DD-WRT v3.0-r36500M kongat (c) 2018 NewMedia-NET GmbH Release: 08/06/18 Citadel-Station-Homeworld login: root Password: ========================================================== ___ ___ _ _____ ______ ____ ___ / _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \ / // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // / /____/____/ |__/|__/_/|_| /_/ |___/____(_)___/ DD-WRT v3.0 http://www.dd-wrt.com ========================================================== BusyBox v1.28.3 (2018-08-06 18:00:05 CEST) built-in shell (ash) root@Citadel-Station-Homeworld:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.18.117 (bluebat@helios) (gcc version 6.3.0 (LEDE GCC 6.3.0 r4639-eb43a817f7) ) #347 SMP PREEMPT Mon Aug 6 18:02:24 CEST 2018 [ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Linksys EA8500 WiFi Router [ 0.000000] Ignoring memory range 0x41500000 - 0x42000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 122880 [ 0.000000] free_area_init_node: node 0, pgdat c0736700, node_mem_map ddb40000 [ 0.000000] Normal zone: 960 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 122880 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 9 pages/cpu @ddfd3000 s7552 r8192 d21120 u36864 [ 0.000000] pcpu-alloc: s7552 r8192 d21120 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920 [ 0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:16 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 481164K/491520K available (3926K kernel code, 283K rwdata, 1124K rodata, 188K init, 371K bss, 10356K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xde800000 - 0xff000000 ( 520 MB) [ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc06f6e04 (5052 kB) [ 0.000000] .init : 0xc06f7000 - 0xc0726000 ( 188 kB) [ 0.000000] .data : 0xc0726000 - 0xc076ce44 ( 284 kB) [ 0.000000] .bss : 0xc076ce44 - 0xc07c9b94 ( 372 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000011] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 687194767200ns [ 0.000028] Switching to timer-based delay loop, resolution 160ns [ 0.000447] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500) [ 0.000470] pid_max: default: 32768 minimum: 301 [ 0.000665] Security Framework initialized [ 0.000770] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000785] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001452] CPU: Testing write buffer coherency: ok [ 0.001732] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002249] Setting up static identity map for 0x42213778 - 0x422137d0 [ 0.063431] CPU1: Booted secondary processor [ 0.063536] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.063647] Brought up 2 CPUs [ 0.063672] SMP: Total of 2 processors activated (25.00 BogoMIPS). [ 0.063683] CPU: All CPU(s) started in SVC mode. [ 0.078650] VFP support v0.3: implementor 51 architecture 0 part 4d variant 2 rev 0 [ 0.079155] pinctrl core: initialized pinctrl subsystem [ 0.089398] NET: Registered protocol family 16 [ 0.089726] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.113850] cpuidle: using governor ladder [ 0.144866] cpuidle: using governor menu [ 0.164001] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342 [ 0.164078] qcom_rpm 108000.rpm: failed to mark ack irq as wakeup [ 0.164136] qcom_rpm 108000.rpm: failed to mark wakeup irq as wakeup [ 0.199517] pps_core: LinuxPPS API ver. 1 registered [ 0.199532] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.199572] PTP clock support registered [ 0.200702] pcie_init: pcie_init: unable to create IPC log context for pcie0-short [ 0.200718] pcie_init: pcie_init: unable to create IPC log context for pcie0-long [ 0.200729] pcie_init: pcie_init: unable to create IPC log context for pcie1-short [ 0.200741] pcie_init: pcie_init: unable to create IPC log context for pcie1-long [ 0.201146] Switched to clocksource dg_timer [ 0.202541] NET: Registered protocol family 2 [ 0.203270] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.203306] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.203359] TCP: Hash tables configured (established 4096 bind 4096) [ 0.203407] TCP: reno registered [ 0.203428] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.203448] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.203688] NET: Registered protocol family 1 [ 0.203759] PCI: CLS 0 bytes, default 64 [ 0.204930] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.205042] Crashlog allocated RAM at address 0x5ff00000 [ 0.205927] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.205961] msgmni has been set to 939 [ 0.211767] io scheduler noop registered [ 0.211789] io scheduler deadline registered (default) [ 0.213178] 1b500000.pci supply vdda not found, using dummy regulator [ 0.213282] 1b500000.pci supply vdda_phy not found, using dummy regulator [ 0.213361] 1b500000.pci supply vdda_refclk not found, using dummy regulator [ 0.243326] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00 [ 0.243350] pci_bus 0000:00: root bus resource [io 0xfe00000-0xfffff] (bus address [0x1fc00000-0xfefffff]) [ 0.243364] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff] [ 0.243380] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.243430] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400 [ 0.243572] pci 0000:00:00.0: supports D1 [ 0.243586] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 0.243895] PCI: bus0: Fast back to back transfers disabled [ 0.244257] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000 [ 0.244475] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 0.245496] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.245926] PCI: bus1: Fast back to back transfers disabled [ 0.245946] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.246103] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff] [ 0.246125] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit] [ 0.246243] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.246263] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff] [ 0.246724] aer 0000:00:00.0:pcie02: service driver aer loaded [ 0.247097] 1b700000.pci supply vdda not found, using dummy regulator [ 0.247182] 1b700000.pci supply vdda_phy not found, using dummy regulator [ 0.247266] 1b700000.pci supply vdda_refclk not found, using dummy regulator [ 0.279261] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00 [ 0.279282] pci_bus 0001:00: root bus resource [io 0x31e10000-0xfffff] (bus address [0x63c00000-0x31eeffff]) [ 0.279298] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff] [ 0.279314] pci_bus 0001:00: root bus resource [bus 00-ff] [ 0.279357] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400 [ 0.279478] pci 0001:00:00.0: supports D1 [ 0.279492] pci 0001:00:00.0: PME# supported from D0 D1 D3hot [ 0.279792] PCI: bus0: Fast back to back transfers disabled [ 0.280134] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000 [ 0.280345] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 0.281430] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold [ 0.281863] PCI: bus1: Fast back to back transfers disabled [ 0.281880] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.282101] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff] [ 0.282122] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit] [ 0.282235] pci 0001:00:00.0: PCI bridge to [bus 01] [ 0.282254] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff] [ 0.282648] aer 0001:00:00.0:pcie02: service driver aer loaded [ 0.283011] 1b900000.pci supply vdda not found, using dummy regulator [ 0.283095] 1b900000.pci supply vdda_phy not found, using dummy regulator [ 0.283173] 1b900000.pci supply vdda_refclk not found, using dummy regulator [ 0.418088] qcom-pcie 1b900000.pci: link initialization failed [ 0.419692] qcom-pcie 1b900000.pci: PCI host bridge to bus 0002:00 [ 0.419711] pci_bus 0002:00: root bus resource [io 0x35e20000-0xfffff] (bus address [0x6bc00000-0x35edffff]) [ 0.419727] pci_bus 0002:00: root bus resource [mem 0x32000000-0x35dfffff] [ 0.419743] pci_bus 0002:00: root bus resource [bus 00-ff] [ 0.419792] PCI: bus0: Fast back to back transfers enabled [ 0.422421] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0 [ 0.423764] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.424760] msm_serial 16340000.serial: msm_serial: detected port #0 [ 0.424853] msm_serial 16340000.serial: uartclk = 1843200 [ 0.424911] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 184, base_baud = 115200) is a MSM [ 0.424966] msm_serial: console setup on port #0 [ 1.143443] console [ttyMSM0] enabled [ 1.148209] msm_serial: driver initialized [ 1.154983] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1 [ 1.155487] nand: AMD/Spansion S34MS01G2 [ 1.162066] nand: 128MiB, SLC, page size: 2048, OOB size: 64 [ 1.165908] Scanning device for bad blocks [ 1.590139] random: nonblocking pool is initialized [ 1.895909] 19 ofpart partitions found on MTD device qcom-nandc [ 1.895937] Creating 19 MTD partitions on "qcom-nandc": [ 1.900634] 0x000000000000-0x000000040000 : "SBL1" [ 1.906815] 0x000000040000-0x000000180000 : "MIBIB" [ 1.911564] 0x000000180000-0x0000002c0000 : "SBL2" [ 1.916242] 0x0000002c0000-0x000000540000 : "SBL3" [ 1.921075] 0x000000540000-0x000000660000 : "DDRCONFIG" [ 1.925941] 0x000000660000-0x000000780000 : "SSD" [ 1.930988] 0x000000780000-0x000000a00000 : "TZ" [ 1.935948] 0x000000a00000-0x000000c80000 : "RPM" [ 1.940539] 0x000000c80000-0x000000dc0000 : "art" [ 1.945220] 0x000000dc0000-0x000000ec0000 : "APPSBL" [ 1.949848] 0x000000ec0000-0x000000f00000 : "u_env" [ 1.954972] 0x000000f00000-0x000000f40000 : "s_env" [ 1.959493] 0x000000f40000-0x000000f80000 : "devinfo" [ 1.964408] 0x000000f80000-0x000003780000 : "linux" [ 1.969565] 0x000001280000-0x000003780000 : "rootfs" [ 1.974332] mtd: partition "rootfs" set to be root filesystem [ 1.978679] 0x000003780000-0x000005f40000 : "linux2" [ 1.985172] 0x000003a80000-0x000005f40000 : "rootfs2" [ 1.990166] 0x000005f40000-0x000005f80000 : "nvram" [ 1.995139] 0x000005f80000-0x000008000000 : "ddwrt" [ 2.000704] libphy: Fixed MDIO Bus: probed [ 2.004326] libphy: GPIO Bitbanged MDIO: probed [ 2.029276] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0 [ 2.833393] stmmac - user ID: 0x10, Synopsys ID: 0x37 [ 2.833418] Ring mode enabled [ 2.837416] DMA HW capability register supported [ 2.840368] Enhanced/Alternate descriptors [ 2.845148] Enabled extended descriptors [ 2.849136] RX Checksum Offload Engine supported (type 2) [ 2.853364] TX Checksum insertion supported [ 2.858683] Wake-Up On Lan supported [ 2.863235] Enable RX Mitigation via HW Watchdog Timer [ 2.867937] stmmac - user ID: 0x10, Synopsys ID: 0x37 [ 2.871819] Ring mode enabled [ 2.876911] DMA HW capability register supported [ 2.879866] Enhanced/Alternate descriptors [ 2.884638] Enabled extended descriptors [ 2.888631] RX Checksum Offload Engine supported (type 2) [ 2.892882] TX Checksum insertion supported [ 2.898180] Wake-Up On Lan supported [ 2.902723] Enable RX Mitigation via HW Watchdog Timer [ 2.906829] PPP generic driver version 2.4.2 [ 2.911361] PPP BSD Compression module registered [ 2.915813] PPP Deflate Compression module registered [ 2.920338] PPP MPPE Compression module registered [ 2.925454] NET: Registered protocol family 24 [ 2.930073] i2c /dev entries driver [ 2.940108] Speed bin: 0 [ 2.940129] PVS bin: 1 [ 2.942184] platform cpufreq-krait.0: Driver cpufreq-krait requests probe deferral [ 2.945823] L2 @ QSB rate. Forcing new rate. [ 2.951723] L2 @ 387500 KHz [ 2.955976] CPU0 @ 800000 KHz [ 2.958367] CPU1 @ QSB rate. Forcing new rate. [ 2.961674] CPU1 @ 384000 KHz [ 2.966137] GACT probability NOT on [ 2.968887] Mirror/redirect action on [ 2.972285] Simple TC action Loaded [ 2.976797] netem: version 1.3 [ 2.979359] u32 classifier [ 2.982481] Performance counters on [ 2.985102] input device check on [ 2.988838] Actions configured [ 2.992793] Netfilter messages via NETLINK v0.30. [ 2.996025] nf_conntrack version 0.5.0 (7518 buckets, 30072 max) [ 3.001061] nf_conntrack_rtsp v0.7 loading [ 3.007336] xt_time: kernel timezone is -0000 [ 3.010737] ip_set: protocol 6 [ 3.015480] gre: GRE over IPv4 demultiplexor driver [ 3.018343] nf_nat_rtsp v0.7 loading [ 3.022982] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.026962] TCP: bic registered [ 3.032078] TCP: cubic registered [ 3.034854] TCP: westwood registered [ 3.038328] TCP: highspeed registered [ 3.042034] TCP: hybla registered [ 3.045529] TCP: htcp registered [ 3.048829] TCP: vegas registered [ 3.052312] TCP: veno registered [ 3.055340] TCP: scalable registered [ 3.058637] TCP: lp registered [ 3.062280] TCP: yeah registered [ 3.065063] TCP: illinois registered [ 3.068453] NET: Registered protocol family 17 [ 3.072159] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 3.076309] Bridge firewalling registered [ 3.089116] 8021q: 802.1Q VLAN Support v1.8 [ 3.093108] Registering SWP/SWPB emulation handler [ 3.100439] Key type encrypted registered [ 3.104809] trying to register driver generic_krait [ 3.105869] Frequency table not initialized. [ 3.110664] Frequency table not initialized. [ 3.115164] Frequency table not initialized. [ 3.119308] Frequency table not initialized. [ 3.123627] Frequency table not initialized. [ 3.129354] Frequency table not initialized. [ 3.132225] Frequency table not initialized. [ 3.136333] Frequency table not initialized. [ 3.140572] Frequency table not initialized. [ 3.144892] Frequency table not initialized. [ 3.149094] driver generic_krait up and running [ 3.153452] searching for nvram [ 3.157607] nvram size = -1066889586 [ 3.193656] UBI error: ubi_auto_attach: no valid UBI magic found inside mtd13 [ 3.193706] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 3.207926] UBIFS error (pid 1): ubifs_mount: cannot open "ubi0:rootfs", error -19 [ 3.210531] VFS: Mounted root (squashfs filesystem) readonly on device 31:16. [ 3.214579] Freeing unused kernel memory: 188K [ 5.869173] UBIFS error (pid 744): ubifs_mount: cannot open "ubi0:rootfs_data", error -19 [ 6.133916] lzma_compress: module license 'unspecified' taints kernel. [ 6.133950] Disabling lock debugging due to kernel taint [ 6.212052] Loading modules backported from Linux version wireless-drivers-next-for-davem-2017-09-01-0-geb464d4a8d09 [ 6.212099] Backport generated by backports.git backports-20160324-111-g97b8d7c4 [ 6.782879] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142) [ 6.783508] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 6.923002] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2 [ 6.923054] ath10k_pci 0000:01:00.0: Falling back to user helper [ 6.943689] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2 [ 6.943728] ath10k_pci 0000:01:00.0: Falling back to user helper [ 7.248490] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002 [ 7.248538] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0 [ 7.259755] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.5.3-00050 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 5ae23169 [ 9.603352] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002 from ath10k/QCA99X0/hw2.0/board-2.bin [ 9.603550] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 3e376c3f [ 10.817126] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1 [ 10.894645] ath: EEPROM regdomain: 0x0 [ 10.894670] ath: EEPROM indicates default country code should be used [ 10.894688] ath: doing EEPROM country->regdmn map search [ 10.894712] ath: country maps to regdmn code: 0x3a [ 10.894730] ath: Country alpha2 being used: US [ 10.894746] ath: Regpair used: 0x3a [ 10.909505] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142) [ 10.910264] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 11.053309] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0001:01:00.0.bin failed with error -2 [ 11.053352] ath10k_pci 0001:01:00.0: Falling back to user helper [ 11.064890] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2 [ 11.069069] ath10k_pci 0001:01:00.0: Falling back to user helper [ 11.081158] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002 [ 11.085836] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0 [ 11.098322] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.5.3-00050 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 5ae23169 [ 13.410706] ath10k_pci 0001:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002 from ath10k/QCA99X0/hw2.0/board-2.bin [ 13.410893] ath10k_pci 0001:01:00.0: board_file api 1 bmi_id N/A crc32 eca6e637 [ 14.625394] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1 [ 14.693683] ath: EEPROM regdomain: 0x0 [ 14.693698] ath: EEPROM indicates default country code should be used [ 14.693710] ath: doing EEPROM country->regdmn map search [ 14.693726] ath: country maps to regdmn code: 0x3a [ 14.693738] ath: Country alpha2 being used: US [ 14.693749] ath: Regpair used: 0x3a [ 15.766814] usbcore: registered new interface driver usbfs [ 15.767236] usbcore: registered new interface driver hub [ 15.771426] usbcore: registered new device driver usb [ 15.816623] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 15.825465] ehci-platform: EHCI generic platform driver [ 15.846983] ehci-pci: EHCI PCI platform driver [ 15.889722] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 16.106713] soc:usb30@0 supply gdsc not found, using dummy regulator [ 16.107831] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 16.112320] soc:usb30@1 supply gdsc not found, using dummy regulator [ 16.112426] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 16.125825] platform 10000000.dwc3: Driver dwc3 requests probe deferral [ 16.131732] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 16.138606] platform 10000000.dwc3: Driver dwc3 requests probe deferral [ 16.168788] 100f8800.phy supply vddcx not found, using dummy regulator [ 16.168896] 100f8800.phy supply v3p3 not found, using dummy regulator [ 16.174395] 100f8800.phy supply v1p8 not found, using dummy regulator [ 16.180763] 100f8800.phy supply vbus not found, using dummy regulator [ 16.187373] 110f8800.phy supply vddcx not found, using dummy regulator [ 16.187510] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 16.187670] platform 10000000.dwc3: Driver dwc3 requests probe deferral [ 16.206609] 110f8800.phy supply v3p3 not found, using dummy regulator [ 16.213196] 110f8800.phy supply v1p8 not found, using dummy regulator [ 16.219742] 110f8800.phy supply vbus not found, using dummy regulator [ 16.226665] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 16.233124] platform 10000000.dwc3: Driver dwc3 requests probe deferral [ 16.246005] 100f8830.phy supply vddcx not found, using dummy regulator [ 16.246096] 100f8830.phy supply v1p8 not found, using dummy regulator [ 16.252387] qcom-dwc3-ssphy 100f8830.phy: cannot get HSIO settings from device node, using default values [ 16.258820] 110f8830.phy supply vddcx not found, using dummy regulator [ 16.258961] platform 11000000.dwc3: Driver dwc3 requests probe deferral [ 16.259217] qcom-dwc3-hsphy 100f8800.phy: cannot set voltage for vddcx [ 16.259224] qcom-dwc3-hsphy 100f8800.phy: cannot set voltage for v3p3 [ 16.259229] qcom-dwc3-hsphy 100f8800.phy: cannot set voltage for v1p8 [ 16.261627] qcom-dwc3-ssphy 100f8830.phy: cannot set voltage for vddcx [ 16.300978] 110f8830.phy supply v1p8 not found, using dummy regulator [ 16.307247] qcom-dwc3-ssphy 110f8830.phy: cannot get HSIO settings from device node, using default values [ 16.502772] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 16.502871] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 16.507338] xhci-hcd xhci-hcd.0.auto: irq 237, io mem 0x10000000 [ 16.515864] hub 1-0:1.0: USB hub found [ 16.521500] hub 1-0:1.0: 1 port detected [ 16.524948] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 16.528604] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 16.535416] hub 2-0:1.0: USB hub found [ 16.541754] hub 2-0:1.0: 1 port detected [ 16.545968] qcom-dwc3-hsphy 110f8800.phy: cannot set voltage for vddcx [ 16.549336] qcom-dwc3-hsphy 110f8800.phy: cannot set voltage for v3p3 [ 16.555943] qcom-dwc3-hsphy 110f8800.phy: cannot set voltage for v1p8 [ 16.564730] qcom-dwc3-ssphy 110f8830.phy: cannot set voltage for vddcx [ 16.812624] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 16.812672] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 16.817185] xhci-hcd xhci-hcd.1.auto: irq 142, io mem 0x11000000 [ 16.825648] hub 3-0:1.0: USB hub found [ 16.831033] hub 3-0:1.0: 1 port detected [ 16.834860] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 16.838552] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 16.844859] hub 4-0:1.0: USB hub found [ 16.851725] hub 4-0:1.0: 1 port detected [ 17.152771] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 17.542788] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 21.317649] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 21.317693] usb usb4: USB disconnect, device number 1 [ 21.323832] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered [ 21.326757] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 21.332962] usb usb3: USB disconnect, device number 1 [ 21.337397] usb 3-1: USB disconnect, device number 2 [ 21.347325] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered [ 21.347528] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 21.361512] usb usb2: USB disconnect, device number 1 [ 21.363407] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 21.365570] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 21.376468] usb usb1: USB disconnect, device number 1 [ 21.378116] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 21.396061] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 21.396150] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 21.400771] xhci-hcd xhci-hcd.0.auto: irq 237, io mem 0x10000000 [ 21.409234] hub 1-0:1.0: USB hub found [ 21.414544] hub 1-0:1.0: 1 port detected [ 21.418295] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 21.422127] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 21.428350] hub 2-0:1.0: USB hub found [ 21.434882] hub 2-0:1.0: 1 port detected [ 21.439210] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 21.442729] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 21.448122] xhci-hcd xhci-hcd.1.auto: irq 142, io mem 0x11000000 [ 21.456791] hub 3-0:1.0: USB hub found [ 21.462008] hub 3-0:1.0: 1 port detected [ 21.465736] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 21.469481] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 21.475809] hub 4-0:1.0: USB hub found [ 21.482311] hub 4-0:1.0: 1 port detected [ 21.515695] SCSI subsystem initialized [ 21.615192] usbcore: registered new interface driver usb-storage [ 21.692344] libata version 3.00 loaded. [ 21.763538] ahci 29000000.sata: forcing port_map 0x0 -> 0x1 [ 21.763607] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 21.767927] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst [ 21.778331] scsi host0: ahci_platform [ 21.785803] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 241 [ 21.791548] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 21.940283] usb-storage 3-1:1.0: USB Mass Storage device detected [ 21.940606] scsi host1: usb-storage 3-1:1.0 [ 22.131836] ata1: SATA link down (SStatus 0 SControl 300) [ 22.946872] scsi 1:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4 [ 22.949510] sd 1:0:0:0: [sda] 31457280 512-byte logical blocks: (16.1 GB/15.0 GiB) [ 22.955076] sd 1:0:0:0: [sda] Write Protect is off [ 22.961766] sd 1:0:0:0: [sda] Mode Sense: 23 00 00 00 [ 22.962506] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 22.969975] sda: sda1 [ 22.978229] sd 1:0:0:0: [sda] Attached SCSI removable disk [ 23.263706] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended [ 23.268272] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [ 23.445718] using kernel STP [ 23.752125] device br0 entered promiscuous mode [ 23.809996] device vlan1 entered promiscuous mode [ 23.810025] device eth0 entered promiscuous mode [ 23.813945] br0: port 1(vlan1) entered forwarding state [ 23.818386] br0: port 1(vlan1) entered forwarding state [ 23.829372] device br0 left promiscuous mode [ 23.833409] device br0 entered promiscuous mode [ 23.889759] device br0 left promiscuous mode [ 23.945129] ath: EEPROM regdomain: 0x8348 [ 23.945138] ath: EEPROM indicates we should expect a country code [ 23.945146] ath: doing EEPROM country->regdmn map search [ 23.945153] ath: country maps to regdmn code: 0x3a [ 23.945160] ath: Country alpha2 being used: US [ 23.945166] ath: Regpair used: 0x3a [ 23.945174] ath: regdomain 0x8348 dynamically updated by user [ 23.945192] ath: EEPROM regdomain: 0x8348 [ 23.945197] ath: EEPROM indicates we should expect a country code [ 23.945203] ath: doing EEPROM country->regdmn map search [ 23.945209] ath: country maps to regdmn code: 0x3a [ 23.945215] ath: Country alpha2 being used: US [ 23.945220] ath: Regpair used: 0x3a [ 23.945225] ath: regdomain 0x8348 dynamically updated by user [ 25.811516] br0: port 1(vlan1) entered forwarding state [ 29.776164] device ath0 entered promiscuous mode [ 31.916824] br0: port 2(ath0) entered forwarding state [ 31.916869] br0: port 2(ath0) entered forwarding state [ 31.921449] device ath0.1 entered promiscuous mode [ 31.929712] br1: port 1(ath0.1) entered listening state [ 31.930759] br1: port 1(ath0.1) entered listening state [ 33.553939] device ath1 entered promiscuous mode [ 33.911518] br0: port 2(ath0) entered forwarding state [ 34.302372] br0: port 3(ath1) entered forwarding state [ 34.302420] br0: port 3(ath1) entered forwarding state [ 34.313670] device ath1.1 entered promiscuous mode [ 34.318769] br1: port 2(ath1.1) entered listening state [ 34.318809] br1: port 2(ath1.1) entered listening state [ 34.749851] IMQ: autocreate imq0 NS c07670c0 [ 34.754925] IMQ: autocreate imq1 NS c07670c0 [ 34.755000] IMQ driver loaded successfully. (numdevs = 16, numqueues = 1) [ 34.758288] Hooking IMQ after NAT on PREROUTING. [ 34.794423] Hooking IMQ before NAT on POSTROUTING. [ 34.813099] device vlan2 entered promiscuous mode [ 35.466552] device vlan2 left promiscuous mode [ 36.301504] br0: port 3(ath1) entered forwarding state [ 36.824252] device vlan4 entered promiscuous mode [ 36.825313] br1: port 3(vlan4) entered listening state [ 36.829655] br1: port 3(vlan4) entered listening state [ 37.881569] IMQ: remove dev imq0 [ 37.881596] IMQ: remove dev imq1 [ 37.981745] IMQ driver unloaded successfully. [ 38.040589] IMQ: autocreate imq0 NS c07670c0 [ 38.042018] IMQ: autocreate imq1 NS c07670c0 [ 38.043936] IMQ driver loaded successfully. (numdevs = 16, numqueues = 1) [ 38.048266] Hooking IMQ after NAT on PREROUTING. [ 38.055482] Hooking IMQ before NAT on POSTROUTING. [ 39.003548] tun: Universal TUN/TAP device driver, 1.6 [ 39.003577] tun: (C) 1999-2004 Max Krasnyansky [ 46.971527] br1: port 1(ath0.1) entered learning state [ 49.334275] br1: port 2(ath1.1) entered learning state [ 51.851526] br1: port 3(vlan4) entered learning state [ 62.011592] br1: topology change detected, propagating [ 62.011643] br1: port 1(ath0.1) entered forwarding state [ 64.376272] br1: topology change detected, propagating [ 64.376321] br1: port 2(ath1.1) entered forwarding state [ 66.891521] br1: topology change detected, propagating [ 66.891556] br1: port 3(vlan4) entered forwarding state [ 84.945012] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead. [ 640.899330] Ebtables v2.0 registered [ 1461.521543] IMQ: remove dev imq0 [ 1461.521570] IMQ: remove dev imq1 [ 1461.601536] IMQ driver unloaded successfully. [ 1461.638437] IMQ: autocreate imq0 NS c07670c0 [ 1461.640115] IMQ: autocreate imq1 NS c07670c0 [ 1461.642107] IMQ driver loaded successfully. (numdevs = 16, numqueues = 1) [ 1461.647276] Hooking IMQ after NAT on PREROUTING. [ 1461.653203] Hooking IMQ before NAT on POSTROUTING. [ 7246.496279] ath10k_pci 0000:01:00.0: received unexpected tx_fetch_ind event: in push mode [ 7246.496332] ath10k_pci 0000:01:00.0: received unexpected tx_fetch_ind event: in push mode [ 7246.503538] ath10k_pci 0000:01:00.0: received unexpected tx_fetch_ind event: in push mode [ 7246.511623] ath10k_pci 0000:01:00.0: received unexpected tx_fetch_ind event: in push mode [43245.757526] ath10k_pci 0000:01:00.0: received unexpected tx_fetch_ind event: in push mode [43245.757762] ath10k_pci 0000:01:00.0: received unexpected tx_fetch_ind event: in push mode [43245.765502] ath10k_pci 0000:01:00.0: received unexpected tx_fetch_ind event: in push mode [43245.773304] ath10k_pci 0000:01:00.0: received unexpected tx_fetch_ind event: in push mode [43245.781180] ath10k_pci 0000:01:00.0: received unexpected tx_fetch_ind event: in push mode [43245.789758] ath10k_pci 0000:01:00.0: received unexpected tx_fetch_ind event: in push mode [43245.797823] ath10k_pci 0000:01:00.0: received unexpected tx_fetch_ind event: in push mode [43245.806059] ath10k_pci 0000:01:00.0: received unexpected tx_fetch_ind event: in push mode [43245.814092] ath10k_pci 0000:01:00.0: received unexpected tx_fetch_ind event: in push mode [43245.822400] ath10k_pci 0000:01:00.0: received unexpected tx_fetch_ind event: in push mode root@Citadel-Station-Homeworld:~# uptime 10:48:37 up 17:32, load average: 0.00, 0.01, 0.00 root@Citadel-Station-Homeworld:~# date Tue Aug 7 10:48:41 CDT 2018 root@Citadel-Station-Homeworld:~# exit Connection closed by foreign host. mrjcd@Deb:~$