mrjcd@Will-Be-Was:~$ ssh root@ea8500.mrjcd.com
DD-WRT v3.0-r41269 std (c) 2019 NewMedia-NET GmbH
Release: 10/10/19
Board: Linksys EA8500
==========================================================
___ ___ _ _____ ______ ____ ___
/ _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \
/ // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // /
/____/____/ |__/|__/_/|_| /_/ |___/____(_)___/
DD-WRT v3.0
http://www.dd-wrt.com
==========================================================
BusyBox v1.31.0 (2019-10-10 02:37:03 CEST) built-in shell (ash)
root@EA8500:~# cd /jffs/etc/
-sh: cd: can't cd to /jffs/etc/: No such file or directory
root@EA8500:~# cd /jffs/
root@EA8500:/jffs# ls
root@EA8500:/jffs# cd
root@EA8500:~# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 20992 20992 0 100% /
none 512 0 512 0% /dev
/dev/sda 15416264 8075476 6537972 55% /tmp/mnt/sda
root@EA8500:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.196 (root@server2) (gcc version 9.2.0 (OpenWrt GCC 9.2.0 r10880-cb3c4c713d) ) #480 SMP Thu Oct 10 02:29:07 CEST 2019
[ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt:Machine model: Linksys EA8500 WiFi Router
[ 0.000000] OF: fdt:Ignoring memory range 0x41500000 - 0x42000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 122880
[ 0.000000] free_area_init_node: node 0, pgdat c0b2d140, node_mem_map ddc39000
[ 0.000000] Normal zone: 960 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 122880 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 12 pages/cpu s18892 r8192 d22068 u49152
[ 0.000000] pcpu-alloc: s18892 r8192 d22068 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920
[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:16
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 478236K/491520K available (5120K kernel code, 183K rwdata, 1028K rodata, 1024K init, 407K bss, 13284K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xde800000 - 0xff800000 ( 528 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc0800000 (6112 kB)
[ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
[ 0.000000] .data : 0xc0b00000 - 0xc0b2de28 ( 184 kB)
[ 0.000000] .bss : 0xc0b2f000 - 0xc0b94ebc ( 408 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[ 0.000010] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[ 0.000023] Switching to timer-based delay loop, resolution 160ns
[ 0.000195] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[ 0.000218] pid_max: default: 32768 minimum: 301
[ 0.000325] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000339] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000926] CPU: Testing write buffer coherency: ok
[ 0.001235] Setting up static identity map for 0x42300000 - 0x4230003c
[ 0.004513] Brought up 2 CPUs
[ 0.004532] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[ 0.004542] CPU: All CPU(s) started in SVC mode.
[ 0.017496] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[ 0.017693] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.017717] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.017797] pinctrl core: initialized pinctrl subsystem
[ 0.018932] NET: Registered protocol family 16
[ 0.019283] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.051772] cpuidle: using governor ladder
[ 0.104588] msm_bus_fabric_init_driver
[ 0.105700] pps_core: LinuxPPS API ver. 1 registered
[ 0.105713] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.105748] PTP clock support registered
[ 0.107326] clocksource: Switched to clocksource dg_timer
[ 0.111779] NET: Registered protocol family 2
[ 0.112415] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.112456] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.112509] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.112559] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.112584] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.112756] NET: Registered protocol family 1
[ 0.112811] PCI: CLS 0 bytes, default 64
[ 0.116908] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.126688] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.132423] cryptodev: driver 1.9 loaded.
[ 0.132459] io scheduler noop registered
[ 0.132472] io scheduler deadline registered (default)
[ 0.134213] 1b500000.pci supply vdda not found, using dummy regulator
[ 0.134325] 1b500000.pci supply vdda_phy not found, using dummy regulator
[ 0.134409] 1b500000.pci supply vdda_refclk not found, using dummy regulator
[ 0.135217] OF: PCI: host bridge /soc/pci@1b500000 ranges:
[ 0.135264] OF: PCI: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[ 0.135290] OF: PCI: MEM 0x08000000..0x0fdfffff -> 0x08000000
[ 0.237703] qcom-pcie 1b500000.pci: link up
[ 0.237897] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[ 0.237921] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.237938] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
[ 0.237953] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[ 0.238006] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.238162] pci 0000:00:00.0: supports D1
[ 0.238172] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.238469] PCI: bus0: Fast back to back transfers disabled
[ 0.238798] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.239044] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.240205] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.240874] PCI: bus1: Fast back to back transfers disabled
[ 0.241160] pci 0000:00:00.0: BAR 14: assigned [mem 0x08000000-0x081fffff]
[ 0.241187] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[ 0.241324] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.241345] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
[ 0.241765] aer 0000:00:00.0:pcie002: service driver aer loaded
[ 0.242231] 1b700000.pci supply vdda not found, using dummy regulator
[ 0.242337] 1b700000.pci supply vdda_phy not found, using dummy regulator
[ 0.242420] 1b700000.pci supply vdda_refclk not found, using dummy regulator
[ 0.243221] OF: PCI: host bridge /soc/pci@1b700000 ranges:
[ 0.243260] OF: PCI: IO 0x31e00000..0x31efffff -> 0x31e00000
[ 0.243283] OF: PCI: MEM 0x2e000000..0x31dfffff -> 0x2e000000
[ 0.347695] qcom-pcie 1b700000.pci: link up
[ 0.347876] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[ 0.347895] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.347909] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[ 0.347954] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.348082] pci 0001:00:00.0: supports D1
[ 0.348092] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[ 0.348366] PCI: bus0: Fast back to back transfers disabled
[ 0.348670] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.348895] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.349969] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.350596] PCI: bus1: Fast back to back transfers disabled
[ 0.350977] pci 0001:00:00.0: BAR 14: assigned [mem 0x2e000000-0x2e1fffff]
[ 0.351000] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[ 0.351122] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 0.351141] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
[ 0.351515] aer 0001:00:00.0:pcie002: service driver aer loaded
[ 0.352356] deviceless supply s1b not found, using dummy regulator
[ 0.353975] L2 @ QSB rate. Forcing new rate.
[ 0.354144] L2 @ 800000 KHz
[ 0.354257] CPU0 @ 800000 KHz
[ 0.354267] CPU1 @ QSB rate. Forcing new rate.
[ 0.354388] CPU1 @ 800000 KHz
[ 0.356525] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[ 0.358289] serial8250_init
[ 0.358302] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.359315] msm_serial 16340000.serial: msm_serial: detected port #0
[ 0.359391] msm_serial 16340000.serial: uartclk = 7372800
[ 0.359448] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 168, base_baud = 460800) is a MSM
[ 0.359482] msm_serial: console setup on port #0
[ 1.040658] console [ttyMSM0] enabled
[ 1.045351] msm_serial: driver initialized
[ 1.050644] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
[ 1.052720] nand: AMD/Spansion S34MS01G2
[ 1.059294] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.063632] 19 ofpart partitions found on MTD device qcom_nand.0
[ 1.070606] Creating 19 MTD partitions on "qcom_nand.0":
[ 1.076684] 0x000000000000-0x000000040000 : "SBL1"
[ 1.083337] 0x000000040000-0x000000180000 : "MIBIB"
[ 1.089199] 0x000000180000-0x0000002c0000 : "SBL2"
[ 1.093876] 0x0000002c0000-0x000000540000 : "SBL3"
[ 1.096819] random: fast init done
[ 1.104664] 0x000000540000-0x000000660000 : "DDRCONFIG"
[ 1.107050] 0x000000660000-0x000000780000 : "SSD"
[ 1.111918] 0x000000780000-0x000000a00000 : "TZ"
[ 1.118736] 0x000000a00000-0x000000c80000 : "RPM"
[ 1.123347] 0x000000c80000-0x000000dc0000 : "art"
[ 1.126180] 0x000000dc0000-0x000000ec0000 : "APPSBL"
[ 1.130605] 0x000000ec0000-0x000000f00000 : "u_env"
[ 1.134560] 0x000000f00000-0x000000f40000 : "s_env"
[ 1.139181] 0x000000f40000-0x000000f80000 : "devinfo"
[ 1.143936] 0x000000f80000-0x000003780000 : "linux"
[ 1.203273] 0x000001280000-0x000003780000 : "rootfs"
[ 1.254577] mtd: partition "rootfs" set to be root filesystem
[ 1.254608] 0x000003780000-0x000005f40000 : "linux2"
[ 1.314739] 0x000003a80000-0x000005f40000 : "rootfs2"
[ 1.365820] 0x000005f40000-0x000005f80000 : "nvram"
[ 1.367013] 0x000005f80000-0x000008000000 : "ddwrt"
[ 1.391552] random: crng init done
[ 1.415792] libphy: GPIO Bitbanged MDIO: probed
[ 1.419106] libphy: Fixed MDIO Bus: probed
[ 1.440937] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
[ 2.289835] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 2.289864] Ring mode enabled
[ 2.293860] DMA HW capability register supported
[ 2.296815] Enhanced/Alternate descriptors
[ 2.302455] Enabled extended descriptors
[ 2.305412] RX Checksum Offload Engine supported
[ 2.309640] COE Type 2
[ 2.314263] TX Checksum insertion supported
[ 2.316524] Wake-Up On Lan supported
[ 2.321109] eth%d: device MAC address 00:06:3b:01:41:00
[ 2.324600] Enable RX Mitigation via HW Watchdog Timer
[ 2.330985] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 2.334840] Ring mode enabled
[ 2.340134] DMA HW capability register supported
[ 2.343000] Enhanced/Alternate descriptors
[ 2.348718] Enabled extended descriptors
[ 2.351600] RX Checksum Offload Engine supported
[ 2.355767] COE Type 2
[ 2.360527] TX Checksum insertion supported
[ 2.362710] Wake-Up On Lan supported
[ 2.367227] eth%d: device MAC address 00:03:7f:ba:db:02
[ 2.370836] Enable RX Mitigation via HW Watchdog Timer
[ 2.376631] i2c /dev entries driver
[ 2.381692] Calibration not found.
[ 2.385571] CPUidle arm: CPU 0 failed to init idle CPU ops
[ 2.388530] GACT probability NOT on
[ 2.393448] Mirror/redirect action on
[ 2.396856] Simple TC action Loaded
[ 2.401287] netem: version 1.3
[ 2.403969] u32 classifier
[ 2.407068] Performance counters on
[ 2.409825] input device check on
[ 2.413490] Actions configured
[ 2.417317] Netfilter messages via NETLINK v0.30.
[ 2.420951] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 2.425980] nf_conntrack_rtsp v0.7 loading
[ 2.431757] xt_time: kernel timezone is -0000
[ 2.435377] ip_set: protocol 6
[ 2.440051] gre: GRE over IPv4 demultiplexor driver
[ 2.443089] nf_nat_rtsp v0.7 loading
[ 2.447544] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.451598] NET: Registered protocol family 17
[ 2.456706] Bridge firewalling registered
[ 2.460984] 8021q: 802.1Q VLAN Support v1.8
[ 2.465109] Registering SWP/SWPB emulation handler
[ 2.478622] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
[ 2.497282] s1a: Bringing 0uV into 1050000-1050000uV
[ 2.497576] s1b: Bringing 0uV into 1050000-1050000uV
[ 2.501597] s2a: Bringing 0uV into 800000-800000uV
[ 2.506480] s2b: Bringing 0uV into 800000-800000uV
[ 2.514880] trying to register driver cpufreq-dt
[ 2.517188] searching for nvram
[ 2.520516] nvram size = 262144
[ 2.565488] no valid UBI magic found inside mtd13
[ 2.565540] hctosys: unable to open rtc device (rtc0)
[ 2.575636] VFS: Mounted root (squashfs filesystem) readonly on device 31:16.
[ 2.577225] Freeing unused kernel memory: 1024K
[ 5.374055] Loading modules backported from Linux version wireless-drivers-next-for-davem-2017-09-01-0-geb464d4a8d09
[ 5.374085] Backport generated by backports.git backports-20160324-111-g97b8d7c4
[ 5.893828] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 5.894519] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 6.069123] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[ 6.069158] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 6.429832] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
[ 6.429866] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[ 6.440773] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.5.3-00050 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 5ae23169
[ 6.510111] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:2 crc32 792a3d38
[ 7.735303] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 528 tid: 102
[ 7.809764] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[ 7.889259] ath: EEPROM regdomain: 0x0
[ 7.889265] ath: EEPROM indicates default country code should be used
[ 7.889268] ath: doing EEPROM country->regdmn map search
[ 7.889276] ath: country maps to regdmn code: 0x3a
[ 7.889281] ath: Country alpha2 being used: US
[ 7.889285] ath: Regpair used: 0x3a
[ 7.894908] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[ 7.895578] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 8.058982] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[ 8.059027] ath10k_pci 0001:01:00.0: Falling back to user helper
[ 8.069941] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
[ 8.074747] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[ 8.088540] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.5.3-00050 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 5ae23169
[ 8.151024] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:1 crc32 792a3d38
[ 9.372285] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 528 tid: 102
[ 9.444359] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[ 9.529717] ath: EEPROM regdomain: 0x0
[ 9.529724] ath: EEPROM indicates default country code should be used
[ 9.529728] ath: doing EEPROM country->regdmn map search
[ 9.529738] ath: country maps to regdmn code: 0x3a
[ 9.529746] ath: Country alpha2 being used: US
[ 9.529753] ath: Regpair used: 0x3a
[ 10.567553] dwmac1000: Master AXI performs any burst length
[ 10.567616] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 10.572184] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[ 10.710749] dwmac1000: Master AXI performs any burst length
[ 10.710789] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 10.715238] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 10.830188] usbcore: registered new interface driver usbfs
[ 10.830293] usbcore: registered new interface driver hub
[ 10.834613] usbcore: registered new device driver usb
[ 10.863268] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.870547] ehci-platform: EHCI generic platform driver
[ 10.888376] ehci-pci: EHCI PCI platform driver
[ 10.935933] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 11.236358] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 11.236442] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 11.240977] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 11.248379] xhci-hcd xhci-hcd.0.auto: irq 169, io mem 0x11000000
[ 11.258143] hub 1-0:1.0: USB hub found
[ 11.263478] hub 1-0:1.0: 1 port detected
[ 11.267094] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 11.270945] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 11.276522] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 11.284383] hub 2-0:1.0: USB hub found
[ 11.292151] hub 2-0:1.0: 1 port detected
[ 11.356350] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 11.356394] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 11.360978] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 11.368377] xhci-hcd xhci-hcd.1.auto: irq 170, io mem 0x10000000
[ 11.377520] hub 3-0:1.0: USB hub found
[ 11.383310] hub 3-0:1.0: 1 port detected
[ 11.387066] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 11.390941] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 11.396246] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 11.404275] hub 4-0:1.0: USB hub found
[ 11.412142] hub 4-0:1.0: 1 port detected
[ 11.597744] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 11.737696] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 16.450116] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 16.450156] usb usb4: USB disconnect, device number 1
[ 16.454621] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered
[ 16.459272] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 16.464921] usb usb3: USB disconnect, device number 1
[ 16.469920] usb 3-1: USB disconnect, device number 2
[ 16.475777] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered
[ 16.485878] xhci-hcd xhci-hcd.0.auto: remove, state 1
[ 16.485917] usb usb2: USB disconnect, device number 1
[ 16.491577] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
[ 16.498978] xhci-hcd xhci-hcd.0.auto: remove, state 1
[ 16.501294] usb usb1: USB disconnect, device number 1
[ 16.506695] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
[ 16.555137] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 16.555218] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 16.559748] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 16.567082] xhci-hcd xhci-hcd.0.auto: irq 169, io mem 0x11000000
[ 16.576320] hub 1-0:1.0: USB hub found
[ 16.582365] hub 1-0:1.0: 1 port detected
[ 16.585953] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 16.589718] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 16.595023] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 16.603029] hub 2-0:1.0: USB hub found
[ 16.611172] hub 2-0:1.0: 1 port detected
[ 16.614838] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 16.618569] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 16.623918] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 16.631384] xhci-hcd xhci-hcd.1.auto: irq 170, io mem 0x10000000
[ 16.640593] hub 3-0:1.0: USB hub found
[ 16.646508] hub 3-0:1.0: 1 port detected
[ 16.650282] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 16.653887] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 16.659347] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 16.667206] hub 4-0:1.0: USB hub found
[ 16.675415] hub 4-0:1.0: 1 port detected
[ 16.711104] SCSI subsystem initialized
[ 16.796807] usbcore: registered new interface driver usb-storage
[ 16.913601] libata version 3.00 loaded.
[ 16.966169] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
[ 16.966218] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 16.970632] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
[ 16.979983] scsi host0: ahci
[ 16.987672] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 95
[ 17.007720] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 17.184624] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 17.188471] scsi host1: usb-storage 3-1:1.0
[ 17.319127] ata1: SATA link down (SStatus 0 SControl 300)
[ 17.442219] sdhci: Secure Digital Host Controller Interface driver
[ 17.442243] sdhci: Copyright(c) Pierre Ossman
[ 17.454844] sdhci-pltfm: SDHCI platform and OF driver helper
[ 18.239403] scsi 1:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4
[ 18.240729] sd 1:0:0:0: [sda] 31457280 512-byte logical blocks: (16.1 GB/15.0 GiB)
[ 18.247276] sd 1:0:0:0: [sda] Write Protect is off
[ 18.254008] sd 1:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 18.254730] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 18.264654] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 18.869152] EXT4-fs (sda): Ignoring removed nobh option
[ 18.871528] EXT4-fs (sda): barriers disabled
[ 18.878289] EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: init_itable=0,nobarrier,nobh,barrier=0
[ 19.183821] device br0 entered promiscuous mode
[ 19.245549] br0: port 1(vlan1) entered blocking state
[ 19.245573] br0: port 1(vlan1) entered disabled state
[ 19.249889] device vlan1 entered promiscuous mode
[ 19.254604] device eth0 entered promiscuous mode
[ 19.259422] br0: port 1(vlan1) entered blocking state
[ 19.263982] br0: port 1(vlan1) entered forwarding state
[ 19.301629] br0: port 2(vlan2) entered blocking state
[ 19.301652] br0: port 2(vlan2) entered disabled state
[ 19.305863] device vlan2 entered promiscuous mode
[ 19.310866] br0: port 2(vlan2) entered blocking state
[ 19.315374] br0: port 2(vlan2) entered forwarding state
[ 19.327531] device br0 left promiscuous mode
[ 19.329872] device br0 entered promiscuous mode
[ 19.336767] device br0 left promiscuous mode
[ 19.404402] ath: EEPROM regdomain: 0x8348
[ 19.404407] ath: EEPROM indicates we should expect a country code
[ 19.404411] ath: doing EEPROM country->regdmn map search
[ 19.404416] ath: country maps to regdmn code: 0x3a
[ 19.404421] ath: Country alpha2 being used: US
[ 19.404426] ath: Regpair used: 0x3a
[ 19.404431] ath: regdomain 0x8348 dynamically updated by user
[ 19.404448] ath: EEPROM regdomain: 0x8348
[ 19.404450] ath: EEPROM indicates we should expect a country code
[ 19.404454] ath: doing EEPROM country->regdmn map search
[ 19.404458] ath: country maps to regdmn code: 0x3a
[ 19.404461] ath: Country alpha2 being used: US
[ 19.404465] ath: Regpair used: 0x3a
[ 19.404468] ath: regdomain 0x8348 dynamically updated by user
[ 23.675256] tun: Universal TUN/TAP device driver, 1.6
[ 23.675277] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 25.635600] lzma_compress: module license 'unspecified' taints kernel.
[ 25.635625] Disabling lock debugging due to kernel taint
[ 25.703163] jffs2: version 2.2. (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc.
[ 26.279044] ubi0: default fastmap pool size: 10
[ 26.279066] ubi0: default fastmap WL pool size: 5
[ 26.282372] ubi0: attaching mtd18
[ 26.451099] ubi0: scanning is finished
[ 26.451120] ubi0: empty MTD device detected
[ 26.473317] ubi0: attached mtd18 (name "ddwrt", size 32 MiB)
[ 26.473339] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 26.478097] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 26.484717] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 26.491650] ubi0: good PEBs: 260, bad PEBs: 0, corrupted PEBs: 0
[ 26.498394] ubi0: user volume: 0, internal volumes: 1, max. volumes count: 128
[ 26.504598] ubi0: max/mean erase counter: 0/0, WL threshold: 4096, image sequence number: 3611193537
[ 26.511704] ubi0: available PEBs: 234, total reserved PEBs: 26, PEBs reserved for bad PEB handling: 20
[ 26.520992] ubi0: background thread "ubi_bgt0d" started, PID 1444
root@EA8500:~# ps
PID USER VSZ STAT COMMAND
1 root 1032 S /sbin/init
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
4 root 0 SW [kworker/0:0]
5 root 0 SW< [kworker/0:0H]
6 root 0 SW [kworker/u4:0]
7 root 0 SW [rcu_sched]
8 root 0 SW [rcu_bh]
9 root 0 SW [migration/0]
10 root 0 SW< [lru-add-drain]
11 root 0 SW [cpuhp/0]
12 root 0 SW [cpuhp/1]
13 root 0 SW [migration/1]
14 root 0 SW [ksoftirqd/1]
15 root 0 SW [kworker/1:0]
16 root 0 SW< [kworker/1:0H]
17 root 0 SW [oom_reaper]
18 root 0 SW< [writeback]
19 root 0 SW [kcompactd0]
20 root 0 SW< [crypto]
21 root 0 SW< [bioset]
22 root 0 SW< [kblockd]
23 root 0 SW< [watchdogd]
25 root 0 SW [kworker/0:1]
42 root 0 SW [kswapd0]
43 root 0 SW< [vmstat]
69 root 0 SW< [cryptodev_queue]
72 root 0 SW< [bioset]
73 root 0 SW< [bioset]
74 root 0 SW< [bioset]
75 root 0 SW< [bioset]
76 root 0 SW< [bioset]
77 root 0 SW< [bioset]
78 root 0 SW< [bioset]
79 root 0 SW [kworker/1:1]
80 root 0 SW< [bioset]
81 root 0 SW< [bioset]
82 root 0 SW< [bioset]
83 root 0 SW< [bioset]
84 root 0 SW< [bioset]
85 root 0 SW< [bioset]
86 root 0 SW< [bioset]
87 root 0 SW< [bioset]
88 root 0 SW< [bioset]
89 root 0 SW< [bioset]
90 root 0 SW< [bioset]
91 root 0 SW< [bioset]
96 root 0 SW< [kworker/1:1H]
97 root 0 SW< [kworker/0:1H]
734 root 728 S /sbin/hotplug2 --set-rules-file /etc/hotplug2.rules --persistent
738 root 776 S /sbin/mstpd
746 root 1756 S watchdog
771 root 0 SW< [cfg80211]
779 root 0 SW< [ath10k_wq]
780 root 0 SW< [ath10k_aux_wq]
781 root 0 SW [kworker/u4:2]
783 root 0 SW< [ath10k_wq]
784 root 0 SW< [ath10k_aux_wq]
901 root 0 SW< [ata_sff]
906 root 0 SW [scsi_eh_0]
907 root 0 SW< [scsi_tmf_0]
909 root 0 SW [scsi_eh_1]
911 root 0 SW< [scsi_tmf_1]
912 root 0 SW [usb-storage]
938 root 0 SW< [bioset]
992 root 0 SW [jbd2/sda-8]
993 root 0 SW< [ext4-rsv-conver]
1135 root 1312 S syslogd -Z -L
1137 root 1312 S klogd
1161 root 1052 S dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_rsa_key -p 22 -s
1171 root 2356 S /usr/sbin/smbd -D --configfile=/tmp/smb.conf
1173 root 2136 S /usr/sbin/nmbd -D --configfile=/tmp/smb.conf
1204 root 3360 S /tmp/openvpnserver --config /tmp/openvpn/openvpn.conf --route-up /tmp/openvpn/route-up.sh --
1261 root 1736 S dnsmasq -u root -g root --conf-file=/tmp/dnsmasq.conf
1266 root 1716 S wland
1335 root 704 S cron
1391 root 1428 S resetbutton
1411 root 1756 S process_monitor
1427 root 4768 S httpd -n -p 80
1444 root 0 SW [ubi_bgt0d]
1600 root 1112 S dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_rsa_key -p 22 -s
1601 root 1312 S -sh
1606 root 1312 R ps
root@EA8500:~#