DD-WRT v3.0-r37139 std (c) 2018 NewMedia-NET GmbH Release: 10/04/18 DD-WRT login: root Password: ========================================================== ___ ___ _ _____ ______ ____ ___ / _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \ / // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // / /____/____/ |__/|__/_/|_| /_/ |___/____(_)___/ DD-WRT v3.0 http://www.dd-wrt.com ========================================================== BusyBox v1.29.3 (2018-10-04 02:52:34 CEST) built-in shell (ash) root@DD-WRT:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.131-rc1 (root@seg-desktop) (gcc version 8.2.0 (OpenWrt GCC 8.2.0 r7577-d14647dd59) ) #178 SMP PREEMPT Thu Oct 4 00:35:11 CEST 2018 [ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt:Machine model: Linksys EA8500 WiFi Router [ 0.000000] OF: fdt:Ignoring memory range 0x41500000 - 0x42000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 122880 [ 0.000000] free_area_init_node: node 0, pgdat c0b44740, node_mem_map ddc39000 [ 0.000000] Normal zone: 960 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 122880 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 13 pages/cpu @ddc06000 s21068 r8192 d23988 u53248 [ 0.000000] pcpu-alloc: s21068 r8192 d23988 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920 [ 0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:14 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 478132K/491520K available (5120K kernel code, 277K rwdata, 1056K rodata, 1024K init, 407K bss, 13388K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xde800000 - 0xff800000 ( 528 MB) [ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0800000 (6112 kB) [ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB) [ 0.000000] .data : 0xc0b00000 - 0xc0b45448 ( 278 kB) [ 0.000000] .bss : 0xc0b47000 - 0xc0bace4c ( 408 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns [ 0.000006] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns [ 0.000020] Switching to timer-based delay loop, resolution 160ns [ 0.000193] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500) [ 0.000216] pid_max: default: 32768 minimum: 301 [ 0.000339] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000354] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000945] CPU: Testing write buffer coherency: ok [ 0.001239] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001292] Setting up static identity map for 0x42300000 - 0x42300034 [ 0.176881] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.177085] Brought up 2 CPUs [ 0.177104] SMP: Total of 2 processors activated (25.00 BogoMIPS). [ 0.177115] CPU: All CPU(s) started in SVC mode. [ 0.189805] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0 [ 0.189996] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.190021] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.190106] pinctrl core: initialized pinctrl subsystem [ 0.191421] NET: Registered protocol family 16 [ 0.191788] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.217278] cpuidle: using governor ladder [ 0.248297] cpuidle: using governor menu [ 0.301225] msm_bus_fabric_init_driver [ 0.302169] pps_core: LinuxPPS API ver. 1 registered [ 0.302185] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.302223] PTP clock support registered [ 0.304087] clocksource: Switched to clocksource dg_timer [ 0.308175] NET: Registered protocol family 2 [ 0.309034] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.309077] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.309130] TCP: Hash tables configured (established 4096 bind 4096) [ 0.309187] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.309209] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.309399] NET: Registered protocol family 1 [ 0.309453] PCI: CLS 0 bytes, default 64 [ 0.320281] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 0.327186] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.335259] io scheduler noop registered [ 0.335276] io scheduler deadline registered (default) [ 0.337021] 1b500000.pci supply vdda not found, using dummy regulator [ 0.337128] 1b500000.pci supply vdda_phy not found, using dummy regulator [ 0.337226] 1b500000.pci supply vdda_refclk not found, using dummy regulator [ 0.338034] OF: PCI: host bridge /soc/pci@1b500000 ranges: [ 0.338076] OF: PCI: IO 0x0fe00000..0x0fefffff -> 0x0fe00000 [ 0.338101] OF: PCI: MEM 0x08000000..0x0fdfffff -> 0x08000000 [ 0.446248] qcom-pcie 1b500000.pci: link up [ 0.446437] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00 [ 0.446461] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.446480] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff]) [ 0.446495] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff] [ 0.446548] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400 [ 0.446701] pci 0000:00:00.0: supports D1 [ 0.446711] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 0.447020] PCI: bus0: Fast back to back transfers disabled [ 0.447345] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000 [ 0.447595] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 0.448760] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.449411] PCI: bus1: Fast back to back transfers disabled [ 0.449698] pci 0000:00:00.0: BAR 14: assigned [mem 0x08000000-0x081fffff] [ 0.449723] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit] [ 0.449860] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 0.449884] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff] [ 0.450314] aer 0000:00:00.0:pcie002: service driver aer loaded [ 0.450773] 1b700000.pci supply vdda not found, using dummy regulator [ 0.450886] 1b700000.pci supply vdda_phy not found, using dummy regulator [ 0.450973] 1b700000.pci supply vdda_refclk not found, using dummy regulator [ 0.451740] OF: PCI: host bridge /soc/pci@1b700000 ranges: [ 0.451774] OF: PCI: IO 0x31e00000..0x31efffff -> 0x31e00000 [ 0.451796] OF: PCI: MEM 0x2e000000..0x31dfffff -> 0x2e000000 [ 0.562051] qcom-pcie 1b700000.pci: link up [ 0.562219] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00 [ 0.562239] pci_bus 0001:00: root bus resource [bus 00-ff] [ 0.562254] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff] [ 0.562298] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400 [ 0.562424] pci 0001:00:00.0: supports D1 [ 0.562434] pci 0001:00:00.0: PME# supported from D0 D1 D3hot [ 0.562695] PCI: bus0: Fast back to back transfers disabled [ 0.562998] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000 [ 0.563224] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 0.564405] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold [ 0.565010] PCI: bus1: Fast back to back transfers disabled [ 0.565388] pci 0001:00:00.0: BAR 14: assigned [mem 0x2e000000-0x2e1fffff] [ 0.565413] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit] [ 0.565537] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 0.565557] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff] [ 0.565922] aer 0001:00:00.0:pcie002: service driver aer loaded [ 0.566919] deviceless supply s1b not found, using dummy regulator [ 0.568912] L2 @ QSB rate. Forcing new rate. [ 0.569087] L2 @ 800000 KHz [ 0.569199] CPU0 @ 800000 KHz [ 0.569210] CPU1 @ QSB rate. Forcing new rate. [ 0.569336] CPU1 @ 800000 KHz [ 0.571410] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0 [ 0.572859] serial8250_init [ 0.572872] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.573871] msm_serial 16340000.serial: msm_serial: detected port #0 [ 0.573949] msm_serial 16340000.serial: uartclk = 7372800 [ 0.574003] physical 16340000 = virtual de879000 [ 0.574019] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 168, base_baud = 460800) is a MSM [ 0.574056] msm_serial: console setup on port #0 [ 1.274103] console [ttyMSM0] enabled [ 1.278928] msm_serial: driver initialized [ 1.284036] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1 [ 1.286310] nand: AMD/Spansion S34MS01G2 [ 1.292729] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 1.297400] 19 ofpart partitions found on MTD device qcom_nand.0 [ 1.304014] Creating 19 MTD partitions on "qcom_nand.0": [ 1.310315] 0x000000000000-0x000000040000 : "SBL1" [ 1.327049] 0x000000040000-0x000000180000 : "MIBIB" [ 1.339922] 0x000000180000-0x0000002c0000 : "SBL2" [ 1.352864] 0x0000002c0000-0x000000540000 : "SBL3" [ 1.353484] random: fast init done [ 1.370519] 0x000000540000-0x000000660000 : "DDRCONFIG" [ 1.383330] 0x000000660000-0x000000780000 : "SSD" [ 1.396303] 0x000000780000-0x000000a00000 : "TZ" [ 1.400493] 0x000000a00000-0x000000c80000 : "RPM" [ 1.415266] 0x000000c80000-0x000000dc0000 : "art" [ 1.428380] 0x000000dc0000-0x000000ec0000 : "APPSBL" [ 1.441125] 0x000000ec0000-0x000000f00000 : "u_env" [ 1.442317] 0x000000f00000-0x000000f40000 : "s_env" [ 1.456568] 0x000000f40000-0x000000f80000 : "devinfo" [ 1.468274] 0x000000f80000-0x000003780000 : "linux" [ 1.534400] 0x000001280000-0x000003780000 : "rootfs" [ 1.587953] mtd: partition "rootfs" set to be root filesystem [ 1.587982] 0x000003780000-0x000005f40000 : "linux2" [ 1.661721] 0x000003a80000-0x000005f40000 : "rootfs2" [ 1.724329] 0x000005f40000-0x000005f80000 : "nvram" [ 1.736052] 0x000005f80000-0x000008000000 : "ddwrt" [ 1.758286] random: crng init done [ 1.793038] libphy: GPIO Bitbanged MDIO: probed [ 1.796231] libphy: Fixed MDIO Bus: probed [ 1.817490] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0 [ 2.714299] stmmac - user ID: 0x10, Synopsys ID: 0x37 [ 2.714326] Ring mode enabled [ 2.718323] DMA HW capability register supported [ 2.721276] Enhanced/Alternate descriptors [ 2.726917] Enabled extended descriptors [ 2.729876] RX Checksum Offload Engine supported [ 2.734042] COE Type 2 [ 2.738816] TX Checksum insertion supported [ 2.740988] Wake-Up On Lan supported [ 2.745572] Enable RX Mitigation via HW Watchdog Timer [ 2.750404] stmmac - user ID: 0x10, Synopsys ID: 0x37 [ 2.754096] Ring mode enabled [ 2.759377] DMA HW capability register supported [ 2.762256] Enhanced/Alternate descriptors [ 2.767897] Enabled extended descriptors [ 2.770854] RX Checksum Offload Engine supported [ 2.775088] COE Type 2 [ 2.779704] TX Checksum insertion supported [ 2.781965] Wake-Up On Lan supported [ 2.786560] Enable RX Mitigation via HW Watchdog Timer [ 2.790636] i2c /dev entries driver [ 2.795792] Calibration not found. [ 2.798551] qcom-tsens 900000.thermal-sensor: tsens calibration failed [ 2.803127] CPUidle arm: CPU 0 failed to init idle CPU ops [ 2.808936] GACT probability NOT on [ 2.814006] Mirror/redirect action on [ 2.817487] Simple TC action Loaded [ 2.821781] netem: version 1.3 [ 2.824584] u32 classifier [ 2.827622] Performance counters on [ 2.830315] input device check on [ 2.834049] Actions configured [ 2.837955] Netfilter messages via NETLINK v0.30. [ 2.841391] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) [ 2.846609] nf_conntrack_rtsp v0.7 loading [ 2.852220] xt_time: kernel timezone is -0000 [ 2.856012] ip_set: protocol 6 [ 2.860532] gre: GRE over IPv4 demultiplexor driver [ 2.864306] nf_nat_rtsp v0.7 loading [ 2.868177] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.872121] NET: Registered protocol family 17 [ 2.877348] Bridge firewalling registered [ 2.881447] 8021q: 802.1Q VLAN Support v1.8 [ 2.885746] Registering SWP/SWPB emulation handler [ 2.899524] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342 [ 2.918351] s1a: Bringing 0uV into 1050000-1050000uV [ 2.918630] s1b: Bringing 0uV into 1050000-1050000uV [ 2.922597] s2a: Bringing 0uV into 800000-800000uV [ 2.927652] s2b: Bringing 0uV into 800000-800000uV [ 2.934416] thermal thermal_zone0: failed to read out thermal zone (-110) [ 2.937947] trying to register driver cpufreq-dt [ 2.945224] searching for nvram [ 2.948263] nvram size = 262144 [ 2.982236] no valid UBI magic found inside mtd13 [ 2.982268] hctosys: unable to open rtc device (rtc0) [ 2.990005] VFS: Mounted root (squashfs filesystem) readonly on device 31:14. [ 2.990802] Freeing unused kernel memory: 1024K [ 5.651984] lzma_compress: module license 'unspecified' taints kernel. [ 5.652012] Disabling lock debugging due to kernel taint [ 5.692790] Loading modules backported from Linux version wireless-drivers-next-for-davem-2017-09-01-0-geb464d4a8d09 [ 5.692823] Backport generated by backports.git backports-20160324-111-g97b8d7c4 [ 6.190219] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142) [ 6.190843] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 6.367018] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2 [ 6.367058] ath10k_pci 0000:01:00.0: Falling back to user helper [ 6.378903] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2 [ 6.382778] ath10k_pci 0000:01:00.0: Falling back to user helper [ 6.761933] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002 [ 6.761971] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0 [ 6.773066] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.5.3-00050 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 5ae23169 [ 9.080938] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002 from ath10k/QCA99X0/hw2.0/board-2.bin [ 9.081368] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 d3e0cdb5 [ 10.291534] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1 [ 10.386614] ath: EEPROM regdomain: 0x0 [ 10.386621] ath: EEPROM indicates default country code should be used [ 10.386625] ath: doing EEPROM country->regdmn map search [ 10.386634] ath: country maps to regdmn code: 0x3a [ 10.386640] ath: Country alpha2 being used: US [ 10.386644] ath: Regpair used: 0x3a [ 10.394796] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142) [ 10.395369] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 10.566903] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0001:01:00.0.bin failed with error -2 [ 10.566950] ath10k_pci 0001:01:00.0: Falling back to user helper [ 10.578484] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2 [ 10.582670] ath10k_pci 0001:01:00.0: Falling back to user helper [ 10.594595] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002 [ 10.599692] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0 [ 10.613783] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.5.3-00050 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 5ae23169 [ 12.904386] ath10k_pci 0001:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002 from ath10k/QCA99X0/hw2.0/board-2.bin [ 12.904725] ath10k_pci 0001:01:00.0: board_file api 1 bmi_id N/A crc32 402a8111 [ 14.109023] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1 [ 14.196884] ath: EEPROM regdomain: 0x0 [ 14.196892] ath: EEPROM indicates default country code should be used [ 14.196897] ath: doing EEPROM country->regdmn map search [ 14.196906] ath: country maps to regdmn code: 0x3a [ 14.196912] ath: Country alpha2 being used: US [ 14.196917] ath: Regpair used: 0x3a [ 15.156630] dwmac1000: Master AXI performs any burst length [ 15.156690] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported [ 15.162076] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock [ 15.214320] dwmac1000: Master AXI performs any burst length [ 15.214379] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported [ 15.219215] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock [ 16.174692] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 17.176151] device br0 entered promiscuous mode [ 17.237339] br0: port 1(vlan1) entered blocking state [ 17.237368] br0: port 1(vlan1) entered disabled state [ 17.241926] device vlan1 entered promiscuous mode [ 17.246735] device eth0 entered promiscuous mode [ 17.257891] br0: port 1(vlan1) entered blocking state [ 17.257921] br0: port 1(vlan1) entered forwarding state [ 17.262698] device br0 left promiscuous mode [ 17.271231] device br0 entered promiscuous mode [ 17.287220] device br0 left promiscuous mode [ 17.360743] ath: EEPROM regdomain: 0x8348 [ 17.360749] ath: EEPROM indicates we should expect a country code [ 17.360755] ath: doing EEPROM country->regdmn map search [ 17.360763] ath: country maps to regdmn code: 0x3a [ 17.360768] ath: Country alpha2 being used: US [ 17.360771] ath: Regpair used: 0x3a [ 17.360777] ath: regdomain 0x8348 dynamically updated by user [ 17.360796] ath: EEPROM regdomain: 0x8348 [ 17.360800] ath: EEPROM indicates we should expect a country code [ 17.360805] ath: doing EEPROM country->regdmn map search [ 17.360809] ath: country maps to regdmn code: 0x3a [ 17.360813] ath: Country alpha2 being used: US [ 17.360818] ath: Regpair used: 0x3a [ 17.360822] ath: regdomain 0x8348 dynamically updated by user [ 28.385498] br0: port 2(ath0) entered blocking state [ 28.385528] br0: port 2(ath0) entered disabled state [ 28.390048] device ath0 entered promiscuous mode [ 28.940777] br0: port 2(ath0) entered blocking state [ 28.940809] br0: port 2(ath0) entered forwarding state [ 40.218731] br0: port 3(ath1) entered blocking state [ 40.218762] br0: port 3(ath1) entered disabled state [ 40.223130] device ath1 entered promiscuous mode [ 40.227876] br0: port 3(ath1) entered blocking state [ 40.232313] br0: port 3(ath1) entered forwarding state [ 40.546420] device vlan2 entered promiscuous mode [ 40.645316] fast-classifier: starting up [ 40.645386] fast-classifier: registered [ 41.128946] device vlan2 left promiscuous mode [ 186.631545] usbcore: registered new interface driver usbfs [ 186.632318] usbcore: registered new interface driver hub [ 186.636442] usbcore: registered new device driver usb [ 186.677292] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 186.687576] ehci-platform: EHCI generic platform driver [ 186.712934] ehci-pci: EHCI PCI platform driver [ 186.771749] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 187.093739] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 187.093880] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 187.098580] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010 [ 187.105799] xhci-hcd xhci-hcd.0.auto: irq 169, io mem 0x11000000 [ 187.115674] hub 1-0:1.0: USB hub found [ 187.121467] hub 1-0:1.0: 1 port detected [ 187.124665] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 187.128269] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 187.133628] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 187.141900] hub 2-0:1.0: USB hub found [ 187.149565] hub 2-0:1.0: 1 port detected [ 187.213197] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 187.213254] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 187.217857] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010 [ 187.225477] xhci-hcd xhci-hcd.1.auto: irq 170, io mem 0x10000000 [ 187.234495] hub 3-0:1.0: USB hub found [ 187.240388] hub 3-0:1.0: 1 port detected [ 187.244014] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 187.247833] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 187.253099] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 187.261332] hub 4-0:1.0: USB hub found [ 187.269736] hub 4-0:1.0: 1 port detected [ 187.605244] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 192.309556] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 192.309613] usb usb4: USB disconnect, device number 1 [ 192.314524] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered [ 192.318680] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 192.330280] usb usb3: USB disconnect, device number 1 [ 192.330314] usb 3-1: USB disconnect, device number 2 [ 192.336067] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered [ 192.339469] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 192.355767] usb usb2: USB disconnect, device number 1 [ 192.362645] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 192.362728] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 192.374580] usb usb1: USB disconnect, device number 1 [ 192.378090] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 192.415416] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 192.415550] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 192.420014] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010 [ 192.427852] xhci-hcd xhci-hcd.0.auto: irq 169, io mem 0x11000000 [ 192.436924] hub 1-0:1.0: USB hub found [ 192.444605] hub 1-0:1.0: 1 port detected [ 192.447131] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 192.450129] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 192.455577] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 192.465193] hub 2-0:1.0: USB hub found [ 192.471327] hub 2-0:1.0: 1 port detected [ 192.475727] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 192.478955] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 192.484289] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010 [ 192.491719] xhci-hcd xhci-hcd.1.auto: irq 170, io mem 0x10000000 [ 192.502218] hub 3-0:1.0: USB hub found [ 192.507044] hub 3-0:1.0: 1 port detected [ 192.510879] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 192.514433] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 192.519583] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 192.528890] hub 4-0:1.0: USB hub found [ 192.535487] hub 4-0:1.0: 1 port detected [ 192.589688] SCSI subsystem initialized [ 192.688719] usbcore: registered new interface driver usb-storage [ 192.769913] libata version 3.00 loaded. [ 192.837813] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x0 impl platform mode [ 192.837847] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst [ 192.846474] scsi host0: ahci [ 192.854006] ata1: DUMMY [ 192.904488] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 193.082090] usb-storage 3-1:1.0: USB Mass Storage device detected [ 193.093032] scsi host1: usb-storage 3-1:1.0 [ 194.107569] scsi 1:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4 [ 194.110585] sd 1:0:0:0: [sda] 31457280 512-byte logical blocks: (16.1 GB/15.0 GiB) [ 194.115748] sd 1:0:0:0: [sda] Write Protect is off [ 194.122108] sd 1:0:0:0: [sda] Mode Sense: 23 00 00 00 [ 194.122910] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 194.131418] sda: sda1 [ 194.139842] sd 1:0:0:0: [sda] Attached SCSI removable disk [ 367.916717] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 367.916772] usb usb4: USB disconnect, device number 1 [ 367.921545] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered [ 367.926012] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 367.931546] usb usb3: USB disconnect, device number 1 [ 367.937720] usb 3-1: USB disconnect, device number 2 [ 367.977065] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered [ 367.977200] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 367.984639] usb usb2: USB disconnect, device number 1 [ 368.002516] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 368.002598] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 368.024651] usb usb1: USB disconnect, device number 1 [ 368.035170] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 368.067199] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 368.067293] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 368.071782] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010 [ 368.079282] xhci-hcd xhci-hcd.0.auto: irq 169, io mem 0x11000000 [ 368.080056] hub 1-0:1.0: USB hub found [ 368.080101] hub 1-0:1.0: 1 port detected [ 368.080938] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 368.080969] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 368.081068] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 368.081690] hub 2-0:1.0: USB hub found [ 368.081728] hub 2-0:1.0: 1 port detected [ 368.082236] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 368.082272] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 368.082582] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010 [ 368.082608] xhci-hcd xhci-hcd.1.auto: irq 170, io mem 0x10000000 [ 368.083284] hub 3-0:1.0: USB hub found [ 368.083326] hub 3-0:1.0: 1 port detected [ 368.083734] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 368.083764] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 368.083875] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 368.084705] hub 4-0:1.0: USB hub found [ 368.084746] hub 4-0:1.0: 1 port detected [ 368.322958] hotplug (2280): drop_caches: 3 [ 368.325540] hotplug (2281): drop_caches: 3 [ 368.434512] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 368.612268] usb-storage 3-1:1.0: USB Mass Storage device detected [ 368.635368] scsi host1: usb-storage 3-1:1.0 [ 369.707768] scsi 1:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4 [ 369.711887] sd 1:0:0:0: [sda] 31457280 512-byte logical blocks: (16.1 GB/15.0 GiB) [ 369.715832] sd 1:0:0:0: [sda] Write Protect is off [ 369.722307] sd 1:0:0:0: [sda] Mode Sense: 23 00 00 00 [ 369.723103] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 369.732019] sda: sda1 [ 369.740158] sd 1:0:0:0: [sda] Attached SCSI removable disk root@DD-WRT:~#