sha256 
cf6cf73f7530fae0a64bdfbe3f94e5f2388cd033174d4c3fb2889d6741443987  *dd-wrt-webupgrade.bin
471c628df65ee703a0771930f7d81b9062ee1fdc6d8919457f1a9fd0c91e561e  *wndr3700v4-webflash.bin
f4c0fad0a6d4b0f312aec1bd15ea9ee69b824b1ae4503d08f94ce914b45537c7  *wrt160nl-firmware.bin

#
 EA8500 main router has uptime  6 days, 4:48  with r41813 and NO problems at all.
  I like it bunches so not gonna mess with it   :-)
#

Linksys EA8500
DD-WRT v3.0-r41892 std (01/05/20)
Linux 4.9.208-rc1 #504 SMP Sat Jan 4 05:01:21 +03 2020 armv7l
No reset -- GUI install over r41874 
 switch / ovpn server / VLAN / samba share ext4 / I turned on both its radios and they work ok also
 working just fine for me 

#

Netgear WNDR3700 V4
DD-WRT v3.0-r41892 std (01/05/20)
Linux 3.18.140-d2 #64617 Sun Jan 5 05:08:33 +04 2020 mips
No reset -- GUI install over r41874
 switch / ovpn server / samba share ext4 
 all good

#

Linksys WRT160NL
DD-WRT v3.0-r41892 std (01/05/20)
Linux 3.10.108-d8 #33029 Sun Jan 5 02:59:14 +04 2020 mips
No reset -- GUI install over r41874
 switch  /  samba share FAT32 
 working just fine

#
 ifconfig & dmesg of all three units below  :')
#

mrjcd@Deb:~$ ssh root@ea8500.mrjcd.com
DD-WRT v3.0-r41892 std (c) 2020 NewMedia-NET GmbH
Release: 01/05/20
Board: Linksys EA8500
==========================================================
 
     ___  ___     _      _____  ______       ____  ___ 
    / _ \/ _ \___| | /| / / _ \/_  __/ _  __|_  / / _ \
   / // / // /___/ |/ |/ / , _/ / /   | |/ //_ <_/ // /
  /____/____/    |__/|__/_/|_| /_/    |___/____(_)___/ 
                                                     
                       DD-WRT v3.0
                   http://www.dd-wrt.com
 
==========================================================


BusyBox v1.31.1 (2020-01-05 00:57:52 +03) built-in shell (ash)

root@EA8500:~# ifconfig
ath0      Link encap:Ethernet  HWaddr C0:56:27:08:B2:94  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:89621 errors:0 dropped:0 overruns:0 frame:0
          TX packets:82837 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:94963951 (90.5 MiB)  TX bytes:77277797 (73.6 MiB)

ath1      Link encap:Ethernet  HWaddr C0:56:27:08:B2:95  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:87733 errors:0 dropped:0 overruns:0 frame:0
          TX packets:87826 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:95125337 (90.7 MiB)  TX bytes:84440260 (80.5 MiB)

br0       Link encap:Ethernet  HWaddr C0:56:27:08:B2:92  
          inet addr:10.72.28.52  Bcast:10.72.28.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:36428 errors:0 dropped:209 overruns:0 frame:0
          TX packets:38942 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:32142754 (30.6 MiB)  TX bytes:33162412 (31.6 MiB)

eth0      Link encap:Ethernet  HWaddr C0:56:27:08:B2:92  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:233887 errors:0 dropped:0 overruns:0 frame:0
          TX packets:243935 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:219927730 (209.7 MiB)  TX bytes:253936649 (242.1 MiB)
          Interrupt:100 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING MULTICAST  MTU:65536  Metric:1
          RX packets:169 errors:0 dropped:0 overruns:0 frame:0
          TX packets:169 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1 
          RX bytes:20681 (20.1 KiB)  TX bytes:20681 (20.1 KiB)

tun2      Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
          inet addr:10.19.92.225  P-t-P:10.19.92.225  Mask:255.255.255.224
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:16161 errors:0 dropped:0 overruns:0 frame:0
          TX packets:21704 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:7751630 (7.3 MiB)  TX bytes:23315185 (22.2 MiB)

vlan1     Link encap:Ethernet  HWaddr C0:56:27:08:B2:92  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:22424 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8253 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:26664914 (25.4 MiB)  TX bytes:3412065 (3.2 MiB)

vlan15    Link encap:Ethernet  HWaddr C0:56:27:08:B2:92  
          inet addr:192.168.1.5  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:49 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:8141 (7.9 KiB)

vlan2     Link encap:Ethernet  HWaddr C0:56:27:08:B2:92  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:207473 errors:0 dropped:0 overruns:0 frame:0
          TX packets:235633 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:188845406 (180.0 MiB)  TX bytes:249540703 (237.9 MiB)

root@EA8500:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.9.208-rc1 (root@server2) (gcc version 9.2.0 (OpenWrt GCC 9.2.0 r10880-cb3c4c713d) ) #504 SMP Sat Jan 4 05:01:21 +03 2020
[    0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] OF: fdt:Machine model: Linksys EA8500 WiFi Router
[    0.000000] OF: fdt:Ignoring memory range 0x41500000 - 0x42000000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 122880
[    0.000000] free_area_init_node: node 0, pgdat c0b2d1c0, node_mem_map ddc39000
[    0.000000]   Normal zone: 960 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 122880 pages, LIFO batch:31
[    0.000000] percpu: Embedded 12 pages/cpu s18892 r8192 d22068 u49152
[    0.000000] pcpu-alloc: s18892 r8192 d22068 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 121920
[    0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:14
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 478240K/491520K available (5120K kernel code, 183K rwdata, 1028K rodata, 1024K init, 407K bss, 13280K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xde800000 - 0xff800000   ( 528 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xde000000   ( 480 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0208000 - 0xc0800000   (6112 kB)
[    0.000000]       .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
[    0.000000]       .data : 0xc0b00000 - 0xc0b2dea8   ( 184 kB)
[    0.000000]        .bss : 0xc0b2f000 - 0xc0b94ebc   ( 408 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[    0.000008] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[    0.000021] Switching to timer-based delay loop, resolution 160ns
[    0.000193] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[    0.000215] pid_max: default: 32768 minimum: 301
[    0.000326] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000341] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000926] CPU: Testing write buffer coherency: ok
[    0.001212] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001261] Setting up static identity map for 0x42300000 - 0x4230003c
[    0.004344] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.004536] Brought up 2 CPUs
[    0.004556] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[    0.004567] CPU: All CPU(s) started in SVC mode.
[    0.017875] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[    0.018075] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.018101] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.018188] pinctrl core: initialized pinctrl subsystem
[    0.019338] NET: Registered protocol family 16
[    0.019699] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.051803] cpuidle: using governor ladder
[    0.104743] msm_bus_fabric_init_driver
[    0.105818] pps_core: LinuxPPS API ver. 1 registered
[    0.105832] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.105866] PTP clock support registered
[    0.107466] clocksource: Switched to clocksource dg_timer
[    0.111764] NET: Registered protocol family 2
[    0.112398] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.112437] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.112492] TCP: Hash tables configured (established 4096 bind 4096)
[    0.112547] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.112569] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.112742] NET: Registered protocol family 1
[    0.112789] PCI: CLS 0 bytes, default 64
[    0.116881] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[    0.126846] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.132494] cryptodev: driver 1.9 loaded.
[    0.132529] io scheduler noop registered
[    0.132542] io scheduler deadline registered (default)
[    0.134277] 1b500000.pci supply vdda not found, using dummy regulator
[    0.134376] 1b500000.pci supply vdda_phy not found, using dummy regulator
[    0.134474] 1b500000.pci supply vdda_refclk not found, using dummy regulator
[    0.135281] OF: PCI: host bridge /soc/pci@1b500000 ranges:
[    0.135321] OF: PCI:    IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[    0.135347] OF: PCI:   MEM 0x08000000..0x0fdfffff -> 0x08000000
[    0.237828] qcom-pcie 1b500000.pci: link up
[    0.238030] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[    0.238053] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.238072] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
[    0.238086] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[    0.238139] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
[    0.238293] pci 0000:00:00.0: supports D1
[    0.238304] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.238607] PCI: bus0: Fast back to back transfers disabled
[    0.238935] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
[    0.239182] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    0.240337] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.241001] PCI: bus1: Fast back to back transfers disabled
[    0.241290] pci 0000:00:00.0: BAR 14: assigned [mem 0x08000000-0x081fffff]
[    0.241315] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[    0.241450] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    0.241473] pci 0000:00:00.0:   bridge window [mem 0x08000000-0x081fffff]
[    0.241883] aer 0000:00:00.0:pcie002: service driver aer loaded
[    0.242358] 1b700000.pci supply vdda not found, using dummy regulator
[    0.242454] 1b700000.pci supply vdda_phy not found, using dummy regulator
[    0.242553] 1b700000.pci supply vdda_refclk not found, using dummy regulator
[    0.243327] OF: PCI: host bridge /soc/pci@1b700000 ranges:
[    0.243363] OF: PCI:    IO 0x31e00000..0x31efffff -> 0x31e00000
[    0.243386] OF: PCI:   MEM 0x2e000000..0x31dfffff -> 0x2e000000
[    0.347853] qcom-pcie 1b700000.pci: link up
[    0.348035] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[    0.348053] pci_bus 0001:00: root bus resource [bus 00-ff]
[    0.348076] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[    0.348120] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
[    0.348249] pci 0001:00:00.0: supports D1
[    0.348259] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[    0.348539] PCI: bus0: Fast back to back transfers disabled
[    0.348846] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
[    0.349071] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    0.350140] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[    0.350771] PCI: bus1: Fast back to back transfers disabled
[    0.351156] pci 0001:00:00.0: BAR 14: assigned [mem 0x2e000000-0x2e1fffff]
[    0.351180] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[    0.351302] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    0.351321] pci 0001:00:00.0:   bridge window [mem 0x2e000000-0x2e1fffff]
[    0.351692] aer 0001:00:00.0:pcie002: service driver aer loaded
[    0.352506] deviceless supply s1b not found, using dummy regulator
[    0.354104] L2 @ QSB rate. Forcing new rate.
[    0.354269] L2 @ 800000 KHz
[    0.354377] CPU0 @ 800000 KHz
[    0.354387] CPU1 @ QSB rate. Forcing new rate.
[    0.354508] CPU1 @ 800000 KHz
[    0.356656] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[    0.358395] serial8250_init
[    0.358410] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.359397] msm_serial 16340000.serial: msm_serial: detected port #0
[    0.359473] msm_serial 16340000.serial: uartclk = 7372800
[    0.359530] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 168, base_baud = 460800) is a MSM
[    0.359561] msm_serial: console setup on port #0
[    1.052188] console [ttyMSM0] enabled
[    1.056883] msm_serial: driver initialized
[    1.062124] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
[    1.064255] nand: AMD/Spansion S34MS01G2
[    1.070854] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.075141] 19 ofpart partitions found on MTD device qcom_nand.0
[    1.082135] Creating 19 MTD partitions on "qcom_nand.0":
[    1.088288] 0x000000000000-0x000000040000 : "SBL1"
[    1.094816] 0x000000040000-0x000000180000 : "MIBIB"
[    1.100654] 0x000000180000-0x0000002c0000 : "SBL2"
[    1.105331] 0x0000002c0000-0x000000540000 : "SBL3"
[    1.108386] random: fast init done
[    1.115958] 0x000000540000-0x000000660000 : "DDRCONFIG"
[    1.118450] 0x000000660000-0x000000780000 : "SSD"
[    1.123367] 0x000000780000-0x000000a00000 : "TZ"
[    1.130015] 0x000000a00000-0x000000c80000 : "RPM"
[    1.134739] 0x000000c80000-0x000000dc0000 : "art"
[    1.137747] 0x000000dc0000-0x000000ec0000 : "APPSBL"
[    1.142103] 0x000000ec0000-0x000000f00000 : "u_env"
[    1.146116] 0x000000f00000-0x000000f40000 : "s_env"
[    1.150772] 0x000000f40000-0x000000f80000 : "devinfo"
[    1.155532] 0x000000f80000-0x000003780000 : "linux"
[    1.214028] 0x000001280000-0x000003780000 : "rootfs"
[    1.265092] mtd: partition "rootfs" set to be root filesystem
[    1.265123] 0x000003780000-0x000005f40000 : "linux2"
[    1.324584] 0x000003a80000-0x000005f40000 : "rootfs2"
[    1.373767] 0x000005f40000-0x000005f80000 : "nvram"
[    1.374986] 0x000005f80000-0x000008000000 : "ddwrt"
[    1.399261] random: crng init done
[    1.423148] libphy: GPIO Bitbanged MDIO: probed
[    1.426361] libphy: Fixed MDIO Bus: probed
[    1.447313] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
[    2.225311] stmmac - user ID: 0x10, Synopsys ID: 0x37
[    2.225337]  Ring mode enabled
[    2.229422]  DMA HW capability register supported
[    2.232288]  Enhanced/Alternate descriptors
[    2.238008] 	Enabled extended descriptors
[    2.240888]  RX Checksum Offload Engine supported
[    2.245056] 	COE Type 2
[    2.249819]  TX Checksum insertion supported
[    2.251998]  Wake-Up On Lan supported
[    2.256516] eth%d: device MAC address 00:06:3b:01:41:00
[    2.260125]  Enable RX Mitigation via HW Watchdog Timer
[    2.266432] stmmac - user ID: 0x10, Synopsys ID: 0x37
[    2.270419]  Ring mode enabled
[    2.275521]  DMA HW capability register supported
[    2.278555]  Enhanced/Alternate descriptors
[    2.284116] 	Enabled extended descriptors
[    2.287076]  RX Checksum Offload Engine supported
[    2.291301] 	COE Type 2
[    2.295926]  TX Checksum insertion supported
[    2.298267]  Wake-Up On Lan supported
[    2.302702] eth%d: device MAC address 00:03:7f:ba:db:02
[    2.306260]  Enable RX Mitigation via HW Watchdog Timer
[    2.312162] i2c /dev entries driver
[    2.317094] Calibration not found.
[    2.321124] CPUidle arm: CPU 0 failed to init idle CPU ops
[    2.323897] GACT probability NOT on
[    2.328997] Mirror/redirect action on
[    2.332323] Simple TC action Loaded
[    2.336700] netem: version 1.3
[    2.339500] u32 classifier
[    2.342541]     Performance counters on
[    2.345233]     input device check on
[    2.349033]     Actions configured
[    2.352793] Netfilter messages via NETLINK v0.30.
[    2.356355] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[    2.361545] nf_conntrack_rtsp v0.7 loading
[    2.367131] xt_time: kernel timezone is -0000
[    2.370935] ip_set: protocol 6
[    2.375461] gre: GRE over IPv4 demultiplexor driver
[    2.378656] nf_nat_rtsp v0.7 loading
[    2.383023] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.387001] NET: Registered protocol family 17
[    2.392260] Bridge firewalling registered
[    2.396367] 8021q: 802.1Q VLAN Support v1.8
[    2.400661] Registering SWP/SWPB emulation handler
[    2.414048] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
[    2.432647] s1a: Bringing 0uV into 1050000-1050000uV
[    2.432911] s1b: Bringing 0uV into 1050000-1050000uV
[    2.436885] s2a: Bringing 0uV into 800000-800000uV
[    2.441949] s2b: Bringing 0uV into 800000-800000uV
[    2.450106] trying to register driver cpufreq-dt
[    2.452545] searching for nvram
[    2.455792] nvram size = 262144
[    2.499032] no valid UBI magic found inside mtd13
[    2.499065] hctosys: unable to open rtc device (rtc0)
[    2.508192] VFS: Mounted root (squashfs filesystem) readonly on device 31:14.
[    2.509741] Freeing unused kernel memory: 1024K
[    5.422471] Loading modules backported from Linux version wireless-drivers-next-for-davem-2017-09-01-0-geb464d4a8d09
[    5.422501] Backport generated by backports.git backports-20160324-111-g97b8d7c4
[    5.936152] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[    5.936799] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[    6.099360] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[    6.099400] ath10k_pci 0000:01:00.0: Falling back to user helper
[    6.458444] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
[    6.458481] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[    6.469532] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.5.3-00050 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 5ae23169
[    6.538209] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:2 crc32 792a3d38
[    7.763605] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16  peers: 528  tid: 102
[    7.837348] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[    7.919852] ath: EEPROM regdomain: 0x0
[    7.919860] ath: EEPROM indicates default country code should be used
[    7.919865] ath: doing EEPROM country->regdmn map search
[    7.919875] ath: country maps to regdmn code: 0x3a
[    7.919882] ath: Country alpha2 being used: US
[    7.919888] ath: Regpair used: 0x3a
[    7.924560] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[    7.925188] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[    8.089143] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[    8.089190] ath10k_pci 0001:01:00.0: Falling back to user helper
[    8.100033] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
[    8.104907] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[    8.117794] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.5.3-00050 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 5ae23169
[    8.181145] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:1 crc32 792a3d38
[    9.402366] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16  peers: 528  tid: 102
[    9.474601] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[    9.559629] ath: EEPROM regdomain: 0x0
[    9.559635] ath: EEPROM indicates default country code should be used
[    9.559640] ath: doing EEPROM country->regdmn map search
[    9.559649] ath: country maps to regdmn code: 0x3a
[    9.559655] ath: Country alpha2 being used: US
[    9.559660] ath: Regpair used: 0x3a
[   10.591701] dwmac1000: Master AXI performs any burst length
[   10.591767] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[   10.596384] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[   10.720923] dwmac1000: Master AXI performs any burst length
[   10.720962] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[   10.725419] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[   10.842661] usbcore: registered new interface driver usbfs
[   10.842761] usbcore: registered new interface driver hub
[   10.847107] usbcore: registered new device driver usb
[   10.876119] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   10.883259] ehci-platform: EHCI generic platform driver
[   10.900741] ehci-pci: EHCI PCI platform driver
[   10.947656] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   11.236455] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   11.236538] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[   11.241092] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[   11.248480] xhci-hcd xhci-hcd.0.auto: irq 169, io mem 0x11000000
[   11.257653] hub 1-0:1.0: USB hub found
[   11.263445] hub 1-0:1.0: 1 port detected
[   11.267210] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   11.271056] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[   11.276356] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[   11.284395] hub 2-0:1.0: USB hub found
[   11.292297] hub 2-0:1.0: 1 port detected
[   11.356524] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[   11.356572] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[   11.361142] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[   11.368571] xhci-hcd xhci-hcd.1.auto: irq 170, io mem 0x10000000
[   11.377721] hub 3-0:1.0: USB hub found
[   11.383522] hub 3-0:1.0: 1 port detected
[   11.387273] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[   11.391097] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[   11.396411] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[   11.404485] hub 4-0:1.0: USB hub found
[   11.412309] hub 4-0:1.0: 1 port detected
[   11.637856] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[   11.677872] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[   16.450037] xhci-hcd xhci-hcd.1.auto: remove, state 1
[   16.450075] usb usb4: USB disconnect, device number 1
[   16.454557] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered
[   16.459208] xhci-hcd xhci-hcd.1.auto: remove, state 1
[   16.464842] usb usb3: USB disconnect, device number 1
[   16.470305] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered
[   16.474869] xhci-hcd xhci-hcd.0.auto: remove, state 1
[   16.480639] usb usb2: USB disconnect, device number 1
[   16.485970] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
[   16.490865] xhci-hcd xhci-hcd.0.auto: remove, state 1
[   16.496266] usb usb1: USB disconnect, device number 1
[   16.501297] usb 1-1: USB disconnect, device number 2
[   16.507130] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
[   16.575264] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   16.575347] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[   16.579862] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[   16.587209] xhci-hcd xhci-hcd.0.auto: irq 169, io mem 0x11000000
[   16.596506] hub 1-0:1.0: USB hub found
[   16.602245] hub 1-0:1.0: 1 port detected
[   16.606029] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   16.609866] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[   16.615166] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[   16.623178] hub 2-0:1.0: USB hub found
[   16.631069] hub 2-0:1.0: 1 port detected
[   16.634908] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[   16.638691] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[   16.644052] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[   16.651511] xhci-hcd xhci-hcd.1.auto: irq 170, io mem 0x10000000
[   16.660748] hub 3-0:1.0: USB hub found
[   16.666394] hub 3-0:1.0: 1 port detected
[   16.670424] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[   16.674017] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[   16.679469] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[   16.687357] hub 4-0:1.0: USB hub found
[   16.695304] hub 4-0:1.0: 1 port detected
[   16.730681] SCSI subsystem initialized
[   16.816775] usbcore: registered new interface driver usb-storage
[   16.881957] libata version 3.00 loaded.
[   16.933149] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
[   16.933196] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[   16.937526] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst 
[   16.946919] scsi host0: ahci
[   16.954742] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 95
[   16.957923] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[   17.128881] usb-storage 1-1:1.0: USB Mass Storage device detected
[   17.132774] scsi host1: usb-storage 1-1:1.0
[   17.289232] ata1: SATA link down (SStatus 0 SControl 300)
[   17.412779] sdhci: Secure Digital Host Controller Interface driver
[   17.412801] sdhci: Copyright(c) Pierre Ossman
[   17.425082] sdhci-pltfm: SDHCI platform and OF driver helper
[   18.158265] scsi 1:0:0:0: Direct-Access     SanDisk  Cruzer           7.01 PQ: 0 ANSI: 0 CCS
[   18.159196] sd 1:0:0:0: [sda] 15695871 512-byte logical blocks: (8.04 GB/7.48 GiB)
[   18.165950] sd 1:0:0:0: [sda] Write Protect is off
[   18.166125] scsi 1:0:0:1: CD-ROM            SanDisk  Cruzer           7.01 PQ: 0 ANSI: 0
[   18.177974] sd 1:0:0:0: [sda] Mode Sense: 45 00 00 08
[   18.178173] sd 1:0:0:0: [sda] No Caching mode page found
[   18.186160] sd 1:0:0:0: [sda] Assuming drive cache: write through
[   18.194798]  sda: sda1
[   18.199168] sd 1:0:0:0: [sda] Attached SCSI removable disk
[   18.974551] device br0 entered promiscuous mode
[   19.036642] br0: port 1(vlan1) entered blocking state
[   19.036666] br0: port 1(vlan1) entered disabled state
[   19.041001] device vlan1 entered promiscuous mode
[   19.045708] device eth0 entered promiscuous mode
[   19.050530] br0: port 1(vlan1) entered blocking state
[   19.055086] br0: port 1(vlan1) entered forwarding state
[   19.092989] br0: port 2(vlan2) entered blocking state
[   19.095464] br0: port 2(vlan2) entered disabled state
[   19.100840] device vlan2 entered promiscuous mode
[   19.105568] br0: port 2(vlan2) entered blocking state
[   19.110293] br0: port 2(vlan2) entered forwarding state
[   19.122369] device br0 left promiscuous mode
[   19.124591] device br0 entered promiscuous mode
[   19.131816] device br0 left promiscuous mode
[   19.195819] ath: EEPROM regdomain: 0x8348
[   19.195825] ath: EEPROM indicates we should expect a country code
[   19.195829] ath: doing EEPROM country->regdmn map search
[   19.195833] ath: country maps to regdmn code: 0x3a
[   19.195836] ath: Country alpha2 being used: US
[   19.195839] ath: Regpair used: 0x3a
[   19.195843] ath: regdomain 0x8348 dynamically updated by user
[   19.195856] ath: EEPROM regdomain: 0x8348
[   19.195859] ath: EEPROM indicates we should expect a country code
[   19.195862] ath: doing EEPROM country->regdmn map search
[   19.195866] ath: country maps to regdmn code: 0x3a
[   19.195869] ath: Country alpha2 being used: US
[   19.195872] ath: Regpair used: 0x3a
[   19.195875] ath: regdomain 0x8348 dynamically updated by user
[   21.710543] EXT4-fs (sda1): Ignoring removed nobh option
[   21.711907] EXT4-fs (sda1): barriers disabled
[   21.716903] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: init_itable=0,nobarrier,nobh,barrier=0
[   23.517621] tun: Universal TUN/TAP device driver, 1.6
[   23.517641] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[  596.616296] br0: port 2(vlan2) entered disabled state
[  596.616382] br0: port 1(vlan1) entered disabled state
[  596.627285] device vlan2 left promiscuous mode
[  596.629272] br0: port 2(vlan2) entered disabled state
[  596.633582] device vlan1 left promiscuous mode
[  596.638608] device eth0 left promiscuous mode
[  596.642840] br0: port 1(vlan1) entered disabled state
[  596.850896] device br0 entered promiscuous mode
[  596.910143] br0: port 1(vlan1) entered blocking state
[  596.910165] br0: port 1(vlan1) entered disabled state
[  596.914376] device vlan1 entered promiscuous mode
[  596.919284] device eth0 entered promiscuous mode
[  596.923943] br0: port 1(vlan1) entered blocking state
[  596.928644] br0: port 1(vlan1) entered forwarding state
[  596.970524] br0: port 2(vlan2) entered blocking state
[  596.970548] br0: port 2(vlan2) entered disabled state
[  596.974749] device vlan2 entered promiscuous mode
[  596.979743] br0: port 2(vlan2) entered blocking state
[  596.984268] br0: port 2(vlan2) entered forwarding state
[  596.996443] device br0 left promiscuous mode
[  596.998778] device br0 entered promiscuous mode
[  597.005797] device br0 left promiscuous mode
[  597.058377] ath: EEPROM regdomain: 0x8348
[  597.058383] ath: EEPROM indicates we should expect a country code
[  597.058387] ath: doing EEPROM country->regdmn map search
[  597.058391] ath: country maps to regdmn code: 0x3a
[  597.058395] ath: Country alpha2 being used: US
[  597.058398] ath: Regpair used: 0x3a
[  597.058402] ath: regdomain 0x8348 dynamically updated by user
[  597.058416] ath: EEPROM regdomain: 0x8348
[  597.058418] ath: EEPROM indicates we should expect a country code
[  597.058422] ath: doing EEPROM country->regdmn map search
[  597.058425] ath: country maps to regdmn code: 0x3a
[  597.058428] ath: Country alpha2 being used: US
[  597.058431] ath: Regpair used: 0x3a
[  597.058434] ath: regdomain 0x8348 dynamically updated by user
[  601.103548] ath10k_pci 0000:01:00.0: init auto ack timing
[  602.591113] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16  peers: 528  tid: 102
[  602.755210] Core CLK 300
[  602.755223] Mac CLK 150
[  602.757000] br0: port 3(ath0) entered blocking state
[  602.759039] br0: port 3(ath0) entered disabled state
[  602.764377] device ath0 entered promiscuous mode
[  603.170353] br0: port 3(ath0) entered blocking state
[  603.170375] br0: port 3(ath0) entered forwarding state
[  603.230762] ath10k_pci 0001:01:00.0: init auto ack timing
[  604.546936] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16  peers: 528  tid: 102
[  604.705741] Core CLK 300
[  604.705756] Mac CLK 150
[  604.710589] br0: port 4(ath1) entered blocking state
[  604.710611] br0: port 4(ath1) entered disabled state
[  604.714939] device ath1 entered promiscuous mode
[  605.133409] br0: port 4(ath1) entered blocking state
[  605.133434] br0: port 4(ath1) entered forwarding state
[  759.498640] ath10k_pci 0000:01:00.0: HT: sta->rx_nss = 1 max_nss = 1
[  759.498668] ath10k_pci 0000:01:00.0: mac ht peer ec:88:92:6d:e8:e2 mcs cnt 8 nss 1
[  759.504613] ath10k_pci 0000:01:00.0: enable extended stats for peer ec:88:92:6d:e8:e2 on vdev 0
[  872.319675] ath10k_pci 0001:01:00.0: HT: sta->rx_nss = 1 max_nss = 1
[  872.319713] ath10k_pci 0001:01:00.0: mac ht peer ec:88:92:6d:e8:e2 mcs cnt 8 nss 1
[  872.325102] ath10k_pci 0001:01:00.0: VHT: sta->rx_nss = 1 max_nss = 1
[  872.332565] ath10k_pci 0001:01:00.0: mac vht peer ec:88:92:6d:e8:e2 max_mpdu 1048575 flags 0x2019001 peer_rx_nss_override 0x0
[  872.339742] ath10k_pci 0001:01:00.0: enable extended stats for peer ec:88:92:6d:e8:e2 on vdev 0
root@EA8500:~# date
Sun Jan  5 05:56:52 CST 2020
root@EA8500:~# exit
Connection to ea8500.mrjcd.com closed.
mrjcd@Deb:~$ ssh root@citadel-switch.mrjcd.com
DD-WRT v3.0-r41892 std (c) 2020 NewMedia-NET GmbH
Release: 01/05/20
Board: Netgear WNDR3700 V4
==========================================================
 
     ___  ___     _      _____  ______       ____  ___ 
    / _ \/ _ \___| | /| / / _ \/_  __/ _  __|_  / / _ \
   / // / // /___/ |/ |/ / , _/ / /   | |/ //_ <_/ // /
  /____/____/    |__/|__/_/|_| /_/    |___/____(_)___/ 
                                                     
                       DD-WRT v3.0
                   http://www.dd-wrt.com
 
==========================================================


BusyBox v1.31.1 (2020-01-05 05:08:53 +04) built-in shell (ash)

root@Citadel-Switch:~# ifconfig
br0       Link encap:Ethernet  HWaddr A4:2B:8C:0E:88:47  
          inet addr:10.72.28.51  Bcast:10.72.28.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:34144 errors:0 dropped:232 overruns:0 frame:0
          TX packets:31888 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:26373316 (25.1 MiB)  TX bytes:26606918 (25.3 MiB)

eth0      Link encap:Ethernet  HWaddr A4:2B:8C:0E:88:47  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:34158 errors:0 dropped:0 overruns:0 frame:0
          TX packets:34103 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:26990887 (25.7 MiB)  TX bytes:27200330 (25.9 MiB)
          Interrupt:4 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING MULTICAST  MTU:65536  Metric:1
          RX packets:78 errors:0 dropped:0 overruns:0 frame:0
          TX packets:78 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:10732 (10.4 KiB)  TX bytes:10732 (10.4 KiB)

tun2      Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
          inet addr:10.92.96.241  P-t-P:10.92.96.241  Mask:255.255.255.240
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:14014 errors:0 dropped:0 overruns:0 frame:0
          TX packets:17390 errors:0 dropped:44 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:7728161 (7.3 MiB)  TX bytes:17369612 (16.5 MiB)

vlan1     Link encap:Ethernet  HWaddr A4:2B:8C:0E:88:47  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:34158 errors:0 dropped:2 overruns:0 frame:0
          TX packets:31888 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:26376043 (25.1 MiB)  TX bytes:26606918 (25.3 MiB)

vlan2     Link encap:Ethernet  HWaddr A4:2B:8C:0E:88:48  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2215 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:457000 (446.2 KiB)

root@Citadel-Switch:~# dmesg
<5>[    0.000000] Linux version 3.18.140-d2 (root@linux) (gcc version 9.2.0 (OpenWrt GCC 9.2.0 r10890-7d542dc804) ) #64617 Sun Jan 5 05:08:33 +04 2020
<6>[    0.000000] bootconsole [early0] enabled
<6>[    0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
<4>[    0.000000] cpu srif ddr srif cpu 560 ddr 400 ahb 200
<6>[    0.000000] sys id = 2122 Atheros AR9344 ver 1 rev 1.2 (0x2122)
<6>[    0.000000] Determined physical RAM map:
<6>[    0.000000]  memory: 08000000 @ 00000000 (usable)
<4>[    0.000000] Zone ranges:
<4>[    0.000000]   Normal   [mem 0x00000000-0x07ffffff]
<4>[    0.000000] Movable zone start for each node
<4>[    0.000000] Early memory node ranges
<4>[    0.000000]   node   0: [mem 0x00000000-0x07ffffff]
<6>[    0.000000] Initmem setup node 0 [mem 0x00000000-0x07ffffff]
<7>[    0.000000] On node 0 totalpages: 32768
<7>[    0.000000] free_area_init_node: node 0, pgdat 803a6950, node_mem_map 81000000
<7>[    0.000000]   Normal zone: 256 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
<4>[    0.000000] Primary instruction cache 64kB, 4-way, VIPT, I-cache aliases, linesize 32 bytes.
<4>[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
<7>[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>[    0.000000] pcpu-alloc: [0] 0 
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
<5>[    0.000000] Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd init=/sbin/init
<6>[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
<6>[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
<6>[    0.000000] Writing ErrCtl register=00000000
<6>[    0.000000] Readback ErrCtl register=00000000
<4>[    0.000000] Memory: 125692K/131072K available (2732K kernel code, 172K rwdata, 548K rodata, 184K init, 176K bss, 5380K reserved, 0K cma-reserved)
<6>[    0.000000] NR_IRQS:83
<6>[    0.060000] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
<6>[    0.070000] pid_max: default: 32768 minimum: 301
<6>[    0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[    0.080000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[    0.090000] NET: Registered protocol family 16
<7>[    0.090000] ar71xx: using random MAC address for eth0
<6>[    0.300000] Switched to clocksource MIPS
<6>[    0.310000] NET: Registered protocol family 2
<6>[    0.310000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
<6>[    0.310000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
<6>[    0.320000] TCP: Hash tables configured (established 1024 bind 1024)
<6>[    0.320000] TCP: reno registered
<6>[    0.330000] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[    0.330000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[    0.340000] NET: Registered protocol family 1
<7>[    0.340000] PCI: CLS 0 bytes, default 32
<5>[    0.340000] gpio_proc: module loaded and /proc/gpio/ created (cool)
<6>[    0.350000] fixup WNDR3700v4 wifi led
<5>[    0.350000] wl0gpio_proc: module loaded and /proc/wl0gpio/ created
<6>[    0.360000] futex hash table entries: 256 (order: -1, 3072 bytes)
<6>[    0.370000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[    0.380000] msgmni has been set to 245
<6>[    0.380000] io scheduler noop registered
<6>[    0.390000] io scheduler deadline registered (default)
<6>[    0.390000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
<6>[    0.400000] console [ttyS0] disabled
<6>[    0.420000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
<6>[    0.430000] console [ttyS0] enabled
<6>[    0.440000] bootconsole [early0] disabled
<4>[    0.440000] Atheros on-chip NAND FLash Controller Driver, Version 0.1 (c) 2010 Atheros Communications, Ltd.
<4>[    0.460000] Ath Nand ID[87cad5e0]: 2c:f1:80:95:02
<4>[    0.460000] ONFI MICRON      MT29F1G08ABADAWP   
<4>[    0.470000] Micron
<0>[    1.480000] 
<0>[    1.480000] found squashfs at 0x800000
<5>[    1.480000] Creating 7 MTD partitions on "ath-nand":
<5>[    1.490000] 0x000000000000-0x000000080000 : "RedBoot"
<5>[    1.500000] 0x0000006c0000-0x000008000000 : "linux"
<5>[    3.550000] 0x000000800000-0x000001ee0000 : "rootfs"
<5>[    3.940000] mtd: partition "rootfs" set to be root filesystem
<5>[    3.950000] 0x000001ee0000-0x000008000000 : "ddwrt"
<5>[    5.590000] 0x000000340000-0x0000003c0000 : "nvram"
<5>[    5.600000] 0x000000080000-0x0000000c0000 : "board_config"
<5>[    5.610000] 0x000000000000-0x000008000000 : "fullflash"
<4>[    7.780000] ====== NAND Parameters ======
<4>[    7.780000] sc = 0x87cad400 bbt = 0x87d01800 bbt_size = 0x100 nf_ctrl = 0x344
<4>[    7.780000] page = 0x800 block = 0x20000 oob = 0x40
<4>[    7.830000] registering PCI controller with io_map_base unset
<6>[    7.830000] PCI host bridge to bus 0000:00
<6>[    7.840000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
<6>[    7.850000] pci_bus 0000:00: root bus resource [io  0x0000]
<6>[    7.850000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
<7>[    7.860000] pci 0000:00:00.0: [168c:0033] type 00 class 0x028000
<6>[    7.860000] pci 0000:00:00.0: fixup device configuration
<0>[    7.870000] bootstrap returns device 168C:33
<7>[    7.870000] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit]
<7>[    7.870000] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
<7>[    7.870000] pci 0000:00:00.0: supports D1
<7>[    7.870000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
<7>[    7.870000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
<6>[    7.870000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit]
<6>[    7.880000] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref]
<6>[    7.880000] pci 0000:00:00.0: using irq 72 for pin 1
<6>[    7.890000] libphy: Fixed MDIO Bus: probed
<6>[    7.890000] PPP generic driver version 2.4.2
<6>[    7.900000] PPP BSD Compression module registered
<6>[    7.900000] PPP Deflate Compression module registered
<6>[    7.910000] PPP MPPE Compression module registered
<6>[    7.910000] NET: Registered protocol family 24
<6>[    7.920000] u32 classifier
<6>[    7.930000]     Performance counters on
<6>[    7.930000]     input device check on
<6>[    7.930000]     Actions configured
<6>[    7.940000] Netfilter messages via NETLINK v0.30.
<6>[    7.940000] nf_conntrack version 0.5.0 (1963 buckets, 7852 max)
<4>[    7.950000] nf_conntrack_rtsp v0.7 loading
<4>[    7.950000] nf_nat_rtsp v0.7 loading
<6>[    7.960000] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    7.960000] TCP: westwood registered
<6>[    7.970000] TCP: hybla registered
<6>[    7.970000] TCP: vegas registered
<6>[    7.970000] NET: Registered protocol family 17
<6>[    7.980000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
<5>[    7.990000] Bridge firewalling registered
<6>[    8.000000] 8021q: 802.1Q VLAN Support v1.8
<5>[    8.000000] Key type dns_resolver registered
<5>[    8.020000] Key type encrypted registered
<6>[    8.020000] searching for nvram
<6>[    8.030000] nvram size = 524288
<6>[    8.070000] Atheros AR71xx hardware watchdog driver version 0.1.0
<6>[    8.080000] ar71xx-wdt: timeout=15 secs (max=107) ref freq=40000000
<6>[    8.100000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
<6>[    8.110000] Freeing unused kernel memory: 184K
<7>[   12.910000] ar71xx-wdt: enabling watchdog timer
<6>[   13.130000] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0
<6>[   13.860000] libphy: ag71xx_mdio: probed
<6>[   14.450000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316]
<6>[   14.460000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
<6>[   15.680000] Loading modules backported from Linux version wireless-drivers-next-for-davem-2017-09-01-0-geb464d4a8d09
<6>[   15.690000] Backport generated by backports.git backports-20160324-111-g97b8d7c4
<6>[   16.470000] eth0: link up (1000Mbps/Full duplex)
<7>[   17.150000] ath: EEPROM regdomain: 0x0
<7>[   17.150000] ath: EEPROM indicates default country code should be used
<7>[   17.150000] ath: doing EEPROM country->regdmn map search
<7>[   17.150000] ath: country maps to regdmn code: 0x3a
<7>[   17.150000] ath: Country alpha2 being used: US
<7>[   17.150000] ath: Regpair used: 0x3a
<7>[   17.170000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
<6>[   17.170000] ieee80211 phy0: Atheros AR9340 Rev:0 mem=0xb8100000, irq=78
<0>[   17.180000] 2 vs 0
<4>[   17.180000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
<7>[   17.190000] ath: EEPROM regdomain: 0x0
<7>[   17.190000] ath: EEPROM indicates default country code should be used
<7>[   17.190000] ath: doing EEPROM country->regdmn map search
<7>[   17.190000] ath: country maps to regdmn code: 0x3a
<7>[   17.190000] ath: Country alpha2 being used: US
<7>[   17.190000] ath: Regpair used: 0x3a
<7>[   17.210000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
<6>[   17.210000] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=72
<6>[   18.160000] usbcore: registered new interface driver usbfs
<6>[   18.170000] usbcore: registered new interface driver hub
<6>[   18.170000] usbcore: registered new device driver usb
<6>[   18.290000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[   18.330000] ar71xx-ehci ar71xx-ehci.0: Atheros AR91xx built-in EHCI controller
<6>[   18.340000] ar71xx-ehci ar71xx-ehci.0: new USB bus registered, assigned bus number 1
<4>[   18.350000] ehci_reset Intialize USB CONTROLLER in host mode: 13
<4>[   18.360000] ehci_reset Port Status 1c000000 
<6>[   18.390000] ar71xx-ehci ar71xx-ehci.0: irq 3, io mem 0x1b000000
<6>[   18.410000] ar71xx-ehci ar71xx-ehci.0: USB 2.0 started, EHCI 1.00
<6>[   18.410000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[   18.420000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   18.430000] usb usb1: Product: Atheros AR91xx built-in EHCI controller
<6>[   18.430000] usb usb1: Manufacturer: Linux 3.18.140-d2 ehci_hcd
<6>[   18.440000] usb usb1: SerialNumber: platform
<6>[   18.440000] hub 1-0:1.0: USB hub found
<6>[   18.450000] hub 1-0:1.0: 1 port detected
<6>[   18.480000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 2 is up
<6>[   18.480000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 3 is up
<6>[   18.490000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 4 is up
<6>[   18.770000] usb 1-1: new high-speed USB device number 2 using ar71xx-ehci
<6>[   18.920000] usb 1-1: New USB device found, idVendor=154b, idProduct=0053
<6>[   18.920000] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[   18.930000] usb 1-1: Product: USB 2.0 FD
<6>[   18.940000] usb 1-1: Manufacturer: PNY Technologies
<6>[   18.940000] usb 1-1: SerialNumber: 000000006CB8E120
<5>[   19.280000] SCSI subsystem initialized
<6>[   19.700000] usb-storage 1-1:1.0: USB Mass Storage device detected
<6>[   19.700000] scsi host0: usb-storage 1-1:1.0
<6>[   19.710000] usbcore: registered new interface driver usb-storage
<5>[   20.710000] scsi 0:0:0:0: Direct-Access     PNY      USB 2.0 FD       0.00 PQ: 0 ANSI: 2
<5>[   20.720000] sd 0:0:0:0: [sda] 31711232 512-byte logical blocks: (16.2 GB/15.1 GiB)
<5>[   20.720000] sd 0:0:0:0: [sda] Write Protect is off
<7>[   20.730000] sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00
<3>[   20.730000] sd 0:0:0:0: [sda] Asking for cache data failed
<3>[   20.740000] sd 0:0:0:0: [sda] Assuming drive cache: write through
<6>[   20.750000]  sda: sda1
<5>[   20.770000] sd 0:0:0:0: [sda] Attached SCSI removable disk
<6>[   22.010000] device br0 entered promiscuous mode
<6>[   22.110000] device vlan1 entered promiscuous mode
<6>[   22.110000] device eth0 entered promiscuous mode
<6>[   22.120000] br0: port 1(vlan1) entered forwarding state
<6>[   22.120000] br0: port 1(vlan1) entered forwarding state
<6>[   22.200000] device vlan2 entered promiscuous mode
<6>[   22.210000] br0: port 2(vlan2) entered forwarding state
<6>[   22.210000] br0: port 2(vlan2) entered forwarding state
<6>[   22.230000] device br0 left promiscuous mode
<6>[   22.240000] device br0 entered promiscuous mode
<6>[   22.270000] device br0 left promiscuous mode
<7>[   22.410000] ath: EEPROM regdomain: 0x8348
<7>[   22.410000] ath: EEPROM indicates we should expect a country code
<7>[   22.410000] ath: doing EEPROM country->regdmn map search
<7>[   22.410000] ath: country maps to regdmn code: 0x3a
<7>[   22.410000] ath: Country alpha2 being used: US
<7>[   22.410000] ath: Regpair used: 0x3a
<7>[   22.410000] ath: regdomain 0x8348 dynamically updated by user
<7>[   22.410000] ath: EEPROM regdomain: 0x8348
<7>[   22.410000] ath: EEPROM indicates we should expect a country code
<7>[   22.410000] ath: doing EEPROM country->regdmn map search
<7>[   22.410000] ath: country maps to regdmn code: 0x3a
<7>[   22.410000] ath: Country alpha2 being used: US
<7>[   22.410000] ath: Regpair used: 0x3a
<7>[   22.410000] ath: regdomain 0x8348 dynamically updated by user
<4>[   25.870000] EXT4-fs (sda1): Ignoring removed nobh option
<6>[   25.880000] EXT4-fs (sda1): barriers disabled
<6>[   26.930000] EXT4-fs (sda1): recovery complete
<6>[   26.950000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: init_itable=0,nobarrier,nobh,barrier=0
<5>[   27.870000] random: startservices urandom read with 121 bits of entropy available
<6>[   28.480000] tun: Universal TUN/TAP device driver, 1.6
<6>[   28.480000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[   31.050000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 1 is up
<5>[   31.730000] random: nonblocking pool is initialized
<6>[   33.310000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
<6>[   37.160000] br0: port 1(vlan1) entered forwarding state
<6>[   37.240000] br0: port 2(vlan2) entered forwarding state
root@Citadel-Switch:~# date
Sun Jan  5 05:57:26 CST 2020
root@Citadel-Switch:~# exit
Connection to citadel-switch.mrjcd.com closed.
mrjcd@Deb:~$ ssh root@160nl-switch.mrjcd.com
DD-WRT v3.0-r41892 std (c) 2020 NewMedia-NET GmbH
Release: 01/05/20
Board: Linksys WRT160NL
==========================================================
 
     ___  ___     _      _____  ______       ____  ___ 
    / _ \/ _ \___| | /| / / _ \/_  __/ _  __|_  / / _ \
   / // / // /___/ |/ |/ / , _/ / /   | |/ //_ <_/ // /
  /____/____/    |__/|__/_/|_| /_/    |___/____(_)___/ 
                                                     
                       DD-WRT v3.0
                   http://www.dd-wrt.com
 
==========================================================


BusyBox v1.31.1 (2020-01-05 02:59:33 +04) built-in shell (ash)

root@160nl-switch:~# ifconfig
br0       Link encap:Ethernet  HWaddr 68:7F:74:15:70:25  
          inet addr:10.72.28.54  Bcast:10.72.28.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3295 errors:0 dropped:277 overruns:0 frame:0
          TX packets:538 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:592010 (578.1 KiB)  TX bytes:209039 (204.1 KiB)

eth0      Link encap:Ethernet  HWaddr 68:7F:74:15:70:25  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3296 errors:0 dropped:0 overruns:0 frame:0
          TX packets:538 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:638214 (623.2 KiB)  TX bytes:209039 (204.1 KiB)
          Interrupt:4 

eth1      Link encap:Ethernet  HWaddr 68:7F:74:15:70:26  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:5 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING MULTICAST  MTU:65536  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

root@160nl-switch:~# dmesg
<5>[    0.000000] Linux version 3.10.108-d8 (root@linux) (gcc version 9.2.0 (OpenWrt GCC 9.2.0 r10890-7d542dc804) ) #33029 Sun Jan 5 02:59:14 +04 2020
<4>[    0.000000] flash_size passed from bootloader = 8
<6>[    0.000000] bootconsole [early0] enabled
<6>[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
<6>[    0.000000] booting platform Atheros AR9130 rev 2 (0xb8)
<6>[    0.000000] Determined physical RAM map:
<6>[    0.000000]  memory: 02000000 @ 00000000 (usable)
<4>[    0.000000] Zone ranges:
<4>[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
<4>[    0.000000] Movable zone start for each node
<4>[    0.000000] Early memory node ranges
<4>[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
<7>[    0.000000] On node 0 totalpages: 8192
<7>[    0.000000] free_area_init_node: node 0, pgdat 802f6f80, node_mem_map 81000000
<7>[    0.000000]   Normal zone: 64 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 8192 pages, LIFO batch:0
<4>[    0.000000] Primary instruction cache 64kB, 4-way, VIPT, I-cache aliases, linesize 32 bytes.
<4>[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
<7>[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>[    0.000000] pcpu-alloc: [0] 0 
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
<5>[    0.000000] Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd init=/sbin/init
<6>[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
<6>[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Writing ErrCtl register=00000000
<6>[    0.000000] Readback ErrCtl register=00000000
<6>[    0.000000] Memory: 28968k/32768k available (2331k kernel code, 3800k reserved, 401k data, 208k init, 0k highmem)
<6>[    0.000000] NR_IRQS:83
<0>[    0.000000] irq init done
<4>[    0.000000] plat_time_init: plat time init done
<6>[    0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
<6>[    0.080000] pid_max: default: 32768 minimum: 301
<6>[    0.080000] Mount-cache hash table entries: 512
<6>[    0.090000] NET: Registered protocol family 16
<4>[    0.100000] Can't analyze schedule() prologue at 80066e08
<6>[    0.120000] bio: create slab <bio-0> at 0
<5>[    0.130000] SCSI subsystem initialized
<6>[    0.130000] usbcore: registered new interface driver usbfs
<6>[    0.140000] usbcore: registered new interface driver hub
<6>[    0.140000] usbcore: registered new device driver usb
<6>[    0.150000] Switching to clocksource MIPS
<6>[    0.150000] NET: Registered protocol family 2
<6>[    0.160000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
<6>[    0.160000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
<6>[    0.170000] TCP: Hash tables configured (established 512 bind 512)
<6>[    0.170000] TCP: reno registered
<6>[    0.180000] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[    0.180000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[    0.190000] NET: Registered protocol family 1
<5>[    0.190000] gpio_proc: module loaded and /proc/gpio/ created
<6>[    0.200000] Register LED Device
<5>[    0.200000] wl0gpio_proc: module loaded and /proc/wl0gpio/ created
<4>[    0.210000] AR7100 GPIOC major 0
<6>[    0.210000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[    0.220000] msgmni has been set to 56
<6>[    0.230000] io scheduler noop registered
<6>[    0.230000] io scheduler deadline registered (default)
<6>[    0.230000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
<6>[    0.260000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 19) is a 16550A
<6>[    0.270000] console [ttyS0] enabled, bootconsole disabled
<0>[    0.280000] guessed flashsize = 8M
<0>[    0.290000] scanning for root partition
<0>[    0.290000] WRT160NL/E2100L uboot detected
<0>[    0.290000] bootloader size = 40000
<0>[    0.300000] 
<0>[    0.300000] found squashfs at 192000
<5>[    0.310000] Creating 8 MTD partitions on "ar7100-nor0":
<5>[    0.310000] 0x000000000000-0x000000040000 : "RedBoot"
<5>[    0.320000] 0x000000040000-0x0000007e0000 : "linux"
<5>[    0.330000] 0x000000192000-0x000000790000 : "rootfs"
<4>[    0.330000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
<5>[    0.350000] mtd: partition "rootfs" set to be root filesystem
<5>[    0.350000] 0x000000790000-0x0000007e0000 : "ddwrt"
<5>[    0.360000] 0x0000007e0000-0x0000007f0000 : "nvram"
<5>[    0.360000] 0x0000007f0000-0x000000800000 : "FIS directory"
<5>[    0.370000] 0x0000007f0000-0x000000800000 : "board_config"
<5>[    0.380000] 0x000000000000-0x000000800000 : "fullflash"
<4>[    0.390000] ->Oops: flash id 0xc22017 . 
<6>[    0.790000] PPP generic driver version 2.4.2
<6>[    0.790000] PPP BSD Compression module registered
<6>[    0.800000] PPP Deflate Compression module registered
<6>[    0.800000] PPP MPPE Compression module registered
<6>[    0.810000] NET: Registered protocol family 24
<6>[    0.810000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[    0.850000] ar71xx-ehci ar71xx-ehci.0: Atheros AR91xx built-in EHCI controller
<6>[    0.860000] ar71xx-ehci ar71xx-ehci.0: new USB bus registered, assigned bus number 1
<6>[    0.900000] ar71xx-ehci ar71xx-ehci.0: irq 3, io mem 0x1b000000
<6>[    0.920000] ar71xx-ehci ar71xx-ehci.0: USB 2.0 started, EHCI 1.00
<6>[    0.920000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    0.930000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    0.940000] usb usb1: Product: Atheros AR91xx built-in EHCI controller
<6>[    0.940000] usb usb1: Manufacturer: Linux 3.10.108-d8 ehci_hcd
<6>[    0.950000] usb usb1: SerialNumber: platform
<6>[    0.950000] hub 1-0:1.0: USB hub found
<6>[    0.960000] hub 1-0:1.0: 1 port detected
<6>[    0.970000] u32 classifier
<6>[    0.970000]     Performance counters on
<6>[    0.980000]     input device check on
<6>[    0.980000]     Actions configured
<6>[    0.980000] Netfilter messages via NETLINK v0.30.
<6>[    0.990000] nf_conntrack version 0.5.0 (452 buckets, 1808 max)
<4>[    1.000000] nf_conntrack_rtsp v0.7 loading
<4>[    1.000000] nf_nat_rtsp v0.7 loading
<6>[    1.000000] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    1.010000] TCP: westwood registered
<6>[    1.010000] TCP: hybla registered
<6>[    1.020000] TCP: vegas registered
<6>[    1.020000] NET: Registered protocol family 17
<5>[    1.030000] Bridge firewalling registered
<6>[    1.030000] 8021q: 802.1Q VLAN Support v1.8
<6>[    1.030000] searching for nvram
<6>[    1.040000] nvram size = 65536
<6>[    1.070000] Atheros AR71xx hardware watchdog driver version 0.1.0
<6>[    1.080000] ar71xx-wdt: timeout=15 secs (max=21) ref freq=200000000
<6>[    1.090000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
<6>[    1.100000] Freeing unused kernel memory: 208K
<6>[    1.340000] usb 1-1: new high-speed USB device number 2 using ar71xx-ehci
<6>[    1.650000] usb 1-1: New USB device found, idVendor=0781, idProduct=5598
<6>[    1.660000] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[    1.670000] usb 1-1: Product: USB Flash Drive
<6>[    1.670000] usb 1-1: SerialNumber: 4C530001281207102504
<7>[    4.730000] ar71xx-wdt: enabling watchdog timer
<6>[    4.810000] libphy: ag71xx_mdio: probed
<6>[    5.140000] Registering RTL8306SD switch with Chip ID: 0x5988, version: 0x0000
<6>[    5.140000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=00008306, driver=Realtek RTL8306S]
<6>[    5.150000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RMII
<6>[    5.480000] ag71xx ag71xx.1: connected to PHY at ag71xx-mdio.0:04 [uid=00008306, driver=Realtek RTL8306S]
<6>[    5.490000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:RMII
<6>[    5.670000] Loading modules backported from Linux version wireless-drivers-next-for-davem-2017-09-01-0-geb464d4a8d09
<6>[    5.680000] Backport generated by backports.git backports-20160324-111-g97b8d7c4
<7>[    6.540000] ath: EEPROM regdomain: 0x0
<7>[    6.540000] ath: EEPROM indicates default country code should be used
<7>[    6.540000] ath: doing EEPROM country->regdmn map search
<7>[    6.540000] ath: country maps to regdmn code: 0x3a
<7>[    6.540000] ath: Country alpha2 being used: US
<7>[    6.540000] ath: Regpair used: 0x3a
<7>[    6.580000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
<6>[    6.580000] ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2122 RF Rev:a2 mem=0xb80c0000, irq=2
<7>[    7.150000] ar71xx: pll_reg 0xb8050014: 0x13000a44
<6>[    7.150000] eth0: link up (100Mbps/Full duplex)
<6>[    7.800000] usb-storage 1-1:1.0: USB Mass Storage device detected
<6>[    7.810000] scsi0 : usb-storage 1-1:1.0
<6>[    7.820000] usbcore: registered new interface driver usb-storage
<5>[    8.820000] scsi 0:0:0:0: Direct-Access              USB Flash Drive  1.00 PQ: 0 ANSI: 6
<5>[    8.830000] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[    8.840000] sd 0:0:0:0: [sda] 30629376 512-byte logical blocks: (15.6 GB/14.6 GiB)
<5>[    8.850000] sd 0:0:0:0: [sda] Write Protect is off
<7>[    8.850000] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
<5>[    8.850000] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
<6>[    8.870000]  sda: sda1
<5>[    8.880000] sd 0:0:0:0: [sda] Attached SCSI removable disk
<6>[    9.670000] device br0 entered promiscuous mode
<6>[    9.720000] eth0: link down
<6>[    9.840000] device eth0 entered promiscuous mode
<6>[   10.010000] device eth1 entered promiscuous mode
<6>[   10.020000] br0: port 1(eth0) entered forwarding state
<6>[   10.030000] br0: port 1(eth0) entered forwarding state
<6>[   10.030000] device br0 left promiscuous mode
<6>[   10.050000] device br0 entered promiscuous mode
<6>[   10.090000] device br0 left promiscuous mode
<7>[   10.270000] ath: EEPROM regdomain: 0x8348
<7>[   10.270000] ath: EEPROM indicates we should expect a country code
<7>[   10.270000] ath: doing EEPROM country->regdmn map search
<7>[   10.270000] ath: country maps to regdmn code: 0x3a
<7>[   10.270000] ath: Country alpha2 being used: US
<7>[   10.270000] ath: Regpair used: 0x3a
<7>[   10.270000] ath: regdomain 0x8348 dynamically updated by user
<6>[   10.650000] br0: port 1(eth0) entered disabled state
<4>[   10.680000] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
<4>[   10.700000] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
<7>[   11.180000] ar71xx: pll_reg 0xb8050014: 0x13000a44
<6>[   11.180000] eth0: link up (100Mbps/Full duplex)
<6>[   11.180000] br0: port 1(eth0) entered forwarding state
<6>[   11.190000] br0: port 1(eth0) entered forwarding state
<6>[   17.100000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
<6>[   26.240000] br0: port 1(eth0) entered forwarding state
root@160nl-switch:~# date
Sun Jan  5 05:58:04 CST 2020
root@160nl-switch:~# uptime
 05:58:10 up 33 min,  load average: 0.11, 0.04, 0.05
root@160nl-switch:~# exit
Connection to 160nl-switch.mrjcd.com closed.
mrjcd@Deb:~$