root@160NL-WDS-South:~# dmesg <5>[ 0.000000] Linux version 3.10.87 (root@dd-wrt) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 r46799) ) #8599 Mon Sep 7 03:51:03 CEST 2015 <4>[ 0.000000] flash_size passed from bootloader = 8 <6>[ 0.000000] bootconsole [early0] enabled <6>[ 0.000000] CPU revision is: 00019374 (MIPS 24Kc) <6>[ 0.000000] booting platform Atheros AR9130 rev 2 (0xb8) <6>[ 0.000000] Determined physical RAM map: <6>[ 0.000000] memory: 02000000 @ 00000000 (usable) <4>[ 0.000000] Zone ranges: <4>[ 0.000000] Normal [mem 0x00000000-0x01ffffff] <4>[ 0.000000] Movable zone start for each node <4>[ 0.000000] Early memory node ranges <4>[ 0.000000] node 0: [mem 0x00000000-0x01ffffff] <7>[ 0.000000] On node 0 totalpages: 8192 <7>[ 0.000000] free_area_init_node: node 0, pgdat 802f6fa0, node_mem_map 81000000 <7>[ 0.000000] Normal zone: 64 pages used for memmap <7>[ 0.000000] Normal zone: 0 pages reserved <7>[ 0.000000] Normal zone: 8192 pages, LIFO batch:0 <4>[ 0.000000] Primary instruction cache 64kB, 4-way, VIPT, I-cache aliases, linesize 32 bytes. <4>[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes <7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 <7>[ 0.000000] pcpu-alloc: [0] 0 <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 <5>[ 0.000000] Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd init=/sbin/init <6>[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) <6>[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) <6>[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) <6>[ 0.000000] Writing ErrCtl register=00000000 <6>[ 0.000000] Readback ErrCtl register=00000000 <6>[ 0.000000] Memory: 28876k/32768k available (2334k kernel code, 3892k reserved, 399k data, 208k init, 0k highmem) <6>[ 0.000000] NR_IRQS:83 <0>[ 0.000000] irq init done <4>[ 0.000000] plat_time_init: plat time init done <6>[ 0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) <6>[ 0.080000] pid_max: default: 32768 minimum: 301 <6>[ 0.080000] Mount-cache hash table entries: 512 <6>[ 0.090000] NET: Registered protocol family 16 <6>[ 0.120000] bio: create slab at 0 <5>[ 0.120000] SCSI subsystem initialized <6>[ 0.130000] usbcore: registered new interface driver usbfs <6>[ 0.130000] usbcore: registered new interface driver hub <6>[ 0.140000] usbcore: registered new device driver usb <6>[ 0.140000] Switching to clocksource MIPS <6>[ 0.150000] NET: Registered protocol family 2 <6>[ 0.150000] TCP established hash table entries: 512 (order: 0, 4096 bytes) <6>[ 0.160000] TCP bind hash table entries: 512 (order: -1, 2048 bytes) <6>[ 0.170000] TCP: Hash tables configured (established 512 bind 512) <6>[ 0.170000] TCP: reno registered <6>[ 0.180000] UDP hash table entries: 256 (order: 0, 4096 bytes) <6>[ 0.180000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) <6>[ 0.190000] NET: Registered protocol family 1 <5>[ 0.190000] gpio_proc: module loaded and /proc/gpio/ created <6>[ 0.200000] Register LED Device <5>[ 0.200000] wl0gpio_proc: module loaded and /proc/wl0gpio/ created <4>[ 0.210000] AR7100 GPIOC major 0 <6>[ 0.220000] squashfs: version 3.0 (2006/03/15) Phillip Lougher <6>[ 0.220000] msgmni has been set to 56 <6>[ 0.230000] io scheduler noop registered <6>[ 0.230000] io scheduler deadline registered (default) <6>[ 0.230000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled <6>[ 0.260000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 19) is a 16550A <6>[ 0.270000] console [ttyS0] enabled, bootconsole disabled <0>[ 0.280000] guessed flashsize = 8M <0>[ 0.290000] scanning for root partition <0>[ 0.290000] WRT160NL/E2100L uboot detected <0>[ 0.290000] bootloader size = 40000 <0>[ 0.300000] <0>[ 0.300000] found squashfs at 193000 <5>[ 0.310000] Creating 8 MTD partitions on "ar7100-nor0": <5>[ 0.310000] 0x000000000000-0x000000040000 : "RedBoot" <5>[ 0.320000] 0x000000040000-0x0000007e0000 : "linux" <5>[ 0.330000] 0x000000193000-0x0000007a0000 : "rootfs" <4>[ 0.330000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only <5>[ 0.350000] mtd: partition "rootfs" set to be root filesystem <5>[ 0.350000] 0x0000007a0000-0x0000007e0000 : "ddwrt" <5>[ 0.360000] 0x0000007e0000-0x0000007f0000 : "nvram" <5>[ 0.360000] 0x0000007f0000-0x000000800000 : "FIS directory" <5>[ 0.370000] 0x0000007f0000-0x000000800000 : "board_config" <5>[ 0.380000] 0x000000000000-0x000000800000 : "fullflash" <4>[ 0.390000] ->Oops: flash id 0xc22017 . <6>[ 0.390000] tun: Universal TUN/TAP device driver, 1.6 <6>[ 0.400000] tun: (C) 1999-2004 Max Krasnyansky <6>[ 0.800000] PPP generic driver version 2.4.2 <6>[ 0.810000] PPP BSD Compression module registered <6>[ 0.810000] PPP Deflate Compression module registered <6>[ 0.820000] PPP MPPE Compression module registered <6>[ 0.820000] NET: Registered protocol family 24 <6>[ 0.830000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 0.860000] ar71xx-ehci ar71xx-ehci.0: Atheros AR91xx built-in EHCI controller <6>[ 0.870000] ar71xx-ehci ar71xx-ehci.0: new USB bus registered, assigned bus number 1 <6>[ 0.910000] ar71xx-ehci ar71xx-ehci.0: irq 3, io mem 0x1b000000 <6>[ 0.930000] ar71xx-ehci ar71xx-ehci.0: USB 2.0 started, EHCI 1.00 <6>[ 0.930000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 <6>[ 0.940000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 0.950000] usb usb1: Product: Atheros AR91xx built-in EHCI controller <6>[ 0.950000] usb usb1: Manufacturer: Linux 3.10.87 ehci_hcd <6>[ 0.960000] usb usb1: SerialNumber: platform <6>[ 0.960000] hub 1-0:1.0: USB hub found <6>[ 0.970000] hub 1-0:1.0: 1 port detected <6>[ 0.980000] u32 classifier <6>[ 0.980000] Performance counters on <6>[ 0.990000] input device check on <6>[ 0.990000] Actions configured <6>[ 0.990000] Netfilter messages via NETLINK v0.30. <6>[ 1.000000] nf_conntrack version 0.5.0 (451 buckets, 1804 max) <4>[ 1.010000] nf_conntrack_rtsp v0.6.21 loading <4>[ 1.010000] nf_nat_rtsp v0.6.21 loading <6>[ 1.020000] ip_tables: (C) 2000-2006 Netfilter Core Team <6>[ 1.020000] TCP: westwood registered <6>[ 1.020000] TCP: hybla registered <6>[ 1.030000] TCP: vegas registered <6>[ 1.030000] NET: Registered protocol family 17 <5>[ 1.040000] Bridge firewalling registered <6>[ 1.040000] 8021q: 802.1Q VLAN Support v1.8 <6>[ 1.050000] searching for nvram <6>[ 1.050000] nvram size = 0 <6>[ 1.080000] Atheros AR71xx hardware watchdog driver version 0.1.0 <6>[ 1.090000] ar71xx-wdt: timeout=15 secs (max=21) ref freq=200000000 <6>[ 1.100000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. <6>[ 1.110000] Freeing unused kernel memory: 208K (8030c000 - 80340000) <7>[ 3.670000] ar71xx-wdt: enabling watchdog timer <6>[ 3.770000] libphy: ag71xx_mdio: probed <6>[ 4.110000] Registering RTL8306SD switch with Chip ID: 0x5988, version: 0x0000 <6>[ 4.110000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=00008306, driver=Realtek RTL8306S] <6>[ 4.120000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RMII <6>[ 4.450000] ag71xx ag71xx.1: connected to PHY at ag71xx-mdio.0:04 [uid=00008306, driver=Realtek RTL8306S] <6>[ 4.460000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:RMII <6>[ 4.660000] Loading modules backported from Linux version master-2015-07-21-0-g47cd203 <6>[ 4.670000] Backport generated by backports.git backports-20150626-0-gc1a4168 <6>[ 4.830000] cfg80211: World regulatory domain updated: <6>[ 4.830000] cfg80211: DFS Master region: unset <6>[ 4.840000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) <6>[ 4.850000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 4.850000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 4.860000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 4.870000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 4.880000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 4.890000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) <7>[ 5.500000] ath: EEPROM regdomain: 0x0 <7>[ 5.500000] ath: EEPROM indicates default country code should be used <7>[ 5.500000] ath: doing EEPROM country->regdmn map search <7>[ 5.500000] ath: country maps to regdmn code: 0x3a <7>[ 5.500000] ath: Country alpha2 being used: US <7>[ 5.500000] ath: Regpair used: 0x3a <7>[ 5.540000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' <6>[ 5.540000] ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2122 RF Rev:a2 mem=0xb80c0000, irq=2 <6>[ 5.640000] cfg80211: Regulatory domain changed to country: US <6>[ 5.640000] cfg80211: DFS Master region: FCC <6>[ 5.650000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) <6>[ 5.660000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A) <6>[ 5.660000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A) <6>[ 5.670000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (N/A) <6>[ 5.680000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) <6>[ 5.690000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) <7>[ 6.130000] ar71xx: pll_reg 0xb8050014: 0x13000a44 <6>[ 6.130000] eth0: link up (100Mbps/Full duplex) <6>[ 8.250000] device br0 entered promiscuous mode <6>[ 8.280000] eth0: link down <6>[ 8.360000] device eth0 entered promiscuous mode <6>[ 8.410000] device eth1 entered promiscuous mode <6>[ 8.420000] br0: port 1(eth0) entered forwarding state <6>[ 8.430000] br0: port 1(eth0) entered forwarding state <6>[ 8.430000] device br0 left promiscuous mode <6>[ 8.440000] device br0 entered promiscuous mode <3>[ 8.490000] cfg80211: Invalid regulatory domain detected: <6>[ 8.490000] cfg80211: Regulatory domain: 00 <6>[ 8.500000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) <6>[ 8.510000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 8.520000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 8.520000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 8.530000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 8.540000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 8.550000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) <6>[ 8.610000] cfg80211: World regulatory domain updated: <6>[ 8.620000] cfg80211: DFS Master region: unset <6>[ 8.620000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) <6>[ 8.630000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 8.640000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 8.650000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 8.660000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 8.670000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 8.670000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) <6>[ 8.680000] cfg80211: Regulatory domain changed to country: US <6>[ 8.690000] cfg80211: DFS Master region: FCC <6>[ 8.700000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) <6>[ 8.700000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A) <6>[ 8.710000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A) <6>[ 8.720000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (N/A) <6>[ 8.730000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) <6>[ 8.740000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) <7>[ 9.140000] ar71xx: pll_reg 0xb8050014: 0x13000a44 <6>[ 9.140000] eth0: link up (100Mbps/Full duplex) <6>[ 9.300000] device ath0 entered promiscuous mode <6>[ 9.310000] br0: port 3(ath0) entered forwarding state <6>[ 9.310000] br0: port 3(ath0) entered forwarding state <6>[ 10.260000] br0: port 3(ath0) entered disabled state <6>[ 10.430000] br0: port 1(eth0) entered forwarding state <6>[ 11.190000] br0: port 3(ath0) entered forwarding state <6>[ 11.190000] br0: port 3(ath0) entered forwarding state <6>[ 11.370000] device ath0.wds0 entered promiscuous mode <6>[ 11.400000] device br0 left promiscuous mode <6>[ 13.190000] br0: port 3(ath0) entered forwarding state <6>[ 17.260000] device ath0.sta1 entered promiscuous mode <6>[ 17.260000] br0: port 5(ath0.sta1) entered forwarding state <6>[ 17.270000] br0: port 5(ath0.sta1) entered forwarding state <6>[ 19.270000] br0: port 5(ath0.sta1) entered forwarding state <6>[ 39.060000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead. <6>[ 304.610000] device ath0.sta1 left promiscuous mode <6>[ 304.620000] br0: port 5(ath0.sta1) entered disabled state <6>[ 337.900000] device ath0.sta1 entered promiscuous mode <6>[ 337.920000] br0: port 5(ath0.sta1) entered forwarding state <6>[ 337.920000] br0: port 5(ath0.sta1) entered forwarding state <6>[ 339.920000] br0: port 5(ath0.sta1) entered forwarding state root@160NL-WDS-South:~# exit Connection closed by foreign host. BusyBox v1.23.2 (2015-09-07 03:51:18 CEST) built-in shell (ash) root@160NL-WDS-North:~# dmesg <5>[ 0.000000] Linux version 3.10.87 (root@dd-wrt) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 r46799) ) #8599 Mon Sep 7 03:51:03 CEST 2015 <4>[ 0.000000] flash_size passed from bootloader = 8 <6>[ 0.000000] bootconsole [early0] enabled <6>[ 0.000000] CPU revision is: 00019374 (MIPS 24Kc) <6>[ 0.000000] booting platform Atheros AR9130 rev 2 (0xb8) <6>[ 0.000000] Determined physical RAM map: <6>[ 0.000000] memory: 02000000 @ 00000000 (usable) <4>[ 0.000000] Zone ranges: <4>[ 0.000000] Normal [mem 0x00000000-0x01ffffff] <4>[ 0.000000] Movable zone start for each node <4>[ 0.000000] Early memory node ranges <4>[ 0.000000] node 0: [mem 0x00000000-0x01ffffff] <7>[ 0.000000] On node 0 totalpages: 8192 <7>[ 0.000000] free_area_init_node: node 0, pgdat 802f6fa0, node_mem_map 81000000 <7>[ 0.000000] Normal zone: 64 pages used for memmap <7>[ 0.000000] Normal zone: 0 pages reserved <7>[ 0.000000] Normal zone: 8192 pages, LIFO batch:0 <4>[ 0.000000] Primary instruction cache 64kB, 4-way, VIPT, I-cache aliases, linesize 32 bytes. <4>[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes <7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 <7>[ 0.000000] pcpu-alloc: [0] 0 <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 <5>[ 0.000000] Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd init=/sbin/init <6>[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) <6>[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) <6>[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) <6>[ 0.000000] Writing ErrCtl register=00000000 <6>[ 0.000000] Readback ErrCtl register=00000000 <6>[ 0.000000] Memory: 28876k/32768k available (2334k kernel code, 3892k reserved, 399k data, 208k init, 0k highmem) <6>[ 0.000000] NR_IRQS:83 <0>[ 0.000000] irq init done <4>[ 0.000000] plat_time_init: plat time init done <6>[ 0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) <6>[ 0.080000] pid_max: default: 32768 minimum: 301 <6>[ 0.080000] Mount-cache hash table entries: 512 <6>[ 0.090000] NET: Registered protocol family 16 <6>[ 0.120000] bio: create slab at 0 <5>[ 0.120000] SCSI subsystem initialized <6>[ 0.130000] usbcore: registered new interface driver usbfs <6>[ 0.130000] usbcore: registered new interface driver hub <6>[ 0.140000] usbcore: registered new device driver usb <6>[ 0.140000] Switching to clocksource MIPS <6>[ 0.150000] NET: Registered protocol family 2 <6>[ 0.150000] TCP established hash table entries: 512 (order: 0, 4096 bytes) <6>[ 0.160000] TCP bind hash table entries: 512 (order: -1, 2048 bytes) <6>[ 0.170000] TCP: Hash tables configured (established 512 bind 512) <6>[ 0.170000] TCP: reno registered <6>[ 0.180000] UDP hash table entries: 256 (order: 0, 4096 bytes) <6>[ 0.180000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) <6>[ 0.190000] NET: Registered protocol family 1 <5>[ 0.190000] gpio_proc: module loaded and /proc/gpio/ created <6>[ 0.200000] Register LED Device <5>[ 0.200000] wl0gpio_proc: module loaded and /proc/wl0gpio/ created <4>[ 0.210000] AR7100 GPIOC major 0 <6>[ 0.220000] squashfs: version 3.0 (2006/03/15) Phillip Lougher <6>[ 0.220000] msgmni has been set to 56 <6>[ 0.230000] io scheduler noop registered <6>[ 0.230000] io scheduler deadline registered (default) <6>[ 0.230000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled <6>[ 0.260000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 19) is a 16550A <6>[ 0.270000] console [ttyS0] enabled, bootconsole disabled <0>[ 0.280000] guessed flashsize = 8M <0>[ 0.290000] scanning for root partition <0>[ 0.290000] WRT160NL/E2100L uboot detected <0>[ 0.290000] bootloader size = 40000 <0>[ 0.300000] <0>[ 0.300000] found squashfs at 193000 <5>[ 0.310000] Creating 8 MTD partitions on "ar7100-nor0": <5>[ 0.310000] 0x000000000000-0x000000040000 : "RedBoot" <5>[ 0.320000] 0x000000040000-0x0000007e0000 : "linux" <5>[ 0.330000] 0x000000193000-0x0000007a0000 : "rootfs" <4>[ 0.330000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only <5>[ 0.350000] mtd: partition "rootfs" set to be root filesystem <5>[ 0.350000] 0x0000007a0000-0x0000007e0000 : "ddwrt" <5>[ 0.360000] 0x0000007e0000-0x0000007f0000 : "nvram" <5>[ 0.360000] 0x0000007f0000-0x000000800000 : "FIS directory" <5>[ 0.370000] 0x0000007f0000-0x000000800000 : "board_config" <5>[ 0.380000] 0x000000000000-0x000000800000 : "fullflash" <4>[ 0.390000] ->Oops: flash id 0xc22017 . <6>[ 0.390000] tun: Universal TUN/TAP device driver, 1.6 <6>[ 0.400000] tun: (C) 1999-2004 Max Krasnyansky <6>[ 0.800000] PPP generic driver version 2.4.2 <6>[ 0.810000] PPP BSD Compression module registered <6>[ 0.810000] PPP Deflate Compression module registered <6>[ 0.820000] PPP MPPE Compression module registered <6>[ 0.820000] NET: Registered protocol family 24 <6>[ 0.830000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 0.860000] ar71xx-ehci ar71xx-ehci.0: Atheros AR91xx built-in EHCI controller <6>[ 0.870000] ar71xx-ehci ar71xx-ehci.0: new USB bus registered, assigned bus number 1 <6>[ 0.910000] ar71xx-ehci ar71xx-ehci.0: irq 3, io mem 0x1b000000 <6>[ 0.930000] ar71xx-ehci ar71xx-ehci.0: USB 2.0 started, EHCI 1.00 <6>[ 0.930000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 <6>[ 0.940000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 0.950000] usb usb1: Product: Atheros AR91xx built-in EHCI controller <6>[ 0.950000] usb usb1: Manufacturer: Linux 3.10.87 ehci_hcd <6>[ 0.960000] usb usb1: SerialNumber: platform <6>[ 0.960000] hub 1-0:1.0: USB hub found <6>[ 0.970000] hub 1-0:1.0: 1 port detected <6>[ 0.980000] u32 classifier <6>[ 0.980000] Performance counters on <6>[ 0.990000] input device check on <6>[ 0.990000] Actions configured <6>[ 0.990000] Netfilter messages via NETLINK v0.30. <6>[ 1.000000] nf_conntrack version 0.5.0 (451 buckets, 1804 max) <4>[ 1.010000] nf_conntrack_rtsp v0.6.21 loading <4>[ 1.010000] nf_nat_rtsp v0.6.21 loading <6>[ 1.020000] ip_tables: (C) 2000-2006 Netfilter Core Team <6>[ 1.020000] TCP: westwood registered <6>[ 1.020000] TCP: hybla registered <6>[ 1.030000] TCP: vegas registered <6>[ 1.030000] NET: Registered protocol family 17 <5>[ 1.040000] Bridge firewalling registered <6>[ 1.040000] 8021q: 802.1Q VLAN Support v1.8 <6>[ 1.050000] searching for nvram <6>[ 1.050000] nvram size = 0 <6>[ 1.080000] Atheros AR71xx hardware watchdog driver version 0.1.0 <6>[ 1.090000] ar71xx-wdt: timeout=15 secs (max=21) ref freq=200000000 <6>[ 1.100000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. <6>[ 1.110000] Freeing unused kernel memory: 208K (8030c000 - 80340000) <7>[ 3.820000] ar71xx-wdt: enabling watchdog timer <6>[ 3.900000] libphy: ag71xx_mdio: probed <6>[ 4.230000] Registering RTL8306SD switch with Chip ID: 0x5988, version: 0x0000 <6>[ 4.230000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=00008306, driver=Realtek RTL8306S] <6>[ 4.240000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RMII <6>[ 4.570000] ag71xx ag71xx.1: connected to PHY at ag71xx-mdio.0:04 [uid=00008306, driver=Realtek RTL8306S] <6>[ 4.580000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:RMII <6>[ 4.780000] Loading modules backported from Linux version master-2015-07-21-0-g47cd203 <6>[ 4.790000] Backport generated by backports.git backports-20150626-0-gc1a4168 <6>[ 4.950000] cfg80211: World regulatory domain updated: <6>[ 4.950000] cfg80211: DFS Master region: unset <6>[ 4.950000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) <6>[ 4.960000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 4.970000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 4.980000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 4.990000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 5.000000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 5.000000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) <7>[ 5.620000] ath: EEPROM regdomain: 0x0 <7>[ 5.620000] ath: EEPROM indicates default country code should be used <7>[ 5.620000] ath: doing EEPROM country->regdmn map search <7>[ 5.620000] ath: country maps to regdmn code: 0x3a <7>[ 5.620000] ath: Country alpha2 being used: US <7>[ 5.620000] ath: Regpair used: 0x3a <7>[ 5.660000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' <6>[ 5.660000] ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2122 RF Rev:a2 mem=0xb80c0000, irq=2 <6>[ 5.670000] cfg80211: Regulatory domain changed to country: US <6>[ 5.680000] cfg80211: DFS Master region: FCC <6>[ 5.680000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) <6>[ 5.690000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A) <6>[ 5.700000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A) <6>[ 5.710000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (N/A) <6>[ 5.720000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) <6>[ 5.730000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) <7>[ 6.230000] ar71xx: pll_reg 0xb8050014: 0x13000a44 <6>[ 6.230000] eth0: link up (100Mbps/Full duplex) <6>[ 8.400000] device br0 entered promiscuous mode <6>[ 8.430000] eth0: link down <6>[ 8.480000] device eth0 entered promiscuous mode <6>[ 8.540000] device eth1 entered promiscuous mode <6>[ 8.540000] br0: port 1(eth0) entered forwarding state <6>[ 8.550000] br0: port 1(eth0) entered forwarding state <6>[ 8.550000] device br0 left promiscuous mode <6>[ 8.560000] device br0 entered promiscuous mode <7>[ 8.590000] ar71xx: pll_reg 0xb8050018: 0x13000a44 <6>[ 8.590000] eth1: link up (100Mbps/Full duplex) <6>[ 8.590000] br0: port 2(eth1) entered forwarding state <6>[ 8.600000] br0: port 2(eth1) entered forwarding state <3>[ 8.630000] cfg80211: Invalid regulatory domain detected: <6>[ 8.630000] cfg80211: Regulatory domain: 00 <6>[ 8.640000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) <6>[ 8.650000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 8.660000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 8.660000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 8.670000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 8.680000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 8.690000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) <6>[ 8.750000] cfg80211: World regulatory domain updated: <6>[ 8.760000] cfg80211: DFS Master region: unset <6>[ 8.760000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) <6>[ 8.770000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 8.780000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 8.790000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 8.800000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 8.800000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) <6>[ 8.810000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) <6>[ 8.840000] cfg80211: Regulatory domain changed to country: US <6>[ 8.840000] cfg80211: DFS Master region: FCC <6>[ 8.850000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) <6>[ 8.860000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A) <6>[ 8.860000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A) <6>[ 8.870000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (N/A) <6>[ 8.880000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) <6>[ 8.890000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) <7>[ 9.230000] ar71xx: pll_reg 0xb8050014: 0x13000a44 <6>[ 9.230000] eth0: link up (100Mbps/Full duplex) <6>[ 9.990000] device ath0 entered promiscuous mode <6>[ 10.050000] device br0 left promiscuous mode <6>[ 10.550000] br0: port 1(eth0) entered forwarding state <6>[ 10.600000] br0: port 2(eth1) entered forwarding state <6>[ 10.930000] ath0: authenticate with 00:25:9c:c0:6a:cd <6>[ 10.960000] ath0: send auth to 00:25:9c:c0:6a:cd (try 1/3) <6>[ 10.980000] ath0: authenticated <6>[ 10.990000] ath0: associate with 00:25:9c:c0:6a:cd (try 1/3) <6>[ 10.990000] ath0: RX AssocResp from 00:25:9c:c0:6a:cd (capab=0x411 status=0 aid=1) <6>[ 11.000000] ath0: associated <6>[ 12.020000] br0: port 3(ath0) entered forwarding state <6>[ 12.020000] br0: port 3(ath0) entered forwarding state <6>[ 14.020000] br0: port 3(ath0) entered forwarding state <6>[ 22.060000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead. root@160NL-WDS-North:~# exit Connection closed by foreign host.