## EA8500 DD-WRT v3.0-r30973 std (c) 2016 NewMedia-NET GmbH Release: 12/21/16 ========================================================== ___ ___ _ _____ ______ ____ ___ / _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \ / // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // / /____/____/ |__/|__/_/|_| /_/ |___/____(_)___/ DD-WRT v3.0 http://www.dd-wrt.com ========================================================== BusyBox v1.24.2 (2016-12-21 11:09:30 CET) built-in shell (ash) root@--:~# ps PID USER VSZ STAT COMMAND 1 root 1388 S /sbin/init 2 root 0 SW [kthreadd] 3 root 0 SW [ksoftirqd/0] 5 root 0 SW< [kworker/0:0H] 7 root 0 SW [rcu_preempt] 8 root 0 SW [rcu_sched] 9 root 0 SW [rcu_bh] 10 root 0 SW [migration/0] 11 root 0 SW [migration/1] 12 root 0 SW [ksoftirqd/1] 14 root 0 SW< [kworker/1:0H] 15 root 0 SW< [khelper] 16 root 0 SW< [writeback] 17 root 0 SW [kworker/0:1] 18 root 0 SW< [crypto] 19 root 0 SW< [bioset] 20 root 0 SW< [kblockd] 21 root 0 SW [kswapd0] 22 root 0 SW [fsnotify_mark] 31 root 0 SW [kworker/u4:1] 34 root 0 SW [kworker/1:1] 43 root 0 SW< [deferwq] 44 root 0 SW [kworker/0:2] 45 root 0 SW [kworker/1:2] 689 root 692 S /sbin/hotplug2 --set-rules-file /etc/hotplug2.rules --persistent 746 root 0 SW< [cfg80211] 757 root 0 SW< [ath10k_wq] 758 root 0 SW< [ath10k_aux_wq] 760 root 0 SW [kworker/u4:2] 762 root 0 SW< [ath10k_wq] 763 root 0 SW< [ath10k_aux_wq] 864 root 0 SW< [ata_sff] 869 root 0 SW [scsi_eh_0] 870 root 0 SW< [scsi_tmf_0] 871 root 0 SW [scsi_eh_1] 874 root 0 SW< [scsi_tmf_1] 875 root 0 SW [usb-storage] 1073 root 2816 S /usr/sbin/smbd -D --configfile=/tmp/smb.conf 1075 root 2604 S /usr/sbin/nmbd -D --configfile=/tmp/smb.conf 1095 root 2200 S hostapd -B -P /var/run/ath0_hostapd.pid /tmp/ath0_hostap.conf 1119 root 2200 S hostapd -B -P /var/run/ath1_hostapd.pid /tmp/ath1_hostap.conf 1202 root 0 SW< [kworker/1:1H] 1205 root 1072 S telnetd 1223 root 0 SW< [kworker/0:1H] 1238 root 788 S dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_rsa_key -p xxxxx -s 1259 root 840 S dnsmasq -u root -g root --conf-file=/tmp/dnsmasq.conf --cache-size=1500 1559 root 1792 S ttraff 1632 root 1072 S syslogd -L 1636 root 1072 S klogd 1669 root 1584 S resetbutton 1938 root 3976 S httpd -p 80 2234 root 1584 S process_monitor 3156 root 1072 S udhcpc -i vlan2 -p /var/run/udhcpc.pid -s /tmp/udhcpc -O routes -O msstaticroutes -O staticroutes 3169 root 668 S cron 3178 root 7084 S unbound -c /tmp/unbound.conf 3784 root 1536 S wland 6271 root 0 SW [kworker/0:0] 6452 root 860 R dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_rsa_key -p xxxxx -s 6453 root 1076 S -sh 6455 root 1072 R ps root@--:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.18.45 (root@seg-desktop) (gcc version 6.1.0 (LEDE GCC 6.1.0 r1009) ) #116 SMP PREEMPT Tue Dec 20 13:44:06 CET 2016 [ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Linksys EA8500 WiFi Router [ 0.000000] Ignoring memory range 0x41500000 - 0x42000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 122880 [ 0.000000] free_area_init_node: node 0, pgdat c071e800, node_mem_map ddb40000 [ 0.000000] Normal zone: 960 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 122880 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 9 pages/cpu @ddfd3000 s7552 r8192 d21120 u36864 [ 0.000000] pcpu-alloc: s7552 r8192 d21120 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920 [ 0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:16 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 481228K/491520K available (3854K kernel code, 279K rwdata, 1104K rodata, 184K init, 403K bss, 10292K reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xde800000 - 0xff000000 ( 520 MB) [ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc06dfe1c (4960 kB) [ 0.000000] .init : 0xc06e0000 - 0xc070e000 ( 184 kB) [ 0.000000] .data : 0xc070e000 - 0xc0753e04 ( 280 kB) [ 0.000000] .bss : 0xc0753e04 - 0xc07b8b84 ( 404 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000012] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 687194767200ns [ 0.000027] Switching to timer-based delay loop, resolution 160ns [ 0.000429] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500) [ 0.000452] pid_max: default: 32768 minimum: 301 [ 0.000693] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000709] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001354] CPU: Testing write buffer coherency: ok [ 0.001618] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002104] Setting up static identity map for 0x42213180 - 0x422131d8 [ 0.063465] CPU1: Booted secondary processor [ 0.063568] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.063687] Brought up 2 CPUs [ 0.063713] SMP: Total of 2 processors activated (25.00 BogoMIPS). [ 0.063724] CPU: All CPU(s) started in SVC mode. [ 0.078505] VFP support v0.3: implementor 51 architecture 0 part 4d variant 2 rev 0 [ 0.079040] pinctrl core: initialized pinctrl subsystem [ 0.089434] NET: Registered protocol family 16 [ 0.089757] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.113883] cpuidle: using governor ladder [ 0.144900] cpuidle: using governor menu [ 0.163956] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342 [ 0.164041] qcom_rpm 108000.rpm: failed to mark ack irq as wakeup [ 0.164099] qcom_rpm 108000.rpm: failed to mark wakeup irq as wakeup [ 0.199523] pps_core: LinuxPPS API ver. 1 registered [ 0.199536] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.199577] PTP clock support registered [ 0.200718] pcie_init: pcie_init: unable to create IPC log context for pcie0-short [ 0.200732] pcie_init: pcie_init: unable to create IPC log context for pcie0-long [ 0.200743] pcie_init: pcie_init: unable to create IPC log context for pcie1-short [ 0.200754] pcie_init: pcie_init: unable to create IPC log context for pcie1-long [ 0.201162] Switched to clocksource dg_timer [ 0.202583] NET: Registered protocol family 2 [ 0.203288] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.203326] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.203378] TCP: Hash tables configured (established 4096 bind 4096) [ 0.203420] TCP: reno registered [ 0.203440] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.203461] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.203696] NET: Registered protocol family 1 [ 0.203768] PCI: CLS 0 bytes, default 64 [ 0.204899] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.204993] Crashlog allocated RAM at address 0x5ff00000 [ 0.205865] squashfs: version 3.0 (2006/03/15) Phillip Lougher [ 0.205904] msgmni has been set to 939 [ 0.208234] io scheduler noop registered [ 0.208259] io scheduler deadline registered (default) [ 0.209617] 1b500000.pci supply vdda not found, using dummy regulator [ 0.209707] 1b500000.pci supply vdda_phy not found, using dummy regulator [ 0.209784] 1b500000.pci supply vdda_refclk not found, using dummy regulator [ 0.240796] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00 [ 0.240820] pci_bus 0000:00: root bus resource [io 0xfe00000-0xfffff] (bus address [0x1fc00000-0xfefffff]) [ 0.240836] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff] [ 0.240853] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.240901] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400 [ 0.241040] pci 0000:00:00.0: supports D1 [ 0.241055] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 0.241448] PCI: bus0: Fast back to back transfers disabled [ 0.241790] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000 [ 0.241993] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 0.242937] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.243363] PCI: bus1: Fast back to back transfers disabled [ 0.243382] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.243535] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff] [ 0.243559] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit] [ 0.243671] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.243692] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff] [ 0.244139] aer 0000:00:00.0:pcie02: service driver aer loaded [ 0.244488] 1b700000.pci supply vdda not found, using dummy regulator [ 0.244570] 1b700000.pci supply vdda_phy not found, using dummy regulator [ 0.244661] 1b700000.pci supply vdda_refclk not found, using dummy regulator [ 0.274883] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00 [ 0.274903] pci_bus 0001:00: root bus resource [io 0x31e10000-0xfffff] (bus address [0x63c00000-0x31eeffff]) [ 0.274918] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff] [ 0.274934] pci_bus 0001:00: root bus resource [bus 00-ff] [ 0.274978] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400 [ 0.275095] pci 0001:00:00.0: supports D1 [ 0.275109] pci 0001:00:00.0: PME# supported from D0 D1 D3hot [ 0.275421] PCI: bus0: Fast back to back transfers disabled [ 0.275751] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000 [ 0.275951] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 0.276888] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold [ 0.277305] PCI: bus1: Fast back to back transfers disabled [ 0.277323] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.277541] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff] [ 0.277563] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit] [ 0.277670] pci 0001:00:00.0: PCI bridge to [bus 01] [ 0.277688] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff] [ 0.278078] aer 0001:00:00.0:pcie02: service driver aer loaded [ 0.278408] 1b900000.pci supply vdda not found, using dummy regulator [ 0.278489] 1b900000.pci supply vdda_phy not found, using dummy regulator [ 0.278566] 1b900000.pci supply vdda_refclk not found, using dummy regulator [ 0.413372] qcom-pcie 1b900000.pci: link initialization failed [ 0.415477] qcom-pcie 1b900000.pci: PCI host bridge to bus 0002:00 [ 0.415497] pci_bus 0002:00: root bus resource [io 0x35e20000-0xfffff] (bus address [0x6bc00000-0x35edffff]) [ 0.415512] pci_bus 0002:00: root bus resource [mem 0x32000000-0x35dfffff] [ 0.415534] pci_bus 0002:00: root bus resource [bus 00-ff] [ 0.415584] PCI: bus0: Fast back to back transfers enabled [ 0.418100] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0 [ 0.419414] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.420394] msm_serial 16340000.serial: msm_serial: detected port #0 [ 0.420488] msm_serial 16340000.serial: uartclk = 1843200 [ 0.420543] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 184, base_baud = 115200) is a MSM [ 0.420598] msm_serial: console setup on port #0 [ 1.132633] console [ttyMSM0] enabled [ 1.137420] msm_serial: driver initialized [ 1.144175] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1 [ 1.144697] nand: AMD/Spansion S34MS01G2 [ 1.151206] nand: 128MiB, SLC, page size: 2048, OOB size: 64 [ 1.155199] Scanning device for bad blocks [ 1.600700] random: nonblocking pool is initialized [ 1.928020] 19 ofpart partitions found on MTD device qcom-nandc [ 1.928048] Creating 19 MTD partitions on "qcom-nandc": [ 1.932835] 0x000000000000-0x000000040000 : "SBL1" [ 1.938848] 0x000000040000-0x000000180000 : "MIBIB" [ 1.943666] 0x000000180000-0x0000002c0000 : "SBL2" [ 1.948340] 0x0000002c0000-0x000000540000 : "SBL3" [ 1.953281] 0x000000540000-0x000000660000 : "DDRCONFIG" [ 1.957996] 0x000000660000-0x000000780000 : "SSD" [ 1.963167] 0x000000780000-0x000000a00000 : "TZ" [ 1.967978] 0x000000a00000-0x000000c80000 : "RPM" [ 1.972760] 0x000000c80000-0x000000dc0000 : "art" [ 1.977255] 0x000000dc0000-0x000000ec0000 : "APPSBL" [ 1.982032] 0x000000ec0000-0x000000f00000 : "u_env" [ 1.987012] 0x000000f00000-0x000000f40000 : "s_env" [ 1.991677] 0x000000f40000-0x000000f80000 : "devinfo" [ 1.996446] 0x000000f80000-0x000003780000 : "linux" [ 2.001763] 0x000001280000-0x000003780000 : "rootfs" [ 2.006396] mtd: partition "rootfs" set to be root filesystem [ 2.010786] 0x000003780000-0x000005f40000 : "linux2" [ 2.017304] 0x000003a80000-0x000005f40000 : "rootfs2" [ 2.022338] 0x000005f40000-0x000005f80000 : "nvram" [ 2.027178] 0x000005f80000-0x000008000000 : "ddwrt" [ 2.033218] IMQ: autocreate imq0 NS c074e0c0 [ 2.036501] IMQ: autocreate imq1 NS c074e0c0 [ 2.040474] IMQ driver loaded successfully. (numdevs = 16, numqueues = 1) [ 2.044874] Hooking IMQ after NAT on PREROUTING. [ 2.051695] Hooking IMQ before NAT on POSTROUTING. [ 2.056579] libphy: Fixed MDIO Bus: probed [ 2.061371] libphy: GPIO Bitbanged MDIO: probed [ 2.086385] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0 [ 2.854383] tun: Universal TUN/TAP device driver, 1.6 [ 2.854408] tun: (C) 1999-2004 Max Krasnyansky [ 2.859856] stmmac - user ID: 0x10, Synopsys ID: 0x37 [ 2.864595] Ring mode enabled [ 2.869602] DMA HW capability register supported [ 2.872643] Enhanced/Alternate descriptors [ 2.877327] Enabled extended descriptors [ 2.881323] RX Checksum Offload Engine supported (type 2) [ 2.885574] TX Checksum insertion supported [ 2.890869] Wake-Up On Lan supported [ 2.895432] Enable RX Mitigation via HW Watchdog Timer [ 2.900096] stmmac - user ID: 0x10, Synopsys ID: 0x37 [ 2.903978] Ring mode enabled [ 2.909097] DMA HW capability register supported [ 2.912128] Enhanced/Alternate descriptors [ 2.916824] Enabled extended descriptors [ 2.920818] RX Checksum Offload Engine supported (type 2) [ 2.925062] TX Checksum insertion supported [ 2.930367] Wake-Up On Lan supported [ 2.934952] Enable RX Mitigation via HW Watchdog Timer [ 2.939040] PPP generic driver version 2.4.2 [ 2.943603] PPP BSD Compression module registered [ 2.947920] PPP Deflate Compression module registered [ 2.952605] PPP MPPE Compression module registered [ 2.957555] NET: Registered protocol family 24 [ 2.962339] PPTP driver version 0.8.5 [ 2.966786] i2c /dev entries driver [ 2.975899] Speed bin: 0 [ 2.975922] PVS bin: 1 [ 2.977901] platform cpufreq-krait.0: Driver cpufreq-krait requests probe deferral [ 2.981705] L2 @ QSB rate. Forcing new rate. [ 2.987448] L2 @ 387500 KHz [ 2.991856] CPU0 @ 800000 KHz [ 2.994159] CPU1 @ QSB rate. Forcing new rate. [ 2.997368] CPU1 @ 384000 KHz [ 3.002012] GACT probability NOT on [ 3.004682] Mirror/redirect action on [ 3.008013] Simple TC action Loaded [ 3.012691] netem: version 1.3 [ 3.015125] u32 classifier [ 3.018203] Performance counters on [ 3.020895] input device check on [ 3.024725] Actions configured [ 3.028489] Netfilter messages via NETLINK v0.30. [ 3.031875] nf_conntrack version 0.5.0 (7519 buckets, 30076 max) [ 3.036853] nf_conntrack_rtsp v0.7 loading [ 3.043188] xt_time: kernel timezone is -0000 [ 3.046532] ip_set: protocol 6 [ 3.051211] gre: GRE over IPv4 demultiplexor driver [ 3.054301] nf_nat_rtsp v0.7 loading [ 3.058701] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.062814] TCP: bic registered [ 3.067782] TCP: cubic registered [ 3.070646] TCP: westwood registered [ 3.074215] TCP: highspeed registered [ 3.077764] TCP: hybla registered [ 3.081322] TCP: htcp registered [ 3.084710] TCP: vegas registered [ 3.087923] TCP: veno registered [ 3.091132] TCP: scalable registered [ 3.094520] TCP: lp registered [ 3.097989] TCP: yeah registered [ 3.100854] TCP: illinois registered [ 3.104343] NET: Registered protocol family 17 [ 3.107871] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 3.112174] Bridge firewalling registered [ 3.124886] 8021q: 802.1Q VLAN Support v1.8 [ 3.128845] Registering SWP/SWPB emulation handler [ 3.136669] trying to register driver generic_krait [ 3.137581] Frequency table not initialized. [ 3.142560] Frequency table not initialized. [ 3.146886] Frequency table not initialized. [ 3.151107] Frequency table not initialized. [ 3.155429] Frequency table not initialized. [ 3.161146] Frequency table not initialized. [ 3.163985] Frequency table not initialized. [ 3.168133] Frequency table not initialized. [ 3.172448] Frequency table not initialized. [ 3.176624] Frequency table not initialized. [ 3.180892] driver generic_krait up and running [ 3.185238] searching for nvram [ 3.189407] nvram size = -1066983986 [ 3.213338] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 3.220939] UBIFS error (pid 1): ubifs_mount: cannot open "ubi0:rootfs", error -19 [ 3.223713] VFS: Mounted root (squashfs filesystem) readonly on device 31:16. [ 3.227564] Freeing unused kernel memory: 184K (c06e0000 - c070e000) [ 5.571194] UBIFS error (pid 710): ubifs_mount: cannot open "ubi0:rootfs_data", error -19 [ 6.748528] Loading modules backported from Linux version wt-2016-10-03-1-g6fcb1a6 [ 6.748559] Backport generated by backports.git backports-20160324-9-g0e38f5c [ 7.205292] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142) [ 7.205877] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 7.333531] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2 [ 7.333571] ath10k_pci 0000:01:00.0: Falling back to user helper [ 7.642189] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002 [ 7.642228] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0 [ 7.652355] ath10k_pci 0000:01:00.0: firmware ver 10.4.3.00063 api 5 features no-p2p,peer-flow-ctrl crc32 a0d385ce [ 7.661624] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002 from ath10k/QCA99X0/hw2.0/board-2.bin [ 7.683699] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 62700264 [ 8.584212] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 8.681552] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off [ 8.859802] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1 [ 8.926110] ath: EEPROM regdomain: 0x0 [ 8.926122] ath: EEPROM indicates default country code should be used [ 8.926130] ath: doing EEPROM country->regdmn map search [ 8.926144] ath: country maps to regdmn code: 0x3a [ 8.926154] ath: Country alpha2 being used: US [ 8.926162] ath: Regpair used: 0x3a [ 8.933166] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142) [ 8.933734] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 9.072770] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0001:01:00.0.bin failed with error -2 [ 9.072812] ath10k_pci 0001:01:00.0: Falling back to user helper [ 9.085595] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002 [ 9.088544] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0 [ 9.103205] ath10k_pci 0001:01:00.0: firmware ver 10.4.3.00063 api 5 features no-p2p,peer-flow-ctrl crc32 a0d385ce [ 9.106372] ath10k_pci 0001:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002 from ath10k/QCA99X0/hw2.0/board-2.bin [ 9.116450] ath10k_pci 0001:01:00.0: board_file api 1 bmi_id N/A crc32 62700264 [ 10.307949] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1 [ 10.379973] ath: EEPROM regdomain: 0x0 [ 10.379999] ath: EEPROM indicates default country code should be used [ 10.380017] ath: doing EEPROM country->regdmn map search [ 10.380042] ath: country maps to regdmn code: 0x3a [ 10.380062] ath: Country alpha2 being used: US [ 10.380079] ath: Regpair used: 0x3a [ 10.582036] usbcore: registered new interface driver usbfs [ 10.582572] usbcore: registered new interface driver hub [ 10.586694] usbcore: registered new device driver usb [ 10.632370] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 10.641044] ehci-platform: EHCI generic platform driver [ 10.660119] ehci-pci: EHCI PCI platform driver [ 10.708591] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 10.991223] soc:usb30@0 supply gdsc not found, using dummy regulator [ 10.993286] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 10.997005] soc:usb30@1 supply gdsc not found, using dummy regulator [ 10.997072] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 11.011580] platform 10000000.dwc3: Driver dwc3 requests probe deferral [ 11.016388] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 11.023114] platform 10000000.dwc3: Driver dwc3 requests probe deferral [ 11.060600] 100f8800.phy supply vddcx not found, using dummy regulator [ 11.060676] 100f8800.phy supply v3p3 not found, using dummy regulator [ 11.066139] 100f8800.phy supply v1p8 not found, using dummy regulator [ 11.072649] 100f8800.phy supply vbus not found, using dummy regulator [ 11.079077] 110f8800.phy supply vddcx not found, using dummy regulator [ 11.079297] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 11.079515] platform 10000000.dwc3: Driver dwc3 requests probe deferral [ 11.098353] 110f8800.phy supply v3p3 not found, using dummy regulator [ 11.105017] 110f8800.phy supply v1p8 not found, using dummy regulator [ 11.111600] 110f8800.phy supply vbus not found, using dummy regulator [ 11.118197] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 11.130267] 100f8830.phy supply vddcx not found, using dummy regulator [ 11.130829] 100f8830.phy supply v1p8 not found, using dummy regulator [ 11.131760] platform 10000000.dwc3: Driver dwc3 requests probe deferral [ 11.144006] qcom-dwc3-ssphy 100f8830.phy: cannot get HSIO settings from device node, using default values [ 11.150364] 110f8830.phy supply vddcx not found, using dummy regulator [ 11.150543] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 11.150844] qcom-dwc3-hsphy 100f8800.phy: cannot set voltage for vddcx [ 11.150854] qcom-dwc3-hsphy 100f8800.phy: cannot set voltage for v3p3 [ 11.150863] qcom-dwc3-hsphy 100f8800.phy: cannot set voltage for v1p8 [ 11.153278] qcom-dwc3-ssphy 100f8830.phy: cannot set voltage for vddcx [ 11.192618] 110f8830.phy supply v1p8 not found, using dummy regulator [ 11.198975] qcom-dwc3-ssphy 110f8830.phy: cannot get HSIO settings from device node, using default values [ 11.422552] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 11.422627] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 11.427169] xhci-hcd xhci-hcd.0.auto: irq 237, io mem 0x10000000 [ 11.435688] hub 1-0:1.0: USB hub found [ 11.440952] hub 1-0:1.0: 1 port detected [ 11.445019] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 11.448383] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 11.456212] hub 2-0:1.0: USB hub found [ 11.462134] hub 2-0:1.0: 1 port detected [ 11.465958] qcom-dwc3-hsphy 110f8800.phy: cannot set voltage for vddcx [ 11.469117] qcom-dwc3-hsphy 110f8800.phy: cannot set voltage for v3p3 [ 11.475915] qcom-dwc3-hsphy 110f8800.phy: cannot set voltage for v1p8 [ 11.484611] qcom-dwc3-ssphy 110f8830.phy: cannot set voltage for vddcx [ 11.722718] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 11.722776] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 11.727273] xhci-hcd xhci-hcd.1.auto: irq 142, io mem 0x11000000 [ 11.736221] hub 3-0:1.0: USB hub found [ 11.741110] hub 3-0:1.0: 1 port detected [ 11.744963] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 11.748550] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 11.756072] hub 4-0:1.0: USB hub found [ 11.765959] hub 4-0:1.0: 1 port detected [ 12.061571] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 16.222735] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 16.222814] usb usb4: USB disconnect, device number 1 [ 16.230435] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered [ 16.231999] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 16.237578] usb usb3: USB disconnect, device number 1 [ 16.253320] usb 3-1: USB disconnect, device number 2 [ 16.256838] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered [ 16.257404] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 16.271406] usb usb2: USB disconnect, device number 1 [ 16.272749] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 16.275529] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 16.281246] usb usb1: USB disconnect, device number 1 [ 16.287708] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 16.301807] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 16.301895] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 16.306361] xhci-hcd xhci-hcd.0.auto: irq 237, io mem 0x10000000 [ 16.314659] hub 1-0:1.0: USB hub found [ 16.320020] hub 1-0:1.0: 1 port detected [ 16.324098] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 16.327646] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 16.333890] hub 2-0:1.0: USB hub found [ 16.340506] hub 2-0:1.0: 1 port detected [ 16.344935] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 16.348399] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 16.353978] xhci-hcd xhci-hcd.1.auto: irq 142, io mem 0x11000000 [ 16.362207] hub 3-0:1.0: USB hub found [ 16.367536] hub 3-0:1.0: 1 port detected [ 16.371429] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 16.375187] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 16.381209] hub 4-0:1.0: USB hub found [ 16.388036] hub 4-0:1.0: 1 port detected [ 16.423701] SCSI subsystem initialized [ 16.505131] usbcore: registered new interface driver usb-storage [ 16.574332] libata version 3.00 loaded. [ 16.662230] ahci 29000000.sata: forcing port_map 0x0 -> 0x1 [ 16.662293] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 16.666616] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst [ 16.676392] scsi host0: ahci_platform [ 16.683522] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 16.687923] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 241 [ 16.825757] usb-storage 3-1:1.0: USB Mass Storage device detected [ 16.833543] scsi host1: usb-storage 3-1:1.0 [ 17.041563] ata1: SATA link down (SStatus 0 SControl 300) [ 17.832584] scsi 1:0:0:0: Direct-Access PNY USB 2.0 FD 0.00 PQ: 0 ANSI: 2 [ 17.836343] sd 1:0:0:0: [sda] 31711232 512-byte logical blocks: (16.2 GB/15.1 GiB) [ 17.840286] sd 1:0:0:0: [sda] Write Protect is off [ 17.847283] sd 1:0:0:0: [sda] Mode Sense: 00 00 00 00 [ 17.847709] sd 1:0:0:0: [sda] Asking for cache data failed [ 17.852110] sd 1:0:0:0: [sda] Assuming drive cache: write through [ 17.861583] sda: sda1 [ 17.876295] sd 1:0:0:0: [sda] Attached SCSI removable disk [ 18.107131] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 18.115359] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 19.004256] device br0 entered promiscuous mode [ 19.070559] device vlan1 entered promiscuous mode [ 19.070584] device eth0 entered promiscuous mode [ 19.074349] br0: port 1(vlan1) entered forwarding state [ 19.078947] br0: port 1(vlan1) entered forwarding state [ 19.091070] device br0 left promiscuous mode [ 19.094438] device br0 entered promiscuous mode [ 19.158855] device br0 left promiscuous mode [ 21.071579] br0: port 1(vlan1) entered forwarding state [ 24.932733] device ath0 entered promiscuous mode [ 27.115966] br0: port 2(ath0) entered forwarding state [ 27.116044] br0: port 2(ath0) entered forwarding state [ 28.755197] device ath1 entered promiscuous mode [ 29.111533] br0: port 2(ath0) entered forwarding state [ 30.606899] br0: port 3(ath1) entered forwarding state [ 30.607003] br0: port 3(ath1) entered forwarding state [ 31.081729] device vlan2 entered promiscuous mode [ 31.934035] device vlan2 left promiscuous mode [ 32.601374] br0: port 3(ath1) entered forwarding state root@--:~# uptime 18:04:32 up 13 min, load average: 0.01, 0.09, 0.09