# EA8500 ... seems OK :-) da-Box:~ mrjcd$ ssh root@---.mrjcd DD-WRT v3.0-r30771 std (c) 2016 NewMedia-NET GmbH Release: 10/18/16 root@---.mrjcd's password: ========================================================== ___ ___ _ _____ ______ ____ ___ / _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \ / // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // / /____/____/ |__/|__/_/|_| /_/ |___/____(_)___/ DD-WRT v3.0 http://www.dd-wrt.com ========================================================== BusyBox v1.24.2 (2016-10-18 00:38:47 CEST) built-in shell (ash) root@---:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.18.42 (root@seg-desktop) (gcc version 6.1.0 (LEDE GCC 6.1.0 r1009) ) #108 SMP PREEMPT Fri Oct 14 01:03:03 CEST 2016 [ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Linksys EA8500 WiFi Router [ 0.000000] Ignoring memory range 0x41500000 - 0x42000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 122880 [ 0.000000] free_area_init_node: node 0, pgdat c071c800, node_mem_map ddb40000 [ 0.000000] Normal zone: 960 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 122880 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 9 pages/cpu @ddfd3000 s7552 r8192 d21120 u36864 [ 0.000000] pcpu-alloc: s7552 r8192 d21120 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920 [ 0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:14 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 481240K/491520K available (3850K kernel code, 279K rwdata, 1104K rodata, 180K init, 403K bss, 10280K reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xde800000 - 0xff000000 ( 520 MB) [ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc06dee1c (4956 kB) [ 0.000000] .init : 0xc06df000 - 0xc070c000 ( 180 kB) [ 0.000000] .data : 0xc070c000 - 0xc0751d04 ( 280 kB) [ 0.000000] .bss : 0xc0751d04 - 0xc07b6b84 ( 404 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000012] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 687194767200ns [ 0.000027] Switching to timer-based delay loop, resolution 160ns [ 0.000434] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500) [ 0.000456] pid_max: default: 32768 minimum: 301 [ 0.000702] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000719] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001360] CPU: Testing write buffer coherency: ok [ 0.001625] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002110] Setting up static identity map for 0x42213180 - 0x422131d8 [ 0.063436] CPU1: Booted secondary processor [ 0.063567] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.063681] Brought up 2 CPUs [ 0.063706] SMP: Total of 2 processors activated (25.00 BogoMIPS). [ 0.063718] CPU: All CPU(s) started in SVC mode. [ 0.078424] VFP support v0.3: implementor 51 architecture 0 part 4d variant 2 rev 0 [ 0.078962] pinctrl core: initialized pinctrl subsystem [ 0.089540] NET: Registered protocol family 16 [ 0.089865] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.113853] cpuidle: using governor ladder [ 0.144867] cpuidle: using governor menu [ 0.164178] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342 [ 0.164245] qcom_rpm 108000.rpm: failed to mark ack irq as wakeup [ 0.164304] qcom_rpm 108000.rpm: failed to mark wakeup irq as wakeup [ 0.199472] pps_core: LinuxPPS API ver. 1 registered [ 0.199486] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.199525] PTP clock support registered [ 0.200644] pcie_init: pcie_init: unable to create IPC log context for pcie0-short [ 0.200658] pcie_init: pcie_init: unable to create IPC log context for pcie0-long [ 0.200669] pcie_init: pcie_init: unable to create IPC log context for pcie1-short [ 0.200679] pcie_init: pcie_init: unable to create IPC log context for pcie1-long [ 0.201076] Switched to clocksource dg_timer [ 0.202485] NET: Registered protocol family 2 [ 0.203181] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.203221] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.203275] TCP: Hash tables configured (established 4096 bind 4096) [ 0.203321] TCP: reno registered [ 0.203341] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.203363] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.203599] NET: Registered protocol family 1 [ 0.203671] PCI: CLS 0 bytes, default 64 [ 0.204807] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.204906] Crashlog allocated RAM at address 0x5ff00000 [ 0.205789] squashfs: version 3.0 (2006/03/15) Phillip Lougher [ 0.205828] msgmni has been set to 939 [ 0.208173] io scheduler noop registered [ 0.208197] io scheduler deadline registered (default) [ 0.209578] 1b500000.pci supply vdda not found, using dummy regulator [ 0.209663] 1b500000.pci supply vdda_phy not found, using dummy regulator [ 0.209741] 1b500000.pci supply vdda_refclk not found, using dummy regulator [ 0.240754] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00 [ 0.240777] pci_bus 0000:00: root bus resource [io 0xfe00000-0xfffff] (bus address [0x1fc00000-0xfefffff]) [ 0.240793] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff] [ 0.240809] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.240857] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400 [ 0.240996] pci 0000:00:00.0: supports D1 [ 0.241010] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 0.241403] PCI: bus0: Fast back to back transfers disabled [ 0.241740] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000 [ 0.241943] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 0.242887] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.243315] PCI: bus1: Fast back to back transfers disabled [ 0.243336] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.243492] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff] [ 0.243515] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit] [ 0.243626] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.243649] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff] [ 0.244100] aer 0000:00:00.0:pcie02: service driver aer loaded [ 0.244441] 1b700000.pci supply vdda not found, using dummy regulator [ 0.244527] 1b700000.pci supply vdda_phy not found, using dummy regulator [ 0.244610] 1b700000.pci supply vdda_refclk not found, using dummy regulator [ 0.274854] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00 [ 0.274874] pci_bus 0001:00: root bus resource [io 0x31e10000-0xfffff] (bus address [0x63c00000-0x31eeffff]) [ 0.274890] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff] [ 0.274906] pci_bus 0001:00: root bus resource [bus 00-ff] [ 0.274949] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400 [ 0.275068] pci 0001:00:00.0: supports D1 [ 0.275082] pci 0001:00:00.0: PME# supported from D0 D1 D3hot [ 0.275380] PCI: bus0: Fast back to back transfers disabled [ 0.275702] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000 [ 0.275901] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 0.276841] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold [ 0.277262] PCI: bus1: Fast back to back transfers disabled [ 0.277281] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.277498] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff] [ 0.277520] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit] [ 0.277628] pci 0001:00:00.0: PCI bridge to [bus 01] [ 0.277646] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff] [ 0.278045] aer 0001:00:00.0:pcie02: service driver aer loaded [ 0.278385] 1b900000.pci supply vdda not found, using dummy regulator [ 0.278469] 1b900000.pci supply vdda_phy not found, using dummy regulator [ 0.278544] 1b900000.pci supply vdda_refclk not found, using dummy regulator [ 0.413371] qcom-pcie 1b900000.pci: link initialization failed [ 0.415464] qcom-pcie 1b900000.pci: PCI host bridge to bus 0002:00 [ 0.415484] pci_bus 0002:00: root bus resource [io 0x35e20000-0xfffff] (bus address [0x6bc00000-0x35edffff]) [ 0.415500] pci_bus 0002:00: root bus resource [mem 0x32000000-0x35dfffff] [ 0.415516] pci_bus 0002:00: root bus resource [bus 00-ff] [ 0.415566] PCI: bus0: Fast back to back transfers enabled [ 0.418109] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0 [ 0.419420] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.420409] msm_serial 16340000.serial: msm_serial: detected port #0 [ 0.420506] msm_serial 16340000.serial: uartclk = 1843200 [ 0.420569] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 184, base_baud = 115200) is a MSM [ 0.420623] msm_serial: console setup on port #0 [ 1.132758] console [ttyMSM0] enabled [ 1.137520] msm_serial: driver initialized [ 1.144395] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1 [ 1.144809] nand: AMD/Spansion S34MS01G2 [ 1.151385] nand: 128MiB, SLC, page size: 2048, OOB size: 64 [ 1.155230] Scanning device for bad blocks [ 1.597730] random: nonblocking pool is initialized [ 1.902149] 19 ofpart partitions found on MTD device qcom-nandc [ 1.902177] Creating 19 MTD partitions on "qcom-nandc": [ 1.906874] 0x000000000000-0x000000040000 : "SBL1" [ 1.913057] 0x000000040000-0x000000180000 : "MIBIB" [ 1.917726] 0x000000180000-0x0000002c0000 : "SBL2" [ 1.922544] 0x0000002c0000-0x000000540000 : "SBL3" [ 1.927329] 0x000000540000-0x000000660000 : "DDRCONFIG" [ 1.932194] 0x000000660000-0x000000780000 : "SSD" [ 1.937231] 0x000000780000-0x000000a00000 : "TZ" [ 1.942163] 0x000000a00000-0x000000c80000 : "RPM" [ 1.946808] 0x000000c80000-0x000000dc0000 : "art" [ 1.951474] 0x000000dc0000-0x000000ec0000 : "APPSBL" [ 1.956088] 0x000000ec0000-0x000000f00000 : "u_env" [ 1.961126] 0x000000f00000-0x000000f40000 : "s_env" [ 1.965831] 0x000000f40000-0x000000f80000 : "devinfo" [ 1.970570] 0x000000f80000-0x000003780000 : "linux" [ 1.975901] 0x000001280000-0x000003780000 : "rootfs" [ 1.980506] mtd: partition "rootfs" set to be root filesystem [ 1.985004] 0x000003780000-0x000005f40000 : "linux2" [ 1.991439] 0x000003a80000-0x000005f40000 : "rootfs2" [ 1.996410] 0x000005f40000-0x000005f80000 : "nvram" [ 2.001324] 0x000005f80000-0x000008000000 : "ddwrt" [ 2.007335] IMQ: autocreate imq0 NS c074bfc0 [ 2.010624] IMQ: autocreate imq1 NS c074bfc0 [ 2.014679] IMQ driver loaded successfully. (numdevs = 16, numqueues = 1) [ 2.018936] Hooking IMQ after NAT on PREROUTING. [ 2.025785] Hooking IMQ before NAT on POSTROUTING. [ 2.030725] libphy: Fixed MDIO Bus: probed [ 2.035571] libphy: GPIO Bitbanged MDIO: probed [ 2.059493] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0 [ 2.265871] tun: Universal TUN/TAP device driver, 1.6 [ 2.265896] tun: (C) 1999-2004 Max Krasnyansky [ 2.271440] stmmac - user ID: 0x10, Synopsys ID: 0x37 [ 2.275972] Ring mode enabled [ 2.281091] DMA HW capability register supported [ 2.284117] Enhanced/Alternate descriptors [ 2.288815] Enabled extended descriptors [ 2.292890] RX Checksum Offload Engine supported (type 2) [ 2.296977] TX Checksum insertion supported [ 2.302432] Wake-Up On Lan supported [ 2.306847] Enable RX Mitigation via HW Watchdog Timer [ 2.311642] stmmac - user ID: 0x10, Synopsys ID: 0x37 [ 2.315383] Ring mode enabled [ 2.320586] DMA HW capability register supported [ 2.323642] Enhanced/Alternate descriptors [ 2.328313] Enabled extended descriptors [ 2.332382] RX Checksum Offload Engine supported (type 2) [ 2.336475] TX Checksum insertion supported [ 2.341951] Wake-Up On Lan supported [ 2.346339] Enable RX Mitigation via HW Watchdog Timer [ 2.350520] PPP generic driver version 2.4.2 [ 2.355106] PPP BSD Compression module registered [ 2.359400] PPP Deflate Compression module registered [ 2.364075] PPP MPPE Compression module registered [ 2.369044] NET: Registered protocol family 24 [ 2.373839] PPTP driver version 0.8.5 [ 2.378276] i2c /dev entries driver [ 2.387584] Speed bin: 0 [ 2.387606] PVS bin: 1 [ 2.389604] platform cpufreq-krait.0: Driver cpufreq-krait requests probe deferral [ 2.393404] L2 @ QSB rate. Forcing new rate. [ 2.399136] L2 @ 387500 KHz [ 2.403543] CPU0 @ 800000 KHz [ 2.405845] CPU1 @ QSB rate. Forcing new rate. [ 2.409053] CPU1 @ 384000 KHz [ 2.413695] GACT probability NOT on [ 2.416368] Mirror/redirect action on [ 2.419697] Simple TC action Loaded [ 2.424396] netem: version 1.3 [ 2.426810] u32 classifier [ 2.429887] Performance counters on [ 2.432658] input device check on [ 2.436314] Actions configured [ 2.440173] Netfilter messages via NETLINK v0.30. [ 2.443563] nf_conntrack version 0.5.0 (7519 buckets, 30076 max) [ 2.448530] nf_conntrack_rtsp v0.7 loading [ 2.454874] xt_time: kernel timezone is -0000 [ 2.458212] ip_set: protocol 6 [ 2.462991] gre: GRE over IPv4 demultiplexor driver [ 2.465816] nf_nat_rtsp v0.7 loading [ 2.470390] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.474496] TCP: bic registered [ 2.479465] TCP: cubic registered [ 2.482403] TCP: westwood registered [ 2.485803] TCP: highspeed registered [ 2.489449] TCP: hybla registered [ 2.493086] TCP: htcp registered [ 2.496305] TCP: vegas registered [ 2.499606] TCP: veno registered [ 2.502896] TCP: scalable registered [ 2.506115] TCP: lp registered [ 2.509674] TCP: yeah registered [ 2.512610] TCP: illinois registered [ 2.515931] NET: Registered protocol family 17 [ 2.519561] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 2.523859] Bridge firewalling registered [ 2.536574] 8021q: 802.1Q VLAN Support v1.8 [ 2.540527] Registering SWP/SWPB emulation handler [ 2.548370] trying to register driver generic_krait [ 2.549267] Frequency table not initialized. [ 2.554244] Frequency table not initialized. [ 2.558574] Frequency table not initialized. [ 2.562867] Frequency table not initialized. [ 2.567045] Frequency table not initialized. [ 2.572892] Frequency table not initialized. [ 2.575609] Frequency table not initialized. [ 2.579818] Frequency table not initialized. [ 2.584105] Frequency table not initialized. [ 2.588309] Frequency table not initialized. [ 2.592649] driver generic_krait up and running [ 2.596859] searching for nvram [ 2.601093] nvram size = -1066988274 [ 2.624481] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.632275] UBIFS error (pid 1): ubifs_mount: cannot open "ubi0:rootfs", error -19 [ 2.634962] VFS: Mounted root (squashfs filesystem) readonly on device 31:14. [ 2.638895] Freeing unused kernel memory: 180K (c06df000 - c070c000) [ 4.933616] UBIFS error (pid 735): ubifs_mount: cannot open "ubi0:rootfs_data", error -19 [ 5.595007] Loading modules backported from Linux version wt-2016-10-03-1-g6fcb1a6 [ 5.595038] Backport generated by backports.git backports-20160324-9-g0e38f5c [ 6.071674] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142) [ 6.072265] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 6.203398] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2 [ 6.203441] ath10k_pci 0000:01:00.0: Falling back to user helper [ 6.520790] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002 [ 6.520838] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0 [ 6.532471] ath10k_pci 0000:01:00.0: firmware ver 10.4.3.00063 api 5 features no-p2p,peer-flow-ctrl crc32 a0d385ce [ 6.548201] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002 from ath10k/QCA99X0/hw2.0/board-2.bin [ 6.548397] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 62700264 [ 7.410176] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 7.513734] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off [ 7.738597] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1 [ 7.796497] ath: EEPROM regdomain: 0x0 [ 7.796513] ath: EEPROM indicates default country code should be used [ 7.796524] ath: doing EEPROM country->regdmn map search [ 7.796540] ath: country maps to regdmn code: 0x3a [ 7.796552] ath: Country alpha2 being used: US [ 7.796563] ath: Regpair used: 0x3a [ 7.805637] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142) [ 7.806230] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 7.933432] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0001:01:00.0.bin failed with error -2 [ 7.933476] ath10k_pci 0001:01:00.0: Falling back to user helper [ 7.944882] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002 [ 7.949196] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0 [ 7.961596] ath10k_pci 0001:01:00.0: firmware ver 10.4.3.00063 api 5 features no-p2p,peer-flow-ctrl crc32 a0d385ce [ 7.966636] ath10k_pci 0001:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002 from ath10k/QCA99X0/hw2.0/board-2.bin [ 7.976928] ath10k_pci 0001:01:00.0: board_file api 1 bmi_id N/A crc32 62700264 [ 9.166201] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1 [ 9.226895] ath: EEPROM regdomain: 0x0 [ 9.226909] ath: EEPROM indicates default country code should be used [ 9.226919] ath: doing EEPROM country->regdmn map search [ 9.226935] ath: country maps to regdmn code: 0x3a [ 9.226947] ath: Country alpha2 being used: US [ 9.226957] ath: Regpair used: 0x3a [ 9.393275] usbcore: registered new interface driver usbfs [ 9.393841] usbcore: registered new interface driver hub [ 9.397933] usbcore: registered new device driver usb [ 9.459853] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 9.467448] ehci-platform: EHCI generic platform driver [ 9.483605] ehci-pci: EHCI PCI platform driver [ 9.531539] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 9.721800] soc:usb30@0 supply gdsc not found, using dummy regulator [ 9.722561] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 9.727295] soc:usb30@1 supply gdsc not found, using dummy regulator [ 9.727440] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 9.740828] platform 10000000.dwc3: Driver dwc3 requests probe deferral [ 9.746791] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 9.753981] platform 10000000.dwc3: Driver dwc3 requests probe deferral [ 9.760513] 100f8800.phy supply vddcx not found, using dummy regulator [ 9.766471] 100f8800.phy supply v3p3 not found, using dummy regulator [ 9.773102] 100f8800.phy supply v1p8 not found, using dummy regulator [ 9.779461] 100f8800.phy supply vbus not found, using dummy regulator [ 9.786016] 110f8800.phy supply vddcx not found, using dummy regulator [ 9.786148] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 9.786308] platform 10000000.dwc3: Driver dwc3 requests probe deferral [ 9.805291] 110f8800.phy supply v3p3 not found, using dummy regulator [ 9.811888] 110f8800.phy supply v1p8 not found, using dummy regulator [ 9.818410] 110f8800.phy supply vbus not found, using dummy regulator [ 9.825088] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 9.832106] platform 10000000.dwc3: Driver dwc3 requests probe deferral [ 9.837680] 100f8830.phy supply vddcx not found, using dummy regulator [ 9.844346] 100f8830.phy supply v1p8 not found, using dummy regulator [ 9.850920] qcom-dwc3-ssphy 100f8830.phy: cannot get HSIO settings from device node, using default values [ 9.857506] 110f8830.phy supply vddcx not found, using dummy regulator [ 9.857714] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 9.858044] qcom-dwc3-hsphy 100f8800.phy: cannot set voltage for vddcx [ 9.858054] qcom-dwc3-hsphy 100f8800.phy: cannot set voltage for v3p3 [ 9.858062] qcom-dwc3-hsphy 100f8800.phy: cannot set voltage for v1p8 [ 9.860506] qcom-dwc3-ssphy 100f8830.phy: cannot set voltage for vddcx [ 9.899478] 110f8830.phy supply v1p8 not found, using dummy regulator [ 9.905917] qcom-dwc3-ssphy 110f8830.phy: cannot get HSIO settings from device node, using default values [ 10.102719] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 10.102818] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 10.107364] xhci-hcd xhci-hcd.0.auto: irq 237, io mem 0x10000000 [ 10.116268] hub 1-0:1.0: USB hub found [ 10.123027] hub 1-0:1.0: 1 port detected [ 10.125232] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 10.128553] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 10.135355] hub 2-0:1.0: USB hub found [ 10.141666] hub 2-0:1.0: 1 port detected [ 10.146182] qcom-dwc3-hsphy 110f8800.phy: cannot set voltage for vddcx [ 10.149286] qcom-dwc3-hsphy 110f8800.phy: cannot set voltage for v3p3 [ 10.155890] qcom-dwc3-hsphy 110f8800.phy: cannot set voltage for v1p8 [ 10.164686] qcom-dwc3-ssphy 110f8830.phy: cannot set voltage for vddcx [ 10.412581] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 10.412632] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 10.417135] xhci-hcd xhci-hcd.1.auto: irq 142, io mem 0x11000000 [ 10.425425] hub 3-0:1.0: USB hub found [ 10.430984] hub 3-0:1.0: 1 port detected [ 10.435074] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 10.438410] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 10.444600] hub 4-0:1.0: USB hub found [ 10.451672] hub 4-0:1.0: 1 port detected [ 10.752775] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 14.922714] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 14.922794] usb usb4: USB disconnect, device number 1 [ 14.929516] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered [ 14.932037] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 14.937564] usb usb3: USB disconnect, device number 1 [ 14.949545] usb 3-1: USB disconnect, device number 2 [ 14.956883] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered [ 14.956975] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 14.963112] usb usb2: USB disconnect, device number 1 [ 14.967925] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 14.975143] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 14.977333] usb usb1: USB disconnect, device number 1 [ 14.983578] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 14.995070] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 14.995170] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 14.999643] xhci-hcd xhci-hcd.0.auto: irq 237, io mem 0x10000000 [ 15.008072] hub 1-0:1.0: USB hub found [ 15.013444] hub 1-0:1.0: 1 port detected [ 15.017378] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 15.020914] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 15.027307] hub 2-0:1.0: USB hub found [ 15.033873] hub 2-0:1.0: 1 port detected [ 15.038176] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 15.041779] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 15.047139] xhci-hcd xhci-hcd.1.auto: irq 142, io mem 0x11000000 [ 15.055704] hub 3-0:1.0: USB hub found [ 15.061056] hub 3-0:1.0: 1 port detected [ 15.064801] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 15.068390] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 15.074523] hub 4-0:1.0: USB hub found [ 15.081244] hub 4-0:1.0: 1 port detected [ 15.116614] SCSI subsystem initialized [ 15.204934] usbcore: registered new interface driver usb-storage [ 15.271014] libata version 3.00 loaded. [ 15.377158] ahci 29000000.sata: forcing port_map 0x0 -> 0x1 [ 15.377237] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 15.381663] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 15.390290] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst [ 15.398249] scsi host0: ahci_platform [ 15.405679] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 241 [ 15.535504] usb-storage 3-1:1.0: USB Mass Storage device detected [ 15.535963] scsi host1: usb-storage 3-1:1.0 [ 15.741497] ata1: SATA link down (SStatus 0 SControl 300) [ 16.536080] scsi 1:0:0:0: Direct-Access PNY USB 2.0 FD 0.00 PQ: 0 ANSI: 2 [ 16.540020] sd 1:0:0:0: [sda] 31711232 512-byte logical blocks: (16.2 GB/15.1 GiB) [ 16.544052] sd 1:0:0:0: [sda] Write Protect is off [ 16.550640] sd 1:0:0:0: [sda] Mode Sense: 00 00 00 00 [ 16.551070] sd 1:0:0:0: [sda] Asking for cache data failed [ 16.555628] sd 1:0:0:0: [sda] Assuming drive cache: write through [ 16.564417] sda: sda1 [ 16.578445] sd 1:0:0:0: [sda] Attached SCSI removable disk [ 16.847756] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 16.856627] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 17.690781] device br0 entered promiscuous mode [ 17.770894] device vlan1 entered promiscuous mode [ 17.770924] device eth0 entered promiscuous mode [ 17.774755] br0: port 1(vlan1) entered forwarding state [ 17.779293] br0: port 1(vlan1) entered forwarding state [ 17.791365] device br0 left promiscuous mode [ 17.794540] device br0 entered promiscuous mode [ 17.847577] device br0 left promiscuous mode [ 19.771460] br0: port 1(vlan1) entered forwarding state [ 23.666634] device ath0 entered promiscuous mode [ 26.925717] br0: port 2(ath0) entered forwarding state [ 26.925795] br0: port 2(ath0) entered forwarding state [ 28.457736] device ath1 entered promiscuous mode [ 28.921456] br0: port 2(ath0) entered forwarding state [ 29.206593] br0: port 3(ath1) entered forwarding state [ 29.206630] br0: port 3(ath1) entered forwarding state [ 29.709114] device vlan2 entered promiscuous mode [ 30.615939] device vlan2 left promiscuous mode [ 31.211444] br0: port 3(ath1) entered forwarding state root@---:~# ps PID USER VSZ STAT COMMAND 1 root 1292 S /sbin/init 2 root 0 SW [kthreadd] 3 root 0 SW [ksoftirqd/0] 5 root 0 SW< [kworker/0:0H] 6 root 0 SW [kworker/u4:0] 7 root 0 SW [rcu_preempt] 8 root 0 SW [rcu_sched] 9 root 0 SW [rcu_bh] 10 root 0 SW [migration/0] 11 root 0 SW [migration/1] 12 root 0 SW [ksoftirqd/1] 14 root 0 SW< [kworker/1:0H] 15 root 0 SW< [khelper] 16 root 0 SW< [writeback] 18 root 0 SW< [crypto] 19 root 0 SW< [bioset] 20 root 0 SW< [kblockd] 21 root 0 SW [kswapd0] 22 root 0 SW [fsnotify_mark] 31 root 0 SW [kworker/u4:1] 43 root 0 SW< [deferwq] 44 root 0 SW [kworker/0:2] 45 root 0 SW [kworker/1:2] 714 root 692 S /sbin/hotplug2 --set-rules-file /etc/hotplug2.rules 773 root 0 SW< [cfg80211] 784 root 0 SW< [ath10k_wq] 785 root 0 SW< [ath10k_aux_wq] 788 root 0 SW< [ath10k_wq] 789 root 0 SW< [ath10k_aux_wq] 892 root 0 SW< [ata_sff] 897 root 0 SW [scsi_eh_0] 898 root 0 SW< [scsi_tmf_0] 899 root 0 SW [scsi_eh_1] 901 root 0 SW< [scsi_tmf_1] 902 root 0 SW [usb-storage] 1105 root 0 SW< [kworker/0:1H] 1106 root 0 SW< [kworker/1:1H] 1108 root 2816 S /usr/sbin/smbd -D --configfile=/tmp/smb.conf 1110 root 2604 S /usr/sbin/nmbd -D --configfile=/tmp/smb.conf 1132 root 2192 S hostapd -B -P /var/run/ath0_hostapd.pid /tmp/ath0_ho 1157 root 2192 S hostapd -B -P /var/run/ath1_hostapd.pid /tmp/ath1_ho 1244 root 1072 S telnetd 1299 root 788 S dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_h 1309 root 840 S dnsmasq -u root -g root --conf-file=/tmp/dnsmasq.con 1598 root 1444 S ttraff 1744 root 1072 S syslogd -L 1751 root 1500 S resetbutton 1755 root 1072 S klogd 2076 root 3788 S httpd -p 80 2793 root 668 S cron 3620 root 1072 S udhcpc -i vlan2 -p /var/run/udhcpc.pid -s /tmp/udhcp 3815 root 7100 D unbound -c /tmp/unbound.conf 4052 root 1288 S process_monitor 4266 root 1408 S upnp -D -W vlan2 4817 root 1528 S wland 6417 root 0 SW [kworker/0:1] 7432 root 0 SW [kworker/1:1] 8592 root 0 SW [kworker/0:0] 8697 root 0 SW [kworker/1:0] 8700 root 860 R dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_h 8720 root 1076 S -sh 8725 root 1072 R ps 8728 root 0 SW [kworker/u4:1] 8729 root 1076 R /sbin/modprobe -q -- net-pf-10 root@---:~# uptime 19:02:36 up 16 min, load average: 0.00, 0.04, 0.03 root@---:~# exit Connection to ---.mrjcd closed. da-Box:~ mrjcd$ exit logout [Process completed]