Linksys WRT160NL

DD-WRT v3.0-r27506 std (c) 2015 NewMedia-NET GmbH

Release: 07/09/15

<0>[ 0.300000] found squashfs at 193000

<5>[ 0.310000] Creating 8 MTD partitions on "ar7100-nor0":

<5>[ 0.310000] 0x000000000000-0x000000040000 : "RedBoot"

<5>[ 0.320000] 0x000000040000-0x0000007e0000 : "linux"

<5>[ 0.330000] 0x000000193000-0x000000790000 : "rootfs"

<4>[ 0.330000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only

<5>[ 0.350000] mtd: partition "rootfs" set to be root filesystem

<5>[ 0.350000] 0x000000790000-0x0000007e0000 : "ddwrt"

<5>[ 0.360000] 0x0000007e0000-0x0000007f0000 : "nvram"

<5>[ 0.360000] 0x0000007f0000-0x000000800000 : "FIS directory"

<5>[ 0.370000] 0x0000007f0000-0x000000800000 : "board_config"

<5>[ 0.380000] 0x000000000000-0x000000800000 : "fullflash"

<4>[ 0.390000] ->Oops: flash id 0xc22017 .


###############


DD-WRT v3.0-r37405 std (c) 2018 NewMedia-NET GmbH

Release: 10/16/18

BusyBox v1.29.3 (2018-10-16 03:07:04 CEST) built-in shell (ash)

<0>[ 0.300000] found squashfs at 191000

<5>[ 0.310000] Creating 8 MTD partitions on "ar7100-nor0":

<5>[ 0.310000] 0x000000000000-0x000000040000 : "RedBoot"

<5>[ 0.320000] 0x000000040000-0x0000007e0000 : "linux"

<5>[ 0.330000] 0x000000191000-0x000000790000 : "rootfs"

<4>[ 0.330000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only

<5>[ 0.350000] mtd: partition "rootfs" set to be root filesystem

<5>[ 0.350000] 0x000000790000-0x0000007e0000 : "ddwrt"

<5>[ 0.360000] 0x0000007e0000-0x0000007f0000 : "nvram"

<5>[ 0.360000] 0x0000007f0000-0x000000800000 : "FIS directory"

<5>[ 0.370000] 0x0000007f0000-0x000000800000 : "board_config"

<5>[ 0.380000] 0x000000000000-0x000000800000 : "fullflash"

<4>[ 0.390000] ->Oops: flash id 0x1c2017 .


################################################


Linksys E2100L

DD-WRT v3.0-r27506 std (c) 2015 NewMedia-NET GmbH

Release: 07/09/15

BusyBox v1.23.2 (2015-07-09 01:57:54 CEST) built-in shell (ash)

<0>[ 0.300000] found squashfs at 193000

<5>[ 0.310000] Creating 8 MTD partitions on "ar7100-nor0":

<5>[ 0.310000] 0x000000000000-0x000000040000 : "RedBoot"

<5>[ 0.320000] 0x000000040000-0x0000007e0000 : "linux"

<5>[ 0.330000] 0x000000193000-0x000000790000 : "rootfs"

<4>[ 0.330000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only

<5>[ 0.350000] mtd: partition "rootfs" set to be root filesystem

<5>[ 0.350000] 0x000000790000-0x0000007e0000 : "ddwrt"

<5>[ 0.360000] 0x0000007e0000-0x0000007f0000 : "nvram"

<5>[ 0.370000] 0x0000007f0000-0x000000800000 : "FIS directory"

<5>[ 0.370000] 0x0000007f0000-0x000000800000 : "board_config"

<5>[ 0.380000] 0x000000000000-0x000000800000 : "fullflash"

<4>[ 0.390000] ->Oops: flash id 0xc22017 .