r40438 QOS is now fixed to good as it ever was  ....thanks BS :')

NOTE:
Shortcut Forwarding Engine is disabled if QOS is enabled
shortcut_fe mod is gone when QOS is enabled.
And it don't make NO nevermind what the http://192.168.1.1/index.asp says.
I like it --- that's way it should be for all to work YAY!!!

|
|
|
|
|

QOS test mostly DD-WRT defauts but for time zone, and disbaled NO DNS rebind

HTB FQ_CODEL set at (DL=100000/ UL=50000)
mrjcd@Deb:~$ iperf3 -c bigdeb.mrjcd.com
Connecting to host bigdeb.mrjcd.com, port 5201
[  5] local 192.168.1.137 port 32856 connected to 10.72.28.10 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  6.11 MBytes  51.3 Mbits/sec   40   35.4 KBytes       
[  5]   1.00-2.00   sec  5.41 MBytes  45.4 Mbits/sec   35   45.2 KBytes       
[  5]   2.00-3.00   sec  5.78 MBytes  48.5 Mbits/sec   38   36.8 KBytes       
[  5]   3.00-4.00   sec  5.41 MBytes  45.4 Mbits/sec   28   42.4 KBytes       
[  5]   4.00-5.00   sec  5.78 MBytes  48.5 Mbits/sec   38   35.4 KBytes       
[  5]   5.00-6.00   sec  5.41 MBytes  45.4 Mbits/sec   20   52.3 KBytes       
[  5]   6.00-7.00   sec  5.59 MBytes  46.9 Mbits/sec   35   39.6 KBytes       
[  5]   7.00-8.00   sec  5.59 MBytes  46.9 Mbits/sec   35   43.8 KBytes       
[  5]   8.00-9.00   sec  5.59 MBytes  46.9 Mbits/sec   45   39.6 KBytes       
[  5]   9.00-10.00  sec  5.59 MBytes  46.9 Mbits/sec   30   39.6 KBytes       
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  56.3 MBytes  47.2 Mbits/sec  344             sender
[  5]   0.00-10.06  sec  55.9 MBytes  46.6 Mbits/sec                  receiver

iperf Done.
mrjcd@Deb:~$ iperf3 -c bigdeb.mrjcd.com -R
Connecting to host bigdeb.mrjcd.com, port 5201
Reverse mode, remote host bigdeb.mrjcd.com is sending
[  5] local 192.168.1.137 port 32930 connected to 10.72.28.10 port 5201
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  11.7 MBytes  98.3 Mbits/sec                  
[  5]   1.00-2.00   sec  11.5 MBytes  96.6 Mbits/sec                  
[  5]   2.00-3.00   sec  11.0 MBytes  92.5 Mbits/sec                  
[  5]   3.00-4.00   sec  11.5 MBytes  96.5 Mbits/sec                  
[  5]   4.00-5.00   sec  11.0 MBytes  92.5 Mbits/sec                  
[  5]   5.00-6.00   sec  11.5 MBytes  96.5 Mbits/sec                  
[  5]   6.00-7.00   sec  11.0 MBytes  92.5 Mbits/sec                  
[  5]   7.00-8.00   sec  11.5 MBytes  96.5 Mbits/sec                  
[  5]   8.00-9.00   sec  11.0 MBytes  92.5 Mbits/sec                  
[  5]   9.00-10.00  sec  11.5 MBytes  96.5 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.14  sec   116 MBytes  96.2 Mbits/sec  131             sender
[  5]   0.00-10.00  sec   113 MBytes  95.1 Mbits/sec                  receiver

iperf Done.

HTB PIE set at (DL=100000/ UL=50000
mrjcd@Deb:~$ iperf3 -c bigdeb.mrjcd.com
Connecting to host bigdeb.mrjcd.com, port 5201
[  5] local 192.168.1.137 port 33172 connected to 10.72.28.10 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  7.40 MBytes  62.0 Mbits/sec    0    322 KBytes       
[  5]   1.00-2.00   sec  5.59 MBytes  46.9 Mbits/sec   26   77.8 KBytes       
[  5]   2.00-3.00   sec  5.47 MBytes  45.9 Mbits/sec    5    100 KBytes       
[  5]   3.00-4.00   sec  5.47 MBytes  45.9 Mbits/sec    0    137 KBytes       
[  5]   4.00-5.00   sec  5.47 MBytes  45.9 Mbits/sec    4    116 KBytes       
[  5]   5.00-6.00   sec  5.59 MBytes  46.9 Mbits/sec   12   72.1 KBytes       
[  5]   6.00-7.00   sec  5.47 MBytes  45.9 Mbits/sec    0    116 KBytes       
[  5]   7.00-8.00   sec  6.15 MBytes  51.6 Mbits/sec    0    148 KBytes       
[  5]   8.00-9.00   sec  5.53 MBytes  46.4 Mbits/sec   14   87.7 KBytes       
[  5]   9.00-10.00  sec  5.47 MBytes  45.9 Mbits/sec    0    129 KBytes       
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  57.6 MBytes  48.3 Mbits/sec   61             sender
[  5]   0.00-10.04  sec  55.9 MBytes  46.7 Mbits/sec                  receiver

iperf Done.
mrjcd@Deb:~$ iperf3 -c bigdeb.mrjcd.com -R
Connecting to host bigdeb.mrjcd.com, port 5201
Reverse mode, remote host bigdeb.mrjcd.com is sending
[  5] local 192.168.1.137 port 33248 connected to 10.72.28.10 port 5201
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  11.7 MBytes  98.2 Mbits/sec                  
[  5]   1.00-2.00   sec  11.0 MBytes  92.5 Mbits/sec                  
[  5]   2.00-3.00   sec  11.5 MBytes  96.5 Mbits/sec                  
[  5]   3.00-4.00   sec  11.0 MBytes  92.5 Mbits/sec                  
[  5]   4.00-5.00   sec  11.5 MBytes  96.5 Mbits/sec                  
[  5]   5.00-6.00   sec  10.9 MBytes  91.6 Mbits/sec                  
[  5]   6.00-7.00   sec  11.6 MBytes  97.4 Mbits/sec                  
[  5]   7.00-8.00   sec  11.5 MBytes  96.5 Mbits/sec                  
[  5]   8.00-9.00   sec  11.0 MBytes  92.5 Mbits/sec                  
[  5]   9.00-10.00  sec  11.5 MBytes  96.5 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.06  sec   116 MBytes  97.1 Mbits/sec   25             sender
[  5]   0.00-10.00  sec   113 MBytes  95.1 Mbits/sec                  receiver

iperf Done.

HFSC FQ_CODEL set at (DL=51000/ UL=51000) which is normally what I run with my ISP connection
mrjcd@Deb:~$ iperf3 -c bigdeb.mrjcd.com
Connecting to host bigdeb.mrjcd.com, port 5201
[  5] local 192.168.1.137 port 33930 connected to 10.72.28.10 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  5.89 MBytes  49.4 Mbits/sec   25   56.6 KBytes       
[  5]   1.00-2.00   sec  5.84 MBytes  49.0 Mbits/sec   25   49.5 KBytes       
[  5]   2.00-3.00   sec  5.47 MBytes  45.9 Mbits/sec   15   55.1 KBytes       
[  5]   3.00-4.00   sec  5.84 MBytes  49.0 Mbits/sec   23   62.2 KBytes       
[  5]   4.00-5.00   sec  5.47 MBytes  45.9 Mbits/sec   30   45.2 KBytes       
[  5]   5.00-6.00   sec  5.84 MBytes  49.0 Mbits/sec   15   60.8 KBytes       
[  5]   6.00-7.00   sec  5.47 MBytes  45.9 Mbits/sec   30   46.7 KBytes       
[  5]   7.00-8.00   sec  5.78 MBytes  48.5 Mbits/sec   15   56.6 KBytes       
[  5]   8.00-9.00   sec  5.41 MBytes  45.4 Mbits/sec   21   62.2 KBytes       
[  5]   9.00-10.00  sec  5.97 MBytes  50.0 Mbits/sec   25   46.7 KBytes       
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  57.0 MBytes  47.8 Mbits/sec  224             sender
[  5]   0.00-10.04  sec  56.5 MBytes  47.2 Mbits/sec                  receiver

iperf Done.
mrjcd@Deb:~$ iperf3 -c bigdeb.mrjcd.com -R
Connecting to host bigdeb.mrjcd.com, port 5201
Reverse mode, remote host bigdeb.mrjcd.com is sending
[  5] local 192.168.1.137 port 33996 connected to 10.72.28.10 port 5201
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  5.96 MBytes  50.0 Mbits/sec                  
[  5]   1.00-2.00   sec  5.61 MBytes  47.0 Mbits/sec                  
[  5]   2.00-3.00   sec  5.87 MBytes  49.2 Mbits/sec                  
[  5]   3.00-4.00   sec  5.59 MBytes  46.9 Mbits/sec                  
[  5]   4.00-5.00   sec  5.89 MBytes  49.4 Mbits/sec                  
[  5]   5.00-6.00   sec  5.49 MBytes  46.0 Mbits/sec                  
[  5]   6.00-7.00   sec  5.87 MBytes  49.2 Mbits/sec                  
[  5]   7.00-8.00   sec  5.60 MBytes  47.0 Mbits/sec                  
[  5]   8.00-9.00   sec  5.87 MBytes  49.2 Mbits/sec                  
[  5]   9.00-10.00  sec  5.60 MBytes  46.9 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.04  sec  57.7 MBytes  48.2 Mbits/sec   46             sender
[  5]   0.00-10.00  sec  57.3 MBytes  48.1 Mbits/sec                  receiver

iperf Done.
mrjcd@Deb:~$ telnet 192.168.1.1
Trying 192.168.1.1...
Connected to 192.168.1.1.
Escape character is '^]'.

DD-WRT v3.0-r40438 std (c) 2019 NewMedia-NET GmbH
Release: 07/25/19
Board: Linksys EA8500

DD-WRT login: root
Password: 
==========================================================
 
     ___  ___     _      _____  ______       ____  ___ 
    / _ \/ _ \___| | /| / / _ \/_  __/ _  __|_  / / _ \
   / // / // /___/ |/ |/ / , _/ / /   | |/ //_ <_/ // /
  /____/____/    |__/|__/_/|_| /_/    |___/____(_)___/ 
                                                     
                       DD-WRT v3.0
                   http://www.dd-wrt.com
 
==========================================================


BusyBox v1.31.0 (2019-07-25 12:06:32 CEST) built-in shell (ash)

root@DD-WRT:~# uptime
 10:03:29 up 23 min,  load average: 0.03, 0.04, 0.02
root@DD-WRT:~# date
Thu Jul 25 10:03:34 CDT 2019
root@DD-WRT:~# exit
Connection closed by foreign host.
mrjcd@Deb:~$ neofetch
       _,met$$$$$gg.          mrjcd@Deb 
    ,g$$$$$$$$$$$$$$$P.       --------- 
  ,g$$P"     """Y$$.".        OS: Debian GNU/Linux bullseye/sid x86_64 
 ,$$P'              `$$$.     Host: CM1630 
',$$P       ,ggs.     `$$b:   Kernel: 4.19.0-5-amd64 
`d$$'     ,$P"'   .    $$$    Uptime: 14 hours, 43 mins 
 $$P      d$'     ,    $$P    Packages: 2006 (dpkg) 
 $$:      $$.   -    ,d$$'    Shell: bash 5.0.3 
 $$;      Y$b._   _,d$P'      Resolution: 1366x768, 1440x900 
 Y$$.    `.`"Y$$$$P"'         DE: GNOME 3.30.2 
 `$$b      "-.__              WM: GNOME Shell 
  `Y$$                        WM Theme: Adwaita 
   `Y$$.                      Theme: Adwaita [GTK2/3] 
     `$$b.                    Icons: gnome [GTK2/3] 
       `Y$$b.                 Terminal: gnome-terminal 
          `"Y$b._             CPU: AMD Athlon II X2 220 (2) @ 2.800GHz 
              `"""            GPU: AMD ATI Radeon 3000 
                              Memory: 1554MiB / 9742MiB