### EA8500 dd-wrt BS_30082 da-box:~ mrjcd$ telnet 192.168.1.1 Trying 192.168.1.1... telnet: connect to address 192.168.1.1: No route to host telnet: Unable to connect to remote host da-box:~ mrjcd$ telnet 192.168.1.1 Trying 192.168.1.1... Connected to homeworld. Escape character is '^]'. DD-WRT v3.0-r30082 std (c) 2016 NewMedia-NET GmbH Release: 07/01/16 HOMEWORLD login: root Password: ========================================================== ___ ___ _ _____ ______ ____ ___ / _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \ / // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // / /____/____/ |__/|__/_/|_| /_/ |___/____(_)___/ DD-WRT v3.0 http://www.dd-wrt.com ========================================================== BusyBox v1.24.2 (2016-07-01 02:02:53 CEST) built-in shell (ash) root@HOMEWORLD:~# free total used free shared buffers cached Mem: 481456 75184 406272 0 5800 13308 -/+ buffers/cache: 56076 425380 Swap: 0 0 0 root@HOMEWORLD:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.18.36 (root@seg-desktop) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 r47665) ) #81 SMP PREEMPT Sun Jun 26 02:51:26 CEST 2016 [ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Linksys EA8500 WiFi Router [ 0.000000] Ignoring memory range 0x41500000 - 0x42000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 122880 [ 0.000000] free_area_init_node: node 0, pgdat c0716840, node_mem_map ddc39000 [ 0.000000] Normal zone: 960 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 122880 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 9 pages/cpu @ddc13000 s7552 r8192 d21120 u36864 [ 0.000000] pcpu-alloc: s7552 r8192 d21120 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920 [ 0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:14 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 481272K/491520K available (3822K kernel code, 282K rwdata, 1104K rodata, 184K init, 404K bss, 10248K reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xde800000 - 0xff000000 ( 520 MB) [ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc06d7e4c (4928 kB) [ 0.000000] .init : 0xc06d8000 - 0xc0706000 ( 184 kB) [ 0.000000] .data : 0xc0706000 - 0xc074ca44 ( 283 kB) [ 0.000000] .bss : 0xc074ca44 - 0xc07b1bc4 ( 405 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000011] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 687194767200ns [ 0.000026] Switching to timer-based delay loop, resolution 160ns [ 0.000437] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500) [ 0.000462] pid_max: default: 32768 minimum: 301 [ 0.000711] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000729] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001383] CPU: Testing write buffer coherency: ok [ 0.001646] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002155] Setting up static identity map for 0x422131d8 - 0x42213230 [ 0.063431] CPU1: Booted secondary processor [ 0.063536] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.063652] Brought up 2 CPUs [ 0.063675] SMP: Total of 2 processors activated (25.00 BogoMIPS). [ 0.063686] CPU: All CPU(s) started in SVC mode. [ 0.078734] VFP support v0.3: implementor 51 architecture 0 part 4d variant 2 rev 0 [ 0.079278] pinctrl core: initialized pinctrl subsystem [ 0.079717] regulator-dummy: no parameters [ 0.089796] NET: Registered protocol family 16 [ 0.090123] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.113851] cpuidle: using governor ladder [ 0.144865] cpuidle: using governor menu [ 0.164540] qcom_rpm 108000.rpm: RPM firmware 1.0.126 [ 0.164605] qcom_rpm 108000.rpm: failed to mark ack irq as wakeup [ 0.164662] qcom_rpm 108000.rpm: failed to mark wakeup irq as wakeup [ 0.208947] smb208-s1a: 1050 <--> 1150 mV [ 0.209272] smb208-s1b: 1050 <--> 1150 mV [ 0.209582] smb208-s2a: 800 <--> 1250 mV [ 0.209907] smb208-s2b: 800 <--> 1250 mV [ 0.210400] pps_core: LinuxPPS API ver. 1 registered [ 0.210412] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.210452] PTP clock support registered [ 0.211602] pcie_init: pcie_init: unable to create IPC log context for pcie0-short [ 0.211619] pcie_init: pcie_init: unable to create IPC log context for pcie0-long [ 0.211629] pcie_init: pcie_init: unable to create IPC log context for pcie1-short [ 0.211638] pcie_init: pcie_init: unable to create IPC log context for pcie1-long [ 0.212047] Switched to clocksource dg_timer [ 0.213491] NET: Registered protocol family 2 [ 0.214171] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.214207] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.214260] TCP: Hash tables configured (established 4096 bind 4096) [ 0.214307] TCP: reno registered [ 0.214327] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.214349] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.214592] NET: Registered protocol family 1 [ 0.214654] PCI: CLS 0 bytes, default 64 [ 0.215780] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.216758] squashfs: version 3.0 (2006/03/15) Phillip Lougher [ 0.216799] msgmni has been set to 939 [ 0.219365] io scheduler noop registered [ 0.219388] io scheduler deadline registered (default) [ 0.220812] 1b500000.pci supply vdda not found, using dummy regulator [ 0.220891] 1b500000.pci supply vdda_phy not found, using dummy regulator [ 0.220962] 1b500000.pci supply vdda_refclk not found, using dummy regulator [ 0.250861] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00 [ 0.250884] pci_bus 0000:00: root bus resource [io 0xfe00000-0xfffff] (bus address [0x1fc00000-0xfefffff]) [ 0.250902] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff] [ 0.250921] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.250971] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400 [ 0.251119] pci 0000:00:00.0: supports D1 [ 0.251134] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 0.251462] PCI: bus0: Fast back to back transfers disabled [ 0.251811] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000 [ 0.252013] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 0.253060] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.253504] PCI: bus1: Fast back to back transfers disabled [ 0.253524] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.253675] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff] [ 0.253698] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit] [ 0.253809] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.253829] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff] [ 0.254269] aer 0000:00:00.0:pcie02: service driver aer loaded [ 0.254614] 1b700000.pci supply vdda not found, using dummy regulator [ 0.254698] 1b700000.pci supply vdda_phy not found, using dummy regulator [ 0.254776] 1b700000.pci supply vdda_refclk not found, using dummy regulator [ 0.284243] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00 [ 0.284262] pci_bus 0001:00: root bus resource [io 0x31e10000-0xfffff] (bus address [0x63c00000-0x31eeffff]) [ 0.284277] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff] [ 0.284300] pci_bus 0001:00: root bus resource [bus 00-ff] [ 0.284344] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400 [ 0.284464] pci 0001:00:00.0: supports D1 [ 0.284477] pci 0001:00:00.0: PME# supported from D0 D1 D3hot [ 0.284787] PCI: bus0: Fast back to back transfers disabled [ 0.285128] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000 [ 0.285324] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 0.286263] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold [ 0.286693] PCI: bus1: Fast back to back transfers disabled [ 0.286711] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.286928] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff] [ 0.286948] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit] [ 0.287054] pci 0001:00:00.0: PCI bridge to [bus 01] [ 0.287072] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff] [ 0.287461] aer 0001:00:00.0:pcie02: service driver aer loaded [ 0.287801] 1b900000.pci supply vdda not found, using dummy regulator [ 0.287879] 1b900000.pci supply vdda_phy not found, using dummy regulator [ 0.287950] 1b900000.pci supply vdda_refclk not found, using dummy regulator [ 0.419588] qcom-pcie 1b900000.pci: link initialization failed [ 0.421702] qcom-pcie 1b900000.pci: PCI host bridge to bus 0002:00 [ 0.421721] pci_bus 0002:00: root bus resource [io 0x35e20000-0xfffff] (bus address [0x6bc00000-0x35edffff]) [ 0.421737] pci_bus 0002:00: root bus resource [mem 0x32000000-0x35dfffff] [ 0.421753] pci_bus 0002:00: root bus resource [bus 00-ff] [ 0.421804] PCI: bus0: Fast back to back transfers enabled [ 0.424513] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0 [ 0.425859] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.426891] msm_serial 16340000.serial: msm_serial: detected port #0 [ 0.426990] msm_serial 16340000.serial: uartclk = 1843200 [ 0.427047] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 184, base_baud = 115200) is a MSM [ 0.427103] msm_serial: console setup on port #0 [ 1.153999] console [ttyMSM0] enabled [ 1.158779] msm_serial: driver initialized [ 1.165603] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1 [ 1.166045] nand: AMD/Spansion S34MS01G2 [ 1.172626] nand: 128MiB, SLC, page size: 2048, OOB size: 64 [ 1.176467] Scanning device for bad blocks [ 1.587889] random: nonblocking pool is initialized [ 1.890814] 19 ofpart partitions found on MTD device qcom-nandc [ 1.890843] Creating 19 MTD partitions on "qcom-nandc": [ 1.895628] 0x000000000000-0x000000040000 : "SBL1" [ 1.901669] 0x000000040000-0x000000180000 : "MIBIB" [ 1.906459] 0x000000180000-0x0000002c0000 : "SBL2" [ 1.911174] 0x0000002c0000-0x000000540000 : "SBL3" [ 1.916110] 0x000000540000-0x000000660000 : "DDRCONFIG" [ 1.920819] 0x000000660000-0x000000780000 : "SSD" [ 1.925985] 0x000000780000-0x000000a00000 : "TZ" [ 1.930799] 0x000000a00000-0x000000c80000 : "RPM" [ 1.935564] 0x000000c80000-0x000000dc0000 : "art" [ 1.940103] 0x000000dc0000-0x000000ec0000 : "APPSBL" [ 1.944845] 0x000000ec0000-0x000000f00000 : "u_env" [ 1.949838] 0x000000f00000-0x000000f40000 : "s_env" [ 1.954512] 0x000000f40000-0x000000f80000 : "devinfo" [ 1.959253] 0x000000f80000-0x000003780000 : "linux" [ 1.964592] 0x000001280000-0x000003780000 : "rootfs" [ 1.969220] mtd: partition "rootfs" set to be root filesystem [ 1.973657] 0x000003780000-0x000005f40000 : "linux2" [ 1.980071] 0x000003a80000-0x000005f40000 : "rootfs2" [ 1.985189] 0x000005f40000-0x000005f80000 : "nvram" [ 1.990010] 0x000005f80000-0x000008000000 : "ddwrt" [ 1.996105] IMQ: autocreate imq0 NS c0746d00 [ 1.999306] IMQ: autocreate imq1 NS c0746d00 [ 2.003364] IMQ driver loaded successfully. (numdevs = 16, numqueues = 1) [ 2.007601] Hooking IMQ after NAT on PREROUTING. [ 2.014444] Hooking IMQ before NAT on POSTROUTING. [ 2.019379] libphy: Fixed MDIO Bus: probed [ 2.024251] libphy: GPIO Bitbanged MDIO: probed [ 2.048889] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0 [ 2.261857] tun: Universal TUN/TAP device driver, 1.6 [ 2.261881] tun: (C) 1999-2004 Max Krasnyansky [ 2.267462] stmmac - user ID: 0x10, Synopsys ID: 0x37 [ 2.271957] Ring mode enabled [ 2.277191] DMA HW capability register supported [ 2.280031] Enhanced/Alternate descriptors [ 2.284803] Enabled extended descriptors [ 2.288797] RX Checksum Offload Engine supported (type 2) [ 2.293045] TX Checksum insertion supported [ 2.298345] Wake-Up On Lan supported [ 2.302935] Enable RX Mitigation via HW Watchdog Timer [ 2.307602] stmmac - user ID: 0x10, Synopsys ID: 0x37 [ 2.311367] Ring mode enabled [ 2.316677] DMA HW capability register supported [ 2.319525] Enhanced/Alternate descriptors [ 2.324299] Enabled extended descriptors [ 2.328292] RX Checksum Offload Engine supported (type 2) [ 2.332531] TX Checksum insertion supported [ 2.337840] Wake-Up On Lan supported [ 2.342327] Enable RX Mitigation via HW Watchdog Timer [ 2.346632] PPP generic driver version 2.4.2 [ 2.351012] PPP BSD Compression module registered [ 2.355473] PPP Deflate Compression module registered [ 2.360000] PPP MPPE Compression module registered [ 2.365105] NET: Registered protocol family 24 [ 2.369737] PPTP driver version 0.8.5 [ 2.374346] i2c /dev entries driver [ 2.383598] Speed bin: 0 [ 2.383621] PVS bin: 1 [ 2.385609] platform cpufreq-krait.0: Driver cpufreq-krait requests probe deferral [ 2.389398] L2 @ QSB rate. Forcing new rate. [ 2.395225] L2 @ 387500 KHz [ 2.399463] CPU0 @ 800000 KHz [ 2.401860] CPU1 @ QSB rate. Forcing new rate. [ 2.405163] CPU1 @ 384000 KHz [ 2.409628] GACT probability NOT on [ 2.412460] Mirror/redirect action on [ 2.415694] Simple TC action Loaded [ 2.420284] netem: version 1.3 [ 2.422912] u32 classifier [ 2.425902] Performance counters on [ 2.428596] input device check on [ 2.432326] Actions configured [ 2.436264] Netfilter messages via NETLINK v0.30. [ 2.439509] nf_conntrack version 0.5.0 (7519 buckets, 30076 max) [ 2.444654] nf_conntrack_rtsp v0.7 loading [ 2.450831] xt_time: kernel timezone is -0000 [ 2.454325] ip_set: protocol 6 [ 2.458914] gre: GRE over IPv4 demultiplexor driver [ 2.461851] nf_nat_rtsp v0.7 loading [ 2.466476] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.470449] TCP: bic registered [ 2.475563] TCP: cubic registered [ 2.478347] TCP: westwood registered [ 2.481818] TCP: highspeed registered [ 2.485526] TCP: hybla registered [ 2.489022] TCP: htcp registered [ 2.492400] TCP: vegas registered [ 2.495618] TCP: veno registered [ 2.498834] TCP: scalable registered [ 2.502131] TCP: lp registered [ 2.505771] TCP: yeah registered [ 2.508556] TCP: illinois registered [ 2.511946] NET: Registered protocol family 17 [ 2.515655] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 2.519801] Bridge firewalling registered [ 2.532607] 8021q: 802.1Q VLAN Support v1.8 [ 2.536547] Registering SWP/SWPB emulation handler [ 2.544007] trying to register driver generic_krait [ 2.545281] Frequency table not initialized. [ 2.550160] Frequency table not initialized. [ 2.554689] Frequency table not initialized. [ 2.558805] Frequency table not initialized. [ 2.563150] Frequency table not initialized. [ 2.568460] Frequency table not initialized. [ 2.571632] Frequency table not initialized. [ 2.575907] Frequency table not initialized. [ 2.580069] Frequency table not initialized. [ 2.584388] Frequency table not initialized. [ 2.588593] driver generic_krait up and running [ 2.592926] searching for nvram [ 2.597105] nvram size = -1066981562 [ 2.621217] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.629069] UBIFS error (pid 1): ubifs_mount: cannot open "ubi0:rootfs", error -19 [ 2.631790] VFS: Mounted root (squashfs filesystem) readonly on device 31:14. [ 2.635746] Freeing unused kernel memory: 184K (c06d8000 - c0706000) [ 5.123166] UBIFS error (pid 737): ubifs_mount: cannot open "ubi0:rootfs_data", error -19 [ 5.865180] Loading modules backported from Linux version wt-2016-05-12-0-g7a54796 [ 5.865205] Backport generated by backports.git backports-20160216-0-ge3c56e4 [ 6.328905] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142) [ 6.329457] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 6.464696] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2 [ 6.464749] ath10k_pci 0000:01:00.0: Falling back to user helper [ 6.729646] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002 [ 6.729683] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0 [ 6.739460] ath10k_pci 0000:01:00.0: firmware ver 10.4.1.00030-1 api 5 features no-p2p crc32 d2901e01 [ 7.607397] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 7.724413] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off [ 8.782440] ath10k_pci 0000:01:00.0: unable to read from the device [ 8.782467] ath10k_pci 0000:01:00.0: could not execute otp for board id check: -110 [ 8.787508] ath10k_pci 0000:01:00.0: failed to get board id from otp: -110 [ 8.807501] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002 from ath10k/QCA99X0/hw2.0/board-2.bin [ 8.807675] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 62700264 [ 10.198696] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1 [ 10.260621] ath: EEPROM regdomain: 0x0 [ 10.260641] ath: EEPROM indicates default country code should be used [ 10.260658] ath: doing EEPROM country->regdmn map search [ 10.260680] ath: country maps to regdmn code: 0x3a [ 10.260696] ath: Country alpha2 being used: US [ 10.260712] ath: Regpair used: 0x3a [ 10.272184] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142) [ 10.272994] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 10.404327] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0001:01:00.0.bin failed with error -2 [ 10.404370] ath10k_pci 0001:01:00.0: Falling back to user helper [ 10.415549] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002 [ 10.420088] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0 [ 10.431652] ath10k_pci 0001:01:00.0: firmware ver 10.4.1.00030-1 api 5 features no-p2p crc32 d2901e01 [ 12.472414] ath10k_pci 0001:01:00.0: unable to read from the device [ 12.472441] ath10k_pci 0001:01:00.0: could not execute otp for board id check: -110 [ 12.477482] ath10k_pci 0001:01:00.0: failed to get board id from otp: -110 [ 12.485310] ath10k_pci 0001:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002 from ath10k/QCA99X0/hw2.0/board-2.bin [ 12.492136] ath10k_pci 0001:01:00.0: board_file api 1 bmi_id N/A crc32 62700264 [ 13.900876] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1 [ 13.960310] ath: EEPROM regdomain: 0x0 [ 13.960332] ath: EEPROM indicates default country code should be used [ 13.960348] ath: doing EEPROM country->regdmn map search [ 13.960369] ath: country maps to regdmn code: 0x3a [ 13.960385] ath: Country alpha2 being used: US [ 13.960400] ath: Regpair used: 0x3a [ 16.133478] device br0 entered promiscuous mode [ 16.193194] device vlan1 entered promiscuous mode [ 16.193222] device eth0 entered promiscuous mode [ 16.202167] br0: port 1(vlan1) entered forwarding state [ 16.203293] br0: port 1(vlan1) entered forwarding state [ 16.208377] device br0 left promiscuous mode [ 16.216278] device br0 entered promiscuous mode [ 16.227627] device br0 left promiscuous mode [ 18.202398] br0: port 1(vlan1) entered forwarding state [ 23.735462] device ath0 entered promiscuous mode [ 23.735880] br0: port 2(ath0) entered forwarding state [ 23.739235] br0: port 2(ath0) entered forwarding state [ 25.732619] br0: port 2(ath0) entered forwarding state [ 25.776653] device ath1 entered promiscuous mode [ 25.777089] br0: port 3(ath1) entered forwarding state [ 25.780404] br0: port 3(ath1) entered forwarding state [ 26.167224] device vlan2 entered promiscuous mode [ 26.702450] device vlan2 left promiscuous mode [ 27.775270] br0: port 3(ath1) entered forwarding state [ 77.904384] usbcore: registered new interface driver usbfs [ 77.904894] usbcore: registered new interface driver hub [ 77.909152] usbcore: registered new device driver usb [ 77.937939] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 77.943851] ehci-platform: EHCI generic platform driver [ 77.960868] ehci-pci: EHCI PCI platform driver [ 78.005751] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 78.264031] soc:usb30@0 supply gdsc not found, using dummy regulator [ 78.265539] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 78.269770] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 78.275922] soc:usb30@1 supply gdsc not found, using dummy regulator [ 78.283365] platform 10000000.dwc3: Driver dwc3 requests probe deferral [ 78.289398] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 78.295835] platform 10000000.dwc3: Driver dwc3 requests probe deferral [ 78.321965] 100f8800.phy supply vddcx not found, using dummy regulator [ 78.322073] 100f8800.phy supply v3p3 not found, using dummy regulator [ 78.327544] 100f8800.phy supply v1p8 not found, using dummy regulator [ 78.334017] 100f8800.phy supply vbus not found, using dummy regulator [ 78.340803] 110f8800.phy supply vddcx not found, using dummy regulator [ 78.340916] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 78.341085] platform 10000000.dwc3: Driver dwc3 requests probe deferral [ 78.359807] 110f8800.phy supply v3p3 not found, using dummy regulator [ 78.366678] 110f8800.phy supply v1p8 not found, using dummy regulator [ 78.372976] 110f8800.phy supply vbus not found, using dummy regulator [ 78.379751] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 78.386372] platform 10000000.dwc3: Driver dwc3 requests probe deferral [ 78.390832] 100f8830.phy supply vddcx not found, using dummy regulator [ 78.391009] 100f8830.phy supply v1p8 not found, using dummy regulator [ 78.391087] qcom-dwc3-ssphy 100f8830.phy: cannot get HSIO settings from device node, using default values [ 78.391154] 110f8830.phy supply vddcx not found, using dummy regulator [ 78.391192] 110f8830.phy supply v1p8 not found, using dummy regulator [ 78.391245] qcom-dwc3-ssphy 110f8830.phy: cannot get HSIO settings from device node, using default values [ 78.434776] qcom-dwc3-hsphy 110f8800.phy: cannot set voltage for vddcx [ 78.443958] qcom-dwc3-hsphy 110f8800.phy: cannot set voltage for v3p3 [ 78.450310] qcom-dwc3-hsphy 110f8800.phy: cannot set voltage for v1p8 [ 78.456944] regulator-dummy: operation not allowed [ 78.463407] regulator-dummy: operation not allowed [ 78.470411] qcom-dwc3-ssphy 110f8830.phy: cannot set voltage for vddcx [ 78.713303] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 78.713383] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 78.717865] xhci-hcd xhci-hcd.0.auto: irq 142, io mem 0x11000000 [ 78.726482] hub 1-0:1.0: USB hub found [ 78.731695] hub 1-0:1.0: 1 port detected [ 78.735821] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 78.739134] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 78.745379] hub 2-0:1.0: USB hub found [ 78.754149] hub 2-0:1.0: 1 port detected [ 78.757398] qcom-dwc3-hsphy 100f8800.phy: cannot set voltage for vddcx [ 78.760033] qcom-dwc3-hsphy 100f8800.phy: cannot set voltage for v3p3 [ 78.766496] qcom-dwc3-hsphy 100f8800.phy: cannot set voltage for v1p8 [ 78.772802] regulator-dummy: operation not allowed [ 78.779133] regulator-dummy: operation not allowed [ 78.786378] qcom-dwc3-ssphy 100f8830.phy: cannot set voltage for vddcx [ 79.023055] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 79.023111] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 79.027621] xhci-hcd xhci-hcd.1.auto: irq 237, io mem 0x10000000 [ 79.036529] hub 3-0:1.0: USB hub found [ 79.041263] hub 3-0:1.0: 1 port detected [ 79.045695] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 79.048889] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 79.056307] hub 4-0:1.0: USB hub found [ 79.062114] hub 4-0:1.0: 1 port detected [ 79.062540] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 79.207500] usb 1-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes [ 79.207598] usb 1-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes [ 83.398713] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 83.398791] usb usb4: USB disconnect, device number 1 [ 83.407754] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered [ 83.407895] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 83.413890] usb usb3: USB disconnect, device number 1 [ 83.425125] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered [ 83.425316] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 83.435045] usb usb2: USB disconnect, device number 1 [ 83.447793] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 83.447915] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 83.456554] usb usb1: USB disconnect, device number 1 [ 83.457474] usb 1-1: USB disconnect, device number 2 [ 83.465933] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 83.476834] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 83.476918] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 83.481380] xhci-hcd xhci-hcd.0.auto: irq 142, io mem 0x11000000 [ 83.489936] hub 1-0:1.0: USB hub found [ 83.495424] hub 1-0:1.0: 1 port detected [ 83.499020] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 83.502749] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 83.509052] hub 2-0:1.0: USB hub found [ 83.515822] hub 2-0:1.0: 1 port detected [ 83.519820] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 83.523524] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 83.528884] xhci-hcd xhci-hcd.1.auto: irq 237, io mem 0x10000000 [ 83.537581] hub 3-0:1.0: USB hub found [ 83.542816] hub 3-0:1.0: 1 port detected [ 83.546493] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 83.550150] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 83.556634] hub 4-0:1.0: USB hub found [ 83.563071] hub 4-0:1.0: 1 port detected [ 83.598609] SCSI subsystem initialized [ 83.696554] usbcore: registered new interface driver usb-storage [ 83.783228] libata version 3.00 loaded. [ 83.812445] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 83.871684] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x0 impl platform mode [ 83.871747] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst [ 83.881417] scsi host0: ahci_platform [ 83.888540] ata1: DUMMY [ 83.956450] usb 1-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes [ 83.956500] usb 1-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes [ 83.969028] usb-storage 1-1:1.0: USB Mass Storage device detected [ 83.976308] scsi host1: usb-storage 1-1:1.0 [ 84.973448] scsi 1:0:0:0: Direct-Access LEXAR JUMPDRIVE SECURE 2000 PQ: 0 ANSI: 0 CCS [ 84.978385] sd 1:0:0:0: [sda] 248928 512-byte logical blocks: (127 MB/121 MiB) [ 84.981566] sd 1:0:0:0: [sda] Write Protect is off [ 84.988172] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 84.989571] sd 1:0:0:0: [sda] No Caching mode page found [ 84.992876] sd 1:0:0:0: [sda] Assuming drive cache: write through [ 85.044669] sda: sda1 [ 85.050369] sd 1:0:0:0: [sda] Attached SCSI disk [ 85.331036] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 85.343195] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. root@HOMEWORLD:~# ps PID USER VSZ STAT COMMAND 1 root 1296 S /sbin/init 2 root 0 SW [kthreadd] 3 root 0 SW [ksoftirqd/0] 5 root 0 SW< [kworker/0:0H] 6 root 0 SW [kworker/u4:0] 7 root 0 SW [rcu_preempt] 8 root 0 SW [rcu_sched] 9 root 0 SW [rcu_bh] 10 root 0 SW [migration/0] 11 root 0 SW [migration/1] 12 root 0 SW [ksoftirqd/1] 14 root 0 SW< [kworker/1:0H] 15 root 0 SW< [khelper] 16 root 0 SW< [writeback] 17 root 0 SW [kworker/0:1] 18 root 0 SW< [crypto] 19 root 0 SW< [bioset] 20 root 0 SW< [kblockd] 21 root 0 SW [kswapd0] 22 root 0 SW [fsnotify_mark] 31 root 0 SW [kworker/u4:1] 34 root 0 SW [kworker/1:1] 43 root 0 SW< [deferwq] 44 root 0 SW [kworker/0:2] 45 root 0 SW [kworker/1:2] 717 root 692 S /sbin/hotplug2 --set-rules-file /etc/hotplug2.rules --persistent 779 root 0 SW< [cfg80211] 787 root 0 SW< [ath10k_wq] 788 root 0 SW< [ath10k_aux_wq] 791 root 0 SW< [ath10k_wq] 792 root 0 SW< [ath10k_aux_wq] 968 root 2048 S hostapd -B -P /var/run/ath0_hostapd.pid /tmp/ath0_hostap.conf 990 root 2048 S hostapd -B -P /var/run/ath1_hostapd.pid /tmp/ath1_hostap.conf 1055 root 1084 S telnetd 1068 root 0 SW< [kworker/1:1H] 1079 root 1528 S wland 1091 root 976 S dnsmasq -u root -g root --conf-file=/tmp/dnsmasq.conf --cache-size=1500 1216 root 1076 S udhcpc -i vlan2 -p /var/run/udhcpc.pid -s /tmp/udhcpc -O routes -O msstaticroutes -O staticroutes 1225 root 1228 S ttraff 1340 root 1496 S resetbutton 1349 root 0 SW< [kworker/0:1H] 1485 root 4084 S httpd -p 80 1634 root 0 SW< [ata_sff] 1639 root 0 SW [scsi_eh_0] 1640 root 0 SW< [scsi_tmf_0] 1648 root 0 SW [scsi_eh_1] 1649 root 0 SW< [scsi_tmf_1] 1650 root 0 SW [usb-storage] 1738 root 668 S cron 1796 root 2792 S /usr/sbin/smbd -D --configfile=/tmp/smb.conf 1802 root 2600 S /usr/sbin/nmbd -D --configfile=/tmp/smb.conf 1957 root 1292 S process_monitor 1975 root 2924 S /usr/sbin/smbd -D --configfile=/tmp/smb.conf 2002 root 0 SW [kworker/0:0] 2004 root 0 SW [kworker/1:0] 2027 root 1080 S -sh 2054 root 1076 R ps root@HOMEWORLD:~# exit Connection closed by foreign host. ---------------------------- Last login: Thu Sep 8 17:47:19 on ttyp1 Welcome to Darwin! da-box:~ mrjcd$ telnet 192.168.1.1 Trying 192.168.1.1... Connected to homeworld. Escape character is '^]'. DD-WRT v3.0-r30082 std (c) 2016 NewMedia-NET GmbH Release: 07/01/16 HOMEWORLD login: root Password: ========================================================== ___ ___ _ _____ ______ ____ ___ / _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \ / // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // / /____/____/ |__/|__/_/|_| /_/ |___/____(_)___/ DD-WRT v3.0 http://www.dd-wrt.com ========================================================== BusyBox v1.24.2 (2016-07-01 02:02:53 CEST) built-in shell (ash) root@HOMEWORLD:~# cat /tmp/var/log/messages Sep 8 17:59:17 HOMEWORLD syslog.info syslogd started: BusyBox v1.24.2 Sep 8 22:59:17 HOMEWORLD user.info : klogd : klog daemon successfully started Sep 8 22:59:17 HOMEWORLD kern.notice kernel: klogd started: BusyBox v1.24.2 (2016-07-01 02:02:53 CEST) Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.000000] Booting Linux on physical CPU 0x0 Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 0.000000] Linux version 3.18.36 (root@seg-desktop) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 r47665) ) #81 SMP PREEMPT Sun Jun 26 02:51:26 CEST 2016 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.000000] Machine model: Linksys EA8500 WiFi Router Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 0.000000] Ignoring memory range 0x41500000 - 0x42000000 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.000000] Memory policy: Data cache writealloc Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 0.000000] On node 0 totalpages: 122880 Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat c0716840, node_mem_map ddc39000 Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 0.000000] Normal zone: 960 pages used for memmap Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 0.000000] Normal zone: 122880 pages, LIFO batch:31 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.000000] PERCPU: Embedded 9 pages/cpu @ddc13000 s7552 r8192 d21120 u36864 Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 0.000000] pcpu-alloc: s7552 r8192 d21120 u36864 alloc=9*4096 Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1 Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920 Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:14 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 0.000000] Memory: 481272K/491520K available (3822K kernel code, 282K rwdata, 1104K rodata, 184K init, 404K bss, 10248K reserved, 0K highmem) Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 0.000000] Virtual kernel memory layout: Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 0.000000] vmalloc : 0xde800000 - 0xff000000 ( 520 MB) Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB) Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 0.000000] .text : 0xc0208000 - 0xc06d7e4c (4928 kB) Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 0.000000] .init : 0xc06d8000 - 0xc0706000 ( 184 kB) Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 0.000000] .data : 0xc0706000 - 0xc074ca44 ( 283 kB) Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 0.000000] .bss : 0xc074ca44 - 0xc07b1bc4 ( 405 kB) Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.000000] Preemptible hierarchical RCU implementation. Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.000000] NR_IRQS:16 nr_irqs:16 16 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.000011] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 687194767200ns Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.000026] Switching to timer-based delay loop, resolution 160ns Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.000437] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500) Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.000462] pid_max: default: 32768 minimum: 301 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.000711] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.000729] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.001383] CPU: Testing write buffer coherency: ok Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.001646] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.002155] Setting up static identity map for 0x422131d8 - 0x42213230 Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 0.063431] CPU1: Booted secondary processor Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.063536] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.063652] Brought up 2 CPUs Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.063675] SMP: Total of 2 processors activated (25.00 BogoMIPS). Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.063686] CPU: All CPU(s) started in SVC mode. Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.078734] VFP support v0.3: implementor 51 architecture 0 part 4d variant 2 rev 0 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.079278] pinctrl core: initialized pinctrl subsystem Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.079717] regulator-dummy: no parameters Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.089796] NET: Registered protocol family 16 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.090123] DMA: preallocated 256 KiB pool for atomic coherent allocations Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.113851] cpuidle: using governor ladder Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.144865] cpuidle: using governor menu Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.164540] qcom_rpm 108000.rpm: RPM firmware 1.0.126 Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 0.164605] qcom_rpm 108000.rpm: failed to mark ack irq as wakeup Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 0.164662] qcom_rpm 108000.rpm: failed to mark wakeup irq as wakeup Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.208947] smb208-s1a: 1050 <--> 1150 mV Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.209272] smb208-s1b: 1050 <--> 1150 mV Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.209582] smb208-s2a: 800 <--> 1250 mV Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.209907] smb208-s2b: 800 <--> 1250 mV Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.210400] pps_core: LinuxPPS API ver. 1 registered Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.210412] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.210452] PTP clock support registered Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 0.211602] pcie_init: pcie_init: unable to create IPC log context for pcie0-short Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 0.211619] pcie_init: pcie_init: unable to create IPC log context for pcie0-long Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 0.211629] pcie_init: pcie_init: unable to create IPC log context for pcie1-short Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 0.211638] pcie_init: pcie_init: unable to create IPC log context for pcie1-long Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.212047] Switched to clocksource dg_timer Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.213491] NET: Registered protocol family 2 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.214171] TCP established hash table entries: 4096 (order: 2, 16384 bytes) Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.214207] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.214260] TCP: Hash tables configured (established 4096 bind 4096) Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.214307] TCP: reno registered Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.214327] UDP hash table entries: 256 (order: 1, 8192 bytes) Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.214349] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.214592] NET: Registered protocol family 1 Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 0.214654] PCI: CLS 0 bytes, default 64 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.215780] futex hash table entries: 512 (order: 3, 32768 bytes) Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.216758] squashfs: version 3.0 (2006/03/15) Phillip Lougher Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.216799] msgmni has been set to 939 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.219365] io scheduler noop registered Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.219388] io scheduler deadline registered (default) Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 0.220812] 1b500000.pci supply vdda not found, using dummy regulator Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 0.220891] 1b500000.pci supply vdda_phy not found, using dummy regulator Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 0.220962] 1b500000.pci supply vdda_refclk not found, using dummy regulator Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.250861] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.250884] pci_bus 0000:00: root bus resource [io 0xfe00000-0xfffff] (bus address [0x1fc00000-0xfefffff]) Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.250902] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff] Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.250921] pci_bus 0000:00: root bus resource [bus 00-ff] Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 0.250971] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400 Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 0.251119] pci 0000:00:00.0: supports D1 Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 0.251134] pci 0000:00:00.0: PME# supported from D0 D1 D3hot Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.251462] PCI: bus0: Fast back to back transfers disabled Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 0.251811] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000 Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 0.252013] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 0.253060] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.253504] PCI: bus1: Fast back to back transfers disabled Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 0.253524] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.253675] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff] Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.253698] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit] Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.253809] pci 0000:00:00.0: PCI bridge to [bus 01] Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.253829] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff] Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 0.254269] aer 0000:00:00.0:pcie02: service driver aer loaded Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 0.254614] 1b700000.pci supply vdda not found, using dummy regulator Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 0.254698] 1b700000.pci supply vdda_phy not found, using dummy regulator Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 0.254776] 1b700000.pci supply vdda_refclk not found, using dummy regulator Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.284243] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.284262] pci_bus 0001:00: root bus resource [io 0x31e10000-0xfffff] (bus address [0x63c00000-0x31eeffff]) Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.284277] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff] Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.284300] pci_bus 0001:00: root bus resource [bus 00-ff] Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 0.284344] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400 Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 0.284464] pci 0001:00:00.0: supports D1 Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 0.284477] pci 0001:00:00.0: PME# supported from D0 D1 D3hot Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.284787] PCI: bus0: Fast back to back transfers disabled Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 0.285128] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000 Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 0.285324] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 0.286263] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.286693] PCI: bus1: Fast back to back transfers disabled Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 0.286711] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.286928] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff] Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.286948] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit] Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.287054] pci 0001:00:00.0: PCI bridge to [bus 01] Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.287072] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff] Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 0.287461] aer 0001:00:00.0:pcie02: service driver aer loaded Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 0.287801] 1b900000.pci supply vdda not found, using dummy regulator Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 0.287879] 1b900000.pci supply vdda_phy not found, using dummy regulator Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 0.287950] 1b900000.pci supply vdda_refclk not found, using dummy regulator Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 0.419588] qcom-pcie 1b900000.pci: link initialization failed Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.421702] qcom-pcie 1b900000.pci: PCI host bridge to bus 0002:00 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.421721] pci_bus 0002:00: root bus resource [io 0x35e20000-0xfffff] (bus address [0x6bc00000-0x35edffff]) Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.421737] pci_bus 0002:00: root bus resource [mem 0x32000000-0x35dfffff] Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.421753] pci_bus 0002:00: root bus resource [bus 00-ff] Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.421804] PCI: bus0: Fast back to back transfers enabled Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.424513] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.425859] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.426891] msm_serial 16340000.serial: msm_serial: detected port #0 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.426990] msm_serial 16340000.serial: uartclk = 1843200 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.427047] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 184, base_baud = 115200) is a MSM Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 0.427103] msm_serial: console setup on port #0 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 1.153999] console [ttyMSM0] enabled Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 1.158779] msm_serial: driver initialized Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 1.165603] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 1.166045] nand: AMD/Spansion S34MS01G2 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 1.172626] nand: 128MiB, SLC, page size: 2048, OOB size: 64 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 1.176467] Scanning device for bad blocks Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 1.587889] random: nonblocking pool is initialized Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 1.890814] 19 ofpart partitions found on MTD device qcom-nandc Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 1.890843] Creating 19 MTD partitions on "qcom-nandc": Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 1.895628] 0x000000000000-0x000000040000 : "SBL1" Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 1.901669] 0x000000040000-0x000000180000 : "MIBIB" Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 1.906459] 0x000000180000-0x0000002c0000 : "SBL2" Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 1.911174] 0x0000002c0000-0x000000540000 : "SBL3" Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 1.916110] 0x000000540000-0x000000660000 : "DDRCONFIG" Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 1.920819] 0x000000660000-0x000000780000 : "SSD" Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 1.925985] 0x000000780000-0x000000a00000 : "TZ" Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 1.930799] 0x000000a00000-0x000000c80000 : "RPM" Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 1.935564] 0x000000c80000-0x000000dc0000 : "art" Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 1.940103] 0x000000dc0000-0x000000ec0000 : "APPSBL" Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 1.944845] 0x000000ec0000-0x000000f00000 : "u_env" Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 1.949838] 0x000000f00000-0x000000f40000 : "s_env" Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 1.954512] 0x000000f40000-0x000000f80000 : "devinfo" Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 1.959253] 0x000000f80000-0x000003780000 : "linux" Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 1.964592] 0x000001280000-0x000003780000 : "rootfs" Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 1.969220] mtd: partition "rootfs" set to be root filesystem Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 1.973657] 0x000003780000-0x000005f40000 : "linux2" Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 1.980071] 0x000003a80000-0x000005f40000 : "rootfs2" Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 1.985189] 0x000005f40000-0x000005f80000 : "nvram" Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 1.990010] 0x000005f80000-0x000008000000 : "ddwrt" Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 1.996105] IMQ: autocreate imq0 NS c0746d00 Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 1.999306] IMQ: autocreate imq1 NS c0746d00 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.003364] IMQ driver loaded successfully. (numdevs = 16, numqueues = 1) Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.007601] Hooking IMQ after NAT on PREROUTING. Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.014444] Hooking IMQ before NAT on POSTROUTING. Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.019379] libphy: Fixed MDIO Bus: probed Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.024251] libphy: GPIO Bitbanged MDIO: probed Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.048889] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.261857] tun: Universal TUN/TAP device driver, 1.6 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.261881] tun: (C) 1999-2004 Max Krasnyansky Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.267462] stmmac - user ID: 0x10, Synopsys ID: 0x37 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.271957] Ring mode enabled Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.277191] DMA HW capability register supported Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.280031] Enhanced/Alternate descriptors Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.284803] Enabled extended descriptors Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.288797] RX Checksum Offload Engine supported (type 2) Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.293045] TX Checksum insertion supported Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.298345] Wake-Up On Lan supported Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.302935] Enable RX Mitigation via HW Watchdog Timer Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.307602] stmmac - user ID: 0x10, Synopsys ID: 0x37 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.311367] Ring mode enabled Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.316677] DMA HW capability register supported Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.319525] Enhanced/Alternate descriptors Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.324299] Enabled extended descriptors Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.328292] RX Checksum Offload Engine supported (type 2) Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.332531] TX Checksum insertion supported Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.337840] Wake-Up On Lan supported Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.342327] Enable RX Mitigation via HW Watchdog Timer Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.346632] PPP generic driver version 2.4.2 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.351012] PPP BSD Compression module registered Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.355473] PPP Deflate Compression module registered Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.360000] PPP MPPE Compression module registered Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.365105] NET: Registered protocol family 24 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.369737] PPTP driver version 0.8.5 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.374346] i2c /dev entries driver Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.383598] Speed bin: 0 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.383621] PVS bin: 1 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.385609] platform cpufreq-krait.0: Driver cpufreq-krait requests probe deferral Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.389398] L2 @ QSB rate. Forcing new rate. Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.395225] L2 @ 387500 KHz Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.399463] CPU0 @ 800000 KHz Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.401860] CPU1 @ QSB rate. Forcing new rate. Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.405163] CPU1 @ 384000 KHz Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.409628] GACT probability NOT on Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.412460] Mirror/redirect action on Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.415694] Simple TC action Loaded Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.420284] netem: version 1.3 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.422912] u32 classifier Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.425902] Performance counters on Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.428596] input device check on Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.432326] Actions configured Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.436264] Netfilter messages via NETLINK v0.30. Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.439509] nf_conntrack version 0.5.0 (7519 buckets, 30076 max) Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 2.444654] nf_conntrack_rtsp v0.7 loading Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.450831] xt_time: kernel timezone is -0000 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.454325] ip_set: protocol 6 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.458914] gre: GRE over IPv4 demultiplexor driver Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 2.461851] nf_nat_rtsp v0.7 loading Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.466476] ip_tables: (C) 2000-2006 Netfilter Core Team Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.470449] TCP: bic registered Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.475563] TCP: cubic registered Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.478347] TCP: westwood registered Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.481818] TCP: highspeed registered Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.485526] TCP: hybla registered Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.489022] TCP: htcp registered Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.492400] TCP: vegas registered Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.495618] TCP: veno registered Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.498834] TCP: scalable registered Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.502131] TCP: lp registered Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.505771] TCP: yeah registered Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.508556] TCP: illinois registered Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.511946] NET: Registered protocol family 17 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.515655] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 2.519801] Bridge firewalling registered Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.532607] 8021q: 802.1Q VLAN Support v1.8 Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 2.536547] Registering SWP/SWPB emulation handler Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.544007] trying to register driver generic_krait Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 2.545281] Frequency table not initialized. Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 2.550160] Frequency table not initialized. Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 2.554689] Frequency table not initialized. Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 2.558805] Frequency table not initialized. Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 2.563150] Frequency table not initialized. Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 2.568460] Frequency table not initialized. Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 2.571632] Frequency table not initialized. Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 2.575907] Frequency table not initialized. Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 2.580069] Frequency table not initialized. Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 2.584388] Frequency table not initialized. Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.588593] driver generic_krait up and running Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.592926] searching for nvram Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.597105] nvram size = -1066981562 Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 2.621217] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 2.629069] UBIFS error (pid 1): ubifs_mount: cannot open "ubi0:rootfs", error -19 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.631790] VFS: Mounted root (squashfs filesystem) readonly on device 31:14. Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 2.635746] Freeing unused kernel memory: 184K (c06d8000 - c0706000) Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 5.123166] UBIFS error (pid 737): ubifs_mount: cannot open "ubi0:rootfs_data", error -19 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 5.865180] Loading modules backported from Linux version wt-2016-05-12-0-g7a54796 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 5.865205] Backport generated by backports.git backports-20160216-0-ge3c56e4 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 6.328905] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142) Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 6.329457] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 6.464696] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2 Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 6.464749] ath10k_pci 0000:01:00.0: Falling back to user helper Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 6.729646] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 6.729683] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 6.739460] ath10k_pci 0000:01:00.0: firmware ver 10.4.1.00030-1 api 5 features no-p2p crc32 d2901e01 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 7.607397] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 7.724413] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 8.782440] ath10k_pci 0000:01:00.0: unable to read from the device Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 8.782467] ath10k_pci 0000:01:00.0: could not execute otp for board id check: -110 Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 8.787508] ath10k_pci 0000:01:00.0: failed to get board id from otp: -110 Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 8.807501] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002 from ath10k/QCA99X0/hw2.0/board-2.bin Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 8.807675] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 62700264 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 10.198696] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1 Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 10.260621] ath: EEPROM regdomain: 0x0 Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 10.260641] ath: EEPROM indicates default country code should be used Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 10.260658] ath: doing EEPROM country->regdmn map search Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 10.260680] ath: country maps to regdmn code: 0x3a Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 10.260696] ath: Country alpha2 being used: US Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 10.260712] ath: Regpair used: 0x3a Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 10.272184] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142) Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 10.272994] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 10.404327] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0001:01:00.0.bin failed with error -2 Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 10.404370] ath10k_pci 0001:01:00.0: Falling back to user helper Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 10.415549] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 10.420088] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 10.431652] ath10k_pci 0001:01:00.0: firmware ver 10.4.1.00030-1 api 5 features no-p2p crc32 d2901e01 Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 12.472414] ath10k_pci 0001:01:00.0: unable to read from the device Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 12.472441] ath10k_pci 0001:01:00.0: could not execute otp for board id check: -110 Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 12.477482] ath10k_pci 0001:01:00.0: failed to get board id from otp: -110 Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 12.485310] ath10k_pci 0001:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002 from ath10k/QCA99X0/hw2.0/board-2.bin Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 12.492136] ath10k_pci 0001:01:00.0: board_file api 1 bmi_id N/A crc32 62700264 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 13.900876] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1 Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 13.960310] ath: EEPROM regdomain: 0x0 Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 13.960332] ath: EEPROM indicates default country code should be used Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 13.960348] ath: doing EEPROM country->regdmn map search Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 13.960369] ath: country maps to regdmn code: 0x3a Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 13.960385] ath: Country alpha2 being used: US Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 13.960400] ath: Regpair used: 0x3a Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 16.133478] device br0 entered promiscuous mode Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 16.193194] device vlan1 entered promiscuous mode Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 16.193222] device eth0 entered promiscuous mode Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 16.202167] br0: port 1(vlan1) entered forwarding state Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 16.203293] br0: port 1(vlan1) entered forwarding state Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 16.208377] device br0 left promiscuous mode Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 16.216278] device br0 entered promiscuous mode Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 16.227627] device br0 left promiscuous mode Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 18.202398] br0: port 1(vlan1) entered forwarding state Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 23.735462] device ath0 entered promiscuous mode Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 23.735880] br0: port 2(ath0) entered forwarding state Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 23.739235] br0: port 2(ath0) entered forwarding state Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 25.732619] br0: port 2(ath0) entered forwarding state Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 25.776653] device ath1 entered promiscuous mode Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 25.777089] br0: port 3(ath1) entered forwarding state Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 25.780404] br0: port 3(ath1) entered forwarding state Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 26.167224] device vlan2 entered promiscuous mode Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 26.702450] device vlan2 left promiscuous mode Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 27.775270] br0: port 3(ath1) entered forwarding state Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 77.904384] usbcore: registered new interface driver usbfs Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 77.904894] usbcore: registered new interface driver hub Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 77.909152] usbcore: registered new device driver usb Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 77.937939] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 77.943851] ehci-platform: EHCI generic platform driver Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 77.960868] ehci-pci: EHCI PCI platform driver Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 78.005751] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 78.264031] soc:usb30@0 supply gdsc not found, using dummy regulator Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 78.265539] platform 11000000.dwc3: Driver dwc3 requests probe deferral Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 78.269770] platform 11000000.dwc3: Driver dwc3 requests probe deferral Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 78.275922] soc:usb30@1 supply gdsc not found, using dummy regulator Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 78.283365] platform 10000000.dwc3: Driver dwc3 requests probe deferral Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 78.289398] platform 11000000.dwc3: Driver dwc3 requests probe deferral Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 78.295835] platform 10000000.dwc3: Driver dwc3 requests probe deferral Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 78.321965] 100f8800.phy supply vddcx not found, using dummy regulator Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 78.322073] 100f8800.phy supply v3p3 not found, using dummy regulator Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 78.327544] 100f8800.phy supply v1p8 not found, using dummy regulator Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 78.334017] 100f8800.phy supply vbus not found, using dummy regulator Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 78.340803] 110f8800.phy supply vddcx not found, using dummy regulator Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 78.340916] platform 11000000.dwc3: Driver dwc3 requests probe deferral Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 78.341085] platform 10000000.dwc3: Driver dwc3 requests probe deferral Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 78.359807] 110f8800.phy supply v3p3 not found, using dummy regulator Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 78.366678] 110f8800.phy supply v1p8 not found, using dummy regulator Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 78.372976] 110f8800.phy supply vbus not found, using dummy regulator Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 78.379751] platform 11000000.dwc3: Driver dwc3 requests probe deferral Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 78.386372] platform 10000000.dwc3: Driver dwc3 requests probe deferral Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 78.390832] 100f8830.phy supply vddcx not found, using dummy regulator Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 78.391009] 100f8830.phy supply v1p8 not found, using dummy regulator Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 78.391087] qcom-dwc3-ssphy 100f8830.phy: cannot get HSIO settings from device node, using default values Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 78.391154] 110f8830.phy supply vddcx not found, using dummy regulator Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 78.391192] 110f8830.phy supply v1p8 not found, using dummy regulator Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 78.391245] qcom-dwc3-ssphy 110f8830.phy: cannot get HSIO settings from device node, using default values Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 78.434776] qcom-dwc3-hsphy 110f8800.phy: cannot set voltage for vddcx Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 78.443958] qcom-dwc3-hsphy 110f8800.phy: cannot set voltage for v3p3 Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 78.450310] qcom-dwc3-hsphy 110f8800.phy: cannot set voltage for v1p8 Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 78.456944] regulator-dummy: operation not allowed Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 78.463407] regulator-dummy: operation not allowed Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 78.470411] qcom-dwc3-ssphy 110f8830.phy: cannot set voltage for vddcx Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 78.713303] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 78.713383] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 78.717865] xhci-hcd xhci-hcd.0.auto: irq 142, io mem 0x11000000 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 78.726482] hub 1-0:1.0: USB hub found Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 78.731695] hub 1-0:1.0: 1 port detected Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 78.735821] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 78.739134] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 78.745379] hub 2-0:1.0: USB hub found Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 78.754149] hub 2-0:1.0: 1 port detected Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 78.757398] qcom-dwc3-hsphy 100f8800.phy: cannot set voltage for vddcx Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 78.760033] qcom-dwc3-hsphy 100f8800.phy: cannot set voltage for v3p3 Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 78.766496] qcom-dwc3-hsphy 100f8800.phy: cannot set voltage for v1p8 Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 78.772802] regulator-dummy: operation not allowed Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 78.779133] regulator-dummy: operation not allowed Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 78.786378] qcom-dwc3-ssphy 100f8830.phy: cannot set voltage for vddcx Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 79.023055] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 79.023111] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 79.027621] xhci-hcd xhci-hcd.1.auto: irq 237, io mem 0x10000000 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 79.036529] hub 3-0:1.0: USB hub found Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 79.041263] hub 3-0:1.0: 1 port detected Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 79.045695] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 79.048889] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 79.056307] hub 4-0:1.0: USB hub found Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 79.062114] hub 4-0:1.0: 1 port detected Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 79.062540] usb 1-1: new high-speed USB device number 2 using xhci-hcd Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 79.207500] usb 1-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 79.207598] usb 1-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.398713] xhci-hcd xhci-hcd.1.auto: remove, state 1 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.398791] usb usb4: USB disconnect, device number 1 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.407754] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.407895] xhci-hcd xhci-hcd.1.auto: remove, state 1 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.413890] usb usb3: USB disconnect, device number 1 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.425125] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.425316] xhci-hcd xhci-hcd.0.auto: remove, state 1 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.435045] usb usb2: USB disconnect, device number 1 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.447793] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.447915] xhci-hcd xhci-hcd.0.auto: remove, state 1 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.456554] usb usb1: USB disconnect, device number 1 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.457474] usb 1-1: USB disconnect, device number 2 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.465933] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.476834] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.476918] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.481380] xhci-hcd xhci-hcd.0.auto: irq 142, io mem 0x11000000 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.489936] hub 1-0:1.0: USB hub found Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.495424] hub 1-0:1.0: 1 port detected Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.499020] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.502749] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.509052] hub 2-0:1.0: USB hub found Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.515822] hub 2-0:1.0: 1 port detected Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.519820] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.523524] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.528884] xhci-hcd xhci-hcd.1.auto: irq 237, io mem 0x10000000 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.537581] hub 3-0:1.0: USB hub found Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.542816] hub 3-0:1.0: 1 port detected Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.546493] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.550150] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.556634] hub 4-0:1.0: USB hub found Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.563071] hub 4-0:1.0: 1 port detected Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 83.598609] SCSI subsystem initialized Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.696554] usbcore: registered new interface driver usb-storage Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 83.783228] libata version 3.00 loaded. Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.812445] usb 1-1: new high-speed USB device number 2 using xhci-hcd Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.871684] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x0 impl platform mode Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.871747] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.881417] scsi host0: ahci_platform Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.888540] ata1: DUMMY Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 83.956450] usb 1-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 83.956500] usb 1-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.969028] usb-storage 1-1:1.0: USB Mass Storage device detected Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 83.976308] scsi host1: usb-storage 1-1:1.0 Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 84.973448] scsi 1:0:0:0: Direct-Access LEXAR JUMPDRIVE SECURE 2000 PQ: 0 ANSI: 0 CCS Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 84.978385] sd 1:0:0:0: [sda] 248928 512-byte logical blocks: (127 MB/121 MiB) Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 84.981566] sd 1:0:0:0: [sda] Write Protect is off Sep 8 22:59:17 HOMEWORLD kern.debug kernel: [ 84.988172] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00 Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 84.989571] sd 1:0:0:0: [sda] No Caching mode page found Sep 8 22:59:17 HOMEWORLD kern.err kernel: [ 84.992876] sd 1:0:0:0: [sda] Assuming drive cache: write through Sep 8 22:59:17 HOMEWORLD kern.info kernel: [ 85.044669] sda: sda1 Sep 8 22:59:17 HOMEWORLD kern.notice kernel: [ 85.050369] sd 1:0:0:0: [sda] Attached SCSI disk Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 85.331036] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Sep 8 22:59:17 HOMEWORLD kern.warn kernel: [ 85.343195] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. Sep 8 22:59:17 HOMEWORLD user.info : vpn modules : vpn modules successfully unloaded Sep 8 22:59:17 HOMEWORLD user.info : vpn modules : nf_conntrack_proto_gre successfully loaded Sep 8 22:59:17 HOMEWORLD user.info : vpn modules : nf_nat_proto_gre successfully loaded Sep 8 22:59:17 HOMEWORLD user.info : vpn modules : nf_conntrack_pptp successfully loaded Sep 8 22:59:18 HOMEWORLD user.info : vpn modules : nf_nat_pptp successfully loaded Sep 8 22:59:18 HOMEWORLD user.info : telnetd : telnet daemon successfully stopped Sep 8 22:59:18 HOMEWORLD user.info : dnsmasq : dnsmasq daemon successfully stopped Sep 8 22:59:18 HOMEWORLD user.info : pptpd : pptp daemon successfully stopped Sep 8 22:59:18 HOMEWORLD user.info : hwmon successfully started Sep 8 22:59:18 HOMEWORLD user.info : telnetd : telnet daemon successfully started Sep 8 22:59:18 HOMEWORLD user.info : dnsmasq : dnsmasq daemon successfully started Sep 8 22:59:18 HOMEWORLD user.info : vpn modules : vpn modules successfully unloaded Sep 8 22:59:18 HOMEWORLD user.info : vpn modules : nf_conntrack_proto_gre successfully loaded Sep 8 22:59:18 HOMEWORLD user.info : vpn modules : nf_nat_proto_gre successfully loaded Sep 8 22:59:19 HOMEWORLD user.info : vpn modules : nf_conntrack_pptp successfully loaded Sep 8 22:59:19 HOMEWORLD user.info : vpn modules : nf_nat_pptp successfully loaded Sep 8 22:59:19 HOMEWORLD user.info : klogd : kernel log daemon successfully stopped Sep 8 22:59:19 HOMEWORLD kern.notice kernel: klogd: exiting Sep 8 22:59:19 HOMEWORLD user.info : syslogd : syslog daemon successfully stopped Sep 8 17:59:19 HOMEWORLD syslog.info syslogd exiting Sep 8 17:59:19 HOMEWORLD syslog.info syslogd started: BusyBox v1.24.2 Sep 8 22:59:19 HOMEWORLD user.info : klogd : klog daemon successfully started Sep 8 22:59:19 HOMEWORLD kern.notice kernel: klogd started: BusyBox v1.24.2 (2016-07-01 02:02:53 CEST) Sep 8 22:59:20 HOMEWORLD user.info : vpn modules : vpn modules successfully unloaded Sep 8 22:59:20 HOMEWORLD user.info : vpn modules : nf_conntrack_proto_gre successfully loaded Sep 8 22:59:20 HOMEWORLD user.info : vpn modules : nf_nat_proto_gre successfully loaded Sep 8 22:59:20 HOMEWORLD user.info : vpn modules : nf_conntrack_pptp successfully loaded Sep 8 22:59:20 HOMEWORLD user.info : vpn modules : nf_nat_pptp successfully loaded Sep 8 22:59:21 HOMEWORLD user.info : vpn modules : vpn modules successfully unloaded Sep 8 22:59:21 HOMEWORLD user.info : vpn modules : nf_conntrack_proto_gre successfully loaded Sep 8 22:59:21 HOMEWORLD user.info : vpn modules : nf_nat_proto_gre successfully loaded Sep 8 22:59:21 HOMEWORLD user.info : vpn modules : nf_conntrack_pptp successfully loaded Sep 8 22:59:21 HOMEWORLD user.info : vpn modules : nf_nat_pptp successfully loaded Sep 8 22:59:41 HOMEWORLD auth.info login[3136]: root login on 'pts/0' root@HOMEWORLD:~# iw reg get global country US: DFS-FCC (2402 - 2472 @ 40), (N/A, 30), (N/A) (5170 - 5250 @ 80), (N/A, 23), (N/A) (5250 - 5330 @ 80), (N/A, 23), (N/A) (5490 - 5730 @ 160), (N/A, 23), (N/A) (5735 - 5835 @ 80), (N/A, 30), (N/A) (57240 - 63720 @ 2160), (N/A, 40), (N/A) phy#1 country US: DFS-FCC (2402 - 2472 @ 40), (N/A, 30), (N/A) (5170 - 5250 @ 80), (N/A, 23), (N/A) (5250 - 5330 @ 80), (N/A, 23), (N/A) (5490 - 5730 @ 160), (N/A, 23), (N/A) (5735 - 5835 @ 80), (N/A, 30), (N/A) (57240 - 63720 @ 2160), (N/A, 40), (N/A) phy#0 country US: DFS-FCC (2402 - 2472 @ 40), (N/A, 30), (N/A) (5170 - 5250 @ 80), (N/A, 23), (N/A) (5250 - 5330 @ 80), (N/A, 23), (N/A) (5490 - 5730 @ 160), (N/A, 23), (N/A) (5735 - 5835 @ 80), (N/A, 30), (N/A) (57240 - 63720 @ 2160), (N/A, 40), (N/A) root@HOMEWORLD:~# iwconfig br0 no wireless extensions. vlan1 no wireless extensions. imq0 no wireless extensions. ath0 IEEE 802.11 Mode:Master Retry short limit:7 RTS thr:off Fragment thr:off Power Management:off imq1 no wireless extensions. ath1 IEEE 802.11 Mode:Master Retry short limit:7 RTS thr:off Fragment thr:off Power Management:off lo no wireless extensions. eth0 no wireless extensions. eth1 no wireless extensions. vlan2 no wireless extensions. teql0 no wireless extensions. root@HOMEWORLD:~# iwlist frequency br0 no frequency information. vlan1 no frequency information. imq0 no frequency information. ath0 11 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz Channel 03 : 2.422 GHz Channel 04 : 2.427 GHz Channel 05 : 2.432 GHz Channel 06 : 2.437 GHz Channel 07 : 2.442 GHz Channel 08 : 2.447 GHz Channel 09 : 2.452 GHz Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz imq1 no frequency information. ath1 25 channels in total; available frequencies : Channel 36 : 5.18 GHz Channel 40 : 5.2 GHz Channel 44 : 5.22 GHz Channel 48 : 5.24 GHz Channel 52 : 5.26 GHz Channel 56 : 5.28 GHz Channel 60 : 5.3 GHz Channel 64 : 5.32 GHz Channel 100 : 5.5 GHz Channel 104 : 5.52 GHz Channel 108 : 5.54 GHz Channel 112 : 5.56 GHz Channel 116 : 5.58 GHz Channel 120 : 5.6 GHz Channel 124 : 5.62 GHz Channel 128 : 5.64 GHz Channel 132 : 5.66 GHz Channel 136 : 5.68 GHz Channel 140 : 5.7 GHz Channel 144 : 5.72 GHz Channel 149 : 5.745 GHz Channel 153 : 5.765 GHz Channel 157 : 5.785 GHz Channel 161 : 5.805 GHz Channel 165 : 5.825 GHz lo no frequency information. eth0 no frequency information. eth1 no frequency information. vlan2 no frequency information. teql0 no frequency information. root@HOMEWORLD:~# ifconfig ath0 Link encap:Ethernet HWaddr C0:56:27:08:B2:94 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:299 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:45662 (44.5 KiB) ath1 Link encap:Ethernet HWaddr C0:56:27:08:B2:95 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:297 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:45446 (44.3 KiB) br0 Link encap:Ethernet HWaddr C0:56:27:08:B2:92 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:16564 errors:0 dropped:13 overruns:0 frame:0 TX packets:22113 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:169817524 (161.9 MiB) TX bytes:11000481 (10.4 MiB) br0:0 Link encap:Ethernet HWaddr C0:56:27:08:B2:92 inet addr:169.254.255.1 Bcast:169.254.255.255 Mask:255.255.0.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth0 Link encap:Ethernet HWaddr C0:56:27:08:B2:92 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:129511 errors:0 dropped:0 overruns:0 frame:0 TX packets:22380 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:178652853 (170.3 MiB) TX bytes:11136540 (10.6 MiB) Interrupt:255 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MULTICAST MTU:65536 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:232 (232.0 B) TX bytes:232 (232.0 B) vlan1 Link encap:Ethernet HWaddr C0:56:27:08:B2:92 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:16579 errors:0 dropped:0 overruns:0 frame:0 TX packets:22113 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:169819002 (161.9 MiB) TX bytes:11000481 (10.4 MiB) vlan2 Link encap:Ethernet HWaddr C0:56:27:08:B2:93 inet addr:10.72.28.160 Bcast:10.72.29.255 Mask:255.255.254.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:687 errors:0 dropped:109 overruns:0 frame:0 TX packets:268 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:665913 (650.3 KiB) TX bytes:46649 (45.5 KiB) root@HOMEWORLD:~# iwconfig br0 no wireless extensions. vlan1 no wireless extensions. imq0 no wireless extensions. ath0 IEEE 802.11 Mode:Master Retry short limit:7 RTS thr:off Fragment thr:off Power Management:off imq1 no wireless extensions. ath1 IEEE 802.11 Mode:Master Retry short limit:7 RTS thr:off Fragment thr:off Power Management:off lo no wireless extensions. eth0 no wireless extensions. eth1 no wireless extensions. vlan2 no wireless extensions. teql0 no wireless extensions. root@HOMEWORLD:~# cat /tmp/ath0_hostap.conf driver=nl80211 ctrl_interface=/var/run/hostapd wmm_ac_bk_cwmin=4 wmm_ac_bk_cwmax=10 wmm_ac_bk_aifs=7 wmm_ac_bk_txop_limit=0 wmm_ac_bk_acm=0 wmm_ac_be_aifs=3 wmm_ac_be_cwmin=4 wmm_ac_be_cwmax=10 wmm_ac_be_acm=0 wmm_ac_vi_aifs=2 wmm_ac_vi_cwmin=3 wmm_ac_vi_cwmax=4 wmm_ac_vi_txop_limit=94 wmm_ac_vi_acm=0 wmm_ac_vo_aifs=2 wmm_ac_vo_cwmin=2 wmm_ac_vo_cwmax=3 wmm_ac_vo_txop_limit=47 wmm_ac_vo_acm=0 tx_queue_data3_aifs=7 tx_queue_data3_cwmin=15 tx_queue_data3_cwmax=1023 tx_queue_data3_burst=0 tx_queue_data2_aifs=3 tx_queue_data2_cwmin=15 tx_queue_data2_cwmax=63 tx_queue_data1_aifs=1 tx_queue_data1_cwmin=7 tx_queue_data1_cwmax=15 tx_queue_data1_burst=3.0 tx_queue_data0_aifs=1 tx_queue_data0_cwmin=3 tx_queue_data0_cwmax=7 tx_queue_data0_burst=1.5 country_code=US tx_queue_data2_burst=2.0 wmm_ac_be_txop_limit=64 ieee80211n=1 dynamic_ht40=0 ht_capab=[HT40+][LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40][MAX-AMSDU-7935] hw_mode=g channel=1 frequency=2412 beacon_int=100 dtim_period=2 interface=ath0 disassoc_low_ack=1 wmm_enabled=1 bssid=C0:56:27:08:B2:94 ignore_broadcast_ssid=0 max_num_sta=256 ssid=dd-wrt root@HOMEWORLD:~# cat /tmp/ath1_hostap.conf driver=nl80211 ctrl_interface=/var/run/hostapd wmm_ac_bk_cwmin=4 wmm_ac_bk_cwmax=10 wmm_ac_bk_aifs=7 wmm_ac_bk_txop_limit=0 wmm_ac_bk_acm=0 wmm_ac_be_aifs=3 wmm_ac_be_cwmin=4 wmm_ac_be_cwmax=10 wmm_ac_be_acm=0 wmm_ac_vi_aifs=2 wmm_ac_vi_cwmin=3 wmm_ac_vi_cwmax=4 wmm_ac_vi_txop_limit=94 wmm_ac_vi_acm=0 wmm_ac_vo_aifs=2 wmm_ac_vo_cwmin=2 wmm_ac_vo_cwmax=3 wmm_ac_vo_txop_limit=47 wmm_ac_vo_acm=0 tx_queue_data3_aifs=7 tx_queue_data3_cwmin=15 tx_queue_data3_cwmax=1023 tx_queue_data3_burst=0 tx_queue_data2_aifs=3 tx_queue_data2_cwmin=15 tx_queue_data2_cwmax=63 tx_queue_data1_aifs=1 tx_queue_data1_cwmin=7 tx_queue_data1_cwmax=15 tx_queue_data1_burst=3.0 tx_queue_data0_aifs=1 tx_queue_data0_cwmin=3 tx_queue_data0_cwmax=7 tx_queue_data0_burst=1.5 country_code=US tx_queue_data2_burst=2.0 wmm_ac_be_txop_limit=64 require_ht=1 ieee80211n=1 dynamic_ht40=0 ht_capab=[HT40-][LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40][MAX-AMSDU-7935] vht_capab=[RXLDPC][SHORT-GI-80][TX-STBC-2BY1][RX-STBC1][SU-BEAMFORMER][SU-BEAMFORMEE][MU-BEAMFORMER][MU-BEAMFORMEE][RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN][MAX-MPDU-11454][MAX-A-MPDU-LEN-EXP7][BF-ANTENNA-2][SOUNDING-DIMENSION-2] ieee80211ac=1 require_vht=1 ieee80211d=1 ieee80211h=1 vht_oper_chwidth=1 vht_oper_centr_freq_seg0_idx=134 hw_mode=a channel=140 frequency=5700 beacon_int=100 dtim_period=2 interface=ath1 disassoc_low_ack=1 wmm_enabled=1 bssid=C0:56:27:08:B2:95 ignore_broadcast_ssid=0 max_num_sta=256 ssid=dd-wrt5ghz root@HOMEWORLD:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.18.36 (root@seg-desktop) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 r47665) ) #81 SMP PREEMPT Sun Jun 26 02:51:26 CEST 2016 [ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Linksys EA8500 WiFi Router [ 0.000000] Ignoring memory range 0x41500000 - 0x42000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 122880 [ 0.000000] free_area_init_node: node 0, pgdat c0716840, node_mem_map ddc39000 [ 0.000000] Normal zone: 960 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 122880 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 9 pages/cpu @ddc13000 s7552 r8192 d21120 u36864 [ 0.000000] pcpu-alloc: s7552 r8192 d21120 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920 [ 0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:14 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 481272K/491520K available (3822K kernel code, 282K rwdata, 1104K rodata, 184K init, 404K bss, 10248K reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xde800000 - 0xff000000 ( 520 MB) [ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc06d7e4c (4928 kB) [ 0.000000] .init : 0xc06d8000 - 0xc0706000 ( 184 kB) [ 0.000000] .data : 0xc0706000 - 0xc074ca44 ( 283 kB) [ 0.000000] .bss : 0xc074ca44 - 0xc07b1bc4 ( 405 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000011] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 687194767200ns [ 0.000026] Switching to timer-based delay loop, resolution 160ns [ 0.000437] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500) [ 0.000462] pid_max: default: 32768 minimum: 301 [ 0.000711] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000729] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001383] CPU: Testing write buffer coherency: ok [ 0.001646] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002155] Setting up static identity map for 0x422131d8 - 0x42213230 [ 0.063431] CPU1: Booted secondary processor [ 0.063536] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.063652] Brought up 2 CPUs [ 0.063675] SMP: Total of 2 processors activated (25.00 BogoMIPS). [ 0.063686] CPU: All CPU(s) started in SVC mode. [ 0.078734] VFP support v0.3: implementor 51 architecture 0 part 4d variant 2 rev 0 [ 0.079278] pinctrl core: initialized pinctrl subsystem [ 0.079717] regulator-dummy: no parameters [ 0.089796] NET: Registered protocol family 16 [ 0.090123] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.113851] cpuidle: using governor ladder [ 0.144865] cpuidle: using governor menu [ 0.164540] qcom_rpm 108000.rpm: RPM firmware 1.0.126 [ 0.164605] qcom_rpm 108000.rpm: failed to mark ack irq as wakeup [ 0.164662] qcom_rpm 108000.rpm: failed to mark wakeup irq as wakeup [ 0.208947] smb208-s1a: 1050 <--> 1150 mV [ 0.209272] smb208-s1b: 1050 <--> 1150 mV [ 0.209582] smb208-s2a: 800 <--> 1250 mV [ 0.209907] smb208-s2b: 800 <--> 1250 mV [ 0.210400] pps_core: LinuxPPS API ver. 1 registered [ 0.210412] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.210452] PTP clock support registered [ 0.211602] pcie_init: pcie_init: unable to create IPC log context for pcie0-short [ 0.211619] pcie_init: pcie_init: unable to create IPC log context for pcie0-long [ 0.211629] pcie_init: pcie_init: unable to create IPC log context for pcie1-short [ 0.211638] pcie_init: pcie_init: unable to create IPC log context for pcie1-long [ 0.212047] Switched to clocksource dg_timer [ 0.213491] NET: Registered protocol family 2 [ 0.214171] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.214207] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.214260] TCP: Hash tables configured (established 4096 bind 4096) [ 0.214307] TCP: reno registered [ 0.214327] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.214349] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.214592] NET: Registered protocol family 1 [ 0.214654] PCI: CLS 0 bytes, default 64 [ 0.215780] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.216758] squashfs: version 3.0 (2006/03/15) Phillip Lougher [ 0.216799] msgmni has been set to 939 [ 0.219365] io scheduler noop registered [ 0.219388] io scheduler deadline registered (default) [ 0.220812] 1b500000.pci supply vdda not found, using dummy regulator [ 0.220891] 1b500000.pci supply vdda_phy not found, using dummy regulator [ 0.220962] 1b500000.pci supply vdda_refclk not found, using dummy regulator [ 0.250861] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00 [ 0.250884] pci_bus 0000:00: root bus resource [io 0xfe00000-0xfffff] (bus address [0x1fc00000-0xfefffff]) [ 0.250902] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff] [ 0.250921] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.250971] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400 [ 0.251119] pci 0000:00:00.0: supports D1 [ 0.251134] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 0.251462] PCI: bus0: Fast back to back transfers disabled [ 0.251811] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000 [ 0.252013] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 0.253060] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.253504] PCI: bus1: Fast back to back transfers disabled [ 0.253524] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.253675] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff] [ 0.253698] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit] [ 0.253809] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.253829] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff] [ 0.254269] aer 0000:00:00.0:pcie02: service driver aer loaded [ 0.254614] 1b700000.pci supply vdda not found, using dummy regulator [ 0.254698] 1b700000.pci supply vdda_phy not found, using dummy regulator [ 0.254776] 1b700000.pci supply vdda_refclk not found, using dummy regulator [ 0.284243] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00 [ 0.284262] pci_bus 0001:00: root bus resource [io 0x31e10000-0xfffff] (bus address [0x63c00000-0x31eeffff]) [ 0.284277] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff] [ 0.284300] pci_bus 0001:00: root bus resource [bus 00-ff] [ 0.284344] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400 [ 0.284464] pci 0001:00:00.0: supports D1 [ 0.284477] pci 0001:00:00.0: PME# supported from D0 D1 D3hot [ 0.284787] PCI: bus0: Fast back to back transfers disabled [ 0.285128] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000 [ 0.285324] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 0.286263] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold [ 0.286693] PCI: bus1: Fast back to back transfers disabled [ 0.286711] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.286928] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff] [ 0.286948] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit] [ 0.287054] pci 0001:00:00.0: PCI bridge to [bus 01] [ 0.287072] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff] [ 0.287461] aer 0001:00:00.0:pcie02: service driver aer loaded [ 0.287801] 1b900000.pci supply vdda not found, using dummy regulator [ 0.287879] 1b900000.pci supply vdda_phy not found, using dummy regulator [ 0.287950] 1b900000.pci supply vdda_refclk not found, using dummy regulator [ 0.419588] qcom-pcie 1b900000.pci: link initialization failed [ 0.421702] qcom-pcie 1b900000.pci: PCI host bridge to bus 0002:00 [ 0.421721] pci_bus 0002:00: root bus resource [io 0x35e20000-0xfffff] (bus address [0x6bc00000-0x35edffff]) [ 0.421737] pci_bus 0002:00: root bus resource [mem 0x32000000-0x35dfffff] [ 0.421753] pci_bus 0002:00: root bus resource [bus 00-ff] [ 0.421804] PCI: bus0: Fast back to back transfers enabled [ 0.424513] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0 [ 0.425859] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.426891] msm_serial 16340000.serial: msm_serial: detected port #0 [ 0.426990] msm_serial 16340000.serial: uartclk = 1843200 [ 0.427047] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 184, base_baud = 115200) is a MSM [ 0.427103] msm_serial: console setup on port #0 [ 1.153999] console [ttyMSM0] enabled [ 1.158779] msm_serial: driver initialized [ 1.165603] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1 [ 1.166045] nand: AMD/Spansion S34MS01G2 [ 1.172626] nand: 128MiB, SLC, page size: 2048, OOB size: 64 [ 1.176467] Scanning device for bad blocks [ 1.587889] random: nonblocking pool is initialized [ 1.890814] 19 ofpart partitions found on MTD device qcom-nandc [ 1.890843] Creating 19 MTD partitions on "qcom-nandc": [ 1.895628] 0x000000000000-0x000000040000 : "SBL1" [ 1.901669] 0x000000040000-0x000000180000 : "MIBIB" [ 1.906459] 0x000000180000-0x0000002c0000 : "SBL2" [ 1.911174] 0x0000002c0000-0x000000540000 : "SBL3" [ 1.916110] 0x000000540000-0x000000660000 : "DDRCONFIG" [ 1.920819] 0x000000660000-0x000000780000 : "SSD" [ 1.925985] 0x000000780000-0x000000a00000 : "TZ" [ 1.930799] 0x000000a00000-0x000000c80000 : "RPM" [ 1.935564] 0x000000c80000-0x000000dc0000 : "art" [ 1.940103] 0x000000dc0000-0x000000ec0000 : "APPSBL" [ 1.944845] 0x000000ec0000-0x000000f00000 : "u_env" [ 1.949838] 0x000000f00000-0x000000f40000 : "s_env" [ 1.954512] 0x000000f40000-0x000000f80000 : "devinfo" [ 1.959253] 0x000000f80000-0x000003780000 : "linux" [ 1.964592] 0x000001280000-0x000003780000 : "rootfs" [ 1.969220] mtd: partition "rootfs" set to be root filesystem [ 1.973657] 0x000003780000-0x000005f40000 : "linux2" [ 1.980071] 0x000003a80000-0x000005f40000 : "rootfs2" [ 1.985189] 0x000005f40000-0x000005f80000 : "nvram" [ 1.990010] 0x000005f80000-0x000008000000 : "ddwrt" [ 1.996105] IMQ: autocreate imq0 NS c0746d00 [ 1.999306] IMQ: autocreate imq1 NS c0746d00 [ 2.003364] IMQ driver loaded successfully. (numdevs = 16, numqueues = 1) [ 2.007601] Hooking IMQ after NAT on PREROUTING. [ 2.014444] Hooking IMQ before NAT on POSTROUTING. [ 2.019379] libphy: Fixed MDIO Bus: probed [ 2.024251] libphy: GPIO Bitbanged MDIO: probed [ 2.048889] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0 [ 2.261857] tun: Universal TUN/TAP device driver, 1.6 [ 2.261881] tun: (C) 1999-2004 Max Krasnyansky [ 2.267462] stmmac - user ID: 0x10, Synopsys ID: 0x37 [ 2.271957] Ring mode enabled [ 2.277191] DMA HW capability register supported [ 2.280031] Enhanced/Alternate descriptors [ 2.284803] Enabled extended descriptors [ 2.288797] RX Checksum Offload Engine supported (type 2) [ 2.293045] TX Checksum insertion supported [ 2.298345] Wake-Up On Lan supported [ 2.302935] Enable RX Mitigation via HW Watchdog Timer [ 2.307602] stmmac - user ID: 0x10, Synopsys ID: 0x37 [ 2.311367] Ring mode enabled [ 2.316677] DMA HW capability register supported [ 2.319525] Enhanced/Alternate descriptors [ 2.324299] Enabled extended descriptors [ 2.328292] RX Checksum Offload Engine supported (type 2) [ 2.332531] TX Checksum insertion supported [ 2.337840] Wake-Up On Lan supported [ 2.342327] Enable RX Mitigation via HW Watchdog Timer [ 2.346632] PPP generic driver version 2.4.2 [ 2.351012] PPP BSD Compression module registered [ 2.355473] PPP Deflate Compression module registered [ 2.360000] PPP MPPE Compression module registered [ 2.365105] NET: Registered protocol family 24 [ 2.369737] PPTP driver version 0.8.5 [ 2.374346] i2c /dev entries driver [ 2.383598] Speed bin: 0 [ 2.383621] PVS bin: 1 [ 2.385609] platform cpufreq-krait.0: Driver cpufreq-krait requests probe deferral [ 2.389398] L2 @ QSB rate. Forcing new rate. [ 2.395225] L2 @ 387500 KHz [ 2.399463] CPU0 @ 800000 KHz [ 2.401860] CPU1 @ QSB rate. Forcing new rate. [ 2.405163] CPU1 @ 384000 KHz [ 2.409628] GACT probability NOT on [ 2.412460] Mirror/redirect action on [ 2.415694] Simple TC action Loaded [ 2.420284] netem: version 1.3 [ 2.422912] u32 classifier [ 2.425902] Performance counters on [ 2.428596] input device check on [ 2.432326] Actions configured [ 2.436264] Netfilter messages via NETLINK v0.30. [ 2.439509] nf_conntrack version 0.5.0 (7519 buckets, 30076 max) [ 2.444654] nf_conntrack_rtsp v0.7 loading [ 2.450831] xt_time: kernel timezone is -0000 [ 2.454325] ip_set: protocol 6 [ 2.458914] gre: GRE over IPv4 demultiplexor driver [ 2.461851] nf_nat_rtsp v0.7 loading [ 2.466476] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.470449] TCP: bic registered [ 2.475563] TCP: cubic registered [ 2.478347] TCP: westwood registered [ 2.481818] TCP: highspeed registered [ 2.485526] TCP: hybla registered [ 2.489022] TCP: htcp registered [ 2.492400] TCP: vegas registered [ 2.495618] TCP: veno registered [ 2.498834] TCP: scalable registered [ 2.502131] TCP: lp registered [ 2.505771] TCP: yeah registered [ 2.508556] TCP: illinois registered [ 2.511946] NET: Registered protocol family 17 [ 2.515655] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 2.519801] Bridge firewalling registered [ 2.532607] 8021q: 802.1Q VLAN Support v1.8 [ 2.536547] Registering SWP/SWPB emulation handler [ 2.544007] trying to register driver generic_krait [ 2.545281] Frequency table not initialized. [ 2.550160] Frequency table not initialized. [ 2.554689] Frequency table not initialized. [ 2.558805] Frequency table not initialized. [ 2.563150] Frequency table not initialized. [ 2.568460] Frequency table not initialized. [ 2.571632] Frequency table not initialized. [ 2.575907] Frequency table not initialized. [ 2.580069] Frequency table not initialized. [ 2.584388] Frequency table not initialized. [ 2.588593] driver generic_krait up and running [ 2.592926] searching for nvram [ 2.597105] nvram size = -1066981562 [ 2.621217] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.629069] UBIFS error (pid 1): ubifs_mount: cannot open "ubi0:rootfs", error -19 [ 2.631790] VFS: Mounted root (squashfs filesystem) readonly on device 31:14. [ 2.635746] Freeing unused kernel memory: 184K (c06d8000 - c0706000) [ 5.123166] UBIFS error (pid 737): ubifs_mount: cannot open "ubi0:rootfs_data", error -19 [ 5.865180] Loading modules backported from Linux version wt-2016-05-12-0-g7a54796 [ 5.865205] Backport generated by backports.git backports-20160216-0-ge3c56e4 [ 6.328905] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142) [ 6.329457] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 6.464696] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2 [ 6.464749] ath10k_pci 0000:01:00.0: Falling back to user helper [ 6.729646] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002 [ 6.729683] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0 [ 6.739460] ath10k_pci 0000:01:00.0: firmware ver 10.4.1.00030-1 api 5 features no-p2p crc32 d2901e01 [ 7.607397] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 7.724413] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off [ 8.782440] ath10k_pci 0000:01:00.0: unable to read from the device [ 8.782467] ath10k_pci 0000:01:00.0: could not execute otp for board id check: -110 [ 8.787508] ath10k_pci 0000:01:00.0: failed to get board id from otp: -110 [ 8.807501] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002 from ath10k/QCA99X0/hw2.0/board-2.bin [ 8.807675] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 62700264 [ 10.198696] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1 [ 10.260621] ath: EEPROM regdomain: 0x0 [ 10.260641] ath: EEPROM indicates default country code should be used [ 10.260658] ath: doing EEPROM country->regdmn map search [ 10.260680] ath: country maps to regdmn code: 0x3a [ 10.260696] ath: Country alpha2 being used: US [ 10.260712] ath: Regpair used: 0x3a [ 10.272184] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142) [ 10.272994] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 10.404327] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0001:01:00.0.bin failed with error -2 [ 10.404370] ath10k_pci 0001:01:00.0: Falling back to user helper [ 10.415549] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002 [ 10.420088] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0 [ 10.431652] ath10k_pci 0001:01:00.0: firmware ver 10.4.1.00030-1 api 5 features no-p2p crc32 d2901e01 [ 12.472414] ath10k_pci 0001:01:00.0: unable to read from the device [ 12.472441] ath10k_pci 0001:01:00.0: could not execute otp for board id check: -110 [ 12.477482] ath10k_pci 0001:01:00.0: failed to get board id from otp: -110 [ 12.485310] ath10k_pci 0001:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002 from ath10k/QCA99X0/hw2.0/board-2.bin [ 12.492136] ath10k_pci 0001:01:00.0: board_file api 1 bmi_id N/A crc32 62700264 [ 13.900876] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1 [ 13.960310] ath: EEPROM regdomain: 0x0 [ 13.960332] ath: EEPROM indicates default country code should be used [ 13.960348] ath: doing EEPROM country->regdmn map search [ 13.960369] ath: country maps to regdmn code: 0x3a [ 13.960385] ath: Country alpha2 being used: US [ 13.960400] ath: Regpair used: 0x3a [ 16.133478] device br0 entered promiscuous mode [ 16.193194] device vlan1 entered promiscuous mode [ 16.193222] device eth0 entered promiscuous mode [ 16.202167] br0: port 1(vlan1) entered forwarding state [ 16.203293] br0: port 1(vlan1) entered forwarding state [ 16.208377] device br0 left promiscuous mode [ 16.216278] device br0 entered promiscuous mode [ 16.227627] device br0 left promiscuous mode [ 18.202398] br0: port 1(vlan1) entered forwarding state [ 23.735462] device ath0 entered promiscuous mode [ 23.735880] br0: port 2(ath0) entered forwarding state [ 23.739235] br0: port 2(ath0) entered forwarding state [ 25.732619] br0: port 2(ath0) entered forwarding state [ 25.776653] device ath1 entered promiscuous mode [ 25.777089] br0: port 3(ath1) entered forwarding state [ 25.780404] br0: port 3(ath1) entered forwarding state [ 26.167224] device vlan2 entered promiscuous mode [ 26.702450] device vlan2 left promiscuous mode [ 27.775270] br0: port 3(ath1) entered forwarding state [ 77.904384] usbcore: registered new interface driver usbfs [ 77.904894] usbcore: registered new interface driver hub [ 77.909152] usbcore: registered new device driver usb [ 77.937939] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 77.943851] ehci-platform: EHCI generic platform driver [ 77.960868] ehci-pci: EHCI PCI platform driver [ 78.005751] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 78.264031] soc:usb30@0 supply gdsc not found, using dummy regulator [ 78.265539] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 78.269770] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 78.275922] soc:usb30@1 supply gdsc not found, using dummy regulator [ 78.283365] platform 10000000.dwc3: Driver dwc3 requests probe deferral [ 78.289398] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 78.295835] platform 10000000.dwc3: Driver dwc3 requests probe deferral [ 78.321965] 100f8800.phy supply vddcx not found, using dummy regulator [ 78.322073] 100f8800.phy supply v3p3 not found, using dummy regulator [ 78.327544] 100f8800.phy supply v1p8 not found, using dummy regulator [ 78.334017] 100f8800.phy supply vbus not found, using dummy regulator [ 78.340803] 110f8800.phy supply vddcx not found, using dummy regulator [ 78.340916] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 78.341085] platform 10000000.dwc3: Driver dwc3 requests probe deferral [ 78.359807] 110f8800.phy supply v3p3 not found, using dummy regulator [ 78.366678] 110f8800.phy supply v1p8 not found, using dummy regulator [ 78.372976] 110f8800.phy supply vbus not found, using dummy regulator [ 78.379751] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 78.386372] platform 10000000.dwc3: Driver dwc3 requests probe deferral [ 78.390832] 100f8830.phy supply vddcx not found, using dummy regulator [ 78.391009] 100f8830.phy supply v1p8 not found, using dummy regulator [ 78.391087] qcom-dwc3-ssphy 100f8830.phy: cannot get HSIO settings from device node, using default values [ 78.391154] 110f8830.phy supply vddcx not found, using dummy regulator [ 78.391192] 110f8830.phy supply v1p8 not found, using dummy regulator [ 78.391245] qcom-dwc3-ssphy 110f8830.phy: cannot get HSIO settings from device node, using default values [ 78.434776] qcom-dwc3-hsphy 110f8800.phy: cannot set voltage for vddcx [ 78.443958] qcom-dwc3-hsphy 110f8800.phy: cannot set voltage for v3p3 [ 78.450310] qcom-dwc3-hsphy 110f8800.phy: cannot set voltage for v1p8 [ 78.456944] regulator-dummy: operation not allowed [ 78.463407] regulator-dummy: operation not allowed [ 78.470411] qcom-dwc3-ssphy 110f8830.phy: cannot set voltage for vddcx [ 78.713303] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 78.713383] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 78.717865] xhci-hcd xhci-hcd.0.auto: irq 142, io mem 0x11000000 [ 78.726482] hub 1-0:1.0: USB hub found [ 78.731695] hub 1-0:1.0: 1 port detected [ 78.735821] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 78.739134] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 78.745379] hub 2-0:1.0: USB hub found [ 78.754149] hub 2-0:1.0: 1 port detected [ 78.757398] qcom-dwc3-hsphy 100f8800.phy: cannot set voltage for vddcx [ 78.760033] qcom-dwc3-hsphy 100f8800.phy: cannot set voltage for v3p3 [ 78.766496] qcom-dwc3-hsphy 100f8800.phy: cannot set voltage for v1p8 [ 78.772802] regulator-dummy: operation not allowed [ 78.779133] regulator-dummy: operation not allowed [ 78.786378] qcom-dwc3-ssphy 100f8830.phy: cannot set voltage for vddcx [ 79.023055] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 79.023111] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 79.027621] xhci-hcd xhci-hcd.1.auto: irq 237, io mem 0x10000000 [ 79.036529] hub 3-0:1.0: USB hub found [ 79.041263] hub 3-0:1.0: 1 port detected [ 79.045695] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 79.048889] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 79.056307] hub 4-0:1.0: USB hub found [ 79.062114] hub 4-0:1.0: 1 port detected [ 79.062540] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 79.207500] usb 1-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes [ 79.207598] usb 1-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes [ 83.398713] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 83.398791] usb usb4: USB disconnect, device number 1 [ 83.407754] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered [ 83.407895] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 83.413890] usb usb3: USB disconnect, device number 1 [ 83.425125] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered [ 83.425316] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 83.435045] usb usb2: USB disconnect, device number 1 [ 83.447793] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 83.447915] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 83.456554] usb usb1: USB disconnect, device number 1 [ 83.457474] usb 1-1: USB disconnect, device number 2 [ 83.465933] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 83.476834] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 83.476918] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 83.481380] xhci-hcd xhci-hcd.0.auto: irq 142, io mem 0x11000000 [ 83.489936] hub 1-0:1.0: USB hub found [ 83.495424] hub 1-0:1.0: 1 port detected [ 83.499020] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 83.502749] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 83.509052] hub 2-0:1.0: USB hub found [ 83.515822] hub 2-0:1.0: 1 port detected [ 83.519820] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 83.523524] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 83.528884] xhci-hcd xhci-hcd.1.auto: irq 237, io mem 0x10000000 [ 83.537581] hub 3-0:1.0: USB hub found [ 83.542816] hub 3-0:1.0: 1 port detected [ 83.546493] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 83.550150] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 83.556634] hub 4-0:1.0: USB hub found [ 83.563071] hub 4-0:1.0: 1 port detected [ 83.598609] SCSI subsystem initialized [ 83.696554] usbcore: registered new interface driver usb-storage [ 83.783228] libata version 3.00 loaded. [ 83.812445] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 83.871684] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x0 impl platform mode [ 83.871747] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst [ 83.881417] scsi host0: ahci_platform [ 83.888540] ata1: DUMMY [ 83.956450] usb 1-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes [ 83.956500] usb 1-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes [ 83.969028] usb-storage 1-1:1.0: USB Mass Storage device detected [ 83.976308] scsi host1: usb-storage 1-1:1.0 [ 84.973448] scsi 1:0:0:0: Direct-Access LEXAR JUMPDRIVE SECURE 2000 PQ: 0 ANSI: 0 CCS [ 84.978385] sd 1:0:0:0: [sda] 248928 512-byte logical blocks: (127 MB/121 MiB) [ 84.981566] sd 1:0:0:0: [sda] Write Protect is off [ 84.988172] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 84.989571] sd 1:0:0:0: [sda] No Caching mode page found [ 84.992876] sd 1:0:0:0: [sda] Assuming drive cache: write through [ 85.044669] sda: sda1 [ 85.050369] sd 1:0:0:0: [sda] Attached SCSI disk [ 85.331036] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 85.343195] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. root@HOMEWORLD:~# cat /tmp/resolv.conf search mrjcd nameserver 192.168.1.1 root@HOMEWORLD:~# ping mrjcd.com PING mrjcd.com (96.46.208.155): 56 data bytes 64 bytes from 96.46.208.155: seq=0 ttl=64 time=1.299 ms 64 bytes from 96.46.208.155: seq=1 ttl=64 time=1.020 ms 64 bytes from 96.46.208.155: seq=2 ttl=64 time=0.975 ms 64 bytes from 96.46.208.155: seq=3 ttl=64 time=1.003 ms 64 bytes from 96.46.208.155: seq=4 ttl=64 time=1.158 ms 64 bytes from 96.46.208.155: seq=5 ttl=64 time=0.966 ms 64 bytes from 96.46.208.155: seq=6 ttl=64 time=0.970 ms ^C --- mrjcd.com ping statistics --- 7 packets transmitted, 7 packets received, 0% packet loss round-trip min/avg/max = 0.966/1.055/1.299 ms root@HOMEWORLD:~# ping 10.72.29.48 PING 10.72.29.48 (10.72.29.48): 56 data bytes 64 bytes from 10.72.29.48: seq=0 ttl=64 time=16.548 ms 64 bytes from 10.72.29.48: seq=1 ttl=64 time=6.436 ms 64 bytes from 10.72.29.48: seq=2 ttl=64 time=8.403 ms 64 bytes from 10.72.29.48: seq=3 ttl=64 time=6.279 ms 64 bytes from 10.72.29.48: seq=4 ttl=64 time=7.498 ms 64 bytes from 10.72.29.48: seq=5 ttl=64 time=14.964 ms 64 bytes from 10.72.29.48: seq=6 ttl=64 time=4.347 ms 64 bytes from 10.72.29.48: seq=7 ttl=64 time=4.407 ms 64 bytes from 10.72.29.48: seq=8 ttl=64 time=7.123 ms 64 bytes from 10.72.29.48: seq=9 ttl=64 time=6.812 ms 64 bytes from 10.72.29.48: seq=10 ttl=64 time=8.249 ms 64 bytes from 10.72.29.48: seq=11 ttl=64 time=7.967 ms 64 bytes from 10.72.29.48: seq=12 ttl=64 time=4.498 ms ^C --- 10.72.29.48 ping statistics --- 13 packets transmitted, 13 packets received, 0% packet loss round-trip min/avg/max = 4.347/7.963/16.548 ms root@HOMEWORLD:~# ping 10.72.28.13 PING 10.72.28.13 (10.72.28.13): 56 data bytes 64 bytes from 10.72.28.13: seq=0 ttl=64 time=1.666 ms 64 bytes from 10.72.28.13: seq=1 ttl=64 time=0.863 ms 64 bytes from 10.72.28.13: seq=2 ttl=64 time=0.999 ms 64 bytes from 10.72.28.13: seq=3 ttl=64 time=3.757 ms 64 bytes from 10.72.28.13: seq=4 ttl=64 time=0.815 ms 64 bytes from 10.72.28.13: seq=5 ttl=64 time=1.005 ms 64 bytes from 10.72.28.13: seq=6 ttl=64 time=0.974 ms 64 bytes from 10.72.28.13: seq=7 ttl=64 time=0.907 ms 64 bytes from 10.72.28.13: seq=8 ttl=64 time=0.906 ms 64 bytes from 10.72.28.13: seq=9 ttl=64 time=0.970 ms 64 bytes from 10.72.28.13: seq=10 ttl=64 time=0.907 ms ^C --- 10.72.28.13 ping statistics --- 11 packets transmitted, 11 packets received, 0% packet loss round-trip min/avg/max = 0.815/1.251/3.757 ms root@HOMEWORLD:~# ping 10.72.29.57 PING 10.72.29.57 (10.72.29.57): 56 data bytes 64 bytes from 10.72.29.57: seq=0 ttl=64 time=1.848 ms 64 bytes from 10.72.29.57: seq=1 ttl=64 time=0.735 ms 64 bytes from 10.72.29.57: seq=2 ttl=64 time=0.960 ms 64 bytes from 10.72.29.57: seq=3 ttl=64 time=0.903 ms 64 bytes from 10.72.29.57: seq=4 ttl=64 time=1.738 ms 64 bytes from 10.72.29.57: seq=5 ttl=64 time=0.920 ms 64 bytes from 10.72.29.57: seq=6 ttl=64 time=0.904 ms 64 bytes from 10.72.29.57: seq=7 ttl=64 time=0.902 ms 64 bytes from 10.72.29.57: seq=8 ttl=64 time=0.807 ms 64 bytes from 10.72.29.57: seq=9 ttl=64 time=0.741 ms 64 bytes from 10.72.29.57: seq=10 ttl=64 time=0.832 ms ^C --- 10.72.29.57 ping statistics --- 11 packets transmitted, 11 packets received, 0% packet loss round-trip min/avg/max = 0.735/1.026/1.848 ms root@HOMEWORLD:~# ping 10.72.29.55 PING 10.72.29.55 (10.72.29.55): 56 data bytes 64 bytes from 10.72.29.55: seq=0 ttl=64 time=13.358 ms 64 bytes from 10.72.29.55: seq=1 ttl=64 time=0.938 ms 64 bytes from 10.72.29.55: seq=2 ttl=64 time=1.197 ms 64 bytes from 10.72.29.55: seq=3 ttl=64 time=1.244 ms 64 bytes from 10.72.29.55: seq=4 ttl=64 time=1.123 ms 64 bytes from 10.72.29.55: seq=5 ttl=64 time=1.058 ms 64 bytes from 10.72.29.55: seq=6 ttl=64 time=1.183 ms 64 bytes from 10.72.29.55: seq=7 ttl=64 time=1.155 ms 64 bytes from 10.72.29.55: seq=8 ttl=64 time=1.170 ms 64 bytes from 10.72.29.55: seq=9 ttl=64 time=1.151 ms 64 bytes from 10.72.29.55: seq=10 ttl=64 time=1.149 ms 64 bytes from 10.72.29.55: seq=11 ttl=64 time=1.326 ms ^C --- 10.72.29.55 ping statistics --- 12 packets transmitted, 12 packets received, 0% packet loss round-trip min/avg/max = 0.938/2.171/13.358 ms root@HOMEWORLD:~# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 10.72.28.13 0.0.0.0 UG 0 0 0 vlan2 10.72.28.0 0.0.0.0 255.255.254.0 U 0 0 0 vlan2 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 br0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 root@HOMEWORLD:~# uptime 18:08:43 up 21 min, load average: 0.02, 0.02, 0.00 root@HOMEWORLD:~# exit Connection closed by foreign host.