## Linksys EA8500 ## DD-WRT v3.0-r31500M kongat (02/23/17) ## Linux 3.18.48 #70 SMP PREEMPT Thu Feb 23 11:41:09 CET 2017 armv7l ## conf 'Client Mode' to 2nd ea8500 ## reboot root@DD-WRT:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.18.48 (bluebat@opensuse.site) (gcc version 6.3.0 (LEDE GCC 6.3.0 r2695-c9c68c7) ) #70 SMP PREEMPT Thu Feb 23 11:41:09 CET 2017 [ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Linksys EA8500 WiFi Router [ 0.000000] Ignoring memory range 0x41500000 - 0x42000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 122880 [ 0.000000] free_area_init_node: node 0, pgdat c0726840, node_mem_map ddb40000 [ 0.000000] Normal zone: 960 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 122880 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 9 pages/cpu @ddfd3000 s7552 r8192 d21120 u36864 [ 0.000000] pcpu-alloc: s7552 r8192 d21120 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920 [ 0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:16 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 481196K/491520K available (3878K kernel code, 283K rwdata, 1108K rodata, 188K init, 403K bss, 10324K reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xde800000 - 0xff000000 ( 520 MB) [ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc06e6e1c (4988 kB) [ 0.000000] .init : 0xc06e7000 - 0xc0716000 ( 188 kB) [ 0.000000] .data : 0xc0716000 - 0xc075cc04 ( 284 kB) [ 0.000000] .bss : 0xc075cc04 - 0xc07c1b84 ( 404 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000012] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 687194767200ns [ 0.000029] Switching to timer-based delay loop, resolution 160ns [ 0.000440] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500) [ 0.000462] pid_max: default: 32768 minimum: 301 [ 0.000710] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000727] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001374] CPU: Testing write buffer coherency: ok [ 0.001636] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002144] Setting up static identity map for 0x42213180 - 0x422131d8 [ 0.063434] CPU1: Booted secondary processor [ 0.063567] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.063682] Brought up 2 CPUs [ 0.063704] SMP: Total of 2 processors activated (25.00 BogoMIPS). [ 0.063715] CPU: All CPU(s) started in SVC mode. [ 0.078439] VFP support v0.3: implementor 51 architecture 0 part 4d variant 2 rev 0 [ 0.078971] pinctrl core: initialized pinctrl subsystem [ 0.089255] NET: Registered protocol family 16 [ 0.089582] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.113852] cpuidle: using governor ladder [ 0.144867] cpuidle: using governor menu [ 0.163993] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342 [ 0.164077] qcom_rpm 108000.rpm: failed to mark ack irq as wakeup [ 0.164140] qcom_rpm 108000.rpm: failed to mark wakeup irq as wakeup [ 0.199453] pps_core: LinuxPPS API ver. 1 registered [ 0.199465] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.199509] PTP clock support registered [ 0.200609] pcie_init: pcie_init: unable to create IPC log context for pcie0-short [ 0.200622] pcie_init: pcie_init: unable to create IPC log context for pcie0-long [ 0.200632] pcie_init: pcie_init: unable to create IPC log context for pcie1-short [ 0.200642] pcie_init: pcie_init: unable to create IPC log context for pcie1-long [ 0.201045] Switched to clocksource dg_timer [ 0.202487] NET: Registered protocol family 2 [ 0.203184] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.203223] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.203276] TCP: Hash tables configured (established 4096 bind 4096) [ 0.203320] TCP: reno registered [ 0.203337] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.203359] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.203594] NET: Registered protocol family 1 [ 0.203653] PCI: CLS 0 bytes, default 64 [ 0.204756] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.204855] Crashlog allocated RAM at address 0x5ff00000 [ 0.205777] squashfs: version 3.0 (2006/03/15) Phillip Lougher [ 0.205821] msgmni has been set to 939 [ 0.207629] io scheduler noop registered [ 0.207648] io scheduler deadline registered (default) [ 0.208985] 1b500000.pci supply vdda not found, using dummy regulator [ 0.209070] 1b500000.pci supply vdda_phy not found, using dummy regulator [ 0.209150] 1b500000.pci supply vdda_refclk not found, using dummy regulator [ 0.240134] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00 [ 0.240156] pci_bus 0000:00: root bus resource [io 0xfe00000-0xfffff] (bus address [0x1fc00000-0xfefffff]) [ 0.240171] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff] [ 0.240187] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.240236] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400 [ 0.240373] pci 0000:00:00.0: supports D1 [ 0.240390] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 0.240701] PCI: bus0: Fast back to back transfers disabled [ 0.241049] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000 [ 0.241323] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 0.242265] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.242691] PCI: bus1: Fast back to back transfers disabled [ 0.242712] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.242864] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff] [ 0.242887] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit] [ 0.242999] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.243020] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff] [ 0.243461] aer 0000:00:00.0:pcie02: service driver aer loaded [ 0.243805] 1b700000.pci supply vdda not found, using dummy regulator [ 0.243889] 1b700000.pci supply vdda_phy not found, using dummy regulator [ 0.243977] 1b700000.pci supply vdda_refclk not found, using dummy regulator [ 0.274233] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00 [ 0.274252] pci_bus 0001:00: root bus resource [io 0x31e10000-0xfffff] (bus address [0x63c00000-0x31eeffff]) [ 0.274266] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff] [ 0.274282] pci_bus 0001:00: root bus resource [bus 00-ff] [ 0.274327] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400 [ 0.274446] pci 0001:00:00.0: supports D1 [ 0.274460] pci 0001:00:00.0: PME# supported from D0 D1 D3hot [ 0.274769] PCI: bus0: Fast back to back transfers disabled [ 0.275102] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000 [ 0.275299] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 0.276238] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold [ 0.276654] PCI: bus1: Fast back to back transfers disabled [ 0.276671] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.276886] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff] [ 0.276908] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit] [ 0.277014] pci 0001:00:00.0: PCI bridge to [bus 01] [ 0.277033] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff] [ 0.277421] aer 0001:00:00.0:pcie02: service driver aer loaded [ 0.277753] 1b900000.pci supply vdda not found, using dummy regulator [ 0.277837] 1b900000.pci supply vdda_phy not found, using dummy regulator [ 0.277917] 1b900000.pci supply vdda_refclk not found, using dummy regulator [ 0.412714] qcom-pcie 1b900000.pci: link initialization failed [ 0.414820] qcom-pcie 1b900000.pci: PCI host bridge to bus 0002:00 [ 0.414839] pci_bus 0002:00: root bus resource [io 0x35e20000-0xfffff] (bus address [0x6bc00000-0x35edffff]) [ 0.414854] pci_bus 0002:00: root bus resource [mem 0x32000000-0x35dfffff] [ 0.414875] pci_bus 0002:00: root bus resource [bus 00-ff] [ 0.414925] PCI: bus0: Fast back to back transfers enabled [ 0.417454] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0 [ 0.418790] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.419797] msm_serial 16340000.serial: msm_serial: detected port #0 [ 0.419893] msm_serial 16340000.serial: uartclk = 1843200 [ 0.419950] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 184, base_baud = 115200) is a MSM [ 0.420007] msm_serial: console setup on port #0 [ 1.133102] console [ttyMSM0] enabled [ 1.137878] msm_serial: driver initialized [ 1.144673] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1 [ 1.145147] nand: AMD/Spansion S34MS01G2 [ 1.151725] nand: 128MiB, SLC, page size: 2048, OOB size: 64 [ 1.155571] Scanning device for bad blocks [ 1.601170] random: nonblocking pool is initialized [ 1.929956] 19 ofpart partitions found on MTD device qcom-nandc [ 1.929984] Creating 19 MTD partitions on "qcom-nandc": [ 1.934771] 0x000000000000-0x000000040000 : "SBL1" [ 1.940782] 0x000000040000-0x000000180000 : "MIBIB" [ 1.945611] 0x000000180000-0x0000002c0000 : "SBL2" [ 1.950280] 0x0000002c0000-0x000000540000 : "SBL3" [ 1.955216] 0x000000540000-0x000000660000 : "DDRCONFIG" [ 1.959929] 0x000000660000-0x000000780000 : "SSD" [ 1.965096] 0x000000780000-0x000000a00000 : "TZ" [ 1.969904] 0x000000a00000-0x000000c80000 : "RPM" [ 1.974692] 0x000000c80000-0x000000dc0000 : "art" [ 1.979187] 0x000000dc0000-0x000000ec0000 : "APPSBL" [ 1.983955] 0x000000ec0000-0x000000f00000 : "u_env" [ 1.988944] 0x000000f00000-0x000000f40000 : "s_env" [ 1.993620] 0x000000f40000-0x000000f80000 : "devinfo" [ 1.998382] 0x000000f80000-0x000003780000 : "linux" [ 2.003705] 0x000001280000-0x000003780000 : "rootfs" [ 2.008324] mtd: partition "rootfs" set to be root filesystem [ 2.012805] 0x000003780000-0x000005f40000 : "linux2" [ 2.019172] 0x000003a80000-0x000005f40000 : "rootfs2" [ 2.024300] 0x000005f40000-0x000005f80000 : "nvram" [ 2.029112] 0x000005f80000-0x000008000000 : "ddwrt" [ 2.035153] IMQ: autocreate imq0 NS c0756ec0 [ 2.038429] IMQ: autocreate imq1 NS c0756ec0 [ 2.042477] IMQ driver loaded successfully. (numdevs = 16, numqueues = 1) [ 2.046744] Hooking IMQ after NAT on PREROUTING. [ 2.053630] Hooking IMQ before NAT on POSTROUTING. [ 2.058523] libphy: Fixed MDIO Bus: probed [ 2.063396] libphy: GPIO Bitbanged MDIO: probed [ 2.088258] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0 [ 2.867056] tun: Universal TUN/TAP device driver, 1.6 [ 2.867081] tun: (C) 1999-2004 Max Krasnyansky [ 2.872597] stmmac - user ID: 0x10, Synopsys ID: 0x37 [ 2.877160] Ring mode enabled [ 2.882377] DMA HW capability register supported [ 2.885230] Enhanced/Alternate descriptors [ 2.890003] Enabled extended descriptors [ 2.894074] RX Checksum Offload Engine supported (type 2) [ 2.898165] TX Checksum insertion supported [ 2.903628] Wake-Up On Lan supported [ 2.908034] Enable RX Mitigation via HW Watchdog Timer [ 2.912855] stmmac - user ID: 0x10, Synopsys ID: 0x37 [ 2.916568] Ring mode enabled [ 2.921857] DMA HW capability register supported [ 2.924726] Enhanced/Alternate descriptors [ 2.929498] Enabled extended descriptors [ 2.933559] RX Checksum Offload Engine supported (type 2) [ 2.937660] TX Checksum insertion supported [ 2.943116] Wake-Up On Lan supported [ 2.947525] Enable RX Mitigation via HW Watchdog Timer [ 2.951784] PPP generic driver version 2.4.2 [ 2.956216] PPP BSD Compression module registered [ 2.960588] PPP Deflate Compression module registered [ 2.965309] PPP MPPE Compression module registered [ 2.970235] NET: Registered protocol family 24 [ 2.975027] PPTP driver version 0.8.5 [ 2.979464] i2c /dev entries driver [ 2.988677] Speed bin: 0 [ 2.988700] PVS bin: 1 [ 2.990676] platform cpufreq-krait.0: Driver cpufreq-krait requests probe deferral [ 2.994474] L2 @ QSB rate. Forcing new rate. [ 3.000227] L2 @ 387500 KHz [ 3.004639] CPU0 @ 800000 KHz [ 3.006938] CPU1 @ QSB rate. Forcing new rate. [ 3.010147] CPU1 @ 384000 KHz [ 3.014758] GACT probability NOT on [ 3.017455] Mirror/redirect action on [ 3.020778] Simple TC action Loaded [ 3.025455] netem: version 1.3 [ 3.027914] u32 classifier [ 3.030980] Performance counters on [ 3.033746] input device check on [ 3.037405] Actions configured [ 3.041346] Netfilter messages via NETLINK v0.30. [ 3.044591] nf_conntrack version 0.5.0 (7518 buckets, 30072 max) [ 3.049640] nf_conntrack_rtsp v0.7 loading [ 3.056114] xt_time: kernel timezone is -0000 [ 3.059312] ip_set: protocol 6 [ 3.064097] gre: GRE over IPv4 demultiplexor driver [ 3.066922] nf_nat_rtsp v0.7 loading [ 3.071568] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.075483] TCP: bic registered [ 3.080557] TCP: cubic registered [ 3.083497] TCP: westwood registered [ 3.086893] TCP: highspeed registered [ 3.090537] TCP: hybla registered [ 3.094171] TCP: htcp registered [ 3.097396] TCP: vegas registered [ 3.100693] TCP: veno registered [ 3.103981] TCP: scalable registered [ 3.107204] TCP: lp registered [ 3.110764] TCP: yeah registered [ 3.113696] TCP: illinois registered [ 3.117019] NET: Registered protocol family 17 [ 3.120647] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 3.124944] Bridge firewalling registered [ 3.137659] 8021q: 802.1Q VLAN Support v1.8 [ 3.141693] Registering SWP/SWPB emulation handler [ 3.149302] trying to register driver generic_krait [ 3.150362] Frequency table not initialized. [ 3.155336] Frequency table not initialized. [ 3.159665] Frequency table not initialized. [ 3.163957] Frequency table not initialized. [ 3.168140] Frequency table not initialized. [ 3.173967] Frequency table not initialized. [ 3.176708] Frequency table not initialized. [ 3.180911] Frequency table not initialized. [ 3.185226] Frequency table not initialized. [ 3.189401] Frequency table not initialized. [ 3.194916] driver generic_krait up and running [ 3.197954] searching for nvram [ 3.202241] nvram size = -1066956542 [ 3.225120] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 3.232111] UBIFS error (pid 1): ubifs_mount: cannot open "ubi0:rootfs", error -19 [ 3.233933] VFS: Mounted root (squashfs filesystem) readonly on device 31:16. [ 3.238700] Freeing unused kernel memory: 188K (c06e7000 - c0716000) [ 5.621165] UBIFS error (pid 712): ubifs_mount: cannot open "ubi0:rootfs_data", error -19 [ 6.890755] Loading modules backported from Linux version wt-2016-10-03-1-g6fcb1a6 [ 6.890787] Backport generated by backports.git backports-20160324-9-g0e38f5c [ 7.340437] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142) [ 7.341004] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 7.473691] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2 [ 7.473740] ath10k_pci 0000:01:00.0: Falling back to user helper [ 7.816122] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002 [ 7.816165] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0 [ 7.826979] ath10k_pci 0000:01:00.0: firmware ver 10.4.3.00063 api 5 features no-p2p,peer-flow-ctrl crc32 a0d385ce [ 7.837247] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002 from ath10k/QCA99X0/hw2.0/board-2.bin [ 7.843098] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 d3e0cdb5 [ 8.681434] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 8.801450] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off [ 9.034412] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1 [ 9.109252] ath: EEPROM regdomain: 0x0 [ 9.109278] ath: EEPROM indicates default country code should be used [ 9.109293] ath: doing EEPROM country->regdmn map search [ 9.109315] ath: country maps to regdmn code: 0x3a [ 9.109332] ath: Country alpha2 being used: US [ 9.109348] ath: Regpair used: 0x3a [ 9.123024] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142) [ 9.123725] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 9.253495] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0001:01:00.0.bin failed with error -2 [ 9.253541] ath10k_pci 0001:01:00.0: Falling back to user helper [ 9.264582] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002 [ 9.269259] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0 [ 9.281917] ath10k_pci 0001:01:00.0: firmware ver 10.4.3.00063 api 5 features no-p2p,peer-flow-ctrl crc32 a0d385ce [ 9.286919] ath10k_pci 0001:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002 from ath10k/QCA99X0/hw2.0/board-2.bin [ 9.297175] ath10k_pci 0001:01:00.0: board_file api 1 bmi_id N/A crc32 402a8111 [ 10.488520] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1 [ 10.558511] ath: EEPROM regdomain: 0x0 [ 10.558534] ath: EEPROM indicates default country code should be used [ 10.558548] ath: doing EEPROM country->regdmn map search [ 10.558568] ath: country maps to regdmn code: 0x3a [ 10.558585] ath: Country alpha2 being used: US [ 10.558599] ath: Regpair used: 0x3a [ 12.280122] expr wrote to tcp_keepalive_time when file position was not 0! [ 12.280122] This will not be supported in the future. To silence this [ 12.280122] warning, set kernel.sysctl_writes_strict = -1 [ 12.940191] device br0 entered promiscuous mode [ 13.013275] device vlan1 entered promiscuous mode [ 13.013305] device eth0 entered promiscuous mode [ 13.067347] device vlan2 entered promiscuous mode [ 13.073821] br0: port 2(vlan2) entered forwarding state [ 13.073889] br0: port 2(vlan2) entered forwarding state [ 13.078617] br0: port 1(vlan1) entered forwarding state [ 13.083893] br0: port 1(vlan1) entered forwarding state [ 13.089232] device br0 left promiscuous mode [ 13.098698] device br0 entered promiscuous mode [ 13.114577] device br0 left promiscuous mode [ 15.072398] br0: port 2(vlan2) entered forwarding state [ 15.081395] br0: port 1(vlan1) entered forwarding state [ 24.283016] device ath0 entered promiscuous mode [ 24.283332] br0: port 3(ath0) entered forwarding state [ 24.286748] br0: port 3(ath0) entered forwarding state [ 26.281396] br0: port 3(ath0) entered forwarding state [ 27.276742] ath1: authenticate with c0:56:27:06:3a:00 [ 27.590870] ath1: send auth to c0:56:27:06:3a:00 (try 1/3) [ 27.701281] ath1: send auth to c0:56:27:06:3a:00 (try 2/3) [ 27.708678] ath1: authenticated [ 27.724610] ath1: associate with c0:56:27:06:3a:00 (try 1/3) [ 27.737039] ath1: RX AssocResp from c0:56:27:06:3a:00 (capab=0x11 status=0 aid=3) [ 27.751635] ath1: associated [ 27.911454] ath10k_pci 0001:01:00.0: firmware crashed! (uuid 0fb10ce3-6495-44ce-9b9f-c2ef1d62171e) [ 27.911495] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002 [ 27.919310] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0 [ 27.930639] ath10k_pci 0001:01:00.0: firmware ver 10.4.3.00063 api 5 features no-p2p,peer-flow-ctrl crc32 a0d385ce [ 27.936883] ath10k_pci 0001:01:00.0: board_file api 1 bmi_id N/A crc32 402a8111 [ 27.947000] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1 [ 27.956286] ath10k_pci 0001:01:00.0: firmware register dump: [ 27.963922] ath10k_pci 0001:01:00.0: [00]: 0x00000009 0x000015B3 0x009AE104 0x00955B31 [ 27.969567] ath10k_pci 0001:01:00.0: [04]: 0x009AE104 0x00060330 0x00000005 0x00000006 [ 27.977292] ath10k_pci 0001:01:00.0: [08]: 0x000F6404 0x00955A00 0x00000000 0x0040679C [ 27.985193] ath10k_pci 0001:01:00.0: [12]: 0x00000009 0x00000000 0x00981D24 0x00981D4E [ 27.993091] ath10k_pci 0001:01:00.0: [16]: 0x00953438 0x009406B6 0x009406B6 0x00000000 [ 28.001063] ath10k_pci 0001:01:00.0: [20]: 0x409AE104 0x004066CC 0x004067AC 0x00417D1C [ 28.008890] ath10k_pci 0001:01:00.0: [24]: 0x809A064F 0x0040672C 0x00000000 0xC09AE104 [ 28.016789] ath10k_pci 0001:01:00.0: [28]: 0x80981DA8 0x0040676C 0x000F6404 0x00421E5C [ 28.024687] ath10k_pci 0001:01:00.0: [32]: 0x80981E0A 0x0040678C 0x000F6404 0x00421E5C [ 28.032602] ath10k_pci 0001:01:00.0: [36]: 0x8099AE87 0x004067FC 0x00421E5C 0x00421E1C [ 28.040496] ath10k_pci 0001:01:00.0: [40]: 0x8099AE13 0x0040681C 0x004240C4 0x00443428 [ 28.048387] ath10k_pci 0001:01:00.0: [44]: 0x80943885 0x0040684C 0x00400000 0x00000002 [ 28.056285] ath10k_pci 0001:01:00.0: [48]: 0x80940E40 0x0040687C 0x0000001D 0x00000000 [ 28.064186] ath10k_pci 0001:01:00.0: [52]: 0x80940E13 0x004068AC 0x00400000 0x00000000 [ 28.072084] ath10k_pci 0001:01:00.0: [56]: 0x80940E5D 0x004068CC 0x00000000 0x00400600 [ 28.079985] ath10k_pci 0001:01:00.0: Copy Engine register dump: [ 28.087887] ath10k_pci 0001:01:00.0: [00]: 0x0004a000 14 14 3 3 [ 28.093700] ath10k_pci 0001:01:00.0: [01]: 0x0004a400 8 8 74 75 [ 28.100297] ath10k_pci 0001:01:00.0: [02]: 0x0004a800 37 37 36 37 [ 28.106723] ath10k_pci 0001:01:00.0: [03]: 0x0004ac00 20 20 22 20 [ 28.113145] ath10k_pci 0001:01:00.0: [04]: 0x0004b000 11 11 49 9 [ 28.119569] ath10k_pci 0001:01:00.0: [05]: 0x0004b400 19 19 50 51 [ 28.125991] ath10k_pci 0001:01:00.0: [06]: 0x0004b800 27 27 27 27 [ 28.132416] ath10k_pci 0001:01:00.0: [07]: 0x0004bc00 1 1 1 1 [ 28.138899] ath10k_pci 0001:01:00.0: [08]: 0x0004c000 0 0 127 0 [ 28.145263] ath10k_pci 0001:01:00.0: [09]: 0x0004c400 1 1 1 1 [ 28.151687] ath10k_pci 0001:01:00.0: [10]: 0x0004c800 0 0 0 0 [ 28.158110] ath10k_pci 0001:01:00.0: [11]: 0x0004cc00 0 0 0 0 [ 28.284349] ieee80211 phy1: Hardware restart was requested [ 29.876061] ath10k_pci 0001:01:00.0: device successfully recovered [ 29.923989] ath10k_pci 0001:01:00.0: firmware crashed! (uuid 327cec2a-3198-4d3c-85fa-686aa110425e) [ 29.924061] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002 [ 29.931871] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0 [ 29.950120] ath10k_pci 0001:01:00.0: firmware ver 10.4.3.00063 api 5 features no-p2p,peer-flow-ctrl crc32 a0d385ce [ 29.951351] ath10k_pci 0001:01:00.0: board_file api 1 bmi_id N/A crc32 402a8111 [ 29.961437] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1 [ 29.970642] ath10k_pci 0001:01:00.0: firmware register dump: [ 29.978306] ath10k_pci 0001:01:00.0: [00]: 0x00000009 0x000015B3 0x009AE104 0x00955B31 [ 29.983952] ath10k_pci 0001:01:00.0: [04]: 0x009AE104 0x00060330 0x00000005 0x00000006 [ 29.991674] ath10k_pci 0001:01:00.0: [08]: 0x000F6404 0x00955A00 0x00000000 0x0040679C [ 29.999572] ath10k_pci 0001:01:00.0: [12]: 0x00000009 0x00000000 0x00981D24 0x00981D4E [ 30.007563] ath10k_pci 0001:01:00.0: [16]: 0x00953438 0x009C2B13 0x009406B6 0x00000000 [ 30.015372] ath10k_pci 0001:01:00.0: [20]: 0x409AE104 0x004066CC 0x004067AC 0x00417D1C [ 30.023270] ath10k_pci 0001:01:00.0: [24]: 0x809A064F 0x0040672C 0x00000000 0xC09AE104 [ 30.031171] ath10k_pci 0001:01:00.0: [28]: 0x80981DA8 0x0040676C 0x000F6404 0x00421E5C [ 30.039069] ath10k_pci 0001:01:00.0: [32]: 0x80981E0A 0x0040678C 0x000F6404 0x00421E5C [ 30.046968] ath10k_pci 0001:01:00.0: [36]: 0x8099AE87 0x004067FC 0x00421E5C 0x00421E1C [ 30.054968] ath10k_pci 0001:01:00.0: [40]: 0x8099AE13 0x0040681C 0x004240C4 0x00443428 [ 30.062782] ath10k_pci 0001:01:00.0: [44]: 0x80943885 0x0040684C 0x00400000 0x00000002 [ 30.070671] ath10k_pci 0001:01:00.0: [48]: 0x80940E40 0x0040687C 0x0000001D 0x00000000 [ 30.078568] ath10k_pci 0001:01:00.0: [52]: 0x80940E13 0x004068AC 0x00400000 0x00000000 [ 30.086466] ath10k_pci 0001:01:00.0: [56]: 0x80940E5D 0x004068CC 0x00000000 0x00400600 [ 30.094365] ath10k_pci 0001:01:00.0: Copy Engine register dump: [ 30.102269] ath10k_pci 0001:01:00.0: [00]: 0x0004a000 14 14 3 3 [ 30.108083] ath10k_pci 0001:01:00.0: [01]: 0x0004a400 26 26 60 61 [ 30.114678] ath10k_pci 0001:01:00.0: [02]: 0x0004a800 6 6 5 6 [ 30.121102] ath10k_pci 0001:01:00.0: [03]: 0x0004ac00 0 0 2 0 [ 30.127528] ath10k_pci 0001:01:00.0: [04]: 0x0004b000 5 5 45 5 [ 30.133950] ath10k_pci 0001:01:00.0: [05]: 0x0004b400 9 9 8 9 [ 30.140373] ath10k_pci 0001:01:00.0: [06]: 0x0004b800 1 1 1 1 [ 30.146799] ath10k_pci 0001:01:00.0: [07]: 0x0004bc00 1 1 1 1 [ 30.153222] ath10k_pci 0001:01:00.0: [08]: 0x0004c000 0 0 127 0 [ 30.159644] ath10k_pci 0001:01:00.0: [09]: 0x0004c400 1 1 1 1 [ 30.166068] ath10k_pci 0001:01:00.0: [10]: 0x0004c800 0 0 0 0 [ 30.172492] ath10k_pci 0001:01:00.0: [11]: 0x0004cc00 0 0 0 0 [ 30.228821] ath10k_pci 0001:01:00.0: firmware crashed! (uuid 3cdf96b8-3957-4bf7-9851-6c5920fc5914) [ 30.228894] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002 [ 30.236772] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0 [ 30.251736] ath10k_pci 0001:01:00.0: firmware ver 10.4.3.00063 api 5 features no-p2p,peer-flow-ctrl crc32 a0d385ce [ 30.254287] ath10k_pci 0001:01:00.0: board_file api 1 bmi_id N/A crc32 402a8111 [ 30.264493] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1 [ 30.283716] ath10k_pci 0001:01:00.0: failed to get memcpy hi address for firmware address 4: -16 [ 30.283767] ath10k_pci 0001:01:00.0: failed to read firmware dump area: -16 [ 30.291678] ath10k_pci 0001:01:00.0: Copy Engine register dump: [ 30.298278] ath10k_pci 0001:01:00.0: [00]: 0x0004a000 0 0 0 0 [ 30.304257] ath10k_pci 0001:01:00.0: [01]: 0x0004a400 0 0 0 0 [ 30.310774] ath10k_pci 0001:01:00.0: [02]: 0x0004a800 0 0 0 0 [ 30.317281] ath10k_pci 0001:01:00.0: [03]: 0x0004ac00 0 0 0 0 [ 30.323685] ath10k_pci 0001:01:00.0: [04]: 0x0004b000 0 0 0 0 [ 30.330044] ath10k_pci 0001:01:00.0: [05]: 0x0004b400 0 0 0 0 [ 30.336526] ath10k_pci 0001:01:00.0: [06]: 0x0004b800 0 0 0 0 [ 30.342960] ath10k_pci 0001:01:00.0: [07]: 0x0004bc00 1 0 1 0 [ 30.349316] ath10k_pci 0001:01:00.0: [08]: 0x0004c000 0 0 0 0 [ 30.355800] ath10k_pci 0001:01:00.0: [09]: 0x0004c400 0 0 0 0 [ 30.362235] ath10k_pci 0001:01:00.0: [10]: 0x0004c800 0 0 0 0 [ 30.368585] ath10k_pci 0001:01:00.0: [11]: 0x0004cc00 0 0 0 0 [ 30.384502] ieee80211 phy1: Hardware restart was requested [ 31.645630] ath10k_pci 0001:01:00.0: device is wedged, will not restart [ 31.645732] ath10k_pci 0001:01:00.0: failed to create WMI vdev 0: -70 [ 31.651082] ath1: deauthenticating from c0:56:27:06:3a:00 by local choice (Reason: 3=DEAUTH_LEAVING) [ 31.658619] ath1: failed to remove key (0, c0:56:27:06:3a:00) from hardware (-5) [ 31.668287] ath1: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-5) [ 31.682038] ath10k_pci 0001:01:00.0: could not suspend target (-70) ### No activity on status pg --- click 'Apply Settings' on wireless page [ 241.034478] device vlan1 left promiscuous mode [ 241.034995] br0: port 1(vlan1) entered disabled state [ 241.044034] device vlan2 left promiscuous mode [ 241.044496] device eth0 left promiscuous mode [ 241.049560] br0: port 2(vlan2) entered disabled state [ 241.058471] device ath0 left promiscuous mode [ 241.058815] br0: port 3(ath0) entered disabled state [ 241.199433] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 1 [ 243.053944] device br0 entered promiscuous mode [ 243.128132] device vlan1 entered promiscuous mode [ 243.128165] device eth0 entered promiscuous mode [ 243.132110] br0: port 1(vlan1) entered forwarding state [ 243.136534] br0: port 1(vlan1) entered forwarding state [ 243.191098] device vlan2 entered promiscuous mode [ 243.191178] br0: port 2(vlan2) entered forwarding state [ 243.194883] br0: port 2(vlan2) entered forwarding state [ 243.206975] device br0 left promiscuous mode [ 243.210379] device br0 entered promiscuous mode [ 243.222013] device br0 left promiscuous mode [ 245.131355] br0: port 1(vlan1) entered forwarding state [ 245.194031] br0: port 2(vlan2) entered forwarding state [ 253.973444] device ath0 entered promiscuous mode [ 253.973646] br0: port 3(ath0) entered forwarding state [ 253.977148] br0: port 3(ath0) entered forwarding state [ 255.971441] br0: port 3(ath0) entered forwarding state [ 256.988188] ath1: authenticate with c0:56:27:06:3a:00 [ 257.302895] ath1: send auth to c0:56:27:06:3a:00 (try 1/3) [ 258.031480] ath1: send auth to c0:56:27:06:3a:00 (try 2/3) [ 259.031443] ath1: send auth to c0:56:27:06:3a:00 (try 3/3) [ 260.034341] ath1: authentication with c0:56:27:06:3a:00 timed out [ 260.081849] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 2 [ 261.601036] ath1: authenticate with c0:56:27:06:3a:00 [ 261.609326] ath1: send auth to c0:56:27:06:3a:00 (try 1/3) [ 263.031452] ath1: send auth to c0:56:27:06:3a:00 (try 2/3) [ 264.061460] ath1: send auth to c0:56:27:06:3a:00 (try 3/3) [ 265.061492] ath1: authentication with c0:56:27:06:3a:00 timed out [ 265.091941] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 3 [ 267.010348] ath1: authenticate with c0:56:27:06:3a:00 [ 267.017910] ath1: send auth to c0:56:27:06:3a:00 (try 1/3) [ 268.061474] ath1: send auth to c0:56:27:06:3a:00 (try 2/3) [ 269.043832] ath1: send auth to c0:56:27:06:3a:00 (try 3/3) [ 270.031213] ath1: authentication with c0:56:27:06:3a:00 timed out [ 270.071840] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 4 [ 272.490665] ath1: authenticate with c0:56:27:06:3a:00 [ 272.498450] ath1: send auth to c0:56:27:06:3a:00 (try 1/3) [ 273.031509] ath1: send auth to c0:56:27:06:3a:00 (try 2/3) [ 274.061476] ath1: send auth to c0:56:27:06:3a:00 (try 3/3) [ 275.061517] ath1: authentication with c0:56:27:06:3a:00 timed out [ 275.091896] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 5 [ 285.518030] ath1: authenticate with c0:56:27:06:3a:00 [ 285.525796] ath1: send auth to c0:56:27:06:3a:00 (try 1/3) [ 286.061497] ath1: send auth to c0:56:27:06:3a:00 (try 2/3) [ 287.040782] ath1: send auth to c0:56:27:06:3a:00 (try 3/3) [ 288.043811] ath1: authentication with c0:56:27:06:3a:00 timed out [ 288.071850] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 6 ### and this will go on & on .... root@DD-WRT:~# uptime 01:05:16 up 5 min, load average: 0.14, 0.24, 0.13 ----------------- Same tryin to do Client Bridge on ath1 -- no worky. ath0 works fine in Client Mode or Client Bridge.