mrjcd@Deb:~$ ssh root@ea8500.mrjcd.com
DD-WRT v3.0-r41954 std (c) 2020 NewMedia-NET GmbH
Release: 01/09/20
Board: Linksys EA8500
==========================================================
___ ___ _ _____ ______ ____ ___
/ _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \
/ // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // /
/____/____/ |__/|__/_/|_| /_/ |___/____(_)___/
DD-WRT v3.0
http://www.dd-wrt.com
==========================================================
BusyBox v1.31.1 (2020-01-09 06:50:50 +03) built-in shell (ash)
root@EA8500:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.208 (root@server2) (gcc version 9.2.0 (OpenWrt GCC 9.2.0 r10880-cb3c4c713d) ) #507 SMP Mon Jan 6 19:52:23 +03 2020
[ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt:Machine model: Linksys EA8500 WiFi Router
[ 0.000000] OF: fdt:Ignoring memory range 0x41500000 - 0x42000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 122880
[ 0.000000] free_area_init_node: node 0, pgdat c0b2d1c0, node_mem_map ddc39000
[ 0.000000] Normal zone: 960 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 122880 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 12 pages/cpu s18892 r8192 d22068 u49152
[ 0.000000] pcpu-alloc: s18892 r8192 d22068 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920
[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:16
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 478240K/491520K available (5120K kernel code, 183K rwdata, 1028K rodata, 1024K init, 407K bss, 13280K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xde800000 - 0xff800000 ( 528 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc0800000 (6112 kB)
[ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
[ 0.000000] .data : 0xc0b00000 - 0xc0b2dea8 ( 184 kB)
[ 0.000000] .bss : 0xc0b2f000 - 0xc0b94ebc ( 408 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[ 0.000008] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[ 0.000021] Switching to timer-based delay loop, resolution 160ns
[ 0.000193] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[ 0.000216] pid_max: default: 32768 minimum: 301
[ 0.000327] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000342] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000925] CPU: Testing write buffer coherency: ok
[ 0.001218] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001268] Setting up static identity map for 0x42300000 - 0x4230003c
[ 0.004347] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.004540] Brought up 2 CPUs
[ 0.004559] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[ 0.004569] CPU: All CPU(s) started in SVC mode.
[ 0.017866] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[ 0.018067] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.018094] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.018176] pinctrl core: initialized pinctrl subsystem
[ 0.019318] NET: Registered protocol family 16
[ 0.019680] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.051770] cpuidle: using governor ladder
[ 0.104714] msm_bus_fabric_init_driver
[ 0.105797] pps_core: LinuxPPS API ver. 1 registered
[ 0.105811] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.105843] PTP clock support registered
[ 0.107451] clocksource: Switched to clocksource dg_timer
[ 0.111748] NET: Registered protocol family 2
[ 0.112386] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.112425] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.112480] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.112534] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.112557] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.112729] NET: Registered protocol family 1
[ 0.112774] PCI: CLS 0 bytes, default 64
[ 0.116861] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.126826] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.132500] cryptodev: driver 1.9 loaded.
[ 0.132537] io scheduler noop registered
[ 0.132551] io scheduler deadline registered (default)
[ 0.134300] 1b500000.pci supply vdda not found, using dummy regulator
[ 0.134402] 1b500000.pci supply vdda_phy not found, using dummy regulator
[ 0.134499] 1b500000.pci supply vdda_refclk not found, using dummy regulator
[ 0.135308] OF: PCI: host bridge /soc/pci@1b500000 ranges:
[ 0.135349] OF: PCI: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[ 0.135375] OF: PCI: MEM 0x08000000..0x0fdfffff -> 0x08000000
[ 0.237836] qcom-pcie 1b500000.pci: link up
[ 0.238040] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[ 0.238063] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.238081] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
[ 0.238096] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[ 0.238148] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.238300] pci 0000:00:00.0: supports D1
[ 0.238311] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.238610] PCI: bus0: Fast back to back transfers disabled
[ 0.238938] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.239184] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.240340] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.241004] PCI: bus1: Fast back to back transfers disabled
[ 0.241291] pci 0000:00:00.0: BAR 14: assigned [mem 0x08000000-0x081fffff]
[ 0.241316] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[ 0.241451] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.241473] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
[ 0.241882] aer 0000:00:00.0:pcie002: service driver aer loaded
[ 0.242359] 1b700000.pci supply vdda not found, using dummy regulator
[ 0.242458] 1b700000.pci supply vdda_phy not found, using dummy regulator
[ 0.242559] 1b700000.pci supply vdda_refclk not found, using dummy regulator
[ 0.243338] OF: PCI: host bridge /soc/pci@1b700000 ranges:
[ 0.243372] OF: PCI: IO 0x31e00000..0x31efffff -> 0x31e00000
[ 0.243397] OF: PCI: MEM 0x2e000000..0x31dfffff -> 0x2e000000
[ 0.347821] qcom-pcie 1b700000.pci: link up
[ 0.348002] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[ 0.348020] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.348042] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[ 0.348086] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.348213] pci 0001:00:00.0: supports D1
[ 0.348223] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[ 0.348501] PCI: bus0: Fast back to back transfers disabled
[ 0.348809] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.349034] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.350101] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.350732] PCI: bus1: Fast back to back transfers disabled
[ 0.351121] pci 0001:00:00.0: BAR 14: assigned [mem 0x2e000000-0x2e1fffff]
[ 0.351144] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[ 0.351266] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 0.351285] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
[ 0.351650] aer 0001:00:00.0:pcie002: service driver aer loaded
[ 0.352466] deviceless supply s1b not found, using dummy regulator
[ 0.354058] L2 @ QSB rate. Forcing new rate.
[ 0.354224] L2 @ 800000 KHz
[ 0.354331] CPU0 @ 800000 KHz
[ 0.354341] CPU1 @ QSB rate. Forcing new rate.
[ 0.354461] CPU1 @ 800000 KHz
[ 0.356598] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[ 0.358331] serial8250_init
[ 0.358345] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.359338] msm_serial 16340000.serial: msm_serial: detected port #0
[ 0.359414] msm_serial 16340000.serial: uartclk = 7372800
[ 0.359474] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 168, base_baud = 460800) is a MSM
[ 0.359507] msm_serial: console setup on port #0
[ 1.051779] console [ttyMSM0] enabled
[ 1.056482] msm_serial: driver initialized
[ 1.061714] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
[ 1.063856] nand: AMD/Spansion S34MS01G2
[ 1.070446] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.074712] 19 ofpart partitions found on MTD device qcom_nand.0
[ 1.081726] Creating 19 MTD partitions on "qcom_nand.0":
[ 1.087882] 0x000000000000-0x000000040000 : "SBL1"
[ 1.094437] 0x000000040000-0x000000180000 : "MIBIB"
[ 1.100301] 0x000000180000-0x0000002c0000 : "SBL2"
[ 1.104992] 0x0000002c0000-0x000000540000 : "SBL3"
[ 1.108002] random: fast init done
[ 1.115612] 0x000000540000-0x000000660000 : "DDRCONFIG"
[ 1.118056] 0x000000660000-0x000000780000 : "SSD"
[ 1.122977] 0x000000780000-0x000000a00000 : "TZ"
[ 1.129704] 0x000000a00000-0x000000c80000 : "RPM"
[ 1.134389] 0x000000c80000-0x000000dc0000 : "art"
[ 1.137299] 0x000000dc0000-0x000000ec0000 : "APPSBL"
[ 1.141776] 0x000000ec0000-0x000000f00000 : "u_env"
[ 1.145711] 0x000000f00000-0x000000f40000 : "s_env"
[ 1.150307] 0x000000f40000-0x000000f80000 : "devinfo"
[ 1.155113] 0x000000f80000-0x000003780000 : "linux"
[ 1.213016] 0x000001280000-0x000003780000 : "rootfs"
[ 1.263559] mtd: partition "rootfs" set to be root filesystem
[ 1.263590] 0x000003780000-0x000005f40000 : "linux2"
[ 1.321461] 0x000003a80000-0x000005f40000 : "rootfs2"
[ 1.370480] 0x000005f40000-0x000005f80000 : "nvram"
[ 1.371738] 0x000005f80000-0x000008000000 : "ddwrt"
[ 1.395463] random: crng init done
[ 1.418996] libphy: GPIO Bitbanged MDIO: probed
[ 1.422200] libphy: Fixed MDIO Bus: probed
[ 1.443246] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
[ 2.214819] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 2.214845] Ring mode enabled
[ 2.218925] DMA HW capability register supported
[ 2.221796] Enhanced/Alternate descriptors
[ 2.227436] Enabled extended descriptors
[ 2.230481] RX Checksum Offload Engine supported
[ 2.234564] COE Type 2
[ 2.239316] TX Checksum insertion supported
[ 2.241505] Wake-Up On Lan supported
[ 2.246023] eth%d: device MAC address 00:06:3b:01:41:00
[ 2.249659] Enable RX Mitigation via HW Watchdog Timer
[ 2.255886] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 2.259908] Ring mode enabled
[ 2.265028] DMA HW capability register supported
[ 2.268060] Enhanced/Alternate descriptors
[ 2.273622] Enabled extended descriptors
[ 2.276581] RX Checksum Offload Engine supported
[ 2.280804] COE Type 2
[ 2.285433] TX Checksum insertion supported
[ 2.287770] Wake-Up On Lan supported
[ 2.292208] eth%d: device MAC address 00:03:7f:ba:db:02
[ 2.295766] Enable RX Mitigation via HW Watchdog Timer
[ 2.301665] i2c /dev entries driver
[ 2.306604] Calibration not found.
[ 2.310586] CPUidle arm: CPU 0 failed to init idle CPU ops
[ 2.313416] GACT probability NOT on
[ 2.318522] Mirror/redirect action on
[ 2.321832] Simple TC action Loaded
[ 2.326188] netem: version 1.3
[ 2.329040] u32 classifier
[ 2.332046] Performance counters on
[ 2.334740] input device check on
[ 2.338535] Actions configured
[ 2.342299] Netfilter messages via NETLINK v0.30.
[ 2.345857] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 2.351041] nf_conntrack_rtsp v0.7 loading
[ 2.356641] xt_time: kernel timezone is -0000
[ 2.360456] ip_set: protocol 6
[ 2.364966] gre: GRE over IPv4 demultiplexor driver
[ 2.368167] nf_nat_rtsp v0.7 loading
[ 2.372528] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.376504] NET: Registered protocol family 17
[ 2.381771] Bridge firewalling registered
[ 2.385872] 8021q: 802.1Q VLAN Support v1.8
[ 2.390163] Registering SWP/SWPB emulation handler
[ 2.403563] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
[ 2.422091] s1a: Bringing 0uV into 1050000-1050000uV
[ 2.422373] s1b: Bringing 0uV into 1050000-1050000uV
[ 2.426340] s2a: Bringing 0uV into 800000-800000uV
[ 2.431371] s2b: Bringing 0uV into 800000-800000uV
[ 2.439595] trying to register driver cpufreq-dt
[ 2.441981] searching for nvram
[ 2.445237] nvram size = 262144
[ 2.487976] no valid UBI magic found inside mtd13
[ 2.488008] hctosys: unable to open rtc device (rtc0)
[ 2.496713] VFS: Mounted root (squashfs filesystem) readonly on device 31:16.
[ 2.498343] Freeing unused kernel memory: 1024K
[ 5.556297] Loading modules backported from Linux version wireless-drivers-next-for-davem-2017-09-01-0-geb464d4a8d09
[ 5.556329] Backport generated by backports.git backports-20160324-111-g97b8d7c4
[ 6.062019] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 6.062653] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 6.219232] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[ 6.219268] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 6.553567] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
[ 6.553609] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[ 6.565267] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.5.3-00050 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 5ae23169
[ 6.634270] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:2 crc32 792a3d38
[ 7.859331] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 528 tid: 102
[ 7.933455] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[ 8.020460] ath: EEPROM regdomain: 0x0
[ 8.020469] ath: EEPROM indicates default country code should be used
[ 8.020477] ath: doing EEPROM country->regdmn map search
[ 8.020490] ath: country maps to regdmn code: 0x3a
[ 8.020499] ath: Country alpha2 being used: US
[ 8.020507] ath: Regpair used: 0x3a
[ 8.026689] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[ 8.027352] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 8.199142] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[ 8.199188] ath10k_pci 0001:01:00.0: Falling back to user helper
[ 8.210122] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
[ 8.214909] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[ 8.229227] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.5.3-00050 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 5ae23169
[ 8.291265] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:1 crc32 792a3d38
[ 9.512620] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 528 tid: 102
[ 9.584534] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[ 9.669042] ath: EEPROM regdomain: 0x0
[ 9.669046] ath: EEPROM indicates default country code should be used
[ 9.669049] ath: doing EEPROM country->regdmn map search
[ 9.669056] ath: country maps to regdmn code: 0x3a
[ 9.669059] ath: Country alpha2 being used: US
[ 9.669063] ath: Regpair used: 0x3a
[ 10.745570] dwmac1000: Master AXI performs any burst length
[ 10.745639] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 10.750349] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[ 10.891000] dwmac1000: Master AXI performs any burst length
[ 10.891040] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 10.895497] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 11.012445] usbcore: registered new interface driver usbfs
[ 11.012542] usbcore: registered new interface driver hub
[ 11.016892] usbcore: registered new device driver usb
[ 11.045958] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 11.053124] ehci-platform: EHCI generic platform driver
[ 11.070630] ehci-pci: EHCI PCI platform driver
[ 11.117852] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 11.416454] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 11.416535] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 11.421060] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 11.428481] xhci-hcd xhci-hcd.0.auto: irq 169, io mem 0x11000000
[ 11.437644] hub 1-0:1.0: USB hub found
[ 11.443433] hub 1-0:1.0: 1 port detected
[ 11.447225] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 11.451022] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 11.456367] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 11.464404] hub 2-0:1.0: USB hub found
[ 11.472251] hub 2-0:1.0: 1 port detected
[ 11.536495] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 11.536545] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 11.541123] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 11.548544] xhci-hcd xhci-hcd.1.auto: irq 170, io mem 0x10000000
[ 11.557694] hub 3-0:1.0: USB hub found
[ 11.563516] hub 3-0:1.0: 1 port detected
[ 11.567262] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 11.571102] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 11.576377] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 11.584466] hub 4-0:1.0: USB hub found
[ 11.592281] hub 4-0:1.0: 1 port detected
[ 11.797839] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 11.837843] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 16.630229] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 16.630265] usb usb4: USB disconnect, device number 1
[ 16.634743] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered
[ 16.639411] xhci-hcd xhci-hcd.1.auto: remove, state 1
[ 16.645033] usb usb3: USB disconnect, device number 1
[ 16.650499] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered
[ 16.655065] xhci-hcd xhci-hcd.0.auto: remove, state 1
[ 16.660849] usb usb2: USB disconnect, device number 1
[ 16.666568] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
[ 16.671489] xhci-hcd xhci-hcd.0.auto: remove, state 1
[ 16.676457] usb usb1: USB disconnect, device number 1
[ 16.681486] usb 1-1: USB disconnect, device number 2
[ 16.688809] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
[ 16.745177] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 16.745263] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 16.749768] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 16.757122] xhci-hcd xhci-hcd.0.auto: irq 169, io mem 0x11000000
[ 16.766444] hub 1-0:1.0: USB hub found
[ 16.772166] hub 1-0:1.0: 1 port detected
[ 16.775921] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 16.779764] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 16.785091] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 16.793098] hub 2-0:1.0: USB hub found
[ 16.800982] hub 2-0:1.0: 1 port detected
[ 16.804823] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 16.808603] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 16.813956] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[ 16.821425] xhci-hcd xhci-hcd.1.auto: irq 170, io mem 0x10000000
[ 16.830659] hub 3-0:1.0: USB hub found
[ 16.836309] hub 3-0:1.0: 1 port detected
[ 16.840288] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 16.843932] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 16.849393] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 16.857269] hub 4-0:1.0: USB hub found
[ 16.865219] hub 4-0:1.0: 1 port detected
[ 16.900690] SCSI subsystem initialized
[ 16.986801] usbcore: registered new interface driver usb-storage
[ 17.051894] libata version 3.00 loaded.
[ 17.103157] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
[ 17.103206] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 17.107534] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
[ 17.116915] scsi host0: ahci
[ 17.124740] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 95
[ 17.127825] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 17.299010] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 17.302632] scsi host1: usb-storage 1-1:1.0
[ 17.459209] ata1: SATA link down (SStatus 0 SControl 300)
[ 17.583506] sdhci: Secure Digital Host Controller Interface driver
[ 17.583527] sdhci: Copyright(c) Pierre Ossman
[ 17.595795] sdhci-pltfm: SDHCI platform and OF driver helper
[ 18.318738] scsi 1:0:0:0: Direct-Access USB Flash Drive 1.00 PQ: 0 ANSI: 6
[ 18.320277] sd 1:0:0:0: [sda] 30629376 512-byte logical blocks: (15.7 GB/14.6 GiB)
[ 18.326954] sd 1:0:0:0: [sda] Write Protect is off
[ 18.333329] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 18.333599] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 18.343001] sda: sda1
[ 18.349090] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 19.124530] device br0 entered promiscuous mode
[ 19.186463] br0: port 1(vlan1) entered blocking state
[ 19.186488] br0: port 1(vlan1) entered disabled state
[ 19.190839] device vlan1 entered promiscuous mode
[ 19.195528] device eth0 entered promiscuous mode
[ 19.200349] br0: port 1(vlan1) entered blocking state
[ 19.204904] br0: port 1(vlan1) entered forwarding state
[ 19.242653] br0: port 2(vlan2) entered blocking state
[ 19.245119] br0: port 2(vlan2) entered disabled state
[ 19.250417] device vlan2 entered promiscuous mode
[ 19.255223] br0: port 2(vlan2) entered blocking state
[ 19.259933] br0: port 2(vlan2) entered forwarding state
[ 19.271864] device br0 left promiscuous mode
[ 19.274118] device br0 entered promiscuous mode
[ 19.281554] device br0 left promiscuous mode
[ 19.349571] ath: EEPROM regdomain: 0x8348
[ 19.349576] ath: EEPROM indicates we should expect a country code
[ 19.349580] ath: doing EEPROM country->regdmn map search
[ 19.349584] ath: country maps to regdmn code: 0x3a
[ 19.349588] ath: Country alpha2 being used: US
[ 19.349591] ath: Regpair used: 0x3a
[ 19.349595] ath: regdomain 0x8348 dynamically updated by user
[ 19.349609] ath: EEPROM regdomain: 0x8348
[ 19.349612] ath: EEPROM indicates we should expect a country code
[ 19.349615] ath: doing EEPROM country->regdmn map search
[ 19.349619] ath: country maps to regdmn code: 0x3a
[ 19.349621] ath: Country alpha2 being used: US
[ 19.349624] ath: Regpair used: 0x3a
[ 19.349627] ath: regdomain 0x8348 dynamically updated by user
[ 21.857280] EXT4-fs (sda1): Ignoring removed nobh option
[ 21.860907] EXT4-fs (sda1): barriers disabled
[ 21.875803] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: init_itable=0,nobarrier,nobh,barrier=0
[ 23.635459] tun: Universal TUN/TAP device driver, 1.6
[ 23.635479] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
root@EA8500:~# ps
PID USER VSZ STAT COMMAND
1 root 1028 S /sbin/init
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
4 root 0 SW [kworker/0:0]
5 root 0 SW< [kworker/0:0H]
6 root 0 SW [kworker/u4:0]
7 root 0 SW [rcu_sched]
8 root 0 SW [rcu_bh]
9 root 0 SW [migration/0]
10 root 0 SW< [lru-add-drain]
11 root 0 SW [cpuhp/0]
12 root 0 SW [cpuhp/1]
13 root 0 SW [migration/1]
14 root 0 SW [ksoftirqd/1]
15 root 0 SW [kworker/1:0]
16 root 0 SW< [kworker/1:0H]
17 root 0 SW [oom_reaper]
18 root 0 SW< [writeback]
19 root 0 SW [kcompactd0]
20 root 0 SW< [crypto]
21 root 0 SW< [bioset]
22 root 0 SW< [kblockd]
23 root 0 SW< [watchdogd]
25 root 0 SW [kworker/0:1]
42 root 0 SW [kswapd0]
43 root 0 SW< [vmstat]
69 root 0 SW< [cryptodev_queue]
70 root 0 SW [kworker/u4:1]
72 root 0 SW< [bioset]
73 root 0 SW< [bioset]
74 root 0 SW< [bioset]
75 root 0 SW< [bioset]
76 root 0 SW< [bioset]
77 root 0 SW< [bioset]
78 root 0 SW [kworker/1:1]
79 root 0 SW< [bioset]
80 root 0 SW< [bioset]
81 root 0 SW< [bioset]
82 root 0 SW< [bioset]
83 root 0 SW< [bioset]
84 root 0 SW< [bioset]
85 root 0 SW< [bioset]
86 root 0 SW< [bioset]
87 root 0 SW< [bioset]
88 root 0 SW< [bioset]
89 root 0 SW< [bioset]
90 root 0 SW< [bioset]
91 root 0 SW< [bioset]
96 root 0 SW< [kworker/0:1H]
97 root 0 SW< [kworker/1:1H]
734 root 728 S /sbin/hotplug2 --set-rules-file /etc/hotplug2.rules --persistent
738 root 776 S /sbin/mstpd
746 root 1756 S watchdog
772 root 0 SW< [cfg80211]
779 root 0 SW< [ath10k_wq]
780 root 0 SW< [ath10k_aux_wq]
781 root 0 SW [kworker/u4:2]
783 root 0 SW< [ath10k_wq]
784 root 0 SW< [ath10k_aux_wq]
796 root 0 SW [kworker/0:2]
900 root 0 SW< [ata_sff]
905 root 0 SW [scsi_eh_0]
906 root 0 SW< [scsi_tmf_0]
908 root 0 SW [scsi_eh_1]
910 root 0 SW< [scsi_tmf_1]
911 root 0 SW [usb-storage]
937 root 0 SW< [bioset]
1063 root 0 SW [jbd2/sda1-8]
1064 root 0 SW< [ext4-rsv-conver]
1179 root 1324 S syslogd -Z -L
1182 root 1324 S klogd
1191 root 1052 S dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_rsa_key -p 22 -s
1224 root 3312 S /tmp/openvpnserver --config /tmp/openvpn/openvpn.conf --route-up /tmp/openvpn/route-up.sh --route-pre-
1283 root 2932 S usmbd -c /tmp/smb.conf -u /tmp/smb.db
1284 root 2960 S usmbd -c /tmp/smb.conf -u /tmp/smb.db
1285 root 0 SW [ksmbd-tun2]
1286 root 0 SW [ksmbd-br0]
1287 root 0 SW [ksmbd-vlan2]
1288 root 0 SW [ksmbd-vlan1]
1289 root 0 SW [ksmbd-teql0]
1290 root 0 SW [ksmbd-eth1]
1291 root 0 SW [ksmbd-eth0]
1292 root 0 SW [ksmbd-lo]
1304 root 1732 S dnsmasq -u root -g root --conf-file=/tmp/dnsmasq.conf
1309 root 1716 S wland
1421 root 704 S cron
1434 root 1428 S resetbutton
1453 root 1756 S process_monitor
1460 root 4796 S httpd -n -p 80
1574 root 1112 R dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_rsa_key -p 22 -s
1575 root 1324 S -sh
1578 root 1324 R ps
root@EA8500:~# exit
Connection to ea8500.mrjcd.com closed.
mrjcd@Deb:~$