102
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 8.036545] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 8.119318] ath: EEPROM regdomain: 0x0
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 8.119324] ath: EEPROM indicates default country code should be used
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 8.119327] ath: doing EEPROM country->regdmn map search
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 8.119336] ath: country maps to regdmn code: 0x3a
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 8.119341] ath: Country alpha2 being used: US
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 8.119346] ath: Regpair used: 0x3a
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 8.123301] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 8.123886] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Dec 31 18:00:13 DD-WRT kern.warn kernel: [ 8.288997] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
Dec 31 18:00:13 DD-WRT kern.warn kernel: [ 8.289036] ath10k_pci 0001:01:00.0: Falling back to user helper
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 8.299900] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 8.304755] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 8.317525] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.5.3-00050 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 5ae23169
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 8.451608] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:1 crc32 792a3d38
Dec 31 18:00:13 DD-WRT kern.warn kernel: [ 9.672057] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 528 tid: 102
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 9.743839] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 9.839024] ath: EEPROM regdomain: 0x0
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 9.839029] ath: EEPROM indicates default country code should be used
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 9.839032] ath: doing EEPROM country->regdmn map search
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 9.839039] ath: country maps to regdmn code: 0x3a
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 9.839043] ath: Country alpha2 being used: US
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 9.839047] ath: Regpair used: 0x3a
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 10.959173] dwmac1000: Master AXI performs any burst length
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 10.959240] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 10.963839] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 11.090926] dwmac1000: Master AXI performs any burst length
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 11.090966] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 11.095423] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
Dec 31 18:00:13 DD-WRT kern.warn kernel: [ 11.492348] lzma_compress: module license 'unspecified' taints kernel.
Dec 31 18:00:13 DD-WRT kern.warn kernel: [ 11.496107] Disabling lock debugging due to kernel taint
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 11.567625] jffs2: version 2.2. (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc.
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 11.587428] ubi0: default fastmap pool size: 10
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 11.587450] ubi0: default fastmap WL pool size: 5
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 11.590837] ubi0: attaching mtd18
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 11.875125] ubi0: scanning is finished
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 11.886489] ubi0: attached mtd18 (name "ddwrt", size 32 MiB)
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 11.886512] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 11.891270] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 11.897945] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 11.904748] ubi0: good PEBs: 260, bad PEBs: 0, corrupted PEBs: 0
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 11.911565] ubi0: user volume: 0, internal volumes: 1, max. volumes count: 128
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 11.917814] ubi0: max/mean erase counter: 1/1, WL threshold: 4096, image sequence number: 4280260282
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 11.924804] ubi0: available PEBs: 234, total reserved PEBs: 26, PEBs reserved for bad PEB handling: 20
Dec 31 18:00:13 DD-WRT kern.notice kernel: [ 11.934164] ubi0: background thread "ubi_bgt0d" started, PID 914
Dec 31 18:00:13 DD-WRT kern.err kernel: [ 11.944154] UBIFS error (pid: 896): cannot open "ubi1:ddwrt", error -19
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 11.997808] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
Dec 31 18:00:13 DD-WRT user.info : bridge : interface wlan0 successfully deleted from bridge br0
Dec 31 18:00:13 DD-WRT user.info : bridge : interface wlan1 successfully deleted from bridge br0
Dec 31 18:00:13 DD-WRT user.info : bridge : bridge br0 successfully added
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 13.421799] device br0 entered promiscuous mode
Dec 31 18:00:13 DD-WRT daemon.info mstpd[739]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
Dec 31 18:00:13 DD-WRT daemon.info mstpd[739]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
Dec 31 18:00:13 DD-WRT user.info : bridge : interface vlan1 successfully added to bridge br0
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 13.504647] br0: port 1(vlan1) entered blocking state
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 13.504671] br0: port 1(vlan1) entered disabled state
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 13.508979] device vlan1 entered promiscuous mode
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 13.513702] device eth0 entered promiscuous mode
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 13.525368] br0: port 1(vlan1) entered blocking state
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 13.525390] br0: port 1(vlan1) entered forwarding state
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 13.530319] device br0 left promiscuous mode
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 13.538145] device br0 entered promiscuous mode
Dec 31 18:00:13 DD-WRT kern.info kernel: [ 13.544926] device br0 left promiscuous mode
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 13.596546] ath: EEPROM regdomain: 0x8348
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 13.596551] ath: EEPROM indicates we should expect a country code
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 13.596556] ath: doing EEPROM country->regdmn map search
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 13.596561] ath: country maps to regdmn code: 0x3a
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 13.596565] ath: Country alpha2 being used: US
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 13.596570] ath: Regpair used: 0x3a
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 13.596576] ath: regdomain 0x8348 dynamically updated by user
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 13.596591] ath: EEPROM regdomain: 0x8348
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 13.596594] ath: EEPROM indicates we should expect a country code
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 13.596598] ath: doing EEPROM country->regdmn map search
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 13.596601] ath: country maps to regdmn code: 0x3a
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 13.596604] ath: Country alpha2 being used: US
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 13.596607] ath: Regpair used: 0x3a
Dec 31 18:00:13 DD-WRT kern.debug kernel: [ 13.596611] ath: regdomain 0x8348 dynamically updated by user
Dec 31 18:00:17 DD-WRT kern.info kernel: [ 17.651570] Core CLK 300
Dec 31 18:00:17 DD-WRT kern.info kernel: [ 17.651590] Mac CLK 150
Dec 31 18:00:19 DD-WRT kern.warn kernel: [ 19.033497] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 528 tid: 102
Dec 31 18:00:24 DD-WRT kern.warn kernel: [ 24.460864] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 528 tid: 102
Dec 31 18:00:24 DD-WRT kern.info kernel: [ 24.629268] br0: port 2(ath0) entered blocking state
Dec 31 18:00:24 DD-WRT kern.info kernel: [ 24.629288] br0: port 2(ath0) entered disabled state
Dec 31 18:00:24 DD-WRT kern.info kernel: [ 24.633481] device ath0 entered promiscuous mode
Dec 31 18:00:25 DD-WRT kern.info kernel: [ 25.115309] br0: port 2(ath0) entered blocking state
Dec 31 18:00:25 DD-WRT kern.info kernel: [ 25.115339] br0: port 2(ath0) entered forwarding state
Dec 31 18:00:25 DD-WRT user.info : bridge : interface ath0 successfully added to bridge br0
Dec 31 18:00:25 DD-WRT kern.info kernel: [ 25.168238] Core CLK 300
Dec 31 18:00:25 DD-WRT kern.info kernel: [ 25.168257] Mac CLK 150
Dec 31 18:00:26 DD-WRT kern.warn kernel: [ 26.486725] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 528 tid: 102
Dec 31 18:00:35 DD-WRT kern.warn kernel: [ 35.939523] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 528 tid: 102
Dec 31 18:00:36 DD-WRT kern.info kernel: [ 36.101498] br0: port 3(ath1) entered blocking state
Dec 31 18:00:36 DD-WRT kern.info kernel: [ 36.101519] br0: port 3(ath1) entered disabled state
Dec 31 18:00:36 DD-WRT kern.info kernel: [ 36.105734] device ath1 entered promiscuous mode
Dec 31 18:00:36 DD-WRT kern.info kernel: [ 36.519968] br0: port 3(ath1) entered blocking state
Dec 31 18:00:36 DD-WRT kern.info kernel: [ 36.519990] br0: port 3(ath1) entered forwarding state
Dec 31 18:00:36 DD-WRT user.info : bridge : interface ath1 successfully added to bridge br0
Dec 31 18:00:36 DD-WRT user.info : klogd : kernel log daemon successfully stopped
Dec 31 18:00:36 DD-WRT user.info : telnetd : daemon successfully started
Dec 31 18:00:36 DD-WRT user.info : wland : daemon successfully started
Dec 31 18:00:36 DD-WRT user.info : hwmon : successfully started
Dec 31 18:00:36 DD-WRT kern.notice kernel: klogd: exiting
Dec 31 18:00:36 DD-WRT user.info : syslogd : syslog daemon successfully stopped
Dec 31 18:00:36 DD-WRT syslog.info syslogd exiting
Dec 31 18:00:36 DD-WRT syslog.info syslogd started: BusyBox v1.31.0
Dec 31 18:00:36 DD-WRT kern.notice kernel: klogd started: BusyBox v1.31.0 (2019-10-12 05:30:46 CEST)
Dec 31 18:00:36 DD-WRT kern.info kernel: [ 36.768394] device vlan2 entered promiscuous mode
Dec 31 18:00:36 DD-WRT user.info : sfe : shortcut forwarding engine successfully started
Dec 31 18:00:36 DD-WRT kern.alert kernel: [ 36.838998] fast-classifier (PBR safe v2.1.6b): starting up
Dec 31 18:00:36 DD-WRT kern.alert kernel: [ 36.839080] fast-classifier: registered
Dec 31 18:00:36 DD-WRT daemon.info dnsmasq[1150]: started, version 2.80 cachesize 1500
Dec 31 18:00:36 DD-WRT daemon.info dnsmasq[1150]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP no-conntrack no-ipset no-auth DNSSEC loop-detect no-inotify no-dumpfile
Dec 31 18:00:36 DD-WRT daemon.info dnsmasq-dhcp[1150]: DHCP, IP range 192.168.1.100 -- 192.168.1.149, lease time 1d
Dec 31 18:00:36 DD-WRT daemon.info dnsmasq[1150]: using local addresses only for domain test
Dec 31 18:00:36 DD-WRT user.info : dnsmasq : daemon successfully started
Dec 31 18:00:36 DD-WRT daemon.info dnsmasq[1150]: using local addresses only for domain onion
Dec 31 18:00:36 DD-WRT daemon.info dnsmasq[1150]: using local addresses only for domain localhost
Dec 31 18:00:36 DD-WRT daemon.info dnsmasq[1150]: using local addresses only for domain local
Dec 31 18:00:36 DD-WRT daemon.info dnsmasq[1150]: using local addresses only for domain invalid
Dec 31 18:00:36 DD-WRT daemon.info dnsmasq[1150]: using local addresses only for domain bind
Dec 31 18:00:36 DD-WRT daemon.warn dnsmasq[1150]: no servers found in /tmp/resolv.dnsmasq, will retry
Dec 31 18:00:36 DD-WRT daemon.info dnsmasq[1150]: read /etc/hosts - 2 addresses
Dec 31 18:00:37 DD-WRT user.info : vpn modules : vpn modules successfully unloaded
Dec 31 18:00:37 DD-WRT user.info : vpn modules : nf_conntrack_proto_gre successfully loaded
Dec 31 18:00:37 DD-WRT user.info : vpn modules : nf_nat_proto_gre successfully loaded
Dec 31 18:00:37 DD-WRT user.info : vpn modules : nf_conntrack_pptp successfully loaded
Dec 31 18:00:37 DD-WRT user.info : vpn modules : nf_nat_pptp successfully loaded
Dec 31 18:00:37 DD-WRT kern.info kernel: [ 37.504758] device vlan2 left promiscuous mode
Dec 31 18:00:37 DD-WRT user.info : ttraff : traffic counter daemon successfully started
Dec 31 18:00:37 DD-WRT daemon.info httpd[1230]: httpd : httpd server started at port 80
Dec 31 18:00:37 DD-WRT user.info : httpd : http daemon successfully started
Dec 31 18:00:37 DD-WRT user.info : resetbutton : daemon successfully stopped
Dec 31 18:00:37 DD-WRT user.info : resetbutton : resetbutton daemon successfully started
Dec 31 18:00:37 DD-WRT user.info : dnsmasq : daemon successfully stopped
Dec 31 18:00:37 DD-WRT daemon.info dnsmasq[1150]: exiting on receipt of SIGTERM
Dec 31 18:00:37 DD-WRT daemon.info dnsmasq[1289]: started, version 2.80 cachesize 1500
Dec 31 18:00:37 DD-WRT daemon.info dnsmasq[1289]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP no-conntrack no-ipset no-auth DNSSEC loop-detect no-inotify no-dumpfile
Dec 31 18:00:37 DD-WRT daemon.info dnsmasq-dhcp[1289]: DHCP, IP range 192.168.1.100 -- 192.168.1.149, lease time 1d
Dec 31 18:00:37 DD-WRT user.info : dnsmasq : daemon successfully started
Dec 31 18:00:37 DD-WRT daemon.info dnsmasq[1289]: using local addresses only for domain test
Dec 31 18:00:37 DD-WRT daemon.info dnsmasq[1289]: using local addresses only for domain onion
Dec 31 18:00:37 DD-WRT daemon.info dnsmasq[1289]: using local addresses only for domain localhost
Dec 31 18:00:37 DD-WRT daemon.info dnsmasq[1289]: using local addresses only for domain local
Dec 31 18:00:37 DD-WRT daemon.info dnsmasq[1289]: using local addresses only for domain invalid
Dec 31 18:00:37 DD-WRT daemon.info dnsmasq[1289]: using local addresses only for domain bind
Dec 31 18:00:37 DD-WRT daemon.info dnsmasq[1289]: reading /tmp/resolv.dnsmasq
Dec 31 18:00:37 DD-WRT daemon.info dnsmasq[1289]: using local addresses only for domain test
Dec 31 18:00:37 DD-WRT daemon.info dnsmasq[1289]: using local addresses only for domain onion
Dec 31 18:00:37 DD-WRT daemon.info dnsmasq[1289]: using local addresses only for domain localhost
Dec 31 18:00:37 DD-WRT daemon.info dnsmasq[1289]: using local addresses only for domain local
Dec 31 18:00:37 DD-WRT daemon.info dnsmasq[1289]: using local addresses only for domain invalid
Dec 31 18:00:37 DD-WRT daemon.info dnsmasq[1289]: using local addresses only for domain bind
Dec 31 18:00:37 DD-WRT daemon.info dnsmasq[1289]: using nameserver 10.72.28.13#53
Dec 31 18:00:37 DD-WRT daemon.info dnsmasq[1289]: read /etc/hosts - 2 addresses
Dec 31 18:00:37 DD-WRT user.info : wland : daemon successfully stopped
Dec 31 18:00:37 DD-WRT user.info : wland : daemon successfully started
Dec 31 18:00:37 DD-WRT user.info : wan : WAN is up. IP: 10.72.28.52
Dec 31 18:00:37 DD-WRT kern.info kernel: [ 37.912799] jffs2: version 2.2. (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc.
Dec 31 18:00:37 DD-WRT user.info : process_monitor : successfully started
Dec 31 18:00:37 DD-WRT kern.notice kernel: [ 37.997060] ubi0: detaching mtd18
Dec 31 18:00:37 DD-WRT kern.notice kernel: [ 37.997994] ubi0: mtd18 is detached
Dec 31 18:00:38 DD-WRT daemon.debug ntpclient[1308]: Connecting to 2.pool.ntp.org [94.154.96.7] ...
Oct 13 09:59:52 DD-WRT daemon.info ntpclient[1308]: Time set from 2.pool.ntp.org [94.154.96.7].
Oct 13 09:59:52 DD-WRT daemon.info process_monitor[1303]: cyclic NTP Update success (servers 2.pool.ntp.org 212.18.3.19 88.99.174.22)
Oct 13 09:59:52 DD-WRT daemon.info dnsmasq-dhcp[1289]: DHCPDISCOVER(br0) 192.168.1.138 20:cf:30:cb:84:df
Oct 13 09:59:52 DD-WRT daemon.info dnsmasq-dhcp[1289]: DHCPOFFER(br0) 192.168.1.137 20:cf:30:cb:84:df
Oct 13 09:59:52 DD-WRT daemon.info dnsmasq-dhcp[1289]: DHCPREQUEST(br0) 192.168.1.137 20:cf:30:cb:84:df
Oct 13 09:59:52 DD-WRT daemon.info dnsmasq-dhcp[1289]: DHCPACK(br0) 192.168.1.137 20:cf:30:cb:84:df Deb
Oct 13 09:59:52 DD-WRT kern.notice kernel: [ 38.492061] ubi0: default fastmap pool size: 10
Oct 13 09:59:52 DD-WRT kern.notice kernel: [ 38.492082] ubi0: default fastmap WL pool size: 5
Oct 13 09:59:52 DD-WRT kern.notice kernel: [ 38.495464] ubi0: attaching mtd18
Oct 13 09:59:52 DD-WRT daemon.debug process_monitor[1303]: Restarting cron (time sync change)
Oct 13 09:59:52 DD-WRT user.info : httpd : daemon successfully stopped
Oct 13 09:59:52 DD-WRT user.info : cron : daemon successfully stopped
Oct 13 09:59:52 DD-WRT daemon.info httpd[1237]: httpd : httpd server shutdown
Oct 13 09:59:53 DD-WRT user.info : process_monitor : daemon successfully stopped
Oct 13 09:59:53 DD-WRT daemon.info httpd[1444]: httpd : httpd server started at port 80
Oct 13 09:59:53 DD-WRT user.info : httpd : http daemon successfully started
Oct 13 09:59:53 DD-WRT user.info : cron : daemon successfully started
Oct 13 09:59:53 DD-WRT cron.info cron[1454]: (CRON) STARTUP (fork ok)
Oct 13 09:59:53 DD-WRT kern.notice kernel: [ 38.694621] ubi0: scanning is finished
Oct 13 09:59:53 DD-WRT kern.notice kernel: [ 38.694642] ubi0: empty MTD device detected
Oct 13 09:59:53 DD-WRT kern.notice kernel: [ 38.716462] ubi0: attached mtd18 (name "ddwrt", size 32 MiB)
Oct 13 09:59:53 DD-WRT kern.notice kernel: [ 38.716486] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Oct 13 09:59:53 DD-WRT kern.notice kernel: [ 38.721269] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Oct 13 09:59:53 DD-WRT kern.notice kernel: [ 38.727970] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
Oct 13 09:59:53 DD-WRT kern.notice kernel: [ 38.734722] ubi0: good PEBs: 260, bad PEBs: 0, corrupted PEBs: 0
Oct 13 09:59:53 DD-WRT kern.notice kernel: [ 38.741573] ubi0: user volume: 0, internal volumes: 1, max. volumes count: 128
Oct 13 09:59:53 DD-WRT kern.notice kernel: [ 38.741577] ubi0: max/mean erase counter: 0/0, WL threshold: 4096, image sequence number: 1581497926
Oct 13 09:59:53 DD-WRT kern.notice kernel: [ 38.741582] ubi0: available PEBs: 234, total reserved PEBs: 26, PEBs reserved for bad PEB handling: 20
Oct 13 09:59:53 DD-WRT kern.notice kernel: [ 38.741657] ubi0: background thread "ubi_bgt0d" started, PID 1455
Oct 13 09:59:53 DD-WRT user.info : vpn modules : vpn modules successfully unloaded
Oct 13 09:59:53 DD-WRT user.info : vpn modules : nf_conntrack_proto_gre successfully loaded
Oct 13 09:59:53 DD-WRT user.info : vpn modules : nf_nat_proto_gre successfully loaded
Oct 13 09:59:53 DD-WRT user.info : vpn modules : nf_conntrack_pptp successfully loaded
Oct 13 09:59:53 DD-WRT user.info : vpn modules : nf_nat_pptp successfully loaded
Oct 13 09:59:53 DD-WRT user.info : sfe : shortcut forwarding engine successfully started
Oct 13 09:59:53 DD-WRT user.info : process_monitor : successfully started
Oct 13 09:59:53 DD-WRT daemon.debug process_monitor[1556]: We need to re-update after 3600 seconds
Oct 13 09:59:53 DD-WRT daemon.info process_monitor[1556]: process_monitor : set timer: 3600 seconds, callback: ntp_main()
Oct 13 10:00:06 DD-WRT user.debug : ttraff: data collection started
Oct 13 10:03:25 DD-WRT auth.info login[1602]: root login on 'pts/0'
root@DD-WRT:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.196 (root@server2) (gcc version 9.2.0 (OpenWrt GCC 9.2.0 r10880-cb3c4c713d) ) #480 SMP Thu Oct 10 02:29:07 CEST 2019
[ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt:Machine model: Linksys EA8500 WiFi Router
[ 0.000000] OF: fdt:Ignoring memory range 0x41500000 - 0x42000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 122880
[ 0.000000] free_area_init_node: node 0, pgdat c0b2d140, node_mem_map ddc39000
[ 0.000000] Normal zone: 960 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 122880 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 12 pages/cpu s18892 r8192 d22068 u49152
[ 0.000000] pcpu-alloc: s18892 r8192 d22068 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920
[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:16
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 478236K/491520K available (5120K kernel code, 183K rwdata, 1028K rodata, 1024K init, 407K bss, 13284K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xde800000 - 0xff800000 ( 528 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc0800000 (6112 kB)
[ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
[ 0.000000] .data : 0xc0b00000 - 0xc0b2de28 ( 184 kB)
[ 0.000000] .bss : 0xc0b2f000 - 0xc0b94ebc ( 408 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[ 0.000008] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[ 0.000022] Switching to timer-based delay loop, resolution 160ns
[ 0.000193] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[ 0.000216] pid_max: default: 32768 minimum: 301
[ 0.000326] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000341] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000927] CPU: Testing write buffer coherency: ok
[ 0.001236] Setting up static identity map for 0x42300000 - 0x4230003c
[ 0.004511] Brought up 2 CPUs
[ 0.004529] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[ 0.004539] CPU: All CPU(s) started in SVC mode.
[ 0.017485] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[ 0.017683] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.017707] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.017787] pinctrl core: initialized pinctrl subsystem
[ 0.018921] NET: Registered protocol family 16
[ 0.019272] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.051804] cpuidle: using governor ladder
[ 0.104648] msm_bus_fabric_init_driver
[ 0.105752] pps_core: LinuxPPS API ver. 1 registered
[ 0.105766] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.105801] PTP clock support registered
[ 0.107394] clocksource: Switched to clocksource dg_timer
[ 0.111847] NET: Registered protocol family 2
[ 0.112482] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.112523] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.112575] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.112627] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.112651] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.112824] NET: Registered protocol family 1
[ 0.112877] PCI: CLS 0 bytes, default 64
[ 0.116977] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.126763] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.132517] cryptodev: driver 1.9 loaded.
[ 0.132553] io scheduler noop registered
[ 0.132566] io scheduler deadline registered (default)
[ 0.134314] 1b500000.pci supply vdda not found, using dummy regulator
[ 0.134424] 1b500000.pci supply vdda_phy not found, using dummy regulator
[ 0.134509] 1b500000.pci supply vdda_refclk not found, using dummy regulator
[ 0.135319] OF: PCI: host bridge /soc/pci@1b500000 ranges:
[ 0.135365] OF: PCI: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[ 0.135391] OF: PCI: MEM 0x08000000..0x0fdfffff -> 0x08000000
[ 0.237766] qcom-pcie 1b500000.pci: link up
[ 0.237959] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[ 0.237982] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.238000] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
[ 0.238013] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[ 0.238066] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.238220] pci 0000:00:00.0: supports D1
[ 0.238230] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.238530] PCI: bus0: Fast back to back transfers disabled
[ 0.238861] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.239107] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.240267] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.240934] PCI: bus1: Fast back to back transfers disabled
[ 0.241219] pci 0000:00:00.0: BAR 14: assigned [mem 0x08000000-0x081fffff]
[ 0.241246] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[ 0.241384] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.241404] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
[ 0.241825] aer 0000:00:00.0:pcie002: service driver aer loaded
[ 0.242291] 1b700000.pci supply vdda not found, using dummy regulator
[ 0.242396] 1b700000.pci supply vdda_phy not found, using dummy regulator
[ 0.242480] 1b700000.pci supply vdda_refclk not found, using dummy regulator
[ 0.243281] OF: PCI: host bridge /soc/pci@1b700000 ranges:
[ 0.243321] OF: PCI: IO 0x31e00000..0x31efffff -> 0x31e00000
[ 0.243342] OF: PCI: MEM 0x2e000000..0x31dfffff -> 0x2e000000
[ 0.347758] qcom-pcie 1b700000.pci: link up
[ 0.347940] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[ 0.347959] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.347974] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[ 0.348020] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.348147] pci 0001:00:00.0: supports D1
[ 0.348157] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[ 0.348433] PCI: bus0: Fast back to back transfers disabled
[ 0.348736] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.348961] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.350034] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.350661] PCI: bus1: Fast back to back transfers disabled
[ 0.351048] pci 0001:00:00.0: BAR 14: assigned [mem 0x2e000000-0x2e1fffff]
[ 0.351071] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[ 0.351193] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 0.351212] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
[ 0.351587] aer 0001:00:00.0:pcie002: service driver aer loaded
[ 0.352428] deviceless supply s1b not found, using dummy regulator
[ 0.354051] L2 @ QSB rate. Forcing new rate.
[ 0.354220] L2 @ 800000 KHz
[ 0.354333] CPU0 @ 800000 KHz
[ 0.354342] CPU1 @ QSB rate. Forcing new rate.
[ 0.354468] CPU1 @ 800000 KHz
[ 0.356611] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[ 0.358375] serial8250_init
[ 0.358388] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.359398] msm_serial 16340000.serial: msm_serial: detected port #0
[ 0.359474] msm_serial 16340000.serial: uartclk = 7372800
[ 0.359531] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 168, base_baud = 460800) is a MSM
[ 0.359566] msm_serial: console setup on port #0
[ 1.040720] console [ttyMSM0] enabled
[ 1.045436] msm_serial: driver initialized
[ 1.050732] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
[ 1.052806] nand: AMD/Spansion S34MS01G2
[ 1.059388] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.063710] 19 ofpart partitions found on MTD device qcom_nand.0
[ 1.070700] Creating 19 MTD partitions on "qcom_nand.0":
[ 1.076767] 0x000000000000-0x000000040000 : "SBL1"
[ 1.083432] 0x000000040000-0x000000180000 : "MIBIB"
[ 1.089274] 0x000000180000-0x0000002c0000 : "SBL2"
[ 1.093954] 0x0000002c0000-0x000000540000 : "SBL3"
[ 1.096902] random: fast init done
[ 1.104757] 0x000000540000-0x000000660000 : "DDRCONFIG"
[ 1.107130] 0x000000660000-0x000000780000 : "SSD"
[ 1.112022] 0x000000780000-0x000000a00000 : "TZ"
[ 1.118812] 0x000000a00000-0x000000c80000 : "RPM"
[ 1.123429] 0x000000c80000-0x000000dc0000 : "art"
[ 1.126264] 0x000000dc0000-0x000000ec0000 : "APPSBL"
[ 1.130694] 0x000000ec0000-0x000000f00000 : "u_env"
[ 1.134644] 0x000000f00000-0x000000f40000 : "s_env"
[ 1.139274] 0x000000f40000-0x000000f80000 : "devinfo"
[ 1.144016] 0x000000f80000-0x000003780000 : "linux"
[ 1.203326] 0x000001280000-0x000003780000 : "rootfs"
[ 1.254558] mtd: partition "rootfs" set to be root filesystem
[ 1.254590] 0x000003780000-0x000005f40000 : "linux2"
[ 1.314723] 0x000003a80000-0x000005f40000 : "rootfs2"
[ 1.366296] 0x000005f40000-0x000005f80000 : "nvram"
[ 1.367527] 0x000005f80000-0x000008000000 : "ddwrt"
[ 1.392125] random: crng init done
[ 1.416365] libphy: GPIO Bitbanged MDIO: probed
[ 1.419765] libphy: Fixed MDIO Bus: probed
[ 1.441464] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
[ 2.219285] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 2.219313] Ring mode enabled
[ 2.223310] DMA HW capability register supported
[ 2.226263] Enhanced/Alternate descriptors
[ 2.231907] Enabled extended descriptors
[ 2.234864] RX Checksum Offload Engine supported
[ 2.239102] COE Type 2
[ 2.243714] TX Checksum insertion supported
[ 2.245974] Wake-Up On Lan supported
[ 2.250570] eth%d: device MAC address 00:06:3b:01:41:00
[ 2.254052] Enable RX Mitigation via HW Watchdog Timer
[ 2.260448] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 2.264293] Ring mode enabled
[ 2.269563] DMA HW capability register supported
[ 2.272451] Enhanced/Alternate descriptors
[ 2.278148] Enabled extended descriptors
[ 2.281051] RX Checksum Offload Engine supported
[ 2.285219] COE Type 2
[ 2.289957] TX Checksum insertion supported
[ 2.292164] Wake-Up On Lan supported
[ 2.296678] eth%d: device MAC address 00:03:7f:ba:db:02
[ 2.300303] Enable RX Mitigation via HW Watchdog Timer
[ 2.306088] i2c /dev entries driver
[ 2.311149] Calibration not found.
[ 2.315041] CPUidle arm: CPU 0 failed to init idle CPU ops
[ 2.317970] GACT probability NOT on
[ 2.322907] Mirror/redirect action on
[ 2.326304] Simple TC action Loaded
[ 2.330745] netem: version 1.3
[ 2.333422] u32 classifier
[ 2.336520] Performance counters on
[ 2.339284] input device check on
[ 2.342943] Actions configured
[ 2.346768] Netfilter messages via NETLINK v0.30.
[ 2.350387] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 2.355481] nf_conntrack_rtsp v0.7 loading
[ 2.361207] xt_time: kernel timezone is -0000
[ 2.364834] ip_set: protocol 6
[ 2.369508] gre: GRE over IPv4 demultiplexor driver
[ 2.372578] nf_nat_rtsp v0.7 loading
[ 2.376996] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.381054] NET: Registered protocol family 17
[ 2.386155] Bridge firewalling registered
[ 2.390452] 8021q: 802.1Q VLAN Support v1.8
[ 2.394567] Registering SWP/SWPB emulation handler
[ 2.408067] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
[ 2.426767] s1a: Bringing 0uV into 1050000-1050000uV
[ 2.427037] s1b: Bringing 0uV into 1050000-1050000uV
[ 2.431087] s2a: Bringing 0uV into 800000-800000uV
[ 2.435981] s2b: Bringing 0uV into 800000-800000uV
[ 2.444328] trying to register driver cpufreq-dt
[ 2.446686] searching for nvram
[ 2.450007] nvram size = 262144
[ 2.492727] no valid UBI magic found inside mtd13
[ 2.492782] hctosys: unable to open rtc device (rtc0)
[ 2.502211] VFS: Mounted root (squashfs filesystem) readonly on device 31:16.
[ 2.503760] Freeing unused kernel memory: 1024K
[ 5.590060] Loading modules backported from Linux version wireless-drivers-next-for-davem-2017-09-01-0-geb464d4a8d09
[ 5.590091] Backport generated by backports.git backports-20160324-111-g97b8d7c4
[ 6.093069] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 6.093716] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 6.298177] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[ 6.298209] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 6.655817] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
[ 6.655855] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[ 6.667396] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.5.3-00050 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 5ae23169
[ 6.737137] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:2 crc32 792a3d38
[ 7.962430] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 528 tid: 102
[ 8.036545] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[ 8.119318] ath: EEPROM regdomain: 0x0
[ 8.119324] ath: EEPROM indicates default country code should be used
[ 8.119327] ath: doing EEPROM country->regdmn map search
[ 8.119336] ath: country maps to regdmn code: 0x3a
[ 8.119341] ath: Country alpha2 being used: US
[ 8.119346] ath: Regpair used: 0x3a
[ 8.123301] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[ 8.123886] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 8.288997] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[ 8.289036] ath10k_pci 0001:01:00.0: Falling back to user helper
[ 8.299900] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
[ 8.304755] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[ 8.317525] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.5.3-00050 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 5ae23169
[ 8.451608] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:1 crc32 792a3d38
[ 9.672057] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 528 tid: 102
[ 9.743839] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[ 9.839024] ath: EEPROM regdomain: 0x0
[ 9.839029] ath: EEPROM indicates default country code should be used
[ 9.839032] ath: doing EEPROM country->regdmn map search
[ 9.839039] ath: country maps to regdmn code: 0x3a
[ 9.839043] ath: Country alpha2 being used: US
[ 9.839047] ath: Regpair used: 0x3a
[ 10.959173] dwmac1000: Master AXI performs any burst length
[ 10.959240] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 10.963839] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[ 11.090926] dwmac1000: Master AXI performs any burst length
[ 11.090966] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 11.095423] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 11.492348] lzma_compress: module license 'unspecified' taints kernel.
[ 11.496107] Disabling lock debugging due to kernel taint
[ 11.567625] jffs2: version 2.2. (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc.
[ 11.587428] ubi0: default fastmap pool size: 10
[ 11.587450] ubi0: default fastmap WL pool size: 5
[ 11.590837] ubi0: attaching mtd18
[ 11.875125] ubi0: scanning is finished
[ 11.886489] ubi0: attached mtd18 (name "ddwrt", size 32 MiB)
[ 11.886512] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 11.891270] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 11.897945] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 11.904748] ubi0: good PEBs: 260, bad PEBs: 0, corrupted PEBs: 0
[ 11.911565] ubi0: user volume: 0, internal volumes: 1, max. volumes count: 128
[ 11.917814] ubi0: max/mean erase counter: 1/1, WL threshold: 4096, image sequence number: 4280260282
[ 11.924804] ubi0: available PEBs: 234, total reserved PEBs: 26, PEBs reserved for bad PEB handling: 20
[ 11.934164] ubi0: background thread "ubi_bgt0d" started, PID 914
[ 11.944154] UBIFS error (pid: 896): cannot open "ubi1:ddwrt", error -19
[ 11.997808] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 13.421799] device br0 entered promiscuous mode
[ 13.504647] br0: port 1(vlan1) entered blocking state
[ 13.504671] br0: port 1(vlan1) entered disabled state
[ 13.508979] device vlan1 entered promiscuous mode
[ 13.513702] device eth0 entered promiscuous mode
[ 13.525368] br0: port 1(vlan1) entered blocking state
[ 13.525390] br0: port 1(vlan1) entered forwarding state
[ 13.530319] device br0 left promiscuous mode
[ 13.538145] device br0 entered promiscuous mode
[ 13.544926] device br0 left promiscuous mode
[ 13.596546] ath: EEPROM regdomain: 0x8348
[ 13.596551] ath: EEPROM indicates we should expect a country code
[ 13.596556] ath: doing EEPROM country->regdmn map search
[ 13.596561] ath: country maps to regdmn code: 0x3a
[ 13.596565] ath: Country alpha2 being used: US
[ 13.596570] ath: Regpair used: 0x3a
[ 13.596576] ath: regdomain 0x8348 dynamically updated by user
[ 13.596591] ath: EEPROM regdomain: 0x8348
[ 13.596594] ath: EEPROM indicates we should expect a country code
[ 13.596598] ath: doing EEPROM country->regdmn map search
[ 13.596601] ath: country maps to regdmn code: 0x3a
[ 13.596604] ath: Country alpha2 being used: US
[ 13.596607] ath: Regpair used: 0x3a
[ 13.596611] ath: regdomain 0x8348 dynamically updated by user
[ 17.651570] Core CLK 300
[ 17.651590] Mac CLK 150
[ 19.033497] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 528 tid: 102
[ 24.460864] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 528 tid: 102
[ 24.629268] br0: port 2(ath0) entered blocking state
[ 24.629288] br0: port 2(ath0) entered disabled state
[ 24.633481] device ath0 entered promiscuous mode
[ 25.115309] br0: port 2(ath0) entered blocking state
[ 25.115339] br0: port 2(ath0) entered forwarding state
[ 25.168238] Core CLK 300
[ 25.168257] Mac CLK 150
[ 26.486725] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 528 tid: 102
[ 35.939523] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 528 tid: 102
[ 36.101498] br0: port 3(ath1) entered blocking state
[ 36.101519] br0: port 3(ath1) entered disabled state
[ 36.105734] device ath1 entered promiscuous mode
[ 36.519968] br0: port 3(ath1) entered blocking state
[ 36.519990] br0: port 3(ath1) entered forwarding state
[ 36.768394] device vlan2 entered promiscuous mode
[ 36.838998] fast-classifier (PBR safe v2.1.6b): starting up
[ 36.839080] fast-classifier: registered
[ 37.504758] device vlan2 left promiscuous mode
[ 37.912799] jffs2: version 2.2. (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc.
[ 37.997060] ubi0: detaching mtd18
[ 37.997994] ubi0: mtd18 is detached
[ 38.492061] ubi0: default fastmap pool size: 10
[ 38.492082] ubi0: default fastmap WL pool size: 5
[ 38.495464] ubi0: attaching mtd18
[ 38.694621] ubi0: scanning is finished
[ 38.694642] ubi0: empty MTD device detected
[ 38.716462] ubi0: attached mtd18 (name "ddwrt", size 32 MiB)
[ 38.716486] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 38.721269] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 38.727970] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 38.734722] ubi0: good PEBs: 260, bad PEBs: 0, corrupted PEBs: 0
[ 38.741573] ubi0: user volume: 0, internal volumes: 1, max. volumes count: 128
[ 38.741577] ubi0: max/mean erase counter: 0/0, WL threshold: 4096, image sequence number: 1581497926
[ 38.741582] ubi0: available PEBs: 234, total reserved PEBs: 26, PEBs reserved for bad PEB handling: 20
[ 38.741657] ubi0: background thread "ubi_bgt0d" started, PID 1455
root@DD-WRT:~# ps
PID USER VSZ STAT COMMAND
1 root 1032 S /sbin/init
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
4 root 0 SW [kworker/0:0]
5 root 0 SW< [kworker/0:0H]
6 root 0 SW [kworker/u4:0]
7 root 0 SW [rcu_sched]
8 root 0 SW [rcu_bh]
9 root 0 SW [migration/0]
10 root 0 SW< [lru-add-drain]
11 root 0 SW [cpuhp/0]
12 root 0 SW [cpuhp/1]
13 root 0 SW [migration/1]
14 root 0 SW [ksoftirqd/1]
15 root 0 SW [kworker/1:0]
16 root 0 SW< [kworker/1:0H]
17 root 0 SW [oom_reaper]
18 root 0 SW< [writeback]
19 root 0 SW [kcompactd0]
20 root 0 SW< [crypto]
21 root 0 SW< [bioset]
22 root 0 SW< [kblockd]
23 root 0 SW< [watchdogd]
25 root 0 SW [kworker/0:1]
42 root 0 SW [kswapd0]
43 root 0 SW< [vmstat]
69 root 0 SW< [cryptodev_queue]
70 root 0 SW [kworker/u4:1]
72 root 0 SW< [bioset]
73 root 0 SW< [bioset]
74 root 0 SW< [bioset]
75 root 0 SW< [bioset]
76 root 0 SW< [bioset]
77 root 0 SW< [bioset]
78 root 0 SW< [bioset]
79 root 0 SW [kworker/1:1]
80 root 0 SW< [bioset]
81 root 0 SW< [bioset]
82 root 0 SW< [bioset]
83 root 0 SW< [bioset]
84 root 0 SW< [bioset]
85 root 0 SW< [bioset]
86 root 0 SW< [bioset]
87 root 0 SW< [bioset]
88 root 0 SW< [bioset]
89 root 0 SW< [bioset]
90 root 0 SW< [bioset]
91 root 0 SW< [bioset]
96 root 0 SW< [kworker/0:1H]
97 root 0 SW< [kworker/1:1H]
734 root 728 S /sbin/hotplug2 --set-rules-file /etc/hotplug2.rules --persistent
739 root 776 S /sbin/mstpd
746 root 1756 S watchdog
773 root 0 SW< [cfg80211]
781 root 0 SW< [ath10k_wq]
782 root 0 SW< [ath10k_aux_wq]
783 root 0 SW [kworker/u4:2]
785 root 0 SW< [ath10k_wq]
786 root 0 SW< [ath10k_aux_wq]
800 root 0 SW [kworker/0:2]
1017 root 0 SW [kworker/1:2]
1020 root 4124 S hostapd -B -P /var/run/ath0_hostapd.pid /tmp/ath0_hostap.conf
1047 root 4104 S hostapd -B -P /var/run/ath1_hostapd.pid /tmp/ath1_hostap.conf
1116 root 1320 R telnetd
1120 root 1312 S syslogd -Z -L
1124 root 1312 S klogd
1226 root 1756 S ttraff
1239 root 1428 S resetbutton
1289 root 1736 S dnsmasq -u root -g root --conf-file=/tmp/dnsmasq.conf
1299 root 1716 S wland
1449 root 4784 S httpd -n -p 80
1454 root 704 S cron
1455 root 0 SW [ubi_bgt0d]
1555 root 1312 S udhcpc -i vlan2 -p /var/run/udhcpc.pid -s /tmp/udhcpc -O routes -O msstaticroutes -O staticroutes
1556 root 1756 S process_monitor
1602 root 1312 S -sh
1615 root 1312 R ps
root@DD-WRT:~# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 21248 21248 0 100% /
none 512 0 512 0% /dev
root@DD-WRT:~# cat /proc/partitions
major minor #blocks name
31 0 256 mtdblock0
31 1 1280 mtdblock1
31 2 1280 mtdblock2
31 3 2560 mtdblock3
31 4 1152 mtdblock4
31 5 1152 mtdblock5
31 6 2560 mtdblock6
31 7 2560 mtdblock7
31 8 1280 mtdblock8
31 9 1024 mtdblock9
31 10 256 mtdblock10
31 11 256 mtdblock11
31 12 256 mtdblock12
31 13 40960 mtdblock13
31 14 37888 mtdblock14
31 15 40704 mtdblock15
31 16 37632 mtdblock16
31 17 256 mtdblock17
31 18 33280 mtdblock18
root@DD-WRT:~# cat /proc/mtd
dev: size erasesize name
mtd0: 00040000 00020000 "SBL1"
mtd1: 00140000 00020000 "MIBIB"
mtd2: 00140000 00020000 "SBL2"
mtd3: 00280000 00020000 "SBL3"
mtd4: 00120000 00020000 "DDRCONFIG"
mtd5: 00120000 00020000 "SSD"
mtd6: 00280000 00020000 "TZ"
mtd7: 00280000 00020000 "RPM"
mtd8: 00140000 00020000 "art"
mtd9: 00100000 00020000 "APPSBL"
mtd10: 00040000 00020000 "u_env"
mtd11: 00040000 00020000 "s_env"
mtd12: 00040000 00020000 "devinfo"
mtd13: 02800000 00020000 "linux"
mtd14: 02500000 00020000 "rootfs"
mtd15: 027c0000 00020000 "linux2"
mtd16: 024c0000 00020000 "rootfs2"
mtd17: 00040000 00020000 "nvram"
mtd18: 02080000 00020000 "ddwrt"
root@DD-WRT:~# exit
Connection closed by foreign host.
mrjcd@Deb:~$